From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devel@driverdev.osuosl.org,
linux-sunxi@googlegroups.com
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Yong Deng <yong.deng@magewell.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
Helen Koike <helen.koike@collabora.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
Hans Verkuil <hans.verkuil@cisco.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Hans Verkuil <hverkuil@xs4all.nl>,
kevin.lhopital@hotmail.com
Subject: [PATCH 13/14] ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node
Date: Fri, 23 Oct 2020 19:45:45 +0200 [thread overview]
Message-ID: <20201023174546.504028-14-paul.kocialkowski@bootlin.com> (raw)
In-Reply-To: <20201023174546.504028-1-paul.kocialkowski@bootlin.com>
MIPI CSI-2 is supported on the A83T with a dedicated controller that
covers both the protocol and D-PHY. It can be connected to the CSI
interface as a V4L2 subdev through the fwnode graph.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index c010b27fdb6a..99e07012aee7 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -1066,6 +1066,32 @@ csi_in: port {
};
};
+ mipi_csi2: mipi-csi2@1cb1000 {
+ compatible = "allwinner,sun8i-a83t-mipi-csi2";
+ reg = <0x01cb1000 0x1000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CSI>,
+ <&ccu CLK_CSI_SCLK>,
+ <&ccu CLK_MIPI_CSI>,
+ <&ccu CLK_CSI_MISC>;
+ clock-names = "bus", "mod", "mipi", "misc";
+ resets = <&ccu RST_BUS_CSI>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_csi2_in: port@0 {
+ reg = <0>;
+ };
+
+ mipi_csi2_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
hdmi: hdmi@1ee0000 {
compatible = "allwinner,sun8i-a83t-dw-hdmi";
reg = <0x01ee0000 0x10000>;
--
2.28.0
WARNING: multiple messages have this Message-ID (diff)
From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devel@driverdev.osuosl.org,
linux-sunxi@googlegroups.com
Cc: Hans Verkuil <hverkuil@xs4all.nl>,
Philipp Zabel <p.zabel@pengutronix.de>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Helen Koike <helen.koike@collabora.com>,
Vinod Koul <vkoul@kernel.org>, Maxime Ripard <mripard@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
Hans Verkuil <hans.verkuil@cisco.com>,
Yong Deng <yong.deng@magewell.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
kevin.lhopital@hotmail.com
Subject: [PATCH 13/14] ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node
Date: Fri, 23 Oct 2020 19:45:45 +0200 [thread overview]
Message-ID: <20201023174546.504028-14-paul.kocialkowski@bootlin.com> (raw)
In-Reply-To: <20201023174546.504028-1-paul.kocialkowski@bootlin.com>
MIPI CSI-2 is supported on the A83T with a dedicated controller that
covers both the protocol and D-PHY. It can be connected to the CSI
interface as a V4L2 subdev through the fwnode graph.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index c010b27fdb6a..99e07012aee7 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -1066,6 +1066,32 @@ csi_in: port {
};
};
+ mipi_csi2: mipi-csi2@1cb1000 {
+ compatible = "allwinner,sun8i-a83t-mipi-csi2";
+ reg = <0x01cb1000 0x1000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CSI>,
+ <&ccu CLK_CSI_SCLK>,
+ <&ccu CLK_MIPI_CSI>,
+ <&ccu CLK_CSI_MISC>;
+ clock-names = "bus", "mod", "mipi", "misc";
+ resets = <&ccu RST_BUS_CSI>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_csi2_in: port@0 {
+ reg = <0>;
+ };
+
+ mipi_csi2_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
hdmi: hdmi@1ee0000 {
compatible = "allwinner,sun8i-a83t-dw-hdmi";
reg = <0x01ee0000 0x10000>;
--
2.28.0
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
WARNING: multiple messages have this Message-ID (diff)
From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devel@driverdev.osuosl.org,
linux-sunxi@googlegroups.com
Cc: Hans Verkuil <hverkuil@xs4all.nl>,
Philipp Zabel <p.zabel@pengutronix.de>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Helen Koike <helen.koike@collabora.com>,
Vinod Koul <vkoul@kernel.org>, Maxime Ripard <mripard@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
Hans Verkuil <hans.verkuil@cisco.com>,
Yong Deng <yong.deng@magewell.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
kevin.lhopital@hotmail.com
Subject: [PATCH 13/14] ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node
Date: Fri, 23 Oct 2020 19:45:45 +0200 [thread overview]
Message-ID: <20201023174546.504028-14-paul.kocialkowski@bootlin.com> (raw)
In-Reply-To: <20201023174546.504028-1-paul.kocialkowski@bootlin.com>
MIPI CSI-2 is supported on the A83T with a dedicated controller that
covers both the protocol and D-PHY. It can be connected to the CSI
interface as a V4L2 subdev through the fwnode graph.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index c010b27fdb6a..99e07012aee7 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -1066,6 +1066,32 @@ csi_in: port {
};
};
+ mipi_csi2: mipi-csi2@1cb1000 {
+ compatible = "allwinner,sun8i-a83t-mipi-csi2";
+ reg = <0x01cb1000 0x1000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CSI>,
+ <&ccu CLK_CSI_SCLK>,
+ <&ccu CLK_MIPI_CSI>,
+ <&ccu CLK_CSI_MISC>;
+ clock-names = "bus", "mod", "mipi", "misc";
+ resets = <&ccu RST_BUS_CSI>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_csi2_in: port@0 {
+ reg = <0>;
+ };
+
+ mipi_csi2_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
hdmi: hdmi@1ee0000 {
compatible = "allwinner,sun8i-a83t-dw-hdmi";
reg = <0x01ee0000 0x10000>;
--
2.28.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-10-23 18:11 UTC|newest]
Thread overview: 198+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-23 17:45 [PATCH 00/14] Allwinner MIPI CSI-2 support for A31/V3s/A83T Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 01/14] phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 18:18 ` [linux-sunxi] " Jernej Škrabec
2020-10-23 18:18 ` Jernej Škrabec
2020-10-23 18:18 ` Jernej Škrabec
2020-10-24 8:31 ` Paul Kocialkowski
2020-10-24 8:31 ` Paul Kocialkowski
2020-10-24 8:31 ` Paul Kocialkowski
2020-10-30 22:44 ` Helen Koike
2020-10-30 22:44 ` Helen Koike
2020-10-30 22:44 ` Helen Koike
2020-10-23 17:45 ` [PATCH 02/14] phy: allwinner: phy-sun6i-mipi-dphy: Support D-PHY Rx mode for MIPI CSI-2 Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-26 15:38 ` Maxime Ripard
2020-10-26 15:38 ` Maxime Ripard
2020-10-26 15:38 ` Maxime Ripard
2020-10-27 9:23 ` Paul Kocialkowski
2020-10-27 9:23 ` Paul Kocialkowski
2020-10-27 9:23 ` Paul Kocialkowski
2020-10-27 18:28 ` Maxime Ripard
2020-10-27 18:28 ` Maxime Ripard
2020-10-27 18:28 ` Maxime Ripard
2020-11-04 10:53 ` Paul Kocialkowski
2020-11-04 10:53 ` Paul Kocialkowski
2020-11-04 10:53 ` Paul Kocialkowski
2020-10-30 22:44 ` Helen Koike
2020-10-30 22:44 ` Helen Koike
2020-10-30 22:44 ` Helen Koike
2020-11-04 10:54 ` Paul Kocialkowski
2020-11-04 10:54 ` Paul Kocialkowski
2020-11-04 10:54 ` Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 03/14] media: sun6i-csi: Support an optional dedicated memory pool Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-26 15:41 ` Maxime Ripard
2020-10-26 15:41 ` Maxime Ripard
2020-10-26 15:41 ` Maxime Ripard
2020-10-27 9:26 ` Paul Kocialkowski
2020-10-27 9:26 ` Paul Kocialkowski
2020-10-27 9:26 ` Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 04/14] media: sun6i-csi: Fix the image storage bpp for 10/12-bit Bayer formats Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-30 22:45 ` Helen Koike
2020-10-30 22:45 ` Helen Koike
2020-10-30 22:45 ` Helen Koike
2020-11-04 10:56 ` Paul Kocialkowski
2020-11-04 10:56 ` Paul Kocialkowski
2020-11-04 10:56 ` Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 05/14] media: sun6i-csi: Only configure the interface data width for parallel Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-26 16:00 ` Maxime Ripard
2020-10-26 16:00 ` Maxime Ripard
2020-10-26 16:00 ` Maxime Ripard
2020-10-27 9:31 ` Paul Kocialkowski
2020-10-27 9:31 ` Paul Kocialkowski
2020-10-27 9:31 ` Paul Kocialkowski
2020-10-27 18:31 ` Maxime Ripard
2020-10-27 18:31 ` Maxime Ripard
2020-10-27 18:31 ` Maxime Ripard
2020-10-23 17:45 ` [PATCH 06/14] media: sun6i-csi: Support feeding from the MIPI CSI-2 controller Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 07/14] dt-bindings: media: i2c: Add A31 MIPI CSI-2 bindings documentation Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-26 16:14 ` Maxime Ripard
2020-10-26 16:14 ` Maxime Ripard
2020-10-26 16:14 ` Maxime Ripard
2020-10-27 9:52 ` Paul Kocialkowski
2020-10-27 9:52 ` Paul Kocialkowski
2020-10-27 9:52 ` Paul Kocialkowski
2020-10-27 18:44 ` Maxime Ripard
2020-10-27 18:44 ` Maxime Ripard
2020-10-27 18:44 ` Maxime Ripard
2020-11-04 10:48 ` Paul Kocialkowski
2020-11-04 10:48 ` Paul Kocialkowski
2020-11-04 10:48 ` Paul Kocialkowski
2020-11-04 16:53 ` Maxime Ripard
2020-11-04 16:53 ` Maxime Ripard
2020-11-04 16:53 ` Maxime Ripard
2020-10-30 16:33 ` Rob Herring
2020-10-30 16:33 ` Rob Herring
2020-10-30 16:33 ` Rob Herring
2020-10-30 16:56 ` Sakari Ailus
2020-10-30 16:56 ` Sakari Ailus
2020-10-30 16:56 ` Sakari Ailus
2020-10-23 17:45 ` [PATCH 08/14] media: sunxi: Add support for the A31 MIPI CSI-2 controller Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-26 8:39 ` Dan Carpenter
2020-10-26 8:39 ` Dan Carpenter
2020-10-26 8:39 ` Dan Carpenter
2020-10-26 16:54 ` Maxime Ripard
2020-10-26 16:54 ` Maxime Ripard
2020-10-26 16:54 ` Maxime Ripard
2020-11-04 11:34 ` Paul Kocialkowski
2020-11-04 11:34 ` Paul Kocialkowski
2020-11-04 11:34 ` Paul Kocialkowski
2020-11-04 18:56 ` Maxime Ripard
2020-11-04 18:56 ` Maxime Ripard
2020-11-04 18:56 ` Maxime Ripard
2020-11-05 14:52 ` Paul Kocialkowski
2020-11-05 14:52 ` Paul Kocialkowski
2020-11-05 14:52 ` Paul Kocialkowski
2020-10-30 22:45 ` Helen Koike
2020-10-30 22:45 ` Helen Koike
2020-10-30 22:45 ` Helen Koike
2020-11-02 9:21 ` Maxime Ripard
2020-11-02 9:21 ` Maxime Ripard
2020-11-02 9:21 ` Maxime Ripard
2020-11-04 11:17 ` Paul Kocialkowski
2020-11-04 11:17 ` Paul Kocialkowski
2020-11-04 11:17 ` Paul Kocialkowski
2020-11-04 16:38 ` Helen Koike
2020-11-04 16:38 ` Helen Koike
2020-11-04 16:38 ` Helen Koike
2020-11-04 18:45 ` Maxime Ripard
2020-11-04 18:45 ` Maxime Ripard
2020-11-04 18:45 ` Maxime Ripard
2020-11-05 14:14 ` Helen Koike
2020-11-05 14:14 ` Helen Koike
2020-11-05 14:14 ` Helen Koike
2020-11-05 8:45 ` Sakari Ailus
2020-11-05 8:45 ` Sakari Ailus
2020-11-05 8:45 ` Sakari Ailus
2020-11-05 14:55 ` Paul Kocialkowski
2020-11-05 14:55 ` Paul Kocialkowski
2020-11-05 14:55 ` Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 09/14] ARM: dts: sun8i: v3s: Add CSI0 camera interface node Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 10/14] ARM: dts: sun8i: v3s: Add MIPI D-PHY and MIPI CSI-2 interface nodes Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-26 16:55 ` Maxime Ripard
2020-10-26 16:55 ` Maxime Ripard
2020-10-26 16:55 ` Maxime Ripard
2020-10-23 17:45 ` [PATCH 11/14] dt-bindings: media: i2c: Add A83T MIPI CSI-2 bindings documentation Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-26 16:56 ` Maxime Ripard
2020-10-26 16:56 ` Maxime Ripard
2020-10-26 16:56 ` Maxime Ripard
2020-11-04 10:33 ` Paul Kocialkowski
2020-11-04 10:33 ` Paul Kocialkowski
2020-11-04 10:33 ` Paul Kocialkowski
2020-11-05 8:48 ` Sakari Ailus
2020-11-05 8:48 ` Sakari Ailus
2020-11-05 8:48 ` Sakari Ailus
2020-10-23 17:45 ` [PATCH 12/14] media: sunxi: Add support for the A83T MIPI CSI-2 controller Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-26 8:53 ` Dan Carpenter
2020-10-26 8:53 ` Dan Carpenter
2020-10-26 8:53 ` Dan Carpenter
2020-10-26 17:00 ` Maxime Ripard
2020-10-26 17:00 ` Maxime Ripard
2020-10-26 17:00 ` Maxime Ripard
2020-11-04 10:37 ` Paul Kocialkowski
2020-11-04 10:37 ` Paul Kocialkowski
2020-11-04 10:37 ` Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski [this message]
2020-10-23 17:45 ` [PATCH 13/14] ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 14/14] media: sunxi: sun8i-a83t-mipi-csi2: Avoid using the (unsolicited) interrupt Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-23 17:45 ` Paul Kocialkowski
2020-10-26 16:57 ` Maxime Ripard
2020-10-26 16:57 ` Maxime Ripard
2020-10-26 16:57 ` Maxime Ripard
2020-10-26 17:20 ` [PATCH 00/14] Allwinner MIPI CSI-2 support for A31/V3s/A83T Maxime Ripard
2020-10-26 17:20 ` Maxime Ripard
2020-10-26 17:20 ` Maxime Ripard
2020-10-30 22:44 ` Helen Koike
2020-10-30 22:44 ` Helen Koike
2020-10-30 22:44 ` Helen Koike
2020-11-02 9:17 ` Maxime Ripard
2020-11-02 9:17 ` Maxime Ripard
2020-11-02 9:17 ` Maxime Ripard
2020-11-04 11:11 ` Paul Kocialkowski
2020-11-04 11:11 ` Paul Kocialkowski
2020-11-04 11:11 ` Paul Kocialkowski
2020-11-04 11:14 ` Paul Kocialkowski
2020-11-04 11:14 ` Paul Kocialkowski
2020-11-04 11:14 ` Paul Kocialkowski
2020-11-04 16:36 ` Helen Koike
2020-11-04 16:36 ` Helen Koike
2020-11-04 16:36 ` Helen Koike
2020-11-05 14:58 ` Paul Kocialkowski
2020-11-05 14:58 ` Paul Kocialkowski
2020-11-05 14:58 ` Paul Kocialkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201023174546.504028-14-paul.kocialkowski@bootlin.com \
--to=paul.kocialkowski@bootlin.com \
--cc=devel@driverdev.osuosl.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=hans.verkuil@cisco.com \
--cc=helen.koike@collabora.com \
--cc=hverkuil@xs4all.nl \
--cc=kevin.lhopital@hotmail.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mchehab@kernel.org \
--cc=mripard@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vkoul@kernel.org \
--cc=wens@csie.org \
--cc=yong.deng@magewell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.