[PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig
@ 2021-09-12 19:39 Oleksandr Suvorov
  2021-09-15  2:15 ` Peng Fan (OSS)
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Oleksandr Suvorov @ 2021-09-12 19:39 UTC (permalink / raw)
  To: u-boot
  Cc: Marcel Ziswiler, Philippe Schenker, Max Krummenacher,
	Oleksandr Suvorov, Heiko Schocher, Igor Opaniuk,
	Patrick Delaunay, Simon Glass

Move setting the default boot command to the
apalis/colibri_imx6_defconfig. It allows replacing the command
without code modification.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
---

 configs/apalis_imx6_defconfig  | 1 +
 configs/colibri_imx6_defconfig | 1 +
 include/configs/apalis_imx6.h  | 4 ----
 include/configs/colibri_imx6.h | 4 ----
 4 files changed, 2 insertions(+), 8 deletions(-)

diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
index a0e85ba23a4..a2e0f8e3936 100644
--- a/configs/apalis_imx6_defconfig
+++ b/configs/apalis_imx6_defconfig
@@ -23,6 +23,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=1
+CONFIG_BOOTCOMMAND="run distro_bootcmd;usb start;setenv stdout serial,vidconsole;setenv stdin serial,usbkbd"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_BOARD_EARLY_INIT_F=y
diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
index 47b1cfb1917..bee4e7edd63 100644
--- a/configs/colibri_imx6_defconfig
+++ b/configs/colibri_imx6_defconfig
@@ -22,6 +22,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=1
+CONFIG_BOOTCOMMAND="run distro_bootcmd;usb start;setenv stdout serial,vidconsole;setenv stdin serial,usbkbd"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_BOARD_EARLY_INIT_F=y
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 12de0105c6c..ade479cb943 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -133,10 +133,6 @@
 #endif
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
-	"bootcmd=run distro_bootcmd ; " \
-		"usb start ; " \
-		"setenv stdout serial,vidconsole; " \
-		"setenv stdin serial,usbkbd\0" \
 	"boot_file=zImage\0" \
 	"console=ttymxc0\0" \
 	"defargs=enable_wait_mode=off vmalloc=400M\0" \
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 804a144a03e..f91d6b49ea8 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -115,10 +115,6 @@
 #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
-	"bootcmd=run distro_bootcmd; " \
-		"usb start ; " \
-		"setenv stdout serial,vidconsole; " \
-		"setenv stdin serial,usbkbd\0" \
 	"boot_file=zImage\0" \
 	"console=ttymxc0\0" \
 	"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig
  2021-09-12 19:39 [PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig Oleksandr Suvorov
@ 2021-09-15  2:15 ` Peng Fan (OSS)
  2021-09-15 16:06 ` Igor Opaniuk
  2021-09-15 20:11 ` Marcel Ziswiler
  2 siblings, 0 replies; 5+ messages in thread
From: Peng Fan (OSS) @ 2021-09-15  2:15 UTC (permalink / raw)
  To: Oleksandr Suvorov, u-boot
  Cc: Marcel Ziswiler, Philippe Schenker, Max Krummenacher,
	Heiko Schocher, Igor Opaniuk, Patrick Delaunay, Simon Glass



On 2021/9/13 3:39, Oleksandr Suvorov wrote:
> Move setting the default boot command to the
> apalis/colibri_imx6_defconfig. It allows replacing the command
> without code modification.
> 
> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
> ---
> 
>   configs/apalis_imx6_defconfig  | 1 +
>   configs/colibri_imx6_defconfig | 1 +
>   include/configs/apalis_imx6.h  | 4 ----
>   include/configs/colibri_imx6.h | 4 ----
>   4 files changed, 2 insertions(+), 8 deletions(-)
> 
> diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
> index a0e85ba23a4..a2e0f8e3936 100644
> --- a/configs/apalis_imx6_defconfig
> +++ b/configs/apalis_imx6_defconfig
> @@ -23,6 +23,7 @@ CONFIG_DISTRO_DEFAULTS=y
>   CONFIG_FIT=y
>   CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
>   CONFIG_BOOTDELAY=1
> +CONFIG_BOOTCOMMAND="run distro_bootcmd;usb start;setenv stdout serial,vidconsole;setenv stdin serial,usbkbd"
>   # CONFIG_DISPLAY_BOARDINFO is not set
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_BOARD_EARLY_INIT_F=y
> diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
> index 47b1cfb1917..bee4e7edd63 100644
> --- a/configs/colibri_imx6_defconfig
> +++ b/configs/colibri_imx6_defconfig
> @@ -22,6 +22,7 @@ CONFIG_DISTRO_DEFAULTS=y
>   CONFIG_FIT=y
>   CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
>   CONFIG_BOOTDELAY=1
> +CONFIG_BOOTCOMMAND="run distro_bootcmd;usb start;setenv stdout serial,vidconsole;setenv stdin serial,usbkbd"
>   # CONFIG_DISPLAY_BOARDINFO is not set
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_BOARD_EARLY_INIT_F=y
> diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
> index 12de0105c6c..ade479cb943 100644
> --- a/include/configs/apalis_imx6.h
> +++ b/include/configs/apalis_imx6.h
> @@ -133,10 +133,6 @@
>   #endif
>   #define CONFIG_EXTRA_ENV_SETTINGS \
>   	BOOTENV \
> -	"bootcmd=run distro_bootcmd ; " \
> -		"usb start ; " \
> -		"setenv stdout serial,vidconsole; " \
> -		"setenv stdin serial,usbkbd\0" \
>   	"boot_file=zImage\0" \
>   	"console=ttymxc0\0" \
>   	"defargs=enable_wait_mode=off vmalloc=400M\0" \
> diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
> index 804a144a03e..f91d6b49ea8 100644
> --- a/include/configs/colibri_imx6.h
> +++ b/include/configs/colibri_imx6.h
> @@ -115,10 +115,6 @@
>   #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
>   #define CONFIG_EXTRA_ENV_SETTINGS \
>   	BOOTENV \
> -	"bootcmd=run distro_bootcmd; " \
> -		"usb start ; " \
> -		"setenv stdout serial,vidconsole; " \
> -		"setenv stdin serial,usbkbd\0" \
>   	"boot_file=zImage\0" \
>   	"console=ttymxc0\0" \
>   	"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
> 

Reviewed-by: Peng Fan <peng.fna@nxp.com>

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig
  2021-09-12 19:39 [PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig Oleksandr Suvorov
  2021-09-15  2:15 ` Peng Fan (OSS)
@ 2021-09-15 16:06 ` Igor Opaniuk
  2021-09-15 20:11 ` Marcel Ziswiler
  2 siblings, 0 replies; 5+ messages in thread
From: Igor Opaniuk @ 2021-09-15 16:06 UTC (permalink / raw)
  To: Oleksandr Suvorov
  Cc: U-Boot Mailing List, Marcel Ziswiler, Philippe Schenker,
	Max Krummenacher, Heiko Schocher, Igor Opaniuk, Patrick Delaunay,
	Simon Glass

On Sun, Sep 12, 2021 at 10:39 PM Oleksandr Suvorov
<oleksandr.suvorov@foundries.io> wrote:
>
> Move setting the default boot command to the
> apalis/colibri_imx6_defconfig. It allows replacing the command
> without code modification.
>
> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
> ---
>
>  configs/apalis_imx6_defconfig  | 1 +
>  configs/colibri_imx6_defconfig | 1 +
>  include/configs/apalis_imx6.h  | 4 ----
>  include/configs/colibri_imx6.h | 4 ----
>  4 files changed, 2 insertions(+), 8 deletions(-)
>
> diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
> index a0e85ba23a4..a2e0f8e3936 100644
> --- a/configs/apalis_imx6_defconfig
> +++ b/configs/apalis_imx6_defconfig
> @@ -23,6 +23,7 @@ CONFIG_DISTRO_DEFAULTS=y
>  CONFIG_FIT=y
>  CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
>  CONFIG_BOOTDELAY=1
> +CONFIG_BOOTCOMMAND="run distro_bootcmd;usb start;setenv stdout serial,vidconsole;setenv stdin serial,usbkbd"
>  # CONFIG_DISPLAY_BOARDINFO is not set
>  CONFIG_DISPLAY_BOARDINFO_LATE=y
>  CONFIG_BOARD_EARLY_INIT_F=y
> diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
> index 47b1cfb1917..bee4e7edd63 100644
> --- a/configs/colibri_imx6_defconfig
> +++ b/configs/colibri_imx6_defconfig
> @@ -22,6 +22,7 @@ CONFIG_DISTRO_DEFAULTS=y
>  CONFIG_FIT=y
>  CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
>  CONFIG_BOOTDELAY=1
> +CONFIG_BOOTCOMMAND="run distro_bootcmd;usb start;setenv stdout serial,vidconsole;setenv stdin serial,usbkbd"
>  # CONFIG_DISPLAY_BOARDINFO is not set
>  CONFIG_DISPLAY_BOARDINFO_LATE=y
>  CONFIG_BOARD_EARLY_INIT_F=y
> diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
> index 12de0105c6c..ade479cb943 100644
> --- a/include/configs/apalis_imx6.h
> +++ b/include/configs/apalis_imx6.h
> @@ -133,10 +133,6 @@
>  #endif
>  #define CONFIG_EXTRA_ENV_SETTINGS \
>         BOOTENV \
> -       "bootcmd=run distro_bootcmd ; " \
> -               "usb start ; " \
> -               "setenv stdout serial,vidconsole; " \
> -               "setenv stdin serial,usbkbd\0" \
>         "boot_file=zImage\0" \
>         "console=ttymxc0\0" \
>         "defargs=enable_wait_mode=off vmalloc=400M\0" \
> diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
> index 804a144a03e..f91d6b49ea8 100644
> --- a/include/configs/colibri_imx6.h
> +++ b/include/configs/colibri_imx6.h
> @@ -115,10 +115,6 @@
>  #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
>  #define CONFIG_EXTRA_ENV_SETTINGS \
>         BOOTENV \
> -       "bootcmd=run distro_bootcmd; " \
> -               "usb start ; " \
> -               "setenv stdout serial,vidconsole; " \
> -               "setenv stdin serial,usbkbd\0" \
>         "boot_file=zImage\0" \
>         "console=ttymxc0\0" \
>         "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
> --
> 2.31.1
>

Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>

-- 
Best regards - Freundliche Grüsse - Meilleures salutations

Igor Opaniuk
Embedded Software Engineer
T:  +380 938364067
E: igor.opaniuk@foundries.io
W: www.foundries.io

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig
  2021-09-12 19:39 [PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig Oleksandr Suvorov
  2021-09-15  2:15 ` Peng Fan (OSS)
  2021-09-15 16:06 ` Igor Opaniuk
@ 2021-09-15 20:11 ` Marcel Ziswiler
  2021-09-16  9:09   ` Oleksandr Suvorov
  2 siblings, 1 reply; 5+ messages in thread
From: Marcel Ziswiler @ 2021-09-15 20:11 UTC (permalink / raw)
  To: u-boot, oleksandr.suvorov
  Cc: Philippe Schenker, hs, patrick.delaunay, sjg, Max Krummenacher,
	igor.opaniuk

Hi Oleksandr

Thanks, just one minor nit-pick below.

On Sun, 2021-09-12 at 22:39 +0300, Oleksandr Suvorov wrote:
> Move setting the default boot command to the
> apalis/colibri_imx6_defconfig. It allows replacing the command
> without code modification.
> 
> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
> ---
> 
>  configs/apalis_imx6_defconfig  | 1 +
>  configs/colibri_imx6_defconfig | 1 +
>  include/configs/apalis_imx6.h  | 4 ----
>  include/configs/colibri_imx6.h | 4 ----
>  4 files changed, 2 insertions(+), 8 deletions(-)
> 
> diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
> index a0e85ba23a4..a2e0f8e3936 100644
> --- a/configs/apalis_imx6_defconfig
> +++ b/configs/apalis_imx6_defconfig
> @@ -23,6 +23,7 @@ CONFIG_DISTRO_DEFAULTS=y
>  CONFIG_FIT=y
>  CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
>  CONFIG_BOOTDELAY=1
> +CONFIG_BOOTCOMMAND="run distro_bootcmd;usb start;setenv stdout serial,vidconsole;setenv stdin serial,usbkbd"

I believe, usually we had a space after those semicolons, not?

>  # CONFIG_DISPLAY_BOARDINFO is not set
>  CONFIG_DISPLAY_BOARDINFO_LATE=y
>  CONFIG_BOARD_EARLY_INIT_F=y
> diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
> index 47b1cfb1917..bee4e7edd63 100644
> --- a/configs/colibri_imx6_defconfig
> +++ b/configs/colibri_imx6_defconfig
> @@ -22,6 +22,7 @@ CONFIG_DISTRO_DEFAULTS=y
>  CONFIG_FIT=y
>  CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
>  CONFIG_BOOTDELAY=1
> +CONFIG_BOOTCOMMAND="run distro_bootcmd;usb start;setenv stdout serial,vidconsole;setenv stdin serial,usbkbd"

Ditto.

>  # CONFIG_DISPLAY_BOARDINFO is not set
>  CONFIG_DISPLAY_BOARDINFO_LATE=y
>  CONFIG_BOARD_EARLY_INIT_F=y
> diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
> index 12de0105c6c..ade479cb943 100644
> --- a/include/configs/apalis_imx6.h
> +++ b/include/configs/apalis_imx6.h
> @@ -133,10 +133,6 @@
>  #endif
>  #define CONFIG_EXTRA_ENV_SETTINGS \
>         BOOTENV \
> -       "bootcmd=run distro_bootcmd ; " \
> -               "usb start ; " \
> -               "setenv stdout serial,vidconsole; " \
> -               "setenv stdin serial,usbkbd\0" \

At least here we definitely did have them (;-p).

>         "boot_file=zImage\0" \
>         "console=ttymxc0\0" \
>         "defargs=enable_wait_mode=off vmalloc=400M\0" \
> diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
> index 804a144a03e..f91d6b49ea8 100644
> --- a/include/configs/colibri_imx6.h
> +++ b/include/configs/colibri_imx6.h
> @@ -115,10 +115,6 @@
>  #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
>  #define CONFIG_EXTRA_ENV_SETTINGS \
>         BOOTENV \
> -       "bootcmd=run distro_bootcmd; " \
> -               "usb start ; " \
> -               "setenv stdout serial,vidconsole; " \
> -               "setenv stdin serial,usbkbd\0" \
>         "boot_file=zImage\0" \
>         "console=ttymxc0\0" \
>         "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \

Cheers

Marcel

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig
  2021-09-15 20:11 ` Marcel Ziswiler
@ 2021-09-16  9:09   ` Oleksandr Suvorov
  0 siblings, 0 replies; 5+ messages in thread
From: Oleksandr Suvorov @ 2021-09-16  9:09 UTC (permalink / raw)
  To: Marcel Ziswiler
  Cc: u-boot, oleksandr.suvorov, Philippe Schenker, hs,
	patrick.delaunay, sjg, Max Krummenacher, igor.opaniuk

Hi Marcel,

On Wed, Sep 15, 2021 at 11:12 PM Marcel Ziswiler
<marcel.ziswiler@toradex.com> wrote:
>
> Hi Oleksandr
>
> Thanks, just one minor nit-pick below.
>
> On Sun, 2021-09-12 at 22:39 +0300, Oleksandr Suvorov wrote:
> > Move setting the default boot command to the
> > apalis/colibri_imx6_defconfig. It allows replacing the command
> > without code modification.
> >
> > Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
> > ---
> >
> >  configs/apalis_imx6_defconfig  | 1 +
> >  configs/colibri_imx6_defconfig | 1 +
> >  include/configs/apalis_imx6.h  | 4 ----
> >  include/configs/colibri_imx6.h | 4 ----
> >  4 files changed, 2 insertions(+), 8 deletions(-)
> >
> > diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
> > index a0e85ba23a4..a2e0f8e3936 100644
> > --- a/configs/apalis_imx6_defconfig
> > +++ b/configs/apalis_imx6_defconfig
> > @@ -23,6 +23,7 @@ CONFIG_DISTRO_DEFAULTS=y
> >  CONFIG_FIT=y
> >  CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
> >  CONFIG_BOOTDELAY=1
> > +CONFIG_BOOTCOMMAND="run distro_bootcmd;usb start;setenv stdout serial,vidconsole;setenv stdin serial,usbkbd"
>
> I believe, usually we had a space after those semicolons, not?

Thanks! Fixed.

>
> >  # CONFIG_DISPLAY_BOARDINFO is not set
> >  CONFIG_DISPLAY_BOARDINFO_LATE=y
> >  CONFIG_BOARD_EARLY_INIT_F=y
> > diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
> > index 47b1cfb1917..bee4e7edd63 100644
> > --- a/configs/colibri_imx6_defconfig
> > +++ b/configs/colibri_imx6_defconfig
> > @@ -22,6 +22,7 @@ CONFIG_DISTRO_DEFAULTS=y
> >  CONFIG_FIT=y
> >  CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
> >  CONFIG_BOOTDELAY=1
> > +CONFIG_BOOTCOMMAND="run distro_bootcmd;usb start;setenv stdout serial,vidconsole;setenv stdin serial,usbkbd"
>
> Ditto.
>
> >  # CONFIG_DISPLAY_BOARDINFO is not set
> >  CONFIG_DISPLAY_BOARDINFO_LATE=y
> >  CONFIG_BOARD_EARLY_INIT_F=y
> > diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
> > index 12de0105c6c..ade479cb943 100644
> > --- a/include/configs/apalis_imx6.h
> > +++ b/include/configs/apalis_imx6.h
> > @@ -133,10 +133,6 @@
> >  #endif
> >  #define CONFIG_EXTRA_ENV_SETTINGS \
> >         BOOTENV \
> > -       "bootcmd=run distro_bootcmd ; " \
> > -               "usb start ; " \
> > -               "setenv stdout serial,vidconsole; " \
> > -               "setenv stdin serial,usbkbd\0" \
>
> At least here we definitely did have them (;-p).
>
> >         "boot_file=zImage\0" \
> >         "console=ttymxc0\0" \
> >         "defargs=enable_wait_mode=off vmalloc=400M\0" \
> > diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
> > index 804a144a03e..f91d6b49ea8 100644
> > --- a/include/configs/colibri_imx6.h
> > +++ b/include/configs/colibri_imx6.h
> > @@ -115,10 +115,6 @@
> >  #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
> >  #define CONFIG_EXTRA_ENV_SETTINGS \
> >         BOOTENV \
> > -       "bootcmd=run distro_bootcmd; " \
> > -               "usb start ; " \
> > -               "setenv stdout serial,vidconsole; " \
> > -               "setenv stdin serial,usbkbd\0" \
> >         "boot_file=zImage\0" \
> >         "console=ttymxc0\0" \
> >         "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
>
> Cheers
>
> Marcel



-- 
Best regards
Oleksandr

Oleksandr Suvorov
cryosay@gmail.com

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2021-09-16  9:09 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-12 19:39 [PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig Oleksandr Suvorov
2021-09-15  2:15 ` Peng Fan (OSS)
2021-09-15 16:06 ` Igor Opaniuk
2021-09-15 20:11 ` Marcel Ziswiler
2021-09-16  9:09   ` Oleksandr Suvorov

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.