From: Frank Li <Frank.Li@nxp.com> To: krzysztof.kozlowski@linaro.org Cc: Frank.Li@nxp.com, bhelgaas@google.com, conor+dt@kernel.org, devicetree@vger.kernel.org, festevam@gmail.com, helgaas@kernel.org, hongxing.zhu@nxp.com, imx@lists.linux.dev, kernel@pengutronix.de, krzysztof.kozlowski+dt@linaro.org, kw@linux.com, l.stach@pengutronix.de, linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com, linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org, lpieralisi@kernel.org, manivannan.sadhasivam@linaro.org, robh@kernel.org, s.hauer@pengutronix.de, shawnguo@kernel.org Subject: [PATCH v7 08/16] PCI: imx6: Simplify switch-case logic by involve init_phy callback Date: Wed, 27 Dec 2023 13:27:19 -0500 [thread overview] Message-ID: <20231227182727.1747435-9-Frank.Li@nxp.com> (raw) In-Reply-To: <20231227182727.1747435-1-Frank.Li@nxp.com> Add drvdata::init_phy() callback function, so difference SOC choose difference callback function to simple switch-case logic. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- Notes: change from v1 to v4: - none drivers/pci/controller/dwc/pci-imx6.c | 135 ++++++++++++++------------ 1 file changed, 71 insertions(+), 64 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 717e8fa030deb..d66a2db53bdb7 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -69,6 +69,9 @@ enum imx6_pcie_variants { #define IMX6_PCIE_MAX_CLKS 6 #define IMX6_PCIE_MAX_INSTANCES 2 + +struct imx6_pcie; + struct imx6_pcie_drvdata { enum imx6_pcie_variants variant; enum dw_pcie_device_mode mode; @@ -80,6 +83,7 @@ struct imx6_pcie_drvdata { const u32 ltssm_mask; const u32 mode_off[IMX6_PCIE_MAX_INSTANCES]; const u32 mode_mask[IMX6_PCIE_MAX_INSTANCES]; + int (*init_phy)(struct imx6_pcie *pcie); }; struct imx6_pcie { @@ -323,76 +327,69 @@ static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data) return 0; } -static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) +static int imx8mq_pcie_init_phy(struct imx6_pcie *imx6_pcie) { - switch (imx6_pcie->drvdata->variant) { - case IMX8MM: - case IMX8MM_EP: - case IMX8MP: - case IMX8MP_EP: - /* - * The PHY initialization had been done in the PHY - * driver, break here directly. - */ - break; - case IMX8MQ: - case IMX8MQ_EP: - /* - * TODO: Currently this code assumes external - * oscillator is being used - */ + /* + * TODO: Currently this code assumes external + * oscillator is being used + */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, + imx6_pcie_grp_offset(imx6_pcie), + IMX8MQ_GPR_PCIE_REF_USE_PAD, + IMX8MQ_GPR_PCIE_REF_USE_PAD); + /* + * Regarding the datasheet, the PCIE_VPH is suggested + * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the + * VREG_BYPASS should be cleared to zero. + */ + if (imx6_pcie->vph && regulator_get_voltage(imx6_pcie->vph) > 3000000) regmap_update_bits(imx6_pcie->iomuxc_gpr, imx6_pcie_grp_offset(imx6_pcie), - IMX8MQ_GPR_PCIE_REF_USE_PAD, - IMX8MQ_GPR_PCIE_REF_USE_PAD); - /* - * Regarding the datasheet, the PCIE_VPH is suggested - * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the - * VREG_BYPASS should be cleared to zero. - */ - if (imx6_pcie->vph && - regulator_get_voltage(imx6_pcie->vph) > 3000000) - regmap_update_bits(imx6_pcie->iomuxc_gpr, - imx6_pcie_grp_offset(imx6_pcie), - IMX8MQ_GPR_PCIE_VREG_BYPASS, - 0); - break; - case IMX7D: - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX8MQ_GPR_PCIE_VREG_BYPASS, + 0); + + return 0; +} + +static int imx7d_pcie_init_phy(struct imx6_pcie *imx6_pcie) +{ + return regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0); - break; - case IMX6SX: - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, - IMX6SX_GPR12_PCIE_RX_EQ_MASK, - IMX6SX_GPR12_PCIE_RX_EQ_2); - fallthrough; - default: - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, +} + +static int imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) +{ + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX6Q_GPR12_PCIE_CTL_2, 0 << 10); - /* configure constant input signal to the pcie ctrl and phy */ - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, - IMX6Q_GPR12_LOS_LEVEL, 9 << 4); - - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, - IMX6Q_GPR8_TX_DEEMPH_GEN1, - imx6_pcie->tx_deemph_gen1 << 0); - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, - IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, - imx6_pcie->tx_deemph_gen2_3p5db << 6); - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, - IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, - imx6_pcie->tx_deemph_gen2_6db << 12); - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, - IMX6Q_GPR8_TX_SWING_FULL, - imx6_pcie->tx_swing_full << 18); - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, - IMX6Q_GPR8_TX_SWING_LOW, - imx6_pcie->tx_swing_low << 25); - break; - } + /* configure constant input signal to the pcie ctrl and phy */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6Q_GPR12_LOS_LEVEL, 9 << 4); + + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, + IMX6Q_GPR8_TX_DEEMPH_GEN1, + imx6_pcie->tx_deemph_gen1 << 0); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, + IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, + imx6_pcie->tx_deemph_gen2_3p5db << 6); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, + IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, + imx6_pcie->tx_deemph_gen2_6db << 12); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, + IMX6Q_GPR8_TX_SWING_FULL, + imx6_pcie->tx_swing_full << 18); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, + IMX6Q_GPR8_TX_SWING_LOW, + imx6_pcie->tx_swing_low << 25); + return 0; +} - imx6_pcie_configure_type(imx6_pcie); +static int imx6sx_pcie_init_phy(struct imx6_pcie *imx6_pcie) +{ + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6SX_GPR12_PCIE_RX_EQ_MASK, IMX6SX_GPR12_PCIE_RX_EQ_2); + + return imx6_pcie_init_phy(imx6_pcie); } static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie) @@ -903,7 +900,11 @@ static int imx6_pcie_host_init(struct dw_pcie_rp *pp) } imx6_pcie_assert_core_reset(imx6_pcie); - imx6_pcie_init_phy(imx6_pcie); + + if (imx6_pcie->drvdata->init_phy) + imx6_pcie->drvdata->init_phy(imx6_pcie); + + imx6_pcie_configure_type(imx6_pcie); ret = imx6_pcie_clk_enable(imx6_pcie); if (ret) { @@ -1374,6 +1375,7 @@ static const struct imx6_pcie_drvdata drvdata[] = { .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2, .mode_off[0] = IOMUXC_GPR12, .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, + .init_phy = imx6_pcie_init_phy, }, [IMX6SX] = { .variant = IMX6SX, @@ -1386,6 +1388,7 @@ static const struct imx6_pcie_drvdata drvdata[] = { .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2, .mode_off[0] = IOMUXC_GPR12, .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, + .init_phy = imx6sx_pcie_init_phy, }, [IMX6QP] = { .variant = IMX6QP, @@ -1399,6 +1402,7 @@ static const struct imx6_pcie_drvdata drvdata[] = { .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2, .mode_off[0] = IOMUXC_GPR12, .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, + .init_phy = imx6_pcie_init_phy, }, [IMX7D] = { .variant = IMX7D, @@ -1409,6 +1413,7 @@ static const struct imx6_pcie_drvdata drvdata[] = { .clk_names = {"pcie_bus", "pcie", "pcie_phy"}, .mode_off[0] = IOMUXC_GPR12, .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, + .init_phy = imx7d_pcie_init_phy, }, [IMX8MQ] = { .variant = IMX8MQ, @@ -1420,6 +1425,7 @@ static const struct imx6_pcie_drvdata drvdata[] = { .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, .mode_off[1] = IOMUXC_GPR12, .mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE, + .init_phy = imx8mq_pcie_init_phy, }, [IMX8MM] = { .variant = IMX8MM, @@ -1452,6 +1458,7 @@ static const struct imx6_pcie_drvdata drvdata[] = { .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, .mode_off[1] = IOMUXC_GPR12, .mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE, + .init_phy = imx8mq_pcie_init_phy, }, [IMX8MM_EP] = { .variant = IMX8MM_EP, -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Frank Li <Frank.Li@nxp.com> To: krzysztof.kozlowski@linaro.org Cc: Frank.Li@nxp.com, bhelgaas@google.com, conor+dt@kernel.org, devicetree@vger.kernel.org, festevam@gmail.com, helgaas@kernel.org, hongxing.zhu@nxp.com, imx@lists.linux.dev, kernel@pengutronix.de, krzysztof.kozlowski+dt@linaro.org, kw@linux.com, l.stach@pengutronix.de, linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com, linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org, lpieralisi@kernel.org, manivannan.sadhasivam@linaro.org, robh@kernel.org, s.hauer@pengutronix.de, shawnguo@kernel.org Subject: [PATCH v7 08/16] PCI: imx6: Simplify switch-case logic by involve init_phy callback Date: Wed, 27 Dec 2023 13:27:19 -0500 [thread overview] Message-ID: <20231227182727.1747435-9-Frank.Li@nxp.com> (raw) In-Reply-To: <20231227182727.1747435-1-Frank.Li@nxp.com> Add drvdata::init_phy() callback function, so difference SOC choose difference callback function to simple switch-case logic. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- Notes: change from v1 to v4: - none drivers/pci/controller/dwc/pci-imx6.c | 135 ++++++++++++++------------ 1 file changed, 71 insertions(+), 64 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 717e8fa030deb..d66a2db53bdb7 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -69,6 +69,9 @@ enum imx6_pcie_variants { #define IMX6_PCIE_MAX_CLKS 6 #define IMX6_PCIE_MAX_INSTANCES 2 + +struct imx6_pcie; + struct imx6_pcie_drvdata { enum imx6_pcie_variants variant; enum dw_pcie_device_mode mode; @@ -80,6 +83,7 @@ struct imx6_pcie_drvdata { const u32 ltssm_mask; const u32 mode_off[IMX6_PCIE_MAX_INSTANCES]; const u32 mode_mask[IMX6_PCIE_MAX_INSTANCES]; + int (*init_phy)(struct imx6_pcie *pcie); }; struct imx6_pcie { @@ -323,76 +327,69 @@ static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data) return 0; } -static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) +static int imx8mq_pcie_init_phy(struct imx6_pcie *imx6_pcie) { - switch (imx6_pcie->drvdata->variant) { - case IMX8MM: - case IMX8MM_EP: - case IMX8MP: - case IMX8MP_EP: - /* - * The PHY initialization had been done in the PHY - * driver, break here directly. - */ - break; - case IMX8MQ: - case IMX8MQ_EP: - /* - * TODO: Currently this code assumes external - * oscillator is being used - */ + /* + * TODO: Currently this code assumes external + * oscillator is being used + */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, + imx6_pcie_grp_offset(imx6_pcie), + IMX8MQ_GPR_PCIE_REF_USE_PAD, + IMX8MQ_GPR_PCIE_REF_USE_PAD); + /* + * Regarding the datasheet, the PCIE_VPH is suggested + * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the + * VREG_BYPASS should be cleared to zero. + */ + if (imx6_pcie->vph && regulator_get_voltage(imx6_pcie->vph) > 3000000) regmap_update_bits(imx6_pcie->iomuxc_gpr, imx6_pcie_grp_offset(imx6_pcie), - IMX8MQ_GPR_PCIE_REF_USE_PAD, - IMX8MQ_GPR_PCIE_REF_USE_PAD); - /* - * Regarding the datasheet, the PCIE_VPH is suggested - * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the - * VREG_BYPASS should be cleared to zero. - */ - if (imx6_pcie->vph && - regulator_get_voltage(imx6_pcie->vph) > 3000000) - regmap_update_bits(imx6_pcie->iomuxc_gpr, - imx6_pcie_grp_offset(imx6_pcie), - IMX8MQ_GPR_PCIE_VREG_BYPASS, - 0); - break; - case IMX7D: - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX8MQ_GPR_PCIE_VREG_BYPASS, + 0); + + return 0; +} + +static int imx7d_pcie_init_phy(struct imx6_pcie *imx6_pcie) +{ + return regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0); - break; - case IMX6SX: - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, - IMX6SX_GPR12_PCIE_RX_EQ_MASK, - IMX6SX_GPR12_PCIE_RX_EQ_2); - fallthrough; - default: - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, +} + +static int imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) +{ + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX6Q_GPR12_PCIE_CTL_2, 0 << 10); - /* configure constant input signal to the pcie ctrl and phy */ - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, - IMX6Q_GPR12_LOS_LEVEL, 9 << 4); - - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, - IMX6Q_GPR8_TX_DEEMPH_GEN1, - imx6_pcie->tx_deemph_gen1 << 0); - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, - IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, - imx6_pcie->tx_deemph_gen2_3p5db << 6); - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, - IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, - imx6_pcie->tx_deemph_gen2_6db << 12); - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, - IMX6Q_GPR8_TX_SWING_FULL, - imx6_pcie->tx_swing_full << 18); - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, - IMX6Q_GPR8_TX_SWING_LOW, - imx6_pcie->tx_swing_low << 25); - break; - } + /* configure constant input signal to the pcie ctrl and phy */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6Q_GPR12_LOS_LEVEL, 9 << 4); + + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, + IMX6Q_GPR8_TX_DEEMPH_GEN1, + imx6_pcie->tx_deemph_gen1 << 0); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, + IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, + imx6_pcie->tx_deemph_gen2_3p5db << 6); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, + IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, + imx6_pcie->tx_deemph_gen2_6db << 12); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, + IMX6Q_GPR8_TX_SWING_FULL, + imx6_pcie->tx_swing_full << 18); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, + IMX6Q_GPR8_TX_SWING_LOW, + imx6_pcie->tx_swing_low << 25); + return 0; +} - imx6_pcie_configure_type(imx6_pcie); +static int imx6sx_pcie_init_phy(struct imx6_pcie *imx6_pcie) +{ + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6SX_GPR12_PCIE_RX_EQ_MASK, IMX6SX_GPR12_PCIE_RX_EQ_2); + + return imx6_pcie_init_phy(imx6_pcie); } static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie) @@ -903,7 +900,11 @@ static int imx6_pcie_host_init(struct dw_pcie_rp *pp) } imx6_pcie_assert_core_reset(imx6_pcie); - imx6_pcie_init_phy(imx6_pcie); + + if (imx6_pcie->drvdata->init_phy) + imx6_pcie->drvdata->init_phy(imx6_pcie); + + imx6_pcie_configure_type(imx6_pcie); ret = imx6_pcie_clk_enable(imx6_pcie); if (ret) { @@ -1374,6 +1375,7 @@ static const struct imx6_pcie_drvdata drvdata[] = { .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2, .mode_off[0] = IOMUXC_GPR12, .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, + .init_phy = imx6_pcie_init_phy, }, [IMX6SX] = { .variant = IMX6SX, @@ -1386,6 +1388,7 @@ static const struct imx6_pcie_drvdata drvdata[] = { .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2, .mode_off[0] = IOMUXC_GPR12, .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, + .init_phy = imx6sx_pcie_init_phy, }, [IMX6QP] = { .variant = IMX6QP, @@ -1399,6 +1402,7 @@ static const struct imx6_pcie_drvdata drvdata[] = { .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2, .mode_off[0] = IOMUXC_GPR12, .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, + .init_phy = imx6_pcie_init_phy, }, [IMX7D] = { .variant = IMX7D, @@ -1409,6 +1413,7 @@ static const struct imx6_pcie_drvdata drvdata[] = { .clk_names = {"pcie_bus", "pcie", "pcie_phy"}, .mode_off[0] = IOMUXC_GPR12, .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, + .init_phy = imx7d_pcie_init_phy, }, [IMX8MQ] = { .variant = IMX8MQ, @@ -1420,6 +1425,7 @@ static const struct imx6_pcie_drvdata drvdata[] = { .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, .mode_off[1] = IOMUXC_GPR12, .mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE, + .init_phy = imx8mq_pcie_init_phy, }, [IMX8MM] = { .variant = IMX8MM, @@ -1452,6 +1458,7 @@ static const struct imx6_pcie_drvdata drvdata[] = { .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, .mode_off[1] = IOMUXC_GPR12, .mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE, + .init_phy = imx8mq_pcie_init_phy, }, [IMX8MM_EP] = { .variant = IMX8MM_EP, -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-27 18:28 UTC|newest] Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-12-27 18:27 [PATCH v7 00/16] PCI: imx6: Clean up and add imx95 pci support Frank Li 2023-12-27 18:27 ` Frank Li 2023-12-27 18:27 ` [PATCH v7 01/16] PCI: imx6: Simplify clock handling by using bulk_clk_*() function Frank Li 2023-12-27 18:27 ` Frank Li 2024-01-02 8:47 ` Marco Felsch 2024-01-02 8:47 ` Marco Felsch 2024-01-03 17:02 ` Frank Li 2024-01-03 17:02 ` Frank Li 2024-01-04 10:07 ` Marco Felsch 2024-01-04 10:07 ` Marco Felsch 2024-01-06 15:27 ` Manivannan Sadhasivam 2024-01-06 15:27 ` Manivannan Sadhasivam 2024-01-06 16:48 ` Frank Li 2024-01-06 16:48 ` Frank Li 2024-01-07 3:02 ` Manivannan Sadhasivam 2024-01-07 3:02 ` Manivannan Sadhasivam 2023-12-27 18:27 ` [PATCH v7 02/16] PCI: imx6: Simplify phy handling by using by using IMX6_PCIE_FLAG_HAS_PHY Frank Li 2023-12-27 18:27 ` Frank Li 2024-01-06 15:33 ` Manivannan Sadhasivam 2024-01-06 15:33 ` Manivannan Sadhasivam 2024-01-06 16:50 ` Frank Li 2024-01-06 16:50 ` Frank Li 2024-01-07 3:04 ` Manivannan Sadhasivam 2024-01-07 3:04 ` Manivannan Sadhasivam 2023-12-27 18:27 ` [PATCH v7 03/16] PCI: imx6: Simplify reset handling by using by using *_FLAG_HAS_*_RESET Frank Li 2023-12-27 18:27 ` Frank Li 2023-12-27 18:27 ` [PATCH v7 04/16] dt-bindings: imx6q-pcie: Add linux,pci-domain as required for iMX8MQ Frank Li 2023-12-27 18:27 ` Frank Li 2024-01-07 3:15 ` Manivannan Sadhasivam 2024-01-07 3:15 ` Manivannan Sadhasivam 2024-01-07 4:47 ` Frank Li 2024-01-07 4:47 ` Frank Li 2024-01-07 5:19 ` Manivannan Sadhasivam 2024-01-07 5:19 ` Manivannan Sadhasivam 2024-01-07 5:38 ` Frank Li 2024-01-07 5:38 ` Frank Li 2024-01-07 6:29 ` Manivannan Sadhasivam 2024-01-07 6:29 ` Manivannan Sadhasivam 2024-01-09 3:49 ` Rob Herring 2024-01-09 3:49 ` Rob Herring 2024-01-09 3:49 ` Rob Herring 2024-01-09 3:49 ` Rob Herring 2023-12-27 18:27 ` [PATCH v7 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID Frank Li 2023-12-27 18:27 ` Frank Li 2024-01-07 3:22 ` Manivannan Sadhasivam 2024-01-07 3:22 ` Manivannan Sadhasivam 2023-12-27 18:27 ` [PATCH v7 06/16] PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_mask Frank Li 2023-12-27 18:27 ` Frank Li 2024-01-07 3:24 ` Manivannan Sadhasivam 2024-01-07 3:24 ` Manivannan Sadhasivam 2023-12-27 18:27 ` [PATCH v7 07/16] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask Frank Li 2023-12-27 18:27 ` Frank Li 2024-01-07 5:16 ` Manivannan Sadhasivam 2024-01-07 5:16 ` Manivannan Sadhasivam 2024-01-07 5:32 ` Frank Li 2024-01-07 5:32 ` Frank Li 2024-01-07 5:35 ` Manivannan Sadhasivam 2024-01-07 5:35 ` Manivannan Sadhasivam 2023-12-27 18:27 ` Frank Li [this message] 2023-12-27 18:27 ` [PATCH v7 08/16] PCI: imx6: Simplify switch-case logic by involve init_phy callback Frank Li 2024-01-07 5:33 ` Manivannan Sadhasivam 2024-01-07 5:33 ` Manivannan Sadhasivam 2023-12-27 18:27 ` [PATCH v7 09/16] dt-bindings: imx6q-pcie: Clean up irrationality clocks check Frank Li 2023-12-27 18:27 ` Frank Li 2024-01-07 5:34 ` Manivannan Sadhasivam 2024-01-07 5:34 ` Manivannan Sadhasivam 2023-12-27 18:27 ` [PATCH v7 10/16] dt-bindings: imx6q-pcie: restruct reg and reg-name Frank Li 2023-12-27 18:27 ` Frank Li 2024-01-07 5:35 ` Manivannan Sadhasivam 2024-01-07 5:35 ` Manivannan Sadhasivam 2023-12-27 18:27 ` [PATCH v7 11/16] dt-bindings: imx6q-pcie: Add imx95 pcie compatible string Frank Li 2023-12-27 18:27 ` Frank Li 2024-01-02 16:03 ` Rob Herring 2024-01-02 16:03 ` Rob Herring 2023-12-27 18:27 ` [PATCH v7 12/16] PCI: imx6: Add iMX95 PCIe support Frank Li 2023-12-27 18:27 ` Frank Li 2024-01-07 5:51 ` Manivannan Sadhasivam 2024-01-07 5:51 ` Manivannan Sadhasivam 2023-12-27 18:27 ` [PATCH v7 13/16] PCI: imx6: Clean up get addr_space code Frank Li 2023-12-27 18:27 ` Frank Li 2024-01-07 5:55 ` Manivannan Sadhasivam 2024-01-07 5:55 ` Manivannan Sadhasivam 2023-12-27 18:27 ` [PATCH v7 14/16] PCI: imx6: Add epc_features in imx6_pcie_drvdata Frank Li 2023-12-27 18:27 ` Frank Li 2024-01-07 6:16 ` Manivannan Sadhasivam 2024-01-07 6:16 ` Manivannan Sadhasivam 2023-12-27 18:27 ` [PATCH v7 15/16] dt-bindings: imx6q-pcie: Add iMX95 pcie endpoint compatible string Frank Li 2023-12-27 18:27 ` Frank Li 2024-01-09 3:53 ` Rob Herring 2024-01-09 3:53 ` Rob Herring 2023-12-27 18:27 ` [PATCH v7 16/16] PCI: imx6: Add iMX95 Endpoint (EP) function support Frank Li 2023-12-27 18:27 ` Frank Li 2024-01-07 6:26 ` Manivannan Sadhasivam 2024-01-07 6:26 ` Manivannan Sadhasivam 2024-01-08 17:39 ` Frank Li 2024-01-08 17:39 ` Frank Li
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20231227182727.1747435-9-Frank.Li@nxp.com \ --to=frank.li@nxp.com \ --cc=bhelgaas@google.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=helgaas@kernel.org \ --cc=hongxing.zhu@nxp.com \ --cc=imx@lists.linux.dev \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=krzysztof.kozlowski@linaro.org \ --cc=kw@linux.com \ --cc=l.stach@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=lpieralisi@kernel.org \ --cc=manivannan.sadhasivam@linaro.org \ --cc=robh@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.