From: "Toke Høiland-Jørgensen" <toke@toke.dk>
To: Michal Kazior <michal.kazior@tieto.com>
Cc: Dave Taht <dave.taht@gmail.com>,
Network Development <netdev@vger.kernel.org>,
linux-wireless <linux-wireless@vger.kernel.org>,
"ath10k\@lists.infradead.org" <ath10k@lists.infradead.org>,
Jasmine Strong <jas@eero.com>,
"codel\@lists.bufferbloat.net" <codel@lists.bufferbloat.net>,
make-wifi-fast@lists.bufferbloat.net
Subject: Re: [RFCv2 0/3] mac80211: implement fq codel
Date: Tue, 22 Mar 2016 10:51:12 +0100 [thread overview]
Message-ID: <8737rirgbz.fsf@toke.dk> (raw)
In-Reply-To: <CA+BoTQ=hgkm2AwMb=kinx+Ezf3vjduCKNH4LNRcV_goDWH4_Vg@mail.gmail.com> (Michal Kazior's message of "Tue, 22 Mar 2016 09:05:32 +0100")
Michal Kazior <michal.kazior@tieto.com> writes:
> traffic-gen generates only BE traffic. Everything else runs UDP_RR
> which doesn't generate a lot of traffic.
Good point. Fixed that: the newest git version of traffic-gen supports a
-t parameter which will be set as the TOS byte on outgoing traffic
(literal; no smart diffserv handling, so you can override the ECN bits
as well).
Added support for a burst-tos test parameter in the Flent burst test
configs which will use this new parameter if set.
-Toke
WARNING: multiple messages have this Message-ID (diff)
From: "Toke Høiland-Jørgensen" <toke@toke.dk>
To: Michal Kazior <michal.kazior@tieto.com>
Cc: Network Development <netdev@vger.kernel.org>,
linux-wireless <linux-wireless@vger.kernel.org>,
"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>,
Jasmine Strong <jas@eero.com>,
"codel@lists.bufferbloat.net" <codel@lists.bufferbloat.net>,
make-wifi-fast@lists.bufferbloat.net
Subject: Re: [RFCv2 0/3] mac80211: implement fq codel
Date: Tue, 22 Mar 2016 10:51:12 +0100 [thread overview]
Message-ID: <8737rirgbz.fsf@toke.dk> (raw)
In-Reply-To: <CA+BoTQ=hgkm2AwMb=kinx+Ezf3vjduCKNH4LNRcV_goDWH4_Vg@mail.gmail.com> (Michal Kazior's message of "Tue, 22 Mar 2016 09:05:32 +0100")
Michal Kazior <michal.kazior@tieto.com> writes:
> traffic-gen generates only BE traffic. Everything else runs UDP_RR
> which doesn't generate a lot of traffic.
Good point. Fixed that: the newest git version of traffic-gen supports a
-t parameter which will be set as the TOS byte on outgoing traffic
(literal; no smart diffserv handling, so you can override the ECN bits
as well).
Added support for a burst-tos test parameter in the Flent burst test
configs which will use this new parameter if set.
-Toke
_______________________________________________
Codel mailing list
Codel@lists.bufferbloat.net
https://lists.bufferbloat.net/listinfo/codel
WARNING: multiple messages have this Message-ID (diff)
From: "Toke Høiland-Jørgensen" <toke@toke.dk>
To: Michal Kazior <michal.kazior@tieto.com>
Cc: Network Development <netdev@vger.kernel.org>,
linux-wireless <linux-wireless@vger.kernel.org>,
Dave Taht <dave.taht@gmail.com>,
"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>,
Jasmine Strong <jas@eero.com>,
"codel@lists.bufferbloat.net" <codel@lists.bufferbloat.net>,
make-wifi-fast@lists.bufferbloat.net
Subject: Re: [RFCv2 0/3] mac80211: implement fq codel
Date: Tue, 22 Mar 2016 10:51:12 +0100 [thread overview]
Message-ID: <8737rirgbz.fsf@toke.dk> (raw)
In-Reply-To: <CA+BoTQ=hgkm2AwMb=kinx+Ezf3vjduCKNH4LNRcV_goDWH4_Vg@mail.gmail.com> (Michal Kazior's message of "Tue, 22 Mar 2016 09:05:32 +0100")
Michal Kazior <michal.kazior@tieto.com> writes:
> traffic-gen generates only BE traffic. Everything else runs UDP_RR
> which doesn't generate a lot of traffic.
Good point. Fixed that: the newest git version of traffic-gen supports a
-t parameter which will be set as the TOS byte on outgoing traffic
(literal; no smart diffserv handling, so you can override the ECN bits
as well).
Added support for a burst-tos test parameter in the Flent burst test
configs which will use this new parameter if set.
-Toke
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2016-03-22 9:51 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-21 17:10 [RFCv2 0/3] mac80211: implement fq codel Dave Taht
2016-03-21 17:10 ` Dave Taht
2016-03-21 17:10 ` Dave Taht
2016-03-22 8:05 ` Michal Kazior
2016-03-22 8:05 ` Michal Kazior
2016-03-22 8:05 ` Michal Kazior
2016-03-22 9:51 ` Toke Høiland-Jørgensen [this message]
2016-03-22 9:51 ` Toke Høiland-Jørgensen
2016-03-22 9:51 ` Toke Høiland-Jørgensen
2016-03-22 14:24 ` Dave Taht
2016-03-22 14:24 ` Dave Taht
-- strict thread matches above, loose matches on Subject: below --
2016-03-16 10:17 Michal Kazior
2016-03-16 10:17 ` Michal Kazior
2016-03-16 10:26 ` Michal Kazior
2016-03-16 10:26 ` Michal Kazior
2016-03-16 15:37 ` Dave Taht
2016-03-16 15:37 ` Dave Taht
2016-03-16 15:37 ` Dave Taht
2016-03-16 18:36 ` Dave Taht
2016-03-16 18:36 ` Dave Taht
2016-03-16 18:36 ` Dave Taht
2016-03-16 18:55 ` Bob Copeland
2016-03-16 18:55 ` Bob Copeland
2016-03-16 18:55 ` Bob Copeland
2016-03-16 19:48 ` Jasmine Strong
2016-03-17 8:55 ` Michal Kazior
2016-03-17 8:55 ` Michal Kazior
2016-03-17 8:55 ` Michal Kazior
2016-03-17 11:12 ` Bob Copeland
2016-03-17 11:12 ` Bob Copeland
2016-03-17 17:00 ` Dave Taht
2016-03-17 17:00 ` Dave Taht
2016-03-17 17:00 ` Dave Taht
2016-03-21 11:57 ` Michal Kazior
2016-03-21 11:57 ` Michal Kazior
2016-03-17 9:43 ` Michal Kazior
2016-03-17 9:43 ` Michal Kazior
2016-03-17 9:43 ` Michal Kazior
2016-03-17 9:03 ` Michal Kazior
2016-03-17 9:03 ` Michal Kazior
2016-03-17 9:03 ` Michal Kazior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8737rirgbz.fsf@toke.dk \
--to=toke@toke.dk \
--cc=ath10k@lists.infradead.org \
--cc=codel@lists.bufferbloat.net \
--cc=dave.taht@gmail.com \
--cc=jas@eero.com \
--cc=linux-wireless@vger.kernel.org \
--cc=make-wifi-fast@lists.bufferbloat.net \
--cc=michal.kazior@tieto.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.