From: Philippe Schenker <philippe.schenker@toradex.com>
To: "Marcel Ziswiler" <marcel.ziswiler@toradex.com>,
"Max Krummenacher" <max.krummenacher@toradex.com>,
"stefan@agner.ch" <stefan@agner.ch>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Michal Vokáč" <michal.vokac@ysoft.com>,
"Fabio Estevam" <festevam@gmail.com>
Cc: Philippe Schenker <philippe.schenker@toradex.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
NXP Linux Team <linux-imx@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>
Subject: [PATCH v3 19/21] ARM: dts: imx6/7-colibri: switch dr_mode to otg
Date: Wed, 7 Aug 2019 08:26:44 +0000 [thread overview]
Message-ID: <20190807082556.5013-20-philippe.schenker@toradex.com> (raw)
In-Reply-To: <20190807082556.5013-1-philippe.schenker@toradex.com>
In order for the otg ports, that these modules support, it is needed
that dr_mode is on otg. Switch to use that feature.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 2 +-
arch/arm/boot/dts/imx7-colibri.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 9a63debab0b5..6674198346d2 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -388,7 +388,7 @@
&usbotg {
pinctrl-names = "default";
disable-over-current;
- dr_mode = "peripheral";
+ dr_mode = "otg";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 67f5e0c87fdc..42478f1aa146 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -320,7 +320,7 @@
};
&usbotg1 {
- dr_mode = "host";
+ dr_mode = "otg";
};
&usdhc1 {
--
2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: Philippe Schenker <philippe.schenker@toradex.com>
To: "Marcel Ziswiler" <marcel.ziswiler@toradex.com>,
"Max Krummenacher" <max.krummenacher@toradex.com>,
"stefan@agner.ch" <stefan@agner.ch>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Michal Vokáč" <michal.vokac@ysoft.com>,
"Fabio Estevam" <festevam@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Philippe Schenker <philippe.schenker@toradex.com>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v3 19/21] ARM: dts: imx6/7-colibri: switch dr_mode to otg
Date: Wed, 7 Aug 2019 08:26:44 +0000 [thread overview]
Message-ID: <20190807082556.5013-20-philippe.schenker@toradex.com> (raw)
In-Reply-To: <20190807082556.5013-1-philippe.schenker@toradex.com>
In order for the otg ports, that these modules support, it is needed
that dr_mode is on otg. Switch to use that feature.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 2 +-
arch/arm/boot/dts/imx7-colibri.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 9a63debab0b5..6674198346d2 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -388,7 +388,7 @@
&usbotg {
pinctrl-names = "default";
disable-over-current;
- dr_mode = "peripheral";
+ dr_mode = "otg";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 67f5e0c87fdc..42478f1aa146 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -320,7 +320,7 @@
};
&usbotg1 {
- dr_mode = "host";
+ dr_mode = "otg";
};
&usdhc1 {
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-07 8:27 UTC|newest]
Thread overview: 155+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-07 8:26 [PATCH v3 00/21] Common patches from downstream development Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` [PATCH v3 01/21] ARM: dts: imx7-colibri: make sure module supplies are always on Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` [PATCH v3 02/21] ARM: dts: imx7-colibri: disable HS400 Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 14:05 ` Marcel Ziswiler
2019-08-09 14:05 ` Marcel Ziswiler
2019-08-09 14:05 ` Marcel Ziswiler
2019-08-07 8:26 ` [PATCH v3 03/21] ARM: dts: imx7-colibri: prepare module device tree for FlexCAN Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 14:07 ` Marcel Ziswiler
2019-08-09 14:07 ` Marcel Ziswiler
2019-08-09 14:07 ` Marcel Ziswiler
2019-08-07 8:26 ` [PATCH v3 04/21] ARM: dts: imx7-colibri: Add sleep mode to ethernet Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 14:20 ` Marcel Ziswiler
2019-08-09 14:20 ` Marcel Ziswiler
2019-08-09 14:20 ` Marcel Ziswiler
2019-08-07 8:26 ` [PATCH v3 05/21] ARM: dts: add recovery for I2C for iMX7 Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 14:45 ` Marcel Ziswiler
2019-08-09 14:45 ` Marcel Ziswiler
2019-08-09 14:45 ` Marcel Ziswiler
2019-08-10 21:58 ` [PATCH] ARM: dts: imx7d: sbc-iot-imx7: add recovery for i2c3/4 André Draszik
2019-08-10 21:58 ` André Draszik
2019-08-12 8:50 ` Philippe Schenker
2019-08-12 8:50 ` Philippe Schenker
2019-08-12 9:15 ` [PATCH v3 05/21] ARM: dts: add recovery for I2C for iMX7 Michal Vokáč
2019-08-12 9:15 ` Michal Vokáč
2019-08-12 9:15 ` Michal Vokáč
2019-08-12 10:59 ` Philippe Schenker
2019-08-12 10:59 ` Philippe Schenker
2019-08-12 10:59 ` Philippe Schenker
2019-08-07 8:26 ` [PATCH v3 06/21] ARM: dts: imx7-colibri: add GPIO wakeup key Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 14:46 ` Marcel Ziswiler
2019-08-09 14:46 ` Marcel Ziswiler
2019-08-09 14:46 ` Marcel Ziswiler
2019-08-07 8:26 ` [PATCH v3 07/21] ARM: dts: imx7-colibri: fix 1.8V/UHS support Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 11:19 ` Fabio Estevam
2019-08-07 11:19 ` Fabio Estevam
2019-08-07 13:41 ` Philippe Schenker
2019-08-07 13:41 ` Philippe Schenker
2019-08-07 13:41 ` Philippe Schenker
2019-08-09 14:48 ` Marcel Ziswiler
2019-08-09 14:48 ` Marcel Ziswiler
2019-08-09 14:48 ` Marcel Ziswiler
2019-08-07 8:26 ` [PATCH v3 08/21] ARM: dts: imx7-colibri: Add touch controllers Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 14:56 ` Marcel Ziswiler
2019-08-09 14:56 ` Marcel Ziswiler
2019-08-09 14:56 ` Marcel Ziswiler
2019-08-07 8:26 ` [PATCH v3 09/21] ARM: dts: imx6qdl-colibri: add phy to fec Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 10:51 ` Uwe Kleine-König
2019-08-07 10:51 ` Uwe Kleine-König
2019-08-08 8:03 ` Philippe Schenker
2019-08-08 8:03 ` Philippe Schenker
2019-08-08 8:03 ` Philippe Schenker
2019-08-09 14:59 ` Marcel Ziswiler
2019-08-09 14:59 ` Marcel Ziswiler
2019-08-09 14:59 ` Marcel Ziswiler
2019-08-07 8:26 ` [PATCH v3 10/21] ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 15:00 ` Marcel Ziswiler
2019-08-09 15:00 ` Marcel Ziswiler
2019-08-09 15:00 ` Marcel Ziswiler
2019-08-07 8:26 ` [PATCH v3 11/21] ARM: dts: imx6qdl-apalis: Add sleep state to can interfaces Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 15:02 ` Marcel Ziswiler
2019-08-09 15:02 ` Marcel Ziswiler
2019-08-09 15:02 ` Marcel Ziswiler
2019-08-07 8:26 ` [PATCH v3 12/21] ARM: dts: imx6-apalis: Add touchscreens used on Toradex eval boards Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 15:35 ` Marcel Ziswiler
2019-08-09 15:35 ` Marcel Ziswiler
2019-08-09 15:35 ` Marcel Ziswiler
2019-08-07 8:26 ` [PATCH v3 13/21] ARM: dts: imx6-colibri: Add missing pinmuxing to Toradex eval board Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 15:36 ` Marcel Ziswiler
2019-08-09 15:36 ` Marcel Ziswiler
2019-08-09 15:36 ` Marcel Ziswiler
2019-08-07 8:26 ` [PATCH v3 14/21] ARM: dts: imx6ull-colibri: Add sleep mode to fec Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 15:38 ` Marcel Ziswiler
2019-08-09 15:38 ` Marcel Ziswiler
2019-08-09 15:38 ` Marcel Ziswiler
2019-08-07 8:26 ` [PATCH v3 15/21] ARM: dts: imx6ull-colibri: reduce v_batt current in power off Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 15:40 ` Marcel Ziswiler
2019-08-09 15:40 ` Marcel Ziswiler
2019-08-09 15:40 ` Marcel Ziswiler
2019-08-07 8:26 ` [PATCH v3 16/21] ARM: dts: imx6ull-colibri: Add watchdog Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 15:43 ` Marcel Ziswiler
2019-08-09 15:43 ` Marcel Ziswiler
2019-08-09 15:43 ` Marcel Ziswiler
2019-08-07 8:26 ` [PATCH v3 17/21] ARM: dts: imx6ull: improve can templates Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 15:47 ` Marcel Ziswiler
2019-08-09 15:47 ` Marcel Ziswiler
2019-08-09 15:47 ` Marcel Ziswiler
2019-08-12 8:54 ` Philippe Schenker
2019-08-12 8:54 ` Philippe Schenker
2019-08-12 8:54 ` Philippe Schenker
2019-08-07 8:26 ` [PATCH v3 18/21] ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 15:48 ` Marcel Ziswiler
2019-08-09 15:48 ` Marcel Ziswiler
2019-08-09 15:48 ` Marcel Ziswiler
2019-08-07 8:26 ` Philippe Schenker [this message]
2019-08-07 8:26 ` [PATCH v3 19/21] ARM: dts: imx6/7-colibri: switch dr_mode to otg Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 15:50 ` Marcel Ziswiler
2019-08-09 15:50 ` Marcel Ziswiler
2019-08-09 15:50 ` Marcel Ziswiler
2019-08-12 12:53 ` Philippe Schenker
2019-08-12 12:53 ` Philippe Schenker
2019-08-12 12:53 ` Philippe Schenker
2019-08-07 8:26 ` [PATCH v3 20/21] ARM: dts: imx6ull-colibri: Add touchscreen used with Eval Board Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 15:54 ` Marcel Ziswiler
2019-08-09 15:54 ` Marcel Ziswiler
2019-08-09 15:54 ` Marcel Ziswiler
2019-08-12 13:14 ` Philippe Schenker
2019-08-12 13:14 ` Philippe Schenker
2019-08-12 13:14 ` Philippe Schenker
2019-08-07 8:26 ` [PATCH v3 21/21] ARM: dts: imx7-colibri: Add UHS support to eval board Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-07 8:26 ` Philippe Schenker
2019-08-09 15:56 ` Marcel Ziswiler
2019-08-09 15:56 ` Marcel Ziswiler
2019-08-09 15:56 ` Marcel Ziswiler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190807082556.5013-20-philippe.schenker@toradex.com \
--to=philippe.schenker@toradex.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=mark.rutland@arm.com \
--cc=max.krummenacher@toradex.com \
--cc=michal.vokac@ysoft.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.