From: Abel Vesa <abel.vesa@linaro.org>
To: "Andy Gross" <agross@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"vkoul@kernel.org" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Philipp Zabel" <p.zabel@pengutronix.de>
Cc: linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-phy@lists.infradead.org
Subject: [PATCH v5 07/12] phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets
Date: Tue, 24 Jan 2023 14:47:09 +0200 [thread overview]
Message-ID: <20230124124714.3087948-8-abel.vesa@linaro.org> (raw)
In-Reply-To: <20230124124714.3087948-1-abel.vesa@linaro.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new lane shared PCIE specific offsets in a dedicated
header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
This patchset relies on the following patchset:
https://lore.kernel.org/all/20230117224148.1914627-1-abel.vesa@linaro.org/
The v4 of this patch is:
https://lore.kernel.org/all/20230119140453.3942340-8-abel.vesa@linaro.org/
Changes since v4:
* none
Changes since v3:
* none
Changes since v2:
* none
Changes since v1:
* split all the offsets into separate patches, like Vinod suggested
.../phy-qcom-qmp-qserdes-ln-shrd-v6.h | 32 +++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 1 +
2 files changed, 33 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
new file mode 100644
index 000000000000..86d7d796d5d7
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_
+#define QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_
+
+#define QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL 0xa0
+#define QSERDES_V6_LN_SHRD_RX_Q_EN_RATES 0xb0
+#define QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1 0xb4
+#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1 0xc4
+#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2 0xc8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0 0xd4
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1 0xd8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2 0xdc
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3 0xe0
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4 0xe4
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B5 0xe8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B6 0xec
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE210 0xf0
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE3 0xf4
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE210 0xf8
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE3 0xfc
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE210 0x100
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE3 0x104
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH4_RATE3 0x10c
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH5_RATE3 0x114
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH6_RATE3 0x11c
+#define QSERDES_V6_LN_SHRD_RX_SUMMER_CAL_SPD_MODE 0x128
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index e5974e6caf51..148663ee713a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -24,6 +24,7 @@
#include "phy-qcom-qmp-qserdes-com-v6.h"
#include "phy-qcom-qmp-qserdes-txrx-v6.h"
#include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
+#include "phy-qcom-qmp-qserdes-ln-shrd-v6.h"
#include "phy-qcom-qmp-qserdes-pll.h"
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Abel Vesa <abel.vesa@linaro.org>
To: "Andy Gross" <agross@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"vkoul@kernel.org" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Philipp Zabel" <p.zabel@pengutronix.de>
Cc: linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-phy@lists.infradead.org
Subject: [PATCH v5 07/12] phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets
Date: Tue, 24 Jan 2023 14:47:09 +0200 [thread overview]
Message-ID: <20230124124714.3087948-8-abel.vesa@linaro.org> (raw)
In-Reply-To: <20230124124714.3087948-1-abel.vesa@linaro.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new lane shared PCIE specific offsets in a dedicated
header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
This patchset relies on the following patchset:
https://lore.kernel.org/all/20230117224148.1914627-1-abel.vesa@linaro.org/
The v4 of this patch is:
https://lore.kernel.org/all/20230119140453.3942340-8-abel.vesa@linaro.org/
Changes since v4:
* none
Changes since v3:
* none
Changes since v2:
* none
Changes since v1:
* split all the offsets into separate patches, like Vinod suggested
.../phy-qcom-qmp-qserdes-ln-shrd-v6.h | 32 +++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 1 +
2 files changed, 33 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
new file mode 100644
index 000000000000..86d7d796d5d7
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_
+#define QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_
+
+#define QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL 0xa0
+#define QSERDES_V6_LN_SHRD_RX_Q_EN_RATES 0xb0
+#define QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1 0xb4
+#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1 0xc4
+#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2 0xc8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0 0xd4
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1 0xd8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2 0xdc
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3 0xe0
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4 0xe4
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B5 0xe8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B6 0xec
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE210 0xf0
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE3 0xf4
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE210 0xf8
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE3 0xfc
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE210 0x100
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE3 0x104
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH4_RATE3 0x10c
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH5_RATE3 0x114
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH6_RATE3 0x11c
+#define QSERDES_V6_LN_SHRD_RX_SUMMER_CAL_SPD_MODE 0x128
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index e5974e6caf51..148663ee713a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -24,6 +24,7 @@
#include "phy-qcom-qmp-qserdes-com-v6.h"
#include "phy-qcom-qmp-qserdes-txrx-v6.h"
#include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
+#include "phy-qcom-qmp-qserdes-ln-shrd-v6.h"
#include "phy-qcom-qmp-qserdes-pll.h"
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2023-01-24 12:47 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-24 12:47 [PATCH v5 00/12] sm8550: Add PCIe HC and PHY support Abel Vesa
2023-01-24 12:47 ` Abel Vesa
2023-01-24 12:47 ` [PATCH v5 01/12] dt-bindings: phy: Add QMP PCIe PHY comptible for SM8550 Abel Vesa
2023-01-24 12:47 ` Abel Vesa
2023-01-26 11:03 ` Krzysztof Kozlowski
2023-01-26 11:03 ` Krzysztof Kozlowski
2023-01-24 12:47 ` [PATCH v5 02/12] phy: qcom-qmp: pcs: Add v6 register offsets Abel Vesa
2023-01-24 12:47 ` Abel Vesa
2023-01-24 12:47 ` [PATCH v5 03/12] phy: qcom-qmp: pcs: Add v6.20 " Abel Vesa
2023-01-24 12:47 ` Abel Vesa
2023-01-24 12:47 ` [PATCH v5 04/12] phy: qcom-qmp: pcs-pcie: Add v6 " Abel Vesa
2023-01-24 12:47 ` Abel Vesa
2023-01-24 12:47 ` [PATCH v5 05/12] phy: qcom-qmp: pcs-pcie: Add v6.20 " Abel Vesa
2023-01-24 12:47 ` Abel Vesa
2023-01-24 12:47 ` [PATCH v5 06/12] phy: qcom-qmp: qserdes-txrx: " Abel Vesa
2023-01-24 12:47 ` Abel Vesa
2023-01-24 12:47 ` Abel Vesa [this message]
2023-01-24 12:47 ` [PATCH v5 07/12] phy: qcom-qmp: qserdes-lane-shared: Add v6 " Abel Vesa
2023-01-24 12:47 ` [PATCH v5 08/12] phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs Abel Vesa
2023-01-24 12:47 ` Abel Vesa
2023-01-24 12:47 ` [PATCH v5 09/12] dt-bindings: PCI: qcom: Add SM8550 compatible Abel Vesa
2023-01-24 12:47 ` Abel Vesa
2023-01-26 11:05 ` Krzysztof Kozlowski
2023-01-26 11:05 ` Krzysztof Kozlowski
2023-01-24 12:47 ` [PATCH v5 10/12] PCI: qcom: Add SM8550 PCIe support Abel Vesa
2023-01-24 12:47 ` Abel Vesa
2023-01-24 12:47 ` [PATCH v5 11/12] arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes Abel Vesa
2023-01-24 12:47 ` Abel Vesa
2023-01-24 12:47 ` [PATCH v5 12/12] arm64: dts: qcom: sm8550-mtp: " Abel Vesa
2023-01-24 12:47 ` Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230124124714.3087948-8-abel.vesa@linaro.org \
--to=abel.vesa@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kw@linux.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mani@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.