[PATCH 07/15] phy: mvebu-cp110-comphy: Add USB3 host/device support

From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Gregory Clement <gregory.clement@bootlin.com>,
	Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Kishon Vijay Abraham I <kishon@ti.com>
Cc: devicetree@vger.kernel.org,
	Antoine Tenart <antoine.tenart@bootlin.com>,
	Russell King <linux@armlinux.org.uk>,
	Maxime Chevallier <maxime.chevallier@bootlin.com>,
	Nadav Haklai <nadavh@marvell.com>,
	Rob Herring <robh+dt@kernel.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/15] phy: mvebu-cp110-comphy: Add USB3 host/device support
Date: Mon,  1 Apr 2019 18:51:23 +0200	[thread overview]
Message-ID: <20190401165131.23370-8-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20190401165131.23370-1-miquel.raynal@bootlin.com>

Add USB3 host/device support by adding the right entries in the COMPHY
modes table. A new macro is created to instantiate a "generic" mode
ie. not an Ethernet one. This macro will be re-used when adding SATA
support.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 24 ++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index 21431e3e085a..3eb92a629dcc 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -148,6 +148,8 @@
 
 #define COMPHY_FW_MODE_SGMII		0x2 /* SGMII 1G */
 #define COMPHY_FW_MODE_HS_SGMII		0x3 /* SGMII 2.5G */
+#define COMPHY_FW_MODE_USB3H		0x4
+#define COMPHY_FW_MODE_USB3D		0x5
 #define COMPHY_FW_MODE_RXAUI		0x7
 #define COMPHY_FW_MODE_SFI		0x9 /* XFI: 0x8 (is treated like SFI) */
 
@@ -170,11 +172,23 @@ struct mvebu_comphy_conf {
 		.fw_mode = _fw,				\
 	}
 
+#define GEN_CONF(_lane, _port, _mode, _fw)		\
+	{						\
+		.lane = _lane,				\
+		.port = _port,				\
+		.mode = _mode,				\
+		.submode = PHY_INTERFACE_MODE_NA,	\
+		.mux = -1,				\
+		.fw_mode = _fw,				\
+	}
+
 static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
 	/* lane 0 */
 	ETH_CONF(0, 1, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
 	ETH_CONF(0, 1, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII),
 	/* lane 1 */
+	GEN_CONF(1, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
+	GEN_CONF(1, 0, PHY_MODE_USB_DEVICE_SS, COMPHY_FW_MODE_USB3D),
 	ETH_CONF(1, 2, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
 	ETH_CONF(1, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII),
 	/* lane 2 */
@@ -182,15 +196,19 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
 	ETH_CONF(2, 0, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII),
 	ETH_CONF(2, 0, PHY_INTERFACE_MODE_RXAUI, -1, COMPHY_FW_MODE_RXAUI),
 	ETH_CONF(2, 0, PHY_INTERFACE_MODE_10GKR, 0x1, COMPHY_FW_MODE_SFI),
+	GEN_CONF(2, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
 	/* lane 3 */
 	ETH_CONF(3, 1, PHY_INTERFACE_MODE_SGMII, 0x2, COMPHY_FW_MODE_SGMII),
 	ETH_CONF(3, 1, PHY_INTERFACE_MODE_2500BASEX, 0x2, COMPHY_FW_MODE_HS_SGMII),
 	ETH_CONF(3, 1, PHY_INTERFACE_MODE_RXAUI, -1, COMPHY_FW_MODE_RXAUI),
+	GEN_CONF(3, 1, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
 	/* lane 4 */
 	ETH_CONF(4, 0, PHY_INTERFACE_MODE_SGMII, 0x2, COMPHY_FW_MODE_SGMII),
 	ETH_CONF(4, 0, PHY_INTERFACE_MODE_2500BASEX, 0x2, COMPHY_FW_MODE_HS_SGMII),
 	ETH_CONF(4, 0, PHY_INTERFACE_MODE_10GKR, 0x2, COMPHY_FW_MODE_SFI),
 	ETH_CONF(4, 0, PHY_INTERFACE_MODE_RXAUI, -1, COMPHY_FW_MODE_RXAUI),
+	GEN_CONF(4, 0, PHY_MODE_USB_DEVICE_SS, COMPHY_FW_MODE_USB3D),
+	GEN_CONF(4, 1, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
 	ETH_CONF(4, 1, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
 	ETH_CONF(4, 1, PHY_INTERFACE_MODE_2500BASEX, -1, COMPHY_FW_MODE_HS_SGMII),
 	ETH_CONF(4, 1, PHY_INTERFACE_MODE_10GKR, -1, COMPHY_FW_MODE_SFI),
@@ -619,6 +637,12 @@ static int mvebu_comphy_power_on(struct phy *phy)
 			return -ENOTSUPP;
 		}
 		break;
+	case PHY_MODE_USB_HOST_SS:
+	case PHY_MODE_USB_DEVICE_SS:
+		hide_error = true;
+		dev_dbg(priv->dev, "set lane %d to USB3 mode\n", lane->id);
+		fw_param = COMPHY_FW_PARAM(fw_mode, lane->port);
+		break;
 	default:
 		dev_err(priv->dev, "unsupported PHY mode (%d)\n", lane->mode);
 		return -ENOTSUPP;
-- 
2.19.1
