All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robin Murphy <robin.murphy@arm.com>
To: Nadav Amit <nadav.amit@gmail.com>, Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>, Jiajun Cao <caojiajun@vmware.com>,
	Lu Baolu <baolu.lu@linux.intel.com>,
	iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 3/6] iommu: Improve iommu_iotlb_gather helpers
Date: Tue, 15 Jun 2021 11:42:34 +0100	[thread overview]
Message-ID: <07969028-d807-cad1-2a01-8efc87390157@arm.com> (raw)
In-Reply-To: <20210607182541.119756-4-namit@vmware.com>

On 2021-06-07 19:25, Nadav Amit wrote:
> From: Robin Murphy <robin.murphy@arm.com>
> 
> The Mediatek driver is not the only one which might want a basic
> address-based gathering behaviour, so although it's arguably simple
> enough to open-code, let's factor it out for the sake of cleanliness.
> Let's also take this opportunity to document the intent of these
> helpers for clarity.
> 
> Cc: Joerg Roedel <joro@8bytes.org>
> Cc: Will Deacon <will@kernel.org>
> Cc: Jiajun Cao <caojiajun@vmware.com>
> Cc: Robin Murphy <robin.murphy@arm.com>
> Cc: Lu Baolu <baolu.lu@linux.intel.com>
> Cc: iommu@lists.linux-foundation.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Robin Murphy <robin.murphy@arm.com>

Nit: missing your signoff.

> ---
> 
> Changes from Robin's version:
> * Added iommu_iotlb_gather_add_range() stub !CONFIG_IOMMU_API

Out of curiosity, is there any config in which a stub is actually 
needed? Unlike iommu_iotlb_gather_init(), I would have thought that 
these helpers should only ever be called by driver code which already 
depends on IOMMU_API.

Thanks,
Robin.

> * Use iommu_iotlb_gather_add_range() in iommu_iotlb_gather_add_page()
> ---
>   drivers/iommu/mtk_iommu.c |  5 +----
>   include/linux/iommu.h     | 43 ++++++++++++++++++++++++++++++++++-----
>   2 files changed, 39 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index e06b8a0e2b56..0af4a91ac7da 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -523,10 +523,7 @@ static size_t mtk_iommu_unmap(struct iommu_domain *domain,
>   	struct mtk_iommu_domain *dom = to_mtk_domain(domain);
>   	unsigned long end = iova + size - 1;
>   
> -	if (gather->start > iova)
> -		gather->start = iova;
> -	if (gather->end < end)
> -		gather->end = end;
> +	iommu_iotlb_gather_add_range(gather, iova, size);
>   	return dom->iop->unmap(dom->iop, iova, size, gather);
>   }
>   
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index 32d448050bf7..f254c62f3720 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -497,6 +497,38 @@ static inline void iommu_iotlb_sync(struct iommu_domain *domain,
>   	iommu_iotlb_gather_init(iotlb_gather);
>   }
>   
> +/**
> + * iommu_iotlb_gather_add_range - Gather for address-based TLB invalidation
> + * @gather: TLB gather data
> + * @iova: start of page to invalidate
> + * @size: size of page to invalidate
> + *
> + * Helper for IOMMU drivers to build arbitrarily-sized invalidation commands
> + * where only the address range matters, and simply minimising intermediate
> + * syncs is preferred.
> + */
> +static inline void iommu_iotlb_gather_add_range(struct iommu_iotlb_gather *gather,
> +						unsigned long iova, size_t size)
> +{
> +	unsigned long end = iova + size - 1;
> +
> +	if (gather->start > iova)
> +		gather->start = iova;
> +	if (gather->end < end)
> +		gather->end = end;
> +}
> +
> +/**
> + * iommu_iotlb_gather_add_page - Gather for page-based TLB invalidation
> + * @domain: IOMMU domain to be invalidated
> + * @gather: TLB gather data
> + * @iova: start of page to invalidate
> + * @size: size of page to invalidate
> + *
> + * Helper for IOMMU drivers to build invalidation commands based on individual
> + * pages, or with page size/table level hints which cannot be gathered if they
> + * differ.
> + */
>   static inline void iommu_iotlb_gather_add_page(struct iommu_domain *domain,
>   					       struct iommu_iotlb_gather *gather,
>   					       unsigned long iova, size_t size)
> @@ -515,11 +547,7 @@ static inline void iommu_iotlb_gather_add_page(struct iommu_domain *domain,
>   		gather->pgsize = size;
>   	}
>   
> -	if (gather->end < end)
> -		gather->end = end;
> -
> -	if (gather->start > start)
> -		gather->start = start;
> +	iommu_iotlb_gather_add_range(gather, iova, size);
>   }
>   
>   /* PCI device grouping function */
> @@ -702,6 +730,11 @@ static inline void iommu_iotlb_sync(struct iommu_domain *domain,
>   {
>   }
>   
> +static inline void iommu_iotlb_gather_add_range(struct iommu_iotlb_gather *gather,
> +						unsigned long iova, size_t size)
> +{
> +}
> +
>   static inline phys_addr_t iommu_iova_to_phys(struct iommu_domain *domain, dma_addr_t iova)
>   {
>   	return 0;
> 

WARNING: multiple messages have this Message-ID (diff)
From: Robin Murphy <robin.murphy@arm.com>
To: Nadav Amit <nadav.amit@gmail.com>, Joerg Roedel <joro@8bytes.org>
Cc: linux-kernel@vger.kernel.org, iommu@lists.linux-foundation.org,
	Will Deacon <will@kernel.org>, Jiajun Cao <caojiajun@vmware.com>
Subject: Re: [PATCH v3 3/6] iommu: Improve iommu_iotlb_gather helpers
Date: Tue, 15 Jun 2021 11:42:34 +0100	[thread overview]
Message-ID: <07969028-d807-cad1-2a01-8efc87390157@arm.com> (raw)
In-Reply-To: <20210607182541.119756-4-namit@vmware.com>

On 2021-06-07 19:25, Nadav Amit wrote:
> From: Robin Murphy <robin.murphy@arm.com>
> 
> The Mediatek driver is not the only one which might want a basic
> address-based gathering behaviour, so although it's arguably simple
> enough to open-code, let's factor it out for the sake of cleanliness.
> Let's also take this opportunity to document the intent of these
> helpers for clarity.
> 
> Cc: Joerg Roedel <joro@8bytes.org>
> Cc: Will Deacon <will@kernel.org>
> Cc: Jiajun Cao <caojiajun@vmware.com>
> Cc: Robin Murphy <robin.murphy@arm.com>
> Cc: Lu Baolu <baolu.lu@linux.intel.com>
> Cc: iommu@lists.linux-foundation.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Robin Murphy <robin.murphy@arm.com>

Nit: missing your signoff.

> ---
> 
> Changes from Robin's version:
> * Added iommu_iotlb_gather_add_range() stub !CONFIG_IOMMU_API

Out of curiosity, is there any config in which a stub is actually 
needed? Unlike iommu_iotlb_gather_init(), I would have thought that 
these helpers should only ever be called by driver code which already 
depends on IOMMU_API.

Thanks,
Robin.

> * Use iommu_iotlb_gather_add_range() in iommu_iotlb_gather_add_page()
> ---
>   drivers/iommu/mtk_iommu.c |  5 +----
>   include/linux/iommu.h     | 43 ++++++++++++++++++++++++++++++++++-----
>   2 files changed, 39 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index e06b8a0e2b56..0af4a91ac7da 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -523,10 +523,7 @@ static size_t mtk_iommu_unmap(struct iommu_domain *domain,
>   	struct mtk_iommu_domain *dom = to_mtk_domain(domain);
>   	unsigned long end = iova + size - 1;
>   
> -	if (gather->start > iova)
> -		gather->start = iova;
> -	if (gather->end < end)
> -		gather->end = end;
> +	iommu_iotlb_gather_add_range(gather, iova, size);
>   	return dom->iop->unmap(dom->iop, iova, size, gather);
>   }
>   
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index 32d448050bf7..f254c62f3720 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -497,6 +497,38 @@ static inline void iommu_iotlb_sync(struct iommu_domain *domain,
>   	iommu_iotlb_gather_init(iotlb_gather);
>   }
>   
> +/**
> + * iommu_iotlb_gather_add_range - Gather for address-based TLB invalidation
> + * @gather: TLB gather data
> + * @iova: start of page to invalidate
> + * @size: size of page to invalidate
> + *
> + * Helper for IOMMU drivers to build arbitrarily-sized invalidation commands
> + * where only the address range matters, and simply minimising intermediate
> + * syncs is preferred.
> + */
> +static inline void iommu_iotlb_gather_add_range(struct iommu_iotlb_gather *gather,
> +						unsigned long iova, size_t size)
> +{
> +	unsigned long end = iova + size - 1;
> +
> +	if (gather->start > iova)
> +		gather->start = iova;
> +	if (gather->end < end)
> +		gather->end = end;
> +}
> +
> +/**
> + * iommu_iotlb_gather_add_page - Gather for page-based TLB invalidation
> + * @domain: IOMMU domain to be invalidated
> + * @gather: TLB gather data
> + * @iova: start of page to invalidate
> + * @size: size of page to invalidate
> + *
> + * Helper for IOMMU drivers to build invalidation commands based on individual
> + * pages, or with page size/table level hints which cannot be gathered if they
> + * differ.
> + */
>   static inline void iommu_iotlb_gather_add_page(struct iommu_domain *domain,
>   					       struct iommu_iotlb_gather *gather,
>   					       unsigned long iova, size_t size)
> @@ -515,11 +547,7 @@ static inline void iommu_iotlb_gather_add_page(struct iommu_domain *domain,
>   		gather->pgsize = size;
>   	}
>   
> -	if (gather->end < end)
> -		gather->end = end;
> -
> -	if (gather->start > start)
> -		gather->start = start;
> +	iommu_iotlb_gather_add_range(gather, iova, size);
>   }
>   
>   /* PCI device grouping function */
> @@ -702,6 +730,11 @@ static inline void iommu_iotlb_sync(struct iommu_domain *domain,
>   {
>   }
>   
> +static inline void iommu_iotlb_gather_add_range(struct iommu_iotlb_gather *gather,
> +						unsigned long iova, size_t size)
> +{
> +}
> +
>   static inline phys_addr_t iommu_iova_to_phys(struct iommu_domain *domain, dma_addr_t iova)
>   {
>   	return 0;
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  parent reply	other threads:[~2021-06-15 10:43 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-07 18:25 [PATCH v3 0/6] iommu/amd: Enable page-selective flushes Nadav Amit
2021-06-07 18:25 ` Nadav Amit
2021-06-07 18:25 ` [PATCH v3 1/6] iommu/amd: Selective flush on unmap Nadav Amit
2021-06-07 18:25   ` Nadav Amit
2021-06-07 18:25 ` [PATCH v3 2/6] iommu/amd: Do not use flush-queue when NpCache is on Nadav Amit
2021-06-07 18:25   ` Nadav Amit
2021-06-15 13:08   ` Robin Murphy
2021-06-15 13:08     ` Robin Murphy
2021-06-15 18:26     ` Nadav Amit
2021-06-15 18:26       ` Nadav Amit
2021-06-15 19:36       ` Robin Murphy
2021-06-15 19:36         ` Robin Murphy
2021-06-07 18:25 ` [PATCH v3 3/6] iommu: Improve iommu_iotlb_gather helpers Nadav Amit
2021-06-07 18:25   ` Nadav Amit
2021-06-11 13:50   ` Will Deacon
2021-06-11 13:50     ` Will Deacon
2021-06-15 10:42   ` Robin Murphy [this message]
2021-06-15 10:42     ` Robin Murphy
2021-06-15 19:05     ` Nadav Amit
2021-06-15 19:05       ` Nadav Amit
2021-06-15 19:07       ` Nadav Amit
2021-06-15 19:07         ` Nadav Amit
2021-06-15 12:29   ` Yong Wu
2021-06-15 12:29     ` Yong Wu
2021-06-15 12:41     ` Robin Murphy
2021-06-15 12:41       ` Robin Murphy
2021-06-07 18:25 ` [PATCH v3 4/6] iommu: Factor iommu_iotlb_gather_is_disjoint() out Nadav Amit
2021-06-07 18:25   ` Nadav Amit
2021-06-11 13:57   ` Will Deacon
2021-06-11 13:57     ` Will Deacon
2021-06-11 16:50     ` Nadav Amit
2021-06-11 16:50       ` Nadav Amit
2021-06-15 10:29       ` Will Deacon
2021-06-15 10:29         ` Will Deacon
2021-06-15 18:54         ` Nadav Amit
2021-06-15 18:54           ` Nadav Amit
2021-06-07 18:25 ` [PATCH v3 5/6] iommu/amd: Tailored gather logic for AMD Nadav Amit
2021-06-07 18:25   ` Nadav Amit
2021-06-15 12:55   ` Robin Murphy
2021-06-15 12:55     ` Robin Murphy
2021-06-15 18:14     ` Nadav Amit
2021-06-15 18:14       ` Nadav Amit
2021-06-15 19:20       ` Robin Murphy
2021-06-15 19:20         ` Robin Murphy
2021-06-15 19:46         ` Nadav Amit
2021-06-15 19:46           ` Nadav Amit
2021-06-07 18:25 ` [PATCH v3 6/6] iommu/amd: Sync once for scatter-gather operations Nadav Amit
2021-06-07 18:25   ` Nadav Amit
2021-06-15 11:25   ` Robin Murphy
2021-06-15 11:25     ` Robin Murphy
2021-06-15 18:51     ` Nadav Amit
2021-06-15 18:51       ` Nadav Amit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=07969028-d807-cad1-2a01-8efc87390157@arm.com \
    --to=robin.murphy@arm.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=caojiajun@vmware.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nadav.amit@gmail.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.