All of lore.kernel.org
 help / color / mirror / Atom feed
From: yanhong wang <yanhong.wang@starfivetech.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	<linux-riscv@lists.infradead.org>, <netdev@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: "David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	Richard Cochran <richardcochran@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Peter Geis <pgwipeout@gmail.com>
Subject: Re: [PATCH v4 6/7] riscv: dts: starfive: jh7110: Add ethernet device node
Date: Fri, 3 Feb 2023 15:40:09 +0800	[thread overview]
Message-ID: <048b3ab0-7c13-b7f7-403c-f4e1d5574a10@starfivetech.com> (raw)
In-Reply-To: <870f6ec5-5378-760b-7a30-324ee2d178cf@linaro.org>



On 2023/2/3 15:09, Krzysztof Kozlowski wrote:
> On 03/02/2023 04:14, yanhong wang wrote:
>> 
>> 
>> On 2023/1/18 23:51, Krzysztof Kozlowski wrote:
>>> On 18/01/2023 07:17, Yanhong Wang wrote:
>>>> Add JH7110 ethernet device node to support gmac driver for the JH7110
>>>> RISC-V SoC.
>>>>
>>>> Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
>>>> ---
>>>>  arch/riscv/boot/dts/starfive/jh7110.dtsi | 93 ++++++++++++++++++++++++
>>>>  1 file changed, 93 insertions(+)
>>>>
>>>> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
>>>> index c22e8f1d2640..c6de6e3b1a25 100644
>>>> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
>>>> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
>>>> @@ -433,5 +433,98 @@
>>>>  			reg-shift = <2>;
>>>>  			status = "disabled";
>>>>  		};
>>>> +
>>>> +		stmmac_axi_setup: stmmac-axi-config {
>>>
>>> Why your bindings example is different?
>>>
>> 
>> There are two gmacs on the StarFive VF2 board, and the two
>> gmacs use the same configuration on axi, so the 
>> stmmac_axi_setup is independent, which is different
>> from the bindings example.
>> 
>> 
>>> Were the bindings tested? Ahh, no they were not... Can you send only
>>> tested patches?
>>>
>>> Was this tested?
>>>
>> Yes, the bindings have been tested on the StarFive VF2 board and work normally.
> 
> Then please tell me how did you test the bindings on the board? How is
> it even possible and how the board is related to bindings? As you could
> easily see from Rob's reply they fail, so I have doubts that they were
> tested. If you still claim they were - please paste the output from
> testing command.
> 

Sorry, I didn't check all the bindings, only the modified ones, the command 
used is as follows: 
"make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/snps,dwmac.yaml"
"make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml"

> 
> Best regards,
> Krzysztof
> 

WARNING: multiple messages have this Message-ID (diff)
From: yanhong wang <yanhong.wang@starfivetech.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	<linux-riscv@lists.infradead.org>, <netdev@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: "David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	Richard Cochran <richardcochran@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Peter Geis <pgwipeout@gmail.com>
Subject: Re: [PATCH v4 6/7] riscv: dts: starfive: jh7110: Add ethernet device node
Date: Fri, 3 Feb 2023 15:40:09 +0800	[thread overview]
Message-ID: <048b3ab0-7c13-b7f7-403c-f4e1d5574a10@starfivetech.com> (raw)
In-Reply-To: <870f6ec5-5378-760b-7a30-324ee2d178cf@linaro.org>



On 2023/2/3 15:09, Krzysztof Kozlowski wrote:
> On 03/02/2023 04:14, yanhong wang wrote:
>> 
>> 
>> On 2023/1/18 23:51, Krzysztof Kozlowski wrote:
>>> On 18/01/2023 07:17, Yanhong Wang wrote:
>>>> Add JH7110 ethernet device node to support gmac driver for the JH7110
>>>> RISC-V SoC.
>>>>
>>>> Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
>>>> ---
>>>>  arch/riscv/boot/dts/starfive/jh7110.dtsi | 93 ++++++++++++++++++++++++
>>>>  1 file changed, 93 insertions(+)
>>>>
>>>> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
>>>> index c22e8f1d2640..c6de6e3b1a25 100644
>>>> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
>>>> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
>>>> @@ -433,5 +433,98 @@
>>>>  			reg-shift = <2>;
>>>>  			status = "disabled";
>>>>  		};
>>>> +
>>>> +		stmmac_axi_setup: stmmac-axi-config {
>>>
>>> Why your bindings example is different?
>>>
>> 
>> There are two gmacs on the StarFive VF2 board, and the two
>> gmacs use the same configuration on axi, so the 
>> stmmac_axi_setup is independent, which is different
>> from the bindings example.
>> 
>> 
>>> Were the bindings tested? Ahh, no they were not... Can you send only
>>> tested patches?
>>>
>>> Was this tested?
>>>
>> Yes, the bindings have been tested on the StarFive VF2 board and work normally.
> 
> Then please tell me how did you test the bindings on the board? How is
> it even possible and how the board is related to bindings? As you could
> easily see from Rob's reply they fail, so I have doubts that they were
> tested. If you still claim they were - please paste the output from
> testing command.
> 

Sorry, I didn't check all the bindings, only the modified ones, the command 
used is as follows: 
"make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/snps,dwmac.yaml"
"make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml"

> 
> Best regards,
> Krzysztof
> 

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2023-02-03  7:40 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-18  6:16 [PATCH v4 0/7] Add Ethernet driver for StarFive JH7110 SoC Yanhong Wang
2023-01-18  6:16 ` Yanhong Wang
2023-01-18  6:16 ` [PATCH v4 1/7] dt-bindings: net: snps,dwmac: Add dwmac-5.20 version Yanhong Wang
2023-01-18  6:16   ` Yanhong Wang
2023-01-18  6:16 ` [PATCH v4 2/7] dt-bindings: net: snps,dwmac: Update the maxitems number of resets and reset-names Yanhong Wang
2023-01-18  6:16   ` Yanhong Wang
2023-01-18 13:10   ` Rob Herring
2023-01-18 13:10     ` Rob Herring
2023-01-18 15:46   ` Krzysztof Kozlowski
2023-01-18 15:46     ` Krzysztof Kozlowski
2023-01-18 15:47   ` Krzysztof Kozlowski
2023-01-18 15:47     ` Krzysztof Kozlowski
2023-02-07  2:43     ` yanhong wang
2023-02-07  2:43       ` yanhong wang
2023-02-07  7:59       ` Krzysztof Kozlowski
2023-02-07  7:59         ` Krzysztof Kozlowski
2023-02-15  7:46         ` yanhong wang
2023-02-15  7:46           ` yanhong wang
2023-02-16  8:13           ` Krzysztof Kozlowski
2023-02-16  8:13             ` Krzysztof Kozlowski
2023-01-18  6:16 ` [PATCH v4 3/7] net: stmmac: platform: Add snps,dwmac-5.20 IP compatible string Yanhong Wang
2023-01-18  6:16   ` Yanhong Wang
2023-01-18  6:16 ` [PATCH v4 4/7] dt-bindings: net: Add support StarFive dwmac Yanhong Wang
2023-01-18  6:16   ` Yanhong Wang
2023-01-18 15:49   ` Krzysztof Kozlowski
2023-01-18 15:49     ` Krzysztof Kozlowski
2023-02-03  5:58     ` yanhong wang
2023-02-03  5:58       ` yanhong wang
2023-01-18  6:16 ` [PATCH v4 5/7] net: stmmac: Add glue layer for StarFive JH7110 SoCs Yanhong Wang
2023-01-18  6:16   ` Yanhong Wang
2023-02-16 10:53   ` Emil Renner Berthing
2023-02-16 10:53     ` Emil Renner Berthing
2023-02-21  2:27     ` yanhong wang
2023-02-21  2:27       ` yanhong wang
2023-02-26 15:15       ` Emil Renner Berthing
2023-02-26 15:15         ` Emil Renner Berthing
2023-01-18  6:17 ` [PATCH v4 6/7] riscv: dts: starfive: jh7110: Add ethernet device node Yanhong Wang
2023-01-18  6:17   ` Yanhong Wang
2023-01-18 15:51   ` Krzysztof Kozlowski
2023-01-18 15:51     ` Krzysztof Kozlowski
2023-02-03  3:14     ` yanhong wang
2023-02-03  3:14       ` yanhong wang
2023-02-03  7:09       ` Krzysztof Kozlowski
2023-02-03  7:09         ` Krzysztof Kozlowski
2023-02-03  7:40         ` yanhong wang [this message]
2023-02-03  7:40           ` yanhong wang
2023-02-03  7:56           ` Krzysztof Kozlowski
2023-02-03  7:56             ` Krzysztof Kozlowski
2023-02-03  9:01             ` yanhong wang
2023-02-03  9:01               ` yanhong wang
2023-02-20 14:22   ` Emil Renner Berthing
2023-02-20 14:22     ` Emil Renner Berthing
2023-02-20 15:00     ` Emil Renner Berthing
2023-02-20 15:00       ` Emil Renner Berthing
2023-01-18  6:17 ` [PATCH v4 7/7] riscv: dts: starfive: visionfive-v2: Enable gmac device tree node Yanhong Wang
2023-01-18  6:17   ` Yanhong Wang
2023-02-20 14:05   ` Emil Renner Berthing
2023-02-20 14:05     ` Emil Renner Berthing
2023-01-18 23:21 ` [PATCH v4 0/7] Add Ethernet driver for StarFive JH7110 SoC Conor Dooley
2023-01-18 23:21   ` Conor Dooley
2023-02-03  3:02   ` yanhong wang
2023-02-03  3:02     ` yanhong wang
2023-02-04 14:22     ` Conor Dooley
2023-02-04 14:22       ` Conor Dooley
2023-02-04 17:16       ` Andrew Lunn
2023-02-04 17:16         ` Andrew Lunn
2023-02-05 10:11         ` Conor Dooley
2023-02-05 10:11           ` Conor Dooley
2023-02-06  1:15         ` yanhong wang
2023-02-06  1:15           ` yanhong wang
2023-02-06  1:05       ` yanhong wang
2023-02-06  1:05         ` yanhong wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=048b3ab0-7c13-b7f7-403c-f4e1d5574a10@starfivetech.com \
    --to=yanhong.wang@starfivetech.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=kernel@esmil.dk \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=pgwipeout@gmail.com \
    --cc=richardcochran@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.