From: Abel Vesa <abel.vesa@linaro.org>
To: "Andy Gross" <agross@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"vkoul@kernel.org" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Johan Hovold" <johan+linaro@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v8 02/11] phy: qcom-qmp: pcs: Add v6 register offsets
Date: Mon, 6 Feb 2023 23:26:10 +0200 [thread overview]
Message-ID: <20230206212619.3218741-3-abel.vesa@linaro.org> (raw)
In-Reply-To: <20230206212619.3218741-1-abel.vesa@linaro.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS offsets in a dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
The v7 of this patch is:
https://lore.kernel.org/all/20230203081807.2248625-3-abel.vesa@linaro.org/
Changes since v7:
* none
Changes since v6:
* none
Changes since v5:
* none
Changes since v4:
* none
Changes since v3:
* added Dmitry's R-b tag
Changes since v2:
* none
Changes since v1:
* split all the offsets into separate patches, like Vinod suggested
drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h | 16 ++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 2 ++
2 files changed, 18 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
new file mode 100644
index 000000000000..18c4a3abe590
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V6_H_
+#define QCOM_PHY_QMP_PCS_V6_H_
+
+/* Only for QMP V6 PHY - USB/PCIe PCS registers */
+#define QPHY_V6_PCS_REFGEN_REQ_CONFIG1 0xdc
+#define QPHY_V6_PCS_RX_SIGDET_LVL 0x188
+#define QPHY_V6_PCS_RATE_SLEW_CNTRL1 0x198
+#define QPHY_V6_PCS_EQ_CONFIG2 0x1e0
+#define QPHY_V6_PCS_PCS_TX_RX_CONFIG 0x1d0
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index a63a691b8372..80e3b5c860b6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -38,6 +38,8 @@
#include "phy-qcom-qmp-pcs-v5_20.h"
+#include "phy-qcom-qmp-pcs-v6.h"
+
/* Only for QMP V3 & V4 PHY - DP COM registers */
#define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00
#define QPHY_V3_DP_COM_SW_RESET 0x04
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Abel Vesa <abel.vesa@linaro.org>
To: "Andy Gross" <agross@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"vkoul@kernel.org" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Johan Hovold" <johan+linaro@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v8 02/11] phy: qcom-qmp: pcs: Add v6 register offsets
Date: Mon, 6 Feb 2023 23:26:10 +0200 [thread overview]
Message-ID: <20230206212619.3218741-3-abel.vesa@linaro.org> (raw)
In-Reply-To: <20230206212619.3218741-1-abel.vesa@linaro.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS offsets in a dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
The v7 of this patch is:
https://lore.kernel.org/all/20230203081807.2248625-3-abel.vesa@linaro.org/
Changes since v7:
* none
Changes since v6:
* none
Changes since v5:
* none
Changes since v4:
* none
Changes since v3:
* added Dmitry's R-b tag
Changes since v2:
* none
Changes since v1:
* split all the offsets into separate patches, like Vinod suggested
drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h | 16 ++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 2 ++
2 files changed, 18 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
new file mode 100644
index 000000000000..18c4a3abe590
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V6_H_
+#define QCOM_PHY_QMP_PCS_V6_H_
+
+/* Only for QMP V6 PHY - USB/PCIe PCS registers */
+#define QPHY_V6_PCS_REFGEN_REQ_CONFIG1 0xdc
+#define QPHY_V6_PCS_RX_SIGDET_LVL 0x188
+#define QPHY_V6_PCS_RATE_SLEW_CNTRL1 0x198
+#define QPHY_V6_PCS_EQ_CONFIG2 0x1e0
+#define QPHY_V6_PCS_PCS_TX_RX_CONFIG 0x1d0
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index a63a691b8372..80e3b5c860b6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -38,6 +38,8 @@
#include "phy-qcom-qmp-pcs-v5_20.h"
+#include "phy-qcom-qmp-pcs-v6.h"
+
/* Only for QMP V3 & V4 PHY - DP COM registers */
#define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00
#define QPHY_V3_DP_COM_SW_RESET 0x04
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2023-02-06 21:26 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-06 21:26 [PATCH v8 00/11] sm8550: Add PCIe HC and PHY support Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` [PATCH v8 01/11] dt-bindings: phy: Add QMP PCIe PHY comptible for SM8550 Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` Abel Vesa [this message]
2023-02-06 21:26 ` [PATCH v8 02/11] phy: qcom-qmp: pcs: Add v6 register offsets Abel Vesa
2023-02-06 21:26 ` [PATCH v8 03/11] phy: qcom-qmp: pcs: Add v6.20 " Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` [PATCH v8 04/11] phy: qcom-qmp: pcs-pcie: Add v6 " Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` [PATCH v8 05/11] phy: qcom-qmp: pcs-pcie: Add v6.20 " Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` [PATCH v8 06/11] phy: qcom-qmp: qserdes-txrx: " Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` [PATCH v8 07/11] phy: qcom-qmp: qserdes-lane-shared: Add v6 " Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` [PATCH v8 08/11] phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-08 16:48 ` Johan Hovold
2023-02-08 16:48 ` Johan Hovold
2023-02-06 21:26 ` [PATCH v8 09/11] dt-bindings: PCI: qcom: Add SM8550 compatible Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` [PATCH v8 10/11] PCI: qcom: Add SM8550 PCIe support Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-08 16:58 ` Johan Hovold
2023-02-08 16:58 ` Johan Hovold
2023-02-06 21:26 ` [PATCH v8 11/11] arm64: dts: qcom: sm8550: Fix PCIe PHYs and controllers nodes Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-08 17:02 ` Johan Hovold
2023-02-08 17:02 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230206212619.3218741-3-abel.vesa@linaro.org \
--to=abel.vesa@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=johan+linaro@kernel.org \
--cc=kishon@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kw@linux.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.