[U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select

[Marek Vasut <marex@denx.de>]

On 1/11/19 9:39 PM, Simon Goldschmidt wrote:
> Am 07.01.2019 um 23:53 schrieb Marek Vasut:
>> On 1/7/19 10:14 PM, Simon Goldschmidt wrote:
>>> In order to build a smaller SPL, let's imply SPL_DM_RESET and
>>> SPL_WATCHDOG_SUPPORT instead of selecting them, so they can be disabled
>>> via defconfig.
>>>
>>> This also seems to be required to use OF_PLATDATA, as the reset drivers
>>> don't seem to work with it.
>>
>> How do you un-reset IP blocks if you disable the reset controller ?
> 
> I found that out just now: there's the function
> 'reset_deassert_peripherals_handoff()' in spl_gen5.c that should
> "De-assert reset for peripherals and bridges based on handoff". However,
> at least for Gen5, it just writes a 0 to rstmgr->permodrst. By doing
> that, it enables *ALL* peripherals on the SoC (except for some DMA
> channels that aren't really used) :-)
> 
> I guess that needs some cleaning up as well ;-)

Yes

> I think the proper thing to do here would be to remove this function and
> convert all drivers to provide appropriate 'resets' properties in the dts?

Indeed

-- 
Best regards,
Marek Vasut