HP pavilion dv5 1110ew - no hdmi sound

HP pavilion dv5 1110ew - no hdmi sound

[Bartłomiej Holdenmayer]

Welcome,
I have no sound through HDMI.
I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
newest bios F13A. 

I was googling for a week and only solution i found was to upgrade Alsa
and Nvidia to the newest version. I did, but i still do not have sound
over HDMI. In Win$ it is working ok.

http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863

-  
Pozdrawiam / Regards
bartek

GG:541634; ICQ:33920811;

Re: HP pavilion dv5 1110ew - no hdmi sound

[Takashi Iwai]

At Wed, 11 Feb 2009 03:20:44 +0100,
Bartłomiej Holdenmayer wrote:
> 
> Welcome,
> I have no sound through HDMI.
> I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> newest bios F13A. 
> 
> I was googling for a week and only solution i found was to upgrade Alsa
> and Nvidia to the newest version. I did, but i still do not have sound
> over HDMI. In Win$ it is working ok.
> 
> http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863

Try the very latest alsa-driver snapshot below:
    ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz


Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Vedran Miletić]

On Wed, Feb 11, 2009 at 8:48 AM, Takashi Iwai <tiwai@suse.de> wrote:
> At Wed, 11 Feb 2009 03:20:44 +0100,
> Bartłomiej Holdenmayer wrote:
>>
>> Welcome,
>> I have no sound through HDMI.
>> I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
>> newest bios F13A.
>>
>> I was googling for a week and only solution i found was to upgrade Alsa
>> and Nvidia to the newest version. I did, but i still do not have sound
>> over HDMI. In Win$ it is working ok.
>>
>> http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
>
> Try the very latest alsa-driver snapshot below:
>    ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
>
>
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>

Takashi, does ALSA even support standalone NV graphics HDMI? I thought
only MCPs were supported so far.

-- 
Vedran Miletić
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Takashi Iwai]

At Wed, 11 Feb 2009 09:56:45 +0100,
Vedran Miletić wrote:
> 
> On Wed, Feb 11, 2009 at 8:48 AM, Takashi Iwai <tiwai@suse.de> wrote:
> > At Wed, 11 Feb 2009 03:20:44 +0100,
> > Bartłomiej Holdenmayer wrote:
> >>
> >> Welcome,
> >> I have no sound through HDMI.
> >> I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> >> newest bios F13A.
> >>
> >> I was googling for a week and only solution i found was to upgrade Alsa
> >> and Nvidia to the newest version. I did, but i still do not have sound
> >> over HDMI. In Win$ it is working ok.
> >>
> >> http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
> >
> > Try the very latest alsa-driver snapshot below:
> >    ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> >
> >
> > Takashi
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel@alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >
> 
> Takashi, does ALSA even support standalone NV graphics HDMI? I thought
> only MCPs were supported so far.

What are difference between them?  Just my ignorance.

BTW, interestingly, I've seen HP dv5 alsa-info with the very same
PCI SSID (thus supposedly the same model) which has MCP78 HDMI codec
chip.


Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Vedran Miletić]

On Wed, Feb 11, 2009 at 10:11 AM, Takashi Iwai <tiwai@suse.de> wrote:
> What are difference between them?  Just my ignorance.
>
> BTW, interestingly, I've seen HP dv5 alsa-info with the very same
> PCI SSID (thus supposedly the same model) which has MCP78 HDMI codec
> chip.
>
>
> Takashi
>

MCPxx = single-chip northbridge + southbridge, with or without
integrated graphics
Gxx = graphics processor

Now, I might be ignorant here, but wouldn't it be realistic to expect
them to function at least a bit different? MCPs have integrated audio
controller that certainly isn't the same as one used in Gs.

But, well... it might just work. Maybe NVIDIA wanted to make life
easier for developers and used the same logic everywhere.

Doesn't ATI have different HDMI for integrated and discrete?

-- 
Vedran Miletić
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Takashi Iwai]

At Wed, 11 Feb 2009 12:20:57 +0100,
Vedran Miletić wrote:
> 
> On Wed, Feb 11, 2009 at 10:11 AM, Takashi Iwai <tiwai@suse.de> wrote:
> > What are difference between them?  Just my ignorance.
> >
> > BTW, interestingly, I've seen HP dv5 alsa-info with the very same
> > PCI SSID (thus supposedly the same model) which has MCP78 HDMI codec
> > chip.
> >
> >
> > Takashi
> >
> 
> MCPxx = single-chip northbridge + southbridge, with or without
> integrated graphics
> Gxx = graphics processor

Ah, I see your point now.

> Now, I might be ignorant here, but wouldn't it be realistic to expect
> them to function at least a bit different? MCPs have integrated audio
> controller that certainly isn't the same as one used in Gs.

Not that much, at least, from the sound-driver perspective.
Both provide the own HDMI (transmitter) codec.  The sound driver just
needs to set up it.
Of course, there must be a big difference in the graphic hardware
implementation.  But it's all about the graphic driver and the sound
driver can't do anything.

Note that some devices (mostly some old machines before Nvidia MCP
HDMI came out) have special setups.  They hook the SPDIF pin of
another codec into the graphic side.


> But, well... it might just work. Maybe NVIDIA wanted to make life
> easier for developers and used the same logic everywhere.
> 
> Doesn't ATI have different HDMI for integrated and discrete?

The situation is basically same for ATI, Intel and others.


Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Bartłomiej Holdenmayer]

I did with:
sudo sh ./AlsaUpgrade-1.0.x-rev-1.16.sh -snap

Still no succes. 

aplay -l :
**** Lista PLAYBACK urządzeń ****
karta 0: Intel [HDA Intel], urządzenie 0: STAC92xx Analog [STAC92xx
Analog]
  Urządzenia podrzędne: 0/1
  Urządzenie podrzędne #0: subdevice #0
karta 0: Intel [HDA Intel], urządzenie 1: STAC92xx Digital [STAC92xx
Digital]
  Urządzenia podrzędne: 1/1
  Urządzenie podrzędne #0: subdevice #0

No sound trough HDMI.

Maybe i should add hdmi device manually?
-  
Pozdrawiam / Regards
Bartłomiej Holdenmayer

GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer


Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze: 
> At Wed, 11 Feb 2009 03:20:44 +0100,
> Bartłomiej Holdenmayer wrote:
> > 
> > Welcome,
> > I have no sound through HDMI.
> > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> > newest bios F13A. 
> > 
> > I was googling for a week and only solution i found was to upgrade Alsa
> > and Nvidia to the newest version. I did, but i still do not have sound
> > over HDMI. In Win$ it is working ok.
> > 
> > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
> 
> Try the very latest alsa-driver snapshot below:
>     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> 
> 
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Vedran Miletić]

On Wed, Feb 11, 2009 at 8:23 PM, Bartłomiej Holdenmayer <bh@habah.com> wrote:
> I did with:
> sudo sh ./AlsaUpgrade-1.0.x-rev-1.16.sh -snap
>
> Still no succes.
>
> aplay -l :
> **** Lista PLAYBACK urządzeń ****
> karta 0: Intel [HDA Intel], urządzenie 0: STAC92xx Analog [STAC92xx
> Analog]
>  Urządzenia podrzędne: 0/1
>  Urządzenie podrzędne #0: subdevice #0
> karta 0: Intel [HDA Intel], urządzenie 1: STAC92xx Digital [STAC92xx
> Digital]
>  Urządzenia podrzędne: 1/1
>  Urządzenie podrzędne #0: subdevice #0
>
> No sound trough HDMI.
>
> Maybe i should add hdmi device manually?
> -
> Pozdrawiam / Regards
> Bartłomiej Holdenmayer
>
> GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
>
>
> Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:
>> At Wed, 11 Feb 2009 03:20:44 +0100,
>> Bartłomiej Holdenmayer wrote:
>> >
>> > Welcome,
>> > I have no sound through HDMI.
>> > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
>> > newest bios F13A.
>> >
>> > I was googling for a week and only solution i found was to upgrade Alsa
>> > and Nvidia to the newest version. I did, but i still do not have sound
>> > over HDMI. In Win$ it is working ok.
>> >
>> > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
>>
>> Try the very latest alsa-driver snapshot below:
>>     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
>>
>>
>> Takashi
>> _______________________________________________
>> Alsa-devel mailing list
>> Alsa-devel@alsa-project.org
>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>

Can you provide relevant parts (sound and graphics devices) of "lspci -vnn"?

-- 
Vedran Miletić
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Bartłomiej Holdenmayer]

Dnia 2009-02-11, śro o godzinie 20:35 +0100, Vedran Miletić pisze:
> On Wed, Feb 11, 2009 at 8:23 PM, Bartłomiej Holdenmayer <bh@habah.com> wrote:
> > I did with:
> > sudo sh ./AlsaUpgrade-1.0.x-rev-1.16.sh -snap
> >
> > Still no succes.
> >
> > aplay -l :
> > **** Lista PLAYBACK urządzeń ****
> > karta 0: Intel [HDA Intel], urządzenie 0: STAC92xx Analog [STAC92xx
> > Analog]
> >  Urządzenia podrzędne: 0/1
> >  Urządzenie podrzędne #0: subdevice #0
> > karta 0: Intel [HDA Intel], urządzenie 1: STAC92xx Digital [STAC92xx
> > Digital]
> >  Urządzenia podrzędne: 1/1
> >  Urządzenie podrzędne #0: subdevice #0
> >
> > No sound trough HDMI.
> >
> > Maybe i should add hdmi device manually?
> > -
> > Pozdrawiam / Regards
> > Bartłomiej Holdenmayer
> >
> > GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
> >
> >
> > Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:
> >> At Wed, 11 Feb 2009 03:20:44 +0100,
> >> Bartłomiej Holdenmayer wrote:
> >> >
> >> > Welcome,
> >> > I have no sound through HDMI.
> >> > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> >> > newest bios F13A.
> >> >
> >> > I was googling for a week and only solution i found was to upgrade Alsa
> >> > and Nvidia to the newest version. I did, but i still do not have sound
> >> > over HDMI. In Win$ it is working ok.
> >> >
> >> > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
> >>
> >> Try the very latest alsa-driver snapshot below:
> >>     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> >>
> >>
> >> Takashi
> >> _______________________________________________
> >> Alsa-devel mailing list
> >> Alsa-devel@alsa-project.org
> >> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel@alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >
> 
> Can you provide relevant parts (sound and graphics devices) of "lspci -vnn"?
> 
 lspci -vnn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset
Memory Controller Hub [8086:2a40] (rev 07)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, fast devsel, latency 0
	Capabilities: <access denied>
	Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI
Express Graphics Port [8086:2a41] (rev 07)
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: 90000000-92ffffff
	Prefetchable memory behind bridge: 0000000080000000-000000008fffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #4 [8086:2937] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, medium devsel, latency 0, IRQ 16
	I/O ports at a0e0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #5 [8086:2938] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, medium devsel, latency 0, IRQ 21
	I/O ports at a0c0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, medium devsel, latency 0, IRQ 19
	Memory at 9f305c00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD
Audio Controller [8086:293e] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, fast devsel, latency 0, IRQ 214
	Memory at 9f300000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 1 [8086:2940] (rev 03)
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00008000-00008fff
	Memory behind bridge: 9e200000-9f2fffff
	Prefetchable memory behind bridge: 0000000093000000-0000000093ffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 2 [8086:2942] (rev 03)
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00006000-00007fff
	Memory behind bridge: 9d200000-9e1fffff
	Prefetchable memory behind bridge: 0000000094000000-00000000950fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 3 [8086:2944] (rev 03)
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00005000-00005fff
	Memory behind bridge: 9c200000-9d1fffff
	Prefetchable memory behind bridge: 0000000095100000-00000000960fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 4 [8086:2946] (rev 03)
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: 9b200000-9c1fffff
	Prefetchable memory behind bridge: 0000000096100000-00000000970fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 5 [8086:2948] (rev 03)
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: 9a100000-9b1fffff
	Prefetchable memory behind bridge: 0000000097100000-00000000980fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 6 [8086:294a] (rev 03)
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=07, subordinate=09, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 99100000-9a0fffff
	Prefetchable memory behind bridge: 0000000098100000-00000000990fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #1 [8086:2934] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, medium devsel, latency 0, IRQ 20
	I/O ports at a0a0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #2 [8086:2935] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, medium devsel, latency 0, IRQ 19
	I/O ports at a080 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #3 [8086:2936] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, medium devsel, latency 0, IRQ 16
	I/O ports at a060 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #6 [8086:2939] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, medium devsel, latency 0, IRQ 18
	I/O ports at a040 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, medium devsel, latency 0, IRQ 20
	Memory at 9f305800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 93) (prog-if 01)
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=32
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface
Controller [8086:2919] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, medium devsel, latency 0
	Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI
Controller [8086:2929] (rev 03) (prog-if 01)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 215
	I/O ports at a108 [size=8]
	I/O ports at a114 [size=4]
	I/O ports at a100 [size=8]
	I/O ports at a110 [size=4]
	I/O ports at a020 [size=32]
	Memory at 9f305000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus
Controller [8086:2930] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: medium devsel, IRQ 11
	Memory at 9f306000 (64-bit, non-prefetchable) [size=256]
	I/O ports at a000 [size=32]
	Kernel modules: i2c-i801

00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I
(ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: fast devsel, IRQ 11
	Memory at 9f304000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>

01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce
9200M GS [10de:06e8] (rev a1)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at 92000000 (32-bit, non-prefetchable) [size=16M]
	Memory at 80000000 (64-bit, prefetchable) [size=256M]
	Memory at 90000000 (64-bit, non-prefetchable) [size=32M]
	I/O ports at 9000 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: nvidia
	Kernel modules: nvidia, nvidiafb

02:00.0 Network controller [0280]: Broadcom Corporation BCM4312
802.11b/g [14e4:4315] (rev 01)
	Subsystem: Hewlett-Packard Company Device [103c:137d]
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at 9e200000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: wl
	Kernel modules: wl

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev
02)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, fast devsel, latency 0, IRQ 216
	I/O ports at 6000 [size=256]
	Memory at 94010000 (64-bit, prefetchable) [size=4K]
	Memory at 94000000 (64-bit, prefetchable) [size=64K]
	Expansion ROM at 94020000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

06:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technologies, Inc. IEEE
1394 Host Controller [197b:2380] (prog-if 10)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at 9a100000 (32-bit, non-prefetchable) [size=2K]
	Memory at 9a100d00 (32-bit, non-prefetchable) [size=128]
	Memory at 9a100c80 (32-bit, non-prefetchable) [size=128]
	Memory at 9a100c00 (32-bit, non-prefetchable) [size=128]
	Capabilities: <access denied>
	Kernel driver in use: ohci1394
	Kernel modules: ohci1394

06:00.1 System peripheral [0880]: JMicron Technologies, Inc. SD/MMC Host
Controller [197b:2382]
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at 9a100b00 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci-pci

06:00.2 SD Host controller [0805]: JMicron Technologies, Inc. Standard
SD Host Controller [197b:2381] (prog-if 01)
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: fast devsel, IRQ 16
	Memory at 9a100a00 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel modules: sdhci-pci

06:00.3 System peripheral [0880]: JMicron Technologies, Inc. MS Host
Controller [197b:2383]
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, fast devsel, latency 0, IRQ 11
	Memory at 9a100900 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>

06:00.4 System peripheral [0880]: JMicron Technologies, Inc. xD Host
Controller [197b:2384]
	Subsystem: Hewlett-Packard Company Device [103c:3603]
	Flags: bus master, fast devsel, latency 0, IRQ 11
	Memory at 9a100800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>


_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Takashi Iwai]

At Wed, 11 Feb 2009 20:23:35 +0100,
Bartłomiej Holdenmayer wrote:
> 
> I did with:
> sudo sh ./AlsaUpgrade-1.0.x-rev-1.16.sh -snap

What the hack this script does?


Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Bartłomiej Holdenmayer]

Dnia 2009-02-11, śro o godzinie 21:32 +0100, Takashi Iwai pisze:
> At Wed, 11 Feb 2009 20:23:35 +0100,
> Bartłomiej Holdenmayer wrote:
> > 
> > I did with:
> > sudo sh ./AlsaUpgrade-1.0.x-rev-1.16.sh -snap
> 
> What the hack this script does?
> 
> 
> Takashi

Description in full is here:
http://ubuntuforums.org/showthread.php?p=6589810



The main idea of upgrading ALSA with attached script, is the timeshift
of updates through official channels in the range of up to half a year. 

This is IMO not acceptable.

There is a great chance that you get your soundcard up and running or
problems resolved much earlier, if you use the very lastest
ALSA version. The script will get you the latest official stable ALSA
release and - if available - the latest release candidate
for an upcoming release.

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Takashi Iwai]

At Thu, 12 Feb 2009 00:41:22 +0100,
Bartłomiej Holdenmayer wrote:
> 
> Dnia 2009-02-11, śro o godzinie 21:32 +0100, Takashi Iwai pisze:
> > At Wed, 11 Feb 2009 20:23:35 +0100,
> > Bartłomiej Holdenmayer wrote:
> > > 
> > > I did with:
> > > sudo sh ./AlsaUpgrade-1.0.x-rev-1.16.sh -snap
> > 
> > What the hack this script does?
> > 
> > 
> > Takashi
> 
> Description in full is here:
> http://ubuntuforums.org/showthread.php?p=6589810
> 
> 
> 
> The main idea of upgrading ALSA with attached script, is the timeshift
> of updates through official channels in the range of up to half a year. 
> 
> This is IMO not acceptable.
> 
> There is a great chance that you get your soundcard up and running or
> problems resolved much earlier, if you use the very lastest
> ALSA version. The script will get you the latest official stable ALSA
> release and - if available - the latest release candidate
> for an upcoming release.

The released or rc tarballs are way too old for debugging.
Use the snapshot tarball in the URL below (not from
alsa-oroject.org).
    ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz


Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Vedran Miletić]

On Thu, Feb 12, 2009 at 12:54 AM, Takashi Iwai <tiwai@suse.de> wrote:
> At Thu, 12 Feb 2009 00:41:22 +0100,
> Bartłomiej Holdenmayer wrote:
>>
>> Dnia 2009-02-11, śro o godzinie 21:32 +0100, Takashi Iwai pisze:
>> > At Wed, 11 Feb 2009 20:23:35 +0100,
>> > Bartłomiej Holdenmayer wrote:
>> > >
>> > > I did with:
>> > > sudo sh ./AlsaUpgrade-1.0.x-rev-1.16.sh -snap
>> >
>> > What the hack this script does?
>> >
>> >
>> > Takashi
>>
>> Description in full is here:
>> http://ubuntuforums.org/showthread.php?p=6589810
>>
>>
>>
>> The main idea of upgrading ALSA with attached script, is the timeshift
>> of updates through official channels in the range of up to half a year.
>>
>> This is IMO not acceptable.
>>
>> There is a great chance that you get your soundcard up and running or
>> problems resolved much earlier, if you use the very lastest
>> ALSA version. The script will get you the latest official stable ALSA
>> release and - if available - the latest release candidate
>> for an upcoming release.
>
> The released or rc tarballs are way too old for debugging.
> Use the snapshot tarball in the URL below (not from
> alsa-oroject.org).
>    ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
>
>
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>

I don' think this will be enough. If you look at lspci, there is not a
single mention of HDMI device. I believe (well, at least MCP78S has it
that way) that HDMI device should be listed. If it isn't listed for
discrete graphics, then there is some other way that it must be
implemented.

I believe that ATI also lists separate device for HDMI audio.

To be precise, my 8200 board has this:
http://pci-ids.ucw.cz/read/PC/10de/0774, and there is a BIOS option to
enable and disable it.

If there isn't a way to get HDMI audio device listed in lspci (BIOS
option or whatever), I don't believe upgrading ALSA will do much here.

-- 
Vedran Miletić
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Takashi Iwai]

At Thu, 12 Feb 2009 17:19:14 +0100,
Vedran Miletić wrote:
> 
> On Thu, Feb 12, 2009 at 12:54 AM, Takashi Iwai <tiwai@suse.de> wrote:
> > At Thu, 12 Feb 2009 00:41:22 +0100,
> > Bartłomiej Holdenmayer wrote:
> >>
> >> Dnia 2009-02-11, śro o godzinie 21:32 +0100, Takashi Iwai pisze:
> >> > At Wed, 11 Feb 2009 20:23:35 +0100,
> >> > Bartłomiej Holdenmayer wrote:
> >> > >
> >> > > I did with:
> >> > > sudo sh ./AlsaUpgrade-1.0.x-rev-1.16.sh -snap
> >> >
> >> > What the hack this script does?
> >> >
> >> >
> >> > Takashi
> >>
> >> Description in full is here:
> >> http://ubuntuforums.org/showthread.php?p=6589810
> >>
> >>
> >>
> >> The main idea of upgrading ALSA with attached script, is the timeshift
> >> of updates through official channels in the range of up to half a year.
> >>
> >> This is IMO not acceptable.
> >>
> >> There is a great chance that you get your soundcard up and running or
> >> problems resolved much earlier, if you use the very lastest
> >> ALSA version. The script will get you the latest official stable ALSA
> >> release and - if available - the latest release candidate
> >> for an upcoming release.
> >
> > The released or rc tarballs are way too old for debugging.
> > Use the snapshot tarball in the URL below (not from
> > alsa-oroject.org).
> >    ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> >
> >
> > Takashi
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel@alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >
> 
> I don' think this will be enough. If you look at lspci, there is not a
> single mention of HDMI device. I believe (well, at least MCP78S has it
> that way) that HDMI device should be listed.

No, the HDMI part doesn't always appear as an individual PCI device.
It can be simply on hooked onto the audio controller together with
IDT codec.

Indeed, the HP dv5 model with the same PCI SSID shows that pattern.


Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Bartłomiej Holdenmayer]

Dnia 2009-02-12, czw o godzinie 17:19 +0100, Vedran Miletić pisze:
> On Thu, Feb 12, 2009 at 12:54 AM, Takashi Iwai <tiwai@suse.de> wrote:
> > At Thu, 12 Feb 2009 00:41:22 +0100,
> > Bartłomiej Holdenmayer wrote:
> >>
> >> Dnia 2009-02-11, śro o godzinie 21:32 +0100, Takashi Iwai pisze:
> >> > At Wed, 11 Feb 2009 20:23:35 +0100,
> >> > Bartłomiej Holdenmayer wrote:
> >> > >
> >> > > I did with:
> >> > > sudo sh ./AlsaUpgrade-1.0.x-rev-1.16.sh -snap
> >> >
> >> > What the hack this script does?
> >> >
> >> >
> >> > Takashi
> >>
> >> Description in full is here:
> >> http://ubuntuforums.org/showthread.php?p=6589810
> >>
> >>
> >>
> >> The main idea of upgrading ALSA with attached script, is the timeshift
> >> of updates through official channels in the range of up to half a year.
> >>
> >> This is IMO not acceptable.
> >>
> >> There is a great chance that you get your soundcard up and running or
> >> problems resolved much earlier, if you use the very lastest
> >> ALSA version. The script will get you the latest official stable ALSA
> >> release and - if available - the latest release candidate
> >> for an upcoming release.
> >
> > The released or rc tarballs are way too old for debugging.
> > Use the snapshot tarball in the URL below (not from
> > alsa-oroject.org).
> >    ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> >
> >
> > Takashi
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel@alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >
> 
> I don' think this will be enough. If you look at lspci, there is not a
> single mention of HDMI device. I believe (well, at least MCP78S has it
> that way) that HDMI device should be listed. If it isn't listed for
> discrete graphics, then there is some other way that it must be
> implemented.
> 
> I believe that ATI also lists separate device for HDMI audio.
> 
> To be precise, my 8200 board has this:
> http://pci-ids.ucw.cz/read/PC/10de/0774, and there is a BIOS option to
> enable and disable it.
> 
> If there isn't a way to get HDMI audio device listed in lspci (BIOS
> option or whatever), I don't believe upgrading ALSA will do much here.
> 
I my bios there is no such a option about hdmi. It is simple bios - boot
order, passwords and test for hhd, memory.

What else can i do? Is my problem connected with bios, nvidia driver or
alsa? I have the most actual bios, alsa from snap and nvidia 180.11
(most actual from repositories; on nvidia webpage there is 180.22)
-- 
Pozdrawiam / Regards
Bartłomiej Holdenmayer

GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Bartłomiej Holdenmayer]

Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:
> At Wed, 11 Feb 2009 03:20:44 +0100,
> Bartłomiej Holdenmayer wrote:
> > 
> > Welcome,
> > I have no sound through HDMI.
> > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> > newest bios F13A. 
> > 
> > I was googling for a week and only solution i found was to upgrade Alsa
> > and Nvidia to the newest version. I did, but i still do not have sound
> > over HDMI. In Win$ it is working ok.
> > 
> > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
> 
> Try the very latest alsa-driver snapshot below:
>     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> 
> 
> Takashi

Sorry, i messed up thread.
sudo sh ./AlsaUpgrade-1.0.x-rev-1.16.sh -snap
this script is taking actual snapshot from link you gave me.

I did upgrade 5 min ago. What else can i do?

Bartek

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Bartłomiej Holdenmayer]

Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:
> At Wed, 11 Feb 2009 03:20:44 +0100,
> Bartłomiej Holdenmayer wrote:
> > 
> > Welcome,
> > I have no sound through HDMI.
> > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> > newest bios F13A. 
> > 
> > I was googling for a week and only solution i found was to upgrade Alsa
> > and Nvidia to the newest version. I did, but i still do not have sound
> > over HDMI. In Win$ it is working ok.
> > 
> > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
> 
> Try the very latest alsa-driver snapshot below:
>     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> 
> 
> Takashi

I have now the newest nvidia 180.29 from 11.02.09. I have alsa snapshot.
Still sound does not work over hdmi.

I found interesting discussion, but nothing from there is helping me.
http://www.nvnews.net/vbulletin/showthread.php?t=97993&highlight=hdmi&page=7
-- 
Pozdrawiam / Regards
Bartłomiej Holdenmayer

GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Takashi Iwai]

At Fri, 13 Feb 2009 04:37:54 +0100,
Bartłomiej Holdenmayer wrote:
> 
> Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:
> > At Wed, 11 Feb 2009 03:20:44 +0100,
> > Bartłomiej Holdenmayer wrote:
> > > 
> > > Welcome,
> > > I have no sound through HDMI.
> > > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> > > newest bios F13A. 
> > > 
> > > I was googling for a week and only solution i found was to upgrade Alsa
> > > and Nvidia to the newest version. I did, but i still do not have sound
> > > over HDMI. In Win$ it is working ok.
> > > 
> > > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
> > 
> > Try the very latest alsa-driver snapshot below:
> >     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> > 
> > 
> > Takashi
> 
> I have now the newest nvidia 180.29 from 11.02.09. I have alsa snapshot.
> Still sound does not work over hdmi.

Well, then the last suspect is BIOS.

I have to repeat again that I've seen a report regrading HP dv5 with
the same PCI SSID with HDMI working using the latest alsa driver.


Takashi


> I found interesting discussion, but nothing from there is helping me.
> http://www.nvnews.net/vbulletin/showthread.php?t=97993&highlight=hdmi&page=7
> -- 
> Pozdrawiam / Regards
> Bartłomiej Holdenmayer
> 
> GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
> 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Takashi Iwai]

At Fri, 13 Feb 2009 07:58:44 +0100,
I wrote:
> 
> At Fri, 13 Feb 2009 04:37:54 +0100,
> Bartłomiej Holdenmayer wrote:
> > 
> > Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:
> > > At Wed, 11 Feb 2009 03:20:44 +0100,
> > > Bartłomiej Holdenmayer wrote:
> > > > 
> > > > Welcome,
> > > > I have no sound through HDMI.
> > > > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> > > > newest bios F13A. 
> > > > 
> > > > I was googling for a week and only solution i found was to upgrade Alsa
> > > > and Nvidia to the newest version. I did, but i still do not have sound
> > > > over HDMI. In Win$ it is working ok.
> > > > 
> > > > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
> > > 
> > > Try the very latest alsa-driver snapshot below:
> > >     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> > > 
> > > 
> > > Takashi
> > 
> > I have now the newest nvidia 180.29 from 11.02.09. I have alsa snapshot.
> > Still sound does not work over hdmi.
> 
> Well, then the last suspect is BIOS.

BTW, the very latest alsa-driver snapshot includes a new feature to
force the codec probing.  Grab the latest one and try probe_mask=0x1ff
option.  You'll have to see some new messages
	hda_intel: codec_mask forced to 0xff

Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Bartłomiej Holdenmayer]

Dnia 2009-02-13, pią o godzinie 09:03 +0100, Takashi Iwai pisze:
> At Fri, 13 Feb 2009 07:58:44 +0100,
> I wrote:
> > 
> > At Fri, 13 Feb 2009 04:37:54 +0100,
> > Bartłomiej Holdenmayer wrote:
> > > 
> > > Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:
> > > > At Wed, 11 Feb 2009 03:20:44 +0100,
> > > > Bartłomiej Holdenmayer wrote:
> > > > > 
> > > > > Welcome,
> > > > > I have no sound through HDMI.
> > > > > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> > > > > newest bios F13A. 
> > > > > 
> > > > > I was googling for a week and only solution i found was to upgrade Alsa
> > > > > and Nvidia to the newest version. I did, but i still do not have sound
> > > > > over HDMI. In Win$ it is working ok.
> > > > > 
> > > > > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
> > > > 
> > > > Try the very latest alsa-driver snapshot below:
> > > >     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> > > > 
> > > > 
> > > > Takashi
> > > 
> > > I have now the newest nvidia 180.29 from 11.02.09. I have alsa snapshot.
> > > Still sound does not work over hdmi.
> > 
> > Well, then the last suspect is BIOS.
> 
> BTW, the very latest alsa-driver snapshot includes a new feature to
> force the codec probing.  Grab the latest one and try probe_mask=0x1ff
> option.  You'll have to see some new messages
> 	hda_intel: codec_mask forced to 0xff
> 
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Can You please tell me what exactly should I do?
-- 
Pozdrawiam / Regards
Bartłomiej Holdenmayer

GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Takashi Iwai]

At Fri, 13 Feb 2009 22:48:26 +0100,
Bartłomiej Holdenmayer wrote:
> 
> Dnia 2009-02-13, pią o godzinie 09:03 +0100, Takashi Iwai pisze:
> > At Fri, 13 Feb 2009 07:58:44 +0100,
> > I wrote:
> > > 
> > > At Fri, 13 Feb 2009 04:37:54 +0100,
> > > Bartłomiej Holdenmayer wrote:
> > > > 
> > > > Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:
> > > > > At Wed, 11 Feb 2009 03:20:44 +0100,
> > > > > Bartłomiej Holdenmayer wrote:
> > > > > > 
> > > > > > Welcome,
> > > > > > I have no sound through HDMI.
> > > > > > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> > > > > > newest bios F13A. 
> > > > > > 
> > > > > > I was googling for a week and only solution i found was to upgrade Alsa
> > > > > > and Nvidia to the newest version. I did, but i still do not have sound
> > > > > > over HDMI. In Win$ it is working ok.
> > > > > > 
> > > > > > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
> > > > > 
> > > > > Try the very latest alsa-driver snapshot below:
> > > > >     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> > > > > 
> > > > > 
> > > > > Takashi
> > > > 
> > > > I have now the newest nvidia 180.29 from 11.02.09. I have alsa snapshot.
> > > > Still sound does not work over hdmi.
> > > 
> > > Well, then the last suspect is BIOS.
> > 
> > BTW, the very latest alsa-driver snapshot includes a new feature to
> > force the codec probing.  Grab the latest one and try probe_mask=0x1ff
> > option.  You'll have to see some new messages
> > 	hda_intel: codec_mask forced to 0xff
> > 
> > Takashi
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel@alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> 
> Can You please tell me what exactly should I do?

Well, just like what I wrote in the above: grab the latest alsa-driver
snapshot tarball, build it, install it, and add probe_mask=0x1ff
module option to snd-hda-intel, then load it.  If you've done it
properly, you see the message like above.  And let's see whether the
driver can detect more codecs.


Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Bartłomiej Holdenmayer]

Dnia 2009-02-14, sob o godzinie 11:30 +0100, Takashi Iwai pisze:
> At Fri, 13 Feb 2009 22:48:26 +0100,
> Bartłomiej Holdenmayer wrote:
> > 
> > Dnia 2009-02-13, pią o godzinie 09:03 +0100, Takashi Iwai pisze:
> > > At Fri, 13 Feb 2009 07:58:44 +0100,
> > > I wrote:
> > > > 
> > > > At Fri, 13 Feb 2009 04:37:54 +0100,
> > > > Bartłomiej Holdenmayer wrote:
> > > > > 
> > > > > Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:
> > > > > > At Wed, 11 Feb 2009 03:20:44 +0100,
> > > > > > Bartłomiej Holdenmayer wrote:
> > > > > > > 
> > > > > > > Welcome,
> > > > > > > I have no sound through HDMI.
> > > > > > > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> > > > > > > newest bios F13A. 
> > > > > > > 
> > > > > > > I was googling for a week and only solution i found was to upgrade Alsa
> > > > > > > and Nvidia to the newest version. I did, but i still do not have sound
> > > > > > > over HDMI. In Win$ it is working ok.
> > > > > > > 
> > > > > > > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
> > > > > > 
> > > > > > Try the very latest alsa-driver snapshot below:
> > > > > >     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> > > > > > 
> > > > > > 
> > > > > > Takashi
> > > > > 
> > > > > I have now the newest nvidia 180.29 from 11.02.09. I have alsa snapshot.
> > > > > Still sound does not work over hdmi.
> > > > 
> > > > Well, then the last suspect is BIOS.
> > > 
> > > BTW, the very latest alsa-driver snapshot includes a new feature to
> > > force the codec probing.  Grab the latest one and try probe_mask=0x1ff
> > > option.  You'll have to see some new messages
> > > 	hda_intel: codec_mask forced to 0xff
> > > 
> > > Takashi
> > > _______________________________________________
> > > Alsa-devel mailing list
> > > Alsa-devel@alsa-project.org
> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > 
> > Can You please tell me what exactly should I do?
> 
> Well, just like what I wrote in the above: grab the latest alsa-driver
> snapshot tarball, build it, install it, and add probe_mask=0x1ff
> module option to snd-hda-intel, then load it.  If you've done it
> properly, you see the message like above.  And let's see whether the
> driver can detect more codecs.
> 
> 
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

I am not sure if do everything properly.

1. I did installation of alsa snap with script
AlsaUpgrade-1.0.x-rev-1.16.sh;

2. After that, I changed last line in /etc/modprobe.d/alsa-base from:
options snd-hda-intel enable_msi=1

into:
options snd-hda-intel enable_msi=1 probe_mask=0x1ff


3. After I restarted alsa with  /etc/init.d/alsasound stop 
and
/etc/init.d/alsasound start

and get message:
Starting sound driver: snd-hda-intel done

Am I doing that properly? What should I do (what command) to see 
hda_intel: codec_mask forced to 0xff


-- 
Pozdrawiam / Regards
Bartłomiej Holdenmayer

GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Vedran Miletić]

On Sat, Feb 14, 2009 at 3:22 PM, Bartłomiej Holdenmayer <bh@habah.com> wrote:
> I am not sure if do everything properly.
>
> 1. I did installation of alsa snap with script
> AlsaUpgrade-1.0.x-rev-1.16.sh;
>
> 2. After that, I changed last line in /etc/modprobe.d/alsa-base from:
> options snd-hda-intel enable_msi=1
>
> into:
> options snd-hda-intel enable_msi=1 probe_mask=0x1ff
>
>
> 3. After I restarted alsa with  /etc/init.d/alsasound stop
> and
> /etc/init.d/alsasound start
>
> and get message:
> Starting sound driver: snd-hda-intel done
>
> Am I doing that properly? What should I do (what command) to see
> hda_intel: codec_mask forced to 0xff
>
>
> --
> Pozdrawiam / Regards
> Bartłomiej Holdenmayer
>
> GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>

Did you try installing snapshot manually? Script could be bad.

Vedran
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Bartłomiej Holdenmayer]

[-- Attachment #1: Type: text/plain, Size: 1817 bytes --]

Dnia 2009-02-14, sob o godzinie 15:28 +0100, Vedran Miletić pisze:
> On Sat, Feb 14, 2009 at 3:22 PM, Bartłomiej Holdenmayer <bh@habah.com> wrote:
> > I am not sure if do everything properly.
> >
> > 1. I did installation of alsa snap with script
> > AlsaUpgrade-1.0.x-rev-1.16.sh;
> >
> > 2. After that, I changed last line in /etc/modprobe.d/alsa-base from:
> > options snd-hda-intel enable_msi=1
> >
> > into:
> > options snd-hda-intel enable_msi=1 probe_mask=0x1ff
> >
> >
> > 3. After I restarted alsa with  /etc/init.d/alsasound stop
> > and
> > /etc/init.d/alsasound start
> >
> > and get message:
> > Starting sound driver: snd-hda-intel done
> >
> > Am I doing that properly? What should I do (what command) to see
> > hda_intel: codec_mask forced to 0xff
> >
> >
> > --
> > Pozdrawiam / Regards
> > Bartłomiej Holdenmayer
> >
> > GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
> >
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel@alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >
> 
> Did you try installing snapshot manually? Script could be bad.
> 
> Vedran
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

I checked script. It is downloading good snapshot.

There are other options in script:
./configure --with-kernel=/usr/src/linux-headers-$KERNEL
--with-cards=all --with-card-options=all --with-sequencer=yes
--with-oss=yes --prefix=/usr || die "$DRIVER configure failed"

I guess everything is ok. I attach the script.

-- 
Pozdrawiam / Regards
Bartłomiej Holdenmayer

GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer

[-- Attachment #2: AlsaUpgrade-1.0.x-rev-1.16.sh --]
[-- Type: application/x-shellscript, Size: 16035 bytes --]

[-- Attachment #3: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Vedran Miletić]

Yes. but you should try a snapshot instead.

http://ftp.kernel.org/pub/linux/kernel/people/tiwai/alsa/alsa-driver/alsa-driver-unstable-snapshot.tar.bz2

Vedran Miletić



On Sat, Feb 14, 2009 at 3:53 PM, Bartłomiej Holdenmayer <bh@habah.com> wrote:
> Dnia 2009-02-14, sob o godzinie 15:28 +0100, Vedran Miletić pisze:
>> On Sat, Feb 14, 2009 at 3:22 PM, Bartłomiej Holdenmayer <bh@habah.com> wrote:
>> > I am not sure if do everything properly.
>> >
>> > 1. I did installation of alsa snap with script
>> > AlsaUpgrade-1.0.x-rev-1.16.sh;
>> >
>> > 2. After that, I changed last line in /etc/modprobe.d/alsa-base from:
>> > options snd-hda-intel enable_msi=1
>> >
>> > into:
>> > options snd-hda-intel enable_msi=1 probe_mask=0x1ff
>> >
>> >
>> > 3. After I restarted alsa with  /etc/init.d/alsasound stop
>> > and
>> > /etc/init.d/alsasound start
>> >
>> > and get message:
>> > Starting sound driver: snd-hda-intel done
>> >
>> > Am I doing that properly? What should I do (what command) to see
>> > hda_intel: codec_mask forced to 0xff
>> >
>> >
>> > --
>> > Pozdrawiam / Regards
>> > Bartłomiej Holdenmayer
>> >
>> > GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
>> >
>> > _______________________________________________
>> > Alsa-devel mailing list
>> > Alsa-devel@alsa-project.org
>> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>> >
>>
>> Did you try installing snapshot manually? Script could be bad.
>>
>> Vedran
>> _______________________________________________
>> Alsa-devel mailing list
>> Alsa-devel@alsa-project.org
>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
> I checked script. It is downloading good snapshot.
>
> There are other options in script:
> ./configure --with-kernel=/usr/src/linux-headers-$KERNEL
> --with-cards=all --with-card-options=all --with-sequencer=yes
> --with-oss=yes --prefix=/usr || die "$DRIVER configure failed"
>
> I guess everything is ok. I attach the script.
>
> --
> Pozdrawiam / Regards
> Bartłomiej Holdenmayer
>
> GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Bartłomiej Holdenmayer]

Dnia 2009-02-14, sob o godzinie 16:15 +0100, Vedran Miletić pisze:
> Yes. but you should try a snapshot instead.
> 
> http://ftp.kernel.org/pub/linux/kernel/people/tiwai/alsa/alsa-driver/alsa-driver-unstable-snapshot.tar.bz2
> 
> Vedran Miletić
> 
> 
> 
> On Sat, Feb 14, 2009 at 3:53 PM, Bartłomiej Holdenmayer <bh@habah.com> wrote:
> > Dnia 2009-02-14, sob o godzinie 15:28 +0100, Vedran Miletić pisze:
> >> On Sat, Feb 14, 2009 at 3:22 PM, Bartłomiej Holdenmayer <bh@habah.com> wrote:
> >> > I am not sure if do everything properly.
> >> >
> >> > 1. I did installation of alsa snap with script
> >> > AlsaUpgrade-1.0.x-rev-1.16.sh;
> >> >
> >> > 2. After that, I changed last line in /etc/modprobe.d/alsa-base from:
> >> > options snd-hda-intel enable_msi=1
> >> >
> >> > into:
> >> > options snd-hda-intel enable_msi=1 probe_mask=0x1ff
> >> >
> >> >
> >> > 3. After I restarted alsa with  /etc/init.d/alsasound stop
> >> > and
> >> > /etc/init.d/alsasound start
> >> >
> >> > and get message:
> >> > Starting sound driver: snd-hda-intel done
> >> >
> >> > Am I doing that properly? What should I do (what command) to see
> >> > hda_intel: codec_mask forced to 0xff
> >> >
> >> >
> >> > --
> >> > Pozdrawiam / Regards
> >> > Bartłomiej Holdenmayer
> >> >
> >> > GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
> >> >
> >> > _______________________________________________
> >> > Alsa-devel mailing list
> >> > Alsa-devel@alsa-project.org
> >> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >> >
> >>
> >> Did you try installing snapshot manually? Script could be bad.
> >>
> >> Vedran
> >> _______________________________________________
> >> Alsa-devel mailing list
> >> Alsa-devel@alsa-project.org
> >> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >
> > I checked script. It is downloading good snapshot.
> >
> > There are other options in script:
> > ./configure --with-kernel=/usr/src/linux-headers-$KERNEL
> > --with-cards=all --with-card-options=all --with-sequencer=yes
> > --with-oss=yes --prefix=/usr || die "$DRIVER configure failed"
> >
> > I guess everything is ok. I attach the script.
> >
> > --
> > Pozdrawiam / Regards
> > Bartłomiej Holdenmayer
> >
> > GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
> >
I did not noticed before there are 2 of them:
alsa-driver-snapshot
alsa-driver-unstable-snapshot
-- 
Pozdrawiam / Regards
Bartłomiej Holdenmayer

GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Takashi Iwai]

At Sat, 14 Feb 2009 16:15:59 +0100,
Vedran Miletić wrote:
> 
> Yes. but you should try a snapshot instead.
> 
> http://ftp.kernel.org/pub/linux/kernel/people/tiwai/alsa/alsa-driver/alsa-driver-unstable-snapshot.tar.bz2

For HD-audio, alsa-driver-snapshot tarball should suffice (except for
CA0110).  The unstable version is for other things.


Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Takashi Iwai]

At Sat, 14 Feb 2009 15:53:26 +0100,
Bartłomiej Holdenmayer wrote:
> 
> Dnia 2009-02-14, sob o godzinie 15:28 +0100, Vedran Miletić pisze:
> > On Sat, Feb 14, 2009 at 3:22 PM, Bartłomiej Holdenmayer <bh@habah.com> wrote:
> > > I am not sure if do everything properly.
> > >
> > > 1. I did installation of alsa snap with script
> > > AlsaUpgrade-1.0.x-rev-1.16.sh;
> > >
> > > 2. After that, I changed last line in /etc/modprobe.d/alsa-base from:
> > > options snd-hda-intel enable_msi=1
> > >
> > > into:
> > > options snd-hda-intel enable_msi=1 probe_mask=0x1ff
> > >
> > >
> > > 3. After I restarted alsa with  /etc/init.d/alsasound stop
> > > and
> > > /etc/init.d/alsasound start
> > >
> > > and get message:
> > > Starting sound driver: snd-hda-intel done
> > >
> > > Am I doing that properly? What should I do (what command) to see
> > > hda_intel: codec_mask forced to 0xff
> > >
> > >
> > > --
> > > Pozdrawiam / Regards
> > > Bartłomiej Holdenmayer
> > >
> > > GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
> > >
> > > _______________________________________________
> > > Alsa-devel mailing list
> > > Alsa-devel@alsa-project.org
> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > >
> > 
> > Did you try installing snapshot manually? Script could be bad.
> > 
> > Vedran
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel@alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> 
> I checked script. It is downloading good snapshot.
> 
> There are other options in script:
> ./configure --with-kernel=/usr/src/linux-headers-$KERNEL
> --with-cards=all --with-card-options=all --with-sequencer=yes
> --with-oss=yes --prefix=/usr || die "$DRIVER configure failed"
> 
> I guess everything is ok. I attach the script.

After you load the latest driver with that probe_mask option, check
the "kernel messages" (i.e. run dmesg command).  It's not about the
message from modprobe.


Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Bartłomiej Holdenmayer]

Dnia 2009-02-14, sob o godzinie 18:03 +0100, Takashi Iwai pisze:
> At Sat, 14 Feb 2009 15:53:26 +0100,
> Bartłomiej Holdenmayer wrote:
> > 
> > Dnia 2009-02-14, sob o godzinie 15:28 +0100, Vedran Miletić pisze:
> > > On Sat, Feb 14, 2009 at 3:22 PM, Bartłomiej Holdenmayer <bh@habah.com> wrote:
> > > > I am not sure if do everything properly.
> > > >
> > > > 1. I did installation of alsa snap with script
> > > > AlsaUpgrade-1.0.x-rev-1.16.sh;
> > > >
> > > > 2. After that, I changed last line in /etc/modprobe.d/alsa-base from:
> > > > options snd-hda-intel enable_msi=1
> > > >
> > > > into:
> > > > options snd-hda-intel enable_msi=1 probe_mask=0x1ff
> > > >
> > > >
> > > > 3. After I restarted alsa with  /etc/init.d/alsasound stop
> > > > and
> > > > /etc/init.d/alsasound start
> > > >
> > > > and get message:
> > > > Starting sound driver: snd-hda-intel done
> > > >
> > > > Am I doing that properly? What should I do (what command) to see
> > > > hda_intel: codec_mask forced to 0xff
> > > >
> > > >
> > > > --
> > > > Pozdrawiam / Regards
> > > > Bartłomiej Holdenmayer
> > > >
> > > > GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
> > > >
> > > > _______________________________________________
> > > > Alsa-devel mailing list
> > > > Alsa-devel@alsa-project.org
> > > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > > >
> > > 
> > > Did you try installing snapshot manually? Script could be bad.
> > > 
> > > Vedran
> > > _______________________________________________
> > > Alsa-devel mailing list
> > > Alsa-devel@alsa-project.org
> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > 
> > I checked script. It is downloading good snapshot.
> > 
> > There are other options in script:
> > ./configure --with-kernel=/usr/src/linux-headers-$KERNEL
> > --with-cards=all --with-card-options=all --with-sequencer=yes
> > --with-oss=yes --prefix=/usr || die "$DRIVER configure failed"
> > 
> > I guess everything is ok. I attach the script.
> 
> After you load the latest driver with that probe_mask option, check
> the "kernel messages" (i.e. run dmesg command).  It's not about the
> message from modprobe.
> 
> 
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

How to load the latest driver with that probe_mask option
-- 
Pozdrawiam / Regards
Bartłomiej Holdenmayer

GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Bartłomiej Holdenmayer]

Dnia 2009-02-14, sob o godzinie 18:03 +0100, Takashi Iwai pisze:
> At Sat, 14 Feb 2009 15:53:26 +0100,
> Bartłomiej Holdenmayer wrote:
> > 
> > Dnia 2009-02-14, sob o godzinie 15:28 +0100, Vedran Miletić pisze:
> > > On Sat, Feb 14, 2009 at 3:22 PM, Bartłomiej Holdenmayer <bh@habah.com> wrote:
> > > > I am not sure if do everything properly.
> > > >
> > > > 1. I did installation of alsa snap with script
> > > > AlsaUpgrade-1.0.x-rev-1.16.sh;
> > > >
> > > > 2. After that, I changed last line in /etc/modprobe.d/alsa-base from:
> > > > options snd-hda-intel enable_msi=1
> > > >
> > > > into:
> > > > options snd-hda-intel enable_msi=1 probe_mask=0x1ff
> > > >
> > > >
> > > > 3. After I restarted alsa with  /etc/init.d/alsasound stop
> > > > and
> > > > /etc/init.d/alsasound start
> > > >
> > > > and get message:
> > > > Starting sound driver: snd-hda-intel done
> > > >
> > > > Am I doing that properly? What should I do (what command) to see
> > > > hda_intel: codec_mask forced to 0xff
> > > >
> > > >
> > > > --
> > > > Pozdrawiam / Regards
> > > > Bartłomiej Holdenmayer
> > > >
> > > > GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
> > > >
> > > > _______________________________________________
> > > > Alsa-devel mailing list
> > > > Alsa-devel@alsa-project.org
> > > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > > >
> > > 
> > > Did you try installing snapshot manually? Script could be bad.
> > > 
> > > Vedran
> > > _______________________________________________
> > > Alsa-devel mailing list
> > > Alsa-devel@alsa-project.org
> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > 
> > I checked script. It is downloading good snapshot.
> > 
> > There are other options in script:
> > ./configure --with-kernel=/usr/src/linux-headers-$KERNEL
> > --with-cards=all --with-card-options=all --with-sequencer=yes
> > --with-oss=yes --prefix=/usr || die "$DRIVER configure failed"
> > 
> > I guess everything is ok. I attach the script.
> 
> After you load the latest driver with that probe_mask option, check
> the "kernel messages" (i.e. run dmesg command).  It's not about the
> message from modprobe.
> 
> 
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

I changed last line in /etc/modprobe.d/alsa-base from:
options snd-hda-intel enable_msi=1
into:
options snd-hda-intel enable_msi=1 probe_mask=0x1ff
and restarted system.

Is that the way to load the latest driver with that probe_mask option ???? 

My dmesg |grep hda is returnig null.

And dmesg |grep HDA:
[   16.863426] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   16.863506] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   16.987913] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[   17.148503] input: HDA Intel at 0x9f300000 irq 214 Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input12
[   17.148905] input: HDA Intel at 0x9f300000 irq 214 Mic at Sep UNKNOWN Jack as /devices/pci0000:00/0000:00:1b.0/input/input13
[   17.149268] input: HDA Intel at 0x9f300000 irq 214 HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input14


-- 
Pozdrawiam / Regards
Bartłomiej Holdenmayer

GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Bartłomiej Holdenmayer]

Dnia 2009-02-14, sob o godzinie 11:30 +0100, Takashi Iwai pisze:
> At Fri, 13 Feb 2009 22:48:26 +0100,
> Bartłomiej Holdenmayer wrote:
> > 
> > Dnia 2009-02-13, pią o godzinie 09:03 +0100, Takashi Iwai pisze:
> > > At Fri, 13 Feb 2009 07:58:44 +0100,
> > > I wrote:
> > > > 
> > > > At Fri, 13 Feb 2009 04:37:54 +0100,
> > > > Bartłomiej Holdenmayer wrote:
> > > > > 
> > > > > Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:
> > > > > > At Wed, 11 Feb 2009 03:20:44 +0100,
> > > > > > Bartłomiej Holdenmayer wrote:
> > > > > > > 
> > > > > > > Welcome,
> > > > > > > I have no sound through HDMI.
> > > > > > > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> > > > > > > newest bios F13A. 
> > > > > > > 
> > > > > > > I was googling for a week and only solution i found was to upgrade Alsa
> > > > > > > and Nvidia to the newest version. I did, but i still do not have sound
> > > > > > > over HDMI. In Win$ it is working ok.
> > > > > > > 
> > > > > > > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
> > > > > > 
> > > > > > Try the very latest alsa-driver snapshot below:
> > > > > >     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> > > > > > 
> > > > > > 
> > > > > > Takashi
> > > > > 
> > > > > I have now the newest nvidia 180.29 from 11.02.09. I have alsa snapshot.
> > > > > Still sound does not work over hdmi.
> > > > 
> > > > Well, then the last suspect is BIOS.
> > > 
> > > BTW, the very latest alsa-driver snapshot includes a new feature to
> > > force the codec probing.  Grab the latest one and try probe_mask=0x1ff
> > > option.  You'll have to see some new messages
> > > 	hda_intel: codec_mask forced to 0xff
> > > 
> > > Takashi
> > > _______________________________________________
> > > Alsa-devel mailing list
> > > Alsa-devel@alsa-project.org
> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > 
> > Can You please tell me what exactly should I do?
> 
> Well, just like what I wrote in the above: grab the latest alsa-driver
> snapshot tarball, build it, install it, and add probe_mask=0x1ff
> module option to snd-hda-intel, then load it.  If you've done it
> properly, you see the message like above.  And let's see whether the
> driver can detect more codecs.
> 
> 
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

I did ehat You wrote. Here is my dmesg:
[   14.729023] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 2
2
[   14.729028] hda_intel: codec_mask forced to 0xff
[   14.729054] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   15.776021]
ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
ernel/pci/hda/hda_intel.c:634: hda_intel: azx_get_response timeout,
switching to
 polling mode: last cmd=0x100f0000
[   16.780019]
ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #1 probe error;
disabling it...
[   17.816508]
ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #3 probe error;
disabling it...
[   17.921600] input: HDA Digital PCBeep
as /devices/pci0000:00/0000:00:1b.0/inp
ut/input11
[   18.052194] input: HDA Intel at 0x9f300000 irq 22 Mic at Ext Front
Jack as /d
evices/pci0000:00/0000:00:1b.0/input/input12
[   18.052587] input: HDA Intel at 0x9f300000 irq 22 Mic at Sep UNKNOWN
Jack as 
/devices/pci0000:00/0000:00:1b.0/input/input13
[   18.052894] input: HDA Intel at 0x9f300000 irq 22 HP Out at Ext Front
Jack as
 /devices/pci0000:00/0000:00:1b.0/input/input14

What next should I do?

I have basic questions:
Alsa to work good with my HDMI sound have to know what hardware is
onboard and what it can do- features (f.ex.HDMI). What is responsible
for recognition of hardware? Is that alsa-driver package? How can I
force good recognition?

aplay -l list devices it can use. Now for me it is:
artek@hplaptop:~$ aplay -l
**** Lista PLAYBACK urządzeń ****
karta 0: Intel [HDA Intel], urządzenie 0: STAC92xx Analog [STAC92xx
Analog]
  Urządzenia podrzędne: 1/1
  Urządzenie podrzędne #0: subdevice #0
karta 0: Intel [HDA Intel], urządzenie 1: STAC92xx Digital [STAC92xx
Digital]
  Urządzenia podrzędne: 1/1
  Urządzenie podrzędne #0: subdevice #0

Up to my knowledge, as soon as Alsa knows about HDMI feature, i will get
3rd device with aplay -l. Am I right about it?

What is that device: STAC92xx Digital?
--
Pozdrawiam / Regards
Bartłomiej Holdenmayer

GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Vedran Miletić]

On Tue, Feb 17, 2009 at 9:43 PM, Bartłomiej Holdenmayer <bh@habah.com> wrote:
> Dnia 2009-02-14, sob o godzinie 11:30 +0100, Takashi Iwai pisze:
>>
>> Well, just like what I wrote in the above: grab the latest alsa-driver
>> snapshot tarball, build it, install it, and add probe_mask=0x1ff
>> module option to snd-hda-intel, then load it.  If you've done it
>> properly, you see the message like above.  And let's see whether the
>> driver can detect more codecs.
>>
>>
>> Takashi
>> _______________________________________________
>> Alsa-devel mailing list
>> Alsa-devel@alsa-project.org
>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
> I did ehat You wrote. Here is my dmesg:
> [   14.729023] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
> -> IRQ 2
> 2
> [   14.729028] hda_intel: codec_mask forced to 0xff
> [   14.729054] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [   15.776021]
> ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> ernel/pci/hda/hda_intel.c:634: hda_intel: azx_get_response timeout,
> switching to
>  polling mode: last cmd=0x100f0000
> [   16.780019]
> ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #1 probe error;
> disabling it...
> [   17.816508]
> ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #3 probe error;
> disabling it...
> [   17.921600] input: HDA Digital PCBeep
> as /devices/pci0000:00/0000:00:1b.0/inp
> ut/input11
> [   18.052194] input: HDA Intel at 0x9f300000 irq 22 Mic at Ext Front
> Jack as /d
> evices/pci0000:00/0000:00:1b.0/input/input12
> [   18.052587] input: HDA Intel at 0x9f300000 irq 22 Mic at Sep UNKNOWN
> Jack as
> /devices/pci0000:00/0000:00:1b.0/input/input13
> [   18.052894] input: HDA Intel at 0x9f300000 irq 22 HP Out at Ext Front
> Jack as
>  /devices/pci0000:00/0000:00:1b.0/input/input14
>
> What next should I do?
>
> I have basic questions:
> Alsa to work good with my HDMI sound have to know what hardware is
> onboard and what it can do- features (f.ex.HDMI). What is responsible
> for recognition of hardware? Is that alsa-driver package? How can I
> force good recognition?
>
> aplay -l list devices it can use. Now for me it is:
> artek@hplaptop:~$ aplay -l
> **** Lista PLAYBACK urządzeń ****
> karta 0: Intel [HDA Intel], urządzenie 0: STAC92xx Analog [STAC92xx
> Analog]
>  Urządzenia podrzędne: 1/1
>  Urządzenie podrzędne #0: subdevice #0
> karta 0: Intel [HDA Intel], urządzenie 1: STAC92xx Digital [STAC92xx
> Digital]
>  Urządzenia podrzędne: 1/1
>  Urządzenie podrzędne #0: subdevice #0
>
> Up to my knowledge, as soon as Alsa knows about HDMI feature, i will get
> 3rd device with aplay -l. Am I right about it?
>
> What is that device: STAC92xx Digital?
> --
> Pozdrawiam / Regards
> Bartłomiej Holdenmayer
>
> GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>

This *could* be HDMI device, IF it is internally routed that way. Not
sure. Can you give it a shot?

Vedran Miletić
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Takashi Iwai]

At Tue, 17 Feb 2009 21:43:16 +0100,
Bartłomiej Holdenmayer wrote:
> 
> Dnia 2009-02-14, sob o godzinie 11:30 +0100, Takashi Iwai pisze:
> > At Fri, 13 Feb 2009 22:48:26 +0100,
> > Bartłomiej Holdenmayer wrote:
> > > 
> > > Dnia 2009-02-13, pią o godzinie 09:03 +0100, Takashi Iwai pisze:
> > > > At Fri, 13 Feb 2009 07:58:44 +0100,
> > > > I wrote:
> > > > > 
> > > > > At Fri, 13 Feb 2009 04:37:54 +0100,
> > > > > Bartłomiej Holdenmayer wrote:
> > > > > > 
> > > > > > Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:
> > > > > > > At Wed, 11 Feb 2009 03:20:44 +0100,
> > > > > > > Bartłomiej Holdenmayer wrote:
> > > > > > > > 
> > > > > > > > Welcome,
> > > > > > > > I have no sound through HDMI.
> > > > > > > > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> > > > > > > > newest bios F13A. 
> > > > > > > > 
> > > > > > > > I was googling for a week and only solution i found was to upgrade Alsa
> > > > > > > > and Nvidia to the newest version. I did, but i still do not have sound
> > > > > > > > over HDMI. In Win$ it is working ok.
> > > > > > > > 
> > > > > > > > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
> > > > > > > 
> > > > > > > Try the very latest alsa-driver snapshot below:
> > > > > > >     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> > > > > > > 
> > > > > > > 
> > > > > > > Takashi
> > > > > > 
> > > > > > I have now the newest nvidia 180.29 from 11.02.09. I have alsa snapshot.
> > > > > > Still sound does not work over hdmi.
> > > > > 
> > > > > Well, then the last suspect is BIOS.
> > > > 
> > > > BTW, the very latest alsa-driver snapshot includes a new feature to
> > > > force the codec probing.  Grab the latest one and try probe_mask=0x1ff
> > > > option.  You'll have to see some new messages
> > > > 	hda_intel: codec_mask forced to 0xff
> > > > 
> > > > Takashi
> > > > _______________________________________________
> > > > Alsa-devel mailing list
> > > > Alsa-devel@alsa-project.org
> > > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > > 
> > > Can You please tell me what exactly should I do?
> > 
> > Well, just like what I wrote in the above: grab the latest alsa-driver
> > snapshot tarball, build it, install it, and add probe_mask=0x1ff
> > module option to snd-hda-intel, then load it.  If you've done it
> > properly, you see the message like above.  And let's see whether the
> > driver can detect more codecs.
> > 
> > 
> > Takashi
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel@alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> 
> I did ehat You wrote. Here is my dmesg:
> [   14.729023] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
> -> IRQ 2
> 2
> [   14.729028] hda_intel: codec_mask forced to 0xff
> [   14.729054] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [   15.776021]
> ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> ernel/pci/hda/hda_intel.c:634: hda_intel: azx_get_response timeout,
> switching to
>  polling mode: last cmd=0x100f0000
> [   16.780019]
> ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #1 probe error;
> disabling it...
> [   17.816508]
> ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #3 probe error;
> disabling it...
> [   17.921600] input: HDA Digital PCBeep
> as /devices/pci0000:00/0000:00:1b.0/inp
> ut/input11
> [   18.052194] input: HDA Intel at 0x9f300000 irq 22 Mic at Ext Front
> Jack as /d
> evices/pci0000:00/0000:00:1b.0/input/input12
> [   18.052587] input: HDA Intel at 0x9f300000 irq 22 Mic at Sep UNKNOWN
> Jack as 
> /devices/pci0000:00/0000:00:1b.0/input/input13
> [   18.052894] input: HDA Intel at 0x9f300000 irq 22 HP Out at Ext Front
> Jack as
>  /devices/pci0000:00/0000:00:1b.0/input/input14
> 
> What next should I do?
> 
> I have basic questions:
> Alsa to work good with my HDMI sound have to know what hardware is
> onboard and what it can do- features (f.ex.HDMI). What is responsible
> for recognition of hardware? Is that alsa-driver package? How can I
> force good recognition?
> 
> aplay -l list devices it can use. Now for me it is:
> artek@hplaptop:~$ aplay -l
> **** Lista PLAYBACK urządzeń ****
> karta 0: Intel [HDA Intel], urządzenie 0: STAC92xx Analog [STAC92xx
> Analog]
>   Urządzenia podrzędne: 1/1
>   Urządzenie podrzędne #0: subdevice #0
> karta 0: Intel [HDA Intel], urządzenie 1: STAC92xx Digital [STAC92xx
> Digital]
>   Urządzenia podrzędne: 1/1
>   Urządzenie podrzędne #0: subdevice #0
> 
> Up to my knowledge, as soon as Alsa knows about HDMI feature, i will get
> 3rd device with aplay -l. Am I right about it?

It's true for dedicated HDMI codec chip.  But, right now it's mixed
for the HDMI routing from the analog codec chip.  This should be fixed
in future.

> What is that device: STAC92xx Digital?

It's either an SPDIF or an HDMI output.

Turn on "IEC958 Playback Switch", and just try to play something from
the default device.


Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Takashi Iwai]

At Wed, 18 Feb 2009 07:33:42 +0100,
I wrote:
> 
> At Tue, 17 Feb 2009 21:43:16 +0100,
> Bartłomiej Holdenmayer wrote:
> > 
> > Dnia 2009-02-14, sob o godzinie 11:30 +0100, Takashi Iwai pisze:
> > > At Fri, 13 Feb 2009 22:48:26 +0100,
> > > Bartłomiej Holdenmayer wrote:
> > > > 
> > > > Dnia 2009-02-13, pią o godzinie 09:03 +0100, Takashi Iwai pisze:
> > > > > At Fri, 13 Feb 2009 07:58:44 +0100,
> > > > > I wrote:
> > > > > > 
> > > > > > At Fri, 13 Feb 2009 04:37:54 +0100,
> > > > > > Bartłomiej Holdenmayer wrote:
> > > > > > > 
> > > > > > > Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:
> > > > > > > > At Wed, 11 Feb 2009 03:20:44 +0100,
> > > > > > > > Bartłomiej Holdenmayer wrote:
> > > > > > > > > 
> > > > > > > > > Welcome,
> > > > > > > > > I have no sound through HDMI.
> > > > > > > > > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> > > > > > > > > newest bios F13A. 
> > > > > > > > > 
> > > > > > > > > I was googling for a week and only solution i found was to upgrade Alsa
> > > > > > > > > and Nvidia to the newest version. I did, but i still do not have sound
> > > > > > > > > over HDMI. In Win$ it is working ok.
> > > > > > > > > 
> > > > > > > > > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
> > > > > > > > 
> > > > > > > > Try the very latest alsa-driver snapshot below:
> > > > > > > >     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> > > > > > > > 
> > > > > > > > 
> > > > > > > > Takashi
> > > > > > > 
> > > > > > > I have now the newest nvidia 180.29 from 11.02.09. I have alsa snapshot.
> > > > > > > Still sound does not work over hdmi.
> > > > > > 
> > > > > > Well, then the last suspect is BIOS.
> > > > > 
> > > > > BTW, the very latest alsa-driver snapshot includes a new feature to
> > > > > force the codec probing.  Grab the latest one and try probe_mask=0x1ff
> > > > > option.  You'll have to see some new messages
> > > > > 	hda_intel: codec_mask forced to 0xff
> > > > > 
> > > > > Takashi
> > > > > _______________________________________________
> > > > > Alsa-devel mailing list
> > > > > Alsa-devel@alsa-project.org
> > > > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > > > 
> > > > Can You please tell me what exactly should I do?
> > > 
> > > Well, just like what I wrote in the above: grab the latest alsa-driver
> > > snapshot tarball, build it, install it, and add probe_mask=0x1ff
> > > module option to snd-hda-intel, then load it.  If you've done it
> > > properly, you see the message like above.  And let's see whether the
> > > driver can detect more codecs.
> > > 
> > > 
> > > Takashi
> > > _______________________________________________
> > > Alsa-devel mailing list
> > > Alsa-devel@alsa-project.org
> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > 
> > I did ehat You wrote. Here is my dmesg:
> > [   14.729023] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
> > -> IRQ 2
> > 2
> > [   14.729028] hda_intel: codec_mask forced to 0xff
> > [   14.729054] HDA Intel 0000:00:1b.0: setting latency timer to 64
> > [   15.776021]
> > ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> > ernel/pci/hda/hda_intel.c:634: hda_intel: azx_get_response timeout,
> > switching to
> >  polling mode: last cmd=0x100f0000
> > [   16.780019]
> > ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> > ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #1 probe error;
> > disabling it...
> > [   17.816508]
> > ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> > ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #3 probe error;
> > disabling it...
> > [   17.921600] input: HDA Digital PCBeep
> > as /devices/pci0000:00/0000:00:1b.0/inp
> > ut/input11
> > [   18.052194] input: HDA Intel at 0x9f300000 irq 22 Mic at Ext Front
> > Jack as /d
> > evices/pci0000:00/0000:00:1b.0/input/input12
> > [   18.052587] input: HDA Intel at 0x9f300000 irq 22 Mic at Sep UNKNOWN
> > Jack as 
> > /devices/pci0000:00/0000:00:1b.0/input/input13
> > [   18.052894] input: HDA Intel at 0x9f300000 irq 22 HP Out at Ext Front
> > Jack as
> >  /devices/pci0000:00/0000:00:1b.0/input/input14
> > 
> > What next should I do?
> > 
> > I have basic questions:
> > Alsa to work good with my HDMI sound have to know what hardware is
> > onboard and what it can do- features (f.ex.HDMI). What is responsible
> > for recognition of hardware? Is that alsa-driver package? How can I
> > force good recognition?
> > 
> > aplay -l list devices it can use. Now for me it is:
> > artek@hplaptop:~$ aplay -l
> > **** Lista PLAYBACK urządzeń ****
> > karta 0: Intel [HDA Intel], urządzenie 0: STAC92xx Analog [STAC92xx
> > Analog]
> >   Urządzenia podrzędne: 1/1
> >   Urządzenie podrzędne #0: subdevice #0
> > karta 0: Intel [HDA Intel], urządzenie 1: STAC92xx Digital [STAC92xx
> > Digital]
> >   Urządzenia podrzędne: 1/1
> >   Urządzenie podrzędne #0: subdevice #0
> > 
> > Up to my knowledge, as soon as Alsa knows about HDMI feature, i will get
> > 3rd device with aplay -l. Am I right about it?
> 
> It's true for dedicated HDMI codec chip.  But, right now it's mixed
> for the HDMI routing from the analog codec chip.  This should be fixed
> in future.
> 
> > What is that device: STAC92xx Digital?
> 
> It's either an SPDIF or an HDMI output.
> 
> Turn on "IEC958 Playback Switch", and just try to play something from
> the default device.

... and post the alsa-info output, too.


Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[bh]

Quoting Takashi Iwai <tiwai@suse.de>:

> At Wed, 18 Feb 2009 07:33:42 +0100,
> I wrote:
>>
>> At Tue, 17 Feb 2009 21:43:16 +0100,
>> Bartłomiej Holdenmayer wrote:
>> >
>> > Dnia 2009-02-14, sob o godzinie 11:30 +0100, Takashi Iwai pisze:
>> > > At Fri, 13 Feb 2009 22:48:26 +0100,
>> > > Bartłomiej Holdenmayer wrote:
>> > > >
>> > > > Dnia 2009-02-13, pią o godzinie 09:03 +0100, Takashi Iwai pisze:
>> > > > > At Fri, 13 Feb 2009 07:58:44 +0100,
>> > > > > I wrote:
>> > > > > >
>> > > > > > At Fri, 13 Feb 2009 04:37:54 +0100,
>> > > > > > Bartłomiej Holdenmayer wrote:
>> > > > > > >
>> > > > > > > Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:
>> > > > > > > > At Wed, 11 Feb 2009 03:20:44 +0100,
>> > > > > > > > Bartłomiej Holdenmayer wrote:
>> > > > > > > > >
>> > > > > > > > > Welcome,
>> > > > > > > > > I have no sound through HDMI.
>> > > > > > > > > I have Nvidia Geforce 9200M GS with 180.11 driver.   
>> Alsa 1.0.19. And
>> > > > > > > > > newest bios F13A.
>> > > > > > > > >
>> > > > > > > > > I was googling for a week and only solution i found  
>>  was to upgrade Alsa
>> > > > > > > > > and Nvidia to the newest version. I did, but i   
>> still do not have sound
>> > > > > > > > > over HDMI. In Win$ it is working ok.
>> > > > > > > > >
>> > > > > > > > >   
>> http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
>> > > > > > > >
>> > > > > > > > Try the very latest alsa-driver snapshot below:
>> > > > > > > >       
>> ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
>> > > > > > > >
>> > > > > > > >
>> > > > > > > > Takashi
>> > > > > > >
>> > > > > > > I have now the newest nvidia 180.29 from 11.02.09. I   
>> have alsa snapshot.
>> > > > > > > Still sound does not work over hdmi.
>> > > > > >
>> > > > > > Well, then the last suspect is BIOS.
>> > > > >
>> > > > > BTW, the very latest alsa-driver snapshot includes a new feature to
>> > > > > force the codec probing.  Grab the latest one and try   
>> probe_mask=0x1ff
>> > > > > option.  You'll have to see some new messages
>> > > > > 	hda_intel: codec_mask forced to 0xff
>> > > > >
>> > > > > Takashi
>> > > > > _______________________________________________
>> > > > > Alsa-devel mailing list
>> > > > > Alsa-devel@alsa-project.org
>> > > > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>> > > >
>> > > > Can You please tell me what exactly should I do?
>> > >
>> > > Well, just like what I wrote in the above: grab the latest alsa-driver
>> > > snapshot tarball, build it, install it, and add probe_mask=0x1ff
>> > > module option to snd-hda-intel, then load it.  If you've done it
>> > > properly, you see the message like above.  And let's see whether the
>> > > driver can detect more codecs.
>> > >
>> > >
>> > > Takashi
>> > > _______________________________________________
>> > > Alsa-devel mailing list
>> > > Alsa-devel@alsa-project.org
>> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>> >
>> > I did ehat You wrote. Here is my dmesg:
>> > [   14.729023] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
>> > -> IRQ 2
>> > 2
>> > [   14.729028] hda_intel: codec_mask forced to 0xff
>> > [   14.729054] HDA Intel 0000:00:1b.0: setting latency timer to 64
>> > [   15.776021]
>> > ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
>> > ernel/pci/hda/hda_intel.c:634: hda_intel: azx_get_response timeout,
>> > switching to
>> >  polling mode: last cmd=0x100f0000
>> > [   16.780019]
>> > ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
>> > ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #1 probe error;
>> > disabling it...
>> > [   17.816508]
>> > ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
>> > ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #3 probe error;
>> > disabling it...
>> > [   17.921600] input: HDA Digital PCBeep
>> > as /devices/pci0000:00/0000:00:1b.0/inp
>> > ut/input11
>> > [   18.052194] input: HDA Intel at 0x9f300000 irq 22 Mic at Ext Front
>> > Jack as /d
>> > evices/pci0000:00/0000:00:1b.0/input/input12
>> > [   18.052587] input: HDA Intel at 0x9f300000 irq 22 Mic at Sep UNKNOWN
>> > Jack as
>> > /devices/pci0000:00/0000:00:1b.0/input/input13
>> > [   18.052894] input: HDA Intel at 0x9f300000 irq 22 HP Out at Ext Front
>> > Jack as
>> >  /devices/pci0000:00/0000:00:1b.0/input/input14
>> >
>> > What next should I do?
>> >
>> > I have basic questions:
>> > Alsa to work good with my HDMI sound have to know what hardware is
>> > onboard and what it can do- features (f.ex.HDMI). What is responsible
>> > for recognition of hardware? Is that alsa-driver package? How can I
>> > force good recognition?
>> >
>> > aplay -l list devices it can use. Now for me it is:
>> > artek@hplaptop:~$ aplay -l
>> > **** Lista PLAYBACK urządzeń ****
>> > karta 0: Intel [HDA Intel], urządzenie 0: STAC92xx Analog [STAC92xx
>> > Analog]
>> >   Urządzenia podrzędne: 1/1
>> >   Urządzenie podrzędne #0: subdevice #0
>> > karta 0: Intel [HDA Intel], urządzenie 1: STAC92xx Digital [STAC92xx
>> > Digital]
>> >   Urządzenia podrzędne: 1/1
>> >   Urządzenie podrzędne #0: subdevice #0
>> >
>> > Up to my knowledge, as soon as Alsa knows about HDMI feature, i will get
>> > 3rd device with aplay -l. Am I right about it?
>>
>> It's true for dedicated HDMI codec chip.  But, right now it's mixed
>> for the HDMI routing from the analog codec chip.  This should be fixed
>> in future.
>>
>> > What is that device: STAC92xx Digital?
>>
>> It's either an SPDIF or an HDMI output.
>>
>> Turn on "IEC958 Playback Switch", and just try to play something from
>> the default device.
>
> ... and post the alsa-info output, too.
>
>
> Takashi
>

I will try it at evening. I am out of my hp. I have no spdif port, only hdmi.
I have 2 two IEC958 switches in alsa mixer (i do not remember exact  
names). I use gnome-alsa-mixer. Both switches are on.

I was checking before to play  through STAC92xx Digital with aplay.  
Maybe i did something wrong?

Can You tell exact command to test?

Can "System > Preferences > Sound" settings have impact on aplay?

May there be a difference if I boot with HDMI cable in or hotpluged  
into working system?

Once again: What is responsible for recognition of hardware -  
alsa-driver or maybe there is hal involved?

Bartek

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Bartłomiej Holdenmayer]

Dnia 2009-02-18, śro o godzinie 07:59 +0100, Takashi Iwai pisze:
> At Wed, 18 Feb 2009 07:33:42 +0100,
> I wrote:
> > 
> > At Tue, 17 Feb 2009 21:43:16 +0100,
> > Bartłomiej Holdenmayer wrote:
> > > 
> > > Dnia 2009-02-14, sob o godzinie 11:30 +0100, Takashi Iwai pisze:
> > > > At Fri, 13 Feb 2009 22:48:26 +0100,
> > > > Bartłomiej Holdenmayer wrote:
> > > > > 
> > > > > Dnia 2009-02-13, pią o godzinie 09:03 +0100, Takashi Iwai pisze:
> > > > > > At Fri, 13 Feb 2009 07:58:44 +0100,
> > > > > > I wrote:
> > > > > > > 
> > > > > > > At Fri, 13 Feb 2009 04:37:54 +0100,
> > > > > > > Bartłomiej Holdenmayer wrote:
> > > > > > > > 
> > > > > > > > Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:
> > > > > > > > > At Wed, 11 Feb 2009 03:20:44 +0100,
> > > > > > > > > Bartłomiej Holdenmayer wrote:
> > > > > > > > > > 
> > > > > > > > > > Welcome,
> > > > > > > > > > I have no sound through HDMI.
> > > > > > > > > > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> > > > > > > > > > newest bios F13A. 
> > > > > > > > > > 
> > > > > > > > > > I was googling for a week and only solution i found was to upgrade Alsa
> > > > > > > > > > and Nvidia to the newest version. I did, but i still do not have sound
> > > > > > > > > > over HDMI. In Win$ it is working ok.
> > > > > > > > > > 
> > > > > > > > > > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
> > > > > > > > > 
> > > > > > > > > Try the very latest alsa-driver snapshot below:
> > > > > > > > >     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > Takashi
> > > > > > > > 
> > > > > > > > I have now the newest nvidia 180.29 from 11.02.09. I have alsa snapshot.
> > > > > > > > Still sound does not work over hdmi.
> > > > > > > 
> > > > > > > Well, then the last suspect is BIOS.
> > > > > > 
> > > > > > BTW, the very latest alsa-driver snapshot includes a new feature to
> > > > > > force the codec probing.  Grab the latest one and try probe_mask=0x1ff
> > > > > > option.  You'll have to see some new messages
> > > > > > 	hda_intel: codec_mask forced to 0xff
> > > > > > 
> > > > > > Takashi
> > > > > > _______________________________________________
> > > > > > Alsa-devel mailing list
> > > > > > Alsa-devel@alsa-project.org
> > > > > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > > > > 
> > > > > Can You please tell me what exactly should I do?
> > > > 
> > > > Well, just like what I wrote in the above: grab the latest alsa-driver
> > > > snapshot tarball, build it, install it, and add probe_mask=0x1ff
> > > > module option to snd-hda-intel, then load it.  If you've done it
> > > > properly, you see the message like above.  And let's see whether the
> > > > driver can detect more codecs.
> > > > 
> > > > 
> > > > Takashi
> > > > _______________________________________________
> > > > Alsa-devel mailing list
> > > > Alsa-devel@alsa-project.org
> > > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > > 
> > > I did ehat You wrote. Here is my dmesg:
> > > [   14.729023] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
> > > -> IRQ 2
> > > 2
> > > [   14.729028] hda_intel: codec_mask forced to 0xff
> > > [   14.729054] HDA Intel 0000:00:1b.0: setting latency timer to 64
> > > [   15.776021]
> > > ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> > > ernel/pci/hda/hda_intel.c:634: hda_intel: azx_get_response timeout,
> > > switching to
> > >  polling mode: last cmd=0x100f0000
> > > [   16.780019]
> > > ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> > > ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #1 probe error;
> > > disabling it...
> > > [   17.816508]
> > > ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> > > ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #3 probe error;
> > > disabling it...
> > > [   17.921600] input: HDA Digital PCBeep
> > > as /devices/pci0000:00/0000:00:1b.0/inp
> > > ut/input11
> > > [   18.052194] input: HDA Intel at 0x9f300000 irq 22 Mic at Ext Front
> > > Jack as /d
> > > evices/pci0000:00/0000:00:1b.0/input/input12
> > > [   18.052587] input: HDA Intel at 0x9f300000 irq 22 Mic at Sep UNKNOWN
> > > Jack as 
> > > /devices/pci0000:00/0000:00:1b.0/input/input13
> > > [   18.052894] input: HDA Intel at 0x9f300000 irq 22 HP Out at Ext Front
> > > Jack as
> > >  /devices/pci0000:00/0000:00:1b.0/input/input14
> > > 
> > > What next should I do?
> > > 
> > > I have basic questions:
> > > Alsa to work good with my HDMI sound have to know what hardware is
> > > onboard and what it can do- features (f.ex.HDMI). What is responsible
> > > for recognition of hardware? Is that alsa-driver package? How can I
> > > force good recognition?
> > > 
> > > aplay -l list devices it can use. Now for me it is:
> > > artek@hplaptop:~$ aplay -l
> > > **** Lista PLAYBACK urządzeń ****
> > > karta 0: Intel [HDA Intel], urządzenie 0: STAC92xx Analog [STAC92xx
> > > Analog]
> > >   Urządzenia podrzędne: 1/1
> > >   Urządzenie podrzędne #0: subdevice #0
> > > karta 0: Intel [HDA Intel], urządzenie 1: STAC92xx Digital [STAC92xx
> > > Digital]
> > >   Urządzenia podrzędne: 1/1
> > >   Urządzenie podrzędne #0: subdevice #0
> > > 
> > > Up to my knowledge, as soon as Alsa knows about HDMI feature, i will get
> > > 3rd device with aplay -l. Am I right about it?
> > 
> > It's true for dedicated HDMI codec chip.  But, right now it's mixed
> > for the HDMI routing from the analog codec chip.  This should be fixed
> > in future.
> > 
> > > What is that device: STAC92xx Digital?
> > 
> > It's either an SPDIF or an HDMI output.
> > 
> > Turn on "IEC958 Playback Switch", and just try to play something from
> > the default device.
> 
> ... and post the alsa-info output, too.
> 
> 
> Takashi

STILL no succes.

Below is result of my tries:
_______________________
bartek@hplaptop:~$ aplay -D plug:iec958 -c 2 -v /nature1.wav 
Odtwarzanie WAVE '/nature1.wav' : Signed 16 bit Little Endian,
Częstotliwość 11025 Hz, Mono
Plug PCM: Rate conversion PCM (44100, sformat=S16_LE)
Its setup is:
  stream       : PLAYBACK
  access       : RW_INTERLEAVED
  format       : S16_LE
  subformat    : STD
  channels     : 1
  rate         : 11025
  exact rate   : 11025 (11025/1)
  msbits       : 16
  buffer_size  : 4096
  period_size  : 1024
  period_time  : 92879
  tstamp_mode  : NONE
  period_step  : 1
  avail_min    : 1024
  period_event : 0
  start_threshold  : 4096
  stop_threshold   : 4096
  silence_threshold: 0
  silence_size : 0
  boundary     : 268435456
Slave: Route conversion PCM (sformat=S16_LE)
  Transformation table:
    0 <- 0
    1 <- 0
Its setup is:
  stream       : PLAYBACK
  access       : MMAP_INTERLEAVED
  format       : S16_LE
  subformat    : STD
  channels     : 1
  rate         : 44100
  exact rate   : 44100 (44100/1)
  msbits       : 16
  buffer_size  : 16384
  period_size  : 4096
  period_time  : 92879
  tstamp_mode  : NONE
  period_step  : 1
  avail_min    : 4096
  period_event : 0
  start_threshold  : 16384
  stop_threshold   : 16384
  silence_threshold: 0
  silence_size : 0
  boundary     : 1073741824
Slave: Hooks PCM
Its setup is:
  stream       : PLAYBACK
  access       : MMAP_INTERLEAVED
  format       : S16_LE
  subformat    : STD
  channels     : 2
  rate         : 44100
  exact rate   : 44100 (44100/1)
  msbits       : 16
  buffer_size  : 16384
  period_size  : 4096
  period_time  : 92879
  tstamp_mode  : NONE
  period_step  : 1
  avail_min    : 4096
  period_event : 0
  start_threshold  : 16384
  stop_threshold   : 16384
  silence_threshold: 0
  silence_size : 0
  boundary     : 1073741824
Slave: Hardware PCM card 0 'HDA Intel' device 1 subdevice 0
Its setup is:
  stream       : PLAYBACK
  access       : MMAP_INTERLEAVED
  format       : S16_LE
  subformat    : STD
  channels     : 2
  rate         : 44100
  exact rate   : 44100 (44100/1)
  msbits       : 16
  buffer_size  : 16384
  period_size  : 4096
  period_time  : 92879
  tstamp_mode  : NONE
  period_step  : 1
  avail_min    : 4096
  period_event : 0
  start_threshold  : 16384
  stop_threshold   : 16384
  silence_threshold: 0
  silence_size : 0
  boundary     : 1073741824
_______________________
I was playing with iec958 and iec958 default pcm switches. Still no
sound.

Here is my alsa-info:
http://www.alsa-project.org/db/?f=adacd4038a2139cfb2a41239df1885af1721f294

There is one thing that makes me puzzled. In "Volume control" i can
choose which device to control, and i have: 
HDA Intel (Alsa mixer)
Nvidia ID 3 (OSS Mixer) - like gnome knows about 3rd sound device
through Nvidia -hdmi.
-- 
Pozdrawiam / Regards
Bartłomiej Holdenmayer

GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: HP pavilion dv5 1110ew - no hdmi sound

[Jean-Pierre André]

Hi all,

> Dnia 2009-02-14, sob o godzinie 11:30 +0100, Takashi Iwai pisze:
>   
>> At Fri, 13 Feb 2009 22:48:26 +0100,
>> Bartłomiej Holdenmayer wrote:
>>     
>>
>
> I did ehat You wrote. Here is my dmesg:
> [   14.729023] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
> -> IRQ 2
> 2
> [   14.729028] hda_intel: codec_mask forced to 0xff
> [   14.729054] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [   15.776021]
> ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> ernel/pci/hda/hda_intel.c:634: hda_intel: azx_get_response timeout,
> switching to
>  polling mode: last cmd=0x100f0000
> [   16.780019]
> ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #1 probe error;
> disabling it...
> [   17.816508]
> ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #3 probe error;
> disabling it...
> [   17.921600] input: HDA Digital PCBeep
> as /devices/pci0000:00/0000:00:1b.0/inp
> ut/input11
> [   18.052194] input: HDA Intel at 0x9f300000 irq 22 Mic at Ext Front
> Jack as /d
> evices/pci0000:00/0000:00:1b.0/input/input12
> [   18.052587] input: HDA Intel at 0x9f300000 irq 22 Mic at Sep UNKNOWN
> Jack as 
> /devices/pci0000:00/0000:00:1b.0/input/input13
> [   18.052894] input: HDA Intel at 0x9f300000 irq 22 HP Out at Ext Front
> Jack as
>  /devices/pci0000:00/0000:00:1b.0/input/input14

This is very interesting for me, as I have another HP dv4
computer with the same sound chip, and I get roughly
similar results, but with a significant difference (using
Tagashi's snapshot from yesterday) :

HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 22 (level, low) -> IRQ 22
hda_intel: codec_mask forced to 0xff
HDA Intel 0000:00:1b.0: setting latency timer to 64
ALSA 
/home/linux/rpmbuild/BUILD/alsa-driver-1.0.19.217/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:634: 
hda_intel: azx_get_response timeout, switching to polling mode: last 
cmd=0x000f0000
ALSA 
/home/linux/rpmbuild/BUILD/alsa-driver-1.0.19.217/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:1271: 
hda_intel: Codec #1 probe error; disabling it...
ALSA 
/home/linux/rpmbuild/BUILD/alsa-driver-1.0.19.217/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:1271: 
hda_intel: Codec #3 probe error; disabling it...
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
input: HDA Intel at 0xdf300000 irq 22 Line In at Ext Rear Jack as 
/devices/pci0000:00/0000:00:1b.0/input/input13
input: HDA Intel at 0xdf300000 irq 22 Mic at Ext Front Jack as 
/devices/pci0000:00/0000:00:1b.0/input/input14
input: HDA Intel at 0xdf300000 irq 22 HP Out at Ext Front Jack as 
/devices/pci0000:00/0000:00:1b.0/input/input15

The point is I never get an IRQ 22, I get IRQ 20 instead,
so most players do not work unless I boot with irqpoll or
noapic options (mplayer is ok though)

Now, you get the IRQ 22 routed by APIC from PCI INT A,
whereas I have the IRQ 22 routed by APIC from PCI INT B.

And I have the PCI INT A routed to IRQ 20 for USB :

ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller

 From this I conclude that both our sound chips trigger INT A,
but in my case, it is wrongly the INT B that has been connected
to IRQ 22.

So my question to all the techies on this list : how on earth can
I influence on this IRQ routing ?

Regards

Jean-Pierre



_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel