From: Philippe Schenker <philippe.schenker@toradex.com> To: "Marcel Ziswiler" <marcel.ziswiler@toradex.com>, "Max Krummenacher" <max.krummenacher@toradex.com>, "stefan@agner.ch" <stefan@agner.ch>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, "Rob Herring" <robh+dt@kernel.org>, "Shawn Guo" <shawnguo@kernel.org>, "Mark Rutland" <mark.rutland@arm.com>, "Michal Vokáč" <michal.vokac@ysoft.com>, "Fabio Estevam" <festevam@gmail.com> Cc: Philippe Schenker <philippe.schenker@toradex.com>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>, Pengutronix Kernel Team <kernel@pengutronix.de>, NXP Linux Team <linux-imx@nxp.com>, Sascha Hauer <s.hauer@pengutronix.de> Subject: [PATCH v3 14/21] ARM: dts: imx6ull-colibri: Add sleep mode to fec Date: Wed, 7 Aug 2019 08:26:34 +0000 [thread overview] Message-ID: <20190807082556.5013-15-philippe.schenker@toradex.com> (raw) In-Reply-To: <20190807082556.5013-1-philippe.schenker@toradex.com> Do not change the clock as the power for this phy is switched with that clock. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> --- Changes in v3: None Changes in v2: None arch/arm/boot/dts/imx6ull-colibri.dtsi | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index d56728f03c35..1019ce69a242 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -62,8 +62,9 @@ }; &fec2 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_enet2>; + pinctrl-1 = <&pinctrl_enet2_sleep>; phy-mode = "rmii"; phy-handle = <ðphy1>; status = "okay"; @@ -220,6 +221,21 @@ >; }; + pinctrl_enet2_sleep: enet2sleepgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0 + MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0 + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x0 + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x0 + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x0 + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0 + MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x0 + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x0 + >; + }; + pinctrl_ecspi1_cs: ecspi1-cs-grp { fsl,pins = < MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x000a0 -- 2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: Philippe Schenker <philippe.schenker@toradex.com> To: "Marcel Ziswiler" <marcel.ziswiler@toradex.com>, "Max Krummenacher" <max.krummenacher@toradex.com>, "stefan@agner.ch" <stefan@agner.ch>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, "Rob Herring" <robh+dt@kernel.org>, "Shawn Guo" <shawnguo@kernel.org>, "Mark Rutland" <mark.rutland@arm.com>, "Michal Vokáč" <michal.vokac@ysoft.com>, "Fabio Estevam" <festevam@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>, Philippe Schenker <philippe.schenker@toradex.com>, NXP Linux Team <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Subject: [PATCH v3 14/21] ARM: dts: imx6ull-colibri: Add sleep mode to fec Date: Wed, 7 Aug 2019 08:26:34 +0000 [thread overview] Message-ID: <20190807082556.5013-15-philippe.schenker@toradex.com> (raw) In-Reply-To: <20190807082556.5013-1-philippe.schenker@toradex.com> Do not change the clock as the power for this phy is switched with that clock. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> --- Changes in v3: None Changes in v2: None arch/arm/boot/dts/imx6ull-colibri.dtsi | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index d56728f03c35..1019ce69a242 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -62,8 +62,9 @@ }; &fec2 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_enet2>; + pinctrl-1 = <&pinctrl_enet2_sleep>; phy-mode = "rmii"; phy-handle = <ðphy1>; status = "okay"; @@ -220,6 +221,21 @@ >; }; + pinctrl_enet2_sleep: enet2sleepgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0 + MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0 + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x0 + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x0 + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x0 + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0 + MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x0 + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x0 + >; + }; + pinctrl_ecspi1_cs: ecspi1-cs-grp { fsl,pins = < MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x000a0 -- 2.22.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-07 8:26 UTC|newest] Thread overview: 155+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-08-07 8:26 [PATCH v3 00/21] Common patches from downstream development Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` [PATCH v3 01/21] ARM: dts: imx7-colibri: make sure module supplies are always on Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` [PATCH v3 02/21] ARM: dts: imx7-colibri: disable HS400 Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 14:05 ` Marcel Ziswiler 2019-08-09 14:05 ` Marcel Ziswiler 2019-08-09 14:05 ` Marcel Ziswiler 2019-08-07 8:26 ` [PATCH v3 03/21] ARM: dts: imx7-colibri: prepare module device tree for FlexCAN Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 14:07 ` Marcel Ziswiler 2019-08-09 14:07 ` Marcel Ziswiler 2019-08-09 14:07 ` Marcel Ziswiler 2019-08-07 8:26 ` [PATCH v3 04/21] ARM: dts: imx7-colibri: Add sleep mode to ethernet Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 14:20 ` Marcel Ziswiler 2019-08-09 14:20 ` Marcel Ziswiler 2019-08-09 14:20 ` Marcel Ziswiler 2019-08-07 8:26 ` [PATCH v3 05/21] ARM: dts: add recovery for I2C for iMX7 Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 14:45 ` Marcel Ziswiler 2019-08-09 14:45 ` Marcel Ziswiler 2019-08-09 14:45 ` Marcel Ziswiler 2019-08-10 21:58 ` [PATCH] ARM: dts: imx7d: sbc-iot-imx7: add recovery for i2c3/4 André Draszik 2019-08-10 21:58 ` André Draszik 2019-08-12 8:50 ` Philippe Schenker 2019-08-12 8:50 ` Philippe Schenker 2019-08-12 9:15 ` [PATCH v3 05/21] ARM: dts: add recovery for I2C for iMX7 Michal Vokáč 2019-08-12 9:15 ` Michal Vokáč 2019-08-12 9:15 ` Michal Vokáč 2019-08-12 10:59 ` Philippe Schenker 2019-08-12 10:59 ` Philippe Schenker 2019-08-12 10:59 ` Philippe Schenker 2019-08-07 8:26 ` [PATCH v3 06/21] ARM: dts: imx7-colibri: add GPIO wakeup key Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 14:46 ` Marcel Ziswiler 2019-08-09 14:46 ` Marcel Ziswiler 2019-08-09 14:46 ` Marcel Ziswiler 2019-08-07 8:26 ` [PATCH v3 07/21] ARM: dts: imx7-colibri: fix 1.8V/UHS support Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 11:19 ` Fabio Estevam 2019-08-07 11:19 ` Fabio Estevam 2019-08-07 13:41 ` Philippe Schenker 2019-08-07 13:41 ` Philippe Schenker 2019-08-07 13:41 ` Philippe Schenker 2019-08-09 14:48 ` Marcel Ziswiler 2019-08-09 14:48 ` Marcel Ziswiler 2019-08-09 14:48 ` Marcel Ziswiler 2019-08-07 8:26 ` [PATCH v3 08/21] ARM: dts: imx7-colibri: Add touch controllers Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 14:56 ` Marcel Ziswiler 2019-08-09 14:56 ` Marcel Ziswiler 2019-08-09 14:56 ` Marcel Ziswiler 2019-08-07 8:26 ` [PATCH v3 09/21] ARM: dts: imx6qdl-colibri: add phy to fec Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 10:51 ` Uwe Kleine-König 2019-08-07 10:51 ` Uwe Kleine-König 2019-08-08 8:03 ` Philippe Schenker 2019-08-08 8:03 ` Philippe Schenker 2019-08-08 8:03 ` Philippe Schenker 2019-08-09 14:59 ` Marcel Ziswiler 2019-08-09 14:59 ` Marcel Ziswiler 2019-08-09 14:59 ` Marcel Ziswiler 2019-08-07 8:26 ` [PATCH v3 10/21] ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 15:00 ` Marcel Ziswiler 2019-08-09 15:00 ` Marcel Ziswiler 2019-08-09 15:00 ` Marcel Ziswiler 2019-08-07 8:26 ` [PATCH v3 11/21] ARM: dts: imx6qdl-apalis: Add sleep state to can interfaces Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 15:02 ` Marcel Ziswiler 2019-08-09 15:02 ` Marcel Ziswiler 2019-08-09 15:02 ` Marcel Ziswiler 2019-08-07 8:26 ` [PATCH v3 12/21] ARM: dts: imx6-apalis: Add touchscreens used on Toradex eval boards Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 15:35 ` Marcel Ziswiler 2019-08-09 15:35 ` Marcel Ziswiler 2019-08-09 15:35 ` Marcel Ziswiler 2019-08-07 8:26 ` [PATCH v3 13/21] ARM: dts: imx6-colibri: Add missing pinmuxing to Toradex eval board Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 15:36 ` Marcel Ziswiler 2019-08-09 15:36 ` Marcel Ziswiler 2019-08-09 15:36 ` Marcel Ziswiler 2019-08-07 8:26 ` Philippe Schenker [this message] 2019-08-07 8:26 ` [PATCH v3 14/21] ARM: dts: imx6ull-colibri: Add sleep mode to fec Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 15:38 ` Marcel Ziswiler 2019-08-09 15:38 ` Marcel Ziswiler 2019-08-09 15:38 ` Marcel Ziswiler 2019-08-07 8:26 ` [PATCH v3 15/21] ARM: dts: imx6ull-colibri: reduce v_batt current in power off Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 15:40 ` Marcel Ziswiler 2019-08-09 15:40 ` Marcel Ziswiler 2019-08-09 15:40 ` Marcel Ziswiler 2019-08-07 8:26 ` [PATCH v3 16/21] ARM: dts: imx6ull-colibri: Add watchdog Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 15:43 ` Marcel Ziswiler 2019-08-09 15:43 ` Marcel Ziswiler 2019-08-09 15:43 ` Marcel Ziswiler 2019-08-07 8:26 ` [PATCH v3 17/21] ARM: dts: imx6ull: improve can templates Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 15:47 ` Marcel Ziswiler 2019-08-09 15:47 ` Marcel Ziswiler 2019-08-09 15:47 ` Marcel Ziswiler 2019-08-12 8:54 ` Philippe Schenker 2019-08-12 8:54 ` Philippe Schenker 2019-08-12 8:54 ` Philippe Schenker 2019-08-07 8:26 ` [PATCH v3 18/21] ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 15:48 ` Marcel Ziswiler 2019-08-09 15:48 ` Marcel Ziswiler 2019-08-09 15:48 ` Marcel Ziswiler 2019-08-07 8:26 ` [PATCH v3 19/21] ARM: dts: imx6/7-colibri: switch dr_mode to otg Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 15:50 ` Marcel Ziswiler 2019-08-09 15:50 ` Marcel Ziswiler 2019-08-09 15:50 ` Marcel Ziswiler 2019-08-12 12:53 ` Philippe Schenker 2019-08-12 12:53 ` Philippe Schenker 2019-08-12 12:53 ` Philippe Schenker 2019-08-07 8:26 ` [PATCH v3 20/21] ARM: dts: imx6ull-colibri: Add touchscreen used with Eval Board Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 15:54 ` Marcel Ziswiler 2019-08-09 15:54 ` Marcel Ziswiler 2019-08-09 15:54 ` Marcel Ziswiler 2019-08-12 13:14 ` Philippe Schenker 2019-08-12 13:14 ` Philippe Schenker 2019-08-12 13:14 ` Philippe Schenker 2019-08-07 8:26 ` [PATCH v3 21/21] ARM: dts: imx7-colibri: Add UHS support to eval board Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-07 8:26 ` Philippe Schenker 2019-08-09 15:56 ` Marcel Ziswiler 2019-08-09 15:56 ` Marcel Ziswiler 2019-08-09 15:56 ` Marcel Ziswiler
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190807082556.5013-15-philippe.schenker@toradex.com \ --to=philippe.schenker@toradex.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=marcel.ziswiler@toradex.com \ --cc=mark.rutland@arm.com \ --cc=max.krummenacher@toradex.com \ --cc=michal.vokac@ysoft.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ --cc=stefan@agner.ch \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.