From: Abel Vesa <abel.vesa@linaro.org> To: "Andy Gross" <agross@kernel.org>, "Bjorn Andersson" <andersson@kernel.org>, "Konrad Dybcio" <konrad.dybcio@linaro.org>, "Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>, "Rob Herring" <robh@kernel.org>, "Krzysztof Wilczyński" <kw@linux.com>, "Bjorn Helgaas" <bhelgaas@google.com>, "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>, "vkoul@kernel.org" <vkoul@kernel.org>, "Kishon Vijay Abraham I" <kishon@kernel.org>, "Manivannan Sadhasivam" <mani@kernel.org>, "Philipp Zabel" <p.zabel@pengutronix.de> Cc: linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org, devicetree@vger.kernel.org, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, linux-phy@lists.infradead.org, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Subject: [PATCH v5 04/12] phy: qcom-qmp: pcs-pcie: Add v6 register offsets Date: Tue, 24 Jan 2023 14:47:06 +0200 [thread overview] Message-ID: <20230124124714.3087948-5-abel.vesa@linaro.org> (raw) In-Reply-To: <20230124124714.3087948-1-abel.vesa@linaro.org> The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB, UFS and PCIE g3x2. Add the new PCS PCIE specific offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- This patchset relies on the following patchset: https://lore.kernel.org/all/20230117224148.1914627-1-abel.vesa@linaro.org/ The v4 of this patch is: https://lore.kernel.org/all/20230119140453.3942340-5-abel.vesa@linaro.org/ Changes since v4: * none Changes since v3: * added Dmitry's R-b tag Changes since v2: * none Changes since v1: * split all the offsets into separate patches, like Vinod suggested drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 1 + drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h | 15 +++++++++++++++ 2 files changed, 16 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c index 21727e90fad1..d4ca38f31e3f 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c @@ -29,6 +29,7 @@ #include "phy-qcom-qmp-pcs-pcie-v4_20.h" #include "phy-qcom-qmp-pcs-pcie-v5.h" #include "phy-qcom-qmp-pcs-pcie-v5_20.h" +#include "phy-qcom-qmp-pcs-pcie-v6.h" #include "phy-qcom-qmp-pcie-qhp.h" /* QPHY_SW_RESET bit */ diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h new file mode 100644 index 000000000000..91e70002eb47 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_PCS_PCIE_V6_H_ +#define QCOM_PHY_QMP_PCS_PCIE_V6_H_ + +/* Only for QMP V6 PHY - PCIE have different offsets than V5 */ +#define QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG2 0x0c +#define QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG4 0x14 +#define QPHY_PCIE_V6_PCS_PCIE_ENDPOINT_REFCLK_DRIVE 0x20 +#define QPHY_PCIE_V6_PCS_PCIE_OSC_DTCT_ACTIONS 0x94 + +#endif -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Abel Vesa <abel.vesa@linaro.org> To: "Andy Gross" <agross@kernel.org>, "Bjorn Andersson" <andersson@kernel.org>, "Konrad Dybcio" <konrad.dybcio@linaro.org>, "Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>, "Rob Herring" <robh@kernel.org>, "Krzysztof Wilczyński" <kw@linux.com>, "Bjorn Helgaas" <bhelgaas@google.com>, "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>, "vkoul@kernel.org" <vkoul@kernel.org>, "Kishon Vijay Abraham I" <kishon@kernel.org>, "Manivannan Sadhasivam" <mani@kernel.org>, "Philipp Zabel" <p.zabel@pengutronix.de> Cc: linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org, devicetree@vger.kernel.org, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, linux-phy@lists.infradead.org, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Subject: [PATCH v5 04/12] phy: qcom-qmp: pcs-pcie: Add v6 register offsets Date: Tue, 24 Jan 2023 14:47:06 +0200 [thread overview] Message-ID: <20230124124714.3087948-5-abel.vesa@linaro.org> (raw) In-Reply-To: <20230124124714.3087948-1-abel.vesa@linaro.org> The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB, UFS and PCIE g3x2. Add the new PCS PCIE specific offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- This patchset relies on the following patchset: https://lore.kernel.org/all/20230117224148.1914627-1-abel.vesa@linaro.org/ The v4 of this patch is: https://lore.kernel.org/all/20230119140453.3942340-5-abel.vesa@linaro.org/ Changes since v4: * none Changes since v3: * added Dmitry's R-b tag Changes since v2: * none Changes since v1: * split all the offsets into separate patches, like Vinod suggested drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 1 + drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h | 15 +++++++++++++++ 2 files changed, 16 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c index 21727e90fad1..d4ca38f31e3f 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c @@ -29,6 +29,7 @@ #include "phy-qcom-qmp-pcs-pcie-v4_20.h" #include "phy-qcom-qmp-pcs-pcie-v5.h" #include "phy-qcom-qmp-pcs-pcie-v5_20.h" +#include "phy-qcom-qmp-pcs-pcie-v6.h" #include "phy-qcom-qmp-pcie-qhp.h" /* QPHY_SW_RESET bit */ diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h new file mode 100644 index 000000000000..91e70002eb47 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_PCS_PCIE_V6_H_ +#define QCOM_PHY_QMP_PCS_PCIE_V6_H_ + +/* Only for QMP V6 PHY - PCIE have different offsets than V5 */ +#define QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG2 0x0c +#define QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG4 0x14 +#define QPHY_PCIE_V6_PCS_PCIE_ENDPOINT_REFCLK_DRIVE 0x20 +#define QPHY_PCIE_V6_PCS_PCIE_OSC_DTCT_ACTIONS 0x94 + +#endif -- 2.34.1 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2023-01-24 12:47 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-01-24 12:47 [PATCH v5 00/12] sm8550: Add PCIe HC and PHY support Abel Vesa 2023-01-24 12:47 ` Abel Vesa 2023-01-24 12:47 ` [PATCH v5 01/12] dt-bindings: phy: Add QMP PCIe PHY comptible for SM8550 Abel Vesa 2023-01-24 12:47 ` Abel Vesa 2023-01-26 11:03 ` Krzysztof Kozlowski 2023-01-26 11:03 ` Krzysztof Kozlowski 2023-01-24 12:47 ` [PATCH v5 02/12] phy: qcom-qmp: pcs: Add v6 register offsets Abel Vesa 2023-01-24 12:47 ` Abel Vesa 2023-01-24 12:47 ` [PATCH v5 03/12] phy: qcom-qmp: pcs: Add v6.20 " Abel Vesa 2023-01-24 12:47 ` Abel Vesa 2023-01-24 12:47 ` Abel Vesa [this message] 2023-01-24 12:47 ` [PATCH v5 04/12] phy: qcom-qmp: pcs-pcie: Add v6 " Abel Vesa 2023-01-24 12:47 ` [PATCH v5 05/12] phy: qcom-qmp: pcs-pcie: Add v6.20 " Abel Vesa 2023-01-24 12:47 ` Abel Vesa 2023-01-24 12:47 ` [PATCH v5 06/12] phy: qcom-qmp: qserdes-txrx: " Abel Vesa 2023-01-24 12:47 ` Abel Vesa 2023-01-24 12:47 ` [PATCH v5 07/12] phy: qcom-qmp: qserdes-lane-shared: Add v6 " Abel Vesa 2023-01-24 12:47 ` Abel Vesa 2023-01-24 12:47 ` [PATCH v5 08/12] phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs Abel Vesa 2023-01-24 12:47 ` Abel Vesa 2023-01-24 12:47 ` [PATCH v5 09/12] dt-bindings: PCI: qcom: Add SM8550 compatible Abel Vesa 2023-01-24 12:47 ` Abel Vesa 2023-01-26 11:05 ` Krzysztof Kozlowski 2023-01-26 11:05 ` Krzysztof Kozlowski 2023-01-24 12:47 ` [PATCH v5 10/12] PCI: qcom: Add SM8550 PCIe support Abel Vesa 2023-01-24 12:47 ` Abel Vesa 2023-01-24 12:47 ` [PATCH v5 11/12] arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes Abel Vesa 2023-01-24 12:47 ` Abel Vesa 2023-01-24 12:47 ` [PATCH v5 12/12] arm64: dts: qcom: sm8550-mtp: " Abel Vesa 2023-01-24 12:47 ` Abel Vesa
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230124124714.3087948-5-abel.vesa@linaro.org \ --to=abel.vesa@linaro.org \ --cc=agross@kernel.org \ --cc=andersson@kernel.org \ --cc=bhelgaas@google.com \ --cc=devicetree@vger.kernel.org \ --cc=dmitry.baryshkov@linaro.org \ --cc=kishon@kernel.org \ --cc=konrad.dybcio@linaro.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=kw@linux.com \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=linux-phy@lists.infradead.org \ --cc=lorenzo.pieralisi@arm.com \ --cc=mani@kernel.org \ --cc=p.zabel@pengutronix.de \ --cc=robh@kernel.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.