From: Arnd Bergmann <arnd@arndb.de>
To: Tony Lindgren <tony@atomide.com>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Paul Walmsley <paul@pwsan.com>, Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Alan Stern <stern@rowland.harvard.edu>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Linus Walleij <linus.walleij@linaro.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Arnd Bergmann <arnd@arndb.de>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [PATCH 05/22] ARM: omap1: move mach/usb.h to include/linux/soc
Date: Thu, 8 Aug 2019 23:22:14 +0200 [thread overview]
Message-ID: <20190808212234.2213262-6-arnd@arndb.de> (raw)
In-Reply-To: <20190808212234.2213262-1-arnd@arndb.de>
The register definitions in this header are used in at least four
different places, with little hope of completely cleaning that up.
Split up the file into a portion that becomes a linux-wide header
under include/linux/soc/ti/, and the parts that are actually only
needed by board files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-omap1/board-ams-delta.c | 2 +-
arch/arm/mach-omap1/board-generic.c | 2 +-
arch/arm/mach-omap1/board-h2.c | 2 +-
arch/arm/mach-omap1/board-h3.c | 2 +-
arch/arm/mach-omap1/board-htcherald.c | 2 +-
arch/arm/mach-omap1/board-innovator.c | 2 +-
arch/arm/mach-omap1/board-nokia770.c | 2 +-
arch/arm/mach-omap1/board-osk.c | 2 +-
arch/arm/mach-omap1/board-palmte.c | 2 +-
arch/arm/mach-omap1/board-palmtt.c | 2 +-
arch/arm/mach-omap1/board-palmz71.c | 2 +-
arch/arm/mach-omap1/board-sx1.c | 2 +-
arch/arm/mach-omap1/clock_data.c | 2 +-
arch/arm/mach-omap1/usb.c | 2 +-
arch/arm/mach-omap1/usb.h | 25 +++++++++++++++++
drivers/usb/gadget/udc/omap_udc.c | 3 +-
drivers/usb/host/ohci-omap.c | 4 +--
drivers/usb/phy/phy-isp1301-omap.c | 2 +-
.../usb.h => include/linux/soc/ti/omap1-usb.h | 28 ++++++-------------
19 files changed, 52 insertions(+), 38 deletions(-)
create mode 100644 arch/arm/mach-omap1/usb.h
rename arch/arm/mach-omap1/include/mach/usb.h => include/linux/soc/ti/omap1-usb.h (86%)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index e47a6fbcfd6e..2d63db557792 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -39,7 +39,7 @@
#include <mach/hardware.h>
#include "camera.h"
-#include <mach/usb.h>
+#include "usb.h"
#include "ams-delta-fiq.h"
#include "board-ams-delta.h"
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c62554990115..8ef0a9b17e92 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -21,7 +21,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index cb7ce627ffe8..92a31727a069 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -41,7 +41,7 @@
#include "flash.h"
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4249984f9c30..86260498c344 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -45,7 +45,7 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 258304edf23e..f7220b60eb61 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -31,7 +31,7 @@
#include "mmc.h"
#include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 653af63320a8..f169e172421d 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -34,7 +34,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "iomap.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 11511ae2e0a2..e43c852103f5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -31,7 +31,7 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 3be7b3b580d3..99ebe4503787 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -51,7 +51,7 @@
#include <mach/tc.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index ce6f0fcd9d12..4ac981c5cf74 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -38,7 +38,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "mmc.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8a08311c4e05..e48ae5fbe1b1 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -38,7 +38,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 034e5bc6a029..37db0ab31528 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -40,7 +40,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index bb9ec345e204..0965b1b689ec 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -38,7 +38,7 @@
#include "board-sx1.h"
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 3ebcd96efbff..ef46c5f67cf9 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -22,7 +22,7 @@
#include "soc.h"
#include <mach/hardware.h>
-#include <mach/usb.h> /* for OTG_BASE */
+#include "usb.h" /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 740c876ae46b..a9deda073822 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -16,7 +16,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/usb.h b/arch/arm/mach-omap1/usb.h
new file mode 100644
index 000000000000..08c9344c46e3
--- /dev/null
+++ b/arch/arm/mach-omap1/usb.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * fixme correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+#define is_usb0_device(config) 1
+#else
+#define is_usb0_device(config) 0
+#endif
+
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#define OMAP1_OHCI_BASE 0xfffba000
+#define OMAP2_OHCI_BASE 0x4805e000
+#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index f36f0730afab..721c9c3fe5a7 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -40,8 +40,9 @@
#include <asm/mach-types.h>
#include <linux/omap-dma.h>
+#include <linux/platform_data/usb-omap1.h>
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
#include "omap_udc.h"
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index e92ef3231f2c..841563fba20d 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -25,6 +25,8 @@
#include <linux/module.h>
#include <linux/usb/otg.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
#include <linux/signal.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
@@ -37,8 +39,6 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
-
#define DRIVER_DESC "OHCI OMAP driver"
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 7041ba030052..18cf87dcc21f 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -25,7 +25,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
#undef VERBOSE
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/include/linux/soc/ti/omap1-usb.h
similarity index 86%
rename from arch/arm/mach-omap1/include/mach/usb.h
rename to include/linux/soc/ti/omap1-usb.h
index 5429d86c7190..67488698601a 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/include/linux/soc/ti/omap1-usb.h
@@ -1,34 +1,20 @@
/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SOC_TI_OMAP1_USB
+#define __SOC_TI_OMAP1_USB
/*
- * FIXME correct answer depends on hmc_mode,
- * as does (on omap1) any nonzero value for config->otg port number
+ * Constants in this file are used all over the place, in platform
+ * code, as well as the udc, phy and ohci drivers.
+ * This is not a great design, but unlikely to get fixed after
+ * such a long time. Don't do this elsewhere.
*/
-#if IS_ENABLED(CONFIG_USB_OMAP)
-#define is_usb0_device(config) 1
-#else
-#define is_usb0_device(config) 0
-#endif
-
-#include <linux/platform_data/usb-omap1.h>
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-void omap1_usb_init(struct omap_usb_config *pdata);
-#else
-static inline void omap1_usb_init(struct omap_usb_config *pdata)
-{
-}
-#endif
#define OMAP1_OTG_BASE 0xfffb0400
#define OMAP1_UDC_BASE 0xfffb4000
-#define OMAP1_OHCI_BASE 0xfffba000
-#define OMAP2_OHCI_BASE 0x4805e000
#define OMAP2_UDC_BASE 0x4805e200
#define OMAP2_OTG_BASE 0x4805e300
#define OTG_BASE OMAP1_OTG_BASE
#define UDC_BASE OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
/*
* OTG and transceiver registers, for OMAPs starting with ARM926
@@ -126,3 +112,5 @@ static inline void omap1_usb_init(struct omap_usb_config *pdata)
# define CONF_USB0_ISOLATE_R (1 << 3)
# define CONF_USB_PWRDN_DM_R (1 << 2)
# define CONF_USB_PWRDN_DP_R (1 << 1)
+
+#endif
--
2.20.0
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de>
To: Tony Lindgren <tony@atomide.com>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Paul Walmsley <paul@pwsan.com>, Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Alan Stern <stern@rowland.harvard.edu>
Cc: Arnd Bergmann <arnd@arndb.de>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Linus Walleij <linus.walleij@linaro.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/22] ARM: omap1: move mach/usb.h to include/linux/soc
Date: Thu, 8 Aug 2019 23:22:14 +0200 [thread overview]
Message-ID: <20190808212234.2213262-6-arnd@arndb.de> (raw)
In-Reply-To: <20190808212234.2213262-1-arnd@arndb.de>
The register definitions in this header are used in at least four
different places, with little hope of completely cleaning that up.
Split up the file into a portion that becomes a linux-wide header
under include/linux/soc/ti/, and the parts that are actually only
needed by board files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-omap1/board-ams-delta.c | 2 +-
arch/arm/mach-omap1/board-generic.c | 2 +-
arch/arm/mach-omap1/board-h2.c | 2 +-
arch/arm/mach-omap1/board-h3.c | 2 +-
arch/arm/mach-omap1/board-htcherald.c | 2 +-
arch/arm/mach-omap1/board-innovator.c | 2 +-
arch/arm/mach-omap1/board-nokia770.c | 2 +-
arch/arm/mach-omap1/board-osk.c | 2 +-
arch/arm/mach-omap1/board-palmte.c | 2 +-
arch/arm/mach-omap1/board-palmtt.c | 2 +-
arch/arm/mach-omap1/board-palmz71.c | 2 +-
arch/arm/mach-omap1/board-sx1.c | 2 +-
arch/arm/mach-omap1/clock_data.c | 2 +-
arch/arm/mach-omap1/usb.c | 2 +-
arch/arm/mach-omap1/usb.h | 25 +++++++++++++++++
drivers/usb/gadget/udc/omap_udc.c | 3 +-
drivers/usb/host/ohci-omap.c | 4 +--
drivers/usb/phy/phy-isp1301-omap.c | 2 +-
.../usb.h => include/linux/soc/ti/omap1-usb.h | 28 ++++++-------------
19 files changed, 52 insertions(+), 38 deletions(-)
create mode 100644 arch/arm/mach-omap1/usb.h
rename arch/arm/mach-omap1/include/mach/usb.h => include/linux/soc/ti/omap1-usb.h (86%)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index e47a6fbcfd6e..2d63db557792 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -39,7 +39,7 @@
#include <mach/hardware.h>
#include "camera.h"
-#include <mach/usb.h>
+#include "usb.h"
#include "ams-delta-fiq.h"
#include "board-ams-delta.h"
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c62554990115..8ef0a9b17e92 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -21,7 +21,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index cb7ce627ffe8..92a31727a069 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -41,7 +41,7 @@
#include "flash.h"
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4249984f9c30..86260498c344 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -45,7 +45,7 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 258304edf23e..f7220b60eb61 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -31,7 +31,7 @@
#include "mmc.h"
#include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 653af63320a8..f169e172421d 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -34,7 +34,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "iomap.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 11511ae2e0a2..e43c852103f5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -31,7 +31,7 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 3be7b3b580d3..99ebe4503787 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -51,7 +51,7 @@
#include <mach/tc.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index ce6f0fcd9d12..4ac981c5cf74 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -38,7 +38,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "mmc.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8a08311c4e05..e48ae5fbe1b1 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -38,7 +38,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 034e5bc6a029..37db0ab31528 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -40,7 +40,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index bb9ec345e204..0965b1b689ec 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -38,7 +38,7 @@
#include "board-sx1.h"
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 3ebcd96efbff..ef46c5f67cf9 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -22,7 +22,7 @@
#include "soc.h"
#include <mach/hardware.h>
-#include <mach/usb.h> /* for OTG_BASE */
+#include "usb.h" /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 740c876ae46b..a9deda073822 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -16,7 +16,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/usb.h b/arch/arm/mach-omap1/usb.h
new file mode 100644
index 000000000000..08c9344c46e3
--- /dev/null
+++ b/arch/arm/mach-omap1/usb.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * fixme correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+#define is_usb0_device(config) 1
+#else
+#define is_usb0_device(config) 0
+#endif
+
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#define OMAP1_OHCI_BASE 0xfffba000
+#define OMAP2_OHCI_BASE 0x4805e000
+#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index f36f0730afab..721c9c3fe5a7 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -40,8 +40,9 @@
#include <asm/mach-types.h>
#include <linux/omap-dma.h>
+#include <linux/platform_data/usb-omap1.h>
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
#include "omap_udc.h"
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index e92ef3231f2c..841563fba20d 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -25,6 +25,8 @@
#include <linux/module.h>
#include <linux/usb/otg.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
#include <linux/signal.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
@@ -37,8 +39,6 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
-
#define DRIVER_DESC "OHCI OMAP driver"
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 7041ba030052..18cf87dcc21f 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -25,7 +25,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
#undef VERBOSE
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/include/linux/soc/ti/omap1-usb.h
similarity index 86%
rename from arch/arm/mach-omap1/include/mach/usb.h
rename to include/linux/soc/ti/omap1-usb.h
index 5429d86c7190..67488698601a 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/include/linux/soc/ti/omap1-usb.h
@@ -1,34 +1,20 @@
/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SOC_TI_OMAP1_USB
+#define __SOC_TI_OMAP1_USB
/*
- * FIXME correct answer depends on hmc_mode,
- * as does (on omap1) any nonzero value for config->otg port number
+ * Constants in this file are used all over the place, in platform
+ * code, as well as the udc, phy and ohci drivers.
+ * This is not a great design, but unlikely to get fixed after
+ * such a long time. Don't do this elsewhere.
*/
-#if IS_ENABLED(CONFIG_USB_OMAP)
-#define is_usb0_device(config) 1
-#else
-#define is_usb0_device(config) 0
-#endif
-
-#include <linux/platform_data/usb-omap1.h>
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-void omap1_usb_init(struct omap_usb_config *pdata);
-#else
-static inline void omap1_usb_init(struct omap_usb_config *pdata)
-{
-}
-#endif
#define OMAP1_OTG_BASE 0xfffb0400
#define OMAP1_UDC_BASE 0xfffb4000
-#define OMAP1_OHCI_BASE 0xfffba000
-#define OMAP2_OHCI_BASE 0x4805e000
#define OMAP2_UDC_BASE 0x4805e200
#define OMAP2_OTG_BASE 0x4805e300
#define OTG_BASE OMAP1_OTG_BASE
#define UDC_BASE OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
/*
* OTG and transceiver registers, for OMAPs starting with ARM926
@@ -126,3 +112,5 @@ static inline void omap1_usb_init(struct omap_usb_config *pdata)
# define CONF_USB0_ISOLATE_R (1 << 3)
# define CONF_USB_PWRDN_DM_R (1 << 2)
# define CONF_USB_PWRDN_DP_R (1 << 1)
+
+#endif
--
2.20.0
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de>
To: Tony Lindgren <tony@atomide.com>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Paul Walmsley <paul@pwsan.com>, Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Alan Stern <stern@rowland.harvard.edu>
Cc: Arnd Bergmann <arnd@arndb.de>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Linus Walleij <linus.walleij@linaro.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/22] ARM: omap1: move mach/usb.h to include/linux/soc
Date: Thu, 8 Aug 2019 23:22:14 +0200 [thread overview]
Message-ID: <20190808212234.2213262-6-arnd@arndb.de> (raw)
In-Reply-To: <20190808212234.2213262-1-arnd@arndb.de>
The register definitions in this header are used in at least four
different places, with little hope of completely cleaning that up.
Split up the file into a portion that becomes a linux-wide header
under include/linux/soc/ti/, and the parts that are actually only
needed by board files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-omap1/board-ams-delta.c | 2 +-
arch/arm/mach-omap1/board-generic.c | 2 +-
arch/arm/mach-omap1/board-h2.c | 2 +-
arch/arm/mach-omap1/board-h3.c | 2 +-
arch/arm/mach-omap1/board-htcherald.c | 2 +-
arch/arm/mach-omap1/board-innovator.c | 2 +-
arch/arm/mach-omap1/board-nokia770.c | 2 +-
arch/arm/mach-omap1/board-osk.c | 2 +-
arch/arm/mach-omap1/board-palmte.c | 2 +-
arch/arm/mach-omap1/board-palmtt.c | 2 +-
arch/arm/mach-omap1/board-palmz71.c | 2 +-
arch/arm/mach-omap1/board-sx1.c | 2 +-
arch/arm/mach-omap1/clock_data.c | 2 +-
arch/arm/mach-omap1/usb.c | 2 +-
arch/arm/mach-omap1/usb.h | 25 +++++++++++++++++
drivers/usb/gadget/udc/omap_udc.c | 3 +-
drivers/usb/host/ohci-omap.c | 4 +--
drivers/usb/phy/phy-isp1301-omap.c | 2 +-
.../usb.h => include/linux/soc/ti/omap1-usb.h | 28 ++++++-------------
19 files changed, 52 insertions(+), 38 deletions(-)
create mode 100644 arch/arm/mach-omap1/usb.h
rename arch/arm/mach-omap1/include/mach/usb.h => include/linux/soc/ti/omap1-usb.h (86%)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index e47a6fbcfd6e..2d63db557792 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -39,7 +39,7 @@
#include <mach/hardware.h>
#include "camera.h"
-#include <mach/usb.h>
+#include "usb.h"
#include "ams-delta-fiq.h"
#include "board-ams-delta.h"
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c62554990115..8ef0a9b17e92 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -21,7 +21,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index cb7ce627ffe8..92a31727a069 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -41,7 +41,7 @@
#include "flash.h"
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4249984f9c30..86260498c344 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -45,7 +45,7 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 258304edf23e..f7220b60eb61 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -31,7 +31,7 @@
#include "mmc.h"
#include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 653af63320a8..f169e172421d 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -34,7 +34,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "iomap.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 11511ae2e0a2..e43c852103f5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -31,7 +31,7 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 3be7b3b580d3..99ebe4503787 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -51,7 +51,7 @@
#include <mach/tc.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index ce6f0fcd9d12..4ac981c5cf74 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -38,7 +38,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "mmc.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8a08311c4e05..e48ae5fbe1b1 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -38,7 +38,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 034e5bc6a029..37db0ab31528 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -40,7 +40,7 @@
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index bb9ec345e204..0965b1b689ec 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -38,7 +38,7 @@
#include "board-sx1.h"
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 3ebcd96efbff..ef46c5f67cf9 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -22,7 +22,7 @@
#include "soc.h"
#include <mach/hardware.h>
-#include <mach/usb.h> /* for OTG_BASE */
+#include "usb.h" /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 740c876ae46b..a9deda073822 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -16,7 +16,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include "usb.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/usb.h b/arch/arm/mach-omap1/usb.h
new file mode 100644
index 000000000000..08c9344c46e3
--- /dev/null
+++ b/arch/arm/mach-omap1/usb.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * fixme correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+#define is_usb0_device(config) 1
+#else
+#define is_usb0_device(config) 0
+#endif
+
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#define OMAP1_OHCI_BASE 0xfffba000
+#define OMAP2_OHCI_BASE 0x4805e000
+#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index f36f0730afab..721c9c3fe5a7 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -40,8 +40,9 @@
#include <asm/mach-types.h>
#include <linux/omap-dma.h>
+#include <linux/platform_data/usb-omap1.h>
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
#include "omap_udc.h"
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index e92ef3231f2c..841563fba20d 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -25,6 +25,8 @@
#include <linux/module.h>
#include <linux/usb/otg.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
#include <linux/signal.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
@@ -37,8 +39,6 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
-
#define DRIVER_DESC "OHCI OMAP driver"
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 7041ba030052..18cf87dcc21f 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -25,7 +25,7 @@
#include <mach/mux.h>
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
#undef VERBOSE
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/include/linux/soc/ti/omap1-usb.h
similarity index 86%
rename from arch/arm/mach-omap1/include/mach/usb.h
rename to include/linux/soc/ti/omap1-usb.h
index 5429d86c7190..67488698601a 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/include/linux/soc/ti/omap1-usb.h
@@ -1,34 +1,20 @@
/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SOC_TI_OMAP1_USB
+#define __SOC_TI_OMAP1_USB
/*
- * FIXME correct answer depends on hmc_mode,
- * as does (on omap1) any nonzero value for config->otg port number
+ * Constants in this file are used all over the place, in platform
+ * code, as well as the udc, phy and ohci drivers.
+ * This is not a great design, but unlikely to get fixed after
+ * such a long time. Don't do this elsewhere.
*/
-#if IS_ENABLED(CONFIG_USB_OMAP)
-#define is_usb0_device(config) 1
-#else
-#define is_usb0_device(config) 0
-#endif
-
-#include <linux/platform_data/usb-omap1.h>
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-void omap1_usb_init(struct omap_usb_config *pdata);
-#else
-static inline void omap1_usb_init(struct omap_usb_config *pdata)
-{
-}
-#endif
#define OMAP1_OTG_BASE 0xfffb0400
#define OMAP1_UDC_BASE 0xfffb4000
-#define OMAP1_OHCI_BASE 0xfffba000
-#define OMAP2_OHCI_BASE 0x4805e000
#define OMAP2_UDC_BASE 0x4805e200
#define OMAP2_OTG_BASE 0x4805e300
#define OTG_BASE OMAP1_OTG_BASE
#define UDC_BASE OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
/*
* OTG and transceiver registers, for OMAPs starting with ARM926
@@ -126,3 +112,5 @@ static inline void omap1_usb_init(struct omap_usb_config *pdata)
# define CONF_USB0_ISOLATE_R (1 << 3)
# define CONF_USB_PWRDN_DM_R (1 << 2)
# define CONF_USB_PWRDN_DP_R (1 << 1)
+
+#endif
--
2.20.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-08 21:27 UTC|newest]
Thread overview: 138+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-08 21:22 [PATCH 00/22] ARM: omap1 multiplatform support Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` [PATCH 01/22] ARM: omap1: innovator: pass lcd control address as pdata Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-09 11:29 ` Bartlomiej Zolnierkiewicz
2019-08-09 11:29 ` Bartlomiej Zolnierkiewicz
2019-08-09 11:29 ` Bartlomiej Zolnierkiewicz
2019-08-08 21:22 ` [PATCH 02/22] ARM: omap1: make omapfb standalone compilable Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-09 11:32 ` Bartlomiej Zolnierkiewicz
2019-08-09 11:32 ` Bartlomiej Zolnierkiewicz
2019-08-09 11:43 ` Arnd Bergmann
2019-08-09 11:43 ` Arnd Bergmann
2019-08-09 14:36 ` Bartlomiej Zolnierkiewicz
2019-08-09 14:36 ` Bartlomiej Zolnierkiewicz
2019-08-09 19:55 ` Arnd Bergmann
2019-08-09 19:55 ` Arnd Bergmann
2019-08-12 9:21 ` Bartlomiej Zolnierkiewicz
2019-08-12 9:21 ` Bartlomiej Zolnierkiewicz
2019-08-08 21:22 ` [PATCH 03/22] ARM: omap1: move omap15xx local bus handling to usb.c Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-09 5:32 ` Felipe Balbi
2019-08-09 5:32 ` Felipe Balbi
2019-08-09 5:32 ` Felipe Balbi
2019-08-10 10:28 ` Christoph Hellwig
2019-08-10 10:28 ` Christoph Hellwig
2019-08-10 10:28 ` Christoph Hellwig
2019-08-08 21:22 ` [PATCH 04/22] ARM: omap1: move ohci phy power handling to board files Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann [this message]
2019-08-08 21:22 ` [PATCH 05/22] ARM: omap1: move mach/usb.h to include/linux/soc Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` [PATCH 06/22] ARM: omap1: move some headers " Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` [PATCH 07/22] ARM: omap1: move perseus spi pinconf to board file Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 22:24 ` Mark Brown
2019-08-08 22:24 ` Mark Brown
2019-08-09 11:29 ` Arnd Bergmann
2019-08-09 11:29 ` Arnd Bergmann
2019-08-09 12:01 ` Mark Brown
2019-08-09 12:01 ` Mark Brown
2019-08-08 21:22 ` [PATCH 08/22] ARM: omap1: move CF chipselect setup " Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` [PATCH 09/22] fbdev: omap: avoid using mach/*.h files Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-09 11:34 ` Bartlomiej Zolnierkiewicz
2019-08-09 11:34 ` Bartlomiej Zolnierkiewicz
2019-08-09 11:34 ` Bartlomiej Zolnierkiewicz
2019-08-08 21:22 ` [PATCH 10/22] usb: omap: avoid mach/*.h headers Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-09 5:38 ` Greg Kroah-Hartman
2019-08-09 5:38 ` Greg Kroah-Hartman
2019-08-08 21:22 ` [PATCH 11/22] clocksource: ti-dmtimer: avoid using mach/hardware.h Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-09 7:01 ` Daniel Lezcano
2019-08-09 7:01 ` Daniel Lezcano
2019-08-09 7:33 ` Arnd Bergmann
2019-08-09 7:33 ` Arnd Bergmann
2019-08-09 7:57 ` Daniel Lezcano
2019-08-09 7:57 ` Daniel Lezcano
2019-08-08 21:22 ` [PATCH 12/22] serial: 8250/omap1: include linux/soc/ti/omap1-soc.h Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` [PATCH 13/22] input: omap: void using mach/*.h headers Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:42 ` Dmitry Torokhov
2019-08-08 21:42 ` Dmitry Torokhov
2019-08-08 21:46 ` Arnd Bergmann
2019-08-08 21:46 ` Arnd Bergmann
2019-08-08 21:46 ` Arnd Bergmann
2019-08-08 22:19 ` Dmitry Torokhov
2019-08-08 22:19 ` Dmitry Torokhov
2019-08-08 23:39 ` Sebastian Reichel
2019-08-08 23:39 ` Sebastian Reichel
2019-08-09 11:23 ` Arnd Bergmann
2019-08-09 11:23 ` Arnd Bergmann
2019-08-08 21:22 ` [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-13 10:36 ` Tony Lindgren
2019-08-13 10:36 ` Tony Lindgren
2019-08-13 11:02 ` Arnd Bergmann
2019-08-13 11:02 ` Arnd Bergmann
2019-08-13 18:11 ` Aaro Koskinen
2019-08-13 18:11 ` Aaro Koskinen
2019-08-13 18:11 ` Aaro Koskinen
2019-08-13 19:33 ` Arnd Bergmann
2019-08-13 19:33 ` Arnd Bergmann
2019-08-14 7:49 ` Tony Lindgren
2019-08-14 7:49 ` Tony Lindgren
2019-08-14 10:36 ` Arnd Bergmann
2019-08-14 10:36 ` Arnd Bergmann
2019-08-14 13:40 ` Tony Lindgren
2019-08-14 13:40 ` Tony Lindgren
2019-08-16 8:34 ` Aaro Koskinen
2019-08-16 8:34 ` Aaro Koskinen
2019-08-27 16:33 ` Arnd Bergmann
2019-08-27 16:33 ` Arnd Bergmann
2019-08-27 19:04 ` Aaro Koskinen
2019-08-27 19:04 ` Aaro Koskinen
2019-08-28 13:02 ` Arnd Bergmann
2019-08-28 13:02 ` Arnd Bergmann
2019-08-28 18:23 ` Aaro Koskinen
2019-08-28 18:23 ` Aaro Koskinen
2019-08-28 18:45 ` Tony Lindgren
2019-08-28 18:45 ` Tony Lindgren
2019-08-08 21:41 ` [PATCH 15/22] ARM: omap1: move mach/*.h into mach directory Arnd Bergmann
2019-08-08 21:41 ` Arnd Bergmann
2019-08-08 21:41 ` Arnd Bergmann
2019-08-08 21:41 ` [PATCH 16/22] ARM: omap1: move clk support into a single file Arnd Bergmann
2019-08-08 21:41 ` Arnd Bergmann
2019-08-08 21:41 ` Arnd Bergmann
2019-08-08 21:41 ` [PATCH 17/22] ARM: omap1: remove some dead clock code Arnd Bergmann
2019-08-08 21:41 ` Arnd Bergmann
2019-08-08 21:41 ` [PATCH 18/22] ARM: omap1: clk: rework 'struct clk' Arnd Bergmann
2019-08-08 21:41 ` Arnd Bergmann
2019-08-08 21:41 ` [PATCH 19/22] ARM: omap1: clk: use common_clk-like callbacks Arnd Bergmann
2019-08-08 21:41 ` Arnd Bergmann
2019-08-08 21:43 ` [PATCH 20/22] ARM: omap1: clk: use clk_init_data Arnd Bergmann
2019-08-08 21:43 ` Arnd Bergmann
2019-08-08 21:43 ` [PATCH 21/22] ARM: omap1: use common clk framework Arnd Bergmann
2019-08-08 21:43 ` Arnd Bergmann
2019-08-14 21:10 ` Aaro Koskinen
2019-08-14 21:10 ` Aaro Koskinen
2019-08-15 7:10 ` Arnd Bergmann
2019-08-15 7:10 ` Arnd Bergmann
2019-08-08 21:47 ` [PATCH 22/22] ARM: omap1: enable multiplatform Arnd Bergmann
2019-08-08 21:47 ` Arnd Bergmann
2019-08-08 21:47 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190808212234.2213262-6-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=aaro.koskinen@iki.fi \
--cc=b.zolnierkie@samsung.com \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=stern@rowland.harvard.edu \
--cc=tomi.valkeinen@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.