From: Tony Lindgren <tony@atomide.com> To: linux-omap@vger.kernel.org Cc: "Andrew F . Davis" <afd@ti.com>, Santosh Shilimkar <ssantosh@kernel.org>, Suman Anna <s-anna@ti.com>, Tero Kristo <t-kristo@ti.com>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Rob Herring <robh@kernel.org>, devicetree@vger.kernel.org Subject: [PATCH 6/6] ARM: dts: Configure omap4 and 5 l4_abe for genpd and drop platform data Date: Wed, 20 May 2020 14:13:34 -0700 [thread overview] Message-ID: <20200520211334.61814-7-tony@atomide.com> (raw) In-Reply-To: <20200520211334.61814-1-tony@atomide.com> We can power off l4_abe domain when not in use when we configure it for genpd. And with that change, we can now also drop the old unused legacy platform data. Note that we also need to now use "simple-pm-bus" instead of "simple-bus" for PM runtime to get enabled for the bus. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/omap4-l4-abe.dtsi | 6 ++-- arch/arm/boot/dts/omap4.dtsi | 6 ++++ arch/arm/boot/dts/omap5-l4-abe.dtsi | 6 ++-- arch/arm/boot/dts/omap5.dtsi | 6 ++++ arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 33 ---------------------- arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 31 -------------------- 6 files changed, 20 insertions(+), 68 deletions(-) diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi --- a/arch/arm/boot/dts/omap4-l4-abe.dtsi +++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi @@ -1,14 +1,16 @@ &l4_abe { /* 0x40100000 */ - compatible = "ti,omap4-l4-abe", "simple-bus"; + compatible = "ti,omap4-l4-abe", "simple-pm-bus"; reg = <0x40100000 0x400>, <0x40100400 0x400>; reg-names = "la", "ap"; + power-domains = <&prm_abe>; + /* OMAP4_L4_ABE_CLKCTRL is read-only */ #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */ <0x49000000 0x49000000 0x100000>; segment@0 { /* 0x40100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -637,6 +637,12 @@ prm_tesla: prm@400 { #reset-cells = <1>; }; + prm_abe: prm@500 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x500 0x100>; + #power-domain-cells = <0>; + }; + prm_core: prm@700 { compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; reg = <0x700 0x100>; diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi --- a/arch/arm/boot/dts/omap5-l4-abe.dtsi +++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi @@ -1,14 +1,16 @@ &l4_abe { /* 0x40100000 */ - compatible = "ti,omap5-l4-abe", "simple-bus"; + compatible = "ti,omap5-l4-abe", "simple-pm-bus"; reg = <0x40100000 0x400>, <0x40100400 0x400>; reg-names = "la", "ap"; + power-domains = <&prm_abe>; + /* OMAP5_L4_ABE_CLKCTRL is read-only */ #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */ <0x49000000 0x49000000 0x100000>; segment@0 { /* 0x40100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -563,6 +563,12 @@ prm_dsp: prm@400 { #reset-cells = <1>; }; + prm_abe: prm@500 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x500 0x100>; + #power-domain-cells = <0>; + }; + prm_core: prm@700 { compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; reg = <0x700 0x100>; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -124,21 +124,6 @@ static struct omap_hwmod_class omap44xx_l4_hwmod_class = { .name = "l4", }; -/* l4_abe */ -static struct omap_hwmod omap44xx_l4_abe_hwmod = { - .name = "l4_abe", - .class = &omap44xx_l4_hwmod_class, - .clkdm_name = "abe_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_ABE_AESS_CONTEXT_OFFSET, - .lostcontext_mask = OMAP4430_LOSTMEM_AESSMEM_MASK, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - /* l4_cfg */ static struct omap_hwmod omap44xx_l4_cfg_hwmod = { .name = "l4_cfg", @@ -1007,22 +992,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_1 -> l4_abe */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = { - .master = &omap44xx_l3_main_1_hwmod, - .slave = &omap44xx_l4_abe_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> l4_abe */ -static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_l4_abe_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_1 -> l4_cfg */ static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = { .master = &omap44xx_l3_main_1_hwmod, @@ -1266,8 +1235,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l3_main_1__l3_main_3, &omap44xx_l3_main_2__l3_main_3, &omap44xx_l4_cfg__l3_main_3, - &omap44xx_l3_main_1__l4_abe, - &omap44xx_mpu__l4_abe, &omap44xx_l3_main_1__l4_cfg, &omap44xx_l3_main_2__l4_per, &omap44xx_l4_cfg__l4_wkup, diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -121,19 +121,6 @@ static struct omap_hwmod_class omap54xx_l4_hwmod_class = { .name = "l4", }; -/* l4_abe */ -static struct omap_hwmod omap54xx_l4_abe_hwmod = { - .name = "l4_abe", - .class = &omap54xx_l4_hwmod_class, - .clkdm_name = "abe_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_ABE_L4_ABE_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - /* l4_cfg */ static struct omap_hwmod omap54xx_l4_cfg_hwmod = { .name = "l4_cfg", @@ -618,22 +605,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_1 -> l4_abe */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_abe = { - .master = &omap54xx_l3_main_1_hwmod, - .slave = &omap54xx_l4_abe_hwmod, - .clk = "abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> l4_abe */ -static struct omap_hwmod_ocp_if omap54xx_mpu__l4_abe = { - .master = &omap54xx_mpu_hwmod, - .slave = &omap54xx_l4_abe_hwmod, - .clk = "abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_1 -> l4_cfg */ static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_cfg = { .master = &omap54xx_l3_main_1_hwmod, @@ -741,8 +712,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l3_main_1__l3_main_3, &omap54xx_l3_main_2__l3_main_3, &omap54xx_l4_cfg__l3_main_3, - &omap54xx_l3_main_1__l4_abe, - &omap54xx_mpu__l4_abe, &omap54xx_l3_main_1__l4_cfg, &omap54xx_l3_main_2__l4_per, &omap54xx_l3_main_1__l4_wkup, -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Tony Lindgren <tony@atomide.com> To: linux-omap@vger.kernel.org Cc: Rob Herring <robh@kernel.org>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, "Andrew F . Davis" <afd@ti.com>, Tero Kristo <t-kristo@ti.com>, Santosh Shilimkar <ssantosh@kernel.org>, Suman Anna <s-anna@ti.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 6/6] ARM: dts: Configure omap4 and 5 l4_abe for genpd and drop platform data Date: Wed, 20 May 2020 14:13:34 -0700 [thread overview] Message-ID: <20200520211334.61814-7-tony@atomide.com> (raw) In-Reply-To: <20200520211334.61814-1-tony@atomide.com> We can power off l4_abe domain when not in use when we configure it for genpd. And with that change, we can now also drop the old unused legacy platform data. Note that we also need to now use "simple-pm-bus" instead of "simple-bus" for PM runtime to get enabled for the bus. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/omap4-l4-abe.dtsi | 6 ++-- arch/arm/boot/dts/omap4.dtsi | 6 ++++ arch/arm/boot/dts/omap5-l4-abe.dtsi | 6 ++-- arch/arm/boot/dts/omap5.dtsi | 6 ++++ arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 33 ---------------------- arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 31 -------------------- 6 files changed, 20 insertions(+), 68 deletions(-) diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi --- a/arch/arm/boot/dts/omap4-l4-abe.dtsi +++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi @@ -1,14 +1,16 @@ &l4_abe { /* 0x40100000 */ - compatible = "ti,omap4-l4-abe", "simple-bus"; + compatible = "ti,omap4-l4-abe", "simple-pm-bus"; reg = <0x40100000 0x400>, <0x40100400 0x400>; reg-names = "la", "ap"; + power-domains = <&prm_abe>; + /* OMAP4_L4_ABE_CLKCTRL is read-only */ #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */ <0x49000000 0x49000000 0x100000>; segment@0 { /* 0x40100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -637,6 +637,12 @@ prm_tesla: prm@400 { #reset-cells = <1>; }; + prm_abe: prm@500 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x500 0x100>; + #power-domain-cells = <0>; + }; + prm_core: prm@700 { compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; reg = <0x700 0x100>; diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi --- a/arch/arm/boot/dts/omap5-l4-abe.dtsi +++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi @@ -1,14 +1,16 @@ &l4_abe { /* 0x40100000 */ - compatible = "ti,omap5-l4-abe", "simple-bus"; + compatible = "ti,omap5-l4-abe", "simple-pm-bus"; reg = <0x40100000 0x400>, <0x40100400 0x400>; reg-names = "la", "ap"; + power-domains = <&prm_abe>; + /* OMAP5_L4_ABE_CLKCTRL is read-only */ #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */ <0x49000000 0x49000000 0x100000>; segment@0 { /* 0x40100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -563,6 +563,12 @@ prm_dsp: prm@400 { #reset-cells = <1>; }; + prm_abe: prm@500 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x500 0x100>; + #power-domain-cells = <0>; + }; + prm_core: prm@700 { compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; reg = <0x700 0x100>; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -124,21 +124,6 @@ static struct omap_hwmod_class omap44xx_l4_hwmod_class = { .name = "l4", }; -/* l4_abe */ -static struct omap_hwmod omap44xx_l4_abe_hwmod = { - .name = "l4_abe", - .class = &omap44xx_l4_hwmod_class, - .clkdm_name = "abe_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_ABE_AESS_CONTEXT_OFFSET, - .lostcontext_mask = OMAP4430_LOSTMEM_AESSMEM_MASK, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - /* l4_cfg */ static struct omap_hwmod omap44xx_l4_cfg_hwmod = { .name = "l4_cfg", @@ -1007,22 +992,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_1 -> l4_abe */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = { - .master = &omap44xx_l3_main_1_hwmod, - .slave = &omap44xx_l4_abe_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> l4_abe */ -static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_l4_abe_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_1 -> l4_cfg */ static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = { .master = &omap44xx_l3_main_1_hwmod, @@ -1266,8 +1235,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l3_main_1__l3_main_3, &omap44xx_l3_main_2__l3_main_3, &omap44xx_l4_cfg__l3_main_3, - &omap44xx_l3_main_1__l4_abe, - &omap44xx_mpu__l4_abe, &omap44xx_l3_main_1__l4_cfg, &omap44xx_l3_main_2__l4_per, &omap44xx_l4_cfg__l4_wkup, diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -121,19 +121,6 @@ static struct omap_hwmod_class omap54xx_l4_hwmod_class = { .name = "l4", }; -/* l4_abe */ -static struct omap_hwmod omap54xx_l4_abe_hwmod = { - .name = "l4_abe", - .class = &omap54xx_l4_hwmod_class, - .clkdm_name = "abe_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_ABE_L4_ABE_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - /* l4_cfg */ static struct omap_hwmod omap54xx_l4_cfg_hwmod = { .name = "l4_cfg", @@ -618,22 +605,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_1 -> l4_abe */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_abe = { - .master = &omap54xx_l3_main_1_hwmod, - .slave = &omap54xx_l4_abe_hwmod, - .clk = "abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> l4_abe */ -static struct omap_hwmod_ocp_if omap54xx_mpu__l4_abe = { - .master = &omap54xx_mpu_hwmod, - .slave = &omap54xx_l4_abe_hwmod, - .clk = "abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_1 -> l4_cfg */ static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_cfg = { .master = &omap54xx_l3_main_1_hwmod, @@ -741,8 +712,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l3_main_1__l3_main_3, &omap54xx_l3_main_2__l3_main_3, &omap54xx_l4_cfg__l3_main_3, - &omap54xx_l3_main_1__l4_abe, - &omap54xx_mpu__l4_abe, &omap54xx_l3_main_1__l4_cfg, &omap54xx_l3_main_2__l4_per, &omap54xx_l3_main_1__l4_wkup, -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-20 21:14 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-20 21:13 [PATCHv2 0/6] Add initial genpd support for omap PRM driver Tony Lindgren 2020-05-20 21:13 ` Tony Lindgren 2020-05-20 21:13 ` [PATCH 1/6] dt-bindings: omap: Update PRM binding for genpd Tony Lindgren 2020-05-20 21:13 ` Tony Lindgren 2020-05-28 22:20 ` Rob Herring 2020-05-28 22:20 ` Rob Herring 2020-05-20 21:13 ` [PATCH 2/6] soc: ti: omap-prm: Add basic power domain support Tony Lindgren 2020-05-20 21:13 ` Tony Lindgren 2020-05-21 4:53 ` kbuild test robot 2020-05-21 4:53 ` kbuild test robot 2020-05-21 4:53 ` kbuild test robot 2020-05-20 21:13 ` [PATCH 3/6] soc: ti: omap-prm: Configure sgx power domain for am3 and am4 Tony Lindgren 2020-05-20 21:13 ` Tony Lindgren 2020-05-20 21:13 ` [PATCH 4/6] soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domain Tony Lindgren 2020-05-20 21:13 ` Tony Lindgren 2020-05-20 21:13 ` [PATCH 5/6] ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data Tony Lindgren 2020-05-20 21:13 ` Tony Lindgren 2020-05-20 21:13 ` Tony Lindgren [this message] 2020-05-20 21:13 ` [PATCH 6/6] ARM: dts: Configure omap4 and 5 l4_abe " Tony Lindgren -- strict thread matches above, loose matches on Subject: below -- 2020-07-02 15:45 [PATCHv4 0/6] Add initial genpd support for omap PRM driver Tony Lindgren 2020-07-02 15:45 ` [PATCH 6/6] ARM: dts: Configure omap4 and 5 l4_abe for genpd and drop platform data Tony Lindgren 2020-07-02 15:45 ` Tony Lindgren 2020-06-22 16:46 [PATCHv3 0/6] Add initial genpd support for omap PRM driver Tony Lindgren 2020-06-22 16:46 ` [PATCH 6/6] ARM: dts: Configure omap4 and 5 l4_abe for genpd and drop platform data Tony Lindgren 2020-05-12 20:38 [PATCH 0/6] Add initial genpd support for omap PRM driver Tony Lindgren 2020-05-12 20:38 ` [PATCH 6/6] ARM: dts: Configure omap4 and 5 l4_abe for genpd and drop platform data Tony Lindgren 2020-05-12 20:38 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200520211334.61814-7-tony@atomide.com \ --to=tony@atomide.com \ --cc=afd@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=robh@kernel.org \ --cc=s-anna@ti.com \ --cc=ssantosh@kernel.org \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.