[U-Boot] [PATCH 9/9] at91rm9200ek: add dcc support with at91rm9200ek_dcc_config - Jean-Christophe PLAGNIOL-VILLARD

From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 9/9] at91rm9200ek: add dcc support with at91rm9200ek_dcc_config
Date: Tue,  3 Mar 2009 15:07:45 +0100	[thread overview]
Message-ID: <1236089265-24598-9-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1236089265-24598-8-git-send-email-plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 Makefile                       |   14 +++++++++++++-
 include/configs/at91rm9200ek.h |    4 +++-
 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/Makefile b/Makefile
index 50ce78e..c24115d 100644
--- a/Makefile
+++ b/Makefile
@@ -2605,8 +2605,20 @@ shannon_config	:	unconfig
 at91rm9200dk_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
 
+at91rm9200ek_dcc_multi_config	\
+at91rm9200ek_dcc_config		\
 at91rm9200ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _dcc_mutli, $@)" ] ; then \
+		echo "#define CONFIG_ARM_DCC" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_ARM_DCC_MUTLI" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_CONSOLE_MUX" >> $(obj)include/config.h ; \
+		$(XECHO) "... configured with dcc as multi serial"; \
+	elif [ "$(findstring _dcc_, $@)" ] ; then \
+		echo "#define CONFIG_ARM_DCC"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with dcc as serial" ; \
+	fi;
+	@$(MKCONFIG) -a at91rm9200ek arm arm920t at91rm9200ek atmel at91rm9200
 
 cmc_pu2_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index 2fc4faf..1face05 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -112,6 +112,7 @@
  * define one of these to choose the DBGU,
  * USART0 or USART1 as console
  */
+#if !defined(CONFIG_ARM_DCC) || defined(CONFIG_ARM_DCC_MULTI)
 #define CONFIG_AT91RM9200_USART
 #define CONFIG_DBGU
 #undef CONFIG_USART0
@@ -121,8 +122,9 @@
 /* disable modem initialization stuff */
 #undef	CONFIG_MODEM_SUPPORT
 
-#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
 #define CONFIG_BAUDRATE			115200
+#endif
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
 
 /*
  * Command line configuration.
-- 
1.5.6.5
