From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org,
"Luis R. Rodriguez" <lrodriguez@atheros.com>
Subject: [PATCH 058/102] ath9k_hw: split the generic hardware code by hardware family
Date: Thu, 8 Apr 2010 15:26:54 -0400 [thread overview]
Message-ID: <1270754858-26266-59-git-send-email-lrodriguez@atheros.com> (raw)
In-Reply-To: <1270754858-26266-1-git-send-email-lrodriguez@atheros.com>
Move out the generic hardware family code out into their own
files, we have one for AR5008, AR9001, and AR9002 family (ar9002_hw.c)
and another file for the new AR9003 hardware family (ar9003_hw.c).
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
---
drivers/net/wireless/ath/ath9k/Makefile | 5 +-
drivers/net/wireless/ath/ath9k/ar9002_hw.c | 383 +++++++++++++++++++++
drivers/net/wireless/ath/ath9k/ar9003_hw.c | 149 +++++++++
drivers/net/wireless/ath/ath9k/hw.c | 499 +---------------------------
drivers/net/wireless/ath/ath9k/hw.h | 5 +-
5 files changed, 541 insertions(+), 500 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath9k/ar9002_hw.c
create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_hw.c
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index d2417ed..ee8f7e8 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -13,7 +13,10 @@ ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o
obj-$(CONFIG_ATH9K) += ath9k.o
-ath9k_hw-y:= hw.o \
+ath9k_hw-y:= \
+ ar9002_hw.o \
+ ar9003_hw.o \
+ hw.o \
ar9003_phy.o \
ar9002_phy.o \
ar5008_phy.o \
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
new file mode 100644
index 0000000..bd634fe
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -0,0 +1,383 @@
+/*
+ * Copyright (c) 2008-2010 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "hw.h"
+#include "ar5008_initvals.h"
+#include "ar9001_initvals.h"
+#include "ar9002_initvals.h"
+
+/* General hardware code for the A5008/AR9001/AR9002 hadware families */
+
+static bool ar9002_hw_macversion_supported(u32 macversion)
+{
+ switch (macversion) {
+ case AR_SREV_VERSION_5416_PCI:
+ case AR_SREV_VERSION_5416_PCIE:
+ case AR_SREV_VERSION_9160:
+ case AR_SREV_VERSION_9100:
+ case AR_SREV_VERSION_9280:
+ case AR_SREV_VERSION_9285:
+ case AR_SREV_VERSION_9287:
+ case AR_SREV_VERSION_9271:
+ return true;
+ default:
+ break;
+ }
+ return false;
+}
+
+static void ar9002_hw_init_mode_regs(struct ath_hw *ah)
+{
+ if (AR_SREV_9271(ah)) {
+ INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271,
+ ARRAY_SIZE(ar9271Modes_9271), 6);
+ INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271,
+ ARRAY_SIZE(ar9271Common_9271), 2);
+ INIT_INI_ARRAY(&ah->iniCommon_normal_cck_fir_coeff_9271,
+ ar9271Common_normal_cck_fir_coeff_9271,
+ ARRAY_SIZE(ar9271Common_normal_cck_fir_coeff_9271), 2);
+ INIT_INI_ARRAY(&ah->iniCommon_japan_2484_cck_fir_coeff_9271,
+ ar9271Common_japan_2484_cck_fir_coeff_9271,
+ ARRAY_SIZE(ar9271Common_japan_2484_cck_fir_coeff_9271), 2);
+ INIT_INI_ARRAY(&ah->iniModes_9271_1_0_only,
+ ar9271Modes_9271_1_0_only,
+ ARRAY_SIZE(ar9271Modes_9271_1_0_only), 6);
+ INIT_INI_ARRAY(&ah->iniModes_9271_ANI_reg, ar9271Modes_9271_ANI_reg,
+ ARRAY_SIZE(ar9271Modes_9271_ANI_reg), 6);
+ INIT_INI_ARRAY(&ah->iniModes_high_power_tx_gain_9271,
+ ar9271Modes_high_power_tx_gain_9271,
+ ARRAY_SIZE(ar9271Modes_high_power_tx_gain_9271), 6);
+ INIT_INI_ARRAY(&ah->iniModes_normal_power_tx_gain_9271,
+ ar9271Modes_normal_power_tx_gain_9271,
+ ARRAY_SIZE(ar9271Modes_normal_power_tx_gain_9271), 6);
+ return;
+ }
+
+ if (AR_SREV_9287_11_OR_LATER(ah)) {
+ INIT_INI_ARRAY(&ah->iniModes, ar9287Modes_9287_1_1,
+ ARRAY_SIZE(ar9287Modes_9287_1_1), 6);
+ INIT_INI_ARRAY(&ah->iniCommon, ar9287Common_9287_1_1,
+ ARRAY_SIZE(ar9287Common_9287_1_1), 2);
+ if (ah->config.pcie_clock_req)
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9287PciePhy_clkreq_off_L1_9287_1_1,
+ ARRAY_SIZE(ar9287PciePhy_clkreq_off_L1_9287_1_1), 2);
+ else
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9287PciePhy_clkreq_always_on_L1_9287_1_1,
+ ARRAY_SIZE(ar9287PciePhy_clkreq_always_on_L1_9287_1_1),
+ 2);
+ } else if (AR_SREV_9287_10_OR_LATER(ah)) {
+ INIT_INI_ARRAY(&ah->iniModes, ar9287Modes_9287_1_0,
+ ARRAY_SIZE(ar9287Modes_9287_1_0), 6);
+ INIT_INI_ARRAY(&ah->iniCommon, ar9287Common_9287_1_0,
+ ARRAY_SIZE(ar9287Common_9287_1_0), 2);
+
+ if (ah->config.pcie_clock_req)
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9287PciePhy_clkreq_off_L1_9287_1_0,
+ ARRAY_SIZE(ar9287PciePhy_clkreq_off_L1_9287_1_0), 2);
+ else
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9287PciePhy_clkreq_always_on_L1_9287_1_0,
+ ARRAY_SIZE(ar9287PciePhy_clkreq_always_on_L1_9287_1_0),
+ 2);
+ } else if (AR_SREV_9285_12_OR_LATER(ah)) {
+
+
+ INIT_INI_ARRAY(&ah->iniModes, ar9285Modes_9285_1_2,
+ ARRAY_SIZE(ar9285Modes_9285_1_2), 6);
+ INIT_INI_ARRAY(&ah->iniCommon, ar9285Common_9285_1_2,
+ ARRAY_SIZE(ar9285Common_9285_1_2), 2);
+
+ if (ah->config.pcie_clock_req) {
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9285PciePhy_clkreq_off_L1_9285_1_2,
+ ARRAY_SIZE(ar9285PciePhy_clkreq_off_L1_9285_1_2), 2);
+ } else {
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9285PciePhy_clkreq_always_on_L1_9285_1_2,
+ ARRAY_SIZE(ar9285PciePhy_clkreq_always_on_L1_9285_1_2),
+ 2);
+ }
+ } else if (AR_SREV_9285_10_OR_LATER(ah)) {
+ INIT_INI_ARRAY(&ah->iniModes, ar9285Modes_9285,
+ ARRAY_SIZE(ar9285Modes_9285), 6);
+ INIT_INI_ARRAY(&ah->iniCommon, ar9285Common_9285,
+ ARRAY_SIZE(ar9285Common_9285), 2);
+
+ if (ah->config.pcie_clock_req) {
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9285PciePhy_clkreq_off_L1_9285,
+ ARRAY_SIZE(ar9285PciePhy_clkreq_off_L1_9285), 2);
+ } else {
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9285PciePhy_clkreq_always_on_L1_9285,
+ ARRAY_SIZE(ar9285PciePhy_clkreq_always_on_L1_9285), 2);
+ }
+ } else if (AR_SREV_9280_20_OR_LATER(ah)) {
+ INIT_INI_ARRAY(&ah->iniModes, ar9280Modes_9280_2,
+ ARRAY_SIZE(ar9280Modes_9280_2), 6);
+ INIT_INI_ARRAY(&ah->iniCommon, ar9280Common_9280_2,
+ ARRAY_SIZE(ar9280Common_9280_2), 2);
+
+ if (ah->config.pcie_clock_req) {
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9280PciePhy_clkreq_off_L1_9280,
+ ARRAY_SIZE(ar9280PciePhy_clkreq_off_L1_9280),2);
+ } else {
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9280PciePhy_clkreq_always_on_L1_9280,
+ ARRAY_SIZE(ar9280PciePhy_clkreq_always_on_L1_9280), 2);
+ }
+ INIT_INI_ARRAY(&ah->iniModesAdditional,
+ ar9280Modes_fast_clock_9280_2,
+ ARRAY_SIZE(ar9280Modes_fast_clock_9280_2), 3);
+ } else if (AR_SREV_9280_10_OR_LATER(ah)) {
+ INIT_INI_ARRAY(&ah->iniModes, ar9280Modes_9280,
+ ARRAY_SIZE(ar9280Modes_9280), 6);
+ INIT_INI_ARRAY(&ah->iniCommon, ar9280Common_9280,
+ ARRAY_SIZE(ar9280Common_9280), 2);
+ } else if (AR_SREV_9160_10_OR_LATER(ah)) {
+ INIT_INI_ARRAY(&ah->iniModes, ar5416Modes_9160,
+ ARRAY_SIZE(ar5416Modes_9160), 6);
+ INIT_INI_ARRAY(&ah->iniCommon, ar5416Common_9160,
+ ARRAY_SIZE(ar5416Common_9160), 2);
+ INIT_INI_ARRAY(&ah->iniBank0, ar5416Bank0_9160,
+ ARRAY_SIZE(ar5416Bank0_9160), 2);
+ INIT_INI_ARRAY(&ah->iniBB_RfGain, ar5416BB_RfGain_9160,
+ ARRAY_SIZE(ar5416BB_RfGain_9160), 3);
+ INIT_INI_ARRAY(&ah->iniBank1, ar5416Bank1_9160,
+ ARRAY_SIZE(ar5416Bank1_9160), 2);
+ INIT_INI_ARRAY(&ah->iniBank2, ar5416Bank2_9160,
+ ARRAY_SIZE(ar5416Bank2_9160), 2);
+ INIT_INI_ARRAY(&ah->iniBank3, ar5416Bank3_9160,
+ ARRAY_SIZE(ar5416Bank3_9160), 3);
+ INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6_9160,
+ ARRAY_SIZE(ar5416Bank6_9160), 3);
+ INIT_INI_ARRAY(&ah->iniBank6TPC, ar5416Bank6TPC_9160,
+ ARRAY_SIZE(ar5416Bank6TPC_9160), 3);
+ INIT_INI_ARRAY(&ah->iniBank7, ar5416Bank7_9160,
+ ARRAY_SIZE(ar5416Bank7_9160), 2);
+ if (AR_SREV_9160_11(ah)) {
+ INIT_INI_ARRAY(&ah->iniAddac,
+ ar5416Addac_91601_1,
+ ARRAY_SIZE(ar5416Addac_91601_1), 2);
+ } else {
+ INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9160,
+ ARRAY_SIZE(ar5416Addac_9160), 2);
+ }
+ } else if (AR_SREV_9100_OR_LATER(ah)) {
+ INIT_INI_ARRAY(&ah->iniModes, ar5416Modes_9100,
+ ARRAY_SIZE(ar5416Modes_9100), 6);
+ INIT_INI_ARRAY(&ah->iniCommon, ar5416Common_9100,
+ ARRAY_SIZE(ar5416Common_9100), 2);
+ INIT_INI_ARRAY(&ah->iniBank0, ar5416Bank0_9100,
+ ARRAY_SIZE(ar5416Bank0_9100), 2);
+ INIT_INI_ARRAY(&ah->iniBB_RfGain, ar5416BB_RfGain_9100,
+ ARRAY_SIZE(ar5416BB_RfGain_9100), 3);
+ INIT_INI_ARRAY(&ah->iniBank1, ar5416Bank1_9100,
+ ARRAY_SIZE(ar5416Bank1_9100), 2);
+ INIT_INI_ARRAY(&ah->iniBank2, ar5416Bank2_9100,
+ ARRAY_SIZE(ar5416Bank2_9100), 2);
+ INIT_INI_ARRAY(&ah->iniBank3, ar5416Bank3_9100,
+ ARRAY_SIZE(ar5416Bank3_9100), 3);
+ INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6_9100,
+ ARRAY_SIZE(ar5416Bank6_9100), 3);
+ INIT_INI_ARRAY(&ah->iniBank6TPC, ar5416Bank6TPC_9100,
+ ARRAY_SIZE(ar5416Bank6TPC_9100), 3);
+ INIT_INI_ARRAY(&ah->iniBank7, ar5416Bank7_9100,
+ ARRAY_SIZE(ar5416Bank7_9100), 2);
+ INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9100,
+ ARRAY_SIZE(ar5416Addac_9100), 2);
+ } else {
+ INIT_INI_ARRAY(&ah->iniModes, ar5416Modes,
+ ARRAY_SIZE(ar5416Modes), 6);
+ INIT_INI_ARRAY(&ah->iniCommon, ar5416Common,
+ ARRAY_SIZE(ar5416Common), 2);
+ INIT_INI_ARRAY(&ah->iniBank0, ar5416Bank0,
+ ARRAY_SIZE(ar5416Bank0), 2);
+ INIT_INI_ARRAY(&ah->iniBB_RfGain, ar5416BB_RfGain,
+ ARRAY_SIZE(ar5416BB_RfGain), 3);
+ INIT_INI_ARRAY(&ah->iniBank1, ar5416Bank1,
+ ARRAY_SIZE(ar5416Bank1), 2);
+ INIT_INI_ARRAY(&ah->iniBank2, ar5416Bank2,
+ ARRAY_SIZE(ar5416Bank2), 2);
+ INIT_INI_ARRAY(&ah->iniBank3, ar5416Bank3,
+ ARRAY_SIZE(ar5416Bank3), 3);
+ INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6,
+ ARRAY_SIZE(ar5416Bank6), 3);
+ INIT_INI_ARRAY(&ah->iniBank6TPC, ar5416Bank6TPC,
+ ARRAY_SIZE(ar5416Bank6TPC), 3);
+ INIT_INI_ARRAY(&ah->iniBank7, ar5416Bank7,
+ ARRAY_SIZE(ar5416Bank7), 2);
+ INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac,
+ ARRAY_SIZE(ar5416Addac), 2);
+ }
+}
+
+/*
+ * Helper for ASPM support.
+ *
+ * Disable PLL when in L0s as well as receiver clock when in L1.
+ * This power saving option must be enabled through the SerDes.
+ *
+ * Programming the SerDes must go through the same 288 bit serial shift
+ * register as the other analog registers. Hence the 9 writes.
+ */
+static void ar9002_hw_configpcipowersave(struct ath_hw *ah,
+ int restore,
+ int power_off)
+{
+ u8 i;
+ u32 val;
+
+ if (ah->is_pciexpress != true)
+ return;
+
+ /* Do not touch SerDes registers */
+ if (ah->config.pcie_powersave_enable == 2)
+ return;
+
+ /* Nothing to do on restore for 11N */
+ if (!restore) {
+ if (AR_SREV_9280_20_OR_LATER(ah)) {
+ /*
+ * AR9280 2.0 or later chips use SerDes values from the
+ * initvals.h initialized depending on chipset during
+ * __ath9k_hw_init()
+ */
+ for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) {
+ REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0),
+ INI_RA(&ah->iniPcieSerdes, i, 1));
+ }
+ } else if (AR_SREV_9280(ah) &&
+ (ah->hw_version.macRev == AR_SREV_REVISION_9280_10)) {
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+
+ /* RX shut off when elecidle is asserted */
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560);
+
+ /* Shut off CLKREQ active in L1 */
+ if (ah->config.pcie_clock_req)
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc);
+ else
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd);
+
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007);
+
+ /* Load the new settings */
+ REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
+
+ } else {
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+
+ /* RX shut off when elecidle is asserted */
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
+
+ /*
+ * Ignore ah->ah_config.pcie_clock_req setting for
+ * pre-AR9280 11n
+ */
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
+
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
+
+ /* Load the new settings */
+ REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
+ }
+
+ udelay(1000);
+
+ /* set bit 19 to allow forcing of pcie core into L1 state */
+ REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
+
+ /* Several PCIe massages to ensure proper behaviour */
+ if (ah->config.pcie_waen) {
+ val = ah->config.pcie_waen;
+ if (!power_off)
+ val &= (~AR_WA_D3_L1_DISABLE);
+ } else {
+ if (AR_SREV_9285(ah) || AR_SREV_9271(ah) ||
+ AR_SREV_9287(ah)) {
+ val = AR9285_WA_DEFAULT;
+ if (!power_off)
+ val &= (~AR_WA_D3_L1_DISABLE);
+ } else if (AR_SREV_9280(ah)) {
+ /*
+ * On AR9280 chips bit 22 of 0x4004 needs to be
+ * set otherwise card may disappear.
+ */
+ val = AR9280_WA_DEFAULT;
+ if (!power_off)
+ val &= (~AR_WA_D3_L1_DISABLE);
+ } else
+ val = AR_WA_DEFAULT;
+ }
+
+ REG_WRITE(ah, AR_WA, val);
+ }
+
+ if (power_off) {
+ /*
+ * Set PCIe workaround bits
+ * bit 14 in WA register (disable L1) should only
+ * be set when device enters D3 and be cleared
+ * when device comes back to D0.
+ */
+ if (ah->config.pcie_waen) {
+ if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
+ REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE);
+ } else {
+ if (((AR_SREV_9285(ah) || AR_SREV_9271(ah) ||
+ AR_SREV_9287(ah)) &&
+ (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)) ||
+ (AR_SREV_9280(ah) &&
+ (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE))) {
+ REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE);
+ }
+ }
+ }
+}
+
+/* Sets up the AR5008/AR9001/AR9002 hardware familiy callbacks */
+void ar9002_hw_attach_ops(struct ath_hw *ah)
+{
+ struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
+ struct ath_hw_ops *ops = ath9k_hw_ops(ah);
+
+ priv_ops->init_mode_regs = ar9002_hw_init_mode_regs;
+ priv_ops->macversion_supported = ar9002_hw_macversion_supported;
+
+ ops->config_pci_powersave = ar9002_hw_configpcipowersave;
+
+ ar5008_hw_attach_phy_ops(ah);
+ if (AR_SREV_9280_10_OR_LATER(ah))
+ ar9002_hw_attach_phy_ops(ah);
+
+ ar9002_hw_attach_calib_ops(ah);
+ ar9002_hw_attach_mac_ops(ah);
+}
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
new file mode 100644
index 0000000..6111bdb
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright (c) 2008-2010 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "hw.h"
+#include "ar9003_initvals.h"
+
+/* General hardware code for the AR9003 hadware family */
+
+static bool ar9003_hw_macversion_supported(u32 macversion)
+{
+ switch (macversion) {
+ case AR_SREV_VERSION_9300:
+ return true;
+ default:
+ break;
+ }
+ return false;
+}
+
+/* AR9003 2.0 - new INI format (pre, core, post arrays per subsystem) */
+static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
+{
+ /* mac */
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
+ ar9300_2p0_mac_core,
+ ARRAY_SIZE(ar9300_2p0_mac_core), 2);
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
+ ar9300_2p0_mac_postamble,
+ ARRAY_SIZE(ar9300_2p0_mac_postamble), 5);
+
+ /* bb */
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
+ ar9300_2p0_baseband_core,
+ ARRAY_SIZE(ar9300_2p0_baseband_core), 2);
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
+ ar9300_2p0_baseband_postamble,
+ ARRAY_SIZE(ar9300_2p0_baseband_postamble), 5);
+
+ /* radio */
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
+ ar9300_2p0_radio_core,
+ ARRAY_SIZE(ar9300_2p0_radio_core), 2);
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
+ ar9300_2p0_radio_postamble,
+ ARRAY_SIZE(ar9300_2p0_radio_postamble), 5);
+
+ /* soc */
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
+ ar9300_2p0_soc_preamble,
+ ARRAY_SIZE(ar9300_2p0_soc_preamble), 2);
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST],
+ ar9300_2p0_soc_postamble,
+ ARRAY_SIZE(ar9300_2p0_soc_postamble), 5);
+
+ /* rx/tx gain */
+ INIT_INI_ARRAY(&ah->iniModesRxGain,
+ ar9300Common_rx_gain_table_2p0,
+ ARRAY_SIZE(ar9300Common_rx_gain_table_2p0), 2);
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9300Modes_lowest_ob_db_tx_gain_table_2p0,
+ ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p0),
+ 5);
+
+ /* Load PCIE SERDES settings from INI */
+
+ /* Awake Setting */
+
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9300PciePhy_pll_on_clkreq_disable_L1_2p0,
+ ARRAY_SIZE(ar9300PciePhy_pll_on_clkreq_disable_L1_2p0),
+ 2);
+
+ /* Sleep Setting */
+
+ INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
+ ar9300PciePhy_clkreq_enable_L1_2p0,
+ ARRAY_SIZE(ar9300PciePhy_clkreq_enable_L1_2p0),
+ 2);
+
+ /* Fast clock modal settings */
+ INIT_INI_ARRAY(&ah->iniModesAdditional,
+ ar9300Modes_fast_clock_2p0,
+ ARRAY_SIZE(ar9300Modes_fast_clock_2p0),
+ 3);
+}
+
+/*
+ * Helper for ASPM support.
+ *
+ * Disable PLL when in L0s as well as receiver clock when in L1.
+ * This power saving option must be enabled through the SerDes.
+ *
+ * Programming the SerDes must go through the same 288 bit serial shift
+ * register as the other analog registers. Hence the 9 writes.
+ */
+static void ar9003_hw_configpcipowersave(struct ath_hw *ah,
+ int restore,
+ int power_off)
+{
+ if (ah->is_pciexpress != true)
+ return;
+
+ /* Do not touch SerDes registers */
+ if (ah->config.pcie_powersave_enable == 2)
+ return;
+
+ /* Nothing to do on restore for 11N */
+ if (!restore) {
+ /* set bit 19 to allow forcing of pcie core into L1 state */
+ REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
+
+ /* Several PCIe massages to ensure proper behaviour */
+ if (ah->config.pcie_waen)
+ REG_WRITE(ah, AR_WA, ah->config.pcie_waen);
+ }
+}
+
+/* Sets up the AR9003 hardware familiy callbacks */
+void ar9003_hw_attach_ops(struct ath_hw *ah)
+{
+ struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
+ struct ath_hw_ops *ops = ath9k_hw_ops(ah);
+
+ priv_ops->init_mode_regs = ar9003_hw_init_mode_regs;
+ priv_ops->macversion_supported = ar9003_hw_macversion_supported;
+
+ ops->config_pci_powersave = ar9003_hw_configpcipowersave;
+
+ ar9003_hw_attach_phy_ops(ah);
+ ar9003_hw_attach_calib_ops(ah);
+ ar9003_hw_attach_mac_ops(ah);
+}
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 8f47b7d..39ac6b5 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2008-2009 Atheros Communications Inc.
+ * Copyright (c) 2008-2010 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -14,24 +14,17 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#include <linux/io.h>
#include <asm/unaligned.h>
#include "hw.h"
#include "hw-ops.h"
#include "rc.h"
-#include "ar5008_initvals.h"
-#include "ar9001_initvals.h"
#include "ar9002_initvals.h"
-#include "ar9003_initvals.h"
#define ATH9K_CLOCK_RATE_CCK 22
#define ATH9K_CLOCK_RATE_5GHZ_OFDM 40
#define ATH9K_CLOCK_RATE_2GHZ_OFDM 44
-static void ar9002_hw_attach_ops(struct ath_hw *ah);
-static void ar9003_hw_attach_ops(struct ath_hw *ah);
-
static bool ath9k_hw_set_reset_reg(struct ath_hw *ah, u32 type);
MODULE_AUTHOR("Atheros Communications");
@@ -565,296 +558,6 @@ static int ath9k_hw_post_init(struct ath_hw *ah)
return 0;
}
-static bool ar9002_hw_macversion_supported(u32 macversion)
-{
- switch (macversion) {
- case AR_SREV_VERSION_5416_PCI:
- case AR_SREV_VERSION_5416_PCIE:
- case AR_SREV_VERSION_9160:
- case AR_SREV_VERSION_9100:
- case AR_SREV_VERSION_9280:
- case AR_SREV_VERSION_9285:
- case AR_SREV_VERSION_9287:
- case AR_SREV_VERSION_9271:
- return true;
- default:
- break;
- }
- return false;
-}
-
-static bool ar9003_hw_macversion_supported(u32 macversion)
-{
- switch (macversion) {
- case AR_SREV_VERSION_9300:
- return true;
- default:
- break;
- }
- return false;
-}
-
-static void ar9002_hw_init_mode_regs(struct ath_hw *ah)
-{
- if (AR_SREV_9271(ah)) {
- INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271,
- ARRAY_SIZE(ar9271Modes_9271), 6);
- INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271,
- ARRAY_SIZE(ar9271Common_9271), 2);
- INIT_INI_ARRAY(&ah->iniCommon_normal_cck_fir_coeff_9271,
- ar9271Common_normal_cck_fir_coeff_9271,
- ARRAY_SIZE(ar9271Common_normal_cck_fir_coeff_9271), 2);
- INIT_INI_ARRAY(&ah->iniCommon_japan_2484_cck_fir_coeff_9271,
- ar9271Common_japan_2484_cck_fir_coeff_9271,
- ARRAY_SIZE(ar9271Common_japan_2484_cck_fir_coeff_9271), 2);
- INIT_INI_ARRAY(&ah->iniModes_9271_1_0_only,
- ar9271Modes_9271_1_0_only,
- ARRAY_SIZE(ar9271Modes_9271_1_0_only), 6);
- INIT_INI_ARRAY(&ah->iniModes_9271_ANI_reg, ar9271Modes_9271_ANI_reg,
- ARRAY_SIZE(ar9271Modes_9271_ANI_reg), 6);
- INIT_INI_ARRAY(&ah->iniModes_high_power_tx_gain_9271,
- ar9271Modes_high_power_tx_gain_9271,
- ARRAY_SIZE(ar9271Modes_high_power_tx_gain_9271), 6);
- INIT_INI_ARRAY(&ah->iniModes_normal_power_tx_gain_9271,
- ar9271Modes_normal_power_tx_gain_9271,
- ARRAY_SIZE(ar9271Modes_normal_power_tx_gain_9271), 6);
- return;
- }
-
- if (AR_SREV_9287_11_OR_LATER(ah)) {
- INIT_INI_ARRAY(&ah->iniModes, ar9287Modes_9287_1_1,
- ARRAY_SIZE(ar9287Modes_9287_1_1), 6);
- INIT_INI_ARRAY(&ah->iniCommon, ar9287Common_9287_1_1,
- ARRAY_SIZE(ar9287Common_9287_1_1), 2);
- if (ah->config.pcie_clock_req)
- INIT_INI_ARRAY(&ah->iniPcieSerdes,
- ar9287PciePhy_clkreq_off_L1_9287_1_1,
- ARRAY_SIZE(ar9287PciePhy_clkreq_off_L1_9287_1_1), 2);
- else
- INIT_INI_ARRAY(&ah->iniPcieSerdes,
- ar9287PciePhy_clkreq_always_on_L1_9287_1_1,
- ARRAY_SIZE(ar9287PciePhy_clkreq_always_on_L1_9287_1_1),
- 2);
- } else if (AR_SREV_9287_10_OR_LATER(ah)) {
- INIT_INI_ARRAY(&ah->iniModes, ar9287Modes_9287_1_0,
- ARRAY_SIZE(ar9287Modes_9287_1_0), 6);
- INIT_INI_ARRAY(&ah->iniCommon, ar9287Common_9287_1_0,
- ARRAY_SIZE(ar9287Common_9287_1_0), 2);
-
- if (ah->config.pcie_clock_req)
- INIT_INI_ARRAY(&ah->iniPcieSerdes,
- ar9287PciePhy_clkreq_off_L1_9287_1_0,
- ARRAY_SIZE(ar9287PciePhy_clkreq_off_L1_9287_1_0), 2);
- else
- INIT_INI_ARRAY(&ah->iniPcieSerdes,
- ar9287PciePhy_clkreq_always_on_L1_9287_1_0,
- ARRAY_SIZE(ar9287PciePhy_clkreq_always_on_L1_9287_1_0),
- 2);
- } else if (AR_SREV_9285_12_OR_LATER(ah)) {
-
-
- INIT_INI_ARRAY(&ah->iniModes, ar9285Modes_9285_1_2,
- ARRAY_SIZE(ar9285Modes_9285_1_2), 6);
- INIT_INI_ARRAY(&ah->iniCommon, ar9285Common_9285_1_2,
- ARRAY_SIZE(ar9285Common_9285_1_2), 2);
-
- if (ah->config.pcie_clock_req) {
- INIT_INI_ARRAY(&ah->iniPcieSerdes,
- ar9285PciePhy_clkreq_off_L1_9285_1_2,
- ARRAY_SIZE(ar9285PciePhy_clkreq_off_L1_9285_1_2), 2);
- } else {
- INIT_INI_ARRAY(&ah->iniPcieSerdes,
- ar9285PciePhy_clkreq_always_on_L1_9285_1_2,
- ARRAY_SIZE(ar9285PciePhy_clkreq_always_on_L1_9285_1_2),
- 2);
- }
- } else if (AR_SREV_9285_10_OR_LATER(ah)) {
- INIT_INI_ARRAY(&ah->iniModes, ar9285Modes_9285,
- ARRAY_SIZE(ar9285Modes_9285), 6);
- INIT_INI_ARRAY(&ah->iniCommon, ar9285Common_9285,
- ARRAY_SIZE(ar9285Common_9285), 2);
-
- if (ah->config.pcie_clock_req) {
- INIT_INI_ARRAY(&ah->iniPcieSerdes,
- ar9285PciePhy_clkreq_off_L1_9285,
- ARRAY_SIZE(ar9285PciePhy_clkreq_off_L1_9285), 2);
- } else {
- INIT_INI_ARRAY(&ah->iniPcieSerdes,
- ar9285PciePhy_clkreq_always_on_L1_9285,
- ARRAY_SIZE(ar9285PciePhy_clkreq_always_on_L1_9285), 2);
- }
- } else if (AR_SREV_9280_20_OR_LATER(ah)) {
- INIT_INI_ARRAY(&ah->iniModes, ar9280Modes_9280_2,
- ARRAY_SIZE(ar9280Modes_9280_2), 6);
- INIT_INI_ARRAY(&ah->iniCommon, ar9280Common_9280_2,
- ARRAY_SIZE(ar9280Common_9280_2), 2);
-
- if (ah->config.pcie_clock_req) {
- INIT_INI_ARRAY(&ah->iniPcieSerdes,
- ar9280PciePhy_clkreq_off_L1_9280,
- ARRAY_SIZE(ar9280PciePhy_clkreq_off_L1_9280),2);
- } else {
- INIT_INI_ARRAY(&ah->iniPcieSerdes,
- ar9280PciePhy_clkreq_always_on_L1_9280,
- ARRAY_SIZE(ar9280PciePhy_clkreq_always_on_L1_9280), 2);
- }
- INIT_INI_ARRAY(&ah->iniModesAdditional,
- ar9280Modes_fast_clock_9280_2,
- ARRAY_SIZE(ar9280Modes_fast_clock_9280_2), 3);
- } else if (AR_SREV_9280_10_OR_LATER(ah)) {
- INIT_INI_ARRAY(&ah->iniModes, ar9280Modes_9280,
- ARRAY_SIZE(ar9280Modes_9280), 6);
- INIT_INI_ARRAY(&ah->iniCommon, ar9280Common_9280,
- ARRAY_SIZE(ar9280Common_9280), 2);
- } else if (AR_SREV_9160_10_OR_LATER(ah)) {
- INIT_INI_ARRAY(&ah->iniModes, ar5416Modes_9160,
- ARRAY_SIZE(ar5416Modes_9160), 6);
- INIT_INI_ARRAY(&ah->iniCommon, ar5416Common_9160,
- ARRAY_SIZE(ar5416Common_9160), 2);
- INIT_INI_ARRAY(&ah->iniBank0, ar5416Bank0_9160,
- ARRAY_SIZE(ar5416Bank0_9160), 2);
- INIT_INI_ARRAY(&ah->iniBB_RfGain, ar5416BB_RfGain_9160,
- ARRAY_SIZE(ar5416BB_RfGain_9160), 3);
- INIT_INI_ARRAY(&ah->iniBank1, ar5416Bank1_9160,
- ARRAY_SIZE(ar5416Bank1_9160), 2);
- INIT_INI_ARRAY(&ah->iniBank2, ar5416Bank2_9160,
- ARRAY_SIZE(ar5416Bank2_9160), 2);
- INIT_INI_ARRAY(&ah->iniBank3, ar5416Bank3_9160,
- ARRAY_SIZE(ar5416Bank3_9160), 3);
- INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6_9160,
- ARRAY_SIZE(ar5416Bank6_9160), 3);
- INIT_INI_ARRAY(&ah->iniBank6TPC, ar5416Bank6TPC_9160,
- ARRAY_SIZE(ar5416Bank6TPC_9160), 3);
- INIT_INI_ARRAY(&ah->iniBank7, ar5416Bank7_9160,
- ARRAY_SIZE(ar5416Bank7_9160), 2);
- if (AR_SREV_9160_11(ah)) {
- INIT_INI_ARRAY(&ah->iniAddac,
- ar5416Addac_91601_1,
- ARRAY_SIZE(ar5416Addac_91601_1), 2);
- } else {
- INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9160,
- ARRAY_SIZE(ar5416Addac_9160), 2);
- }
- } else if (AR_SREV_9100_OR_LATER(ah)) {
- INIT_INI_ARRAY(&ah->iniModes, ar5416Modes_9100,
- ARRAY_SIZE(ar5416Modes_9100), 6);
- INIT_INI_ARRAY(&ah->iniCommon, ar5416Common_9100,
- ARRAY_SIZE(ar5416Common_9100), 2);
- INIT_INI_ARRAY(&ah->iniBank0, ar5416Bank0_9100,
- ARRAY_SIZE(ar5416Bank0_9100), 2);
- INIT_INI_ARRAY(&ah->iniBB_RfGain, ar5416BB_RfGain_9100,
- ARRAY_SIZE(ar5416BB_RfGain_9100), 3);
- INIT_INI_ARRAY(&ah->iniBank1, ar5416Bank1_9100,
- ARRAY_SIZE(ar5416Bank1_9100), 2);
- INIT_INI_ARRAY(&ah->iniBank2, ar5416Bank2_9100,
- ARRAY_SIZE(ar5416Bank2_9100), 2);
- INIT_INI_ARRAY(&ah->iniBank3, ar5416Bank3_9100,
- ARRAY_SIZE(ar5416Bank3_9100), 3);
- INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6_9100,
- ARRAY_SIZE(ar5416Bank6_9100), 3);
- INIT_INI_ARRAY(&ah->iniBank6TPC, ar5416Bank6TPC_9100,
- ARRAY_SIZE(ar5416Bank6TPC_9100), 3);
- INIT_INI_ARRAY(&ah->iniBank7, ar5416Bank7_9100,
- ARRAY_SIZE(ar5416Bank7_9100), 2);
- INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9100,
- ARRAY_SIZE(ar5416Addac_9100), 2);
- } else {
- INIT_INI_ARRAY(&ah->iniModes, ar5416Modes,
- ARRAY_SIZE(ar5416Modes), 6);
- INIT_INI_ARRAY(&ah->iniCommon, ar5416Common,
- ARRAY_SIZE(ar5416Common), 2);
- INIT_INI_ARRAY(&ah->iniBank0, ar5416Bank0,
- ARRAY_SIZE(ar5416Bank0), 2);
- INIT_INI_ARRAY(&ah->iniBB_RfGain, ar5416BB_RfGain,
- ARRAY_SIZE(ar5416BB_RfGain), 3);
- INIT_INI_ARRAY(&ah->iniBank1, ar5416Bank1,
- ARRAY_SIZE(ar5416Bank1), 2);
- INIT_INI_ARRAY(&ah->iniBank2, ar5416Bank2,
- ARRAY_SIZE(ar5416Bank2), 2);
- INIT_INI_ARRAY(&ah->iniBank3, ar5416Bank3,
- ARRAY_SIZE(ar5416Bank3), 3);
- INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6,
- ARRAY_SIZE(ar5416Bank6), 3);
- INIT_INI_ARRAY(&ah->iniBank6TPC, ar5416Bank6TPC,
- ARRAY_SIZE(ar5416Bank6TPC), 3);
- INIT_INI_ARRAY(&ah->iniBank7, ar5416Bank7,
- ARRAY_SIZE(ar5416Bank7), 2);
- INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac,
- ARRAY_SIZE(ar5416Addac), 2);
- }
-}
-
-/* AR9003 2.0 - new INI format (pre, core, post arrays per subsystem) */
-static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
-{
- /* mac */
- INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
- INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
- ar9300_2p0_mac_core,
- ARRAY_SIZE(ar9300_2p0_mac_core), 2);
- INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
- ar9300_2p0_mac_postamble,
- ARRAY_SIZE(ar9300_2p0_mac_postamble), 5);
-
- /* bb */
- INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], NULL, 0, 0);
- INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
- ar9300_2p0_baseband_core,
- ARRAY_SIZE(ar9300_2p0_baseband_core), 2);
- INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
- ar9300_2p0_baseband_postamble,
- ARRAY_SIZE(ar9300_2p0_baseband_postamble), 5);
-
- /* radio */
- INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
- INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
- ar9300_2p0_radio_core,
- ARRAY_SIZE(ar9300_2p0_radio_core), 2);
- INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
- ar9300_2p0_radio_postamble,
- ARRAY_SIZE(ar9300_2p0_radio_postamble), 5);
-
- /* soc */
- INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
- ar9300_2p0_soc_preamble,
- ARRAY_SIZE(ar9300_2p0_soc_preamble), 2);
- INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
- INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST],
- ar9300_2p0_soc_postamble,
- ARRAY_SIZE(ar9300_2p0_soc_postamble), 5);
-
- /* rx/tx gain */
- INIT_INI_ARRAY(&ah->iniModesRxGain,
- ar9300Common_rx_gain_table_2p0,
- ARRAY_SIZE(ar9300Common_rx_gain_table_2p0), 2);
- INIT_INI_ARRAY(&ah->iniModesTxGain,
- ar9300Modes_lowest_ob_db_tx_gain_table_2p0,
- ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p0),
- 5);
-
- /* Load PCIE SERDES settings from INI */
-
- /* Awake Setting */
-
- INIT_INI_ARRAY(&ah->iniPcieSerdes,
- ar9300PciePhy_pll_on_clkreq_disable_L1_2p0,
- ARRAY_SIZE(ar9300PciePhy_pll_on_clkreq_disable_L1_2p0),
- 2);
-
- /* Sleep Setting */
-
- INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
- ar9300PciePhy_clkreq_enable_L1_2p0,
- ARRAY_SIZE(ar9300PciePhy_clkreq_enable_L1_2p0),
- 2);
-
- /* Fast clock modal settings */
- INIT_INI_ARRAY(&ah->iniModesAdditional,
- ar9300Modes_fast_clock_2p0,
- ARRAY_SIZE(ar9300Modes_fast_clock_2p0),
- 3);
-}
-
static void ath9k_hw_init_mode_gain_regs(struct ath_hw *ah)
{
if (AR_SREV_9287_11_OR_LATER(ah))
@@ -2212,140 +1915,6 @@ bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
}
EXPORT_SYMBOL(ath9k_hw_setpower);
-/*
- * Helper for ASPM support.
- *
- * Disable PLL when in L0s as well as receiver clock when in L1.
- * This power saving option must be enabled through the SerDes.
- *
- * Programming the SerDes must go through the same 288 bit serial shift
- * register as the other analog registers. Hence the 9 writes.
- */
-static void ar9002_hw_configpcipowersave(struct ath_hw *ah,
- int restore,
- int power_off)
-{
- u8 i;
- u32 val;
-
- if (ah->is_pciexpress != true)
- return;
-
- /* Do not touch SerDes registers */
- if (ah->config.pcie_powersave_enable == 2)
- return;
-
- /* Nothing to do on restore for 11N */
- if (!restore) {
- if (AR_SREV_9280_20_OR_LATER(ah)) {
- /*
- * AR9280 2.0 or later chips use SerDes values from the
- * initvals.h initialized depending on chipset during
- * __ath9k_hw_init()
- */
- for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) {
- REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0),
- INI_RA(&ah->iniPcieSerdes, i, 1));
- }
- } else if (AR_SREV_9280(ah) &&
- (ah->hw_version.macRev == AR_SREV_REVISION_9280_10)) {
- REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
-
- /* RX shut off when elecidle is asserted */
- REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560);
-
- /* Shut off CLKREQ active in L1 */
- if (ah->config.pcie_clock_req)
- REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc);
- else
- REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd);
-
- REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007);
-
- /* Load the new settings */
- REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
-
- } else {
- REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
-
- /* RX shut off when elecidle is asserted */
- REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
-
- /*
- * Ignore ah->ah_config.pcie_clock_req setting for
- * pre-AR9280 11n
- */
- REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
-
- REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
-
- /* Load the new settings */
- REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
- }
-
- udelay(1000);
-
- /* set bit 19 to allow forcing of pcie core into L1 state */
- REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
-
- /* Several PCIe massages to ensure proper behaviour */
- if (ah->config.pcie_waen) {
- val = ah->config.pcie_waen;
- if (!power_off)
- val &= (~AR_WA_D3_L1_DISABLE);
- } else {
- if (AR_SREV_9285(ah) || AR_SREV_9271(ah) ||
- AR_SREV_9287(ah)) {
- val = AR9285_WA_DEFAULT;
- if (!power_off)
- val &= (~AR_WA_D3_L1_DISABLE);
- } else if (AR_SREV_9280(ah)) {
- /*
- * On AR9280 chips bit 22 of 0x4004 needs to be
- * set otherwise card may disappear.
- */
- val = AR9280_WA_DEFAULT;
- if (!power_off)
- val &= (~AR_WA_D3_L1_DISABLE);
- } else
- val = AR_WA_DEFAULT;
- }
-
- REG_WRITE(ah, AR_WA, val);
- }
-
- if (power_off) {
- /*
- * Set PCIe workaround bits
- * bit 14 in WA register (disable L1) should only
- * be set when device enters D3 and be cleared
- * when device comes back to D0.
- */
- if (ah->config.pcie_waen) {
- if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
- REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE);
- } else {
- if (((AR_SREV_9285(ah) || AR_SREV_9271(ah) ||
- AR_SREV_9287(ah)) &&
- (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)) ||
- (AR_SREV_9280(ah) &&
- (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE))) {
- REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE);
- }
- }
- }
-}
-
/**********************/
/* Interrupt Handling */
/**********************/
@@ -2627,37 +2196,6 @@ enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints)
}
EXPORT_SYMBOL(ath9k_hw_set_interrupts);
-/*
- * Helper for ASPM support.
- *
- * Disable PLL when in L0s as well as receiver clock when in L1.
- * This power saving option must be enabled through the SerDes.
- *
- * Programming the SerDes must go through the same 288 bit serial shift
- * register as the other analog registers. Hence the 9 writes.
- */
-static void ar9003_hw_configpcipowersave(struct ath_hw *ah,
- int restore,
- int power_off)
-{
- if (ah->is_pciexpress != true)
- return;
-
- /* Do not touch SerDes registers */
- if (ah->config.pcie_powersave_enable == 2)
- return;
-
- /* Nothing to do on restore for 11N */
- if (!restore) {
- /* set bit 19 to allow forcing of pcie core into L1 state */
- REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
-
- /* Several PCIe massages to ensure proper behaviour */
- if (ah->config.pcie_waen)
- REG_WRITE(ah, AR_WA, ah->config.pcie_waen);
- }
-}
-
/*******************/
/* Beacon Handling */
/*******************/
@@ -3672,38 +3210,3 @@ void ath9k_hw_name(struct ath_hw *ah, char *hw_name, size_t len)
hw_name[used] = '\0';
}
EXPORT_SYMBOL(ath9k_hw_name);
-
-/* Sets up the AR5008/AR9001/AR9002 hardware familiy callbacks */
-static void ar9002_hw_attach_ops(struct ath_hw *ah)
-{
- struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
- struct ath_hw_ops *ops = ath9k_hw_ops(ah);
-
- priv_ops->init_mode_regs = ar9002_hw_init_mode_regs;
- priv_ops->macversion_supported = ar9002_hw_macversion_supported;
-
- ops->config_pci_powersave = ar9002_hw_configpcipowersave;
-
- ar5008_hw_attach_phy_ops(ah);
- if (AR_SREV_9280_10_OR_LATER(ah))
- ar9002_hw_attach_phy_ops(ah);
-
- ar9002_hw_attach_calib_ops(ah);
- ar9002_hw_attach_mac_ops(ah);
-}
-
-/* Sets up the AR9003 hardware familiy callbacks */
-static void ar9003_hw_attach_ops(struct ath_hw *ah)
-{
- struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
- struct ath_hw_ops *ops = ath9k_hw_ops(ah);
-
- priv_ops->init_mode_regs = ar9003_hw_init_mode_regs;
- priv_ops->macversion_supported = ar9003_hw_macversion_supported;
-
- ops->config_pci_powersave = ar9003_hw_configpcipowersave;
-
- ar9003_hw_attach_phy_ops(ah);
- ar9003_hw_attach_calib_ops(ah);
- ar9003_hw_attach_mac_ops(ah);
-}
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 8101ca4..1c6b07b 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2008-2009 Atheros Communications Inc.
+ * Copyright (c) 2008-2010 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -846,6 +846,9 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah);
void ar9002_hw_attach_calib_ops(struct ath_hw *ah);
void ar9003_hw_attach_calib_ops(struct ath_hw *ah);
+void ar9002_hw_attach_ops(struct ath_hw *ah);
+void ar9003_hw_attach_ops(struct ath_hw *ah);
+
#define ATH_PCIE_CAP_LINK_CTRL 0x70
#define ATH_PCIE_CAP_LINK_L0S 1
#define ATH_PCIE_CAP_LINK_L1 2
--
1.6.3.3
next prev parent reply other threads:[~2010-04-08 19:27 UTC|newest]
Thread overview: 120+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-08 19:25 [PATCH 000/102] ath9k: add AR9003 support Luis R. Rodriguez
2010-04-08 19:25 ` [PATCH 001/102] ath9k_hw: start building an abstraction layer for hardware routines Luis R. Rodriguez
2010-04-08 19:25 ` [PATCH 002/102] ath9k_hw: add silicon revision macros for AR9300 Luis R. Rodriguez
2010-04-08 20:57 ` Pavel Roskin
2010-04-08 19:25 ` [PATCH 003/102] ath9k_hw: add a macro for abstracting generic timer access Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 004/102] ath9k_hw: fix a missing hex prefix for a register mask Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 005/102] ath9k_hw: add simple register abstraction for some AR9300 registers Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 006/102] ath9k_hw: add support for GPIO differences on AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 007/102] ath9k_hw: AR9003 does not have AR_RC_AHB skip its setting Luis R. Rodriguez
2010-04-08 21:18 ` Pavel Roskin
2010-04-08 21:23 ` Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 008/102] ath9k_hw: remove wrapper ath9k_hw_write_regs() Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 009/102] ath9k_hw: Move some RF ops to the private callbacks Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 010/102] ath9k_hw: skip PLL initialization on AR9003 on Power-On-Reset Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 011/102] ath9k_hw: add some comments for ath9k_set_power_network_sleep() Luis R. Rodriguez
2010-04-09 20:29 ` Pavel Roskin
2010-04-08 19:26 ` [PATCH 012/102] ath9k_hw: add a private callback for PLL control computation Luis R. Rodriguez
2010-04-13 19:54 ` John W. Linville
2010-04-13 20:15 ` Felix Fietkau
2010-04-13 21:42 ` Luis R. Rodriguez
2010-04-13 23:38 ` John W. Linville
2010-04-13 23:43 ` Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 013/102] ath9k_hw: Add the PCI IDs for AR9300 and fill up the pci_id_tables Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 014/102] ath9k_hw: Add AR9003 PHY support Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 015/102] ath9k_hw: move init config and default after chip is up Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 016/102] ath9k_hw: add the AR9003 ar9003_hw_macversion_supported() Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 017/102] ath9k_hw: enable all ANI functionality for AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 018/102] ath9k_hw: Add hw cap flag for EDMA for the AR9003 family Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 019/102] ath9k_hw: Fill few hw cap for edma Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 020/102] ath9k_hw: Add abstraction for rx enable Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 021/102] ath9k_hw: Fill rx_enable() for the AR9003 hardware family Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 022/102] ath9k_hw: Add few routines for rx edma support Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 023/102] ath9k_hw: update the chip tests for AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 024/102] ath9k_hw: prevent reset control register zeroing on AR9003 reset Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 025/102] ath9k_hw: Add AR9003 PHY register definitions Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 026/102] ath9k_hw: add common channel select helpers for ar900[23] Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 027/102] ath9k_hw: Set the channel on AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 028/102] ath9k_hw: Implement PLL control " Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 029/102] ath9k_hw: Implement spur mitigation " Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 030/102] ath9k_hw: split initvals.h by hardware family Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 031/102] ath9k_hw: run Lindent on intivals Luis R. Rodriguez
2010-04-09 20:48 ` Pavel Roskin
2010-04-09 21:32 ` Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 032/102] ath9k_hw: add initvals for the AR9003 hardware family Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 033/102] ath9k_hw: add helpers for processing the AR9003 INI Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 034/102] ath9k_hw: Split off ANI control to the PHY ops Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 035/102] ath9k_hw: add all the AR9003 PHY callbacks Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 036/102] ath9k_hw: Define tx control struct for AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 037/102] ath9k_hw: Move code which populates ds_data to ath9k_hw Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 038/102] ath9k_hw: Add abstraction to set/get link pointer Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 039/102] ath9k: Use abstraction to get " Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 040/102] ath9k: Use memcpy in ath_clone_txbuf() Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 041/102] ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 042/102] ath9k: Make bf_desc of ath_buf opaque Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 043/102] ath9k: Add Rx EDMA support Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 044/102] ath9k_hw: Split out the function for reading the noise floor Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 045/102] ath9k_hw: Get rid of eep_map and reorganize the functions Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 046/102] ath9k_hw: add a helper for Power Amplifier calibration for AR9002 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 047/102] ath9k_hw: add a helper for the OLC tem compensation " Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 048/102] ath9k_hw: rename PA calib for AR9287 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 049/102] ath9k_hw: shift code for AR9280 OLC temp comp Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 050/102] ath9k_hw: move the AR9280 OLC temp comp to its own helper Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 051/102] ath9k_hw: simplify OLC temp compensation for AR9002 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 052/102] ath9k_hw: rename the PA calib routines to match their families Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 053/102] ath9k_hw: rename getNoiseFloorThresh() to ath9k_hw_loadnf() Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 054/102] ath9k_hw: move the cal AR9100 calibration settings Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 055/102] ath9k_hw: split calib code by hardware families Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 056/102] ath9k_hw: add the AR9003 ar9003_hw_init_cal callback Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 057/102] ath9k_hw: add the config_pci_powersave AR9003 callback Luis R. Rodriguez
2010-04-08 19:26 ` Luis R. Rodriguez [this message]
2010-04-08 19:26 ` [PATCH 059/102] ath9k_hw: move the cck channel 14 INI to the AR9002 hw code Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 060/102] ath9k_hw: move TX/RX gain INI stuff to its own hardware family code Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 061/102] ath9k_hw: Abstract the routine which returns interrupt status Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 062/102] ath9k_hw: Initialize interrupt mask for AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 063/102] ath9k_hw: abstract the AR_PHY_AGC_CONTROL register access Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 064/102] ath9k_hw: abstract loading noisefloor Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 065/102] ath9k_hw: fill in the callbacks for calibration for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 066/102] ath9k_hw: add a helper for changing the TX/RX masks Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 067/102] ath9k_hw: complete AR9003 calibration Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 068/102] ath9k_hw: rename eep_AR9287_ops to eep_ar9287_ops Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 069/102] ath9k_hw: restore mac address reading logic Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 070/102] ath9k_hw: Implement AR9003 eeprom callbacks Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 071/102] ath9k_hw: add OFDM spur mitigation for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 072/102] ath9k_hw: Fill get_isr() " Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 073/102] ath9k_hw: move AR9280 PCI EEPROM fix to ar9002_hw.c Luis R. Rodriguez
2010-04-09 21:04 ` Pavel Roskin
2010-04-09 21:13 ` Felix Fietkau
2010-04-08 19:27 ` [PATCH 074/102] ath9k_hw: simplify the AR9280 PCI EEPROM fix Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 075/102] ath9k_hw: move the RF claim stuff to AR9002 hardware family Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 076/102] ath9k_hw: Configure Tx interrupt mitigation timer Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 077/102] ath9k_hw: add the AR9300 SREV hw name print Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 078/102] ath9k_hw: add TX/RX gain register initialization for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 079/102] ath9k_hw: Update ath9k_hw_set_dma for AR9300 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 080/102] ath9k_hw: Handle big-endian access for AR9300 EEPROM reads Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 081/102] ath9k_hw: skip asynch fifo enablement to AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 082/102] ath9k_hw: skip WEP aggregation enable code for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 083/102] ath9k_hw: Fix internal regulator setting on AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 084/102] ath9k: Load SW filtered NF values and start NF cal during full reset for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 085/102] ath9k_hw: Define abstraction for tx desc access Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 086/102] ath9k_hw: Add function to configure tx status ring buffer Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 087/102] ath9k_hw: Fill descriptor abstrations for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 088/102] ath9k: add RXLP and RXHP to debugfs counters Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 089/102] ath9k_hw: enable CRC check of descriptors for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 090/102] ath9k_hw: set cwmin and cwmax to 0 for for AR9003 upon txq reset Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 091/102] ath9k_hw: move AR9002 mac ops to its own file Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 092/102] ath9k: Setup appropriate tx desc for regular dma and edma Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 093/102] ath9k: Initialize and configure tx status for EDMA Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 094/102] ath9k_hw: Compute pointer checksum over the link descriptor Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 095/102] ath9k: Add frame onto hw tx fifo for edma Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 096/102] mac80211: add LDPC control flag Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 097/102] ath9k_hw: add LDPC support for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 098/102] ath9k: add LDPC support Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 099/102] ath9k: Enable TXOK and TXERR interrupts for TX EDMA Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 100/102] ath9k: Handle Tx interrupt for EDMA Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 101/102] ath9k_hw: Abort rx if hw is not coming out of full sleep in reset Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 102/102] ath9k_hw: add the PCI ID for the first AR9300 device Luis R. Rodriguez
2010-04-09 21:12 ` [PATCH 000/102] ath9k: add AR9003 support Pavel Roskin
2010-04-12 19:44 ` Luis R. Rodriguez
2010-04-13 19:58 ` John W. Linville
2010-04-13 20:08 ` Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1270754858-26266-59-git-send-email-lrodriguez@atheros.com \
--to=lrodriguez@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.