From: Arnd Bergmann <arnd@arndb.de>
To: Tony Lindgren <tony@atomide.com>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Mark Brown <broonie@kernel.org>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Linus Walleij <linus.walleij@linaro.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Arnd Bergmann <arnd@arndb.de>,
Boris Brezillon <bbrezillon@kernel.org>,
linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org
Subject: [PATCH 07/22] ARM: omap1: move perseus spi pinconf to board file
Date: Thu, 8 Aug 2019 23:22:16 +0200 [thread overview]
Message-ID: <20190808212234.2213262-8-arnd@arndb.de> (raw)
In-Reply-To: <20190808212234.2213262-1-arnd@arndb.de>
The driver has always had a FIXME about this, and it seems
like this trivial code move avoids a mach header inclusion,
so just do it.
With that out of the way, and the header file inclusions
changed to global files, the driver can also be compile-tested
on other platforms.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-omap1/board-perseus2.c | 6 ++++++
drivers/spi/Kconfig | 2 +-
drivers/spi/spi-omap-uwire.c | 15 +++------------
3 files changed, 10 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 1aeeb7337d29..da0155107d85 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -289,6 +289,12 @@ static void __init omap_perseus2_init(void)
omap_cfg_reg(F4_7XX_KBC3);
omap_cfg_reg(E3_7XX_KBC4);
+ if (IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)) {
+ /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
+ int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000;
+ omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9);
+ }
+
platform_add_devices(devices, ARRAY_SIZE(devices));
omap_serial_init();
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 949b18ed9d6b..4e67c155229e 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -464,7 +464,7 @@ config SPI_OCTEON
config SPI_OMAP_UWIRE
tristate "OMAP1 MicroWire"
- depends on ARCH_OMAP1
+ depends on ARCH_OMAP1 || (ARM && COMPILE_TEST)
select SPI_BITBANG
help
This hooks up to the MicroWire controller on OMAP1 chips.
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index ce8dbdbce312..278d42a2ec49 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -44,13 +44,10 @@
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
-
-#include <mach/mux.h>
-
-#include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */
-
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-mux.h>
/* FIXME address is now a platform device resource,
* and irqs should show there too...
@@ -541,12 +538,6 @@ static int __init omap_uwire_init(void)
omap_cfg_reg(N14_1610_UWIRE_CS0);
omap_cfg_reg(N15_1610_UWIRE_CS1);
}
- if (machine_is_omap_perseus2()) {
- /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
- int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000;
- omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9);
- }
-
return platform_driver_register(&uwire_driver);
}
--
2.20.0
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de>
To: Tony Lindgren <tony@atomide.com>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Linus Walleij <linus.walleij@linaro.org>,
Boris Brezillon <bbrezillon@kernel.org>,
linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/22] ARM: omap1: move perseus spi pinconf to board file
Date: Thu, 8 Aug 2019 23:22:16 +0200 [thread overview]
Message-ID: <20190808212234.2213262-8-arnd@arndb.de> (raw)
In-Reply-To: <20190808212234.2213262-1-arnd@arndb.de>
The driver has always had a FIXME about this, and it seems
like this trivial code move avoids a mach header inclusion,
so just do it.
With that out of the way, and the header file inclusions
changed to global files, the driver can also be compile-tested
on other platforms.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-omap1/board-perseus2.c | 6 ++++++
drivers/spi/Kconfig | 2 +-
drivers/spi/spi-omap-uwire.c | 15 +++------------
3 files changed, 10 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 1aeeb7337d29..da0155107d85 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -289,6 +289,12 @@ static void __init omap_perseus2_init(void)
omap_cfg_reg(F4_7XX_KBC3);
omap_cfg_reg(E3_7XX_KBC4);
+ if (IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)) {
+ /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
+ int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000;
+ omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9);
+ }
+
platform_add_devices(devices, ARRAY_SIZE(devices));
omap_serial_init();
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 949b18ed9d6b..4e67c155229e 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -464,7 +464,7 @@ config SPI_OCTEON
config SPI_OMAP_UWIRE
tristate "OMAP1 MicroWire"
- depends on ARCH_OMAP1
+ depends on ARCH_OMAP1 || (ARM && COMPILE_TEST)
select SPI_BITBANG
help
This hooks up to the MicroWire controller on OMAP1 chips.
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index ce8dbdbce312..278d42a2ec49 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -44,13 +44,10 @@
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
-
-#include <mach/mux.h>
-
-#include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */
-
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-mux.h>
/* FIXME address is now a platform device resource,
* and irqs should show there too...
@@ -541,12 +538,6 @@ static int __init omap_uwire_init(void)
omap_cfg_reg(N14_1610_UWIRE_CS0);
omap_cfg_reg(N15_1610_UWIRE_CS1);
}
- if (machine_is_omap_perseus2()) {
- /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
- int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000;
- omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9);
- }
-
return platform_driver_register(&uwire_driver);
}
--
2.20.0
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de>
To: Tony Lindgren <tony@atomide.com>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Linus Walleij <linus.walleij@linaro.org>,
Boris Brezillon <bbrezillon@kernel.org>,
linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/22] ARM: omap1: move perseus spi pinconf to board file
Date: Thu, 8 Aug 2019 23:22:16 +0200 [thread overview]
Message-ID: <20190808212234.2213262-8-arnd@arndb.de> (raw)
In-Reply-To: <20190808212234.2213262-1-arnd@arndb.de>
The driver has always had a FIXME about this, and it seems
like this trivial code move avoids a mach header inclusion,
so just do it.
With that out of the way, and the header file inclusions
changed to global files, the driver can also be compile-tested
on other platforms.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-omap1/board-perseus2.c | 6 ++++++
drivers/spi/Kconfig | 2 +-
drivers/spi/spi-omap-uwire.c | 15 +++------------
3 files changed, 10 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 1aeeb7337d29..da0155107d85 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -289,6 +289,12 @@ static void __init omap_perseus2_init(void)
omap_cfg_reg(F4_7XX_KBC3);
omap_cfg_reg(E3_7XX_KBC4);
+ if (IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)) {
+ /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
+ int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000;
+ omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9);
+ }
+
platform_add_devices(devices, ARRAY_SIZE(devices));
omap_serial_init();
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 949b18ed9d6b..4e67c155229e 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -464,7 +464,7 @@ config SPI_OCTEON
config SPI_OMAP_UWIRE
tristate "OMAP1 MicroWire"
- depends on ARCH_OMAP1
+ depends on ARCH_OMAP1 || (ARM && COMPILE_TEST)
select SPI_BITBANG
help
This hooks up to the MicroWire controller on OMAP1 chips.
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index ce8dbdbce312..278d42a2ec49 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -44,13 +44,10 @@
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
-
-#include <mach/mux.h>
-
-#include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */
-
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-mux.h>
/* FIXME address is now a platform device resource,
* and irqs should show there too...
@@ -541,12 +538,6 @@ static int __init omap_uwire_init(void)
omap_cfg_reg(N14_1610_UWIRE_CS0);
omap_cfg_reg(N15_1610_UWIRE_CS1);
}
- if (machine_is_omap_perseus2()) {
- /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
- int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000;
- omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9);
- }
-
return platform_driver_register(&uwire_driver);
}
--
2.20.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-08 21:29 UTC|newest]
Thread overview: 138+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-08 21:22 [PATCH 00/22] ARM: omap1 multiplatform support Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` [PATCH 01/22] ARM: omap1: innovator: pass lcd control address as pdata Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-09 11:29 ` Bartlomiej Zolnierkiewicz
2019-08-09 11:29 ` Bartlomiej Zolnierkiewicz
2019-08-09 11:29 ` Bartlomiej Zolnierkiewicz
2019-08-08 21:22 ` [PATCH 02/22] ARM: omap1: make omapfb standalone compilable Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-09 11:32 ` Bartlomiej Zolnierkiewicz
2019-08-09 11:32 ` Bartlomiej Zolnierkiewicz
2019-08-09 11:43 ` Arnd Bergmann
2019-08-09 11:43 ` Arnd Bergmann
2019-08-09 14:36 ` Bartlomiej Zolnierkiewicz
2019-08-09 14:36 ` Bartlomiej Zolnierkiewicz
2019-08-09 19:55 ` Arnd Bergmann
2019-08-09 19:55 ` Arnd Bergmann
2019-08-12 9:21 ` Bartlomiej Zolnierkiewicz
2019-08-12 9:21 ` Bartlomiej Zolnierkiewicz
2019-08-08 21:22 ` [PATCH 03/22] ARM: omap1: move omap15xx local bus handling to usb.c Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-09 5:32 ` Felipe Balbi
2019-08-09 5:32 ` Felipe Balbi
2019-08-09 5:32 ` Felipe Balbi
2019-08-10 10:28 ` Christoph Hellwig
2019-08-10 10:28 ` Christoph Hellwig
2019-08-10 10:28 ` Christoph Hellwig
2019-08-08 21:22 ` [PATCH 04/22] ARM: omap1: move ohci phy power handling to board files Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` [PATCH 05/22] ARM: omap1: move mach/usb.h to include/linux/soc Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` [PATCH 06/22] ARM: omap1: move some headers " Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann [this message]
2019-08-08 21:22 ` [PATCH 07/22] ARM: omap1: move perseus spi pinconf to board file Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 22:24 ` Mark Brown
2019-08-08 22:24 ` Mark Brown
2019-08-09 11:29 ` Arnd Bergmann
2019-08-09 11:29 ` Arnd Bergmann
2019-08-09 12:01 ` Mark Brown
2019-08-09 12:01 ` Mark Brown
2019-08-08 21:22 ` [PATCH 08/22] ARM: omap1: move CF chipselect setup " Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` [PATCH 09/22] fbdev: omap: avoid using mach/*.h files Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-09 11:34 ` Bartlomiej Zolnierkiewicz
2019-08-09 11:34 ` Bartlomiej Zolnierkiewicz
2019-08-09 11:34 ` Bartlomiej Zolnierkiewicz
2019-08-08 21:22 ` [PATCH 10/22] usb: omap: avoid mach/*.h headers Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-09 5:38 ` Greg Kroah-Hartman
2019-08-09 5:38 ` Greg Kroah-Hartman
2019-08-08 21:22 ` [PATCH 11/22] clocksource: ti-dmtimer: avoid using mach/hardware.h Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-09 7:01 ` Daniel Lezcano
2019-08-09 7:01 ` Daniel Lezcano
2019-08-09 7:33 ` Arnd Bergmann
2019-08-09 7:33 ` Arnd Bergmann
2019-08-09 7:57 ` Daniel Lezcano
2019-08-09 7:57 ` Daniel Lezcano
2019-08-08 21:22 ` [PATCH 12/22] serial: 8250/omap1: include linux/soc/ti/omap1-soc.h Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:22 ` [PATCH 13/22] input: omap: void using mach/*.h headers Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-08 21:42 ` Dmitry Torokhov
2019-08-08 21:42 ` Dmitry Torokhov
2019-08-08 21:46 ` Arnd Bergmann
2019-08-08 21:46 ` Arnd Bergmann
2019-08-08 21:46 ` Arnd Bergmann
2019-08-08 22:19 ` Dmitry Torokhov
2019-08-08 22:19 ` Dmitry Torokhov
2019-08-08 23:39 ` Sebastian Reichel
2019-08-08 23:39 ` Sebastian Reichel
2019-08-09 11:23 ` Arnd Bergmann
2019-08-09 11:23 ` Arnd Bergmann
2019-08-08 21:22 ` [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf Arnd Bergmann
2019-08-08 21:22 ` Arnd Bergmann
2019-08-13 10:36 ` Tony Lindgren
2019-08-13 10:36 ` Tony Lindgren
2019-08-13 11:02 ` Arnd Bergmann
2019-08-13 11:02 ` Arnd Bergmann
2019-08-13 18:11 ` Aaro Koskinen
2019-08-13 18:11 ` Aaro Koskinen
2019-08-13 18:11 ` Aaro Koskinen
2019-08-13 19:33 ` Arnd Bergmann
2019-08-13 19:33 ` Arnd Bergmann
2019-08-14 7:49 ` Tony Lindgren
2019-08-14 7:49 ` Tony Lindgren
2019-08-14 10:36 ` Arnd Bergmann
2019-08-14 10:36 ` Arnd Bergmann
2019-08-14 13:40 ` Tony Lindgren
2019-08-14 13:40 ` Tony Lindgren
2019-08-16 8:34 ` Aaro Koskinen
2019-08-16 8:34 ` Aaro Koskinen
2019-08-27 16:33 ` Arnd Bergmann
2019-08-27 16:33 ` Arnd Bergmann
2019-08-27 19:04 ` Aaro Koskinen
2019-08-27 19:04 ` Aaro Koskinen
2019-08-28 13:02 ` Arnd Bergmann
2019-08-28 13:02 ` Arnd Bergmann
2019-08-28 18:23 ` Aaro Koskinen
2019-08-28 18:23 ` Aaro Koskinen
2019-08-28 18:45 ` Tony Lindgren
2019-08-28 18:45 ` Tony Lindgren
2019-08-08 21:41 ` [PATCH 15/22] ARM: omap1: move mach/*.h into mach directory Arnd Bergmann
2019-08-08 21:41 ` Arnd Bergmann
2019-08-08 21:41 ` Arnd Bergmann
2019-08-08 21:41 ` [PATCH 16/22] ARM: omap1: move clk support into a single file Arnd Bergmann
2019-08-08 21:41 ` Arnd Bergmann
2019-08-08 21:41 ` Arnd Bergmann
2019-08-08 21:41 ` [PATCH 17/22] ARM: omap1: remove some dead clock code Arnd Bergmann
2019-08-08 21:41 ` Arnd Bergmann
2019-08-08 21:41 ` [PATCH 18/22] ARM: omap1: clk: rework 'struct clk' Arnd Bergmann
2019-08-08 21:41 ` Arnd Bergmann
2019-08-08 21:41 ` [PATCH 19/22] ARM: omap1: clk: use common_clk-like callbacks Arnd Bergmann
2019-08-08 21:41 ` Arnd Bergmann
2019-08-08 21:43 ` [PATCH 20/22] ARM: omap1: clk: use clk_init_data Arnd Bergmann
2019-08-08 21:43 ` Arnd Bergmann
2019-08-08 21:43 ` [PATCH 21/22] ARM: omap1: use common clk framework Arnd Bergmann
2019-08-08 21:43 ` Arnd Bergmann
2019-08-14 21:10 ` Aaro Koskinen
2019-08-14 21:10 ` Aaro Koskinen
2019-08-15 7:10 ` Arnd Bergmann
2019-08-15 7:10 ` Arnd Bergmann
2019-08-08 21:47 ` [PATCH 22/22] ARM: omap1: enable multiplatform Arnd Bergmann
2019-08-08 21:47 ` Arnd Bergmann
2019-08-08 21:47 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190808212234.2213262-8-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=aaro.koskinen@iki.fi \
--cc=b.zolnierkie@samsung.com \
--cc=bbrezillon@kernel.org \
--cc=broonie@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.