All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org, Felix Fietkau <nbd@openwrt.org>
Subject: [PATCH 005/102] ath9k_hw: add simple register abstraction for some AR9300 registers
Date: Thu,  8 Apr 2010 15:26:01 -0400	[thread overview]
Message-ID: <1270754858-26266-6-git-send-email-lrodriguez@atheros.com> (raw)
In-Reply-To: <1270754858-26266-1-git-send-email-lrodriguez@atheros.com>

From: Felix Fietkau <nbd@openwrt.org>

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
 drivers/net/wireless/ath/ath9k/reg.h |   42 +++++++++++++++++-----------------
 1 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index c1e58da..d56b4ea 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -20,7 +20,7 @@
 #include "../reg.h"
 
 #define AR_CR                0x0008
-#define AR_CR_RXE            0x00000004
+#define AR_CR_RXE            (AR_SREV_9300_20_OR_LATER(ah) ? 0x0000000c : 0x00000004)
 #define AR_CR_RXD            0x00000020
 #define AR_CR_SWI            0x00000040
 
@@ -232,7 +232,6 @@
 #define AR_ISR_S5_TIMER_THRESH      0x0007FE00
 #define AR_ISR_S5_TIM_TIMER         0x00000010
 #define AR_ISR_S5_DTIM_TIMER        0x00000020
-#define AR_ISR_S5_S                 0x00d8
 #define AR_IMR_S5                   0x00b8
 #define AR_IMR_S5_TIM_TIMER         0x00000010
 #define AR_IMR_S5_DTIM_TIMER        0x00000020
@@ -240,7 +239,6 @@
 #define AR_ISR_S5_GENTIMER_TRIG_S   0
 #define AR_ISR_S5_GENTIMER_THRESH   0xFF800000
 #define AR_ISR_S5_GENTIMER_THRESH_S 16
-#define AR_ISR_S5_S                 0x00d8
 #define AR_IMR_S5_GENTIMER_TRIG     0x0000FF80
 #define AR_IMR_S5_GENTIMER_TRIG_S   0
 #define AR_IMR_S5_GENTIMER_THRESH   0xFF800000
@@ -332,10 +330,10 @@
 #define AR_ISR_S1_QCU_TXEOL    0x03FF0000
 #define AR_ISR_S1_QCU_TXEOL_S  16
 
-#define AR_ISR_S2_S           0x00cc
-#define AR_ISR_S3_S           0x00d0
-#define AR_ISR_S4_S           0x00d4
-#define AR_ISR_S5_S           0x00d8
+#define AR_ISR_S2_S           (AR_SREV_9300_20_OR_LATER(ah) ? 0x00d0 : 0x00cc)
+#define AR_ISR_S3_S           (AR_SREV_9300_20_OR_LATER(ah) ? 0x00d4 : 0x00d0)
+#define AR_ISR_S4_S           (AR_SREV_9300_20_OR_LATER(ah) ? 0x00d8 : 0x00d4)
+#define AR_ISR_S5_S           (AR_SREV_9300_20_OR_LATER(ah) ? 0x00dc : 0x00d8)
 #define AR_DMADBG_0           0x00e0
 #define AR_DMADBG_1           0x00e4
 #define AR_DMADBG_2           0x00e8
@@ -968,19 +966,21 @@ enum {
 #define AR9287_GPIO_IN_VAL_S                     11
 #define AR9271_GPIO_IN_VAL                       0xFFFF0000
 #define AR9271_GPIO_IN_VAL_S                     16
+#define AR9300_GPIO_IN_VAL                       0x0001FFFF
+#define AR9300_GPIO_IN_VAL_S                     0
 
-#define AR_GPIO_OE_OUT                           0x404c
+#define AR_GPIO_OE_OUT                           (AR_SREV_9300_20_OR_LATER(ah) ? 0x4050 : 0x404c)
 #define AR_GPIO_OE_OUT_DRV                       0x3
 #define AR_GPIO_OE_OUT_DRV_NO                    0x0
 #define AR_GPIO_OE_OUT_DRV_LOW                   0x1
 #define AR_GPIO_OE_OUT_DRV_HI                    0x2
 #define AR_GPIO_OE_OUT_DRV_ALL                   0x3
 
-#define AR_GPIO_INTR_POL                         0x4050
-#define AR_GPIO_INTR_POL_VAL                     0x00001FFF
+#define AR_GPIO_INTR_POL                         (AR_SREV_9300_20_OR_LATER(ah) ? 0x4058 : 0x4050)
+#define AR_GPIO_INTR_POL_VAL                     0x0001FFFF
 #define AR_GPIO_INTR_POL_VAL_S                   0
 
-#define AR_GPIO_INPUT_EN_VAL                     0x4054
+#define AR_GPIO_INPUT_EN_VAL                     (AR_SREV_9300_20_OR_LATER(ah) ? 0x405c : 0x4054)
 #define AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_DEF     0x00000004
 #define AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_S       2
 #define AR_GPIO_INPUT_EN_VAL_BT_FREQUENCY_DEF    0x00000008
@@ -998,13 +998,13 @@ enum {
 #define AR_GPIO_RTC_RESET_OVERRIDE_ENABLE        0x00010000
 #define AR_GPIO_JTAG_DISABLE                     0x00020000
 
-#define AR_GPIO_INPUT_MUX1                       0x4058
+#define AR_GPIO_INPUT_MUX1                       (AR_SREV_9300_20_OR_LATER(ah) ? 0x4060 : 0x4058)
 #define AR_GPIO_INPUT_MUX1_BT_ACTIVE             0x000f0000
 #define AR_GPIO_INPUT_MUX1_BT_ACTIVE_S           16
 #define AR_GPIO_INPUT_MUX1_BT_PRIORITY           0x00000f00
 #define AR_GPIO_INPUT_MUX1_BT_PRIORITY_S         8
 
-#define AR_GPIO_INPUT_MUX2                       0x405c
+#define AR_GPIO_INPUT_MUX2                       (AR_SREV_9300_20_OR_LATER(ah) ? 0x4064 : 0x405c)
 #define AR_GPIO_INPUT_MUX2_CLK25                 0x0000000f
 #define AR_GPIO_INPUT_MUX2_CLK25_S               0
 #define AR_GPIO_INPUT_MUX2_RFSILENT              0x000000f0
@@ -1012,13 +1012,13 @@ enum {
 #define AR_GPIO_INPUT_MUX2_RTC_RESET             0x00000f00
 #define AR_GPIO_INPUT_MUX2_RTC_RESET_S           8
 
-#define AR_GPIO_OUTPUT_MUX1                      0x4060
-#define AR_GPIO_OUTPUT_MUX2                      0x4064
-#define AR_GPIO_OUTPUT_MUX3                      0x4068
+#define AR_GPIO_OUTPUT_MUX1                      (AR_SREV_9300_20_OR_LATER(ah) ? 0x4068 : 0x4060)
+#define AR_GPIO_OUTPUT_MUX2                      (AR_SREV_9300_20_OR_LATER(ah) ? 0x406c : 0x4064)
+#define AR_GPIO_OUTPUT_MUX3                      (AR_SREV_9300_20_OR_LATER(ah) ? 0x4070 : 0x4068)
 
-#define AR_INPUT_STATE                           0x406c
+#define AR_INPUT_STATE                           (AR_SREV_9300_20_OR_LATER(ah) ? 0x4074 : 0x406c)
 
-#define AR_EEPROM_STATUS_DATA                    0x407c
+#define AR_EEPROM_STATUS_DATA                    (AR_SREV_9300_20_OR_LATER(ah) ? 0x4084 : 0x407c)
 #define AR_EEPROM_STATUS_DATA_VAL                0x0000ffff
 #define AR_EEPROM_STATUS_DATA_VAL_S              0
 #define AR_EEPROM_STATUS_DATA_BUSY               0x00010000
@@ -1026,11 +1026,11 @@ enum {
 #define AR_EEPROM_STATUS_DATA_PROT_ACCESS        0x00040000
 #define AR_EEPROM_STATUS_DATA_ABSENT_ACCESS      0x00080000
 
-#define AR_OBS                  0x4080
+#define AR_OBS                  (AR_SREV_9300_20_OR_LATER(ah) ? 0x4088 : 0x4080)
 
-#define AR_GPIO_PDPU                             0x4088
+#define AR_GPIO_PDPU                             (AR_SREV_9300_20_OR_LATER(ah) ? 0x4090 : 0x4088)
 
-#define AR_PCIE_MSI                              0x4094
+#define AR_PCIE_MSI                              (AR_SREV_9300_20_OR_LATER(ah) ? 0x40a4 : 0x4094)
 #define AR_PCIE_MSI_ENABLE                       0x00000001
 
 
-- 
1.6.3.3


  parent reply	other threads:[~2010-04-08 19:27 UTC|newest]

Thread overview: 120+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-04-08 19:25 [PATCH 000/102] ath9k: add AR9003 support Luis R. Rodriguez
2010-04-08 19:25 ` [PATCH 001/102] ath9k_hw: start building an abstraction layer for hardware routines Luis R. Rodriguez
2010-04-08 19:25 ` [PATCH 002/102] ath9k_hw: add silicon revision macros for AR9300 Luis R. Rodriguez
2010-04-08 20:57   ` Pavel Roskin
2010-04-08 19:25 ` [PATCH 003/102] ath9k_hw: add a macro for abstracting generic timer access Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 004/102] ath9k_hw: fix a missing hex prefix for a register mask Luis R. Rodriguez
2010-04-08 19:26 ` Luis R. Rodriguez [this message]
2010-04-08 19:26 ` [PATCH 006/102] ath9k_hw: add support for GPIO differences on AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 007/102] ath9k_hw: AR9003 does not have AR_RC_AHB skip its setting Luis R. Rodriguez
2010-04-08 21:18   ` Pavel Roskin
2010-04-08 21:23     ` Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 008/102] ath9k_hw: remove wrapper ath9k_hw_write_regs() Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 009/102] ath9k_hw: Move some RF ops to the private callbacks Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 010/102] ath9k_hw: skip PLL initialization on AR9003 on Power-On-Reset Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 011/102] ath9k_hw: add some comments for ath9k_set_power_network_sleep() Luis R. Rodriguez
2010-04-09 20:29   ` Pavel Roskin
2010-04-08 19:26 ` [PATCH 012/102] ath9k_hw: add a private callback for PLL control computation Luis R. Rodriguez
2010-04-13 19:54   ` John W. Linville
2010-04-13 20:15     ` Felix Fietkau
2010-04-13 21:42       ` Luis R. Rodriguez
2010-04-13 23:38         ` John W. Linville
2010-04-13 23:43           ` Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 013/102] ath9k_hw: Add the PCI IDs for AR9300 and fill up the pci_id_tables Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 014/102] ath9k_hw: Add AR9003 PHY support Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 015/102] ath9k_hw: move init config and default after chip is up Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 016/102] ath9k_hw: add the AR9003 ar9003_hw_macversion_supported() Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 017/102] ath9k_hw: enable all ANI functionality for AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 018/102] ath9k_hw: Add hw cap flag for EDMA for the AR9003 family Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 019/102] ath9k_hw: Fill few hw cap for edma Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 020/102] ath9k_hw: Add abstraction for rx enable Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 021/102] ath9k_hw: Fill rx_enable() for the AR9003 hardware family Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 022/102] ath9k_hw: Add few routines for rx edma support Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 023/102] ath9k_hw: update the chip tests for AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 024/102] ath9k_hw: prevent reset control register zeroing on AR9003 reset Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 025/102] ath9k_hw: Add AR9003 PHY register definitions Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 026/102] ath9k_hw: add common channel select helpers for ar900[23] Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 027/102] ath9k_hw: Set the channel on AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 028/102] ath9k_hw: Implement PLL control " Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 029/102] ath9k_hw: Implement spur mitigation " Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 030/102] ath9k_hw: split initvals.h by hardware family Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 031/102] ath9k_hw: run Lindent on intivals Luis R. Rodriguez
2010-04-09 20:48   ` Pavel Roskin
2010-04-09 21:32     ` Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 032/102] ath9k_hw: add initvals for the AR9003 hardware family Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 033/102] ath9k_hw: add helpers for processing the AR9003 INI Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 034/102] ath9k_hw: Split off ANI control to the PHY ops Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 035/102] ath9k_hw: add all the AR9003 PHY callbacks Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 036/102] ath9k_hw: Define tx control struct for AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 037/102] ath9k_hw: Move code which populates ds_data to ath9k_hw Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 038/102] ath9k_hw: Add abstraction to set/get link pointer Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 039/102] ath9k: Use abstraction to get " Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 040/102] ath9k: Use memcpy in ath_clone_txbuf() Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 041/102] ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 042/102] ath9k: Make bf_desc of ath_buf opaque Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 043/102] ath9k: Add Rx EDMA support Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 044/102] ath9k_hw: Split out the function for reading the noise floor Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 045/102] ath9k_hw: Get rid of eep_map and reorganize the functions Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 046/102] ath9k_hw: add a helper for Power Amplifier calibration for AR9002 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 047/102] ath9k_hw: add a helper for the OLC tem compensation " Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 048/102] ath9k_hw: rename PA calib for AR9287 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 049/102] ath9k_hw: shift code for AR9280 OLC temp comp Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 050/102] ath9k_hw: move the AR9280 OLC temp comp to its own helper Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 051/102] ath9k_hw: simplify OLC temp compensation for AR9002 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 052/102] ath9k_hw: rename the PA calib routines to match their families Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 053/102] ath9k_hw: rename getNoiseFloorThresh() to ath9k_hw_loadnf() Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 054/102] ath9k_hw: move the cal AR9100 calibration settings Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 055/102] ath9k_hw: split calib code by hardware families Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 056/102] ath9k_hw: add the AR9003 ar9003_hw_init_cal callback Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 057/102] ath9k_hw: add the config_pci_powersave AR9003 callback Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 058/102] ath9k_hw: split the generic hardware code by hardware family Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 059/102] ath9k_hw: move the cck channel 14 INI to the AR9002 hw code Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 060/102] ath9k_hw: move TX/RX gain INI stuff to its own hardware family code Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 061/102] ath9k_hw: Abstract the routine which returns interrupt status Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 062/102] ath9k_hw: Initialize interrupt mask for AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 063/102] ath9k_hw: abstract the AR_PHY_AGC_CONTROL register access Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 064/102] ath9k_hw: abstract loading noisefloor Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 065/102] ath9k_hw: fill in the callbacks for calibration for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 066/102] ath9k_hw: add a helper for changing the TX/RX masks Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 067/102] ath9k_hw: complete AR9003 calibration Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 068/102] ath9k_hw: rename eep_AR9287_ops to eep_ar9287_ops Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 069/102] ath9k_hw: restore mac address reading logic Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 070/102] ath9k_hw: Implement AR9003 eeprom callbacks Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 071/102] ath9k_hw: add OFDM spur mitigation for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 072/102] ath9k_hw: Fill get_isr() " Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 073/102] ath9k_hw: move AR9280 PCI EEPROM fix to ar9002_hw.c Luis R. Rodriguez
2010-04-09 21:04   ` Pavel Roskin
2010-04-09 21:13     ` Felix Fietkau
2010-04-08 19:27 ` [PATCH 074/102] ath9k_hw: simplify the AR9280 PCI EEPROM fix Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 075/102] ath9k_hw: move the RF claim stuff to AR9002 hardware family Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 076/102] ath9k_hw: Configure Tx interrupt mitigation timer Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 077/102] ath9k_hw: add the AR9300 SREV hw name print Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 078/102] ath9k_hw: add TX/RX gain register initialization for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 079/102] ath9k_hw: Update ath9k_hw_set_dma for AR9300 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 080/102] ath9k_hw: Handle big-endian access for AR9300 EEPROM reads Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 081/102] ath9k_hw: skip asynch fifo enablement to AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 082/102] ath9k_hw: skip WEP aggregation enable code for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 083/102] ath9k_hw: Fix internal regulator setting on AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 084/102] ath9k: Load SW filtered NF values and start NF cal during full reset for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 085/102] ath9k_hw: Define abstraction for tx desc access Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 086/102] ath9k_hw: Add function to configure tx status ring buffer Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 087/102] ath9k_hw: Fill descriptor abstrations for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 088/102] ath9k: add RXLP and RXHP to debugfs counters Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 089/102] ath9k_hw: enable CRC check of descriptors for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 090/102] ath9k_hw: set cwmin and cwmax to 0 for for AR9003 upon txq reset Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 091/102] ath9k_hw: move AR9002 mac ops to its own file Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 092/102] ath9k: Setup appropriate tx desc for regular dma and edma Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 093/102] ath9k: Initialize and configure tx status for EDMA Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 094/102] ath9k_hw: Compute pointer checksum over the link descriptor Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 095/102] ath9k: Add frame onto hw tx fifo for edma Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 096/102] mac80211: add LDPC control flag Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 097/102] ath9k_hw: add LDPC support for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 098/102] ath9k: add LDPC support Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 099/102] ath9k: Enable TXOK and TXERR interrupts for TX EDMA Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 100/102] ath9k: Handle Tx interrupt for EDMA Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 101/102] ath9k_hw: Abort rx if hw is not coming out of full sleep in reset Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 102/102] ath9k_hw: add the PCI ID for the first AR9300 device Luis R. Rodriguez
2010-04-09 21:12 ` [PATCH 000/102] ath9k: add AR9003 support Pavel Roskin
2010-04-12 19:44   ` Luis R. Rodriguez
2010-04-13 19:58 ` John W. Linville
2010-04-13 20:08   ` Felix Fietkau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1270754858-26266-6-git-send-email-lrodriguez@atheros.com \
    --to=lrodriguez@atheros.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=nbd@openwrt.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.