From: Frank Li <Frank.li@nxp.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: krzysztof.kozlowski@linaro.org, bhelgaas@google.com,
conor+dt@kernel.org, devicetree@vger.kernel.org,
festevam@gmail.com, helgaas@kernel.org, hongxing.zhu@nxp.com,
imx@lists.linux.dev, kernel@pengutronix.de,
krzysztof.kozlowski+dt@linaro.org, kw@linux.com,
l.stach@pengutronix.de, linux-arm-kernel@lists.infradead.org,
linux-imx@nxp.com, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, lpieralisi@kernel.org,
robh@kernel.org, s.hauer@pengutronix.de, shawnguo@kernel.org
Subject: Re: [PATCH v7 07/16] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask
Date: Sun, 7 Jan 2024 00:32:14 -0500 [thread overview]
Message-ID: <ZZo3XpYkzxDolK47@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20240107051655.GF3416@thinkpad>
On Sun, Jan 07, 2024 at 10:46:55AM +0530, Manivannan Sadhasivam wrote:
> On Wed, Dec 27, 2023 at 01:27:18PM -0500, Frank Li wrote:
> > Add drvdata::mode_off and drvdata::mode_mask to simple
>
> simplify
>
> > imx6_pcie_configure_type() logic.
> >
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
>
> Couple of comments below.
>
> > ---
> >
> > Notes:
> > Change from v2 to v3
> > - none
> > Change from v1 to v2
> > - use ffs() to fixe build error.
> >
> > drivers/pci/controller/dwc/pci-imx6.c | 60 ++++++++++++++++++---------
> > 1 file changed, 40 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> > index 588bfb616260e..717e8fa030deb 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -68,6 +68,7 @@ enum imx6_pcie_variants {
> >
> > #define IMX6_PCIE_MAX_CLKS 6
> >
> > +#define IMX6_PCIE_MAX_INSTANCES 2
> > struct imx6_pcie_drvdata {
> > enum imx6_pcie_variants variant;
> > enum dw_pcie_device_mode mode;
> > @@ -77,6 +78,8 @@ struct imx6_pcie_drvdata {
> > const char *clk_names[IMX6_PCIE_MAX_CLKS];
> > const u32 ltssm_off;
> > const u32 ltssm_mask;
> > + const u32 mode_off[IMX6_PCIE_MAX_INSTANCES];
> > + const u32 mode_mask[IMX6_PCIE_MAX_INSTANCES];
> > };
> >
> > struct imx6_pcie {
> > @@ -174,32 +177,25 @@ static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
> >
> > static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
> > {
> > - unsigned int mask, val, mode;
> > + const struct imx6_pcie_drvdata *drvdata = imx6_pcie->drvdata;
> > + unsigned int mask, val, mode, id;
> >
> > - if (imx6_pcie->drvdata->mode == DW_PCIE_EP_TYPE)
> > + if (drvdata->mode == DW_PCIE_EP_TYPE)
> > mode = PCI_EXP_TYPE_ENDPOINT;
> > else
> > mode = PCI_EXP_TYPE_ROOT_PORT;
> >
> > - switch (imx6_pcie->drvdata->variant) {
> > - case IMX8MQ:
> > - case IMX8MQ_EP:
> > - if (imx6_pcie->controller_id == 1) {
> > - mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
> > - val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
> > - mode);
> > - } else {
> > - mask = IMX6Q_GPR12_DEVICE_TYPE;
> > - val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
> > - }
> > - break;
> > - default:
> > - mask = IMX6Q_GPR12_DEVICE_TYPE;
> > - val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
> > - break;
> > - }
> > + id = imx6_pcie->controller_id;
> > +
> > + /* If mode_mask[id] is zero, means each controller have its individual gpr */
> > + if (!drvdata->mode_mask[id])
> > + id = 0;
> > +
> > + mask = drvdata->mode_mask[id];
> > + /* FIELD_PREP mask have been constant */
>
> No need of this comment.
>
> > + val = mode << (ffs(mask) - 1);
> >
> > - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
> > + regmap_update_bits(imx6_pcie->iomuxc_gpr, drvdata->mode_off[id], mask, val);
> > }
> >
> > static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
> > @@ -1376,6 +1372,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > .clk_names = {"pcie_bus", "pcie", "pcie_phy"},
> > .ltssm_off = IOMUXC_GPR12,
> > .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > [IMX6SX] = {
> > .variant = IMX6SX,
> > @@ -1386,6 +1384,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > .clk_names = {"pcie_bus", "pcie", "pcie_phy", "pcie_inbound_axi"},
> > .ltssm_off = IOMUXC_GPR12,
> > .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > [IMX6QP] = {
> > .variant = IMX6QP,
> > @@ -1397,6 +1397,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > .clk_names = {"pcie_bus", "pcie", "pcie_phy"},
> > .ltssm_off = IOMUXC_GPR12,
> > .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > [IMX7D] = {
> > .variant = IMX7D,
> > @@ -1405,6 +1407,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > IMX6_PCIE_FLAG_HAS_PHY_RESET,
> > .gpr = "fsl,imx7d-iomuxc-gpr",
> > .clk_names = {"pcie_bus", "pcie", "pcie_phy"},
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > [IMX8MQ] = {
> > .variant = IMX8MQ,
> > @@ -1412,6 +1416,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > IMX6_PCIE_FLAG_HAS_PHY_RESET,
> > .gpr = "fsl,imx8mq-iomuxc-gpr",
> > .clk_names = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux"},
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > + .mode_off[1] = IOMUXC_GPR12,
> > + .mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
>
> Is the mode_mask differ between SoCs or fixed based on instances? I mean, if
> there is a guarantee that it is going to be IMX6Q_GPR12_DEVICE_TYPE for instance
> 1 and IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE for instance 2 etc...
>
> Then we can avoid these SoC specific config and simplify the code further.
No, iMX95 will change it.
Frank
>
> - Mani
>
> > },
> > [IMX8MM] = {
> > .variant = IMX8MM,
> > @@ -1420,6 +1428,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > IMX6_PCIE_FLAG_HAS_APP_RESET,
> > .gpr = "fsl,imx8mm-iomuxc-gpr",
> > .clk_names = {"pcie_bus", "pcie", "pcie_aux"},
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > [IMX8MP] = {
> > .variant = IMX8MP,
> > @@ -1428,6 +1438,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > IMX6_PCIE_FLAG_HAS_APP_RESET,
> > .gpr = "fsl,imx8mp-iomuxc-gpr",
> > .clk_names = {"pcie_bus", "pcie", "pcie_aux"},
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > [IMX8MQ_EP] = {
> > .variant = IMX8MQ_EP,
> > @@ -1436,6 +1448,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > .mode = DW_PCIE_EP_TYPE,
> > .gpr = "fsl,imx8mq-iomuxc-gpr",
> > .clk_names = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux"},
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > + .mode_off[1] = IOMUXC_GPR12,
> > + .mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
> > },
> > [IMX8MM_EP] = {
> > .variant = IMX8MM_EP,
> > @@ -1443,6 +1459,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > .mode = DW_PCIE_EP_TYPE,
> > .gpr = "fsl,imx8mm-iomuxc-gpr",
> > .clk_names = {"pcie_bus", "pcie", "pcie_aux"},
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > [IMX8MP_EP] = {
> > .variant = IMX8MP_EP,
> > @@ -1450,6 +1468,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > .mode = DW_PCIE_EP_TYPE,
> > .gpr = "fsl,imx8mp-iomuxc-gpr",
> > .clk_names = {"pcie_bus", "pcie", "pcie_aux"},
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > };
> >
> > --
> > 2.34.1
> >
>
> --
> மணிவண்ணன் சதாசிவம்
WARNING: multiple messages have this Message-ID (diff)
From: Frank Li <Frank.li@nxp.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: krzysztof.kozlowski@linaro.org, bhelgaas@google.com,
conor+dt@kernel.org, devicetree@vger.kernel.org,
festevam@gmail.com, helgaas@kernel.org, hongxing.zhu@nxp.com,
imx@lists.linux.dev, kernel@pengutronix.de,
krzysztof.kozlowski+dt@linaro.org, kw@linux.com,
l.stach@pengutronix.de, linux-arm-kernel@lists.infradead.org,
linux-imx@nxp.com, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, lpieralisi@kernel.org,
robh@kernel.org, s.hauer@pengutronix.de, shawnguo@kernel.org
Subject: Re: [PATCH v7 07/16] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask
Date: Sun, 7 Jan 2024 00:32:14 -0500 [thread overview]
Message-ID: <ZZo3XpYkzxDolK47@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20240107051655.GF3416@thinkpad>
On Sun, Jan 07, 2024 at 10:46:55AM +0530, Manivannan Sadhasivam wrote:
> On Wed, Dec 27, 2023 at 01:27:18PM -0500, Frank Li wrote:
> > Add drvdata::mode_off and drvdata::mode_mask to simple
>
> simplify
>
> > imx6_pcie_configure_type() logic.
> >
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
>
> Couple of comments below.
>
> > ---
> >
> > Notes:
> > Change from v2 to v3
> > - none
> > Change from v1 to v2
> > - use ffs() to fixe build error.
> >
> > drivers/pci/controller/dwc/pci-imx6.c | 60 ++++++++++++++++++---------
> > 1 file changed, 40 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> > index 588bfb616260e..717e8fa030deb 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -68,6 +68,7 @@ enum imx6_pcie_variants {
> >
> > #define IMX6_PCIE_MAX_CLKS 6
> >
> > +#define IMX6_PCIE_MAX_INSTANCES 2
> > struct imx6_pcie_drvdata {
> > enum imx6_pcie_variants variant;
> > enum dw_pcie_device_mode mode;
> > @@ -77,6 +78,8 @@ struct imx6_pcie_drvdata {
> > const char *clk_names[IMX6_PCIE_MAX_CLKS];
> > const u32 ltssm_off;
> > const u32 ltssm_mask;
> > + const u32 mode_off[IMX6_PCIE_MAX_INSTANCES];
> > + const u32 mode_mask[IMX6_PCIE_MAX_INSTANCES];
> > };
> >
> > struct imx6_pcie {
> > @@ -174,32 +177,25 @@ static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
> >
> > static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
> > {
> > - unsigned int mask, val, mode;
> > + const struct imx6_pcie_drvdata *drvdata = imx6_pcie->drvdata;
> > + unsigned int mask, val, mode, id;
> >
> > - if (imx6_pcie->drvdata->mode == DW_PCIE_EP_TYPE)
> > + if (drvdata->mode == DW_PCIE_EP_TYPE)
> > mode = PCI_EXP_TYPE_ENDPOINT;
> > else
> > mode = PCI_EXP_TYPE_ROOT_PORT;
> >
> > - switch (imx6_pcie->drvdata->variant) {
> > - case IMX8MQ:
> > - case IMX8MQ_EP:
> > - if (imx6_pcie->controller_id == 1) {
> > - mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
> > - val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
> > - mode);
> > - } else {
> > - mask = IMX6Q_GPR12_DEVICE_TYPE;
> > - val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
> > - }
> > - break;
> > - default:
> > - mask = IMX6Q_GPR12_DEVICE_TYPE;
> > - val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
> > - break;
> > - }
> > + id = imx6_pcie->controller_id;
> > +
> > + /* If mode_mask[id] is zero, means each controller have its individual gpr */
> > + if (!drvdata->mode_mask[id])
> > + id = 0;
> > +
> > + mask = drvdata->mode_mask[id];
> > + /* FIELD_PREP mask have been constant */
>
> No need of this comment.
>
> > + val = mode << (ffs(mask) - 1);
> >
> > - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
> > + regmap_update_bits(imx6_pcie->iomuxc_gpr, drvdata->mode_off[id], mask, val);
> > }
> >
> > static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
> > @@ -1376,6 +1372,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > .clk_names = {"pcie_bus", "pcie", "pcie_phy"},
> > .ltssm_off = IOMUXC_GPR12,
> > .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > [IMX6SX] = {
> > .variant = IMX6SX,
> > @@ -1386,6 +1384,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > .clk_names = {"pcie_bus", "pcie", "pcie_phy", "pcie_inbound_axi"},
> > .ltssm_off = IOMUXC_GPR12,
> > .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > [IMX6QP] = {
> > .variant = IMX6QP,
> > @@ -1397,6 +1397,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > .clk_names = {"pcie_bus", "pcie", "pcie_phy"},
> > .ltssm_off = IOMUXC_GPR12,
> > .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > [IMX7D] = {
> > .variant = IMX7D,
> > @@ -1405,6 +1407,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > IMX6_PCIE_FLAG_HAS_PHY_RESET,
> > .gpr = "fsl,imx7d-iomuxc-gpr",
> > .clk_names = {"pcie_bus", "pcie", "pcie_phy"},
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > [IMX8MQ] = {
> > .variant = IMX8MQ,
> > @@ -1412,6 +1416,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > IMX6_PCIE_FLAG_HAS_PHY_RESET,
> > .gpr = "fsl,imx8mq-iomuxc-gpr",
> > .clk_names = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux"},
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > + .mode_off[1] = IOMUXC_GPR12,
> > + .mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
>
> Is the mode_mask differ between SoCs or fixed based on instances? I mean, if
> there is a guarantee that it is going to be IMX6Q_GPR12_DEVICE_TYPE for instance
> 1 and IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE for instance 2 etc...
>
> Then we can avoid these SoC specific config and simplify the code further.
No, iMX95 will change it.
Frank
>
> - Mani
>
> > },
> > [IMX8MM] = {
> > .variant = IMX8MM,
> > @@ -1420,6 +1428,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > IMX6_PCIE_FLAG_HAS_APP_RESET,
> > .gpr = "fsl,imx8mm-iomuxc-gpr",
> > .clk_names = {"pcie_bus", "pcie", "pcie_aux"},
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > [IMX8MP] = {
> > .variant = IMX8MP,
> > @@ -1428,6 +1438,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > IMX6_PCIE_FLAG_HAS_APP_RESET,
> > .gpr = "fsl,imx8mp-iomuxc-gpr",
> > .clk_names = {"pcie_bus", "pcie", "pcie_aux"},
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > [IMX8MQ_EP] = {
> > .variant = IMX8MQ_EP,
> > @@ -1436,6 +1448,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > .mode = DW_PCIE_EP_TYPE,
> > .gpr = "fsl,imx8mq-iomuxc-gpr",
> > .clk_names = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux"},
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > + .mode_off[1] = IOMUXC_GPR12,
> > + .mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
> > },
> > [IMX8MM_EP] = {
> > .variant = IMX8MM_EP,
> > @@ -1443,6 +1459,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > .mode = DW_PCIE_EP_TYPE,
> > .gpr = "fsl,imx8mm-iomuxc-gpr",
> > .clk_names = {"pcie_bus", "pcie", "pcie_aux"},
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > [IMX8MP_EP] = {
> > .variant = IMX8MP_EP,
> > @@ -1450,6 +1468,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > .mode = DW_PCIE_EP_TYPE,
> > .gpr = "fsl,imx8mp-iomuxc-gpr",
> > .clk_names = {"pcie_bus", "pcie", "pcie_aux"},
> > + .mode_off[0] = IOMUXC_GPR12,
> > + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > };
> >
> > --
> > 2.34.1
> >
>
> --
> மணிவண்ணன் சதாசிவம்
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-01-07 5:32 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-27 18:27 [PATCH v7 00/16] PCI: imx6: Clean up and add imx95 pci support Frank Li
2023-12-27 18:27 ` Frank Li
2023-12-27 18:27 ` [PATCH v7 01/16] PCI: imx6: Simplify clock handling by using bulk_clk_*() function Frank Li
2023-12-27 18:27 ` Frank Li
2024-01-02 8:47 ` Marco Felsch
2024-01-02 8:47 ` Marco Felsch
2024-01-03 17:02 ` Frank Li
2024-01-03 17:02 ` Frank Li
2024-01-04 10:07 ` Marco Felsch
2024-01-04 10:07 ` Marco Felsch
2024-01-06 15:27 ` Manivannan Sadhasivam
2024-01-06 15:27 ` Manivannan Sadhasivam
2024-01-06 16:48 ` Frank Li
2024-01-06 16:48 ` Frank Li
2024-01-07 3:02 ` Manivannan Sadhasivam
2024-01-07 3:02 ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 02/16] PCI: imx6: Simplify phy handling by using by using IMX6_PCIE_FLAG_HAS_PHY Frank Li
2023-12-27 18:27 ` Frank Li
2024-01-06 15:33 ` Manivannan Sadhasivam
2024-01-06 15:33 ` Manivannan Sadhasivam
2024-01-06 16:50 ` Frank Li
2024-01-06 16:50 ` Frank Li
2024-01-07 3:04 ` Manivannan Sadhasivam
2024-01-07 3:04 ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 03/16] PCI: imx6: Simplify reset handling by using by using *_FLAG_HAS_*_RESET Frank Li
2023-12-27 18:27 ` Frank Li
2023-12-27 18:27 ` [PATCH v7 04/16] dt-bindings: imx6q-pcie: Add linux,pci-domain as required for iMX8MQ Frank Li
2023-12-27 18:27 ` Frank Li
2024-01-07 3:15 ` Manivannan Sadhasivam
2024-01-07 3:15 ` Manivannan Sadhasivam
2024-01-07 4:47 ` Frank Li
2024-01-07 4:47 ` Frank Li
2024-01-07 5:19 ` Manivannan Sadhasivam
2024-01-07 5:19 ` Manivannan Sadhasivam
2024-01-07 5:38 ` Frank Li
2024-01-07 5:38 ` Frank Li
2024-01-07 6:29 ` Manivannan Sadhasivam
2024-01-07 6:29 ` Manivannan Sadhasivam
2024-01-09 3:49 ` Rob Herring
2024-01-09 3:49 ` Rob Herring
2024-01-09 3:49 ` Rob Herring
2024-01-09 3:49 ` Rob Herring
2023-12-27 18:27 ` [PATCH v7 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID Frank Li
2023-12-27 18:27 ` Frank Li
2024-01-07 3:22 ` Manivannan Sadhasivam
2024-01-07 3:22 ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 06/16] PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_mask Frank Li
2023-12-27 18:27 ` Frank Li
2024-01-07 3:24 ` Manivannan Sadhasivam
2024-01-07 3:24 ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 07/16] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask Frank Li
2023-12-27 18:27 ` Frank Li
2024-01-07 5:16 ` Manivannan Sadhasivam
2024-01-07 5:16 ` Manivannan Sadhasivam
2024-01-07 5:32 ` Frank Li [this message]
2024-01-07 5:32 ` Frank Li
2024-01-07 5:35 ` Manivannan Sadhasivam
2024-01-07 5:35 ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 08/16] PCI: imx6: Simplify switch-case logic by involve init_phy callback Frank Li
2023-12-27 18:27 ` Frank Li
2024-01-07 5:33 ` Manivannan Sadhasivam
2024-01-07 5:33 ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 09/16] dt-bindings: imx6q-pcie: Clean up irrationality clocks check Frank Li
2023-12-27 18:27 ` Frank Li
2024-01-07 5:34 ` Manivannan Sadhasivam
2024-01-07 5:34 ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 10/16] dt-bindings: imx6q-pcie: restruct reg and reg-name Frank Li
2023-12-27 18:27 ` Frank Li
2024-01-07 5:35 ` Manivannan Sadhasivam
2024-01-07 5:35 ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 11/16] dt-bindings: imx6q-pcie: Add imx95 pcie compatible string Frank Li
2023-12-27 18:27 ` Frank Li
2024-01-02 16:03 ` Rob Herring
2024-01-02 16:03 ` Rob Herring
2023-12-27 18:27 ` [PATCH v7 12/16] PCI: imx6: Add iMX95 PCIe support Frank Li
2023-12-27 18:27 ` Frank Li
2024-01-07 5:51 ` Manivannan Sadhasivam
2024-01-07 5:51 ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 13/16] PCI: imx6: Clean up get addr_space code Frank Li
2023-12-27 18:27 ` Frank Li
2024-01-07 5:55 ` Manivannan Sadhasivam
2024-01-07 5:55 ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 14/16] PCI: imx6: Add epc_features in imx6_pcie_drvdata Frank Li
2023-12-27 18:27 ` Frank Li
2024-01-07 6:16 ` Manivannan Sadhasivam
2024-01-07 6:16 ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 15/16] dt-bindings: imx6q-pcie: Add iMX95 pcie endpoint compatible string Frank Li
2023-12-27 18:27 ` Frank Li
2024-01-09 3:53 ` Rob Herring
2024-01-09 3:53 ` Rob Herring
2023-12-27 18:27 ` [PATCH v7 16/16] PCI: imx6: Add iMX95 Endpoint (EP) function support Frank Li
2023-12-27 18:27 ` Frank Li
2024-01-07 6:26 ` Manivannan Sadhasivam
2024-01-07 6:26 ` Manivannan Sadhasivam
2024-01-08 17:39 ` Frank Li
2024-01-08 17:39 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZZo3XpYkzxDolK47@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=helgaas@kernel.org \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kw@linux.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.