From: Kishon Vijay Abraham I <kishon@ti.com>
To: Tom Joseph <tjoseph@cadence.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Arnd Bergmann <arnd@arndb.de>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Frank Rowand <frowand.list@gmail.com>,
Jingoo Han <jingoohan1@gmail.com>, <linux-pci@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-omap@vger.kernel.org>,
<linux-rockchip@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>,
Kishon Vijay Abraham I <kishon@ti.com>
Subject: [RFC PATCH 28/30] misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
Date: Tue, 4 Jun 2019 18:45:14 +0530 [thread overview]
Message-ID: <20190604131516.13596-29-kishon@ti.com> (raw)
In-Reply-To: <20190604131516.13596-1-kishon@ti.com>
commit e03327122e2c8e6ae4565ef ("pci_endpoint_test: Add 2 ioctl
commands") uses module parameter in pci_endpoint_test_set_irq()
'irqtype' to check if irq vectors of a particular type is already
allocated. However with multi-function devices, irqtype will not
correctly reflect the irq type of the PCI device. Fix it here by
adding 'irqtype' for each PCI device to shows the irq type of that
particular PCI device.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/misc/pci_endpoint_test.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 98a60f4d45a1..632c76e33e4e 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -110,6 +110,7 @@ struct pci_endpoint_test {
struct completion irq_raised;
int last_irq;
int num_irqs;
+ int irq_type;
/* mutex to protect the ioctls */
struct mutex mutex;
struct miscdevice miscdev;
@@ -169,6 +170,7 @@ static void pci_endpoint_test_free_irq_vectors(struct pci_endpoint_test *test)
struct pci_dev *pdev = test->pdev;
pci_free_irq_vectors(pdev);
+ test->irq_type = IRQ_TYPE_UNDEFINED;
}
static bool pci_endpoint_test_alloc_irq_vectors(struct pci_endpoint_test *test,
@@ -203,6 +205,8 @@ static bool pci_endpoint_test_alloc_irq_vectors(struct pci_endpoint_test *test,
irq = 0;
res = false;
}
+
+ test->irq_type = type;
test->num_irqs = irq;
return res;
@@ -342,6 +346,7 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
dma_addr_t orig_dst_phys_addr;
size_t offset;
size_t alignment = test->alignment;
+ int irq_type = test->irq_type;
u32 src_crc32;
u32 dst_crc32;
@@ -438,6 +443,7 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
dma_addr_t orig_phys_addr;
size_t offset;
size_t alignment = test->alignment;
+ int irq_type = test->irq_type;
u32 crc32;
if (size > SIZE_MAX - alignment)
@@ -506,6 +512,7 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size)
dma_addr_t orig_phys_addr;
size_t offset;
size_t alignment = test->alignment;
+ int irq_type = test->irq_type;
u32 crc32;
if (size > SIZE_MAX - alignment)
@@ -567,7 +574,7 @@ static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
return false;
}
- if (irq_type == req_irq_type)
+ if (test->irq_type == req_irq_type)
return true;
pci_endpoint_test_release_irq(test);
@@ -579,12 +586,10 @@ static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
if (!pci_endpoint_test_request_irq(test))
goto err;
- irq_type = req_irq_type;
return true;
err:
pci_endpoint_test_free_irq_vectors(test);
- irq_type = IRQ_TYPE_UNDEFINED;
return false;
}
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Tom Joseph <tjoseph@cadence.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Arnd Bergmann <arnd@arndb.de>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Frank Rowand <frowand.list@gmail.com>,
Jingoo Han <jingoohan1@gmail.com>,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Kishon Vijay Abraham I <kishon@ti.com>
Subject: [RFC PATCH 28/30] misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
Date: Tue, 4 Jun 2019 18:45:14 +0530 [thread overview]
Message-ID: <20190604131516.13596-29-kishon@ti.com> (raw)
In-Reply-To: <20190604131516.13596-1-kishon@ti.com>
commit e03327122e2c8e6ae4565ef ("pci_endpoint_test: Add 2 ioctl
commands") uses module parameter in pci_endpoint_test_set_irq()
'irqtype' to check if irq vectors of a particular type is already
allocated. However with multi-function devices, irqtype will not
correctly reflect the irq type of the PCI device. Fix it here by
adding 'irqtype' for each PCI device to shows the irq type of that
particular PCI device.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/misc/pci_endpoint_test.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 98a60f4d45a1..632c76e33e4e 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -110,6 +110,7 @@ struct pci_endpoint_test {
struct completion irq_raised;
int last_irq;
int num_irqs;
+ int irq_type;
/* mutex to protect the ioctls */
struct mutex mutex;
struct miscdevice miscdev;
@@ -169,6 +170,7 @@ static void pci_endpoint_test_free_irq_vectors(struct pci_endpoint_test *test)
struct pci_dev *pdev = test->pdev;
pci_free_irq_vectors(pdev);
+ test->irq_type = IRQ_TYPE_UNDEFINED;
}
static bool pci_endpoint_test_alloc_irq_vectors(struct pci_endpoint_test *test,
@@ -203,6 +205,8 @@ static bool pci_endpoint_test_alloc_irq_vectors(struct pci_endpoint_test *test,
irq = 0;
res = false;
}
+
+ test->irq_type = type;
test->num_irqs = irq;
return res;
@@ -342,6 +346,7 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
dma_addr_t orig_dst_phys_addr;
size_t offset;
size_t alignment = test->alignment;
+ int irq_type = test->irq_type;
u32 src_crc32;
u32 dst_crc32;
@@ -438,6 +443,7 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
dma_addr_t orig_phys_addr;
size_t offset;
size_t alignment = test->alignment;
+ int irq_type = test->irq_type;
u32 crc32;
if (size > SIZE_MAX - alignment)
@@ -506,6 +512,7 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size)
dma_addr_t orig_phys_addr;
size_t offset;
size_t alignment = test->alignment;
+ int irq_type = test->irq_type;
u32 crc32;
if (size > SIZE_MAX - alignment)
@@ -567,7 +574,7 @@ static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
return false;
}
- if (irq_type == req_irq_type)
+ if (test->irq_type == req_irq_type)
return true;
pci_endpoint_test_release_irq(test);
@@ -579,12 +586,10 @@ static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
if (!pci_endpoint_test_request_irq(test))
goto err;
- irq_type = req_irq_type;
return true;
err:
pci_endpoint_test_free_irq_vectors(test);
- irq_type = IRQ_TYPE_UNDEFINED;
return false;
}
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Tom Joseph <tjoseph@cadence.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Arnd Bergmann <arnd@arndb.de>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: devicetree@vger.kernel.org, Jingoo Han <jingoohan1@gmail.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Kishon Vijay Abraham I <kishon@ti.com>,
linux-rockchip@lists.infradead.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-omap@vger.kernel.org, Frank Rowand <frowand.list@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 28/30] misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
Date: Tue, 4 Jun 2019 18:45:14 +0530 [thread overview]
Message-ID: <20190604131516.13596-29-kishon@ti.com> (raw)
In-Reply-To: <20190604131516.13596-1-kishon@ti.com>
commit e03327122e2c8e6ae4565ef ("pci_endpoint_test: Add 2 ioctl
commands") uses module parameter in pci_endpoint_test_set_irq()
'irqtype' to check if irq vectors of a particular type is already
allocated. However with multi-function devices, irqtype will not
correctly reflect the irq type of the PCI device. Fix it here by
adding 'irqtype' for each PCI device to shows the irq type of that
particular PCI device.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/misc/pci_endpoint_test.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 98a60f4d45a1..632c76e33e4e 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -110,6 +110,7 @@ struct pci_endpoint_test {
struct completion irq_raised;
int last_irq;
int num_irqs;
+ int irq_type;
/* mutex to protect the ioctls */
struct mutex mutex;
struct miscdevice miscdev;
@@ -169,6 +170,7 @@ static void pci_endpoint_test_free_irq_vectors(struct pci_endpoint_test *test)
struct pci_dev *pdev = test->pdev;
pci_free_irq_vectors(pdev);
+ test->irq_type = IRQ_TYPE_UNDEFINED;
}
static bool pci_endpoint_test_alloc_irq_vectors(struct pci_endpoint_test *test,
@@ -203,6 +205,8 @@ static bool pci_endpoint_test_alloc_irq_vectors(struct pci_endpoint_test *test,
irq = 0;
res = false;
}
+
+ test->irq_type = type;
test->num_irqs = irq;
return res;
@@ -342,6 +346,7 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
dma_addr_t orig_dst_phys_addr;
size_t offset;
size_t alignment = test->alignment;
+ int irq_type = test->irq_type;
u32 src_crc32;
u32 dst_crc32;
@@ -438,6 +443,7 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
dma_addr_t orig_phys_addr;
size_t offset;
size_t alignment = test->alignment;
+ int irq_type = test->irq_type;
u32 crc32;
if (size > SIZE_MAX - alignment)
@@ -506,6 +512,7 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size)
dma_addr_t orig_phys_addr;
size_t offset;
size_t alignment = test->alignment;
+ int irq_type = test->irq_type;
u32 crc32;
if (size > SIZE_MAX - alignment)
@@ -567,7 +574,7 @@ static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
return false;
}
- if (irq_type == req_irq_type)
+ if (test->irq_type == req_irq_type)
return true;
pci_endpoint_test_release_irq(test);
@@ -579,12 +586,10 @@ static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
if (!pci_endpoint_test_request_irq(test))
goto err;
- irq_type = req_irq_type;
return true;
err:
pci_endpoint_test_free_irq_vectors(test);
- irq_type = IRQ_TYPE_UNDEFINED;
return false;
}
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-06-04 13:20 UTC|newest]
Thread overview: 104+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-04 13:14 [RFC PATCH 00/30] Add PCIe support to TI's J721E SoC Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` [RFC PATCH 01/30] dt-bindings: PCI: cadence: Add DT binding to use PCIe with IOMMU Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` [RFC PATCH 02/30] dt-bindings: PCI: cadence: Add binding to reset PERST# Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` [RFC PATCH 03/30] dt-bindings: PCI: cadence: Update host DT bindings with TI specific compatible Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` [RFC PATCH 04/30] dt-bindings: PCI: cadence: Update EP " Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` [RFC PATCH 05/30] linux/kernel.h: Add PTR_ALIGN_DOWN macro Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` [RFC PATCH 06/30] PCI: cadence: Add support to use custom read and write accessors Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` [RFC PATCH 07/30] PCI: cadence: Add read and write accessors to perform only 32-bit accesses Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` [RFC PATCH 08/30] PCI: cadence: Add support to use PCIe in J721E SoC Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` [RFC PATCH 09/30] PCI: cadence: Add platform_data to start link and check link status Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` [RFC PATCH 10/30] PCI: cadence: Use *_start_link() and *_wait_for_link() to establish link Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` [RFC PATCH 11/30] PCI: cadence: Add support to drive PERST# line using GPIO Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` [RFC PATCH 12/30] PCI: cadence: Make "mem" an optional memory resource Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` [RFC PATCH 13/30] PCI: cadence: Use local management register to configure Vendor ID Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:14 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` [RFC PATCH 14/30] PCI: endpoint: Use notification chain mechanism to notify EPC events to EPF Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` [RFC PATCH 15/30] PCI: endpoint: Replace spinlock with mutex Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` [RFC PATCH 16/30] PCI: endpoint: Assign function number of each PF in EPC core Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` [RFC PATCH 17/30] PCI: endpoint: Protect concurrent access to pci_epf_ops with mutex Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` [RFC PATCH 18/30] PCI: endpoint: Add support to add virtual function in endpoint core Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` [RFC PATCH 19/30] PCI: endpoint: Add support to link a physical function to a virtual function Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` [RFC PATCH 20/30] PCI: endpoint: Add virtual function number in pci_epc ops Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` [RFC PATCH 21/30] PCI: cadence: Add support to configure virtual functions Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` [RFC PATCH 22/30] PCI: cadence: Configure pci_epc_features to align BAR addresses to 256 Bytes Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` [RFC PATCH 23/30] of/platform: Export of_platform_device_create_pdata() Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-10 17:43 ` Rob Herring
2019-06-10 17:43 ` Rob Herring
2019-06-10 17:43 ` Rob Herring
2019-06-11 4:38 ` Kishon Vijay Abraham I
2019-06-11 4:38 ` Kishon Vijay Abraham I
2019-06-11 4:38 ` Kishon Vijay Abraham I
2019-07-19 10:55 ` Kishon Vijay Abraham I
2019-07-19 10:55 ` Kishon Vijay Abraham I
2019-07-19 10:55 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` [RFC PATCH 24/30] dt-bindings: PCI: J721E: Add DT bindings for PCIe controller in J721E Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` [RFC PATCH 25/30] PCI: j721e: Add TI J721E PCIe driver Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` [RFC PATCH 26/30] MAINTAINERS: Add MAINTAINER entry for PCIe on TI's J721E SoC Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 19:45 ` Bjorn Helgaas
2019-06-04 19:45 ` Bjorn Helgaas
2019-06-04 13:15 ` [RFC PATCH 27/30] misc: pci_endpoint_test: Add J721E in pci_device_id table Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I [this message]
2019-06-04 13:15 ` [RFC PATCH 28/30] misc: pci_endpoint_test: Avoid using module parameter to determine irqtype Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` [RFC PATCH 29/30] misc: pci_endpoint_test: Populate sriov_configure ops to configure SRIOV device Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` [RFC PATCH 30/30] misc: pci_endpoint_test: Enable legacy interrupt Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
2019-06-04 13:15 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190604131516.13596-29-kishon@ti.com \
--to=kishon@ti.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=frowand.list@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=gustavo.pimentel@synopsys.com \
--cc=jingoohan1@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tjoseph@cadence.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.