All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [CI v13 03/17] drm/i915/dp: Do not enable PSR2 if DSC is enabled
Date: Wed, 28 Nov 2018 12:26:14 -0800	[thread overview]
Message-ID: <20181128202628.20238-3-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181128202628.20238-1-manasi.d.navare@intel.com>

If a eDP panel supports both PSR2 and VDSC, our HW cannot
support both at a time. Give priority to PSR2 if a requested
resolution can be supported without compression else enable
VDSC and keep PSR2 disabled.

v4:
Fix the unrealted stuff removed during rebase (Ville)
v3:
* Rebase
v2:
* Add warning for DSC and PSR2 enabled together (DK)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
---
 drivers/gpu/drm/i915/intel_psr.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index 572e626eadff..2084784f320d 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -75,6 +75,10 @@ static bool intel_psr2_enabled(struct drm_i915_private *dev_priv,
 	if (i915_modparams.enable_psr == -1)
 		return false;
 
+	/* Cannot enable DSC and PSR2 simultaneously */
+	WARN_ON(crtc_state->dsc_params.compression_enable &&
+		crtc_state->has_psr2);
+
 	switch (dev_priv->psr.debug & I915_PSR_DEBUG_MODE_MASK) {
 	case I915_PSR_DEBUG_FORCE_PSR1:
 		return false;
@@ -502,6 +506,16 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
 	if (!dev_priv->psr.sink_psr2_support)
 		return false;
 
+	/*
+	 * DSC and PSR2 cannot be enabled simultaneously. If a requested
+	 * resolution requires DSC to be enabled, priority is given to DSC
+	 * over PSR2.
+	 */
+	if (crtc_state->dsc_params.compression_enable) {
+		DRM_DEBUG_KMS("PSR2 cannot be enabled since DSC is enabled\n");
+		return false;
+	}
+
 	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
 		psr_max_h = 4096;
 		psr_max_v = 2304;
-- 
2.19.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2018-11-28 20:23 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-28 20:26 [CI v13 01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-11-28 20:26 ` [CI v13 02/17] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-11-28 21:36   ` [PATCH v14 " Manasi Navare
2018-11-28 20:26 ` Manasi Navare [this message]
2018-11-28 20:26 ` [CI v13 04/17] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-11-29 19:38   ` [CI v15 " Manasi Navare
2018-11-28 20:26 ` [CI v13 05/17] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-11-28 20:26 ` [CI v13 06/17] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-11-28 20:26 ` [CI v13 07/17] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-11-28 20:26 ` [CI v13 08/17] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-11-28 20:26 ` [CI v13 09/17] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-11-28 20:26 ` [CI v13 10/17] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-11-28 20:26 ` [CI v13 11/17] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-11-28 20:26 ` [CI v13 12/17] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-11-28 20:26 ` [CI v13 13/17] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-11-28 20:26 ` [CI v13 14/17] i915/dp/fec: Add fec_enable to the crtc state Manasi Navare
2018-11-28 20:26 ` [CI v13 15/17] drm/i915/fec: Set FEC_READY in FEC_CONFIGURATION Manasi Navare
2018-11-28 20:26 ` [CI v13 16/17] i915/dp/fec: Configure the Forward Error Correction bits Manasi Navare
2018-11-28 20:26 ` [CI v13 17/17] drm/i915/fec: Disable FEC state Manasi Navare
2018-11-28 21:01 ` ✗ Fi.CI.BAT: failure for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Patchwork
2018-11-28 22:59 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state (rev2) Patchwork
2018-11-28 23:06 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-28 23:15 ` ✓ Fi.CI.BAT: success " Patchwork
2018-11-29 10:29 ` ✓ Fi.CI.IGT: " Patchwork
2018-11-29 19:50 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state (rev3) Patchwork
2018-11-29 19:56 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-29 20:08 ` ✓ Fi.CI.BAT: success " Patchwork
2018-11-29 20:52 ` [CI v13 01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-11-30 12:52 ` ✗ Fi.CI.IGT: failure for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state (rev3) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181128202628.20238-3-manasi.d.navare@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.