All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: "Z.q. Hou" <zhiqiang.hou@nxp.com>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"l.subrahmanya@mobiveil.co.in" <l.subrahmanya@mobiveil.co.in>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	Leo Li <leoyang.li@nxp.com>,
	"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
	"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
	"will.deacon@arm.com" <will.deacon@arm.com>,
	Mingkai Hu <mingkai.hu@nxp.com>,
	"M.h. Lian" <minghuan.lian@nxp.com>,
	Xiaowei Bao <xiaowei.bao@nxp.com>
Subject: Re: [PATCHv4 24/28] PCI: mobiveil: add PCIe Gen4 RC driver for NXP Layerscape SoCs
Date: Mon, 11 Mar 2019 09:01:40 -0500	[thread overview]
Message-ID: <20190311140140.GA161843@google.com> (raw)
In-Reply-To: <20190311093130.7209-25-Zhiqiang.Hou@nxp.com>

On Mon, Mar 11, 2019 at 09:33:16AM +0000, Z.q. Hou wrote:
> From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> 
> This PCIe controller is based on the Mobiveil GPEX IP, which is
> compatible with the PCI Express™ Base Specification, Revision 4.0.
> 
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
> ---
> V4:
>  - no change
> 
>  drivers/pci/controller/mobiveil/Kconfig       |  10 +
>  drivers/pci/controller/mobiveil/Makefile      |   1 +
>  .../controller/mobiveil/pci-layerscape-gen4.c | 254 ++++++++++++++++++
>  .../pci/controller/mobiveil/pcie-mobiveil.h   |  16 +-
>  4 files changed, 279 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
> 
> diff --git a/drivers/pci/controller/mobiveil/Kconfig b/drivers/pci/controller/mobiveil/Kconfig
> index 64343c07bfed..3ddb7d6163a9 100644
> --- a/drivers/pci/controller/mobiveil/Kconfig
> +++ b/drivers/pci/controller/mobiveil/Kconfig
> @@ -21,4 +21,14 @@ config PCIE_MOBIVEIL_PLAT
>  	  Soft IP. It has up to 8 outbound and inbound windows
>  	  for address translation and it is a PCIe Gen4 IP.
>  
> +config PCI_LAYERSCAPE_GEN4
> +	bool "Freescale Layerscpe PCIe Gen4 controller"

"Layerscape"

> +	depends on PCI
> +	depends on OF && (ARM64 || ARCH_LAYERSCAPE)
> +	depends on PCI_MSI_IRQ_DOMAIN
> +	select PCIE_MOBIVEIL_HOST
> +	help
> +	  Say Y here if you want PCIe Gen4 controller support on
> +	  Layerscape SoCs. The PCIe controller can work in RC or
> +	  EP mode according to RCW[HOST_AGT_PEX] setting.
>  endmenu
> diff --git a/drivers/pci/controller/mobiveil/Makefile b/drivers/pci/controller/mobiveil/Makefile
> index 9fb6d1c6504d..ff66774ccac4 100644
> --- a/drivers/pci/controller/mobiveil/Makefile
> +++ b/drivers/pci/controller/mobiveil/Makefile
> @@ -2,3 +2,4 @@
>  obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
>  obj-$(CONFIG_PCIE_MOBIVEIL_HOST) += pcie-mobiveil-host.o
>  obj-$(CONFIG_PCIE_MOBIVEIL_PLAT) += pcie-mobiveil-plat.o
> +obj-$(CONFIG_PCI_LAYERSCAPE_GEN4) += pci-layerscape-gen4.o
> diff --git a/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c b/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
> new file mode 100644
> index 000000000000..174cbcac4059
> --- /dev/null
> +++ b/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
> @@ -0,0 +1,254 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCIe host controller driver for NXP Layerscape SoCs

It would be nice to make "NXP Layerscape SoCs" a little more specific
so we can tell how it's different from the existing pci-layerscape.c
that says "Freescale Layerscape SoCs".  I assume this driver only
works with gen4 parts.

> + * Copyright 2018 NXP

s/2018/2019/

> + *
> + * Author: Zhiqiang Hou <Zhiqiang.Hou@nxp.com>
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/interrupt.h>
> +#include <linux/init.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_address.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/resource.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +
> +#include "pcie-mobiveil.h"
> +
> +/* LUT and PF control registers */
> +#define PCIE_LUT_OFF			(0x80000)
> +#define PCIE_PF_OFF			(0xc0000)
> +#define PCIE_PF_INT_STAT		(0x18)
> +#define PF_INT_STAT_PABRST		(31)

You mix constants that are

  - the bit position (like this), and
  - the actual bit mask, like PAB_INTP_RESET

Pick one and use a single style.  My personal preference is a plain
hex bit mask, e.g.,

  #define PF_INT_STAT_PABRST    0x80000000
  #define PAB_INTP_RESET        0x00000002

But some people like BIT() or the style you used for PAB_INTP_RESET:

  #define PAB_INTP_RESET        BIT(1)
  #define PAB_INTP_RESET        (0x1 << 1)

I definitely don't like the simple bit position like this:

  #define PF_INT_STAT_PABRST    31

because that means you have to repeat things like
"1 << PF_INT_STAT_PABRST" everywhere you use it.

> +#define PCIE_PF_DBG			(0x7fc)
> +#define PF_DBG_LTSSM_MASK		(0x3f)
> +#define PF_DBG_WE			(31)
> +#define PF_DBG_PABR			(27)

Parens are not needed around single constants like these.

> +#define LS_PCIE_G4_LTSSM_L0		0x2d /* L0 state */
> +
> +#define to_ls_pcie_g4(x)		platform_get_drvdata((x)->pdev)
> +
> +struct ls_pcie_g4 {
> +	struct mobiveil_pcie *pci;
> +	struct delayed_work dwork;
> +	int irq;
> +};
> +
> +static inline u32 ls_pcie_g4_lut_readl(struct ls_pcie_g4 *pcie, u32 off)
> +{
> +	return ioread32(pcie->pci->csr_axi_slave_base + PCIE_LUT_OFF + off);
> +}
> +
> +static inline void ls_pcie_g4_lut_writel(struct ls_pcie_g4 *pcie,
> +					 u32 off, u32 val)
> +{
> +	iowrite32(val, pcie->pci->csr_axi_slave_base + PCIE_LUT_OFF + off);
> +}
> +
> +static inline u32 ls_pcie_g4_pf_readl(struct ls_pcie_g4 *pcie, u32 off)
> +{
> +	return ioread32(pcie->pci->csr_axi_slave_base + PCIE_PF_OFF + off);
> +}
> +
> +static inline void ls_pcie_g4_pf_writel(struct ls_pcie_g4 *pcie,
> +					u32 off, u32 val)
> +{
> +	iowrite32(val, pcie->pci->csr_axi_slave_base + PCIE_PF_OFF + off);
> +}
> +
> +static bool ls_pcie_g4_is_bridge(struct ls_pcie_g4 *pcie)
> +{
> +	struct mobiveil_pcie *mv_pci = pcie->pci;
> +	u32 header_type;
> +
> +	header_type = csr_readb(mv_pci, PCI_HEADER_TYPE);
> +	header_type &= 0x7f;
> +
> +	return header_type == PCI_HEADER_TYPE_BRIDGE;
> +}
> +
> +static int ls_pcie_g4_link_up(struct mobiveil_pcie *pci)
> +{
> +	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(pci);
> +	u32 state;
> +
> +	state = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
> +	state =	state & PF_DBG_LTSSM_MASK;
> +
> +	if (state == LS_PCIE_G4_LTSSM_L0)
> +		return 1;
> +
> +	return 0;
> +}
> +
> +static void ls_pcie_g4_reinit_hw(struct ls_pcie_g4 *pcie)
> +{
> +	struct mobiveil_pcie *mv_pci = pcie->pci;
> +	u32 val, act_stat;
> +	int to = 100;
> +
> +	/* Poll for pab_csb_reset to set and PAB activity to clear */
> +	do {
> +		usleep_range(10, 15);
> +		val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_INT_STAT);
> +		act_stat = csr_readl(mv_pci, PAB_ACTIVITY_STAT);
> +	} while (((val & 1 << PF_INT_STAT_PABRST) == 0 || act_stat) && to--);
> +	if (to < 0) {
> +		dev_err(&mv_pci->pdev->dev, "poll PABRST&PABACT timeout\n");
> +		return;
> +	}
> +
> +	/* clear PEX_RESET bit in PEX_PF0_DBG register */
> +	val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
> +	val |= 1 << PF_DBG_WE;
> +	ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val);
> +
> +	val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
> +	val |= 1 << PF_DBG_PABR;
> +	ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val);
> +
> +	val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
> +	val &= ~(1 << PF_DBG_WE);
> +	ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val);
> +
> +	mobiveil_host_init(mv_pci, true);
> +
> +	to = 100;
> +	while (!ls_pcie_g4_link_up(mv_pci) && to--)
> +		usleep_range(200, 250);
> +	if (to < 0)
> +		dev_err(&mv_pci->pdev->dev, "PCIe link trainning timeout\n");

s/trainning/training/

> +}
> +
> +static irqreturn_t ls_pcie_g4_handler(int irq, void *dev_id)

Function name should include "irq_handler" or "isr".  Run

  git grep request_irq drivers/pci/controller/

and follow the existing conventions.

> +{
> +	struct ls_pcie_g4 *pcie = (struct ls_pcie_g4 *)dev_id;
> +	struct mobiveil_pcie *mv_pci = pcie->pci;
> +	u32 val;
> +
> +	val = csr_readl(mv_pci, PAB_INTP_AMBA_MISC_STAT);
> +	if (!val)
> +		return IRQ_NONE;
> +
> +	if (val & PAB_INTP_RESET)
> +		schedule_delayed_work(&pcie->dwork, msecs_to_jiffies(1));
> +
> +	csr_writel(mv_pci, val, PAB_INTP_AMBA_MISC_STAT);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int ls_pcie_g4_interrupt_init(struct mobiveil_pcie *mv_pci)
> +{
> +	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(mv_pci);
> +	u32 val;
> +	int ret;
> +
> +	pcie->irq = platform_get_irq_byname(mv_pci->pdev, "intr");
> +	if (pcie->irq < 0) {
> +		dev_err(&mv_pci->pdev->dev, "Can't get 'intr' irq.\n");

When you use &mv_pci->pdev->dev more than once, as you do here, please
add

  struct device *dev = &mv_pci->pdev->dev;

and use "dev" instead of repeating the whole "&mv_pci->pdev->dev"
expression.

s/irq./IRQ/ (Capitalize IRQ and omit period)

> +		return pcie->irq;
> +	}
> +	ret = devm_request_irq(&mv_pci->pdev->dev, pcie->irq,
> +			       ls_pcie_g4_handler, IRQF_SHARED,
> +			       mv_pci->pdev->name, pcie);
> +	if (ret) {
> +		dev_err(&mv_pci->pdev->dev, "Can't register PCIe IRQ.\n");

Omit period from message and maybe include the IRQ number.

All your messages should start with lower-case or all should start
with upper-case (the two in this function are capitalized, but the
others are not).

> +		return  ret;
> +	}
> +
> +	/* Enable interrupts */
> +	val = PAB_INTP_INTX_MASK | PAB_INTP_MSI | PAB_INTP_RESET |
> +	      PAB_INTP_PCIE_UE | PAB_INTP_IE_PMREDI | PAB_INTP_IE_EC;
> +	csr_writel(mv_pci, val, PAB_INTP_AMBA_MISC_ENB);
> +
> +	return 0;
> +}
> +
> +static void ls_pcie_g4_reset(struct work_struct *work)
> +{
> +	struct delayed_work *dwork = container_of(work, struct delayed_work,
> +						  work);
> +	struct ls_pcie_g4 *pcie = container_of(dwork, struct ls_pcie_g4, dwork);
> +	struct mobiveil_pcie *mv_pci = pcie->pci;
> +	u16 ctrl;
> +
> +	ctrl = csr_readw(mv_pci, PCI_BRIDGE_CONTROL);
> +	ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
> +	csr_writew(mv_pci, ctrl, PCI_BRIDGE_CONTROL);
> +	ls_pcie_g4_reinit_hw(pcie);
> +}
> +
> +static struct mobiveil_rp_ops ls_pcie_g4_rp_ops = {
> +	.interrupt_init = ls_pcie_g4_interrupt_init,
> +};
> +
> +static const struct mobiveil_pab_ops ls_pcie_g4_pab_ops = {
> +	.link_up = ls_pcie_g4_link_up,
> +};
> +
> +static int __init ls_pcie_g4_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct mobiveil_pcie *mv_pci;
> +	struct ls_pcie_g4 *pcie;
> +	struct device_node *np = dev->of_node;
> +	int ret;
> +
> +	if (!of_parse_phandle(np, "msi-parent", 0)) {
> +		dev_err(dev, "failed to find msi-parent\n");
> +		return -EINVAL;
> +	}
> +
> +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> +	if (!pcie)
> +		return -ENOMEM;
> +
> +	mv_pci = devm_kzalloc(dev, sizeof(*mv_pci), GFP_KERNEL);
> +	if (!mv_pci)
> +		return -ENOMEM;
> +
> +	mv_pci->pdev = pdev;
> +	mv_pci->ops = &ls_pcie_g4_pab_ops;
> +	mv_pci->rp.ops = &ls_pcie_g4_rp_ops;
> +	pcie->pci = mv_pci;
> +
> +	platform_set_drvdata(pdev, pcie);
> +
> +	INIT_DELAYED_WORK(&pcie->dwork, ls_pcie_g4_reset);
> +
> +	ret = mobiveil_pcie_host_probe(mv_pci);
> +	if (ret) {
> +		dev_err(dev, "fail to probe!\n");
> +		return  ret;
> +	}
> +
> +	if (!ls_pcie_g4_is_bridge(pcie))
> +		return -ENODEV;
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id ls_pcie_g4_of_match[] = {
> +	{ .compatible = "fsl,lx2160a-pcie", },
> +	{ },
> +};
> +
> +static struct platform_driver ls_pcie_g4_driver = {
> +	.driver = {
> +		.name = "layerscape-pcie-gen4",
> +		.of_match_table = ls_pcie_g4_of_match,
> +		.suppress_bind_attrs = true,
> +	},
> +};
> +
> +builtin_platform_driver_probe(ls_pcie_g4_driver, ls_pcie_g4_probe);
> diff --git a/drivers/pci/controller/mobiveil/pcie-mobiveil.h b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> index 0f5303962e88..0ccd6cee5f8f 100644
> --- a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> +++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> @@ -41,6 +41,8 @@
>  #define  PAGE_LO_MASK			0x3ff
>  #define  PAGE_SEL_OFFSET_SHIFT		10
>  
> +#define PAB_ACTIVITY_STAT		0x81c
> +
>  #define PAB_AXI_PIO_CTRL		0x0840
>  #define  APIO_EN_MASK			0xf
>  
> @@ -49,8 +51,18 @@
>  
>  #define PAB_INTP_AMBA_MISC_ENB		0x0b0c
>  #define PAB_INTP_AMBA_MISC_STAT		0x0b1c
> -#define  PAB_INTP_INTX_MASK		0x01e0
> -#define  PAB_INTP_MSI_MASK		0x8
> +#define  PAB_INTP_RESET			(0x1 << 1)
> +#define  PAB_INTP_MSI			(0x1 << 3)
> +#define  PAB_INTP_INTA			(0x1 << 5)
> +#define  PAB_INTP_INTB			(0x1 << 6)
> +#define  PAB_INTP_INTC			(0x1 << 7)
> +#define  PAB_INTP_INTD			(0x1 << 8)
> +#define  PAB_INTP_PCIE_UE		(0x1 << 9)
> +#define  PAB_INTP_IE_PMREDI		(0x1 << 29)
> +#define  PAB_INTP_IE_EC			(0x1 << 30)
> +#define  PAB_INTP_MSI_MASK		PAB_INTP_MSI
> +#define  PAB_INTP_INTX_MASK		(PAB_INTP_INTA | PAB_INTP_INTB |\
> +					PAB_INTP_INTC | PAB_INTP_INTD)
>  
>  #define PAB_AXI_AMAP_CTRL(win)		PAB_REG_ADDR(0x0ba0, win)
>  #define  WIN_ENABLE_SHIFT		0
> -- 
> 2.17.1
> 

WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Helgaas <helgaas@kernel.org>
To: "Z.q. Hou" <zhiqiang.hou@nxp.com>
Cc: "mark.rutland@arm.com" <mark.rutland@arm.com>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
	Xiaowei Bao <xiaowei.bao@nxp.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"l.subrahmanya@mobiveil.co.in" <l.subrahmanya@mobiveil.co.in>,
	"will.deacon@arm.com" <will.deacon@arm.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Leo Li <leoyang.li@nxp.com>, "M.h. Lian" <minghuan.lian@nxp.com>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	Mingkai Hu <mingkai.hu@nxp.com>,
	"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCHv4 24/28] PCI: mobiveil: add PCIe Gen4 RC driver for NXP Layerscape SoCs
Date: Mon, 11 Mar 2019 09:01:40 -0500	[thread overview]
Message-ID: <20190311140140.GA161843@google.com> (raw)
In-Reply-To: <20190311093130.7209-25-Zhiqiang.Hou@nxp.com>

On Mon, Mar 11, 2019 at 09:33:16AM +0000, Z.q. Hou wrote:
> From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> 
> This PCIe controller is based on the Mobiveil GPEX IP, which is
> compatible with the PCI Express™ Base Specification, Revision 4.0.
> 
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
> ---
> V4:
>  - no change
> 
>  drivers/pci/controller/mobiveil/Kconfig       |  10 +
>  drivers/pci/controller/mobiveil/Makefile      |   1 +
>  .../controller/mobiveil/pci-layerscape-gen4.c | 254 ++++++++++++++++++
>  .../pci/controller/mobiveil/pcie-mobiveil.h   |  16 +-
>  4 files changed, 279 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
> 
> diff --git a/drivers/pci/controller/mobiveil/Kconfig b/drivers/pci/controller/mobiveil/Kconfig
> index 64343c07bfed..3ddb7d6163a9 100644
> --- a/drivers/pci/controller/mobiveil/Kconfig
> +++ b/drivers/pci/controller/mobiveil/Kconfig
> @@ -21,4 +21,14 @@ config PCIE_MOBIVEIL_PLAT
>  	  Soft IP. It has up to 8 outbound and inbound windows
>  	  for address translation and it is a PCIe Gen4 IP.
>  
> +config PCI_LAYERSCAPE_GEN4
> +	bool "Freescale Layerscpe PCIe Gen4 controller"

"Layerscape"

> +	depends on PCI
> +	depends on OF && (ARM64 || ARCH_LAYERSCAPE)
> +	depends on PCI_MSI_IRQ_DOMAIN
> +	select PCIE_MOBIVEIL_HOST
> +	help
> +	  Say Y here if you want PCIe Gen4 controller support on
> +	  Layerscape SoCs. The PCIe controller can work in RC or
> +	  EP mode according to RCW[HOST_AGT_PEX] setting.
>  endmenu
> diff --git a/drivers/pci/controller/mobiveil/Makefile b/drivers/pci/controller/mobiveil/Makefile
> index 9fb6d1c6504d..ff66774ccac4 100644
> --- a/drivers/pci/controller/mobiveil/Makefile
> +++ b/drivers/pci/controller/mobiveil/Makefile
> @@ -2,3 +2,4 @@
>  obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
>  obj-$(CONFIG_PCIE_MOBIVEIL_HOST) += pcie-mobiveil-host.o
>  obj-$(CONFIG_PCIE_MOBIVEIL_PLAT) += pcie-mobiveil-plat.o
> +obj-$(CONFIG_PCI_LAYERSCAPE_GEN4) += pci-layerscape-gen4.o
> diff --git a/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c b/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
> new file mode 100644
> index 000000000000..174cbcac4059
> --- /dev/null
> +++ b/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
> @@ -0,0 +1,254 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCIe host controller driver for NXP Layerscape SoCs

It would be nice to make "NXP Layerscape SoCs" a little more specific
so we can tell how it's different from the existing pci-layerscape.c
that says "Freescale Layerscape SoCs".  I assume this driver only
works with gen4 parts.

> + * Copyright 2018 NXP

s/2018/2019/

> + *
> + * Author: Zhiqiang Hou <Zhiqiang.Hou@nxp.com>
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/interrupt.h>
> +#include <linux/init.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_address.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/resource.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +
> +#include "pcie-mobiveil.h"
> +
> +/* LUT and PF control registers */
> +#define PCIE_LUT_OFF			(0x80000)
> +#define PCIE_PF_OFF			(0xc0000)
> +#define PCIE_PF_INT_STAT		(0x18)
> +#define PF_INT_STAT_PABRST		(31)

You mix constants that are

  - the bit position (like this), and
  - the actual bit mask, like PAB_INTP_RESET

Pick one and use a single style.  My personal preference is a plain
hex bit mask, e.g.,

  #define PF_INT_STAT_PABRST    0x80000000
  #define PAB_INTP_RESET        0x00000002

But some people like BIT() or the style you used for PAB_INTP_RESET:

  #define PAB_INTP_RESET        BIT(1)
  #define PAB_INTP_RESET        (0x1 << 1)

I definitely don't like the simple bit position like this:

  #define PF_INT_STAT_PABRST    31

because that means you have to repeat things like
"1 << PF_INT_STAT_PABRST" everywhere you use it.

> +#define PCIE_PF_DBG			(0x7fc)
> +#define PF_DBG_LTSSM_MASK		(0x3f)
> +#define PF_DBG_WE			(31)
> +#define PF_DBG_PABR			(27)

Parens are not needed around single constants like these.

> +#define LS_PCIE_G4_LTSSM_L0		0x2d /* L0 state */
> +
> +#define to_ls_pcie_g4(x)		platform_get_drvdata((x)->pdev)
> +
> +struct ls_pcie_g4 {
> +	struct mobiveil_pcie *pci;
> +	struct delayed_work dwork;
> +	int irq;
> +};
> +
> +static inline u32 ls_pcie_g4_lut_readl(struct ls_pcie_g4 *pcie, u32 off)
> +{
> +	return ioread32(pcie->pci->csr_axi_slave_base + PCIE_LUT_OFF + off);
> +}
> +
> +static inline void ls_pcie_g4_lut_writel(struct ls_pcie_g4 *pcie,
> +					 u32 off, u32 val)
> +{
> +	iowrite32(val, pcie->pci->csr_axi_slave_base + PCIE_LUT_OFF + off);
> +}
> +
> +static inline u32 ls_pcie_g4_pf_readl(struct ls_pcie_g4 *pcie, u32 off)
> +{
> +	return ioread32(pcie->pci->csr_axi_slave_base + PCIE_PF_OFF + off);
> +}
> +
> +static inline void ls_pcie_g4_pf_writel(struct ls_pcie_g4 *pcie,
> +					u32 off, u32 val)
> +{
> +	iowrite32(val, pcie->pci->csr_axi_slave_base + PCIE_PF_OFF + off);
> +}
> +
> +static bool ls_pcie_g4_is_bridge(struct ls_pcie_g4 *pcie)
> +{
> +	struct mobiveil_pcie *mv_pci = pcie->pci;
> +	u32 header_type;
> +
> +	header_type = csr_readb(mv_pci, PCI_HEADER_TYPE);
> +	header_type &= 0x7f;
> +
> +	return header_type == PCI_HEADER_TYPE_BRIDGE;
> +}
> +
> +static int ls_pcie_g4_link_up(struct mobiveil_pcie *pci)
> +{
> +	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(pci);
> +	u32 state;
> +
> +	state = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
> +	state =	state & PF_DBG_LTSSM_MASK;
> +
> +	if (state == LS_PCIE_G4_LTSSM_L0)
> +		return 1;
> +
> +	return 0;
> +}
> +
> +static void ls_pcie_g4_reinit_hw(struct ls_pcie_g4 *pcie)
> +{
> +	struct mobiveil_pcie *mv_pci = pcie->pci;
> +	u32 val, act_stat;
> +	int to = 100;
> +
> +	/* Poll for pab_csb_reset to set and PAB activity to clear */
> +	do {
> +		usleep_range(10, 15);
> +		val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_INT_STAT);
> +		act_stat = csr_readl(mv_pci, PAB_ACTIVITY_STAT);
> +	} while (((val & 1 << PF_INT_STAT_PABRST) == 0 || act_stat) && to--);
> +	if (to < 0) {
> +		dev_err(&mv_pci->pdev->dev, "poll PABRST&PABACT timeout\n");
> +		return;
> +	}
> +
> +	/* clear PEX_RESET bit in PEX_PF0_DBG register */
> +	val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
> +	val |= 1 << PF_DBG_WE;
> +	ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val);
> +
> +	val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
> +	val |= 1 << PF_DBG_PABR;
> +	ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val);
> +
> +	val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
> +	val &= ~(1 << PF_DBG_WE);
> +	ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val);
> +
> +	mobiveil_host_init(mv_pci, true);
> +
> +	to = 100;
> +	while (!ls_pcie_g4_link_up(mv_pci) && to--)
> +		usleep_range(200, 250);
> +	if (to < 0)
> +		dev_err(&mv_pci->pdev->dev, "PCIe link trainning timeout\n");

s/trainning/training/

> +}
> +
> +static irqreturn_t ls_pcie_g4_handler(int irq, void *dev_id)

Function name should include "irq_handler" or "isr".  Run

  git grep request_irq drivers/pci/controller/

and follow the existing conventions.

> +{
> +	struct ls_pcie_g4 *pcie = (struct ls_pcie_g4 *)dev_id;
> +	struct mobiveil_pcie *mv_pci = pcie->pci;
> +	u32 val;
> +
> +	val = csr_readl(mv_pci, PAB_INTP_AMBA_MISC_STAT);
> +	if (!val)
> +		return IRQ_NONE;
> +
> +	if (val & PAB_INTP_RESET)
> +		schedule_delayed_work(&pcie->dwork, msecs_to_jiffies(1));
> +
> +	csr_writel(mv_pci, val, PAB_INTP_AMBA_MISC_STAT);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int ls_pcie_g4_interrupt_init(struct mobiveil_pcie *mv_pci)
> +{
> +	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(mv_pci);
> +	u32 val;
> +	int ret;
> +
> +	pcie->irq = platform_get_irq_byname(mv_pci->pdev, "intr");
> +	if (pcie->irq < 0) {
> +		dev_err(&mv_pci->pdev->dev, "Can't get 'intr' irq.\n");

When you use &mv_pci->pdev->dev more than once, as you do here, please
add

  struct device *dev = &mv_pci->pdev->dev;

and use "dev" instead of repeating the whole "&mv_pci->pdev->dev"
expression.

s/irq./IRQ/ (Capitalize IRQ and omit period)

> +		return pcie->irq;
> +	}
> +	ret = devm_request_irq(&mv_pci->pdev->dev, pcie->irq,
> +			       ls_pcie_g4_handler, IRQF_SHARED,
> +			       mv_pci->pdev->name, pcie);
> +	if (ret) {
> +		dev_err(&mv_pci->pdev->dev, "Can't register PCIe IRQ.\n");

Omit period from message and maybe include the IRQ number.

All your messages should start with lower-case or all should start
with upper-case (the two in this function are capitalized, but the
others are not).

> +		return  ret;
> +	}
> +
> +	/* Enable interrupts */
> +	val = PAB_INTP_INTX_MASK | PAB_INTP_MSI | PAB_INTP_RESET |
> +	      PAB_INTP_PCIE_UE | PAB_INTP_IE_PMREDI | PAB_INTP_IE_EC;
> +	csr_writel(mv_pci, val, PAB_INTP_AMBA_MISC_ENB);
> +
> +	return 0;
> +}
> +
> +static void ls_pcie_g4_reset(struct work_struct *work)
> +{
> +	struct delayed_work *dwork = container_of(work, struct delayed_work,
> +						  work);
> +	struct ls_pcie_g4 *pcie = container_of(dwork, struct ls_pcie_g4, dwork);
> +	struct mobiveil_pcie *mv_pci = pcie->pci;
> +	u16 ctrl;
> +
> +	ctrl = csr_readw(mv_pci, PCI_BRIDGE_CONTROL);
> +	ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
> +	csr_writew(mv_pci, ctrl, PCI_BRIDGE_CONTROL);
> +	ls_pcie_g4_reinit_hw(pcie);
> +}
> +
> +static struct mobiveil_rp_ops ls_pcie_g4_rp_ops = {
> +	.interrupt_init = ls_pcie_g4_interrupt_init,
> +};
> +
> +static const struct mobiveil_pab_ops ls_pcie_g4_pab_ops = {
> +	.link_up = ls_pcie_g4_link_up,
> +};
> +
> +static int __init ls_pcie_g4_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct mobiveil_pcie *mv_pci;
> +	struct ls_pcie_g4 *pcie;
> +	struct device_node *np = dev->of_node;
> +	int ret;
> +
> +	if (!of_parse_phandle(np, "msi-parent", 0)) {
> +		dev_err(dev, "failed to find msi-parent\n");
> +		return -EINVAL;
> +	}
> +
> +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> +	if (!pcie)
> +		return -ENOMEM;
> +
> +	mv_pci = devm_kzalloc(dev, sizeof(*mv_pci), GFP_KERNEL);
> +	if (!mv_pci)
> +		return -ENOMEM;
> +
> +	mv_pci->pdev = pdev;
> +	mv_pci->ops = &ls_pcie_g4_pab_ops;
> +	mv_pci->rp.ops = &ls_pcie_g4_rp_ops;
> +	pcie->pci = mv_pci;
> +
> +	platform_set_drvdata(pdev, pcie);
> +
> +	INIT_DELAYED_WORK(&pcie->dwork, ls_pcie_g4_reset);
> +
> +	ret = mobiveil_pcie_host_probe(mv_pci);
> +	if (ret) {
> +		dev_err(dev, "fail to probe!\n");
> +		return  ret;
> +	}
> +
> +	if (!ls_pcie_g4_is_bridge(pcie))
> +		return -ENODEV;
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id ls_pcie_g4_of_match[] = {
> +	{ .compatible = "fsl,lx2160a-pcie", },
> +	{ },
> +};
> +
> +static struct platform_driver ls_pcie_g4_driver = {
> +	.driver = {
> +		.name = "layerscape-pcie-gen4",
> +		.of_match_table = ls_pcie_g4_of_match,
> +		.suppress_bind_attrs = true,
> +	},
> +};
> +
> +builtin_platform_driver_probe(ls_pcie_g4_driver, ls_pcie_g4_probe);
> diff --git a/drivers/pci/controller/mobiveil/pcie-mobiveil.h b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> index 0f5303962e88..0ccd6cee5f8f 100644
> --- a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> +++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> @@ -41,6 +41,8 @@
>  #define  PAGE_LO_MASK			0x3ff
>  #define  PAGE_SEL_OFFSET_SHIFT		10
>  
> +#define PAB_ACTIVITY_STAT		0x81c
> +
>  #define PAB_AXI_PIO_CTRL		0x0840
>  #define  APIO_EN_MASK			0xf
>  
> @@ -49,8 +51,18 @@
>  
>  #define PAB_INTP_AMBA_MISC_ENB		0x0b0c
>  #define PAB_INTP_AMBA_MISC_STAT		0x0b1c
> -#define  PAB_INTP_INTX_MASK		0x01e0
> -#define  PAB_INTP_MSI_MASK		0x8
> +#define  PAB_INTP_RESET			(0x1 << 1)
> +#define  PAB_INTP_MSI			(0x1 << 3)
> +#define  PAB_INTP_INTA			(0x1 << 5)
> +#define  PAB_INTP_INTB			(0x1 << 6)
> +#define  PAB_INTP_INTC			(0x1 << 7)
> +#define  PAB_INTP_INTD			(0x1 << 8)
> +#define  PAB_INTP_PCIE_UE		(0x1 << 9)
> +#define  PAB_INTP_IE_PMREDI		(0x1 << 29)
> +#define  PAB_INTP_IE_EC			(0x1 << 30)
> +#define  PAB_INTP_MSI_MASK		PAB_INTP_MSI
> +#define  PAB_INTP_INTX_MASK		(PAB_INTP_INTA | PAB_INTP_INTB |\
> +					PAB_INTP_INTC | PAB_INTP_INTD)
>  
>  #define PAB_AXI_AMAP_CTRL(win)		PAB_REG_ADDR(0x0ba0, win)
>  #define  WIN_ENABLE_SHIFT		0
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-03-11 14:01 UTC|newest]

Thread overview: 158+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-11  9:29 [PATCHv4 00/28] PCI: refactor Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs Z.q. Hou
2019-03-11  9:29 ` Z.q. Hou
2019-03-11  9:29 ` Z.q. Hou
2019-03-11  9:30 ` [PATCHv4 01/28] PCI: mobiveil: uniform the register accessors Z.q. Hou
2019-03-11  9:30   ` Z.q. Hou
2019-03-11  9:30   ` Z.q. Hou
2019-03-11  9:30 ` [PATCHv4 02/28] PCI: mobiveil: format the code without function change Z.q. Hou
2019-03-11  9:30   ` Z.q. Hou
2019-03-11  9:30   ` Z.q. Hou
2019-03-11  9:30 ` [PATCHv4 03/28] PCI: mobiveil: correct the returned error number Z.q. Hou
2019-03-11  9:30   ` Z.q. Hou
2019-03-11  9:30   ` Z.q. Hou
2019-03-11  9:30 ` [PATCHv4 04/28] PCI: mobiveil: remove flag MSI_FLAG_MULTI_PCI_MSI Z.q. Hou
2019-03-11  9:30   ` Z.q. Hou
2019-03-11  9:30   ` Z.q. Hou
2019-03-11  9:30 ` [PATCHv4 05/28] PCI: mobiveil: correct PCI base address in MEM/IO outbound windows Z.q. Hou
2019-03-11  9:30   ` Z.q. Hou
2019-03-11  9:30   ` Z.q. Hou
2019-03-11  9:30 ` [PATCHv4 06/28] PCI: mobiveil: replace the resource list iteration function Z.q. Hou
2019-03-11  9:30   ` Z.q. Hou
2019-03-11  9:30   ` Z.q. Hou
2019-03-11  9:30 ` [PATCHv4 07/28] PCI: mobiveil: use WIN_NUM_0 explicitly for CFG outbound window Z.q. Hou
2019-03-11  9:30   ` Z.q. Hou
2019-03-11  9:30   ` Z.q. Hou
2019-03-11  9:31 ` [PATCHv4 08/28] PCI: mobiveil: use the 1st inbound window for MEM inbound transactions Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11  9:31 ` [PATCHv4 09/28] PCI: mobiveil: correct inbound/outbound window setup routines Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11  9:31 ` [PATCHv4 10/28] PCI: mobiveil: fix the INTx process error Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11 14:08   ` Bjorn Helgaas
2019-03-11 14:08     ` Bjorn Helgaas
2019-03-11 14:08     ` Bjorn Helgaas
2019-03-12  4:42     ` Z.q. Hou
2019-03-12  4:42       ` Z.q. Hou
2019-03-12  4:42       ` Z.q. Hou
2019-03-11  9:31 ` [PATCHv4 11/28] PCI: mobiveil: only fix up the Class Code field Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11 14:14   ` Bjorn Helgaas
2019-03-11 14:14     ` Bjorn Helgaas
2019-03-11 14:14     ` Bjorn Helgaas
2019-03-12  9:17     ` Z.q. Hou
2019-03-12  9:17       ` Z.q. Hou
2019-03-12  9:17       ` Z.q. Hou
2019-03-13 10:59       ` Subrahmanya Lingappa
2019-03-13 10:59         ` Subrahmanya Lingappa
2019-03-13 10:59         ` Subrahmanya Lingappa
2019-03-11  9:31 ` [PATCHv4 12/28] PCI: mobiveil: move out the link up waiting from mobiveil_host_init Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11  9:31 ` [PATCHv4 13/28] PCI: mobiveil: move irq chained handler setup out of DT parse Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11  9:31 ` [PATCHv4 14/28] PCI: mobiveil: initialize Primary/Secondary/Subordinate bus number Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11  9:31 ` [PATCHv4 15/28] dt-bindings: pci: mobiveil: change gpio_slave and apb_csr to optional Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11  9:31   ` Z.q. Hou
2019-03-11  9:32 ` [PATCHv4 16/28] PCI: mobiveil: refactor Mobiveil PCIe Host Bridge IP driver Z.q. Hou
2019-03-11  9:32   ` Z.q. Hou
2019-03-11  9:32   ` Z.q. Hou
2019-03-26 17:34   ` Lorenzo Pieralisi
2019-03-26 17:34     ` Lorenzo Pieralisi
2019-03-26 17:34     ` Lorenzo Pieralisi
2019-03-27  2:04     ` Z.q. Hou
2019-03-27  2:04       ` Z.q. Hou
2019-03-27 17:39       ` Lorenzo Pieralisi
2019-03-27 17:39         ` Lorenzo Pieralisi
2019-03-27 17:39         ` Lorenzo Pieralisi
2019-03-28  2:09         ` Z.q. Hou
2019-03-28  2:09           ` Z.q. Hou
2019-03-28 16:09           ` Lorenzo Pieralisi
2019-03-28 16:09             ` Lorenzo Pieralisi
2019-03-28 16:09             ` Lorenzo Pieralisi
2019-03-29  6:07             ` Z.q. Hou
2019-03-29  6:07               ` Z.q. Hou
2019-03-11  9:32 ` [PATCHv4 17/28] PCI: mobiveil: fix the checking of valid device Z.q. Hou
2019-03-11  9:32   ` Z.q. Hou
2019-03-11  9:32   ` Z.q. Hou
2019-03-11  9:32 ` [PATCHv4 18/28] PCI: mobiveil: add link up condition check Z.q. Hou
2019-03-11  9:32   ` Z.q. Hou
2019-03-11  9:32   ` Z.q. Hou
2019-03-11  9:32 ` [PATCHv4 19/28] PCI: mobiveil: continue to initialize the host upon no PCIe link Z.q. Hou
2019-03-11  9:32   ` Z.q. Hou
2019-03-11  9:32   ` Z.q. Hou
2019-03-11  9:32 ` [PATCHv4 20/28] PCI: mobiveil: disabled IB and OB windows set by bootloader Z.q. Hou
2019-03-11  9:32   ` Z.q. Hou
2019-03-11  9:32   ` Z.q. Hou
2019-03-11  9:32 ` [PATCHv4 21/28] PCI: mobiveil: add Byte and Half-Word width register accessors Z.q. Hou
2019-03-11  9:32   ` Z.q. Hou
2019-03-11  9:32   ` Z.q. Hou
2019-03-11  9:32 ` [PATCHv4 22/28] PCI: mobiveil: make mobiveil_host_init can be used to re-init host Z.q. Hou
2019-03-11  9:32   ` Z.q. Hou
2019-03-11  9:32   ` Z.q. Hou
2019-03-11  9:33 ` [PATCHv4 23/28] dt-bindings: pci: Add NXP Layerscape SoCs PCIe Gen4 controller Z.q. Hou
2019-03-11  9:33   ` Z.q. Hou
2019-03-11  9:33   ` Z.q. Hou
2019-03-11 22:11   ` Rob Herring
2019-03-11 22:11     ` Rob Herring
2019-03-11 22:11     ` Rob Herring
2019-03-12  3:17     ` Z.q. Hou
2019-03-12  3:17       ` Z.q. Hou
2019-03-12  3:17       ` Z.q. Hou
2019-03-12  9:42   ` Z.q. Hou
2019-03-12  9:42     ` Z.q. Hou
2019-03-11  9:33 ` [PATCHv4 24/28] PCI: mobiveil: add PCIe Gen4 RC driver for NXP Layerscape SoCs Z.q. Hou
2019-03-11  9:33   ` Z.q. Hou
2019-03-11  9:33   ` Z.q. Hou
2019-03-11 14:01   ` Bjorn Helgaas [this message]
2019-03-11 14:01     ` Bjorn Helgaas
2019-03-11 14:01     ` Bjorn Helgaas
2019-03-12  4:40     ` Z.q. Hou
2019-03-12  4:40       ` Z.q. Hou
2019-03-11  9:33 ` [PATCHv4 25/28] PCI: mobiveil: ls_pcie_g4: add Workaround for A-011577 Z.q. Hou
2019-03-11  9:33   ` Z.q. Hou
2019-03-11  9:33   ` Z.q. Hou
2019-03-13 14:51   ` Z.q. Hou
2019-03-13 14:51     ` Z.q. Hou
2019-03-13 14:51     ` Z.q. Hou
2019-03-11  9:33 ` [PATCHv4 26/28] PCI: mobiveil: ls_pcie_g4: add Workaround for A-011451 Z.q. Hou
2019-03-11  9:33   ` Z.q. Hou
2019-03-11  9:33   ` Z.q. Hou
2019-03-11 17:34   ` Bjorn Helgaas
2019-03-11 17:34     ` Bjorn Helgaas
2019-03-11 17:34     ` Bjorn Helgaas
2019-03-12  9:34     ` Z.q. Hou
2019-03-12  9:34       ` Z.q. Hou
2019-03-12  9:34       ` Z.q. Hou
2019-03-12 13:34       ` Bjorn Helgaas
2019-03-12 13:34         ` Bjorn Helgaas
2019-03-12 13:34         ` Bjorn Helgaas
2019-03-13 14:49         ` Z.q. Hou
2019-03-13 14:49           ` Z.q. Hou
2019-03-13 14:49           ` Z.q. Hou
2019-03-13 14:51   ` Z.q. Hou
2019-03-13 14:51     ` Z.q. Hou
2019-03-11  9:33 ` [PATCHv4 27/28] arm64: dts: freescale: lx2160a: add pcie DT nodes Z.q. Hou
2019-03-11  9:33   ` Z.q. Hou
2019-03-11  9:33   ` Z.q. Hou
2019-03-11  9:33 ` [PATCHv4 28/28] arm64: defconfig: Enable CONFIG_PCI_LAYERSCAPE_GEN4 Z.q. Hou
2019-03-11  9:33   ` Z.q. Hou
2019-03-11  9:33   ` Z.q. Hou
2019-03-11 13:33 ` [PATCHv4 00/28] PCI: refactor Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs Bjorn Helgaas
2019-03-11 13:33   ` Bjorn Helgaas
2019-03-11 13:33   ` Bjorn Helgaas
2019-03-12  4:18   ` Z.q. Hou
2019-03-12  4:18     ` Z.q. Hou
2019-03-26 17:37 ` Lorenzo Pieralisi
2019-03-26 17:37   ` Lorenzo Pieralisi
2019-03-26 17:37   ` Lorenzo Pieralisi
2019-03-27  2:11   ` Z.q. Hou
2019-03-27  2:11     ` Z.q. Hou
2019-03-27  2:11     ` Z.q. Hou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190311140140.GA161843@google.com \
    --to=helgaas@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=l.subrahmanya@mobiveil.co.in \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=minghuan.lian@nxp.com \
    --cc=mingkai.hu@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=will.deacon@arm.com \
    --cc=xiaowei.bao@nxp.com \
    --cc=zhiqiang.hou@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.