From: christophe.varoqui@free.fr Cc: dm-devel@redhat.com, linux-raid@vger.kernel.org, linux-hotplug-devel@lists.sourceforge.net, linux-scsi@vger.kernel.org Subject: [ANNOUNCE] multipath-tools-0.3.0 Date: Wed, 6 Oct 2004 11:22:53 +0200 [thread overview] Message-ID: <1097054573.4163b96d1262c@imp5-q.free.fr> (raw) In-Reply-To: <1096071849.4466.31.camel@zezette> Hello, here goes multipath-tools-0.3.0 Faster release cycle. Big things for some people out there. Upgrade will need you to manualy remove your /etc/udev/rules.d/multipath.rules and kill your devmap_name rule in udev.rules (we use a separate rules.d file now) In short : * easy multipath-aware initrds on Debian SID * fully fonctionnal with direct-attached SCSI disks (single-path) Full ChangeLog for the release : * first cut at making scripts to create multipath-aware initrds those scripts are tested on Debian SID, and must be copied into /etc/mkinitrd/scripts. it works here. * [multipath] verify presence of the /sys/block/... node before reading sysfs attributes. Avoids libsysfs and scsi_id stderr garbage * [multipath] move down the stderr close (Ake Sandgren at umu.se) * [multipath] don't care about 0-sized mp (Ake Sandgren at umu.se) * [multipath] bump mp size field to ulong (Ake Sandgren at umu.se) * [multipath] replace quiet/verbose flags by a verbosity one. introduce a new verbosity level : 1 == print only devmap names thus we can feed kpartx with that output * [multipath] update man page to reflect the hotplug.d -> dev.d transition and replace the obsolete group_by_tur policy by the forgotten group_by_prio * [multipath] provide a /etc/udev/rules.d/multipath.rules for multipath devices naming. Cleaner than the previously suggested rule addition in the main udev.rules * [multipath] move out of hotplug.d to dev.d : kill synchronisation problems between device node creation and multipath execution. Incidentally the unfriendly $DEVPATH param become a friendly $DEVNAME (simply /dev/sdb) * [multipath] rework the iopolicies name-to-id & id-to-name translations. kills the last compilation warning here too * [kpartx] kill last compilation warnings * bump klibc to 0.181 * add the debian/ packaging dir (make deb) * prototype __clone & __clone2 (kills compilation warning) As usual, doc and download at : http://christophe.varoqui.free.fr/ regards, -- christophe varoqui <christophe.varoqui@free.fr>
WARNING: multiple messages have this Message-ID (diff)
From: christophe.varoqui@free.fr To: linux-hotplug@vger.kernel.org Cc: dm-devel@redhat.com, linux-raid@vger.kernel.org, linux-hotplug-devel@lists.sourceforge.net, linux-scsi@vger.kernel.org Subject: [ANNOUNCE] multipath-tools-0.3.0 Date: Wed, 06 Oct 2004 09:22:53 +0000 [thread overview] Message-ID: <1097054573.4163b96d1262c@imp5-q.free.fr> (raw) In-Reply-To: <1096071849.4466.31.camel@zezette> Hello, here goes multipath-tools-0.3.0 Faster release cycle. Big things for some people out there. Upgrade will need you to manualy remove your /etc/udev/rules.d/multipath.rules and kill your devmap_name rule in udev.rules (we use a separate rules.d file now) In short : * easy multipath-aware initrds on Debian SID * fully fonctionnal with direct-attached SCSI disks (single-path) Full ChangeLog for the release : * first cut at making scripts to create multipath-aware initrds those scripts are tested on Debian SID, and must be copied into /etc/mkinitrd/scripts. it works here. * [multipath] verify presence of the /sys/block/... node before reading sysfs attributes. Avoids libsysfs and scsi_id stderr garbage * [multipath] move down the stderr close (Ake Sandgren at umu.se) * [multipath] don't care about 0-sized mp (Ake Sandgren at umu.se) * [multipath] bump mp size field to ulong (Ake Sandgren at umu.se) * [multipath] replace quiet/verbose flags by a verbosity one. introduce a new verbosity level : 1 = print only devmap names thus we can feed kpartx with that output * [multipath] update man page to reflect the hotplug.d -> dev.d transition and replace the obsolete group_by_tur policy by the forgotten group_by_prio * [multipath] provide a /etc/udev/rules.d/multipath.rules for multipath devices naming. Cleaner than the previously suggested rule addition in the main udev.rules * [multipath] move out of hotplug.d to dev.d : kill synchronisation problems between device node creation and multipath execution. Incidentally the unfriendly $DEVPATH param become a friendly $DEVNAME (simply /dev/sdb) * [multipath] rework the iopolicies name-to-id & id-to-name translations. kills the last compilation warning here too * [kpartx] kill last compilation warnings * bump klibc to 0.181 * add the debian/ packaging dir (make deb) * prototype __clone & __clone2 (kills compilation warning) As usual, doc and download at : http://christophe.varoqui.free.fr/ regards, -- christophe varoqui <christophe.varoqui@free.fr> ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
next prev parent reply other threads:[~2004-10-06 9:22 UTC|newest] Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top 2004-09-25 0:24 [ANNOUNCE] multipath-tools-0.2.9 christophe varoqui 2004-09-25 0:24 ` christophe varoqui 2004-10-06 9:22 ` christophe.varoqui [this message] 2004-10-06 9:22 ` [ANNOUNCE] multipath-tools-0.3.0 christophe.varoqui 2004-10-06 9:50 ` [dm-devel] " Lars Marowsky-Bree 2004-10-06 9:50 ` Lars Marowsky-Bree 2004-10-06 10:18 ` christophe.varoqui 2004-10-06 10:18 ` christophe.varoqui 2004-10-11 12:00 ` Lars Marowsky-Bree 2004-10-11 12:00 ` Lars Marowsky-Bree 2004-10-11 12:31 ` christophe.varoqui 2004-10-11 12:31 ` christophe.varoqui 2004-10-07 20:01 ` Dave Olien 2004-10-07 20:01 ` Dave Olien 2004-10-08 12:49 ` christophe.varoqui 2004-10-08 12:49 ` christophe.varoqui 2004-10-11 11:50 ` [ANNOUNCE] multipath-tools-0.3.1 christophe.varoqui 2004-10-11 11:50 ` christophe.varoqui 2004-10-12 18:35 ` Dave Olien 2004-10-12 18:35 ` Dave Olien 2004-10-17 14:03 ` multipath-tools-0.3.2 christophe varoqui 2004-10-17 14:03 ` multipath-tools-0.3.2 christophe varoqui 2004-10-20 10:46 ` [ANNOUNCE] multipath-tools-0.3.3 christophe.varoqui 2004-10-20 10:46 ` christophe.varoqui 2004-10-24 22:14 ` [ANNOUNCE] multipath-tools-0.3.4 christophe varoqui 2004-10-24 22:14 ` christophe varoqui 2004-10-25 8:22 ` Arjan van de Ven 2004-10-25 8:22 ` Arjan van de Ven 2004-10-25 9:38 ` christophe.varoqui 2004-10-25 9:38 ` christophe.varoqui 2004-10-25 10:39 ` Douglas Gilbert 2004-10-25 10:39 ` Douglas Gilbert 2004-10-25 21:03 ` [dm-devel] " Lars Marowsky-Bree 2004-10-25 21:03 ` Lars Marowsky-Bree 2004-10-26 17:52 ` Mike Christie 2004-10-26 17:52 ` Mike Christie 2004-10-26 10:06 ` [ANNOUNCE] multipath-tools-0.3.5 christophe.varoqui 2004-10-26 10:06 ` christophe.varoqui 2004-11-01 17:08 ` [ANNOUNCE] multipath-tools-0.3.6 christophe varoqui 2004-11-01 17:08 ` christophe varoqui 2004-11-11 23:10 ` [ANNOUNCE] multipath-tools-0.3.7 christophe varoqui 2004-11-11 23:10 ` christophe varoqui 2004-11-25 14:55 ` [ANNOUNCE] multipath-tools-0.3.8 christophe varoqui 2004-11-25 14:55 ` christophe varoqui 2004-12-05 15:43 ` [ANNOUNCE] multipath-tools-0.3.9 christophe varoqui 2004-12-05 15:43 ` christophe varoqui 2004-12-12 17:20 ` [ANNOUNCE] multipath-tools-0.4.0 christophe varoqui 2004-12-12 17:20 ` christophe varoqui 2004-12-12 18:08 ` ISCSI Guy 2004-12-12 18:55 ` ISCSI Ming Zhang 2004-12-12 21:07 ` ISCSI Guy 2004-12-12 21:12 ` ISCSI Ming Zhang 2004-12-20 16:01 ` [ANNOUNCE] multipath-tools-0.4.1 christophe varoqui 2004-12-20 16:01 ` christophe varoqui 2005-01-23 23:03 ` [ANNOUNCE] multipath-tools-0.4.2 christophe varoqui 2005-01-23 23:03 ` christophe varoqui 2005-03-19 14:27 ` [ANNOUNCE] multipath-tools-0.4.3 christophe varoqui 2005-03-19 14:27 ` christophe varoqui 2005-04-24 22:26 ` [ANNOUNCE] multipath-tools-0.4.4 christophe varoqui 2005-04-24 22:26 ` christophe varoqui 2005-04-25 9:28 ` Lars Marowsky-Bree 2004-12-21 22:02 [dm-devel] [ANNOUNCE] multipath-tools-0.4.1 Caushik, Ramesh 2004-12-21 22:02 ` Caushik, Ramesh 2004-12-21 23:03 ` christophe varoqui 2004-12-22 1:09 ` christophe varoqui 2004-12-21 23:19 ` christophe varoqui 2004-12-22 1:26 ` christophe varoqui 2004-12-22 19:26 Caushik, Ramesh 2004-12-22 19:26 ` Caushik, Ramesh 2004-12-22 19:45 ` christophe varoqui 2004-12-22 21:52 ` christophe varoqui 2004-12-22 21:05 James.Smart 2004-12-22 21:05 ` James.Smart 2004-12-22 21:23 ` christophe varoqui 2004-12-22 23:30 ` christophe varoqui 2004-12-22 21:54 Caushik, Ramesh 2004-12-22 21:54 ` Caushik, Ramesh 2004-12-23 13:28 ` Christoph Hellwig 2004-12-23 13:28 ` Christoph Hellwig 2004-12-23 12:19 James.Smart 2004-12-23 12:19 ` James.Smart
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1097054573.4163b96d1262c@imp5-q.free.fr \ --to=christophe.varoqui@free.fr \ --cc=dm-devel@redhat.com \ --cc=linux-hotplug-devel@lists.sourceforge.net \ --cc=linux-raid@vger.kernel.org \ --cc=linux-scsi@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.