From: christophe.varoqui@free.fr
To: device-mapper development <dm-devel@redhat.com>,
Lars Marowsky-Bree <lmb@suse.de>
Cc: linux-raid@vger.kernel.org,
linux-hotplug-devel@lists.sourceforge.net,
linux-scsi@vger.kernel.org
Subject: Re: [dm-devel] [ANNOUNCE] multipath-tools-0.3.0
Date: Mon, 11 Oct 2004 14:31:14 +0200 [thread overview]
Message-ID: <1097497874.416a7d124937f@imp1-q.free.fr> (raw)
In-Reply-To: <20041011120049.GQ4021@marowsky-bree.de>
Selon Lars Marowsky-Bree <lmb@suse.de>:
> > * /etc/udev/udev.rules
> >
> > from 0.3.0 and up, we don't touch it anymore
>
> That's very good indeed and actually makes configuration easier! Which
> udev version do you require though?
>
034+, because of scsi_id-0.6 dependancy
if scsi_id is packaged separately in Suse, min version goes down as low as dev.d
introduction (I don't know precisely what the number is).
> > these copy udev, multipath tools and config files to initrd when
> > mkinitrd is launched.
>
> Yes. I'm not yet sure how/if we are going to support booting from
> multipath root fs in SLES9, so this doesn't really affect me for the
> time being.
>
> I first will need to do a gap analysis and figure out where to go today
> ;-)
>
yes,
the hard decision is wether you want to rely on kpartx.
regards,
cvaroqui
WARNING: multiple messages have this Message-ID (diff)
From: christophe.varoqui@free.fr
To: device-mapper development <dm-devel@redhat.com>,
Lars Marowsky-Bree <lmb@suse.de>
Cc: linux-raid@vger.kernel.org,
linux-hotplug-devel@lists.sourceforge.net,
linux-scsi@vger.kernel.org
Subject: Re: [dm-devel] [ANNOUNCE] multipath-tools-0.3.0
Date: Mon, 11 Oct 2004 12:31:14 +0000 [thread overview]
Message-ID: <1097497874.416a7d124937f@imp1-q.free.fr> (raw)
In-Reply-To: <20041011120049.GQ4021@marowsky-bree.de>
Selon Lars Marowsky-Bree <lmb@suse.de>:
> > * /etc/udev/udev.rules
> >
> > from 0.3.0 and up, we don't touch it anymore
>
> That's very good indeed and actually makes configuration easier! Which
> udev version do you require though?
>
034+, because of scsi_id-0.6 dependancy
if scsi_id is packaged separately in Suse, min version goes down as low as dev.d
introduction (I don't know precisely what the number is).
> > these copy udev, multipath tools and config files to initrd when
> > mkinitrd is launched.
>
> Yes. I'm not yet sure how/if we are going to support booting from
> multipath root fs in SLES9, so this doesn't really affect me for the
> time being.
>
> I first will need to do a gap analysis and figure out where to go today
> ;-)
>
yes,
the hard decision is wether you want to rely on kpartx.
regards,
cvaroqui
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
next prev parent reply other threads:[~2004-10-11 12:31 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-25 0:24 [ANNOUNCE] multipath-tools-0.2.9 christophe varoqui
2004-09-25 0:24 ` christophe varoqui
2004-10-06 9:22 ` [ANNOUNCE] multipath-tools-0.3.0 christophe.varoqui
2004-10-06 9:22 ` christophe.varoqui
2004-10-06 9:50 ` [dm-devel] " Lars Marowsky-Bree
2004-10-06 9:50 ` Lars Marowsky-Bree
2004-10-06 10:18 ` christophe.varoqui
2004-10-06 10:18 ` christophe.varoqui
2004-10-11 12:00 ` Lars Marowsky-Bree
2004-10-11 12:00 ` Lars Marowsky-Bree
2004-10-11 12:31 ` christophe.varoqui [this message]
2004-10-11 12:31 ` christophe.varoqui
2004-10-07 20:01 ` Dave Olien
2004-10-07 20:01 ` Dave Olien
2004-10-08 12:49 ` christophe.varoqui
2004-10-08 12:49 ` christophe.varoqui
2004-10-11 11:50 ` [ANNOUNCE] multipath-tools-0.3.1 christophe.varoqui
2004-10-11 11:50 ` christophe.varoqui
2004-10-12 18:35 ` Dave Olien
2004-10-12 18:35 ` Dave Olien
2004-10-17 14:03 ` multipath-tools-0.3.2 christophe varoqui
2004-10-17 14:03 ` multipath-tools-0.3.2 christophe varoqui
2004-10-20 10:46 ` [ANNOUNCE] multipath-tools-0.3.3 christophe.varoqui
2004-10-20 10:46 ` christophe.varoqui
2004-10-24 22:14 ` [ANNOUNCE] multipath-tools-0.3.4 christophe varoqui
2004-10-24 22:14 ` christophe varoqui
2004-10-25 8:22 ` Arjan van de Ven
2004-10-25 8:22 ` Arjan van de Ven
2004-10-25 9:38 ` christophe.varoqui
2004-10-25 9:38 ` christophe.varoqui
2004-10-25 10:39 ` Douglas Gilbert
2004-10-25 10:39 ` Douglas Gilbert
2004-10-25 21:03 ` [dm-devel] " Lars Marowsky-Bree
2004-10-25 21:03 ` Lars Marowsky-Bree
2004-10-26 17:52 ` Mike Christie
2004-10-26 17:52 ` Mike Christie
2004-10-26 10:06 ` [ANNOUNCE] multipath-tools-0.3.5 christophe.varoqui
2004-10-26 10:06 ` christophe.varoqui
2004-11-01 17:08 ` [ANNOUNCE] multipath-tools-0.3.6 christophe varoqui
2004-11-01 17:08 ` christophe varoqui
2004-11-11 23:10 ` [ANNOUNCE] multipath-tools-0.3.7 christophe varoqui
2004-11-11 23:10 ` christophe varoqui
2004-11-25 14:55 ` [ANNOUNCE] multipath-tools-0.3.8 christophe varoqui
2004-11-25 14:55 ` christophe varoqui
2004-12-05 15:43 ` [ANNOUNCE] multipath-tools-0.3.9 christophe varoqui
2004-12-05 15:43 ` christophe varoqui
2004-12-12 17:20 ` [ANNOUNCE] multipath-tools-0.4.0 christophe varoqui
2004-12-12 17:20 ` christophe varoqui
2004-12-12 18:08 ` ISCSI Guy
2004-12-12 18:55 ` ISCSI Ming Zhang
2004-12-12 21:07 ` ISCSI Guy
2004-12-12 21:12 ` ISCSI Ming Zhang
2004-12-20 16:01 ` [ANNOUNCE] multipath-tools-0.4.1 christophe varoqui
2004-12-20 16:01 ` christophe varoqui
2005-01-23 23:03 ` [ANNOUNCE] multipath-tools-0.4.2 christophe varoqui
2005-01-23 23:03 ` christophe varoqui
2005-03-19 14:27 ` [ANNOUNCE] multipath-tools-0.4.3 christophe varoqui
2005-03-19 14:27 ` christophe varoqui
2005-04-24 22:26 ` [ANNOUNCE] multipath-tools-0.4.4 christophe varoqui
2005-04-24 22:26 ` christophe varoqui
2005-04-25 9:28 ` Lars Marowsky-Bree
2004-12-21 22:02 [dm-devel] [ANNOUNCE] multipath-tools-0.4.1 Caushik, Ramesh
2004-12-21 22:02 ` Caushik, Ramesh
2004-12-21 23:03 ` christophe varoqui
2004-12-22 1:09 ` christophe varoqui
2004-12-21 23:19 ` christophe varoqui
2004-12-22 1:26 ` christophe varoqui
2004-12-22 19:26 Caushik, Ramesh
2004-12-22 19:26 ` Caushik, Ramesh
2004-12-22 19:45 ` christophe varoqui
2004-12-22 21:52 ` christophe varoqui
2004-12-22 21:05 James.Smart
2004-12-22 21:05 ` James.Smart
2004-12-22 21:23 ` christophe varoqui
2004-12-22 23:30 ` christophe varoqui
2004-12-22 21:54 Caushik, Ramesh
2004-12-22 21:54 ` Caushik, Ramesh
2004-12-23 13:28 ` Christoph Hellwig
2004-12-23 13:28 ` Christoph Hellwig
2004-12-23 12:19 James.Smart
2004-12-23 12:19 ` James.Smart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1097497874.416a7d124937f@imp1-q.free.fr \
--to=christophe.varoqui@free.fr \
--cc=dm-devel@redhat.com \
--cc=linux-hotplug-devel@lists.sourceforge.net \
--cc=linux-raid@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=lmb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.