From: Matthew Brost <matthew.brost@intel.com>
To: <intel-gfx@lists.freedesktop.org>, <dri-devel@lists.freedesktop.org>
Cc: matthew.brost@intel.com, tvrtko.ursulin@intel.com,
daniele.ceraolospurio@intel.com, jason.ekstrand@intel.com,
jon.bloomfield@intel.com, daniel.vetter@intel.com,
john.c.harrison@intel.com
Subject: [RFC PATCH 08/97] drm/i915/guc: Keep strict GuC ABI definitions
Date: Thu, 6 May 2021 12:13:22 -0700 [thread overview]
Message-ID: <20210506191451.77768-9-matthew.brost@intel.com> (raw)
In-Reply-To: <20210506191451.77768-1-matthew.brost@intel.com>
From: Michal Wajdeczko <michal.wajdeczko@intel.com>
Our fwif.h file is now mix of strict firmware ABI definitions and
set of our helpers. In anticipation of upcoming changes to the GuC
interface try to keep them separate in smaller maintainable files.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
---
.../gpu/drm/i915/gt/uc/abi/guc_actions_abi.h | 51 +++++
.../gt/uc/abi/guc_communication_ctb_abi.h | 106 +++++++++
.../gt/uc/abi/guc_communication_mmio_abi.h | 52 +++++
.../gpu/drm/i915/gt/uc/abi/guc_errors_abi.h | 14 ++
.../gpu/drm/i915/gt/uc/abi/guc_messages_abi.h | 21 ++
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h | 203 +-----------------
6 files changed, 250 insertions(+), 197 deletions(-)
create mode 100644 drivers/gpu/drm/i915/gt/uc/abi/guc_actions_abi.h
create mode 100644 drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h
create mode 100644 drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h
create mode 100644 drivers/gpu/drm/i915/gt/uc/abi/guc_errors_abi.h
create mode 100644 drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_actions_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_actions_abi.h
new file mode 100644
index 000000000000..90efef8a73e4
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_actions_abi.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2014-2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_ACTIONS_ABI_H
+#define _ABI_GUC_ACTIONS_ABI_H
+
+enum intel_guc_action {
+ INTEL_GUC_ACTION_DEFAULT = 0x0,
+ INTEL_GUC_ACTION_REQUEST_PREEMPTION = 0x2,
+ INTEL_GUC_ACTION_REQUEST_ENGINE_RESET = 0x3,
+ INTEL_GUC_ACTION_ALLOCATE_DOORBELL = 0x10,
+ INTEL_GUC_ACTION_DEALLOCATE_DOORBELL = 0x20,
+ INTEL_GUC_ACTION_LOG_BUFFER_FILE_FLUSH_COMPLETE = 0x30,
+ INTEL_GUC_ACTION_UK_LOG_ENABLE_LOGGING = 0x40,
+ INTEL_GUC_ACTION_FORCE_LOG_BUFFER_FLUSH = 0x302,
+ INTEL_GUC_ACTION_ENTER_S_STATE = 0x501,
+ INTEL_GUC_ACTION_EXIT_S_STATE = 0x502,
+ INTEL_GUC_ACTION_SLPC_REQUEST = 0x3003,
+ INTEL_GUC_ACTION_AUTHENTICATE_HUC = 0x4000,
+ INTEL_GUC_ACTION_REGISTER_COMMAND_TRANSPORT_BUFFER = 0x4505,
+ INTEL_GUC_ACTION_DEREGISTER_COMMAND_TRANSPORT_BUFFER = 0x4506,
+ INTEL_GUC_ACTION_LIMIT
+};
+
+enum intel_guc_preempt_options {
+ INTEL_GUC_PREEMPT_OPTION_DROP_WORK_Q = 0x4,
+ INTEL_GUC_PREEMPT_OPTION_DROP_SUBMIT_Q = 0x8,
+};
+
+enum intel_guc_report_status {
+ INTEL_GUC_REPORT_STATUS_UNKNOWN = 0x0,
+ INTEL_GUC_REPORT_STATUS_ACKED = 0x1,
+ INTEL_GUC_REPORT_STATUS_ERROR = 0x2,
+ INTEL_GUC_REPORT_STATUS_COMPLETE = 0x4,
+};
+
+enum intel_guc_sleep_state_status {
+ INTEL_GUC_SLEEP_STATE_SUCCESS = 0x1,
+ INTEL_GUC_SLEEP_STATE_PREEMPT_TO_IDLE_FAILED = 0x2,
+ INTEL_GUC_SLEEP_STATE_ENGINE_RESET_FAILED = 0x3
+#define INTEL_GUC_SLEEP_STATE_INVALID_MASK 0x80000000
+};
+
+#define GUC_LOG_CONTROL_LOGGING_ENABLED (1 << 0)
+#define GUC_LOG_CONTROL_VERBOSITY_SHIFT 4
+#define GUC_LOG_CONTROL_VERBOSITY_MASK (0xF << GUC_LOG_CONTROL_VERBOSITY_SHIFT)
+#define GUC_LOG_CONTROL_DEFAULT_LOGGING (1 << 8)
+
+#endif /* _ABI_GUC_ACTIONS_ABI_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h
new file mode 100644
index 000000000000..ebd8c3e0e4bb
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2014-2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_COMMUNICATION_CTB_ABI_H
+#define _ABI_GUC_COMMUNICATION_CTB_ABI_H
+
+#include <linux/types.h>
+
+/**
+ * DOC: CTB based communication
+ *
+ * The CTB (command transport buffer) communication between Host and GuC
+ * is based on u32 data stream written to the shared buffer. One buffer can
+ * be used to transmit data only in one direction (one-directional channel).
+ *
+ * Current status of the each buffer is stored in the buffer descriptor.
+ * Buffer descriptor holds tail and head fields that represents active data
+ * stream. The tail field is updated by the data producer (sender), and head
+ * field is updated by the data consumer (receiver)::
+ *
+ * +------------+
+ * | DESCRIPTOR | +=================+============+========+
+ * +============+ | | MESSAGE(s) | |
+ * | address |--------->+=================+============+========+
+ * +------------+
+ * | head | ^-----head--------^
+ * +------------+
+ * | tail | ^---------tail-----------------^
+ * +------------+
+ * | size | ^---------------size--------------------^
+ * +------------+
+ *
+ * Each message in data stream starts with the single u32 treated as a header,
+ * followed by optional set of u32 data that makes message specific payload::
+ *
+ * +------------+---------+---------+---------+
+ * | MESSAGE |
+ * +------------+---------+---------+---------+
+ * | msg[0] | [1] | ... | [n-1] |
+ * +------------+---------+---------+---------+
+ * | MESSAGE | MESSAGE PAYLOAD |
+ * + HEADER +---------+---------+---------+
+ * | | 0 | ... | n |
+ * +======+=====+=========+=========+=========+
+ * | 31:16| code| | | |
+ * +------+-----+ | | |
+ * | 15:5|flags| | | |
+ * +------+-----+ | | |
+ * | 4:0| len| | | |
+ * +------+-----+---------+---------+---------+
+ *
+ * ^-------------len-------------^
+ *
+ * The message header consists of:
+ *
+ * - **len**, indicates length of the message payload (in u32)
+ * - **code**, indicates message code
+ * - **flags**, holds various bits to control message handling
+ */
+
+/*
+ * Describes single command transport buffer.
+ * Used by both guc-master and clients.
+ */
+struct guc_ct_buffer_desc {
+ u32 addr; /* gfx address */
+ u64 host_private; /* host private data */
+ u32 size; /* size in bytes */
+ u32 head; /* offset updated by GuC*/
+ u32 tail; /* offset updated by owner */
+ u32 is_in_error; /* error indicator */
+ u32 fence; /* fence updated by GuC */
+ u32 status; /* status updated by GuC */
+ u32 owner; /* id of the channel owner */
+ u32 owner_sub_id; /* owner-defined field for extra tracking */
+ u32 reserved[5];
+} __packed;
+
+/* Type of command transport buffer */
+#define INTEL_GUC_CT_BUFFER_TYPE_SEND 0x0u
+#define INTEL_GUC_CT_BUFFER_TYPE_RECV 0x1u
+
+/*
+ * Definition of the command transport message header (DW0)
+ *
+ * bit[4..0] message len (in dwords)
+ * bit[7..5] reserved
+ * bit[8] response (G2H only)
+ * bit[8] write fence to desc (H2G only)
+ * bit[9] write status to H2G buff (H2G only)
+ * bit[10] send status back via G2H (H2G only)
+ * bit[15..11] reserved
+ * bit[31..16] action code
+ */
+#define GUC_CT_MSG_LEN_SHIFT 0
+#define GUC_CT_MSG_LEN_MASK 0x1F
+#define GUC_CT_MSG_IS_RESPONSE (1 << 8)
+#define GUC_CT_MSG_WRITE_FENCE_TO_DESC (1 << 8)
+#define GUC_CT_MSG_WRITE_STATUS_TO_BUFF (1 << 9)
+#define GUC_CT_MSG_SEND_STATUS (1 << 10)
+#define GUC_CT_MSG_ACTION_SHIFT 16
+#define GUC_CT_MSG_ACTION_MASK 0xFFFF
+
+#endif /* _ABI_GUC_COMMUNICATION_CTB_ABI_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h
new file mode 100644
index 000000000000..be066a62e9e0
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2014-2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_COMMUNICATION_MMIO_ABI_H
+#define _ABI_GUC_COMMUNICATION_MMIO_ABI_H
+
+/**
+ * DOC: MMIO based communication
+ *
+ * The MMIO based communication between Host and GuC uses software scratch
+ * registers, where first register holds data treated as message header,
+ * and other registers are used to hold message payload.
+ *
+ * For Gen9+, GuC uses software scratch registers 0xC180-0xC1B8,
+ * but no H2G command takes more than 8 parameters and the GuC FW
+ * itself uses an 8-element array to store the H2G message.
+ *
+ * +-----------+---------+---------+---------+
+ * | MMIO[0] | MMIO[1] | ... | MMIO[n] |
+ * +-----------+---------+---------+---------+
+ * | header | optional payload |
+ * +======+====+=========+=========+=========+
+ * | 31:28|type| | | |
+ * +------+----+ | | |
+ * | 27:16|data| | | |
+ * +------+----+ | | |
+ * | 15:0|code| | | |
+ * +------+----+---------+---------+---------+
+ *
+ * The message header consists of:
+ *
+ * - **type**, indicates message type
+ * - **code**, indicates message code, is specific for **type**
+ * - **data**, indicates message data, optional, depends on **code**
+ *
+ * The following message **types** are supported:
+ *
+ * - **REQUEST**, indicates Host-to-GuC request, requested GuC action code
+ * must be priovided in **code** field. Optional action specific parameters
+ * can be provided in remaining payload registers or **data** field.
+ *
+ * - **RESPONSE**, indicates GuC-to-Host response from earlier GuC request,
+ * action response status will be provided in **code** field. Optional
+ * response data can be returned in remaining payload registers or **data**
+ * field.
+ */
+
+#define GUC_MAX_MMIO_MSG_LEN 8
+
+#endif /* _ABI_GUC_COMMUNICATION_MMIO_ABI_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_errors_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_errors_abi.h
new file mode 100644
index 000000000000..488b6061ee89
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_errors_abi.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2014-2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_ERRORS_ABI_H
+#define _ABI_GUC_ERRORS_ABI_H
+
+enum intel_guc_response_status {
+ INTEL_GUC_RESPONSE_STATUS_SUCCESS = 0x0,
+ INTEL_GUC_RESPONSE_STATUS_GENERIC_FAIL = 0xF000,
+};
+
+#endif /* _ABI_GUC_ERRORS_ABI_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
new file mode 100644
index 000000000000..775e21f3058c
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2014-2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_MESSAGES_ABI_H
+#define _ABI_GUC_MESSAGES_ABI_H
+
+#define INTEL_GUC_MSG_TYPE_SHIFT 28
+#define INTEL_GUC_MSG_TYPE_MASK (0xF << INTEL_GUC_MSG_TYPE_SHIFT)
+#define INTEL_GUC_MSG_DATA_SHIFT 16
+#define INTEL_GUC_MSG_DATA_MASK (0xFFF << INTEL_GUC_MSG_DATA_SHIFT)
+#define INTEL_GUC_MSG_CODE_SHIFT 0
+#define INTEL_GUC_MSG_CODE_MASK (0xFFFF << INTEL_GUC_MSG_CODE_SHIFT)
+
+enum intel_guc_msg_type {
+ INTEL_GUC_MSG_TYPE_REQUEST = 0x0,
+ INTEL_GUC_MSG_TYPE_RESPONSE = 0xF,
+};
+
+#endif /* _ABI_GUC_MESSAGES_ABI_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h b/drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h
index 0f9afcde1d0b..9bf35240e723 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h
@@ -10,6 +10,12 @@
#include <linux/compiler.h>
#include <linux/types.h>
+#include "abi/guc_actions_abi.h"
+#include "abi/guc_errors_abi.h"
+#include "abi/guc_communication_mmio_abi.h"
+#include "abi/guc_communication_ctb_abi.h"
+#include "abi/guc_messages_abi.h"
+
#define GUC_CLIENT_PRIORITY_KMD_HIGH 0
#define GUC_CLIENT_PRIORITY_HIGH 1
#define GUC_CLIENT_PRIORITY_KMD_NORMAL 2
@@ -207,101 +213,6 @@ struct guc_stage_desc {
u64 desc_private;
} __packed;
-/**
- * DOC: CTB based communication
- *
- * The CTB (command transport buffer) communication between Host and GuC
- * is based on u32 data stream written to the shared buffer. One buffer can
- * be used to transmit data only in one direction (one-directional channel).
- *
- * Current status of the each buffer is stored in the buffer descriptor.
- * Buffer descriptor holds tail and head fields that represents active data
- * stream. The tail field is updated by the data producer (sender), and head
- * field is updated by the data consumer (receiver)::
- *
- * +------------+
- * | DESCRIPTOR | +=================+============+========+
- * +============+ | | MESSAGE(s) | |
- * | address |--------->+=================+============+========+
- * +------------+
- * | head | ^-----head--------^
- * +------------+
- * | tail | ^---------tail-----------------^
- * +------------+
- * | size | ^---------------size--------------------^
- * +------------+
- *
- * Each message in data stream starts with the single u32 treated as a header,
- * followed by optional set of u32 data that makes message specific payload::
- *
- * +------------+---------+---------+---------+
- * | MESSAGE |
- * +------------+---------+---------+---------+
- * | msg[0] | [1] | ... | [n-1] |
- * +------------+---------+---------+---------+
- * | MESSAGE | MESSAGE PAYLOAD |
- * + HEADER +---------+---------+---------+
- * | | 0 | ... | n |
- * +======+=====+=========+=========+=========+
- * | 31:16| code| | | |
- * +------+-----+ | | |
- * | 15:5|flags| | | |
- * +------+-----+ | | |
- * | 4:0| len| | | |
- * +------+-----+---------+---------+---------+
- *
- * ^-------------len-------------^
- *
- * The message header consists of:
- *
- * - **len**, indicates length of the message payload (in u32)
- * - **code**, indicates message code
- * - **flags**, holds various bits to control message handling
- */
-
-/*
- * Describes single command transport buffer.
- * Used by both guc-master and clients.
- */
-struct guc_ct_buffer_desc {
- u32 addr; /* gfx address */
- u64 host_private; /* host private data */
- u32 size; /* size in bytes */
- u32 head; /* offset updated by GuC*/
- u32 tail; /* offset updated by owner */
- u32 is_in_error; /* error indicator */
- u32 fence; /* fence updated by GuC */
- u32 status; /* status updated by GuC */
- u32 owner; /* id of the channel owner */
- u32 owner_sub_id; /* owner-defined field for extra tracking */
- u32 reserved[5];
-} __packed;
-
-/* Type of command transport buffer */
-#define INTEL_GUC_CT_BUFFER_TYPE_SEND 0x0u
-#define INTEL_GUC_CT_BUFFER_TYPE_RECV 0x1u
-
-/*
- * Definition of the command transport message header (DW0)
- *
- * bit[4..0] message len (in dwords)
- * bit[7..5] reserved
- * bit[8] response (G2H only)
- * bit[8] write fence to desc (H2G only)
- * bit[9] write status to H2G buff (H2G only)
- * bit[10] send status back via G2H (H2G only)
- * bit[15..11] reserved
- * bit[31..16] action code
- */
-#define GUC_CT_MSG_LEN_SHIFT 0
-#define GUC_CT_MSG_LEN_MASK 0x1F
-#define GUC_CT_MSG_IS_RESPONSE (1 << 8)
-#define GUC_CT_MSG_WRITE_FENCE_TO_DESC (1 << 8)
-#define GUC_CT_MSG_WRITE_STATUS_TO_BUFF (1 << 9)
-#define GUC_CT_MSG_SEND_STATUS (1 << 10)
-#define GUC_CT_MSG_ACTION_SHIFT 16
-#define GUC_CT_MSG_ACTION_MASK 0xFFFF
-
#define GUC_POWER_UNSPECIFIED 0
#define GUC_POWER_D0 1
#define GUC_POWER_D1 2
@@ -477,119 +388,17 @@ struct guc_shared_ctx_data {
struct guc_ctx_report preempt_ctx_report[GUC_MAX_ENGINES_NUM];
} __packed;
-/**
- * DOC: MMIO based communication
- *
- * The MMIO based communication between Host and GuC uses software scratch
- * registers, where first register holds data treated as message header,
- * and other registers are used to hold message payload.
- *
- * For Gen9+, GuC uses software scratch registers 0xC180-0xC1B8,
- * but no H2G command takes more than 8 parameters and the GuC FW
- * itself uses an 8-element array to store the H2G message.
- *
- * +-----------+---------+---------+---------+
- * | MMIO[0] | MMIO[1] | ... | MMIO[n] |
- * +-----------+---------+---------+---------+
- * | header | optional payload |
- * +======+====+=========+=========+=========+
- * | 31:28|type| | | |
- * +------+----+ | | |
- * | 27:16|data| | | |
- * +------+----+ | | |
- * | 15:0|code| | | |
- * +------+----+---------+---------+---------+
- *
- * The message header consists of:
- *
- * - **type**, indicates message type
- * - **code**, indicates message code, is specific for **type**
- * - **data**, indicates message data, optional, depends on **code**
- *
- * The following message **types** are supported:
- *
- * - **REQUEST**, indicates Host-to-GuC request, requested GuC action code
- * must be priovided in **code** field. Optional action specific parameters
- * can be provided in remaining payload registers or **data** field.
- *
- * - **RESPONSE**, indicates GuC-to-Host response from earlier GuC request,
- * action response status will be provided in **code** field. Optional
- * response data can be returned in remaining payload registers or **data**
- * field.
- */
-
-#define GUC_MAX_MMIO_MSG_LEN 8
-
-#define INTEL_GUC_MSG_TYPE_SHIFT 28
-#define INTEL_GUC_MSG_TYPE_MASK (0xF << INTEL_GUC_MSG_TYPE_SHIFT)
-#define INTEL_GUC_MSG_DATA_SHIFT 16
-#define INTEL_GUC_MSG_DATA_MASK (0xFFF << INTEL_GUC_MSG_DATA_SHIFT)
-#define INTEL_GUC_MSG_CODE_SHIFT 0
-#define INTEL_GUC_MSG_CODE_MASK (0xFFFF << INTEL_GUC_MSG_CODE_SHIFT)
-
#define __INTEL_GUC_MSG_GET(T, m) \
(((m) & INTEL_GUC_MSG_ ## T ## _MASK) >> INTEL_GUC_MSG_ ## T ## _SHIFT)
#define INTEL_GUC_MSG_TO_TYPE(m) __INTEL_GUC_MSG_GET(TYPE, m)
#define INTEL_GUC_MSG_TO_DATA(m) __INTEL_GUC_MSG_GET(DATA, m)
#define INTEL_GUC_MSG_TO_CODE(m) __INTEL_GUC_MSG_GET(CODE, m)
-enum intel_guc_msg_type {
- INTEL_GUC_MSG_TYPE_REQUEST = 0x0,
- INTEL_GUC_MSG_TYPE_RESPONSE = 0xF,
-};
-
#define __INTEL_GUC_MSG_TYPE_IS(T, m) \
(INTEL_GUC_MSG_TO_TYPE(m) == INTEL_GUC_MSG_TYPE_ ## T)
#define INTEL_GUC_MSG_IS_REQUEST(m) __INTEL_GUC_MSG_TYPE_IS(REQUEST, m)
#define INTEL_GUC_MSG_IS_RESPONSE(m) __INTEL_GUC_MSG_TYPE_IS(RESPONSE, m)
-enum intel_guc_action {
- INTEL_GUC_ACTION_DEFAULT = 0x0,
- INTEL_GUC_ACTION_REQUEST_PREEMPTION = 0x2,
- INTEL_GUC_ACTION_REQUEST_ENGINE_RESET = 0x3,
- INTEL_GUC_ACTION_ALLOCATE_DOORBELL = 0x10,
- INTEL_GUC_ACTION_DEALLOCATE_DOORBELL = 0x20,
- INTEL_GUC_ACTION_LOG_BUFFER_FILE_FLUSH_COMPLETE = 0x30,
- INTEL_GUC_ACTION_UK_LOG_ENABLE_LOGGING = 0x40,
- INTEL_GUC_ACTION_FORCE_LOG_BUFFER_FLUSH = 0x302,
- INTEL_GUC_ACTION_ENTER_S_STATE = 0x501,
- INTEL_GUC_ACTION_EXIT_S_STATE = 0x502,
- INTEL_GUC_ACTION_SLPC_REQUEST = 0x3003,
- INTEL_GUC_ACTION_AUTHENTICATE_HUC = 0x4000,
- INTEL_GUC_ACTION_REGISTER_COMMAND_TRANSPORT_BUFFER = 0x4505,
- INTEL_GUC_ACTION_DEREGISTER_COMMAND_TRANSPORT_BUFFER = 0x4506,
- INTEL_GUC_ACTION_LIMIT
-};
-
-enum intel_guc_preempt_options {
- INTEL_GUC_PREEMPT_OPTION_DROP_WORK_Q = 0x4,
- INTEL_GUC_PREEMPT_OPTION_DROP_SUBMIT_Q = 0x8,
-};
-
-enum intel_guc_report_status {
- INTEL_GUC_REPORT_STATUS_UNKNOWN = 0x0,
- INTEL_GUC_REPORT_STATUS_ACKED = 0x1,
- INTEL_GUC_REPORT_STATUS_ERROR = 0x2,
- INTEL_GUC_REPORT_STATUS_COMPLETE = 0x4,
-};
-
-enum intel_guc_sleep_state_status {
- INTEL_GUC_SLEEP_STATE_SUCCESS = 0x1,
- INTEL_GUC_SLEEP_STATE_PREEMPT_TO_IDLE_FAILED = 0x2,
- INTEL_GUC_SLEEP_STATE_ENGINE_RESET_FAILED = 0x3
-#define INTEL_GUC_SLEEP_STATE_INVALID_MASK 0x80000000
-};
-
-#define GUC_LOG_CONTROL_LOGGING_ENABLED (1 << 0)
-#define GUC_LOG_CONTROL_VERBOSITY_SHIFT 4
-#define GUC_LOG_CONTROL_VERBOSITY_MASK (0xF << GUC_LOG_CONTROL_VERBOSITY_SHIFT)
-#define GUC_LOG_CONTROL_DEFAULT_LOGGING (1 << 8)
-
-enum intel_guc_response_status {
- INTEL_GUC_RESPONSE_STATUS_SUCCESS = 0x0,
- INTEL_GUC_RESPONSE_STATUS_GENERIC_FAIL = 0xF000,
-};
-
#define INTEL_GUC_MSG_IS_RESPONSE_SUCCESS(m) \
(typecheck(u32, (m)) && \
((m) & (INTEL_GUC_MSG_TYPE_MASK | INTEL_GUC_MSG_CODE_MASK)) == \
--
2.28.0
WARNING: multiple messages have this Message-ID (diff)
From: Matthew Brost <matthew.brost@intel.com>
To: <intel-gfx@lists.freedesktop.org>, <dri-devel@lists.freedesktop.org>
Cc: jason.ekstrand@intel.com, daniel.vetter@intel.com
Subject: [Intel-gfx] [RFC PATCH 08/97] drm/i915/guc: Keep strict GuC ABI definitions
Date: Thu, 6 May 2021 12:13:22 -0700 [thread overview]
Message-ID: <20210506191451.77768-9-matthew.brost@intel.com> (raw)
In-Reply-To: <20210506191451.77768-1-matthew.brost@intel.com>
From: Michal Wajdeczko <michal.wajdeczko@intel.com>
Our fwif.h file is now mix of strict firmware ABI definitions and
set of our helpers. In anticipation of upcoming changes to the GuC
interface try to keep them separate in smaller maintainable files.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
---
.../gpu/drm/i915/gt/uc/abi/guc_actions_abi.h | 51 +++++
.../gt/uc/abi/guc_communication_ctb_abi.h | 106 +++++++++
.../gt/uc/abi/guc_communication_mmio_abi.h | 52 +++++
.../gpu/drm/i915/gt/uc/abi/guc_errors_abi.h | 14 ++
.../gpu/drm/i915/gt/uc/abi/guc_messages_abi.h | 21 ++
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h | 203 +-----------------
6 files changed, 250 insertions(+), 197 deletions(-)
create mode 100644 drivers/gpu/drm/i915/gt/uc/abi/guc_actions_abi.h
create mode 100644 drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h
create mode 100644 drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h
create mode 100644 drivers/gpu/drm/i915/gt/uc/abi/guc_errors_abi.h
create mode 100644 drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_actions_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_actions_abi.h
new file mode 100644
index 000000000000..90efef8a73e4
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_actions_abi.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2014-2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_ACTIONS_ABI_H
+#define _ABI_GUC_ACTIONS_ABI_H
+
+enum intel_guc_action {
+ INTEL_GUC_ACTION_DEFAULT = 0x0,
+ INTEL_GUC_ACTION_REQUEST_PREEMPTION = 0x2,
+ INTEL_GUC_ACTION_REQUEST_ENGINE_RESET = 0x3,
+ INTEL_GUC_ACTION_ALLOCATE_DOORBELL = 0x10,
+ INTEL_GUC_ACTION_DEALLOCATE_DOORBELL = 0x20,
+ INTEL_GUC_ACTION_LOG_BUFFER_FILE_FLUSH_COMPLETE = 0x30,
+ INTEL_GUC_ACTION_UK_LOG_ENABLE_LOGGING = 0x40,
+ INTEL_GUC_ACTION_FORCE_LOG_BUFFER_FLUSH = 0x302,
+ INTEL_GUC_ACTION_ENTER_S_STATE = 0x501,
+ INTEL_GUC_ACTION_EXIT_S_STATE = 0x502,
+ INTEL_GUC_ACTION_SLPC_REQUEST = 0x3003,
+ INTEL_GUC_ACTION_AUTHENTICATE_HUC = 0x4000,
+ INTEL_GUC_ACTION_REGISTER_COMMAND_TRANSPORT_BUFFER = 0x4505,
+ INTEL_GUC_ACTION_DEREGISTER_COMMAND_TRANSPORT_BUFFER = 0x4506,
+ INTEL_GUC_ACTION_LIMIT
+};
+
+enum intel_guc_preempt_options {
+ INTEL_GUC_PREEMPT_OPTION_DROP_WORK_Q = 0x4,
+ INTEL_GUC_PREEMPT_OPTION_DROP_SUBMIT_Q = 0x8,
+};
+
+enum intel_guc_report_status {
+ INTEL_GUC_REPORT_STATUS_UNKNOWN = 0x0,
+ INTEL_GUC_REPORT_STATUS_ACKED = 0x1,
+ INTEL_GUC_REPORT_STATUS_ERROR = 0x2,
+ INTEL_GUC_REPORT_STATUS_COMPLETE = 0x4,
+};
+
+enum intel_guc_sleep_state_status {
+ INTEL_GUC_SLEEP_STATE_SUCCESS = 0x1,
+ INTEL_GUC_SLEEP_STATE_PREEMPT_TO_IDLE_FAILED = 0x2,
+ INTEL_GUC_SLEEP_STATE_ENGINE_RESET_FAILED = 0x3
+#define INTEL_GUC_SLEEP_STATE_INVALID_MASK 0x80000000
+};
+
+#define GUC_LOG_CONTROL_LOGGING_ENABLED (1 << 0)
+#define GUC_LOG_CONTROL_VERBOSITY_SHIFT 4
+#define GUC_LOG_CONTROL_VERBOSITY_MASK (0xF << GUC_LOG_CONTROL_VERBOSITY_SHIFT)
+#define GUC_LOG_CONTROL_DEFAULT_LOGGING (1 << 8)
+
+#endif /* _ABI_GUC_ACTIONS_ABI_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h
new file mode 100644
index 000000000000..ebd8c3e0e4bb
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2014-2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_COMMUNICATION_CTB_ABI_H
+#define _ABI_GUC_COMMUNICATION_CTB_ABI_H
+
+#include <linux/types.h>
+
+/**
+ * DOC: CTB based communication
+ *
+ * The CTB (command transport buffer) communication between Host and GuC
+ * is based on u32 data stream written to the shared buffer. One buffer can
+ * be used to transmit data only in one direction (one-directional channel).
+ *
+ * Current status of the each buffer is stored in the buffer descriptor.
+ * Buffer descriptor holds tail and head fields that represents active data
+ * stream. The tail field is updated by the data producer (sender), and head
+ * field is updated by the data consumer (receiver)::
+ *
+ * +------------+
+ * | DESCRIPTOR | +=================+============+========+
+ * +============+ | | MESSAGE(s) | |
+ * | address |--------->+=================+============+========+
+ * +------------+
+ * | head | ^-----head--------^
+ * +------------+
+ * | tail | ^---------tail-----------------^
+ * +------------+
+ * | size | ^---------------size--------------------^
+ * +------------+
+ *
+ * Each message in data stream starts with the single u32 treated as a header,
+ * followed by optional set of u32 data that makes message specific payload::
+ *
+ * +------------+---------+---------+---------+
+ * | MESSAGE |
+ * +------------+---------+---------+---------+
+ * | msg[0] | [1] | ... | [n-1] |
+ * +------------+---------+---------+---------+
+ * | MESSAGE | MESSAGE PAYLOAD |
+ * + HEADER +---------+---------+---------+
+ * | | 0 | ... | n |
+ * +======+=====+=========+=========+=========+
+ * | 31:16| code| | | |
+ * +------+-----+ | | |
+ * | 15:5|flags| | | |
+ * +------+-----+ | | |
+ * | 4:0| len| | | |
+ * +------+-----+---------+---------+---------+
+ *
+ * ^-------------len-------------^
+ *
+ * The message header consists of:
+ *
+ * - **len**, indicates length of the message payload (in u32)
+ * - **code**, indicates message code
+ * - **flags**, holds various bits to control message handling
+ */
+
+/*
+ * Describes single command transport buffer.
+ * Used by both guc-master and clients.
+ */
+struct guc_ct_buffer_desc {
+ u32 addr; /* gfx address */
+ u64 host_private; /* host private data */
+ u32 size; /* size in bytes */
+ u32 head; /* offset updated by GuC*/
+ u32 tail; /* offset updated by owner */
+ u32 is_in_error; /* error indicator */
+ u32 fence; /* fence updated by GuC */
+ u32 status; /* status updated by GuC */
+ u32 owner; /* id of the channel owner */
+ u32 owner_sub_id; /* owner-defined field for extra tracking */
+ u32 reserved[5];
+} __packed;
+
+/* Type of command transport buffer */
+#define INTEL_GUC_CT_BUFFER_TYPE_SEND 0x0u
+#define INTEL_GUC_CT_BUFFER_TYPE_RECV 0x1u
+
+/*
+ * Definition of the command transport message header (DW0)
+ *
+ * bit[4..0] message len (in dwords)
+ * bit[7..5] reserved
+ * bit[8] response (G2H only)
+ * bit[8] write fence to desc (H2G only)
+ * bit[9] write status to H2G buff (H2G only)
+ * bit[10] send status back via G2H (H2G only)
+ * bit[15..11] reserved
+ * bit[31..16] action code
+ */
+#define GUC_CT_MSG_LEN_SHIFT 0
+#define GUC_CT_MSG_LEN_MASK 0x1F
+#define GUC_CT_MSG_IS_RESPONSE (1 << 8)
+#define GUC_CT_MSG_WRITE_FENCE_TO_DESC (1 << 8)
+#define GUC_CT_MSG_WRITE_STATUS_TO_BUFF (1 << 9)
+#define GUC_CT_MSG_SEND_STATUS (1 << 10)
+#define GUC_CT_MSG_ACTION_SHIFT 16
+#define GUC_CT_MSG_ACTION_MASK 0xFFFF
+
+#endif /* _ABI_GUC_COMMUNICATION_CTB_ABI_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h
new file mode 100644
index 000000000000..be066a62e9e0
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2014-2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_COMMUNICATION_MMIO_ABI_H
+#define _ABI_GUC_COMMUNICATION_MMIO_ABI_H
+
+/**
+ * DOC: MMIO based communication
+ *
+ * The MMIO based communication between Host and GuC uses software scratch
+ * registers, where first register holds data treated as message header,
+ * and other registers are used to hold message payload.
+ *
+ * For Gen9+, GuC uses software scratch registers 0xC180-0xC1B8,
+ * but no H2G command takes more than 8 parameters and the GuC FW
+ * itself uses an 8-element array to store the H2G message.
+ *
+ * +-----------+---------+---------+---------+
+ * | MMIO[0] | MMIO[1] | ... | MMIO[n] |
+ * +-----------+---------+---------+---------+
+ * | header | optional payload |
+ * +======+====+=========+=========+=========+
+ * | 31:28|type| | | |
+ * +------+----+ | | |
+ * | 27:16|data| | | |
+ * +------+----+ | | |
+ * | 15:0|code| | | |
+ * +------+----+---------+---------+---------+
+ *
+ * The message header consists of:
+ *
+ * - **type**, indicates message type
+ * - **code**, indicates message code, is specific for **type**
+ * - **data**, indicates message data, optional, depends on **code**
+ *
+ * The following message **types** are supported:
+ *
+ * - **REQUEST**, indicates Host-to-GuC request, requested GuC action code
+ * must be priovided in **code** field. Optional action specific parameters
+ * can be provided in remaining payload registers or **data** field.
+ *
+ * - **RESPONSE**, indicates GuC-to-Host response from earlier GuC request,
+ * action response status will be provided in **code** field. Optional
+ * response data can be returned in remaining payload registers or **data**
+ * field.
+ */
+
+#define GUC_MAX_MMIO_MSG_LEN 8
+
+#endif /* _ABI_GUC_COMMUNICATION_MMIO_ABI_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_errors_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_errors_abi.h
new file mode 100644
index 000000000000..488b6061ee89
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_errors_abi.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2014-2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_ERRORS_ABI_H
+#define _ABI_GUC_ERRORS_ABI_H
+
+enum intel_guc_response_status {
+ INTEL_GUC_RESPONSE_STATUS_SUCCESS = 0x0,
+ INTEL_GUC_RESPONSE_STATUS_GENERIC_FAIL = 0xF000,
+};
+
+#endif /* _ABI_GUC_ERRORS_ABI_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
new file mode 100644
index 000000000000..775e21f3058c
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2014-2021 Intel Corporation
+ */
+
+#ifndef _ABI_GUC_MESSAGES_ABI_H
+#define _ABI_GUC_MESSAGES_ABI_H
+
+#define INTEL_GUC_MSG_TYPE_SHIFT 28
+#define INTEL_GUC_MSG_TYPE_MASK (0xF << INTEL_GUC_MSG_TYPE_SHIFT)
+#define INTEL_GUC_MSG_DATA_SHIFT 16
+#define INTEL_GUC_MSG_DATA_MASK (0xFFF << INTEL_GUC_MSG_DATA_SHIFT)
+#define INTEL_GUC_MSG_CODE_SHIFT 0
+#define INTEL_GUC_MSG_CODE_MASK (0xFFFF << INTEL_GUC_MSG_CODE_SHIFT)
+
+enum intel_guc_msg_type {
+ INTEL_GUC_MSG_TYPE_REQUEST = 0x0,
+ INTEL_GUC_MSG_TYPE_RESPONSE = 0xF,
+};
+
+#endif /* _ABI_GUC_MESSAGES_ABI_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h b/drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h
index 0f9afcde1d0b..9bf35240e723 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h
@@ -10,6 +10,12 @@
#include <linux/compiler.h>
#include <linux/types.h>
+#include "abi/guc_actions_abi.h"
+#include "abi/guc_errors_abi.h"
+#include "abi/guc_communication_mmio_abi.h"
+#include "abi/guc_communication_ctb_abi.h"
+#include "abi/guc_messages_abi.h"
+
#define GUC_CLIENT_PRIORITY_KMD_HIGH 0
#define GUC_CLIENT_PRIORITY_HIGH 1
#define GUC_CLIENT_PRIORITY_KMD_NORMAL 2
@@ -207,101 +213,6 @@ struct guc_stage_desc {
u64 desc_private;
} __packed;
-/**
- * DOC: CTB based communication
- *
- * The CTB (command transport buffer) communication between Host and GuC
- * is based on u32 data stream written to the shared buffer. One buffer can
- * be used to transmit data only in one direction (one-directional channel).
- *
- * Current status of the each buffer is stored in the buffer descriptor.
- * Buffer descriptor holds tail and head fields that represents active data
- * stream. The tail field is updated by the data producer (sender), and head
- * field is updated by the data consumer (receiver)::
- *
- * +------------+
- * | DESCRIPTOR | +=================+============+========+
- * +============+ | | MESSAGE(s) | |
- * | address |--------->+=================+============+========+
- * +------------+
- * | head | ^-----head--------^
- * +------------+
- * | tail | ^---------tail-----------------^
- * +------------+
- * | size | ^---------------size--------------------^
- * +------------+
- *
- * Each message in data stream starts with the single u32 treated as a header,
- * followed by optional set of u32 data that makes message specific payload::
- *
- * +------------+---------+---------+---------+
- * | MESSAGE |
- * +------------+---------+---------+---------+
- * | msg[0] | [1] | ... | [n-1] |
- * +------------+---------+---------+---------+
- * | MESSAGE | MESSAGE PAYLOAD |
- * + HEADER +---------+---------+---------+
- * | | 0 | ... | n |
- * +======+=====+=========+=========+=========+
- * | 31:16| code| | | |
- * +------+-----+ | | |
- * | 15:5|flags| | | |
- * +------+-----+ | | |
- * | 4:0| len| | | |
- * +------+-----+---------+---------+---------+
- *
- * ^-------------len-------------^
- *
- * The message header consists of:
- *
- * - **len**, indicates length of the message payload (in u32)
- * - **code**, indicates message code
- * - **flags**, holds various bits to control message handling
- */
-
-/*
- * Describes single command transport buffer.
- * Used by both guc-master and clients.
- */
-struct guc_ct_buffer_desc {
- u32 addr; /* gfx address */
- u64 host_private; /* host private data */
- u32 size; /* size in bytes */
- u32 head; /* offset updated by GuC*/
- u32 tail; /* offset updated by owner */
- u32 is_in_error; /* error indicator */
- u32 fence; /* fence updated by GuC */
- u32 status; /* status updated by GuC */
- u32 owner; /* id of the channel owner */
- u32 owner_sub_id; /* owner-defined field for extra tracking */
- u32 reserved[5];
-} __packed;
-
-/* Type of command transport buffer */
-#define INTEL_GUC_CT_BUFFER_TYPE_SEND 0x0u
-#define INTEL_GUC_CT_BUFFER_TYPE_RECV 0x1u
-
-/*
- * Definition of the command transport message header (DW0)
- *
- * bit[4..0] message len (in dwords)
- * bit[7..5] reserved
- * bit[8] response (G2H only)
- * bit[8] write fence to desc (H2G only)
- * bit[9] write status to H2G buff (H2G only)
- * bit[10] send status back via G2H (H2G only)
- * bit[15..11] reserved
- * bit[31..16] action code
- */
-#define GUC_CT_MSG_LEN_SHIFT 0
-#define GUC_CT_MSG_LEN_MASK 0x1F
-#define GUC_CT_MSG_IS_RESPONSE (1 << 8)
-#define GUC_CT_MSG_WRITE_FENCE_TO_DESC (1 << 8)
-#define GUC_CT_MSG_WRITE_STATUS_TO_BUFF (1 << 9)
-#define GUC_CT_MSG_SEND_STATUS (1 << 10)
-#define GUC_CT_MSG_ACTION_SHIFT 16
-#define GUC_CT_MSG_ACTION_MASK 0xFFFF
-
#define GUC_POWER_UNSPECIFIED 0
#define GUC_POWER_D0 1
#define GUC_POWER_D1 2
@@ -477,119 +388,17 @@ struct guc_shared_ctx_data {
struct guc_ctx_report preempt_ctx_report[GUC_MAX_ENGINES_NUM];
} __packed;
-/**
- * DOC: MMIO based communication
- *
- * The MMIO based communication between Host and GuC uses software scratch
- * registers, where first register holds data treated as message header,
- * and other registers are used to hold message payload.
- *
- * For Gen9+, GuC uses software scratch registers 0xC180-0xC1B8,
- * but no H2G command takes more than 8 parameters and the GuC FW
- * itself uses an 8-element array to store the H2G message.
- *
- * +-----------+---------+---------+---------+
- * | MMIO[0] | MMIO[1] | ... | MMIO[n] |
- * +-----------+---------+---------+---------+
- * | header | optional payload |
- * +======+====+=========+=========+=========+
- * | 31:28|type| | | |
- * +------+----+ | | |
- * | 27:16|data| | | |
- * +------+----+ | | |
- * | 15:0|code| | | |
- * +------+----+---------+---------+---------+
- *
- * The message header consists of:
- *
- * - **type**, indicates message type
- * - **code**, indicates message code, is specific for **type**
- * - **data**, indicates message data, optional, depends on **code**
- *
- * The following message **types** are supported:
- *
- * - **REQUEST**, indicates Host-to-GuC request, requested GuC action code
- * must be priovided in **code** field. Optional action specific parameters
- * can be provided in remaining payload registers or **data** field.
- *
- * - **RESPONSE**, indicates GuC-to-Host response from earlier GuC request,
- * action response status will be provided in **code** field. Optional
- * response data can be returned in remaining payload registers or **data**
- * field.
- */
-
-#define GUC_MAX_MMIO_MSG_LEN 8
-
-#define INTEL_GUC_MSG_TYPE_SHIFT 28
-#define INTEL_GUC_MSG_TYPE_MASK (0xF << INTEL_GUC_MSG_TYPE_SHIFT)
-#define INTEL_GUC_MSG_DATA_SHIFT 16
-#define INTEL_GUC_MSG_DATA_MASK (0xFFF << INTEL_GUC_MSG_DATA_SHIFT)
-#define INTEL_GUC_MSG_CODE_SHIFT 0
-#define INTEL_GUC_MSG_CODE_MASK (0xFFFF << INTEL_GUC_MSG_CODE_SHIFT)
-
#define __INTEL_GUC_MSG_GET(T, m) \
(((m) & INTEL_GUC_MSG_ ## T ## _MASK) >> INTEL_GUC_MSG_ ## T ## _SHIFT)
#define INTEL_GUC_MSG_TO_TYPE(m) __INTEL_GUC_MSG_GET(TYPE, m)
#define INTEL_GUC_MSG_TO_DATA(m) __INTEL_GUC_MSG_GET(DATA, m)
#define INTEL_GUC_MSG_TO_CODE(m) __INTEL_GUC_MSG_GET(CODE, m)
-enum intel_guc_msg_type {
- INTEL_GUC_MSG_TYPE_REQUEST = 0x0,
- INTEL_GUC_MSG_TYPE_RESPONSE = 0xF,
-};
-
#define __INTEL_GUC_MSG_TYPE_IS(T, m) \
(INTEL_GUC_MSG_TO_TYPE(m) == INTEL_GUC_MSG_TYPE_ ## T)
#define INTEL_GUC_MSG_IS_REQUEST(m) __INTEL_GUC_MSG_TYPE_IS(REQUEST, m)
#define INTEL_GUC_MSG_IS_RESPONSE(m) __INTEL_GUC_MSG_TYPE_IS(RESPONSE, m)
-enum intel_guc_action {
- INTEL_GUC_ACTION_DEFAULT = 0x0,
- INTEL_GUC_ACTION_REQUEST_PREEMPTION = 0x2,
- INTEL_GUC_ACTION_REQUEST_ENGINE_RESET = 0x3,
- INTEL_GUC_ACTION_ALLOCATE_DOORBELL = 0x10,
- INTEL_GUC_ACTION_DEALLOCATE_DOORBELL = 0x20,
- INTEL_GUC_ACTION_LOG_BUFFER_FILE_FLUSH_COMPLETE = 0x30,
- INTEL_GUC_ACTION_UK_LOG_ENABLE_LOGGING = 0x40,
- INTEL_GUC_ACTION_FORCE_LOG_BUFFER_FLUSH = 0x302,
- INTEL_GUC_ACTION_ENTER_S_STATE = 0x501,
- INTEL_GUC_ACTION_EXIT_S_STATE = 0x502,
- INTEL_GUC_ACTION_SLPC_REQUEST = 0x3003,
- INTEL_GUC_ACTION_AUTHENTICATE_HUC = 0x4000,
- INTEL_GUC_ACTION_REGISTER_COMMAND_TRANSPORT_BUFFER = 0x4505,
- INTEL_GUC_ACTION_DEREGISTER_COMMAND_TRANSPORT_BUFFER = 0x4506,
- INTEL_GUC_ACTION_LIMIT
-};
-
-enum intel_guc_preempt_options {
- INTEL_GUC_PREEMPT_OPTION_DROP_WORK_Q = 0x4,
- INTEL_GUC_PREEMPT_OPTION_DROP_SUBMIT_Q = 0x8,
-};
-
-enum intel_guc_report_status {
- INTEL_GUC_REPORT_STATUS_UNKNOWN = 0x0,
- INTEL_GUC_REPORT_STATUS_ACKED = 0x1,
- INTEL_GUC_REPORT_STATUS_ERROR = 0x2,
- INTEL_GUC_REPORT_STATUS_COMPLETE = 0x4,
-};
-
-enum intel_guc_sleep_state_status {
- INTEL_GUC_SLEEP_STATE_SUCCESS = 0x1,
- INTEL_GUC_SLEEP_STATE_PREEMPT_TO_IDLE_FAILED = 0x2,
- INTEL_GUC_SLEEP_STATE_ENGINE_RESET_FAILED = 0x3
-#define INTEL_GUC_SLEEP_STATE_INVALID_MASK 0x80000000
-};
-
-#define GUC_LOG_CONTROL_LOGGING_ENABLED (1 << 0)
-#define GUC_LOG_CONTROL_VERBOSITY_SHIFT 4
-#define GUC_LOG_CONTROL_VERBOSITY_MASK (0xF << GUC_LOG_CONTROL_VERBOSITY_SHIFT)
-#define GUC_LOG_CONTROL_DEFAULT_LOGGING (1 << 8)
-
-enum intel_guc_response_status {
- INTEL_GUC_RESPONSE_STATUS_SUCCESS = 0x0,
- INTEL_GUC_RESPONSE_STATUS_GENERIC_FAIL = 0xF000,
-};
-
#define INTEL_GUC_MSG_IS_RESPONSE_SUCCESS(m) \
(typecheck(u32, (m)) && \
((m) & (INTEL_GUC_MSG_TYPE_MASK | INTEL_GUC_MSG_CODE_MASK)) == \
--
2.28.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-05-06 18:58 UTC|newest]
Thread overview: 504+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-06 19:13 [RFC PATCH 00/97] Basic GuC submission support in the i915 Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:12 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for " Patchwork
2021-05-06 19:13 ` [RFC PATCH 01/97] drm/i915/gt: Move engine setup out of set_default_submission Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-19 0:25 ` Matthew Brost
2021-05-19 0:25 ` [Intel-gfx] " Matthew Brost
2021-05-25 8:44 ` Tvrtko Ursulin
2021-05-25 8:44 ` Tvrtko Ursulin
2021-05-06 19:13 ` [RFC PATCH 02/97] drm/i915/gt: Move submission_method into intel_gt Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-19 3:10 ` Matthew Brost
2021-05-19 3:10 ` [Intel-gfx] " Matthew Brost
2021-05-25 8:44 ` Tvrtko Ursulin
2021-05-25 8:44 ` Tvrtko Ursulin
2021-05-06 19:13 ` [RFC PATCH 03/97] drm/i915/gt: Move CS interrupt handler to the backend Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-19 3:31 ` Matthew Brost
2021-05-19 3:31 ` [Intel-gfx] " Matthew Brost
2021-05-25 8:45 ` Tvrtko Ursulin
2021-05-25 8:45 ` Tvrtko Ursulin
2021-05-06 19:13 ` [RFC PATCH 04/97] drm/i915/guc: skip disabling CTBs before sanitizing the GuC Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-20 16:47 ` Matthew Brost
2021-05-20 16:47 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 05/97] drm/i915/guc: use probe_error log for CT enablement failure Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-24 10:30 ` Michal Wajdeczko
2021-05-24 10:30 ` [Intel-gfx] " Michal Wajdeczko
2021-05-06 19:13 ` [RFC PATCH 06/97] drm/i915/guc: enable only the user interrupt when using GuC submission Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 0:31 ` Matthew Brost
2021-05-25 0:31 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 07/97] drm/i915/guc: Remove sample_forcewake h2g action Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-24 10:48 ` Michal Wajdeczko
2021-05-24 10:48 ` [Intel-gfx] " Michal Wajdeczko
2021-05-25 0:36 ` Matthew Brost
2021-05-25 0:36 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` Matthew Brost [this message]
2021-05-06 19:13 ` [Intel-gfx] [RFC PATCH 08/97] drm/i915/guc: Keep strict GuC ABI definitions Matthew Brost
2021-05-24 23:52 ` Michał Winiarski
2021-05-24 23:52 ` [Intel-gfx] " Michał Winiarski
2021-05-06 19:13 ` [RFC PATCH 09/97] drm/i915/guc: Stop using fence/status from CTB descriptor Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 2:38 ` Matthew Brost
2021-05-25 2:38 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 10/97] drm/i915: Promote ptrdiff() to i915_utils.h Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 0:42 ` Matthew Brost
2021-05-25 0:42 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 11/97] drm/i915/guc: Only rely on own CTB size Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 2:47 ` Matthew Brost
2021-05-25 2:47 ` [Intel-gfx] " Matthew Brost
2021-05-25 12:48 ` Michal Wajdeczko
2021-05-25 12:48 ` Michal Wajdeczko
2021-05-06 19:13 ` [RFC PATCH 12/97] drm/i915/guc: Don't repeat CTB layout calculations Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 2:53 ` Matthew Brost
2021-05-25 2:53 ` [Intel-gfx] " Matthew Brost
2021-05-25 13:07 ` Michal Wajdeczko
2021-05-25 13:07 ` [Intel-gfx] " Michal Wajdeczko
2021-05-25 16:56 ` Matthew Brost
2021-05-25 16:56 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 13/97] drm/i915/guc: Replace CTB array with explicit members Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 3:15 ` Matthew Brost
2021-05-25 3:15 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 14/97] drm/i915/guc: Update sizes of CTB buffers Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 2:56 ` Matthew Brost
2021-05-25 2:56 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 15/97] drm/i915/guc: Relax CTB response timeout Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 18:08 ` Matthew Brost
2021-05-25 18:08 ` [Intel-gfx] " Matthew Brost
2021-05-25 19:37 ` Michal Wajdeczko
2021-05-25 19:37 ` Michal Wajdeczko
2021-05-06 19:13 ` [RFC PATCH 16/97] drm/i915/guc: Start protecting access to CTB descriptors Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 3:21 ` Matthew Brost
2021-05-25 3:21 ` [Intel-gfx] " Matthew Brost
2021-05-25 13:10 ` Michal Wajdeczko
2021-05-25 3:21 ` Matthew Brost
2021-05-25 3:21 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 17/97] drm/i915/guc: Stop using mutex while sending CTB messages Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 16:14 ` Matthew Brost
2021-05-25 16:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 18/97] drm/i915/guc: Don't receive all G2H messages in irq handler Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 18:15 ` Matthew Brost
2021-05-25 18:15 ` [Intel-gfx] " Matthew Brost
2021-05-25 19:43 ` Michal Wajdeczko
2021-05-25 19:43 ` Michal Wajdeczko
2021-05-06 19:13 ` [RFC PATCH 19/97] drm/i915/guc: Always copy CT message to new allocation Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 18:25 ` Matthew Brost
2021-05-25 18:25 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 20/97] drm/i915/guc: Introduce unified HXG messages Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-11 15:16 ` Daniel Vetter
2021-05-11 15:16 ` [Intel-gfx] " Daniel Vetter
2021-05-11 17:59 ` Matthew Brost
2021-05-11 17:59 ` [Intel-gfx] " Matthew Brost
2021-05-11 22:11 ` Michal Wajdeczko
2021-05-11 22:11 ` [Intel-gfx] " Michal Wajdeczko
2021-05-12 8:40 ` Daniel Vetter
2021-05-12 8:40 ` [Intel-gfx] " Daniel Vetter
2021-05-06 19:13 ` [RFC PATCH 21/97] drm/i915/guc: Update MMIO based communication Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 22/97] drm/i915/guc: Update CTB response status Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 23/97] drm/i915/guc: Support per context scheduling policies Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 1:15 ` Matthew Brost
2021-05-25 1:15 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 24/97] drm/i915/guc: Add flag for mark broken CTB Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-27 19:44 ` Matthew Brost
2021-05-27 19:44 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 25/97] drm/i915/guc: New definition of the CTB descriptor Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 26/97] drm/i915/guc: New definition of the CTB registration action Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 27/97] drm/i915/guc: New CTB based communication Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 28/97] drm/i915/guc: Kill guc_clients.ct_pool Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 1:01 ` Matthew Brost
2021-05-25 1:01 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 29/97] drm/i915/guc: Update firmware to v60.1.2 Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 30/97] drm/i915/uc: turn on GuC/HuC auto mode by default Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-24 11:00 ` Michal Wajdeczko
2021-05-24 11:00 ` [Intel-gfx] " Michal Wajdeczko
2021-05-06 19:13 ` [RFC PATCH 31/97] drm/i915/guc: Early initialization of GuC send registers Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-26 20:28 ` Matthew Brost
2021-05-26 20:28 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 32/97] drm/i915: Introduce i915_sched_engine object Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-11 15:18 ` Daniel Vetter
2021-05-11 15:18 ` [Intel-gfx] " Daniel Vetter
2021-05-11 17:56 ` Matthew Brost
2021-05-11 17:56 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 33/97] drm/i915: Engine relative MMIO Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 9:05 ` Tvrtko Ursulin
2021-05-25 9:05 ` Tvrtko Ursulin
2021-05-06 19:13 ` [RFC PATCH 34/97] drm/i915/guc: Use guc_class instead of engine_class in fw interface Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-26 20:41 ` Matthew Brost
2021-05-26 20:41 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 35/97] drm/i915/guc: Improve error message for unsolicited CT response Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-24 11:59 ` Michal Wajdeczko
2021-05-24 11:59 ` [Intel-gfx] " Michal Wajdeczko
2021-05-25 17:32 ` Matthew Brost
2021-05-25 17:32 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 36/97] drm/i915/guc: Add non blocking CTB send function Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-24 12:21 ` Michal Wajdeczko
2021-05-24 12:21 ` [Intel-gfx] " Michal Wajdeczko
2021-05-25 17:30 ` Matthew Brost
2021-05-25 17:30 ` [Intel-gfx] " Matthew Brost
2021-05-25 9:21 ` Tvrtko Ursulin
2021-05-25 9:21 ` Tvrtko Ursulin
2021-05-25 17:21 ` Matthew Brost
2021-05-25 17:21 ` Matthew Brost
2021-05-26 8:57 ` Tvrtko Ursulin
2021-05-26 8:57 ` Tvrtko Ursulin
2021-05-26 18:10 ` Matthew Brost
2021-05-26 18:10 ` Matthew Brost
2021-05-27 10:02 ` Tvrtko Ursulin
2021-05-27 10:02 ` Tvrtko Ursulin
2021-05-27 14:35 ` Matthew Brost
2021-05-27 14:35 ` Matthew Brost
2021-05-27 15:11 ` Tvrtko Ursulin
2021-05-27 15:11 ` Tvrtko Ursulin
2021-06-07 17:31 ` Matthew Brost
2021-06-07 17:31 ` Matthew Brost
2021-06-08 8:39 ` Tvrtko Ursulin
2021-06-08 8:39 ` Tvrtko Ursulin
2021-06-08 8:46 ` Daniel Vetter
2021-06-08 8:46 ` Daniel Vetter
2021-06-09 23:10 ` Matthew Brost
2021-06-09 23:10 ` Matthew Brost
2021-06-10 15:27 ` Daniel Vetter
2021-06-10 15:27 ` Daniel Vetter
2021-06-24 16:38 ` Matthew Brost
2021-06-24 16:38 ` Matthew Brost
2021-06-24 17:25 ` Daniel Vetter
2021-06-24 17:25 ` Daniel Vetter
2021-06-09 13:58 ` Michal Wajdeczko
2021-06-09 13:58 ` Michal Wajdeczko
2021-06-09 23:05 ` Matthew Brost
2021-06-09 23:05 ` Matthew Brost
2021-06-09 14:14 ` Michal Wajdeczko
2021-06-09 14:14 ` Michal Wajdeczko
2021-06-09 23:13 ` Matthew Brost
2021-06-09 23:13 ` Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 37/97] drm/i915/guc: Add stall timer to " Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-24 12:58 ` Michal Wajdeczko
2021-05-24 12:58 ` [Intel-gfx] " Michal Wajdeczko
2021-05-24 18:35 ` Matthew Brost
2021-05-24 18:35 ` [Intel-gfx] " Matthew Brost
2021-05-25 14:15 ` Michal Wajdeczko
2021-05-25 14:15 ` [Intel-gfx] " Michal Wajdeczko
2021-05-25 16:54 ` Matthew Brost
2021-05-25 16:54 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 38/97] drm/i915/guc: Optimize CTB writes and reads Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-24 13:31 ` Michal Wajdeczko
2021-05-24 13:31 ` [Intel-gfx] " Michal Wajdeczko
2021-05-25 17:39 ` Matthew Brost
2021-05-25 17:39 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 39/97] drm/i915/guc: Increase size of CTB buffers Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-24 13:43 ` Michal Wajdeczko
2021-05-24 13:43 ` Michal Wajdeczko
2021-05-24 18:40 ` Matthew Brost
2021-05-24 18:40 ` Matthew Brost
2021-05-25 9:24 ` Tvrtko Ursulin
2021-05-25 9:24 ` Tvrtko Ursulin
2021-05-25 17:15 ` Matthew Brost
2021-05-25 17:15 ` Matthew Brost
2021-05-26 9:30 ` Tvrtko Ursulin
2021-05-26 9:30 ` Tvrtko Ursulin
2021-05-26 18:20 ` Matthew Brost
2021-05-26 18:20 ` Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 40/97] drm/i915/guc: Module load failure test for CT buffer creation Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-24 13:45 ` Michal Wajdeczko
2021-05-24 13:45 ` [Intel-gfx] " Michal Wajdeczko
2021-05-06 19:13 ` [RFC PATCH 41/97] drm/i915/guc: Add new GuC interface defines and structures Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 42/97] drm/i915/guc: Remove GuC stage descriptor, add lrc descriptor Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 43/97] drm/i915/guc: Add lrc descriptor context lookup array Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-11 15:26 ` Daniel Vetter
2021-05-11 15:26 ` [Intel-gfx] " Daniel Vetter
2021-05-11 17:01 ` Matthew Brost
2021-05-11 17:01 ` [Intel-gfx] " Matthew Brost
2021-05-11 17:43 ` Daniel Vetter
2021-05-11 17:43 ` [Intel-gfx] " Daniel Vetter
2021-05-11 19:34 ` Matthew Brost
2021-05-11 19:34 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 44/97] drm/i915/guc: Implement GuC submission tasklet Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-25 9:43 ` Tvrtko Ursulin
2021-05-25 9:43 ` Tvrtko Ursulin
2021-05-25 17:10 ` Matthew Brost
2021-05-25 17:10 ` Matthew Brost
2021-05-06 19:13 ` [RFC PATCH 45/97] drm/i915/guc: Add bypass tasklet submission path to GuC Matthew Brost
2021-05-06 19:13 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 46/97] drm/i915/guc: Implement GuC context operations for new inteface Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-29 20:32 ` Michal Wajdeczko
2021-05-29 20:32 ` [Intel-gfx] " Michal Wajdeczko
2021-05-06 19:14 ` [RFC PATCH 47/97] drm/i915/guc: Insert fence on context when deregistering Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 48/97] drm/i915/guc: Defer context unpin until scheduling is disabled Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 49/97] drm/i915/guc: Disable engine barriers with GuC during unpin Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-11 15:37 ` Daniel Vetter
2021-05-11 15:37 ` [Intel-gfx] " Daniel Vetter
2021-05-11 16:31 ` Matthew Brost
2021-05-11 16:31 ` [Intel-gfx] " Matthew Brost
2021-05-26 10:26 ` Tvrtko Ursulin
2021-05-26 10:26 ` Tvrtko Ursulin
2021-05-06 19:14 ` [RFC PATCH 50/97] drm/i915/guc: Extend deregistration fence to schedule disable Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 51/97] drm/i915: Disable preempt busywait when using GuC scheduling Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 52/97] drm/i915/guc: Ensure request ordering via completion fences Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 53/97] drm/i915/guc: Disable semaphores when using GuC scheduling Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-25 9:52 ` Tvrtko Ursulin
2021-05-25 9:52 ` Tvrtko Ursulin
2021-05-25 17:01 ` Matthew Brost
2021-05-25 17:01 ` Matthew Brost
2021-05-26 9:25 ` Tvrtko Ursulin
2021-05-26 9:25 ` Tvrtko Ursulin
2021-05-26 18:15 ` Matthew Brost
2021-05-26 18:15 ` Matthew Brost
2021-05-27 8:41 ` Tvrtko Ursulin
2021-05-27 8:41 ` Tvrtko Ursulin
2021-05-27 14:38 ` Matthew Brost
2021-05-27 14:38 ` Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 54/97] drm/i915/guc: Ensure G2H response has space in buffer Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 55/97] drm/i915/guc: Update intel_gt_wait_for_idle to work with GuC Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-07 5:56 ` kernel test robot
2021-05-25 10:06 ` Tvrtko Ursulin
2021-05-25 10:06 ` Tvrtko Ursulin
2021-05-25 17:07 ` Matthew Brost
2021-05-25 17:07 ` Matthew Brost
2021-05-26 9:21 ` Tvrtko Ursulin
2021-05-26 9:21 ` Tvrtko Ursulin
2021-05-26 18:18 ` Matthew Brost
2021-05-26 18:18 ` Matthew Brost
2021-05-27 9:02 ` Tvrtko Ursulin
2021-05-27 9:02 ` Tvrtko Ursulin
2021-05-27 14:37 ` Matthew Brost
2021-05-27 14:37 ` Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 56/97] drm/i915/guc: Update GuC debugfs to support new GuC Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 57/97] drm/i915/guc: Add several request trace points Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 58/97] drm/i915: Add intel_context tracing Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 59/97] drm/i915/guc: GuC virtual engines Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 60/97] drm/i915: Track 'serial' counts for " Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-25 10:16 ` Tvrtko Ursulin
2021-05-25 10:16 ` Tvrtko Ursulin
2021-05-25 17:52 ` Matthew Brost
2021-05-25 17:52 ` Matthew Brost
2021-05-26 8:40 ` Tvrtko Ursulin
2021-05-26 8:40 ` Tvrtko Ursulin
2021-05-26 18:45 ` John Harrison
2021-05-26 18:45 ` John Harrison
2021-05-27 8:53 ` Tvrtko Ursulin
2021-05-27 8:53 ` Tvrtko Ursulin
2021-05-27 17:01 ` John Harrison
2021-05-27 17:01 ` John Harrison
2021-06-01 9:31 ` Tvrtko Ursulin
2021-06-01 9:31 ` Tvrtko Ursulin
2021-06-02 1:20 ` John Harrison
2021-06-02 1:20 ` John Harrison
2021-06-02 12:04 ` Tvrtko Ursulin
2021-06-02 12:04 ` Tvrtko Ursulin
2021-06-02 12:09 ` Tvrtko Ursulin
2021-06-02 12:09 ` Tvrtko Ursulin
2021-05-06 19:14 ` [RFC PATCH 61/97] drm/i915: Hold reference to intel_context over life of i915_request Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-06-02 12:18 ` Tvrtko Ursulin
2021-06-02 12:18 ` Tvrtko Ursulin
2021-05-06 19:14 ` [RFC PATCH 62/97] drm/i915/guc: Disable bonding extension with GuC submission Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 63/97] drm/i915/guc: Direct all breadcrumbs for a class to single breadcrumbs Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-06-02 13:31 ` Tvrtko Ursulin
2021-06-02 13:31 ` Tvrtko Ursulin
2021-05-06 19:14 ` [RFC PATCH 64/97] drm/i915/guc: Reset implementation for new GuC interface Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-06-02 14:33 ` Tvrtko Ursulin
2021-06-02 14:33 ` Tvrtko Ursulin
2021-06-04 3:17 ` Matthew Brost
2021-06-04 3:17 ` Matthew Brost
2021-06-04 8:16 ` Daniel Vetter
2021-06-04 8:16 ` Daniel Vetter
2021-06-04 18:02 ` Matthew Brost
2021-06-04 18:02 ` Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 65/97] drm/i915: Reset GPU immediately if submission is disabled Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-06-02 14:36 ` Tvrtko Ursulin
2021-06-02 14:36 ` Tvrtko Ursulin
2021-05-06 19:14 ` [RFC PATCH 66/97] drm/i915/guc: Add disable interrupts to guc sanitize Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-11 8:16 ` [drm/i915/guc] 07336fb545: WARNING:at_drivers/gpu/drm/i915/gt/uc/intel_uc.c:#__uc_sanitize[i915] kernel test robot
2021-05-11 8:16 ` kernel test robot
2021-05-11 8:16 ` [Intel-gfx] " kernel test robot
2021-05-11 8:16 ` kernel test robot
2021-05-06 19:14 ` [RFC PATCH 67/97] drm/i915/guc: Suspend/resume implementation for new interface Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 68/97] drm/i915/guc: Handle context reset notification Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-11 16:25 ` Daniel Vetter
2021-05-11 16:25 ` Daniel Vetter
2021-05-06 19:14 ` [RFC PATCH 69/97] drm/i915/guc: Handle engine reset failure notification Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 70/97] drm/i915/guc: Enable the timer expired interrupt for GuC Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 71/97] drm/i915/guc: Provide mmio list to be saved/restored on engine reset Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 72/97] drm/i915/guc: Don't complain about reset races Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 73/97] drm/i915/guc: Enable GuC engine reset Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 74/97] drm/i915/guc: Capture error state on context reset Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-11 16:28 ` Daniel Vetter
2021-05-11 16:28 ` Daniel Vetter
2021-05-11 17:12 ` Matthew Brost
2021-05-11 17:12 ` Matthew Brost
2021-05-11 17:45 ` Daniel Vetter
2021-05-11 17:45 ` Daniel Vetter
2021-05-06 19:14 ` [RFC PATCH 75/97] drm/i915/guc: Fix for error capture after full GPU reset with GuC Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 76/97] drm/i915/guc: Hook GuC scheduling policies up Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 77/97] drm/i915/guc: Connect reset modparam updates to GuC policy flags Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 78/97] drm/i915/guc: Include scheduling policies in the debugfs state dump Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 79/97] drm/i915/guc: Don't call ring_is_idle in GuC submission Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 80/97] drm/i915/guc: Implement banned contexts for " Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 81/97] drm/i915/guc: Allow flexible number of context ids Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 82/97] drm/i915/guc: Connect the number of guc_ids to debugfs Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 83/97] drm/i915/guc: Don't return -EAGAIN to user when guc_ids exhausted Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-07 6:06 ` kernel test robot
2021-05-06 19:14 ` [RFC PATCH 84/97] drm/i915/guc: Don't allow requests not ready to consume all guc_ids Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 85/97] drm/i915/guc: Introduce guc_submit_engine object Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 86/97] drm/i915/guc: Add golden context to GuC ADS Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 87/97] drm/i915/guc: Implement GuC priority management Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 88/97] drm/i915/guc: Support request cancellation Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 89/97] drm/i915/guc: Check return of __xa_store when registering a context Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 90/97] drm/i915/guc: Non-static lrc descriptor registration buffer Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 91/97] drm/i915/guc: Take GT PM ref when deregistering context Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 92/97] drm/i915: Add GT PM delayed worker Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 93/97] drm/i915/guc: Take engine PM when a context is pinned with GuC submission Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 94/97] drm/i915/guc: Don't call switch_to_kernel_context " Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 95/97] drm/i915/guc: Selftest for GuC flow control Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 96/97] drm/i915/guc: Update GuC documentation Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-06 19:14 ` [RFC PATCH 97/97] drm/i915/guc: Unblock GuC submission on Gen11+ Matthew Brost
2021-05-06 19:14 ` [Intel-gfx] " Matthew Brost
2021-05-09 17:12 ` [RFC PATCH 00/97] Basic GuC submission support in the i915 Martin Peres
2021-05-09 17:12 ` [Intel-gfx] " Martin Peres
2021-05-09 23:11 ` Jason Ekstrand
2021-05-09 23:11 ` [Intel-gfx] " Jason Ekstrand
2021-05-10 13:55 ` Martin Peres
2021-05-10 13:55 ` [Intel-gfx] " Martin Peres
2021-05-10 16:25 ` Jason Ekstrand
2021-05-10 16:25 ` [Intel-gfx] " Jason Ekstrand
2021-05-11 8:01 ` Martin Peres
2021-05-11 8:01 ` [Intel-gfx] " Martin Peres
2021-05-10 16:33 ` Daniel Vetter
2021-05-10 16:33 ` [Intel-gfx] " Daniel Vetter
2021-05-10 18:30 ` Francisco Jerez
2021-05-10 18:30 ` Francisco Jerez
2021-05-11 8:06 ` Martin Peres
2021-05-11 8:06 ` [Intel-gfx] " Martin Peres
2021-05-11 15:26 ` Bloomfield, Jon
2021-05-11 15:26 ` [Intel-gfx] " Bloomfield, Jon
2021-05-11 16:39 ` Matthew Brost
2021-05-11 16:39 ` [Intel-gfx] " Matthew Brost
2021-05-12 6:26 ` Martin Peres
2021-05-12 6:26 ` [Intel-gfx] " Martin Peres
2021-05-14 16:31 ` Jason Ekstrand
2021-05-14 16:31 ` [Intel-gfx] " Jason Ekstrand
2021-05-25 15:37 ` Alex Deucher
2021-05-25 15:37 ` [Intel-gfx] " Alex Deucher
2021-05-11 2:58 ` Dixit, Ashutosh
2021-05-11 2:58 ` [Intel-gfx] " Dixit, Ashutosh
2021-05-11 7:47 ` Martin Peres
2021-05-11 7:47 ` [Intel-gfx] " Martin Peres
2021-05-14 11:11 ` Tvrtko Ursulin
2021-05-14 11:11 ` Tvrtko Ursulin
2021-05-14 16:36 ` Jason Ekstrand
2021-05-14 16:36 ` Jason Ekstrand
2021-05-14 16:46 ` Matthew Brost
2021-05-14 16:46 ` Matthew Brost
2021-05-14 16:41 ` Matthew Brost
2021-05-14 16:41 ` Matthew Brost
2021-05-25 10:32 ` Tvrtko Ursulin
2021-05-25 10:32 ` Tvrtko Ursulin
2021-05-25 16:45 ` Matthew Brost
2021-05-25 16:45 ` Matthew Brost
2021-06-02 15:27 ` Tvrtko Ursulin
2021-06-02 15:27 ` Tvrtko Ursulin
2021-06-02 18:57 ` Daniel Vetter
2021-06-02 18:57 ` Daniel Vetter
2021-06-03 3:41 ` Matthew Brost
2021-06-03 3:41 ` Matthew Brost
2021-06-03 4:47 ` Daniel Vetter
2021-06-03 4:47 ` Daniel Vetter
2021-06-03 9:49 ` Tvrtko Ursulin
2021-06-03 9:49 ` Tvrtko Ursulin
2021-06-03 10:52 ` Tvrtko Ursulin
2021-06-03 10:52 ` Tvrtko Ursulin
2021-06-03 4:10 ` Matthew Brost
2021-06-03 4:10 ` Matthew Brost
2021-06-03 8:51 ` Tvrtko Ursulin
2021-06-03 8:51 ` Tvrtko Ursulin
2021-06-03 16:34 ` Matthew Brost
2021-06-03 16:34 ` Matthew Brost
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210506191451.77768-9-matthew.brost@intel.com \
--to=matthew.brost@intel.com \
--cc=daniel.vetter@intel.com \
--cc=daniele.ceraolospurio@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jason.ekstrand@intel.com \
--cc=john.c.harrison@intel.com \
--cc=jon.bloomfield@intel.com \
--cc=tvrtko.ursulin@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.