From: Jagan Teki <jagan@amarulasolutions.com>
To: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>,
Icenowy Zheng <icenowy@aosc.io>,
devicetree <devicetree@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
linux-sunxi@googlegroups.com, Jagan Teki <jagan@openedev.com>
Subject: Re: [PATCH 5/7] arm64: allwinner: h6: Add RTC node
Date: Thu, 1 Nov 2018 13:03:43 +0530 [thread overview]
Message-ID: <CAMty3ZAW5KndyJj81obK49MKczdbk4SoUncmiiE_OhH1g7qFUA@mail.gmail.com> (raw)
In-Reply-To: <CAGb2v64fnpCh_rCy-9m8xgXmAZQGab1==f7cr332QfgueyuRNw@mail.gmail.com>
On Thu, Nov 1, 2018 at 8:25 AM Chen-Yu Tsai <wens@csie.org> wrote:
>
> On Thu, Nov 1, 2018 at 2:37 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
> >
> > From: Jagan Teki <jagan@openedev.com>
> >
> > RTC controller is similar to A31, so use the same compatible
> > for H6 and update interrupt numbers as per manual.
>
> No. Unfortunately they are not that compatible. The A31 does not have
> the RTC clock output. So everyone got it wrong. :( Plus the clock rate
> of the internal RC oscillator varies between SoCs. I'm working on a
> series of patches to correct this. Stay tuned.
4 bit, EXT_LOSC_EN of LOSC_CTRL_REG (0x00) seem available in H6. I can
see external clock working with WIFI for A31 compatible.
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
To: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Cc: Maxime Ripard
<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-arm-kernel
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
linux-kernel
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Jagan Teki <jagan-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
Subject: Re: [PATCH 5/7] arm64: allwinner: h6: Add RTC node
Date: Thu, 1 Nov 2018 13:03:43 +0530 [thread overview]
Message-ID: <CAMty3ZAW5KndyJj81obK49MKczdbk4SoUncmiiE_OhH1g7qFUA@mail.gmail.com> (raw)
In-Reply-To: <CAGb2v64fnpCh_rCy-9m8xgXmAZQGab1==f7cr332QfgueyuRNw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On Thu, Nov 1, 2018 at 8:25 AM Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org> wrote:
>
> On Thu, Nov 1, 2018 at 2:37 AM Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> wrote:
> >
> > From: Jagan Teki <jagan-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
> >
> > RTC controller is similar to A31, so use the same compatible
> > for H6 and update interrupt numbers as per manual.
>
> No. Unfortunately they are not that compatible. The A31 does not have
> the RTC clock output. So everyone got it wrong. :( Plus the clock rate
> of the internal RC oscillator varies between SoCs. I'm working on a
> series of patches to correct this. Stay tuned.
4 bit, EXT_LOSC_EN of LOSC_CTRL_REG (0x00) seem available in H6. I can
see external clock working with WIFI for A31 compatible.
WARNING: multiple messages have this Message-ID (diff)
From: jagan@amarulasolutions.com (Jagan Teki)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/7] arm64: allwinner: h6: Add RTC node
Date: Thu, 1 Nov 2018 13:03:43 +0530 [thread overview]
Message-ID: <CAMty3ZAW5KndyJj81obK49MKczdbk4SoUncmiiE_OhH1g7qFUA@mail.gmail.com> (raw)
In-Reply-To: <CAGb2v64fnpCh_rCy-9m8xgXmAZQGab1==f7cr332QfgueyuRNw@mail.gmail.com>
On Thu, Nov 1, 2018 at 8:25 AM Chen-Yu Tsai <wens@csie.org> wrote:
>
> On Thu, Nov 1, 2018 at 2:37 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
> >
> > From: Jagan Teki <jagan@openedev.com>
> >
> > RTC controller is similar to A31, so use the same compatible
> > for H6 and update interrupt numbers as per manual.
>
> No. Unfortunately they are not that compatible. The A31 does not have
> the RTC clock output. So everyone got it wrong. :( Plus the clock rate
> of the internal RC oscillator varies between SoCs. I'm working on a
> series of patches to correct this. Stay tuned.
4 bit, EXT_LOSC_EN of LOSC_CTRL_REG (0x00) seem available in H6. I can
see external clock working with WIFI for A31 compatible.
next prev parent reply other threads:[~2018-11-01 7:33 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-31 18:36 [PATCH 1/7] clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-10-31 18:36 ` [PATCH 2/7] arm64: allwinner: h6: Add common orangepi nodes into dtsi Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-11-01 2:53 ` Chen-Yu Tsai
2018-11-01 2:53 ` Chen-Yu Tsai
2018-11-01 2:53 ` Chen-Yu Tsai
2018-11-01 7:13 ` Jagan Teki
2018-11-01 7:13 ` Jagan Teki
2018-11-01 7:13 ` Jagan Teki
2018-11-01 7:20 ` Chen-Yu Tsai
2018-11-01 7:20 ` Chen-Yu Tsai
2018-11-01 7:20 ` Chen-Yu Tsai
2018-10-31 18:36 ` [PATCH 3/7] arm64: allwinner: h6: Add OrangePi Lite2 initial support Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-10-31 18:36 ` [PATCH 4/7] arm64: allwinner: h6: Add MMC1 pinmux Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-10-31 18:36 ` [PATCH 5/7] arm64: allwinner: h6: Add RTC node Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-11-01 2:55 ` Chen-Yu Tsai
2018-11-01 2:55 ` Chen-Yu Tsai
2018-11-01 2:55 ` Chen-Yu Tsai
2018-11-01 7:33 ` Jagan Teki [this message]
2018-11-01 7:33 ` Jagan Teki
2018-11-01 7:33 ` Jagan Teki
2018-11-01 7:53 ` Chen-Yu Tsai
2018-11-01 7:53 ` Chen-Yu Tsai
2018-11-01 7:53 ` Chen-Yu Tsai
2018-11-01 9:02 ` Jagan Teki
2018-11-01 9:02 ` Jagan Teki
2018-11-01 9:02 ` Jagan Teki
2018-11-01 9:35 ` Chen-Yu Tsai
2018-11-01 9:35 ` Chen-Yu Tsai
2018-11-01 9:35 ` Chen-Yu Tsai
2018-10-31 18:36 ` [PATCH 6/7] arm64: allwinner: h6: Add RTC clock to phandle 32kHz external oscillator Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-11-01 2:57 ` Chen-Yu Tsai
2018-11-01 2:57 ` Chen-Yu Tsai
2018-11-01 2:57 ` Chen-Yu Tsai
2018-10-31 18:36 ` [RFC PATCH 7/7] arm64: allwinner: h6: orangepi-liet2: Enable AP6356S WiFi support Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-11-01 7:35 ` Jagan Teki
2018-11-01 7:35 ` Jagan Teki
2018-11-01 7:35 ` Jagan Teki
2018-11-01 7:58 ` Chen-Yu Tsai
2018-11-01 7:58 ` Chen-Yu Tsai
2018-11-01 7:58 ` Chen-Yu Tsai
2018-11-01 9:08 ` Jagan Teki
2018-11-01 9:08 ` Jagan Teki
2018-11-01 9:08 ` Jagan Teki
2018-11-01 9:49 ` Chen-Yu Tsai
2018-11-01 9:49 ` Chen-Yu Tsai
2018-11-01 9:49 ` Chen-Yu Tsai
2018-11-05 8:41 ` [PATCH 1/7] clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width Maxime Ripard
2018-11-05 8:41 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAMty3ZAW5KndyJj81obK49MKczdbk4SoUncmiiE_OhH1g7qFUA@mail.gmail.com \
--to=jagan@amarulasolutions.com \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=jagan@openedev.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@bootlin.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.