From: Biwen Li <biwen.li@oss.nxp.com>
To: shawnguo@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
leoyang.li@nxp.com, zhiqiang.hou@nxp.com, tglx@linutronix.de,
jason@lakedaemon.net, maz@kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
jiafei.pan@nxp.com, xiaobo.xie@nxp.com,
linux-arm-kernel@lists.infradead.org, Biwen Li <biwen.li@nxp.com>
Subject: [RESEND 05/11] arm64: dts: ls1088a: add DT node for external interrupt lines
Date: Mon, 26 Oct 2020 16:01:21 +0800 [thread overview]
Message-ID: <20201026080127.40499-5-biwen.li@oss.nxp.com> (raw)
In-Reply-To: <20201026080127.40499-1-biwen.li@oss.nxp.com>
From: Biwen Li <biwen.li@nxp.com>
Add device-tree node for external interrupt lines IRQ0-IRQ11.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
.../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 33 ++++++++++++++++++-
1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 169f4742ae3b..12fe8f079c28 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -2,7 +2,7 @@
/*
* Device Tree Include file for NXP Layerscape-1088A family SoC.
*
- * Copyright 2017 NXP
+ * Copyright 2017-2020 NXP
*
* Harninder Rai <harninder.rai@nxp.com>
*
@@ -206,6 +206,37 @@
little-endian;
};
+ isc: syscon@1f70000 {
+ compatible = "fsl,ls1088a-isc", "syscon";
+ reg = <0x0 0x1f70000 0x0 0x10000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+ extirq: interrupt-controller@14 {
+ compatible = "fsl,ls1088a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x14 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xffffffff 0x0>;
+ };
+ };
+
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Biwen Li <biwen.li@oss.nxp.com>
To: shawnguo@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
leoyang.li@nxp.com, zhiqiang.hou@nxp.com, tglx@linutronix.de,
jason@lakedaemon.net, maz@kernel.org
Cc: Biwen Li <biwen.li@nxp.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
xiaobo.xie@nxp.com, jiafei.pan@nxp.com,
linux-arm-kernel@lists.infradead.org
Subject: [RESEND 05/11] arm64: dts: ls1088a: add DT node for external interrupt lines
Date: Mon, 26 Oct 2020 16:01:21 +0800 [thread overview]
Message-ID: <20201026080127.40499-5-biwen.li@oss.nxp.com> (raw)
In-Reply-To: <20201026080127.40499-1-biwen.li@oss.nxp.com>
From: Biwen Li <biwen.li@nxp.com>
Add device-tree node for external interrupt lines IRQ0-IRQ11.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
.../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 33 ++++++++++++++++++-
1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 169f4742ae3b..12fe8f079c28 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -2,7 +2,7 @@
/*
* Device Tree Include file for NXP Layerscape-1088A family SoC.
*
- * Copyright 2017 NXP
+ * Copyright 2017-2020 NXP
*
* Harninder Rai <harninder.rai@nxp.com>
*
@@ -206,6 +206,37 @@
little-endian;
};
+ isc: syscon@1f70000 {
+ compatible = "fsl,ls1088a-isc", "syscon";
+ reg = <0x0 0x1f70000 0x0 0x10000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+ extirq: interrupt-controller@14 {
+ compatible = "fsl,ls1088a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x14 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xffffffff 0x0>;
+ };
+ };
+
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-10-26 8:11 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-26 8:01 [RESEND 01/11] irqchip: ls-extirq: Add LS1043A, LS1088A external interrupt Biwen Li
2020-10-26 8:01 ` Biwen Li
2020-10-26 8:01 ` [RESEND 02/11] arm64: dts: ls1043a: add DT node for external interrupt lines Biwen Li
2020-10-26 8:01 ` Biwen Li
2020-10-26 8:01 ` [RESEND 03/11] arm64: dts: ls1046a: " Biwen Li
2020-10-26 8:01 ` Biwen Li
2020-10-26 8:01 ` [RESEND 04/11] arm64: dts: ls1046ardb: Add interrupt line for RTC node Biwen Li
2020-10-26 8:01 ` Biwen Li
2020-10-26 8:01 ` Biwen Li [this message]
2020-10-26 8:01 ` [RESEND 05/11] arm64: dts: ls1088a: add DT node for external interrupt lines Biwen Li
2020-10-26 8:01 ` [RESEND 06/11] arm64: dts: ls1088ardb: fix interrupt line for RTC node Biwen Li
2020-10-26 8:01 ` Biwen Li
2020-10-26 8:01 ` [RESEND 07/11] arm64: dts: ls208xa: add DT node for external interrupt lines Biwen Li
2020-10-26 8:01 ` Biwen Li
2020-10-26 8:01 ` [RESEND 08/11] arm64: dts: ls208xa-rdb: add interrupt line for RTC node Biwen Li
2020-10-26 8:01 ` Biwen Li
2020-10-26 8:01 ` [RESEND 09/11] arm64: dts: lx2160a: add DT node for external interrupt lines Biwen Li
2020-10-26 8:01 ` Biwen Li
2020-10-26 8:01 ` [RESEND 10/11] arm64: dts: lx2160ardb: fix interrupt line for RTC node Biwen Li
2020-10-26 8:01 ` Biwen Li
2020-10-26 8:01 ` [RESEND 11/11] dt-bindings: interrupt-controller: update bindings for supporting more SoCs Biwen Li
2020-10-26 8:01 ` Biwen Li
2020-10-26 8:44 ` [RESEND 01/11] irqchip: ls-extirq: Add LS1043A, LS1088A external interrupt Marc Zyngier
2020-10-26 8:44 ` Marc Zyngier
2020-10-26 9:06 ` Rasmus Villemoes
2020-10-26 9:06 ` Rasmus Villemoes
2020-10-26 9:22 ` Marc Zyngier
2020-10-26 9:22 ` Marc Zyngier
2020-10-26 15:06 ` Leo Li
2020-10-26 15:06 ` Leo Li
2020-10-26 15:42 ` Marc Zyngier
2020-10-26 15:42 ` Marc Zyngier
2020-10-27 3:14 ` Biwen Li
2020-10-27 3:14 ` Biwen Li
2020-10-27 3:25 ` Biwen Li (OSS)
2020-10-27 3:25 ` Biwen Li (OSS)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201026080127.40499-5-biwen.li@oss.nxp.com \
--to=biwen.li@oss.nxp.com \
--cc=biwen.li@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=jason@lakedaemon.net \
--cc=jiafei.pan@nxp.com \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=tglx@linutronix.de \
--cc=xiaobo.xie@nxp.com \
--cc=zhiqiang.hou@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.