All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Anand, Jerome" <jerome.anand@intel.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
	"intel-gfx@lists.freedesktop.org"
	<intel-gfx@lists.freedesktop.org>,
	"broonie@kernel.org" <broonie@kernel.org>,
	"Ughreja, Rakesh A" <rakesh.a.ughreja@intel.com>
Subject: Re: [PATCH 7/7] ALSA: x86: hdmi: continue playback even when display resolution changes
Date: Thu, 15 Dec 2016 11:14:04 +0000	[thread overview]
Message-ID: <F6867404AABACB4D8EC371BF802A4B7C149346D7@fmsmsx101.amr.corp.intel.com> (raw)
In-Reply-To: <s5hoa0eekby.wl-tiwai@suse.de>



> -----Original Message-----
> From: Takashi Iwai [mailto:tiwai@suse.de]
> Sent: Wednesday, December 14, 2016 6:31 PM
> To: Anand, Jerome <jerome.anand@intel.com>
> Cc: intel-gfx@lists.freedesktop.org; alsa-devel@alsa-project.org;
> ville.syrjala@linux.intel.com; broonie@kernel.org; pierre-
> louis.bossart@linux.intel.com; Ughreja, Rakesh A
> <rakesh.a.ughreja@intel.com>
> Subject: Re: [PATCH 7/7] ALSA: x86: hdmi: continue playback even when
> display resolution changes
> 
> On Mon, 12 Dec 2016 19:10:43 +0100,
> Jerome Anand wrote:
> >
> > When the display resolution changes, the drm disables the display
> > pipes due to which audio rendering stops. At this time, we need to
> > ensure the existing audio pointers and buffers are cleared out so that
> > the playback can restarted once the display pipe is enabled with a
> > different N/CTS values
> >
> > Signed-off-by: Pierre-Louis Bossart
> > <pierre-louis.bossart@linux.intel.com>
> > Signed-off-by: Jerome Anand <jerome.anand@intel.com>
> > ---
> >  sound/x86/intel_hdmi_audio.c | 21 ++++++++++++++++++---
> >  1 file changed, 18 insertions(+), 3 deletions(-)
> >
> > diff --git a/sound/x86/intel_hdmi_audio.c
> > b/sound/x86/intel_hdmi_audio.c index 9249521..d6fd638 100644
> > --- a/sound/x86/intel_hdmi_audio.c
> > +++ b/sound/x86/intel_hdmi_audio.c
> > @@ -43,6 +43,7 @@ static DEFINE_MUTEX(had_mutex);  static int
> > hdmi_card_index = SNDRV_DEFAULT_IDX1;  static char *hdmi_card_id =
> > SNDRV_DEFAULT_STR1;  static struct snd_intelhad *had_data;
> > +static int underrun_count;
> >
> >  module_param(hdmi_card_index, int, 0444);
> > MODULE_PARM_DESC(hdmi_card_index, @@ -1114,6 +1115,7 @@ static
> int
> > snd_intelhad_open(struct snd_pcm_substream *substream)
> >  	intelhaddata = snd_pcm_substream_chip(substream);
> >  	had_stream = intelhaddata->private_data;
> >  	runtime = substream->runtime;
> > +	underrun_count = 0;
> >
> >  	pm_runtime_get(intelhaddata->dev);
> >
> > @@ -1506,10 +1508,23 @@ static snd_pcm_uframes_t
> > snd_intelhad_pcm_pointer(
> >
> >  	buf_id = intelhaddata->curr_buf % 4;
> >  	had_read_register(AUD_BUF_A_LENGTH + (buf_id *
> HAD_REG_WIDTH), &t);
> > -	if (t == 0) {
> > -		pr_debug("discovered buffer done for buf %d\n", buf_id);
> > -		/* had_process_buffer_done(intelhaddata); */
> > +
> > +	if ((t == 0) || (t == ((u32)-1L))) {
> > +		underrun_count++;
> > +		pr_debug("discovered buffer done for buf %d, count =
> %d\n",
> > +			buf_id, underrun_count);
> > +
> > +		if (underrun_count > (HAD_MIN_PERIODS/2)) {
> > +			pr_debug("assume audio_codec_reset, underrun =
> %d - do xrun\n",
> > +				underrun_count);
> > +			underrun_count = 0;
> > +			return SNDRV_PCM_POS_XRUN;
> > +		}
> > +	} else {
> > +		/* Reset Counter */
> > +		underrun_count = 0;
> >  	}
> > +
> >  	t = intelhaddata->buf_info[buf_id].buf_size - t;
> >
> >  	if (intelhaddata->stream_info.buffer_rendered)
> 
> This change itself is OK, but this made me wonder about the driver
> implementation: the current MAX_PB=1 is the hardware limitation or the
> soft limitation?  That is, can't we play back two streams when we connect
> two HDMI monitors?
> 

Two streams was never validated from hardware per se. So setting the limitation in software.

> 
> thanks,
> 
> Takashi
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2016-12-15 11:14 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-12 18:10 [PATCH 0/7] Add support for Legacy HDMI audio drivers Jerome Anand
2016-12-12  6:53 ` ✓ Fi.CI.BAT: success for Add support for Legacy HDMI audio drivers (rev2) Patchwork
2016-12-12 18:10 ` [PATCH 1/7] drm/i915: setup bridge for HDMI LPE audio driver Jerome Anand
2016-12-14 11:43   ` Takashi Iwai
2016-12-15  6:06     ` Anand, Jerome
2016-12-14 12:52   ` Daniel Vetter
2016-12-14 13:03     ` Takashi Iwai
2016-12-15  6:10     ` Anand, Jerome
2016-12-15 19:04     ` [alsa-devel] " Pierre-Louis Bossart
2016-12-12 18:10 ` [PATCH 2/7] drm/i915: Add support for audio driver notifications Jerome Anand
2016-12-14 11:50   ` Takashi Iwai
2016-12-15 10:18     ` Anand, Jerome
2016-12-15 11:48       ` Ville Syrjälä
2016-12-14 12:55   ` Daniel Vetter
2016-12-14 13:13     ` Takashi Iwai
2016-12-15 19:32       ` Pierre-Louis Bossart
2016-12-15 10:21     ` Anand, Jerome
2016-12-12 18:10 ` [PATCH 3/7] ALSA: add shell for Intel HDMI LPE audio driver Jerome Anand
2016-12-14 12:45   ` Takashi Iwai
2016-12-15 10:55     ` Anand, Jerome
2016-12-15 11:14       ` Takashi Iwai
2016-12-15 11:44         ` Mark Brown
2016-12-15 20:37         ` [alsa-devel] " Pierre-Louis Bossart
2016-12-15 21:01           ` Takashi Iwai
2016-12-12 18:10 ` [PATCH 4/7] ALSA: x86: hdmi: Add audio support for BYT and CHT Jerome Anand
2016-12-14 12:56   ` Takashi Iwai
2016-12-15 11:08     ` Anand, Jerome
2016-12-12 18:10 ` [PATCH 5/7] ALSA: x86: hdmi: Improve position reporting Jerome Anand
2016-12-14 12:57   ` Takashi Iwai
2016-12-14 14:09     ` Pierre-Louis Bossart
2016-12-14 14:36       ` Takashi Iwai
2016-12-14 23:39         ` [alsa-devel] " Pierre-Louis Bossart
2016-12-12 18:10 ` [PATCH 6/7] ALSA: x86: hdmi: Fixup some monitor Jerome Anand
2016-12-14 12:58   ` Takashi Iwai
2016-12-12 18:10 ` [PATCH 7/7] ALSA: x86: hdmi: continue playback even when display resolution changes Jerome Anand
2016-12-14 13:01   ` Takashi Iwai
2016-12-15 11:14     ` Anand, Jerome [this message]
2016-12-15 20:44       ` [alsa-devel] " Pierre-Louis Bossart
2016-12-14 11:07 ` [PATCH 0/7] Add support for Legacy HDMI audio drivers Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=F6867404AABACB4D8EC371BF802A4B7C149346D7@fmsmsx101.amr.corp.intel.com \
    --to=jerome.anand@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=rakesh.a.ughreja@intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.