From: Tony Lindgren <tony@atomide.com> To: linux-omap@vger.kernel.org Cc: "Andrew F . Davis" <afd@ti.com>, Santosh Shilimkar <ssantosh@kernel.org>, Suman Anna <s-anna@ti.com>, Tero Kristo <t-kristo@ti.com>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Rob Herring <robh@kernel.org>, devicetree@vger.kernel.org Subject: [PATCH 5/6] ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data Date: Wed, 20 May 2020 14:13:33 -0700 [thread overview] Message-ID: <20200520211334.61814-6-tony@atomide.com> (raw) In-Reply-To: <20200520211334.61814-1-tony@atomide.com> We can power off the SGX power domain when not in use when we configure it for genpd. And with that change, we can now also drop the old unused legacy platform data. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/am33xx.dtsi | 2 + arch/arm/boot/dts/am4372.dtsi | 2 + .../omap_hwmod_33xx_43xx_interconnect_data.c | 16 -------- .../omap_hwmod_33xx_43xx_ipblock_data.c | 40 ------------------- arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 2 - arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 2 - 6 files changed, 4 insertions(+), 60 deletions(-) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -577,6 +577,7 @@ target-module@56000000 { <SYSC_IDLE_SMART>; clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>; clock-names = "fck"; + power-domains = <&prm_gfx>; resets = <&prm_gfx 0>; reset-names = "rstctrl"; #address-cells = <1>; @@ -616,6 +617,7 @@ prm_device: prm@f00 { prm_gfx: prm@1100 { compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; reg = <0x1100 0x100>; + #power-domain-cells = <0>; #reset-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -516,6 +516,7 @@ target-module@56000000 { <SYSC_IDLE_SMART>; clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>; clock-names = "fck"; + power-domains = <&prm_gfx>; resets = <&prm_gfx 0>; reset-names = "rstctrl"; #address-cells = <1>; @@ -532,6 +533,7 @@ &prcm { prm_gfx: prm@400 { compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; reg = <0x400 0x100>; + #power-domain-cells = <0>; #reset-cells = <1>; }; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -74,22 +74,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* gfx -> l3 main */ -struct omap_hwmod_ocp_if am33xx_gfx__l3_main = { - .master = &am33xx_gfx_hwmod, - .slave = &am33xx_l3_main_hwmod, - .clk = "dpll_core_m4_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3 main -> gfx */ -struct omap_hwmod_ocp_if am33xx_l3_main__gfx = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_gfx_hwmod, - .clk = "dpll_core_m4_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4 wkup -> rtc */ struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = { .master = &am33xx_l4_wkup_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -133,30 +133,6 @@ struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = { .name = "wkup_m3", }; -/* gfx */ -/* Pseudo hwmod for reset control purpose only */ -static struct omap_hwmod_class am33xx_gfx_hwmod_class = { - .name = "gfx", -}; - -static struct omap_hwmod_rst_info am33xx_gfx_resets[] = { - { .name = "gfx", .rst_shift = 0, .st_shift = 0}, -}; - -struct omap_hwmod am33xx_gfx_hwmod = { - .name = "gfx", - .class = &am33xx_gfx_hwmod_class, - .clkdm_name = "gfx_l3_clkdm", - .main_clk = "gfx_fck_div_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .rst_lines = am33xx_gfx_resets, - .rst_lines_cnt = ARRAY_SIZE(am33xx_gfx_resets), -}; - /* * 'prcm' class * power and reset manager (whole prcm infrastructure) @@ -379,22 +355,14 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_wkup_hwmod, AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_main_hwmod, AM33XX_CM_PER_L3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gfx_hwmod, AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET); CLKCTRL(am33xx_mpu_hwmod , AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_instr_hwmod , AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET); CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); } -static void omap_hwmod_am33xx_rst(void) -{ - RSTCTRL(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTCTRL_OFFSET); - RSTST(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTST_OFFSET); -} - void omap_hwmod_am33xx_reg(void) { omap_hwmod_am33xx_clkctrl(); - omap_hwmod_am33xx_rst(); } static void omap_hwmod_am43xx_clkctrl(void) @@ -410,20 +378,12 @@ static void omap_hwmod_am43xx_clkctrl(void) CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_wkup_hwmod, AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_main_hwmod, AM43XX_CM_PER_L3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gfx_hwmod, AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET); CLKCTRL(am33xx_mpu_hwmod , AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_instr_hwmod , AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET); CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); } -static void omap_hwmod_am43xx_rst(void) -{ - RSTCTRL(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTCTRL_OFFSET); - RSTST(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTST_OFFSET); -} - void omap_hwmod_am43xx_reg(void) { omap_hwmod_am43xx_clkctrl(); - omap_hwmod_am43xx_rst(); } diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -282,10 +282,8 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__l4_hs, &am33xx_l3_main__l3_s, &am33xx_l3_main__l3_instr, - &am33xx_l3_main__gfx, &am33xx_l3_s__l3_main, &am33xx_wkup_m3__l4_wkup, - &am33xx_gfx__l3_main, &am33xx_l3_main__debugss, &am33xx_l4_wkup__wkup_m3, &am33xx_l4_wkup__control, diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -243,11 +243,9 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l3_main__l4_hs, &am33xx_l3_main__l3_s, &am33xx_l3_main__l3_instr, - &am33xx_l3_main__gfx, &am33xx_l3_s__l3_main, &am43xx_l3_main__emif, &am43xx_wkup_m3__l4_wkup, - &am33xx_gfx__l3_main, &am43xx_l4_wkup__wkup_m3, &am43xx_l4_wkup__control, &am43xx_l4_wkup__smartreflex0, -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Tony Lindgren <tony@atomide.com> To: linux-omap@vger.kernel.org Cc: Rob Herring <robh@kernel.org>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, "Andrew F . Davis" <afd@ti.com>, Tero Kristo <t-kristo@ti.com>, Santosh Shilimkar <ssantosh@kernel.org>, Suman Anna <s-anna@ti.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 5/6] ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data Date: Wed, 20 May 2020 14:13:33 -0700 [thread overview] Message-ID: <20200520211334.61814-6-tony@atomide.com> (raw) In-Reply-To: <20200520211334.61814-1-tony@atomide.com> We can power off the SGX power domain when not in use when we configure it for genpd. And with that change, we can now also drop the old unused legacy platform data. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/am33xx.dtsi | 2 + arch/arm/boot/dts/am4372.dtsi | 2 + .../omap_hwmod_33xx_43xx_interconnect_data.c | 16 -------- .../omap_hwmod_33xx_43xx_ipblock_data.c | 40 ------------------- arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 2 - arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 2 - 6 files changed, 4 insertions(+), 60 deletions(-) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -577,6 +577,7 @@ target-module@56000000 { <SYSC_IDLE_SMART>; clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>; clock-names = "fck"; + power-domains = <&prm_gfx>; resets = <&prm_gfx 0>; reset-names = "rstctrl"; #address-cells = <1>; @@ -616,6 +617,7 @@ prm_device: prm@f00 { prm_gfx: prm@1100 { compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; reg = <0x1100 0x100>; + #power-domain-cells = <0>; #reset-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -516,6 +516,7 @@ target-module@56000000 { <SYSC_IDLE_SMART>; clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>; clock-names = "fck"; + power-domains = <&prm_gfx>; resets = <&prm_gfx 0>; reset-names = "rstctrl"; #address-cells = <1>; @@ -532,6 +533,7 @@ &prcm { prm_gfx: prm@400 { compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; reg = <0x400 0x100>; + #power-domain-cells = <0>; #reset-cells = <1>; }; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -74,22 +74,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* gfx -> l3 main */ -struct omap_hwmod_ocp_if am33xx_gfx__l3_main = { - .master = &am33xx_gfx_hwmod, - .slave = &am33xx_l3_main_hwmod, - .clk = "dpll_core_m4_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3 main -> gfx */ -struct omap_hwmod_ocp_if am33xx_l3_main__gfx = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_gfx_hwmod, - .clk = "dpll_core_m4_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4 wkup -> rtc */ struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = { .master = &am33xx_l4_wkup_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -133,30 +133,6 @@ struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = { .name = "wkup_m3", }; -/* gfx */ -/* Pseudo hwmod for reset control purpose only */ -static struct omap_hwmod_class am33xx_gfx_hwmod_class = { - .name = "gfx", -}; - -static struct omap_hwmod_rst_info am33xx_gfx_resets[] = { - { .name = "gfx", .rst_shift = 0, .st_shift = 0}, -}; - -struct omap_hwmod am33xx_gfx_hwmod = { - .name = "gfx", - .class = &am33xx_gfx_hwmod_class, - .clkdm_name = "gfx_l3_clkdm", - .main_clk = "gfx_fck_div_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .rst_lines = am33xx_gfx_resets, - .rst_lines_cnt = ARRAY_SIZE(am33xx_gfx_resets), -}; - /* * 'prcm' class * power and reset manager (whole prcm infrastructure) @@ -379,22 +355,14 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_wkup_hwmod, AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_main_hwmod, AM33XX_CM_PER_L3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gfx_hwmod, AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET); CLKCTRL(am33xx_mpu_hwmod , AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_instr_hwmod , AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET); CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); } -static void omap_hwmod_am33xx_rst(void) -{ - RSTCTRL(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTCTRL_OFFSET); - RSTST(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTST_OFFSET); -} - void omap_hwmod_am33xx_reg(void) { omap_hwmod_am33xx_clkctrl(); - omap_hwmod_am33xx_rst(); } static void omap_hwmod_am43xx_clkctrl(void) @@ -410,20 +378,12 @@ static void omap_hwmod_am43xx_clkctrl(void) CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_wkup_hwmod, AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_main_hwmod, AM43XX_CM_PER_L3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gfx_hwmod, AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET); CLKCTRL(am33xx_mpu_hwmod , AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_instr_hwmod , AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET); CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); } -static void omap_hwmod_am43xx_rst(void) -{ - RSTCTRL(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTCTRL_OFFSET); - RSTST(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTST_OFFSET); -} - void omap_hwmod_am43xx_reg(void) { omap_hwmod_am43xx_clkctrl(); - omap_hwmod_am43xx_rst(); } diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -282,10 +282,8 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__l4_hs, &am33xx_l3_main__l3_s, &am33xx_l3_main__l3_instr, - &am33xx_l3_main__gfx, &am33xx_l3_s__l3_main, &am33xx_wkup_m3__l4_wkup, - &am33xx_gfx__l3_main, &am33xx_l3_main__debugss, &am33xx_l4_wkup__wkup_m3, &am33xx_l4_wkup__control, diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -243,11 +243,9 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l3_main__l4_hs, &am33xx_l3_main__l3_s, &am33xx_l3_main__l3_instr, - &am33xx_l3_main__gfx, &am33xx_l3_s__l3_main, &am43xx_l3_main__emif, &am43xx_wkup_m3__l4_wkup, - &am33xx_gfx__l3_main, &am43xx_l4_wkup__wkup_m3, &am43xx_l4_wkup__control, &am43xx_l4_wkup__smartreflex0, -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-20 21:13 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-20 21:13 [PATCHv2 0/6] Add initial genpd support for omap PRM driver Tony Lindgren 2020-05-20 21:13 ` Tony Lindgren 2020-05-20 21:13 ` [PATCH 1/6] dt-bindings: omap: Update PRM binding for genpd Tony Lindgren 2020-05-20 21:13 ` Tony Lindgren 2020-05-28 22:20 ` Rob Herring 2020-05-28 22:20 ` Rob Herring 2020-05-20 21:13 ` [PATCH 2/6] soc: ti: omap-prm: Add basic power domain support Tony Lindgren 2020-05-20 21:13 ` Tony Lindgren 2020-05-21 4:53 ` kbuild test robot 2020-05-21 4:53 ` kbuild test robot 2020-05-21 4:53 ` kbuild test robot 2020-05-20 21:13 ` [PATCH 3/6] soc: ti: omap-prm: Configure sgx power domain for am3 and am4 Tony Lindgren 2020-05-20 21:13 ` Tony Lindgren 2020-05-20 21:13 ` [PATCH 4/6] soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domain Tony Lindgren 2020-05-20 21:13 ` Tony Lindgren 2020-05-20 21:13 ` Tony Lindgren [this message] 2020-05-20 21:13 ` [PATCH 5/6] ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data Tony Lindgren 2020-05-20 21:13 ` [PATCH 6/6] ARM: dts: Configure omap4 and 5 l4_abe " Tony Lindgren 2020-05-20 21:13 ` Tony Lindgren -- strict thread matches above, loose matches on Subject: below -- 2020-07-02 15:45 [PATCHv4 0/6] Add initial genpd support for omap PRM driver Tony Lindgren 2020-07-02 15:45 ` [PATCH 5/6] ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data Tony Lindgren 2020-07-02 15:45 ` Tony Lindgren 2020-06-22 16:46 [PATCHv3 0/6] Add initial genpd support for omap PRM driver Tony Lindgren 2020-06-22 16:46 ` [PATCH 5/6] ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data Tony Lindgren 2020-05-12 20:38 [PATCH 0/6] Add initial genpd support for omap PRM driver Tony Lindgren 2020-05-12 20:38 ` [PATCH 5/6] ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data Tony Lindgren 2020-05-12 20:38 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200520211334.61814-6-tony@atomide.com \ --to=tony@atomide.com \ --cc=afd@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=robh@kernel.org \ --cc=s-anna@ti.com \ --cc=ssantosh@kernel.org \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.