From: Michael Walle <michael@walle.cc> To: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>, Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, soc@kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Claudiu Beznea <claudiu.beznea@microchip.com>, Tudor.Ambarus@microchip.com, Horatiu Vultur <horatiu.vultur@microchip.com>, Michael Walle <michael@walle.cc> Subject: [PATCH v4 12/13] ARM: dts: lan966x: add switch node Date: Tue, 3 May 2022 00:41:26 +0200 [thread overview] Message-ID: <20220502224127.2604333-13-michael@walle.cc> (raw) In-Reply-To: <20220502224127.2604333-1-michael@walle.cc> Add the switch node and its 8 children ports. All are disabled by default. Signed-off-by: Michael Walle <michael@walle.cc> --- arch/arm/boot/dts/lan966x.dtsi | 62 ++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi index d8185f5c7bfc..38e90a31d2dd 100644 --- a/arch/arm/boot/dts/lan966x.dtsi +++ b/arch/arm/boot/dts/lan966x.dtsi @@ -84,6 +84,68 @@ soc { #size-cells = <1>; ranges; + switch: switch@e0000000 { + compatible = "microchip,lan966x-switch"; + reg = <0xe0000000 0x0100000>, + <0xe2000000 0x0800000>; + reg-names = "cpu", "gcb"; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "xtr", "fdma", "ana", "ptp", + "ptp-ext"; + resets = <&reset 0>; + reset-names = "switch"; + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + port4: port@4 { + reg = <4>; + status = "disabled"; + }; + + port5: port@5 { + reg = <5>; + status = "disabled"; + }; + + port6: port@6 { + reg = <6>; + status = "disabled"; + }; + + port7: port@7 { + reg = <7>; + status = "disabled"; + }; + }; + }; + flx0: flexcom@e0040000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xe0040000 0x100>; -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Michael Walle <michael@walle.cc> To: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>, Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, soc@kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Claudiu Beznea <claudiu.beznea@microchip.com>, Tudor.Ambarus@microchip.com, Horatiu Vultur <horatiu.vultur@microchip.com>, Michael Walle <michael@walle.cc> Subject: [PATCH v4 12/13] ARM: dts: lan966x: add switch node Date: Tue, 3 May 2022 00:41:26 +0200 [thread overview] Message-ID: <20220502224127.2604333-13-michael@walle.cc> (raw) In-Reply-To: <20220502224127.2604333-1-michael@walle.cc> Add the switch node and its 8 children ports. All are disabled by default. Signed-off-by: Michael Walle <michael@walle.cc> --- arch/arm/boot/dts/lan966x.dtsi | 62 ++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi index d8185f5c7bfc..38e90a31d2dd 100644 --- a/arch/arm/boot/dts/lan966x.dtsi +++ b/arch/arm/boot/dts/lan966x.dtsi @@ -84,6 +84,68 @@ soc { #size-cells = <1>; ranges; + switch: switch@e0000000 { + compatible = "microchip,lan966x-switch"; + reg = <0xe0000000 0x0100000>, + <0xe2000000 0x0800000>; + reg-names = "cpu", "gcb"; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "xtr", "fdma", "ana", "ptp", + "ptp-ext"; + resets = <&reset 0>; + reset-names = "switch"; + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + port4: port@4 { + reg = <4>; + status = "disabled"; + }; + + port5: port@5 { + reg = <5>; + status = "disabled"; + }; + + port6: port@6 { + reg = <6>; + status = "disabled"; + }; + + port7: port@7 { + reg = <7>; + status = "disabled"; + }; + }; + }; + flx0: flexcom@e0040000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xe0040000 0x100>; -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-05-02 22:42 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-02 22:41 [PATCH v4 00/13] ARM: dts: lan966x: dtsi improvements and KSwitch D10 support Michael Walle 2022-05-02 22:41 ` Michael Walle 2022-05-02 22:41 ` [PATCH v4 01/13] ARM: dts: lan966x: swap dma channels for crypto node Michael Walle 2022-05-02 22:41 ` Michael Walle 2022-05-02 22:41 ` [PATCH v4 02/13] ARM: dts: lan966x: add sgpio node Michael Walle 2022-05-02 22:41 ` Michael Walle 2022-05-02 22:41 ` [PATCH v4 03/13] ARM: dts: lan966x: add missing uart DMA channel Michael Walle 2022-05-02 22:41 ` Michael Walle 2022-05-02 22:41 ` [PATCH v4 04/13] ARM: dts: lan966x: add all flexcom usart nodes Michael Walle 2022-05-02 22:41 ` Michael Walle 2022-05-02 22:41 ` [PATCH v4 05/13] ARM: dts: lan966x: add flexcom SPI nodes Michael Walle 2022-05-02 22:41 ` Michael Walle 2022-05-02 22:41 ` [PATCH v4 06/13] ARM: dts: lan966x: add flexcom I2C nodes Michael Walle 2022-05-02 22:41 ` Michael Walle 2022-05-02 22:41 ` [PATCH v4 07/13] ARM: dts: lan966x: add basic Kontron KSwitch D10 support Michael Walle 2022-05-02 22:41 ` Michael Walle 2022-05-02 22:41 ` [PATCH v4 08/13] ARM: dts: lan966x: add hwmon node Michael Walle 2022-05-02 22:41 ` Michael Walle 2022-05-09 6:25 ` Claudiu.Beznea 2022-05-09 6:25 ` Claudiu.Beznea 2022-05-02 22:41 ` [PATCH v4 09/13] ARM: dts: lan966x: add MIIM nodes Michael Walle 2022-05-02 22:41 ` Michael Walle 2022-05-09 6:26 ` Claudiu.Beznea 2022-05-09 6:26 ` Claudiu.Beznea 2022-05-02 22:41 ` [PATCH v4 10/13] ARM: dts: lan966x: add reset switch reset node Michael Walle 2022-05-02 22:41 ` Michael Walle 2022-05-09 6:26 ` Claudiu.Beznea 2022-05-09 6:26 ` Claudiu.Beznea 2022-05-02 22:41 ` [PATCH v4 11/13] ARM: dts: lan966x: add serdes node Michael Walle 2022-05-02 22:41 ` Michael Walle 2022-05-09 6:26 ` Claudiu.Beznea 2022-05-09 6:26 ` Claudiu.Beznea 2022-05-02 22:41 ` Michael Walle [this message] 2022-05-02 22:41 ` [PATCH v4 12/13] ARM: dts: lan966x: add switch node Michael Walle 2022-05-09 6:27 ` Claudiu.Beznea 2022-05-09 6:27 ` Claudiu.Beznea 2022-05-02 22:41 ` [PATCH v4 13/13] ARM: dts: kswitch-d10: enable networking Michael Walle 2022-05-02 22:41 ` Michael Walle 2022-05-09 6:27 ` Claudiu.Beznea 2022-05-09 6:27 ` Claudiu.Beznea 2022-05-04 10:16 ` [PATCH v4 00/13] ARM: dts: lan966x: dtsi improvements and KSwitch D10 support Horatiu Vultur 2022-05-04 10:16 ` Horatiu Vultur 2022-05-11 9:07 ` Michael Walle 2022-05-11 9:07 ` Michael Walle
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220502224127.2604333-13-michael@walle.cc \ --to=michael@walle.cc \ --cc=Tudor.Ambarus@microchip.com \ --cc=alexandre.belloni@bootlin.com \ --cc=arnd@arndb.de \ --cc=claudiu.beznea@microchip.com \ --cc=devicetree@vger.kernel.org \ --cc=horatiu.vultur@microchip.com \ --cc=kavyasree.kotagiri@microchip.com \ --cc=krzysztof.kozlowski@canonical.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nicolas.ferre@microchip.com \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=soc@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.