[PATCH] drm/panel-simple: fix connector type for LogicPD Type28 Display

[PATCH] drm/panel-simple: fix connector type for LogicPD Type28 Display

[Adam Ford]

The LogicPD Type28 display used by several Logic PD products has not
worked since v5.5.

The connector type for the LogicPD Type 28 display is missing and
drm_panel_bridge_add() requires connector type to be set.

Signed-off-by: Adam Ford <aford173@gmail.com>
CC: stable@vger.kernel.org #v5.5+

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index b6ecd1552132..334e9de5b2c8 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2495,6 +2495,7 @@ static const struct panel_desc logicpd_type_28 = {
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
 	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
 		     DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
 };
 
 static const struct panel_desc mitsubishi_aa070mc01 = {
-- 
2.17.1

[PATCH] drm/panel-simple: fix connector type for LogicPD Type28 Display

[Adam Ford]

The LogicPD Type28 display used by several Logic PD products has not
worked since v5.5.

The connector type for the LogicPD Type 28 display is missing and
drm_panel_bridge_add() requires connector type to be set.

Signed-off-by: Adam Ford <aford173@gmail.com>
CC: stable@vger.kernel.org #v5.5+

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index b6ecd1552132..334e9de5b2c8 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2495,6 +2495,7 @@ static const struct panel_desc logicpd_type_28 = {
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
 	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
 		     DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
 };
 
 static const struct panel_desc mitsubishi_aa070mc01 = {
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH] drm/panel-simple: fix connector type for LogicPD Type28 Display

[Fabio Estevam]

On Mon, Jun 15, 2020 at 10:19 AM Adam Ford <aford173@gmail.com> wrote:
>
> The LogicPD Type28 display used by several Logic PD products has not
> worked since v5.5.

Maybe you could tell which commit exactly and then put a Fixes tag?

Re: [PATCH] drm/panel-simple: fix connector type for LogicPD Type28 Display

[Fabio Estevam]

On Mon, Jun 15, 2020 at 10:19 AM Adam Ford <aford173@gmail.com> wrote:
>
> The LogicPD Type28 display used by several Logic PD products has not
> worked since v5.5.

Maybe you could tell which commit exactly and then put a Fixes tag?
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH] drm/panel-simple: fix connector type for LogicPD Type28 Display

[Adam Ford]

On Mon, Jun 15, 2020 at 9:46 AM Fabio Estevam <festevam@gmail.com> wrote:
>
> On Mon, Jun 15, 2020 at 10:19 AM Adam Ford <aford173@gmail.com> wrote:
> >
> > The LogicPD Type28 display used by several Logic PD products has not
> > worked since v5.5.
>
> Maybe you could tell which commit exactly and then put a Fixes tag?

I honestly don't know.  I reached out to the omap mailing list,
because I noted this issue. Tomi V from TI responded with a link that
he posted which fixes this for another display.

https://www.mail-archive.com/dri-devel@lists.freedesktop.org/msg312208.html

I tested that patch and it worked for a different LCD, so I did the
same thing to the Logic PD Type 28 display as well.

My patch and commit message were modeled after his, and his commit
CC's stable with a note about being required for v5.5+

I added him to the CC list, so maybe he knows which hash needs to be
referenced from a fixes tag.  I was hoping to not have to go back and
bisect if it's not required, but I will if necessary.


adam

Re: [PATCH] drm/panel-simple: fix connector type for LogicPD Type28 Display

[Adam Ford]

On Mon, Jun 15, 2020 at 9:46 AM Fabio Estevam <festevam@gmail.com> wrote:
>
> On Mon, Jun 15, 2020 at 10:19 AM Adam Ford <aford173@gmail.com> wrote:
> >
> > The LogicPD Type28 display used by several Logic PD products has not
> > worked since v5.5.
>
> Maybe you could tell which commit exactly and then put a Fixes tag?

I honestly don't know.  I reached out to the omap mailing list,
because I noted this issue. Tomi V from TI responded with a link that
he posted which fixes this for another display.

https://www.mail-archive.com/dri-devel@lists.freedesktop.org/msg312208.html

I tested that patch and it worked for a different LCD, so I did the
same thing to the Logic PD Type 28 display as well.

My patch and commit message were modeled after his, and his commit
CC's stable with a note about being required for v5.5+

I added him to the CC list, so maybe he knows which hash needs to be
referenced from a fixes tag.  I was hoping to not have to go back and
bisect if it's not required, but I will if necessary.


adam
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH] drm/panel-simple: fix connector type for LogicPD Type28 Display

[Tomi Valkeinen]

On 15/06/2020 17:53, Adam Ford wrote:
> On Mon, Jun 15, 2020 at 9:46 AM Fabio Estevam <festevam@gmail.com> wrote:
>>
>> On Mon, Jun 15, 2020 at 10:19 AM Adam Ford <aford173@gmail.com> wrote:
>>>
>>> The LogicPD Type28 display used by several Logic PD products has not
>>> worked since v5.5.
>>
>> Maybe you could tell which commit exactly and then put a Fixes tag?
> 
> I honestly don't know.  I reached out to the omap mailing list,
> because I noted this issue. Tomi V from TI responded with a link that
> he posted which fixes this for another display.
> 
> https://www.mail-archive.com/dri-devel@lists.freedesktop.org/msg312208.html
> 
> I tested that patch and it worked for a different LCD, so I did the
> same thing to the Logic PD Type 28 display as well.
> 
> My patch and commit message were modeled after his, and his commit
> CC's stable with a note about being required for v5.5+
> 
> I added him to the CC list, so maybe he knows which hash needs to be
> referenced from a fixes tag.  I was hoping to not have to go back and
> bisect if it's not required, but I will if necessary.

No, I didn't check when exactly it broke. connector_type was added in v5.5, and my patch applies to 
v5.5, so I set that as stable version. But the WARN comes from panel bridge. Possibly 
89958b7cd9555a5d82556cc9a1f4c62fffda6f96 is the one that adds requirement to have connector_type.

  Tomi

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Re: [PATCH] drm/panel-simple: fix connector type for LogicPD Type28 Display

[Tomi Valkeinen]

On 15/06/2020 17:53, Adam Ford wrote:
> On Mon, Jun 15, 2020 at 9:46 AM Fabio Estevam <festevam@gmail.com> wrote:
>>
>> On Mon, Jun 15, 2020 at 10:19 AM Adam Ford <aford173@gmail.com> wrote:
>>>
>>> The LogicPD Type28 display used by several Logic PD products has not
>>> worked since v5.5.
>>
>> Maybe you could tell which commit exactly and then put a Fixes tag?
> 
> I honestly don't know.  I reached out to the omap mailing list,
> because I noted this issue. Tomi V from TI responded with a link that
> he posted which fixes this for another display.
> 
> https://www.mail-archive.com/dri-devel@lists.freedesktop.org/msg312208.html
> 
> I tested that patch and it worked for a different LCD, so I did the
> same thing to the Logic PD Type 28 display as well.
> 
> My patch and commit message were modeled after his, and his commit
> CC's stable with a note about being required for v5.5+
> 
> I added him to the CC list, so maybe he knows which hash needs to be
> referenced from a fixes tag.  I was hoping to not have to go back and
> bisect if it's not required, but I will if necessary.

No, I didn't check when exactly it broke. connector_type was added in v5.5, and my patch applies to 
v5.5, so I set that as stable version. But the WARN comes from panel bridge. Possibly 
89958b7cd9555a5d82556cc9a1f4c62fffda6f96 is the one that adds requirement to have connector_type.

  Tomi

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH] drm/panel-simple: fix connector type for LogicPD Type28 Display

[Sam Ravnborg]

Hi Adam.

On Mon, Jun 15, 2020 at 09:53:45AM -0500, Adam Ford wrote:
> On Mon, Jun 15, 2020 at 9:46 AM Fabio Estevam <festevam@gmail.com> wrote:
> >
> > On Mon, Jun 15, 2020 at 10:19 AM Adam Ford <aford173@gmail.com> wrote:
> > >
> > > The LogicPD Type28 display used by several Logic PD products has not
> > > worked since v5.5.
> >
> > Maybe you could tell which commit exactly and then put a Fixes tag?
> 
> I honestly don't know.  I reached out to the omap mailing list,
> because I noted this issue. Tomi V from TI responded with a link that
> he posted which fixes this for another display.
> 
> https://www.mail-archive.com/dri-devel@lists.freedesktop.org/msg312208.html
> 
> I tested that patch and it worked for a different LCD, so I did the
> same thing to the Logic PD Type 28 display as well.
> 
> My patch and commit message were modeled after his, and his commit
> CC's stable with a note about being required for v5.5+
> 
> I added him to the CC list, so maybe he knows which hash needs to be
> referenced from a fixes tag.  I was hoping to not have to go back and
> bisect if it's not required, but I will if necessary.

git blame is your friend - the panel was added here:
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2469) static const struct panel_desc logicpd_type_28 = {
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2470)  .modes = &logicpd_type_28_mode,
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2471)  .num_modes = 1,
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2472)  .bpc = 8,
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2473)  .size = {
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2474)          .width = 105,
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2475)          .height = 67,
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2476)  },

So this gives us fllowing fixes info:
Fixes: 0d35408afbeb ("drm/panel: simple: Add Logic PD Type 28 display support")
Cc: Adam Ford <aford173@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.6+

I have adjusted the changelog to say 5.6 and applied to drm-misc-fixes

	Sam

Re: [PATCH] drm/panel-simple: fix connector type for LogicPD Type28 Display

[Sam Ravnborg]

Hi Adam.

On Mon, Jun 15, 2020 at 09:53:45AM -0500, Adam Ford wrote:
> On Mon, Jun 15, 2020 at 9:46 AM Fabio Estevam <festevam@gmail.com> wrote:
> >
> > On Mon, Jun 15, 2020 at 10:19 AM Adam Ford <aford173@gmail.com> wrote:
> > >
> > > The LogicPD Type28 display used by several Logic PD products has not
> > > worked since v5.5.
> >
> > Maybe you could tell which commit exactly and then put a Fixes tag?
> 
> I honestly don't know.  I reached out to the omap mailing list,
> because I noted this issue. Tomi V from TI responded with a link that
> he posted which fixes this for another display.
> 
> https://www.mail-archive.com/dri-devel@lists.freedesktop.org/msg312208.html
> 
> I tested that patch and it worked for a different LCD, so I did the
> same thing to the Logic PD Type 28 display as well.
> 
> My patch and commit message were modeled after his, and his commit
> CC's stable with a note about being required for v5.5+
> 
> I added him to the CC list, so maybe he knows which hash needs to be
> referenced from a fixes tag.  I was hoping to not have to go back and
> bisect if it's not required, but I will if necessary.

git blame is your friend - the panel was added here:
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2469) static const struct panel_desc logicpd_type_28 = {
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2470)  .modes = &logicpd_type_28_mode,
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2471)  .num_modes = 1,
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2472)  .bpc = 8,
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2473)  .size = {
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2474)          .width = 105,
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2475)          .height = 67,
0d35408afbeb6 (Adam Ford               2019-10-16 08:51:45 -0500 2476)  },

So this gives us fllowing fixes info:
Fixes: 0d35408afbeb ("drm/panel: simple: Add Logic PD Type 28 display support")
Cc: Adam Ford <aford173@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.6+

I have adjusted the changelog to say 5.6 and applied to drm-misc-fixes

	Sam
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel