* [PATCH 1/3] extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_* @ 2016-12-21 6:10 ` Baolin Wang 0 siblings, 0 replies; 24+ messages in thread From: Baolin Wang @ 2016-12-21 6:10 UTC (permalink / raw) To: myungjoo.ham, cw00.choi, wens, kishon, heiko Cc: linux-kernel, linux-arm-kernel, linux-rockchip, linaro-kernel, baolin.wang, broonie, neilb Current there is both "EXTCON_USB" and "EXTCON_CHG_USB_SDP" which both seem to suggest a standard downstream port. But there is no documentation describing how these relate. Thus add documentation to describe EXTCON_CHG_USB_SDP should always appear together with EXTCON_USB, and EXTCON_CHG_USB_ACA would normally appear with EXTCON_USB_HOST. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> --- include/linux/extcon.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/include/linux/extcon.h b/include/linux/extcon.h index b871c0c..6498b05 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -46,7 +46,14 @@ #define EXTCON_USB 1 #define EXTCON_USB_HOST 2 -/* Charging external connector */ +/* + * Charging external connector + * + * When one SDP charger connector was reported, we should also report + * the USB connector, which means EXTCON_CHG_USB_SDP should always + * appear together with EXTCON_USB. The same as ACA charger connector, + * EXTCON_CHG_USB_ACA should always appear with EXTCON_USB_HOST. + */ #define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */ #define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */ #define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */ -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 1/3] extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_* @ 2016-12-21 6:10 ` Baolin Wang 0 siblings, 0 replies; 24+ messages in thread From: Baolin Wang @ 2016-12-21 6:10 UTC (permalink / raw) To: linux-arm-kernel Current there is both "EXTCON_USB" and "EXTCON_CHG_USB_SDP" which both seem to suggest a standard downstream port. But there is no documentation describing how these relate. Thus add documentation to describe EXTCON_CHG_USB_SDP should always appear together with EXTCON_USB, and EXTCON_CHG_USB_ACA would normally appear with EXTCON_USB_HOST. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> --- include/linux/extcon.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/include/linux/extcon.h b/include/linux/extcon.h index b871c0c..6498b05 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -46,7 +46,14 @@ #define EXTCON_USB 1 #define EXTCON_USB_HOST 2 -/* Charging external connector */ +/* + * Charging external connector + * + * When one SDP charger connector was reported, we should also report + * the USB connector, which means EXTCON_CHG_USB_SDP should always + * appear together with EXTCON_USB. The same as ACA charger connector, + * EXTCON_CHG_USB_ACA should always appear with EXTCON_USB_HOST. + */ #define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */ #define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */ #define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */ -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 2/3] extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set 2016-12-21 6:10 ` Baolin Wang @ 2016-12-21 6:10 ` Baolin Wang -1 siblings, 0 replies; 24+ messages in thread From: Baolin Wang @ 2016-12-21 6:10 UTC (permalink / raw) To: myungjoo.ham, cw00.choi, wens, kishon, heiko Cc: linux-kernel, linux-arm-kernel, linux-rockchip, linaro-kernel, baolin.wang, broonie, neilb According to the documentation, we should set the EXTCON_USB when one SDP charger connector was reported. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> --- drivers/extcon/extcon-axp288.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index 42f41e8..4490726 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -102,6 +102,7 @@ enum axp288_extcon_irq { }; static const unsigned int axp288_extcon_cables[] = { + EXTCON_USB, EXTCON_CHG_USB_SDP, EXTCON_CHG_USB_CDP, EXTCON_CHG_USB_DCP, @@ -225,8 +226,12 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) vbus_attach ? USB_EVENT_VBUS : USB_EVENT_NONE, NULL); } - if (notify_charger) + if (notify_charger) { extcon_set_state_sync(info->edev, cable, vbus_attach); + if (cable == EXTCON_CHG_USB_SDP) + extcon_set_state_sync(info->edev, EXTCON_USB, + vbus_attach); + } /* Clear the flags on disconnect event */ if (!vbus_attach) -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 2/3] extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set @ 2016-12-21 6:10 ` Baolin Wang 0 siblings, 0 replies; 24+ messages in thread From: Baolin Wang @ 2016-12-21 6:10 UTC (permalink / raw) To: linux-arm-kernel According to the documentation, we should set the EXTCON_USB when one SDP charger connector was reported. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> --- drivers/extcon/extcon-axp288.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index 42f41e8..4490726 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -102,6 +102,7 @@ enum axp288_extcon_irq { }; static const unsigned int axp288_extcon_cables[] = { + EXTCON_USB, EXTCON_CHG_USB_SDP, EXTCON_CHG_USB_CDP, EXTCON_CHG_USB_DCP, @@ -225,8 +226,12 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) vbus_attach ? USB_EVENT_VBUS : USB_EVENT_NONE, NULL); } - if (notify_charger) + if (notify_charger) { extcon_set_state_sync(info->edev, cable, vbus_attach); + if (cable == EXTCON_CHG_USB_SDP) + extcon_set_state_sync(info->edev, EXTCON_USB, + vbus_attach); + } /* Clear the flags on disconnect event */ if (!vbus_attach) -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH 2/3] extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set 2016-12-21 6:10 ` Baolin Wang @ 2016-12-21 7:22 ` Chanwoo Choi -1 siblings, 0 replies; 24+ messages in thread From: Chanwoo Choi @ 2016-12-21 7:22 UTC (permalink / raw) To: Baolin Wang, myungjoo.ham, wens, kishon, heiko Cc: linux-kernel, linux-arm-kernel, linux-rockchip, linaro-kernel, broonie, neilb Hi, On 2016년 12월 21일 15:10, Baolin Wang wrote: > According to the documentation, we should set the EXTCON_USB when > one SDP charger connector was reported. > > Signed-off-by: Baolin Wang <baolin.wang@linaro.org> > --- > drivers/extcon/extcon-axp288.c | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c > index 42f41e8..4490726 100644 > --- a/drivers/extcon/extcon-axp288.c > +++ b/drivers/extcon/extcon-axp288.c > @@ -102,6 +102,7 @@ enum axp288_extcon_irq { > }; > > static const unsigned int axp288_extcon_cables[] = { > + EXTCON_USB, > EXTCON_CHG_USB_SDP, > EXTCON_CHG_USB_CDP, > EXTCON_CHG_USB_DCP, > @@ -225,8 +226,12 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) > vbus_attach ? USB_EVENT_VBUS : USB_EVENT_NONE, NULL); > } > > - if (notify_charger) > + if (notify_charger) { > extcon_set_state_sync(info->edev, cable, vbus_attach); > + if (cable == EXTCON_CHG_USB_SDP) > + extcon_set_state_sync(info->edev, EXTCON_USB, > + vbus_attach); > + } > > /* Clear the flags on disconnect event */ > if (!vbus_attach) > The extcon-axp288.c driver has some patches on extcon-next[1] branch. [1] https://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/log/?h=extcon-next I rework your patch on extcon-next branch as following: If you ok, I'll merge it for v4.11. commit 1a96f92bdfab86d0b634e56092f543cad348fd0b Refs: extcon-next, extcon-next-for-4.10-15-g1a96f92bdfab Author: Baolin Wang <baolin.wang@linaro.org> AuthorDate: Wed Dec 21 15:51:26 2016 +0900 Commit: Chanwoo Choi <cw00.choi@samsung.com> CommitDate: Wed Dec 21 15:52:00 2016 +0900 extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set According to the documentation, we should set the EXTCON_USB when one SDP charger connector was reported. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> --- drivers/extcon/extcon-axp288.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index 3e145e2a4860..f4fd03e58e37 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -96,6 +96,7 @@ enum axp288_extcon_irq { EXTCON_CHG_USB_SDP, EXTCON_CHG_USB_CDP, EXTCON_CHG_USB_DCP, + EXTCON_USB, EXTCON_NONE, }; @@ -206,8 +207,15 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) : EXTCON_GPIO_MUX_SEL_PMIC); extcon_set_state_sync(info->edev, info->previous_cable, false); + if (info->previous_cable == EXTCON_CHG_USB_SDP) + extcon_set_state_sync(info->edev, EXTCON_USB, false); + if (vbus_attach) { extcon_set_state_sync(info->edev, cable, vbus_attach); + if (cable == EXTCON_CHG_USB_SDP) + extcon_set_state_sync(info->edev, EXTCON_USB, + vbus_attach); + info->previous_cable = cable; } -- Regards, Chanwoo Choi ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 2/3] extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set @ 2016-12-21 7:22 ` Chanwoo Choi 0 siblings, 0 replies; 24+ messages in thread From: Chanwoo Choi @ 2016-12-21 7:22 UTC (permalink / raw) To: linux-arm-kernel Hi, On 2016? 12? 21? 15:10, Baolin Wang wrote: > According to the documentation, we should set the EXTCON_USB when > one SDP charger connector was reported. > > Signed-off-by: Baolin Wang <baolin.wang@linaro.org> > --- > drivers/extcon/extcon-axp288.c | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c > index 42f41e8..4490726 100644 > --- a/drivers/extcon/extcon-axp288.c > +++ b/drivers/extcon/extcon-axp288.c > @@ -102,6 +102,7 @@ enum axp288_extcon_irq { > }; > > static const unsigned int axp288_extcon_cables[] = { > + EXTCON_USB, > EXTCON_CHG_USB_SDP, > EXTCON_CHG_USB_CDP, > EXTCON_CHG_USB_DCP, > @@ -225,8 +226,12 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) > vbus_attach ? USB_EVENT_VBUS : USB_EVENT_NONE, NULL); > } > > - if (notify_charger) > + if (notify_charger) { > extcon_set_state_sync(info->edev, cable, vbus_attach); > + if (cable == EXTCON_CHG_USB_SDP) > + extcon_set_state_sync(info->edev, EXTCON_USB, > + vbus_attach); > + } > > /* Clear the flags on disconnect event */ > if (!vbus_attach) > The extcon-axp288.c driver has some patches on extcon-next[1] branch. [1] https://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/log/?h=extcon-next I rework your patch on extcon-next branch as following: If you ok, I'll merge it for v4.11. commit 1a96f92bdfab86d0b634e56092f543cad348fd0b Refs: extcon-next, extcon-next-for-4.10-15-g1a96f92bdfab Author: Baolin Wang <baolin.wang@linaro.org> AuthorDate: Wed Dec 21 15:51:26 2016 +0900 Commit: Chanwoo Choi <cw00.choi@samsung.com> CommitDate: Wed Dec 21 15:52:00 2016 +0900 extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set According to the documentation, we should set the EXTCON_USB when one SDP charger connector was reported. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> --- drivers/extcon/extcon-axp288.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index 3e145e2a4860..f4fd03e58e37 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -96,6 +96,7 @@ enum axp288_extcon_irq { EXTCON_CHG_USB_SDP, EXTCON_CHG_USB_CDP, EXTCON_CHG_USB_DCP, + EXTCON_USB, EXTCON_NONE, }; @@ -206,8 +207,15 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) : EXTCON_GPIO_MUX_SEL_PMIC); extcon_set_state_sync(info->edev, info->previous_cable, false); + if (info->previous_cable == EXTCON_CHG_USB_SDP) + extcon_set_state_sync(info->edev, EXTCON_USB, false); + if (vbus_attach) { extcon_set_state_sync(info->edev, cable, vbus_attach); + if (cable == EXTCON_CHG_USB_SDP) + extcon_set_state_sync(info->edev, EXTCON_USB, + vbus_attach); + info->previous_cable = cable; } -- Regards, Chanwoo Choi ^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH 2/3] extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set 2016-12-21 7:22 ` Chanwoo Choi @ 2016-12-21 7:55 ` Baolin Wang -1 siblings, 0 replies; 24+ messages in thread From: Baolin Wang @ 2016-12-21 7:55 UTC (permalink / raw) To: Chanwoo Choi Cc: myungjoo.ham, Chen-Yu Tsai, Kishon, Heiko Stübner, LKML, linux-arm-kernel, linux-rockchip, Linaro Kernel Mailman List, Mark Brown, NeilBrown Hi, On 21 December 2016 at 15:22, Chanwoo Choi <cw00.choi@samsung.com> wrote: > Hi, > > On 2016년 12월 21일 15:10, Baolin Wang wrote: >> According to the documentation, we should set the EXTCON_USB when >> one SDP charger connector was reported. >> >> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> >> --- >> drivers/extcon/extcon-axp288.c | 7 ++++++- >> 1 file changed, 6 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c >> index 42f41e8..4490726 100644 >> --- a/drivers/extcon/extcon-axp288.c >> +++ b/drivers/extcon/extcon-axp288.c >> @@ -102,6 +102,7 @@ enum axp288_extcon_irq { >> }; >> >> static const unsigned int axp288_extcon_cables[] = { >> + EXTCON_USB, >> EXTCON_CHG_USB_SDP, >> EXTCON_CHG_USB_CDP, >> EXTCON_CHG_USB_DCP, >> @@ -225,8 +226,12 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) >> vbus_attach ? USB_EVENT_VBUS : USB_EVENT_NONE, NULL); >> } >> >> - if (notify_charger) >> + if (notify_charger) { >> extcon_set_state_sync(info->edev, cable, vbus_attach); >> + if (cable == EXTCON_CHG_USB_SDP) >> + extcon_set_state_sync(info->edev, EXTCON_USB, >> + vbus_attach); >> + } >> >> /* Clear the flags on disconnect event */ >> if (!vbus_attach) >> > > The extcon-axp288.c driver has some patches on extcon-next[1] branch. > [1] https://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/log/?h=extcon-next > > I rework your patch on extcon-next branch as following: > If you ok, I'll merge it for v4.11. It is okay for me. Thanks. > > commit 1a96f92bdfab86d0b634e56092f543cad348fd0b > Refs: extcon-next, extcon-next-for-4.10-15-g1a96f92bdfab > Author: Baolin Wang <baolin.wang@linaro.org> > AuthorDate: Wed Dec 21 15:51:26 2016 +0900 > Commit: Chanwoo Choi <cw00.choi@samsung.com> > CommitDate: Wed Dec 21 15:52:00 2016 +0900 > > extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set > > According to the documentation, we should set the EXTCON_USB when > one SDP charger connector was reported. > > Signed-off-by: Baolin Wang <baolin.wang@linaro.org> > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > --- > drivers/extcon/extcon-axp288.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c > index 3e145e2a4860..f4fd03e58e37 100644 > --- a/drivers/extcon/extcon-axp288.c > +++ b/drivers/extcon/extcon-axp288.c > @@ -96,6 +96,7 @@ enum axp288_extcon_irq { > EXTCON_CHG_USB_SDP, > EXTCON_CHG_USB_CDP, > EXTCON_CHG_USB_DCP, > + EXTCON_USB, > EXTCON_NONE, > }; > > @@ -206,8 +207,15 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) > : EXTCON_GPIO_MUX_SEL_PMIC); > > extcon_set_state_sync(info->edev, info->previous_cable, false); > + if (info->previous_cable == EXTCON_CHG_USB_SDP) > + extcon_set_state_sync(info->edev, EXTCON_USB, false); > + > if (vbus_attach) { > extcon_set_state_sync(info->edev, cable, vbus_attach); > + if (cable == EXTCON_CHG_USB_SDP) > + extcon_set_state_sync(info->edev, EXTCON_USB, > + vbus_attach); > + > info->previous_cable = cable; > } > > -- > Regards, > Chanwoo Choi -- Baolin.wang Best Regards ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 2/3] extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set @ 2016-12-21 7:55 ` Baolin Wang 0 siblings, 0 replies; 24+ messages in thread From: Baolin Wang @ 2016-12-21 7:55 UTC (permalink / raw) To: linux-arm-kernel Hi, On 21 December 2016 at 15:22, Chanwoo Choi <cw00.choi@samsung.com> wrote: > Hi, > > On 2016? 12? 21? 15:10, Baolin Wang wrote: >> According to the documentation, we should set the EXTCON_USB when >> one SDP charger connector was reported. >> >> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> >> --- >> drivers/extcon/extcon-axp288.c | 7 ++++++- >> 1 file changed, 6 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c >> index 42f41e8..4490726 100644 >> --- a/drivers/extcon/extcon-axp288.c >> +++ b/drivers/extcon/extcon-axp288.c >> @@ -102,6 +102,7 @@ enum axp288_extcon_irq { >> }; >> >> static const unsigned int axp288_extcon_cables[] = { >> + EXTCON_USB, >> EXTCON_CHG_USB_SDP, >> EXTCON_CHG_USB_CDP, >> EXTCON_CHG_USB_DCP, >> @@ -225,8 +226,12 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) >> vbus_attach ? USB_EVENT_VBUS : USB_EVENT_NONE, NULL); >> } >> >> - if (notify_charger) >> + if (notify_charger) { >> extcon_set_state_sync(info->edev, cable, vbus_attach); >> + if (cable == EXTCON_CHG_USB_SDP) >> + extcon_set_state_sync(info->edev, EXTCON_USB, >> + vbus_attach); >> + } >> >> /* Clear the flags on disconnect event */ >> if (!vbus_attach) >> > > The extcon-axp288.c driver has some patches on extcon-next[1] branch. > [1] https://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/log/?h=extcon-next > > I rework your patch on extcon-next branch as following: > If you ok, I'll merge it for v4.11. It is okay for me. Thanks. > > commit 1a96f92bdfab86d0b634e56092f543cad348fd0b > Refs: extcon-next, extcon-next-for-4.10-15-g1a96f92bdfab > Author: Baolin Wang <baolin.wang@linaro.org> > AuthorDate: Wed Dec 21 15:51:26 2016 +0900 > Commit: Chanwoo Choi <cw00.choi@samsung.com> > CommitDate: Wed Dec 21 15:52:00 2016 +0900 > > extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set > > According to the documentation, we should set the EXTCON_USB when > one SDP charger connector was reported. > > Signed-off-by: Baolin Wang <baolin.wang@linaro.org> > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > --- > drivers/extcon/extcon-axp288.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c > index 3e145e2a4860..f4fd03e58e37 100644 > --- a/drivers/extcon/extcon-axp288.c > +++ b/drivers/extcon/extcon-axp288.c > @@ -96,6 +96,7 @@ enum axp288_extcon_irq { > EXTCON_CHG_USB_SDP, > EXTCON_CHG_USB_CDP, > EXTCON_CHG_USB_DCP, > + EXTCON_USB, > EXTCON_NONE, > }; > > @@ -206,8 +207,15 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) > : EXTCON_GPIO_MUX_SEL_PMIC); > > extcon_set_state_sync(info->edev, info->previous_cable, false); > + if (info->previous_cable == EXTCON_CHG_USB_SDP) > + extcon_set_state_sync(info->edev, EXTCON_USB, false); > + > if (vbus_attach) { > extcon_set_state_sync(info->edev, cable, vbus_attach); > + if (cable == EXTCON_CHG_USB_SDP) > + extcon_set_state_sync(info->edev, EXTCON_USB, > + vbus_attach); > + > info->previous_cable = cable; > } > > -- > Regards, > Chanwoo Choi -- Baolin.wang Best Regards ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 2/3] extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set 2016-12-21 7:55 ` Baolin Wang @ 2016-12-21 7:59 ` Chanwoo Choi -1 siblings, 0 replies; 24+ messages in thread From: Chanwoo Choi @ 2016-12-21 7:59 UTC (permalink / raw) To: Baolin Wang Cc: myungjoo.ham, Chen-Yu Tsai, Kishon, Heiko Stübner, LKML, linux-arm-kernel, linux-rockchip, Linaro Kernel Mailman List, Mark Brown, NeilBrown Hi, On 2016년 12월 21일 16:55, Baolin Wang wrote: > Hi, > > On 21 December 2016 at 15:22, Chanwoo Choi <cw00.choi@samsung.com> wrote: >> Hi, >> >> On 2016년 12월 21일 15:10, Baolin Wang wrote: >>> According to the documentation, we should set the EXTCON_USB when >>> one SDP charger connector was reported. >>> >>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> >>> --- >>> drivers/extcon/extcon-axp288.c | 7 ++++++- >>> 1 file changed, 6 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c >>> index 42f41e8..4490726 100644 >>> --- a/drivers/extcon/extcon-axp288.c >>> +++ b/drivers/extcon/extcon-axp288.c >>> @@ -102,6 +102,7 @@ enum axp288_extcon_irq { >>> }; >>> >>> static const unsigned int axp288_extcon_cables[] = { >>> + EXTCON_USB, >>> EXTCON_CHG_USB_SDP, >>> EXTCON_CHG_USB_CDP, >>> EXTCON_CHG_USB_DCP, >>> @@ -225,8 +226,12 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) >>> vbus_attach ? USB_EVENT_VBUS : USB_EVENT_NONE, NULL); >>> } >>> >>> - if (notify_charger) >>> + if (notify_charger) { >>> extcon_set_state_sync(info->edev, cable, vbus_attach); >>> + if (cable == EXTCON_CHG_USB_SDP) >>> + extcon_set_state_sync(info->edev, EXTCON_USB, >>> + vbus_attach); >>> + } >>> >>> /* Clear the flags on disconnect event */ >>> if (!vbus_attach) >>> >> >> The extcon-axp288.c driver has some patches on extcon-next[1] branch. >> [1] https://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/log/?h=extcon-next >> >> I rework your patch on extcon-next branch as following: >> If you ok, I'll merge it for v4.11. > > It is okay for me. Thanks. Applied it. Thanks. [snip] -- Regards, Chanwoo Choi ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 2/3] extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set @ 2016-12-21 7:59 ` Chanwoo Choi 0 siblings, 0 replies; 24+ messages in thread From: Chanwoo Choi @ 2016-12-21 7:59 UTC (permalink / raw) To: linux-arm-kernel Hi, On 2016? 12? 21? 16:55, Baolin Wang wrote: > Hi, > > On 21 December 2016 at 15:22, Chanwoo Choi <cw00.choi@samsung.com> wrote: >> Hi, >> >> On 2016? 12? 21? 15:10, Baolin Wang wrote: >>> According to the documentation, we should set the EXTCON_USB when >>> one SDP charger connector was reported. >>> >>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> >>> --- >>> drivers/extcon/extcon-axp288.c | 7 ++++++- >>> 1 file changed, 6 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c >>> index 42f41e8..4490726 100644 >>> --- a/drivers/extcon/extcon-axp288.c >>> +++ b/drivers/extcon/extcon-axp288.c >>> @@ -102,6 +102,7 @@ enum axp288_extcon_irq { >>> }; >>> >>> static const unsigned int axp288_extcon_cables[] = { >>> + EXTCON_USB, >>> EXTCON_CHG_USB_SDP, >>> EXTCON_CHG_USB_CDP, >>> EXTCON_CHG_USB_DCP, >>> @@ -225,8 +226,12 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) >>> vbus_attach ? USB_EVENT_VBUS : USB_EVENT_NONE, NULL); >>> } >>> >>> - if (notify_charger) >>> + if (notify_charger) { >>> extcon_set_state_sync(info->edev, cable, vbus_attach); >>> + if (cable == EXTCON_CHG_USB_SDP) >>> + extcon_set_state_sync(info->edev, EXTCON_USB, >>> + vbus_attach); >>> + } >>> >>> /* Clear the flags on disconnect event */ >>> if (!vbus_attach) >>> >> >> The extcon-axp288.c driver has some patches on extcon-next[1] branch. >> [1] https://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/log/?h=extcon-next >> >> I rework your patch on extcon-next branch as following: >> If you ok, I'll merge it for v4.11. > > It is okay for me. Thanks. Applied it. Thanks. [snip] -- Regards, Chanwoo Choi ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 3/3] phy: rockchip-inno-usb2: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set 2016-12-21 6:10 ` Baolin Wang @ 2016-12-21 6:10 ` Baolin Wang -1 siblings, 0 replies; 24+ messages in thread From: Baolin Wang @ 2016-12-21 6:10 UTC (permalink / raw) To: myungjoo.ham, cw00.choi, wens, kishon, heiko Cc: linux-kernel, linux-arm-kernel, linux-rockchip, linaro-kernel, baolin.wang, broonie, neilb According to the documentation, we should set the EXTCON_USB when one SDP charger connector was reported. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> --- drivers/phy/phy-rockchip-inno-usb2.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c index 2f99ec9..71fbe0f 100644 --- a/drivers/phy/phy-rockchip-inno-usb2.c +++ b/drivers/phy/phy-rockchip-inno-usb2.c @@ -595,9 +595,14 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work) if (rport->vbus_attached != vbus_attach) { rport->vbus_attached = vbus_attach; - if (notify_charger && rphy->edev) + if (notify_charger && rphy->edev) { extcon_set_cable_state_(rphy->edev, cable, vbus_attach); + if (cable == EXTCON_CHG_USB_SDP) + extcon_set_cable_state_(rphy->edev, + EXTCON_USB, + vbus_attach); + } } break; case OTG_STATE_B_PERIPHERAL: -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 3/3] phy: rockchip-inno-usb2: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set @ 2016-12-21 6:10 ` Baolin Wang 0 siblings, 0 replies; 24+ messages in thread From: Baolin Wang @ 2016-12-21 6:10 UTC (permalink / raw) To: linux-arm-kernel According to the documentation, we should set the EXTCON_USB when one SDP charger connector was reported. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> --- drivers/phy/phy-rockchip-inno-usb2.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c index 2f99ec9..71fbe0f 100644 --- a/drivers/phy/phy-rockchip-inno-usb2.c +++ b/drivers/phy/phy-rockchip-inno-usb2.c @@ -595,9 +595,14 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work) if (rport->vbus_attached != vbus_attach) { rport->vbus_attached = vbus_attach; - if (notify_charger && rphy->edev) + if (notify_charger && rphy->edev) { extcon_set_cable_state_(rphy->edev, cable, vbus_attach); + if (cable == EXTCON_CHG_USB_SDP) + extcon_set_cable_state_(rphy->edev, + EXTCON_USB, + vbus_attach); + } } break; case OTG_STATE_B_PERIPHERAL: -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] phy: rockchip-inno-usb2: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set 2016-12-21 6:10 ` Baolin Wang @ 2016-12-21 7:29 ` Chanwoo Choi -1 siblings, 0 replies; 24+ messages in thread From: Chanwoo Choi @ 2016-12-21 7:29 UTC (permalink / raw) To: Baolin Wang, myungjoo.ham, wens, kishon, heiko Cc: linux-kernel, linux-arm-kernel, linux-rockchip, linaro-kernel, broonie, neilb Hi, On 2016년 12월 21일 15:10, Baolin Wang wrote: > According to the documentation, we should set the EXTCON_USB when > one SDP charger connector was reported. > > Signed-off-by: Baolin Wang <baolin.wang@linaro.org> > --- > drivers/phy/phy-rockchip-inno-usb2.c | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c > index 2f99ec9..71fbe0f 100644 > --- a/drivers/phy/phy-rockchip-inno-usb2.c > +++ b/drivers/phy/phy-rockchip-inno-usb2.c > @@ -595,9 +595,14 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work) > if (rport->vbus_attached != vbus_attach) { > rport->vbus_attached = vbus_attach; > > - if (notify_charger && rphy->edev) > + if (notify_charger && rphy->edev) { > extcon_set_cable_state_(rphy->edev, > cable, vbus_attach); > + if (cable == EXTCON_CHG_USB_SDP) > + extcon_set_cable_state_(rphy->edev, > + EXTCON_USB, > + vbus_attach); > + } > } > break; > case OTG_STATE_B_PERIPHERAL: > Looks good to me. But I prefer to use the 'extcon_set_state_sync' intead of extcon_set_cable_state_(). Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> I sent the patches[1] for extcon API to alter the deprecated API. If you possible, I'd like you to alter the extcon API instead of deprecated API. [1] https://patchwork.kernel.org/patch/9453645/ - extcon_set_cable_state_() -> extcon_set_state_sync() - extcon_get_cable_state_() -> extcon_get_state() - Use devm_extcon_register_notifier() instead of extcon_register_notifier(). -- Regards, Chanwoo Choi ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 3/3] phy: rockchip-inno-usb2: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set @ 2016-12-21 7:29 ` Chanwoo Choi 0 siblings, 0 replies; 24+ messages in thread From: Chanwoo Choi @ 2016-12-21 7:29 UTC (permalink / raw) To: linux-arm-kernel Hi, On 2016? 12? 21? 15:10, Baolin Wang wrote: > According to the documentation, we should set the EXTCON_USB when > one SDP charger connector was reported. > > Signed-off-by: Baolin Wang <baolin.wang@linaro.org> > --- > drivers/phy/phy-rockchip-inno-usb2.c | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c > index 2f99ec9..71fbe0f 100644 > --- a/drivers/phy/phy-rockchip-inno-usb2.c > +++ b/drivers/phy/phy-rockchip-inno-usb2.c > @@ -595,9 +595,14 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work) > if (rport->vbus_attached != vbus_attach) { > rport->vbus_attached = vbus_attach; > > - if (notify_charger && rphy->edev) > + if (notify_charger && rphy->edev) { > extcon_set_cable_state_(rphy->edev, > cable, vbus_attach); > + if (cable == EXTCON_CHG_USB_SDP) > + extcon_set_cable_state_(rphy->edev, > + EXTCON_USB, > + vbus_attach); > + } > } > break; > case OTG_STATE_B_PERIPHERAL: > Looks good to me. But I prefer to use the 'extcon_set_state_sync' intead of extcon_set_cable_state_(). Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> I sent the patches[1] for extcon API to alter the deprecated API. If you possible, I'd like you to alter the extcon API instead of deprecated API. [1] https://patchwork.kernel.org/patch/9453645/ - extcon_set_cable_state_() -> extcon_set_state_sync() - extcon_get_cable_state_() -> extcon_get_state() - Use devm_extcon_register_notifier() instead of extcon_register_notifier(). -- Regards, Chanwoo Choi ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] phy: rockchip-inno-usb2: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set 2016-12-21 7:29 ` Chanwoo Choi @ 2016-12-21 7:57 ` Baolin Wang -1 siblings, 0 replies; 24+ messages in thread From: Baolin Wang @ 2016-12-21 7:57 UTC (permalink / raw) To: Chanwoo Choi Cc: myungjoo.ham, Chen-Yu Tsai, Kishon, Heiko Stübner, LKML, linux-arm-kernel, linux-rockchip, Linaro Kernel Mailman List, Mark Brown, NeilBrown Hi, On 21 December 2016 at 15:29, Chanwoo Choi <cw00.choi@samsung.com> wrote: > Hi, > > On 2016년 12월 21일 15:10, Baolin Wang wrote: >> According to the documentation, we should set the EXTCON_USB when >> one SDP charger connector was reported. >> >> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> >> --- >> drivers/phy/phy-rockchip-inno-usb2.c | 7 ++++++- >> 1 file changed, 6 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c >> index 2f99ec9..71fbe0f 100644 >> --- a/drivers/phy/phy-rockchip-inno-usb2.c >> +++ b/drivers/phy/phy-rockchip-inno-usb2.c >> @@ -595,9 +595,14 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work) >> if (rport->vbus_attached != vbus_attach) { >> rport->vbus_attached = vbus_attach; >> >> - if (notify_charger && rphy->edev) >> + if (notify_charger && rphy->edev) { >> extcon_set_cable_state_(rphy->edev, >> cable, vbus_attach); >> + if (cable == EXTCON_CHG_USB_SDP) >> + extcon_set_cable_state_(rphy->edev, >> + EXTCON_USB, >> + vbus_attach); >> + } >> } >> break; >> case OTG_STATE_B_PERIPHERAL: >> > > Looks good to me. But I prefer to use the 'extcon_set_state_sync' intead of extcon_set_cable_state_(). > Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> > > I sent the patches[1] for extcon API to alter the deprecated API. > If you possible, I'd like you to alter the extcon API instead of deprecated API. Okay, I will change to extcon_set_state_sync() in next version patch. Thanks. > [1] https://patchwork.kernel.org/patch/9453645/ > - extcon_set_cable_state_() -> extcon_set_state_sync() > - extcon_get_cable_state_() -> extcon_get_state() > - Use devm_extcon_register_notifier() instead of extcon_register_notifier(). > > -- > Regards, > Chanwoo Choi -- Baolin.wang Best Regards ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 3/3] phy: rockchip-inno-usb2: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set @ 2016-12-21 7:57 ` Baolin Wang 0 siblings, 0 replies; 24+ messages in thread From: Baolin Wang @ 2016-12-21 7:57 UTC (permalink / raw) To: linux-arm-kernel Hi, On 21 December 2016 at 15:29, Chanwoo Choi <cw00.choi@samsung.com> wrote: > Hi, > > On 2016? 12? 21? 15:10, Baolin Wang wrote: >> According to the documentation, we should set the EXTCON_USB when >> one SDP charger connector was reported. >> >> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> >> --- >> drivers/phy/phy-rockchip-inno-usb2.c | 7 ++++++- >> 1 file changed, 6 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c >> index 2f99ec9..71fbe0f 100644 >> --- a/drivers/phy/phy-rockchip-inno-usb2.c >> +++ b/drivers/phy/phy-rockchip-inno-usb2.c >> @@ -595,9 +595,14 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work) >> if (rport->vbus_attached != vbus_attach) { >> rport->vbus_attached = vbus_attach; >> >> - if (notify_charger && rphy->edev) >> + if (notify_charger && rphy->edev) { >> extcon_set_cable_state_(rphy->edev, >> cable, vbus_attach); >> + if (cable == EXTCON_CHG_USB_SDP) >> + extcon_set_cable_state_(rphy->edev, >> + EXTCON_USB, >> + vbus_attach); >> + } >> } >> break; >> case OTG_STATE_B_PERIPHERAL: >> > > Looks good to me. But I prefer to use the 'extcon_set_state_sync' intead of extcon_set_cable_state_(). > Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> > > I sent the patches[1] for extcon API to alter the deprecated API. > If you possible, I'd like you to alter the extcon API instead of deprecated API. Okay, I will change to extcon_set_state_sync() in next version patch. Thanks. > [1] https://patchwork.kernel.org/patch/9453645/ > - extcon_set_cable_state_() -> extcon_set_state_sync() > - extcon_get_cable_state_() -> extcon_get_state() > - Use devm_extcon_register_notifier() instead of extcon_register_notifier(). > > -- > Regards, > Chanwoo Choi -- Baolin.wang Best Regards ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_* 2016-12-21 6:10 ` Baolin Wang @ 2016-12-21 7:20 ` Chanwoo Choi -1 siblings, 0 replies; 24+ messages in thread From: Chanwoo Choi @ 2016-12-21 7:20 UTC (permalink / raw) To: Baolin Wang, myungjoo.ham, wens, kishon, heiko Cc: linux-kernel, linux-arm-kernel, linux-rockchip, linaro-kernel, broonie, neilb Hi, On 2016년 12월 21일 15:10, Baolin Wang wrote: > Current there is both "EXTCON_USB" and "EXTCON_CHG_USB_SDP" which > both seem to suggest a standard downstream port. But there is no > documentation describing how these relate. > > Thus add documentation to describe EXTCON_CHG_USB_SDP should always > appear together with EXTCON_USB, and EXTCON_CHG_USB_ACA would normally > appear with EXTCON_USB_HOST. > > Signed-off-by: Baolin Wang <baolin.wang@linaro.org> > --- > include/linux/extcon.h | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) > > diff --git a/include/linux/extcon.h b/include/linux/extcon.h > index b871c0c..6498b05 100644 > --- a/include/linux/extcon.h > +++ b/include/linux/extcon.h > @@ -46,7 +46,14 @@ > #define EXTCON_USB 1 > #define EXTCON_USB_HOST 2 > > -/* Charging external connector */ > +/* > + * Charging external connector > + * > + * When one SDP charger connector was reported, we should also report > + * the USB connector, which means EXTCON_CHG_USB_SDP should always > + * appear together with EXTCON_USB. The same as ACA charger connector, > + * EXTCON_CHG_USB_ACA should always appear with EXTCON_USB_HOST. > + */ Looks good to me. But, you use the different word for ACA as following: I think that 'would normally' is proper in descritpion. - commit msg : EXTCON_CHG_USB_ACA would normally appear with EXTCON_USB_HOST. - description: EXTCON_CHG_USB_ACA should always appear with EXTCON_USB_HOST. > #define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */ > #define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */ > #define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */ > -- Regards, Chanwoo Choi ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 1/3] extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_* @ 2016-12-21 7:20 ` Chanwoo Choi 0 siblings, 0 replies; 24+ messages in thread From: Chanwoo Choi @ 2016-12-21 7:20 UTC (permalink / raw) To: linux-arm-kernel Hi, On 2016? 12? 21? 15:10, Baolin Wang wrote: > Current there is both "EXTCON_USB" and "EXTCON_CHG_USB_SDP" which > both seem to suggest a standard downstream port. But there is no > documentation describing how these relate. > > Thus add documentation to describe EXTCON_CHG_USB_SDP should always > appear together with EXTCON_USB, and EXTCON_CHG_USB_ACA would normally > appear with EXTCON_USB_HOST. > > Signed-off-by: Baolin Wang <baolin.wang@linaro.org> > --- > include/linux/extcon.h | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) > > diff --git a/include/linux/extcon.h b/include/linux/extcon.h > index b871c0c..6498b05 100644 > --- a/include/linux/extcon.h > +++ b/include/linux/extcon.h > @@ -46,7 +46,14 @@ > #define EXTCON_USB 1 > #define EXTCON_USB_HOST 2 > > -/* Charging external connector */ > +/* > + * Charging external connector > + * > + * When one SDP charger connector was reported, we should also report > + * the USB connector, which means EXTCON_CHG_USB_SDP should always > + * appear together with EXTCON_USB. The same as ACA charger connector, > + * EXTCON_CHG_USB_ACA should always appear with EXTCON_USB_HOST. > + */ Looks good to me. But, you use the different word for ACA as following: I think that 'would normally' is proper in descritpion. - commit msg : EXTCON_CHG_USB_ACA would normally appear with EXTCON_USB_HOST. - description: EXTCON_CHG_USB_ACA should always appear with EXTCON_USB_HOST. > #define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */ > #define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */ > #define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */ > -- Regards, Chanwoo Choi ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_* 2016-12-21 7:20 ` Chanwoo Choi @ 2016-12-21 7:53 ` Baolin Wang -1 siblings, 0 replies; 24+ messages in thread From: Baolin Wang @ 2016-12-21 7:53 UTC (permalink / raw) To: Chanwoo Choi Cc: myungjoo.ham, Chen-Yu Tsai, Kishon, Heiko Stübner, LKML, linux-arm-kernel, linux-rockchip, Linaro Kernel Mailman List, Mark Brown, NeilBrown Hi, On 21 December 2016 at 15:20, Chanwoo Choi <cw00.choi@samsung.com> wrote: > Hi, > > On 2016년 12월 21일 15:10, Baolin Wang wrote: >> Current there is both "EXTCON_USB" and "EXTCON_CHG_USB_SDP" which >> both seem to suggest a standard downstream port. But there is no >> documentation describing how these relate. >> >> Thus add documentation to describe EXTCON_CHG_USB_SDP should always >> appear together with EXTCON_USB, and EXTCON_CHG_USB_ACA would normally >> appear with EXTCON_USB_HOST. >> >> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> >> --- >> include/linux/extcon.h | 9 ++++++++- >> 1 file changed, 8 insertions(+), 1 deletion(-) >> >> diff --git a/include/linux/extcon.h b/include/linux/extcon.h >> index b871c0c..6498b05 100644 >> --- a/include/linux/extcon.h >> +++ b/include/linux/extcon.h >> @@ -46,7 +46,14 @@ >> #define EXTCON_USB 1 >> #define EXTCON_USB_HOST 2 >> >> -/* Charging external connector */ >> +/* >> + * Charging external connector >> + * >> + * When one SDP charger connector was reported, we should also report >> + * the USB connector, which means EXTCON_CHG_USB_SDP should always >> + * appear together with EXTCON_USB. The same as ACA charger connector, >> + * EXTCON_CHG_USB_ACA should always appear with EXTCON_USB_HOST. >> + */ > > Looks good to me. > But, you use the different word for ACA as following: > I think that 'would normally' is proper in descritpion. Okay, I will change to 'would normally' in next version patch. Thanks. > > - commit msg : EXTCON_CHG_USB_ACA would normally appear with EXTCON_USB_HOST. > - description: EXTCON_CHG_USB_ACA should always appear with EXTCON_USB_HOST. > >> #define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */ >> #define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */ >> #define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */ >> > > -- > Regards, > Chanwoo Choi -- Baolin.wang Best Regards ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 1/3] extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_* @ 2016-12-21 7:53 ` Baolin Wang 0 siblings, 0 replies; 24+ messages in thread From: Baolin Wang @ 2016-12-21 7:53 UTC (permalink / raw) To: linux-arm-kernel Hi, On 21 December 2016 at 15:20, Chanwoo Choi <cw00.choi@samsung.com> wrote: > Hi, > > On 2016? 12? 21? 15:10, Baolin Wang wrote: >> Current there is both "EXTCON_USB" and "EXTCON_CHG_USB_SDP" which >> both seem to suggest a standard downstream port. But there is no >> documentation describing how these relate. >> >> Thus add documentation to describe EXTCON_CHG_USB_SDP should always >> appear together with EXTCON_USB, and EXTCON_CHG_USB_ACA would normally >> appear with EXTCON_USB_HOST. >> >> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> >> --- >> include/linux/extcon.h | 9 ++++++++- >> 1 file changed, 8 insertions(+), 1 deletion(-) >> >> diff --git a/include/linux/extcon.h b/include/linux/extcon.h >> index b871c0c..6498b05 100644 >> --- a/include/linux/extcon.h >> +++ b/include/linux/extcon.h >> @@ -46,7 +46,14 @@ >> #define EXTCON_USB 1 >> #define EXTCON_USB_HOST 2 >> >> -/* Charging external connector */ >> +/* >> + * Charging external connector >> + * >> + * When one SDP charger connector was reported, we should also report >> + * the USB connector, which means EXTCON_CHG_USB_SDP should always >> + * appear together with EXTCON_USB. The same as ACA charger connector, >> + * EXTCON_CHG_USB_ACA should always appear with EXTCON_USB_HOST. >> + */ > > Looks good to me. > But, you use the different word for ACA as following: > I think that 'would normally' is proper in descritpion. Okay, I will change to 'would normally' in next version patch. Thanks. > > - commit msg : EXTCON_CHG_USB_ACA would normally appear with EXTCON_USB_HOST. > - description: EXTCON_CHG_USB_ACA should always appear with EXTCON_USB_HOST. > >> #define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */ >> #define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */ >> #define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */ >> > > -- > Regards, > Chanwoo Choi -- Baolin.wang Best Regards ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_* 2016-12-21 7:53 ` Baolin Wang @ 2016-12-21 7:58 ` Chanwoo Choi -1 siblings, 0 replies; 24+ messages in thread From: Chanwoo Choi @ 2016-12-21 7:58 UTC (permalink / raw) To: Baolin Wang Cc: myungjoo.ham, Chen-Yu Tsai, Kishon, Heiko Stübner, LKML, linux-arm-kernel, linux-rockchip, Linaro Kernel Mailman List, Mark Brown, NeilBrown Hi, On 2016년 12월 21일 16:53, Baolin Wang wrote: > Hi, > > On 21 December 2016 at 15:20, Chanwoo Choi <cw00.choi@samsung.com> wrote: >> Hi, >> >> On 2016년 12월 21일 15:10, Baolin Wang wrote: >>> Current there is both "EXTCON_USB" and "EXTCON_CHG_USB_SDP" which >>> both seem to suggest a standard downstream port. But there is no >>> documentation describing how these relate. >>> >>> Thus add documentation to describe EXTCON_CHG_USB_SDP should always >>> appear together with EXTCON_USB, and EXTCON_CHG_USB_ACA would normally >>> appear with EXTCON_USB_HOST. >>> >>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> >>> --- >>> include/linux/extcon.h | 9 ++++++++- >>> 1 file changed, 8 insertions(+), 1 deletion(-) >>> >>> diff --git a/include/linux/extcon.h b/include/linux/extcon.h >>> index b871c0c..6498b05 100644 >>> --- a/include/linux/extcon.h >>> +++ b/include/linux/extcon.h >>> @@ -46,7 +46,14 @@ >>> #define EXTCON_USB 1 >>> #define EXTCON_USB_HOST 2 >>> >>> -/* Charging external connector */ >>> +/* >>> + * Charging external connector >>> + * >>> + * When one SDP charger connector was reported, we should also report >>> + * the USB connector, which means EXTCON_CHG_USB_SDP should always >>> + * appear together with EXTCON_USB. The same as ACA charger connector, >>> + * EXTCON_CHG_USB_ACA should always appear with EXTCON_USB_HOST. >>> + */ >> >> Looks good to me. >> But, you use the different word for ACA as following: >> I think that 'would normally' is proper in descritpion. > > Okay, I will change to 'would normally' in next version patch. Thanks. Don't need to send next patch. I modify it and apply it. Thanks. -- Regards, Chanwoo Choi ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 1/3] extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_* @ 2016-12-21 7:58 ` Chanwoo Choi 0 siblings, 0 replies; 24+ messages in thread From: Chanwoo Choi @ 2016-12-21 7:58 UTC (permalink / raw) To: linux-arm-kernel Hi, On 2016? 12? 21? 16:53, Baolin Wang wrote: > Hi, > > On 21 December 2016 at 15:20, Chanwoo Choi <cw00.choi@samsung.com> wrote: >> Hi, >> >> On 2016? 12? 21? 15:10, Baolin Wang wrote: >>> Current there is both "EXTCON_USB" and "EXTCON_CHG_USB_SDP" which >>> both seem to suggest a standard downstream port. But there is no >>> documentation describing how these relate. >>> >>> Thus add documentation to describe EXTCON_CHG_USB_SDP should always >>> appear together with EXTCON_USB, and EXTCON_CHG_USB_ACA would normally >>> appear with EXTCON_USB_HOST. >>> >>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> >>> --- >>> include/linux/extcon.h | 9 ++++++++- >>> 1 file changed, 8 insertions(+), 1 deletion(-) >>> >>> diff --git a/include/linux/extcon.h b/include/linux/extcon.h >>> index b871c0c..6498b05 100644 >>> --- a/include/linux/extcon.h >>> +++ b/include/linux/extcon.h >>> @@ -46,7 +46,14 @@ >>> #define EXTCON_USB 1 >>> #define EXTCON_USB_HOST 2 >>> >>> -/* Charging external connector */ >>> +/* >>> + * Charging external connector >>> + * >>> + * When one SDP charger connector was reported, we should also report >>> + * the USB connector, which means EXTCON_CHG_USB_SDP should always >>> + * appear together with EXTCON_USB. The same as ACA charger connector, >>> + * EXTCON_CHG_USB_ACA should always appear with EXTCON_USB_HOST. >>> + */ >> >> Looks good to me. >> But, you use the different word for ACA as following: >> I think that 'would normally' is proper in descritpion. > > Okay, I will change to 'would normally' in next version patch. Thanks. Don't need to send next patch. I modify it and apply it. Thanks. -- Regards, Chanwoo Choi ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_* 2016-12-21 7:58 ` Chanwoo Choi @ 2016-12-21 7:59 ` Baolin Wang -1 siblings, 0 replies; 24+ messages in thread From: Baolin Wang @ 2016-12-21 7:59 UTC (permalink / raw) To: Chanwoo Choi Cc: myungjoo.ham, Chen-Yu Tsai, Kishon, Heiko Stübner, LKML, linux-arm-kernel, linux-rockchip, Linaro Kernel Mailman List, Mark Brown, NeilBrown Hi, On 21 December 2016 at 15:58, Chanwoo Choi <cw00.choi@samsung.com> wrote: > Hi, > > On 2016년 12월 21일 16:53, Baolin Wang wrote: >> Hi, >> >> On 21 December 2016 at 15:20, Chanwoo Choi <cw00.choi@samsung.com> wrote: >>> Hi, >>> >>> On 2016년 12월 21일 15:10, Baolin Wang wrote: >>>> Current there is both "EXTCON_USB" and "EXTCON_CHG_USB_SDP" which >>>> both seem to suggest a standard downstream port. But there is no >>>> documentation describing how these relate. >>>> >>>> Thus add documentation to describe EXTCON_CHG_USB_SDP should always >>>> appear together with EXTCON_USB, and EXTCON_CHG_USB_ACA would normally >>>> appear with EXTCON_USB_HOST. >>>> >>>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> >>>> --- >>>> include/linux/extcon.h | 9 ++++++++- >>>> 1 file changed, 8 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/include/linux/extcon.h b/include/linux/extcon.h >>>> index b871c0c..6498b05 100644 >>>> --- a/include/linux/extcon.h >>>> +++ b/include/linux/extcon.h >>>> @@ -46,7 +46,14 @@ >>>> #define EXTCON_USB 1 >>>> #define EXTCON_USB_HOST 2 >>>> >>>> -/* Charging external connector */ >>>> +/* >>>> + * Charging external connector >>>> + * >>>> + * When one SDP charger connector was reported, we should also report >>>> + * the USB connector, which means EXTCON_CHG_USB_SDP should always >>>> + * appear together with EXTCON_USB. The same as ACA charger connector, >>>> + * EXTCON_CHG_USB_ACA should always appear with EXTCON_USB_HOST. >>>> + */ >>> >>> Looks good to me. >>> But, you use the different word for ACA as following: >>> I think that 'would normally' is proper in descritpion. >> >> Okay, I will change to 'would normally' in next version patch. Thanks. > > Don't need to send next patch. I modify it and apply it. Thanks. Okay, Thanks a lot. -- Baolin.wang Best Regards ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 1/3] extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_* @ 2016-12-21 7:59 ` Baolin Wang 0 siblings, 0 replies; 24+ messages in thread From: Baolin Wang @ 2016-12-21 7:59 UTC (permalink / raw) To: linux-arm-kernel Hi, On 21 December 2016 at 15:58, Chanwoo Choi <cw00.choi@samsung.com> wrote: > Hi, > > On 2016? 12? 21? 16:53, Baolin Wang wrote: >> Hi, >> >> On 21 December 2016 at 15:20, Chanwoo Choi <cw00.choi@samsung.com> wrote: >>> Hi, >>> >>> On 2016? 12? 21? 15:10, Baolin Wang wrote: >>>> Current there is both "EXTCON_USB" and "EXTCON_CHG_USB_SDP" which >>>> both seem to suggest a standard downstream port. But there is no >>>> documentation describing how these relate. >>>> >>>> Thus add documentation to describe EXTCON_CHG_USB_SDP should always >>>> appear together with EXTCON_USB, and EXTCON_CHG_USB_ACA would normally >>>> appear with EXTCON_USB_HOST. >>>> >>>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> >>>> --- >>>> include/linux/extcon.h | 9 ++++++++- >>>> 1 file changed, 8 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/include/linux/extcon.h b/include/linux/extcon.h >>>> index b871c0c..6498b05 100644 >>>> --- a/include/linux/extcon.h >>>> +++ b/include/linux/extcon.h >>>> @@ -46,7 +46,14 @@ >>>> #define EXTCON_USB 1 >>>> #define EXTCON_USB_HOST 2 >>>> >>>> -/* Charging external connector */ >>>> +/* >>>> + * Charging external connector >>>> + * >>>> + * When one SDP charger connector was reported, we should also report >>>> + * the USB connector, which means EXTCON_CHG_USB_SDP should always >>>> + * appear together with EXTCON_USB. The same as ACA charger connector, >>>> + * EXTCON_CHG_USB_ACA should always appear with EXTCON_USB_HOST. >>>> + */ >>> >>> Looks good to me. >>> But, you use the different word for ACA as following: >>> I think that 'would normally' is proper in descritpion. >> >> Okay, I will change to 'would normally' in next version patch. Thanks. > > Don't need to send next patch. I modify it and apply it. Thanks. Okay, Thanks a lot. -- Baolin.wang Best Regards ^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2016-12-21 7:59 UTC | newest] Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <CGME20161221061321epcas2p196fd90254d59164e1195840bdd546fa7@epcas2p1.samsung.com> 2016-12-21 6:10 ` [PATCH 1/3] extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_* Baolin Wang 2016-12-21 6:10 ` Baolin Wang 2016-12-21 6:10 ` [PATCH 2/3] extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set Baolin Wang 2016-12-21 6:10 ` Baolin Wang 2016-12-21 7:22 ` Chanwoo Choi 2016-12-21 7:22 ` Chanwoo Choi 2016-12-21 7:55 ` Baolin Wang 2016-12-21 7:55 ` Baolin Wang 2016-12-21 7:59 ` Chanwoo Choi 2016-12-21 7:59 ` Chanwoo Choi 2016-12-21 6:10 ` [PATCH 3/3] phy: rockchip-inno-usb2: " Baolin Wang 2016-12-21 6:10 ` Baolin Wang 2016-12-21 7:29 ` Chanwoo Choi 2016-12-21 7:29 ` Chanwoo Choi 2016-12-21 7:57 ` Baolin Wang 2016-12-21 7:57 ` Baolin Wang 2016-12-21 7:20 ` [PATCH 1/3] extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_* Chanwoo Choi 2016-12-21 7:20 ` Chanwoo Choi 2016-12-21 7:53 ` Baolin Wang 2016-12-21 7:53 ` Baolin Wang 2016-12-21 7:58 ` Chanwoo Choi 2016-12-21 7:58 ` Chanwoo Choi 2016-12-21 7:59 ` Baolin Wang 2016-12-21 7:59 ` Baolin Wang
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.