From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [CI v15 04/17] drm/i915/dsc: Define & Compute VESA DSC params
Date: Thu, 29 Nov 2018 11:38:27 -0800 [thread overview]
Message-ID: <20181129193827.7914-1-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181128202628.20238-4-manasi.d.navare@intel.com>
From: Gaurav K Singh <gaurav.k.singh@intel.com>
This patches does the following:
1. This patch defines all the DSC parameters as per the VESA
DSC specification. These are stored in the encoder and used
to compute the PPS parameters to be sent to the Sink.
2. Compute all the DSC parameters which are derived from DSC
state of intel_crtc_state.
3. Compute all parameters that are VESA DSC specific
This computation happens in the atomic check phase during
compute_config() to validate if display stream compression
can be enabled for the requested mode.
v8 (From Manasi):
* DEBUG_KMS instead of DRM_ERROR for user triggerable
errors (Ville)
v7: (From Manasi)
* Dont use signed int for rc_range_params (Manasi)
* Mask the range_bpg_offset to use only 6 bits
* Add SPDX identifier (Chris Wilson)
v6 (From Manasi):
* Add a check for line_buf_depth return value (Anusha)
* Remove DRM DSC constants to different patch (Manasi)
v5 (From Manasi):
* Add logic to limit the max line buf depth for DSC 1.1 to 13
as per DSC 1.1 spec
* Fix dim checkpatch warnings/checks
v4 (From Gaurav):
* Rebase on latest drm tip
* rename variable name(Manasi)
* Populate linebuf_depth variable(Manasi)
v3 (From Gaurav):
* Rebase my previous patches on top of Manasi's latest patch
series
* Using >>n rather than /2^n (Manasi)
* Change the commit message to explain what the patch is doing(Gaurav)
Fixed review comments from Ville:
* Don't use macro TWOS_COMPLEMENT
* Mention in comment about the source of RC params
* Return directly from case statements
* Using single asssignment for assigning rc_range_params
* Using <<n rather than *2^n and removing the comments
about the fixed point numbers
v2 (From Manasi):
* Update logic for minor version to consider the dpcd value
and what supported by the HW platform
* Use DRM DSC config struct instead of intel_dp struct
* Move the DSC constants to DRM DSC header file
* Use u16, u8 where bigger data types not needed
* * Compute the DSC parameters as part of DSC compute config
since the computation can fail (Manasi)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Co-developed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
---
drivers/gpu/drm/i915/Makefile | 3 +-
drivers/gpu/drm/i915/intel_dp.c | 7 +
drivers/gpu/drm/i915/intel_drv.h | 4 +
drivers/gpu/drm/i915/intel_vdsc.c | 456 ++++++++++++++++++++++++++++++
4 files changed, 469 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/i915/intel_vdsc.c
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 0ff878c994e2..8370b9de6e4f 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -157,7 +157,8 @@ i915-y += dvo_ch7017.o \
intel_sdvo.o \
intel_tv.o \
vlv_dsi.o \
- vlv_dsi_pll.o
+ vlv_dsi_pll.o \
+ intel_vdsc.o
# Post-mortem debug and GPU hang state capture
i915-$(CONFIG_DRM_I915_CAPTURE_ERROR) += i915_gpu_error.o
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index a2780733768a..3b612eb134e7 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1953,6 +1953,13 @@ static bool intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
return false;
}
}
+ if (intel_dp_compute_dsc_params(intel_dp, pipe_config) < 0) {
+ DRM_DEBUG_KMS("Cannot compute valid DSC parameters for Input Bpp = %d "
+ "Compressed BPP = %d\n",
+ pipe_config->pipe_bpp,
+ pipe_config->dsc_params.compressed_bpp);
+ return false;
+ }
pipe_config->dsc_params.compression_enable = true;
DRM_DEBUG_KMS("DP DSC computed with Input Bpp = %d "
"Compressed Bpp = %d Slice Count = %d\n",
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 5577f0f31b99..44a5b21799f5 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1857,6 +1857,10 @@ uint16_t intel_dp_dsc_get_output_bpp(int link_clock, uint8_t lane_count,
uint8_t intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp, int mode_clock,
int mode_hdisplay);
+/* intel_vdsc.c */
+int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
+ struct intel_crtc_state *pipe_config);
+
static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
{
return ~((1 << lane_count) - 1) & 0xf;
diff --git a/drivers/gpu/drm/i915/intel_vdsc.c b/drivers/gpu/drm/i915/intel_vdsc.c
new file mode 100644
index 000000000000..5e0f9ac5667b
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_vdsc.c
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2018 Intel Corporation
+ *
+ * Author: Gaurav K Singh <gaurav.k.singh@intel.com>
+ * Manasi Navare <manasi.d.navare@intel.com>
+ */
+
+#include <drm/drmP.h>
+#include <drm/i915_drm.h>
+#include "i915_drv.h"
+#include "intel_drv.h"
+
+enum ROW_INDEX_BPP {
+ ROW_INDEX_6BPP = 0,
+ ROW_INDEX_8BPP,
+ ROW_INDEX_10BPP,
+ ROW_INDEX_12BPP,
+ ROW_INDEX_15BPP,
+ MAX_ROW_INDEX
+};
+
+enum COLUMN_INDEX_BPC {
+ COLUMN_INDEX_8BPC = 0,
+ COLUMN_INDEX_10BPC,
+ COLUMN_INDEX_12BPC,
+ COLUMN_INDEX_14BPC,
+ COLUMN_INDEX_16BPC,
+ MAX_COLUMN_INDEX
+};
+
+#define DSC_SUPPORTED_VERSION_MIN 1
+
+/* From DSC_v1.11 spec, rc_parameter_Set syntax element typically constant */
+static u16 rc_buf_thresh[] = {
+ 896, 1792, 2688, 3584, 4480, 5376, 6272, 6720, 7168, 7616,
+ 7744, 7872, 8000, 8064
+};
+
+struct rc_parameters {
+ u16 initial_xmit_delay;
+ u8 first_line_bpg_offset;
+ u16 initial_offset;
+ u8 flatness_min_qp;
+ u8 flatness_max_qp;
+ u8 rc_quant_incr_limit0;
+ u8 rc_quant_incr_limit1;
+ struct drm_dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES];
+};
+
+/*
+ * Selected Rate Control Related Parameter Recommended Values
+ * from DSC_v1.11 spec & C Model release: DSC_model_20161212
+ */
+static struct rc_parameters rc_params[][MAX_COLUMN_INDEX] = {
+{
+ /* 6BPP/8BPC */
+ { 768, 15, 6144, 3, 13, 11, 11, {
+ { 0, 4, 0 }, { 1, 6, -2 }, { 3, 8, -2 }, { 4, 8, -4 },
+ { 5, 9, -6 }, { 5, 9, -6 }, { 6, 9, -6 }, { 6, 10, -8 },
+ { 7, 11, -8 }, { 8, 12, -10 }, { 9, 12, -10 }, { 10, 12, -12 },
+ { 10, 12, -12 }, { 11, 12, -12 }, { 13, 14, -12 }
+ }
+ },
+ /* 6BPP/10BPC */
+ { 768, 15, 6144, 7, 17, 15, 15, {
+ { 0, 8, 0 }, { 3, 10, -2 }, { 7, 12, -2 }, { 8, 12, -4 },
+ { 9, 13, -6 }, { 9, 13, -6 }, { 10, 13, -6 }, { 10, 14, -8 },
+ { 11, 15, -8 }, { 12, 16, -10 }, { 13, 16, -10 },
+ { 14, 16, -12 }, { 14, 16, -12 }, { 15, 16, -12 },
+ { 17, 18, -12 }
+ }
+ },
+ /* 6BPP/12BPC */
+ { 768, 15, 6144, 11, 21, 19, 19, {
+ { 0, 12, 0 }, { 5, 14, -2 }, { 11, 16, -2 }, { 12, 16, -4 },
+ { 13, 17, -6 }, { 13, 17, -6 }, { 14, 17, -6 }, { 14, 18, -8 },
+ { 15, 19, -8 }, { 16, 20, -10 }, { 17, 20, -10 },
+ { 18, 20, -12 }, { 18, 20, -12 }, { 19, 20, -12 },
+ { 21, 22, -12 }
+ }
+ },
+ /* 6BPP/14BPC */
+ { 768, 15, 6144, 15, 25, 23, 27, {
+ { 0, 16, 0 }, { 7, 18, -2 }, { 15, 20, -2 }, { 16, 20, -4 },
+ { 17, 21, -6 }, { 17, 21, -6 }, { 18, 21, -6 }, { 18, 22, -8 },
+ { 19, 23, -8 }, { 20, 24, -10 }, { 21, 24, -10 },
+ { 22, 24, -12 }, { 22, 24, -12 }, { 23, 24, -12 },
+ { 25, 26, -12 }
+ }
+ },
+ /* 6BPP/16BPC */
+ { 768, 15, 6144, 19, 29, 27, 27, {
+ { 0, 20, 0 }, { 9, 22, -2 }, { 19, 24, -2 }, { 20, 24, -4 },
+ { 21, 25, -6 }, { 21, 25, -6 }, { 22, 25, -6 }, { 22, 26, -8 },
+ { 23, 27, -8 }, { 24, 28, -10 }, { 25, 28, -10 },
+ { 26, 28, -12 }, { 26, 28, -12 }, { 27, 28, -12 },
+ { 29, 30, -12 }
+ }
+ },
+},
+{
+ /* 8BPP/8BPC */
+ { 512, 12, 6144, 3, 12, 11, 11, {
+ { 0, 4, 2 }, { 0, 4, 0 }, { 1, 5, 0 }, { 1, 6, -2 },
+ { 3, 7, -4 }, { 3, 7, -6 }, { 3, 7, -8 }, { 3, 8, -8 },
+ { 3, 9, -8 }, { 3, 10, -10 }, { 5, 11, -10 }, { 5, 12, -12 },
+ { 5, 13, -12 }, { 7, 13, -12 }, { 13, 15, -12 }
+ }
+ },
+ /* 8BPP/10BPC */
+ { 512, 12, 6144, 7, 16, 15, 15, {
+ { 0, 4, 2 }, { 4, 8, 0 }, { 5, 9, 0 }, { 5, 10, -2 },
+ { 7, 11, -4 }, { 7, 11, -6 }, { 7, 11, -8 }, { 7, 12, -8 },
+ { 7, 13, -8 }, { 7, 14, -10 }, { 9, 15, -10 }, { 9, 16, -12 },
+ { 9, 17, -12 }, { 11, 17, -12 }, { 17, 19, -12 }
+ }
+ },
+ /* 8BPP/12BPC */
+ { 512, 12, 6144, 11, 20, 19, 19, {
+ { 0, 12, 2 }, { 4, 12, 0 }, { 9, 13, 0 }, { 9, 14, -2 },
+ { 11, 15, -4 }, { 11, 15, -6 }, { 11, 15, -8 }, { 11, 16, -8 },
+ { 11, 17, -8 }, { 11, 18, -10 }, { 13, 19, -10 },
+ { 13, 20, -12 }, { 13, 21, -12 }, { 15, 21, -12 },
+ { 21, 23, -12 }
+ }
+ },
+ /* 8BPP/14BPC */
+ { 512, 12, 6144, 15, 24, 23, 23, {
+ { 0, 12, 0 }, { 5, 13, 0 }, { 11, 15, 0 }, { 12, 17, -2 },
+ { 15, 19, -4 }, { 15, 19, -6 }, { 15, 19, -8 }, { 15, 20, -8 },
+ { 15, 21, -8 }, { 15, 22, -10 }, { 17, 22, -10 },
+ { 17, 23, -12 }, { 17, 23, -12 }, { 21, 24, -12 },
+ { 24, 25, -12 }
+ }
+ },
+ /* 8BPP/16BPC */
+ { 512, 12, 6144, 19, 28, 27, 27, {
+ { 0, 12, 2 }, { 6, 14, 0 }, { 13, 17, 0 }, { 15, 20, -2 },
+ { 19, 23, -4 }, { 19, 23, -6 }, { 19, 23, -8 }, { 19, 24, -8 },
+ { 19, 25, -8 }, { 19, 26, -10 }, { 21, 26, -10 },
+ { 21, 27, -12 }, { 21, 27, -12 }, { 25, 28, -12 },
+ { 28, 29, -12 }
+ }
+ },
+},
+{
+ /* 10BPP/8BPC */
+ { 410, 15, 5632, 3, 12, 11, 11, {
+ { 0, 3, 2 }, { 0, 4, 0 }, { 1, 5, 0 }, { 2, 6, -2 },
+ { 3, 7, -4 }, { 3, 7, -6 }, { 3, 7, -8 }, { 3, 8, -8 },
+ { 3, 9, -8 }, { 3, 9, -10 }, { 5, 10, -10 }, { 5, 10, -10 },
+ { 5, 11, -12 }, { 7, 11, -12 }, { 11, 12, -12 }
+ }
+ },
+ /* 10BPP/10BPC */
+ { 410, 15, 5632, 7, 16, 15, 15, {
+ { 0, 7, 2 }, { 4, 8, 0 }, { 5, 9, 0 }, { 6, 10, -2 },
+ { 7, 11, -4 }, { 7, 11, -6 }, { 7, 11, -8 }, { 7, 12, -8 },
+ { 7, 13, -8 }, { 7, 13, -10 }, { 9, 14, -10 }, { 9, 14, -10 },
+ { 9, 15, -12 }, { 11, 15, -12 }, { 15, 16, -12 }
+ }
+ },
+ /* 10BPP/12BPC */
+ { 410, 15, 5632, 11, 20, 19, 19, {
+ { 0, 11, 2 }, { 4, 12, 0 }, { 9, 13, 0 }, { 10, 14, -2 },
+ { 11, 15, -4 }, { 11, 15, -6 }, { 11, 15, -8 }, { 11, 16, -8 },
+ { 11, 17, -8 }, { 11, 17, -10 }, { 13, 18, -10 },
+ { 13, 18, -10 }, { 13, 19, -12 }, { 15, 19, -12 },
+ { 19, 20, -12 }
+ }
+ },
+ /* 10BPP/14BPC */
+ { 410, 15, 5632, 15, 24, 23, 23, {
+ { 0, 11, 2 }, { 5, 13, 0 }, { 11, 15, 0 }, { 13, 18, -2 },
+ { 15, 19, -4 }, { 15, 19, -6 }, { 15, 19, -8 }, { 15, 20, -8 },
+ { 15, 21, -8 }, { 15, 21, -10 }, { 17, 22, -10 },
+ { 17, 22, -10 }, { 17, 23, -12 }, { 19, 23, -12 },
+ { 23, 24, -12 }
+ }
+ },
+ /* 10BPP/16BPC */
+ { 410, 15, 5632, 19, 28, 27, 27, {
+ { 0, 11, 2 }, { 6, 14, 0 }, { 13, 17, 0 }, { 16, 20, -2 },
+ { 19, 23, -4 }, { 19, 23, -6 }, { 19, 23, -8 }, { 19, 24, -8 },
+ { 19, 25, -8 }, { 19, 25, -10 }, { 21, 26, -10 },
+ { 21, 26, -10 }, { 21, 27, -12 }, { 23, 27, -12 },
+ { 27, 28, -12 }
+ }
+ },
+},
+{
+ /* 12BPP/8BPC */
+ { 341, 15, 2048, 3, 12, 11, 11, {
+ { 0, 2, 2 }, { 0, 4, 0 }, { 1, 5, 0 }, { 1, 6, -2 },
+ { 3, 7, -4 }, { 3, 7, -6 }, { 3, 7, -8 }, { 3, 8, -8 },
+ { 3, 9, -8 }, { 3, 10, -10 }, { 5, 11, -10 },
+ { 5, 12, -12 }, { 5, 13, -12 }, { 7, 13, -12 }, { 13, 15, -12 }
+ }
+ },
+ /* 12BPP/10BPC */
+ { 341, 15, 2048, 7, 16, 15, 15, {
+ { 0, 2, 2 }, { 2, 5, 0 }, { 3, 7, 0 }, { 4, 8, -2 },
+ { 6, 9, -4 }, { 7, 10, -6 }, { 7, 11, -8 }, { 7, 12, -8 },
+ { 7, 13, -8 }, { 7, 14, -10 }, { 9, 15, -10 }, { 9, 16, -12 },
+ { 9, 17, -12 }, { 11, 17, -12 }, { 17, 19, -12 }
+ }
+ },
+ /* 12BPP/12BPC */
+ { 341, 15, 2048, 11, 20, 19, 19, {
+ { 0, 6, 2 }, { 4, 9, 0 }, { 7, 11, 0 }, { 8, 12, -2 },
+ { 10, 13, -4 }, { 11, 14, -6 }, { 11, 15, -8 }, { 11, 16, -8 },
+ { 11, 17, -8 }, { 11, 18, -10 }, { 13, 19, -10 },
+ { 13, 20, -12 }, { 13, 21, -12 }, { 15, 21, -12 },
+ { 21, 23, -12 }
+ }
+ },
+ /* 12BPP/14BPC */
+ { 341, 15, 2048, 15, 24, 23, 23, {
+ { 0, 6, 2 }, { 7, 10, 0 }, { 9, 13, 0 }, { 11, 16, -2 },
+ { 14, 17, -4 }, { 15, 18, -6 }, { 15, 19, -8 }, { 15, 20, -8 },
+ { 15, 20, -8 }, { 15, 21, -10 }, { 17, 21, -10 },
+ { 17, 21, -12 }, { 17, 21, -12 }, { 19, 22, -12 },
+ { 22, 23, -12 }
+ }
+ },
+ /* 12BPP/16BPC */
+ { 341, 15, 2048, 19, 28, 27, 27, {
+ { 0, 6, 2 }, { 6, 11, 0 }, { 11, 15, 0 }, { 14, 18, -2 },
+ { 18, 21, -4 }, { 19, 22, -6 }, { 19, 23, -8 }, { 19, 24, -8 },
+ { 19, 24, -8 }, { 19, 25, -10 }, { 21, 25, -10 },
+ { 21, 25, -12 }, { 21, 25, -12 }, { 23, 26, -12 },
+ { 26, 27, -12 }
+ }
+ },
+},
+{
+ /* 15BPP/8BPC */
+ { 273, 15, 2048, 3, 12, 11, 11, {
+ { 0, 0, 10 }, { 0, 1, 8 }, { 0, 1, 6 }, { 0, 2, 4 },
+ { 1, 2, 2 }, { 1, 3, 0 }, { 1, 3, -2 }, { 2, 4, -4 },
+ { 2, 5, -6 }, { 3, 5, -8 }, { 4, 6, -10 }, { 4, 7, -10 },
+ { 5, 7, -12 }, { 7, 8, -12 }, { 8, 9, -12 }
+ }
+ },
+ /* 15BPP/10BPC */
+ { 273, 15, 2048, 7, 16, 15, 15, {
+ { 0, 2, 10 }, { 2, 5, 8 }, { 3, 5, 6 }, { 4, 6, 4 },
+ { 5, 6, 2 }, { 5, 7, 0 }, { 5, 7, -2 }, { 6, 8, -4 },
+ { 6, 9, -6 }, { 7, 9, -8 }, { 8, 10, -10 }, { 8, 11, -10 },
+ { 9, 11, -12 }, { 11, 12, -12 }, { 12, 13, -12 }
+ }
+ },
+ /* 15BPP/12BPC */
+ { 273, 15, 2048, 11, 20, 19, 19, {
+ { 0, 4, 10 }, { 2, 7, 8 }, { 4, 9, 6 }, { 6, 11, 4 },
+ { 9, 11, 2 }, { 9, 11, 0 }, { 9, 12, -2 }, { 10, 12, -4 },
+ { 11, 13, -6 }, { 11, 13, -8 }, { 12, 14, -10 },
+ { 13, 15, -10 }, { 13, 15, -12 }, { 15, 16, -12 },
+ { 16, 17, -12 }
+ }
+ },
+ /* 15BPP/14BPC */
+ { 273, 15, 2048, 15, 24, 23, 23, {
+ { 0, 4, 10 }, { 3, 8, 8 }, { 6, 11, 6 }, { 9, 14, 4 },
+ { 13, 15, 2 }, { 13, 15, 0 }, { 13, 16, -2 }, { 14, 16, -4 },
+ { 15, 17, -6 }, { 15, 17, -8 }, { 16, 18, -10 },
+ { 17, 19, -10 }, { 17, 19, -12 }, { 19, 20, -12 },
+ { 20, 21, -12 }
+ }
+ },
+ /* 15BPP/16BPC */
+ { 273, 15, 2048, 19, 28, 27, 27, {
+ { 0, 4, 10 }, { 4, 9, 8 }, { 8, 13, 6 }, { 12, 17, 4 },
+ { 17, 19, 2 }, { 17, 20, 0 }, { 17, 20, -2 }, { 18, 20, -4 },
+ { 19, 21, -6 }, { 19, 21, -8 }, { 20, 22, -10 },
+ { 21, 23, -10 }, { 21, 23, -12 }, { 23, 24, -12 },
+ { 24, 25, -12 }
+ }
+ }
+}
+
+};
+
+static int get_row_index_for_rc_params(u16 compressed_bpp)
+{
+ switch (compressed_bpp) {
+ case 6:
+ return ROW_INDEX_6BPP;
+ case 8:
+ return ROW_INDEX_8BPP;
+ case 10:
+ return ROW_INDEX_10BPP;
+ case 12:
+ return ROW_INDEX_12BPP;
+ case 15:
+ return ROW_INDEX_15BPP;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int get_column_index_for_rc_params(u8 bits_per_component)
+{
+ switch (bits_per_component) {
+ case 8:
+ return COLUMN_INDEX_8BPC;
+ case 10:
+ return COLUMN_INDEX_10BPC;
+ case 12:
+ return COLUMN_INDEX_12BPC;
+ case 14:
+ return COLUMN_INDEX_14BPC;
+ case 16:
+ return COLUMN_INDEX_16BPC;
+ default:
+ return -EINVAL;
+ }
+}
+
+int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
+ struct intel_crtc_state *pipe_config)
+{
+ struct drm_dsc_config *vdsc_cfg = &pipe_config->dp_dsc_cfg;
+ u16 compressed_bpp = pipe_config->dsc_params.compressed_bpp;
+ u8 i = 0;
+ int row_index = 0;
+ int column_index = 0;
+ u8 line_buf_depth = 0;
+
+ vdsc_cfg->pic_width = pipe_config->base.adjusted_mode.crtc_hdisplay;
+ vdsc_cfg->pic_height = pipe_config->base.adjusted_mode.crtc_vdisplay;
+ vdsc_cfg->slice_width = DIV_ROUND_UP(vdsc_cfg->pic_width,
+ pipe_config->dsc_params.slice_count);
+ /*
+ * Slice Height of 8 works for all currently available panels. So start
+ * with that if pic_height is an integral multiple of 8.
+ * Eventually add logic to try multiple slice heights.
+ */
+ if (vdsc_cfg->pic_height % 8 == 0)
+ vdsc_cfg->slice_height = 8;
+ else if (vdsc_cfg->pic_height % 4 == 0)
+ vdsc_cfg->slice_height = 4;
+ else
+ vdsc_cfg->slice_height = 2;
+
+ /* Values filled from DSC Sink DPCD */
+ vdsc_cfg->dsc_version_major =
+ (intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] &
+ DP_DSC_MAJOR_MASK) >> DP_DSC_MAJOR_SHIFT;
+ vdsc_cfg->dsc_version_minor =
+ min(DSC_SUPPORTED_VERSION_MIN,
+ (intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] &
+ DP_DSC_MINOR_MASK) >> DP_DSC_MINOR_SHIFT);
+
+ vdsc_cfg->convert_rgb = intel_dp->dsc_dpcd[DP_DSC_DEC_COLOR_FORMAT_CAP - DP_DSC_SUPPORT] &
+ DP_DSC_RGB;
+
+ line_buf_depth = drm_dp_dsc_sink_line_buf_depth(intel_dp->dsc_dpcd);
+ if (!line_buf_depth) {
+ DRM_DEBUG_KMS("DSC Sink Line Buffer Depth invalid\n");
+ return -EINVAL;
+ }
+ if (vdsc_cfg->dsc_version_minor == 2)
+ vdsc_cfg->line_buf_depth = (line_buf_depth == DSC_1_2_MAX_LINEBUF_DEPTH_BITS) ?
+ DSC_1_2_MAX_LINEBUF_DEPTH_VAL : line_buf_depth;
+ else
+ vdsc_cfg->line_buf_depth = (line_buf_depth > DSC_1_1_MAX_LINEBUF_DEPTH_BITS) ?
+ DSC_1_1_MAX_LINEBUF_DEPTH_BITS : line_buf_depth;
+
+ /* Gen 11 does not support YCbCr */
+ vdsc_cfg->enable422 = false;
+ /* Gen 11 does not support VBR */
+ vdsc_cfg->vbr_enable = false;
+ vdsc_cfg->block_pred_enable =
+ intel_dp->dsc_dpcd[DP_DSC_BLK_PREDICTION_SUPPORT - DP_DSC_SUPPORT] &
+ DP_DSC_BLK_PREDICTION_IS_SUPPORTED;
+
+ /* Gen 11 only supports integral values of bpp */
+ vdsc_cfg->bits_per_pixel = compressed_bpp << 4;
+ vdsc_cfg->bits_per_component = pipe_config->pipe_bpp / 3;
+
+ for (i = 0; i < DSC_NUM_BUF_RANGES - 1; i++) {
+ /*
+ * six 0s are appended to the lsb of each threshold value
+ * internally in h/w.
+ * Only 8 bits are allowed for programming RcBufThreshold
+ */
+ vdsc_cfg->rc_buf_thresh[i] = rc_buf_thresh[i] >> 6;
+ }
+
+ /*
+ * For 6bpp, RC Buffer threshold 12 and 13 need a different value
+ * as per C Model
+ */
+ if (compressed_bpp == 6) {
+ vdsc_cfg->rc_buf_thresh[12] = 0x7C;
+ vdsc_cfg->rc_buf_thresh[13] = 0x7D;
+ }
+
+ row_index = get_row_index_for_rc_params(compressed_bpp);
+ column_index =
+ get_column_index_for_rc_params(vdsc_cfg->bits_per_component);
+
+ if (row_index < 0 || column_index < 0)
+ return -EINVAL;
+
+ vdsc_cfg->first_line_bpg_offset =
+ rc_params[row_index][column_index].first_line_bpg_offset;
+ vdsc_cfg->initial_xmit_delay =
+ rc_params[row_index][column_index].initial_xmit_delay;
+ vdsc_cfg->initial_offset =
+ rc_params[row_index][column_index].initial_offset;
+ vdsc_cfg->flatness_min_qp =
+ rc_params[row_index][column_index].flatness_min_qp;
+ vdsc_cfg->flatness_max_qp =
+ rc_params[row_index][column_index].flatness_max_qp;
+ vdsc_cfg->rc_quant_incr_limit0 =
+ rc_params[row_index][column_index].rc_quant_incr_limit0;
+ vdsc_cfg->rc_quant_incr_limit1 =
+ rc_params[row_index][column_index].rc_quant_incr_limit1;
+
+ for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
+ vdsc_cfg->rc_range_params[i].range_min_qp =
+ rc_params[row_index][column_index].rc_range_params[i].range_min_qp;
+ vdsc_cfg->rc_range_params[i].range_max_qp =
+ rc_params[row_index][column_index].rc_range_params[i].range_max_qp;
+ /*
+ * Range BPG Offset uses 2's complement and is only a 6 bits. So
+ * mask it to get only 6 bits.
+ */
+ vdsc_cfg->rc_range_params[i].range_bpg_offset =
+ rc_params[row_index][column_index].rc_range_params[i].range_bpg_offset &
+ DSC_RANGE_BPG_OFFSET_MASK;
+ }
+
+ /*
+ * BitsPerComponent value determines mux_word_size:
+ * When BitsPerComponent is 12bpc, muxWordSize will be equal to 64 bits
+ * When BitsPerComponent is 8 or 10bpc, muxWordSize will be equal to
+ * 48 bits
+ */
+ if (vdsc_cfg->bits_per_component == 8 ||
+ vdsc_cfg->bits_per_component == 10)
+ vdsc_cfg->mux_word_size = DSC_MUX_WORD_SIZE_8_10_BPC;
+ else if (vdsc_cfg->bits_per_component == 12)
+ vdsc_cfg->mux_word_size = DSC_MUX_WORD_SIZE_12_BPC;
+
+ /* RC_MODEL_SIZE is a constant across all configurations */
+ vdsc_cfg->rc_model_size = DSC_RC_MODEL_SIZE_CONST;
+ /* InitialScaleValue is a 6 bit value with 3 fractional bits (U3.3) */
+ vdsc_cfg->initial_scale_value = (vdsc_cfg->rc_model_size << 3) /
+ (vdsc_cfg->rc_model_size - vdsc_cfg->initial_offset);
+
+ return 0;
+}
--
2.19.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-11-29 19:35 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-28 20:26 [CI v13 01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-11-28 20:26 ` [CI v13 02/17] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-11-28 21:36 ` [PATCH v14 " Manasi Navare
2018-11-28 20:26 ` [CI v13 03/17] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-11-28 20:26 ` [CI v13 04/17] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-11-29 19:38 ` Manasi Navare [this message]
2018-11-28 20:26 ` [CI v13 05/17] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-11-28 20:26 ` [CI v13 06/17] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-11-28 20:26 ` [CI v13 07/17] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-11-28 20:26 ` [CI v13 08/17] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-11-28 20:26 ` [CI v13 09/17] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-11-28 20:26 ` [CI v13 10/17] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-11-28 20:26 ` [CI v13 11/17] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-11-28 20:26 ` [CI v13 12/17] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-11-28 20:26 ` [CI v13 13/17] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-11-28 20:26 ` [CI v13 14/17] i915/dp/fec: Add fec_enable to the crtc state Manasi Navare
2018-11-28 20:26 ` [CI v13 15/17] drm/i915/fec: Set FEC_READY in FEC_CONFIGURATION Manasi Navare
2018-11-28 20:26 ` [CI v13 16/17] i915/dp/fec: Configure the Forward Error Correction bits Manasi Navare
2018-11-28 20:26 ` [CI v13 17/17] drm/i915/fec: Disable FEC state Manasi Navare
2018-11-28 21:01 ` ✗ Fi.CI.BAT: failure for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Patchwork
2018-11-28 22:59 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state (rev2) Patchwork
2018-11-28 23:06 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-28 23:15 ` ✓ Fi.CI.BAT: success " Patchwork
2018-11-29 10:29 ` ✓ Fi.CI.IGT: " Patchwork
2018-11-29 19:50 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state (rev3) Patchwork
2018-11-29 19:56 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-29 20:08 ` ✓ Fi.CI.BAT: success " Patchwork
2018-11-29 20:52 ` [CI v13 01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-11-30 12:52 ` ✗ Fi.CI.IGT: failure for series starting with [CI,v13,01/17] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state (rev3) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181129193827.7914-1-manasi.d.navare@intel.com \
--to=manasi.d.navare@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.