* [U-Boot] [PATCH v1 1/2] board: toradex: colibri_vf: efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATION @ 2018-11-07 22:39 Marcel Ziswiler 2018-11-07 22:39 ` [U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target Marcel Ziswiler 2018-11-07 23:37 ` [U-Boot] [PATCH v1 1/2] board: toradex: colibri_vf: efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATION Alexander Graf 0 siblings, 2 replies; 12+ messages in thread From: Marcel Ziswiler @ 2018-11-07 22:39 UTC (permalink / raw) To: u-boot From: Marcel Ziswiler <marcel.ziswiler@toradex.com> Unset CONFIG_EFI_UNICODE_CAPITALIZATION on boards with tough size restrictions. This is analogous to commit a90bf07afc43 ("efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATION"). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> --- configs/colibri_vf_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig index 5854910f7b..38f450c8ed 100644 --- a/configs/colibri_vf_defconfig +++ b/configs/colibri_vf_defconfig @@ -72,3 +72,4 @@ CONFIG_VIDEO_FSL_DCU_FB=y CONFIG_VIDEO=y CONFIG_SYS_CONSOLE_FG_COL=0x00 CONFIG_OF_LIBFDT_OVERLAY=y +# CONFIG_EFI_UNICODE_CAPITALIZATION is not set -- 2.14.5 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target 2018-11-07 22:39 [U-Boot] [PATCH v1 1/2] board: toradex: colibri_vf: efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATION Marcel Ziswiler @ 2018-11-07 22:39 ` Marcel Ziswiler 2018-11-08 1:55 ` Fabio Estevam 2018-11-07 23:37 ` [U-Boot] [PATCH v1 1/2] board: toradex: colibri_vf: efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATION Alexander Graf 1 sibling, 1 reply; 12+ messages in thread From: Marcel Ziswiler @ 2018-11-07 22:39 UTC (permalink / raw) To: u-boot From: Marcel Ziswiler <marcel.ziswiler@toradex.com> The make macro to check if the binary exceeds the board size limit is taken straight from the root Makefile. Without this and e.g. enabled EFI Vybrid fails booting as the regular size limit check does not take the final u-boot.imx binary size into account which is bigger due to alignment as well as IMX header stuff. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> --- arch/arm/mach-imx/Makefile | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 72fe23a2b9..53d9e5f42b 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -58,6 +58,21 @@ obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o obj-$(CONFIG_CMD_DEKBLOB) += cmd_dek.o endif +ifneq ($(CONFIG_BOARD_SIZE_LIMIT),) +BOARD_SIZE_CHECK = \ + @actual=`wc -c $@ | awk '{print $$1}'`; \ + limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \ + if test $$actual -gt $$limit; then \ + echo "$@ exceeds file size limit:" >&2 ; \ + echo " limit: $$limit bytes" >&2 ; \ + echo " actual: $$actual bytes" >&2 ; \ + echo " excess: $$((actual - limit)) bytes" >&2; \ + exit 1; \ + fi +else +BOARD_SIZE_CHECK = +endif + PLUGIN = board/$(BOARDDIR)/plugin ifeq ($(CONFIG_USE_IMXIMG_PLUGIN),y) @@ -101,6 +116,7 @@ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE $(call if_changed,mkimage) + $(BOARD_SIZE_CHECK) ifeq ($(CONFIG_OF_SEPARATE),y) MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \ -- 2.14.5 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target 2018-11-07 22:39 ` [U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target Marcel Ziswiler @ 2018-11-08 1:55 ` Fabio Estevam 2018-11-08 8:43 ` Stefano Babic 2018-11-08 14:07 ` Stefano Babic 0 siblings, 2 replies; 12+ messages in thread From: Fabio Estevam @ 2018-11-08 1:55 UTC (permalink / raw) To: u-boot [Adding Stefano] On Wed, Nov 7, 2018 at 8:41 PM Marcel Ziswiler <marcel@ziswiler.com> wrote: > > From: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > The make macro to check if the binary exceeds the board size limit is > taken straight from the root Makefile. > > Without this and e.g. enabled EFI Vybrid fails booting as the regular > size limit check does not take the final u-boot.imx binary size into > account which is bigger due to alignment as well as IMX header stuff. > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Hi Stefano, maybe this could be material for 2018.11? Thanks ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target 2018-11-08 1:55 ` Fabio Estevam @ 2018-11-08 8:43 ` Stefano Babic 2018-11-08 12:13 ` Tom Rini 2018-11-08 14:07 ` Stefano Babic 1 sibling, 1 reply; 12+ messages in thread From: Stefano Babic @ 2018-11-08 8:43 UTC (permalink / raw) To: u-boot On 08/11/18 02:55, Fabio Estevam wrote: > [Adding Stefano] > > On Wed, Nov 7, 2018 at 8:41 PM Marcel Ziswiler <marcel@ziswiler.com> wrote: >> >> From: Marcel Ziswiler <marcel.ziswiler@toradex.com> >> >> The make macro to check if the binary exceeds the board size limit is >> taken straight from the root Makefile. >> >> Without this and e.g. enabled EFI Vybrid fails booting as the regular >> size limit check does not take the final u-boot.imx binary size into >> account which is bigger due to alignment as well as IMX header stuff. >> >> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > Reviewed-by: Fabio Estevam <festevam@gmail.com> > > Hi Stefano, maybe this could be material for 2018.11? > > Thanks > It makes sense - Tom, could you pick this up or do you prefer a formal PR ? Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de ===================================================================== ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target 2018-11-08 8:43 ` Stefano Babic @ 2018-11-08 12:13 ` Tom Rini 0 siblings, 0 replies; 12+ messages in thread From: Tom Rini @ 2018-11-08 12:13 UTC (permalink / raw) To: u-boot On Thu, Nov 08, 2018 at 09:43:56AM +0100, Stefano Babic wrote: > On 08/11/18 02:55, Fabio Estevam wrote: > > [Adding Stefano] > > > > On Wed, Nov 7, 2018 at 8:41 PM Marcel Ziswiler <marcel@ziswiler.com> wrote: > >> > >> From: Marcel Ziswiler <marcel.ziswiler@toradex.com> > >> > >> The make macro to check if the binary exceeds the board size limit is > >> taken straight from the root Makefile. > >> > >> Without this and e.g. enabled EFI Vybrid fails booting as the regular > >> size limit check does not take the final u-boot.imx binary size into > >> account which is bigger due to alignment as well as IMX header stuff. > >> > >> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > > > Reviewed-by: Fabio Estevam <festevam@gmail.com> > > > > Hi Stefano, maybe this could be material for 2018.11? > > > > Thanks > > > > It makes sense - Tom, could you pick this up or do you prefer a formal PR ? PR please, thanks. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181108/64bc157e/attachment.sig> ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target 2018-11-08 1:55 ` Fabio Estevam 2018-11-08 8:43 ` Stefano Babic @ 2018-11-08 14:07 ` Stefano Babic 2018-11-09 9:18 ` Marcel Ziswiler 2018-11-09 14:35 ` Marcel Ziswiler 1 sibling, 2 replies; 12+ messages in thread From: Stefano Babic @ 2018-11-08 14:07 UTC (permalink / raw) To: u-boot Hi Marcel, On 08/11/18 02:55, Fabio Estevam wrote: > [Adding Stefano] > > On Wed, Nov 7, 2018 at 8:41 PM Marcel Ziswiler <marcel@ziswiler.com> wrote: >> >> From: Marcel Ziswiler <marcel.ziswiler@toradex.com> >> >> The make macro to check if the binary exceeds the board size limit is >> taken straight from the root Makefile. >> >> Without this and e.g. enabled EFI Vybrid fails booting as the regular >> size limit check does not take the final u-boot.imx binary size into >> account which is bigger due to alignment as well as IMX header stuff. >> >> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > Reviewed-by: Fabio Estevam <festevam@gmail.com> > > Hi Stefano, maybe this could be material for 2018.11? > Added both patches to u-boot-imx, check is effective, now size is too much and build fails: Building current source for 1 boards (1 thread, 8 jobs per thread) arm: + colibri_vf +u-boot.imx exceeds file size limit: + limit: 520192 bytes + actual: 526104 bytes + excess: 5912 bytes +make[2]: *** [u-boot.imx] Error 1 +make[1]: *** [u-boot.imx] Error 2 +make: *** [sub-make] Error 2 0 0 1 /1 colibri_vf Can you take a look ? Best regards, Stefeano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de ===================================================================== ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target 2018-11-08 14:07 ` Stefano Babic @ 2018-11-09 9:18 ` Marcel Ziswiler 2018-11-09 9:41 ` Alexander Graf 2018-11-09 14:35 ` Marcel Ziswiler 1 sibling, 1 reply; 12+ messages in thread From: Marcel Ziswiler @ 2018-11-09 9:18 UTC (permalink / raw) To: u-boot Hi Stefano On Thu, 2018-11-08 at 15:07 +0100, Stefano Babic wrote: > Hi Marcel, > > On 08/11/18 02:55, Fabio Estevam wrote: > > [Adding Stefano] > > > > On Wed, Nov 7, 2018 at 8:41 PM Marcel Ziswiler <marcel@ziswiler.com > > > wrote: > > > > > > From: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > > > > > The make macro to check if the binary exceeds the board size > > > limit is > > > taken straight from the root Makefile. > > > > > > Without this and e.g. enabled EFI Vybrid fails booting as the > > > regular > > > size limit check does not take the final u-boot.imx binary size > > > into > > > account which is bigger due to alignment as well as IMX header > > > stuff. > > > > > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > > > Reviewed-by: Fabio Estevam <festevam@gmail.com> > > > > Hi Stefano, maybe this could be material for 2018.11? > > > > Added both patches to u-boot-imx, check is effective, now size is too > much and build fails: > > > Building current source for 1 boards (1 thread, 8 jobs per thread) > arm: + colibri_vf > +u-boot.imx exceeds file size limit: > + limit: 520192 bytes > + actual: 526104 bytes > + excess: 5912 bytes > +make[2]: *** [u-boot.imx] Error 1 > +make[1]: *** [u-boot.imx] Error 2 > +make: *** [sub-make] Error 2 > 0 0 1 /1 colibri_vf > > Can you take a look ? Sure, what kind of a tool chain are you using? Might just be that the GCC 8.2 I was using does a better job in optimising stuff. Yep, with GCC 7.3.1 it also fails at my end! I guess then we have to drop EFI entirely but I doubt Mr. Graf will be happy... > Best regards, > Stefeano Cheers Marcel ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target 2018-11-09 9:18 ` Marcel Ziswiler @ 2018-11-09 9:41 ` Alexander Graf 2018-11-09 10:23 ` Marcel Ziswiler 0 siblings, 1 reply; 12+ messages in thread From: Alexander Graf @ 2018-11-09 9:41 UTC (permalink / raw) To: u-boot On 11/09/2018 10:18 AM, Marcel Ziswiler wrote: > Hi Stefano > > On Thu, 2018-11-08 at 15:07 +0100, Stefano Babic wrote: >> Hi Marcel, >> >> On 08/11/18 02:55, Fabio Estevam wrote: >>> [Adding Stefano] >>> >>> On Wed, Nov 7, 2018 at 8:41 PM Marcel Ziswiler <marcel@ziswiler.com >>>> wrote: >>>> >>>> From: Marcel Ziswiler <marcel.ziswiler@toradex.com> >>>> >>>> The make macro to check if the binary exceeds the board size >>>> limit is >>>> taken straight from the root Makefile. >>>> >>>> Without this and e.g. enabled EFI Vybrid fails booting as the >>>> regular >>>> size limit check does not take the final u-boot.imx binary size >>>> into >>>> account which is bigger due to alignment as well as IMX header >>>> stuff. >>>> >>>> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> >>> Reviewed-by: Fabio Estevam <festevam@gmail.com> >>> >>> Hi Stefano, maybe this could be material for 2018.11? >>> >> Added both patches to u-boot-imx, check is effective, now size is too >> much and build fails: >> >> >> Building current source for 1 boards (1 thread, 8 jobs per thread) >> arm: + colibri_vf >> +u-boot.imx exceeds file size limit: >> + limit: 520192 bytes >> + actual: 526104 bytes >> + excess: 5912 bytes >> +make[2]: *** [u-boot.imx] Error 1 >> +make[1]: *** [u-boot.imx] Error 2 >> +make: *** [sub-make] Error 2 >> 0 0 1 /1 colibri_vf >> >> Can you take a look ? > Sure, what kind of a tool chain are you using? Might just be that the > GCC 8.2 I was using does a better job in optimising stuff. Yep, with > GCC 7.3.1 it also fails at my end! I guess then we have to drop EFI > entirely but I doubt Mr. Graf will be happy... I definitely wouldn't be happy, but I've seen us run into tight situations with Vybrid before. So yes, if your platform really a) doesn't want to ever support EBBR and b) really has very tight size constraints, disabling EFI_LOADER is perfectly fine with me. Alex ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target 2018-11-09 9:41 ` Alexander Graf @ 2018-11-09 10:23 ` Marcel Ziswiler 0 siblings, 0 replies; 12+ messages in thread From: Marcel Ziswiler @ 2018-11-09 10:23 UTC (permalink / raw) To: u-boot On Fri, 2018-11-09 at 10:41 +0100, Alexander Graf wrote: > On 11/09/2018 10:18 AM, Marcel Ziswiler wrote: > > Hi Stefano > > > > On Thu, 2018-11-08 at 15:07 +0100, Stefano Babic wrote: > > > Hi Marcel, > > > > > > On 08/11/18 02:55, Fabio Estevam wrote: > > > > [Adding Stefano] > > > > > > > > On Wed, Nov 7, 2018 at 8:41 PM Marcel Ziswiler <marcel@ziswiler > > > > .com > > > > > wrote: > > > > > > > > > > From: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > > > > > > > > > The make macro to check if the binary exceeds the board size > > > > > limit is > > > > > taken straight from the root Makefile. > > > > > > > > > > Without this and e.g. enabled EFI Vybrid fails booting as the > > > > > regular > > > > > size limit check does not take the final u-boot.imx binary > > > > > size > > > > > into > > > > > account which is bigger due to alignment as well as IMX > > > > > header > > > > > stuff. > > > > > > > > > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > > > > > > > Reviewed-by: Fabio Estevam <festevam@gmail.com> > > > > > > > > Hi Stefano, maybe this could be material for 2018.11? > > > > > > > > > > Added both patches to u-boot-imx, check is effective, now size is > > > too > > > much and build fails: > > > > > > > > > Building current source for 1 boards (1 thread, 8 jobs per > > > thread) > > > arm: + colibri_vf > > > +u-boot.imx exceeds file size limit: > > > + limit: 520192 bytes > > > + actual: 526104 bytes > > > + excess: 5912 bytes > > > +make[2]: *** [u-boot.imx] Error 1 > > > +make[1]: *** [u-boot.imx] Error 2 > > > +make: *** [sub-make] Error 2 > > > 0 0 1 /1 colibri_vf > > > > > > Can you take a look ? > > > > Sure, what kind of a tool chain are you using? Might just be that > > the > > GCC 8.2 I was using does a better job in optimising stuff. Yep, > > with > > GCC 7.3.1 it also fails at my end! I guess then we have to drop EFI > > entirely but I doubt Mr. Graf will be happy... > > I definitely wouldn't be happy, but I've seen us run into tight > situations with Vybrid before. So yes, if your platform really a) > doesn't want to ever support EBBR and b) really has very tight size > constraints, disabling EFI_LOADER is perfectly fine with me. Yes, I'm fully aware of EBBR having attended Grant's talk in Edinburgh but especially those older raw NAND platforms are probably not the best candidates for any of this. Unless, of course, we would put some more effort transitioning them all to SPL and what not to overcome e.g. such SRAM limitations. I will send a v2 which disables EFI for now. > Alex Cheers Marcel ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target 2018-11-08 14:07 ` Stefano Babic 2018-11-09 9:18 ` Marcel Ziswiler @ 2018-11-09 14:35 ` Marcel Ziswiler 2018-11-12 11:57 ` Stefano Babic 1 sibling, 1 reply; 12+ messages in thread From: Marcel Ziswiler @ 2018-11-09 14:35 UTC (permalink / raw) To: u-boot Hi Stefano On Thu, 2018-11-08 at 15:07 +0100, Stefano Babic wrote: > Hi Marcel, > > On 08/11/18 02:55, Fabio Estevam wrote: > > [Adding Stefano] > > > > On Wed, Nov 7, 2018 at 8:41 PM Marcel Ziswiler <marcel@ziswiler.com > > > wrote: > > > > > > From: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > > > > > The make macro to check if the binary exceeds the board size > > > limit is > > > taken straight from the root Makefile. > > > > > > Without this and e.g. enabled EFI Vybrid fails booting as the > > > regular > > > size limit check does not take the final u-boot.imx binary size > > > into > > > account which is bigger due to alignment as well as IMX header > > > stuff. > > > > > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > > > Reviewed-by: Fabio Estevam <festevam@gmail.com> > > > > Hi Stefano, maybe this could be material for 2018.11? > > > > Added both patches to u-boot-imx, check is effective, now size is too > much and build fails: > > > Building current source for 1 boards (1 thread, 8 jobs per thread) > arm: + colibri_vf > +u-boot.imx exceeds file size limit: > + limit: 520192 bytes > + actual: 526104 bytes > + excess: 5912 bytes > +make[2]: *** [u-boot.imx] Error 1 > +make[1]: *** [u-boot.imx] Error 2 > +make: *** [sub-make] Error 2 > 0 0 1 /1 colibri_vf > > Can you take a look ? I sent a v2 additionally dropping CONFIG_CMDLINE_EDITING and SPI support saving another 8 Kb which for me makes it work right back to GCC 6.1.1 which I believe is anyway about as far back as one can go even compiling U-Boot. Can you please give that another go? > Best regards, > Stefeano Cheers Marcel ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target 2018-11-09 14:35 ` Marcel Ziswiler @ 2018-11-12 11:57 ` Stefano Babic 0 siblings, 0 replies; 12+ messages in thread From: Stefano Babic @ 2018-11-12 11:57 UTC (permalink / raw) To: u-boot On 09/11/18 15:35, Marcel Ziswiler wrote: > Hi Stefano > > On Thu, 2018-11-08 at 15:07 +0100, Stefano Babic wrote: >> Hi Marcel, >> >> On 08/11/18 02:55, Fabio Estevam wrote: >>> [Adding Stefano] >>> >>> On Wed, Nov 7, 2018 at 8:41 PM Marcel Ziswiler <marcel@ziswiler.com >>>> wrote: >>>> >>>> From: Marcel Ziswiler <marcel.ziswiler@toradex.com> >>>> >>>> The make macro to check if the binary exceeds the board size >>>> limit is >>>> taken straight from the root Makefile. >>>> >>>> Without this and e.g. enabled EFI Vybrid fails booting as the >>>> regular >>>> size limit check does not take the final u-boot.imx binary size >>>> into >>>> account which is bigger due to alignment as well as IMX header >>>> stuff. >>>> >>>> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> >>> >>> Reviewed-by: Fabio Estevam <festevam@gmail.com> >>> >>> Hi Stefano, maybe this could be material for 2018.11? >>> >> >> Added both patches to u-boot-imx, check is effective, now size is too >> much and build fails: >> >> >> Building current source for 1 boards (1 thread, 8 jobs per thread) >> arm: + colibri_vf >> +u-boot.imx exceeds file size limit: >> + limit: 520192 bytes >> + actual: 526104 bytes >> + excess: 5912 bytes >> +make[2]: *** [u-boot.imx] Error 1 >> +make[1]: *** [u-boot.imx] Error 2 >> +make: *** [sub-make] Error 2 >> 0 0 1 /1 colibri_vf >> >> Can you take a look ? > > I sent a v2 additionally dropping CONFIG_CMDLINE_EDITING and SPI > support saving another 8 Kb which for me makes it work right back to > GCC 6.1.1 which I believe is anyway about as far back as one can go > even compiling U-Boot. Can you please give that another go? Merged the patchset, it works in my build. I will send PR to Tom. Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de ===================================================================== ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v1 1/2] board: toradex: colibri_vf: efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATION 2018-11-07 22:39 [U-Boot] [PATCH v1 1/2] board: toradex: colibri_vf: efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATION Marcel Ziswiler 2018-11-07 22:39 ` [U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target Marcel Ziswiler @ 2018-11-07 23:37 ` Alexander Graf 1 sibling, 0 replies; 12+ messages in thread From: Alexander Graf @ 2018-11-07 23:37 UTC (permalink / raw) To: u-boot On 07.11.18 23:39, Marcel Ziswiler wrote: > From: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > Unset CONFIG_EFI_UNICODE_CAPITALIZATION on boards with tough size > restrictions. > > This is analogous to commit a90bf07afc43 > ("efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATION"). > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Alexander Graf <agraf@suse.de> Alex ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2018-11-12 11:57 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-11-07 22:39 [U-Boot] [PATCH v1 1/2] board: toradex: colibri_vf: efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATION Marcel Ziswiler 2018-11-07 22:39 ` [U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target Marcel Ziswiler 2018-11-08 1:55 ` Fabio Estevam 2018-11-08 8:43 ` Stefano Babic 2018-11-08 12:13 ` Tom Rini 2018-11-08 14:07 ` Stefano Babic 2018-11-09 9:18 ` Marcel Ziswiler 2018-11-09 9:41 ` Alexander Graf 2018-11-09 10:23 ` Marcel Ziswiler 2018-11-09 14:35 ` Marcel Ziswiler 2018-11-12 11:57 ` Stefano Babic 2018-11-07 23:37 ` [U-Boot] [PATCH v1 1/2] board: toradex: colibri_vf: efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATION Alexander Graf
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.