All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jimmy Rubin <jimmy.rubin@stericsson.com>
To: <linux-fbdev@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-media@vger.kernel.org>
Cc: Linus Walleij <linus.walleij@stericsson.com>,
	Dan Johansson <dan.johansson@stericsson.com>,
	Jimmy Rubin <jimmy.rubin@stericsson.com>
Subject: [PATCH 00/10] MCDE: Add frame buffer device driver
Date: Wed, 10 Nov 2010 13:04:03 +0100	[thread overview]
Message-ID: <1289390653-6111-1-git-send-email-jimmy.rubin@stericsson.com> (raw)

These set of patches contains a display sub system framework (DSS) which is used to
implement the frame buffer device interface and a display device
framework that is used to add support for different type of displays
such as LCD, HDMI and so on.

The current implementation supports DSI command mode displays.

Below is a short summary of the files in this patchset:

mcde_fb.c
Implements the frame buffer device driver.

mcde_dss.c
Contains the implementation of the display sub system framework (DSS).
This API is used by the frame buffer device driver.

mcde_display.c
Contains default implementations of the functions in the display driver
API. A display driver may override the necessary functions to function
properly. A simple display driver is implemented in display-generic_dsi.c.

display-generic_dsi.c
Sample driver for a DSI command mode display.

mcde_bus.c
Implementation of the display bus. A display device is probed when both
the display driver and display configuration have been registered with
the display bus.

mcde_hw.c
Hardware abstraction layer of MCDE. All code that communicates directly
with the hardware resides in this file.

board-mop500-mcde.c
The configuration of the display and the frame buffer device is handled
in this file

NOTE: These set of patches replaces the patches already sent out for review.

RFC:[PATCH 1/2] Video: Add support for MCDE frame buffer driver
RFC:[PATCH 2/2] Ux500: Add support for MCDE frame buffer driver  

The old patchset was to large to be handled by the mailing lists.

Jimmy Rubin (10):
  MCDE: Add hardware abstraction layer
  MCDE: Add configuration registers
  MCDE: Add pixel processing registers
  MCDE: Add formatter registers
  MCDE: Add dsi link registers
  MCDE: Add generic display
  MCDE: Add display subsystem framework
  MCDE: Add frame buffer device driver
  MCDE: Add build files and bus
  ux500: MCDE: Add platform specific data

 arch/arm/mach-ux500/Kconfig                    |    8 +
 arch/arm/mach-ux500/Makefile                   |    1 +
 arch/arm/mach-ux500/board-mop500-mcde.c        |  209 ++
 arch/arm/mach-ux500/board-mop500-regulators.c  |   28 +
 arch/arm/mach-ux500/board-mop500.c             |    3 +
 arch/arm/mach-ux500/devices-db8500.c           |   68 +
 arch/arm/mach-ux500/include/mach/db8500-regs.h |    7 +
 arch/arm/mach-ux500/include/mach/devices.h     |    1 +
 arch/arm/mach-ux500/include/mach/prcmu-regs.h  |    1 +
 arch/arm/mach-ux500/include/mach/prcmu.h       |    3 +
 arch/arm/mach-ux500/prcmu.c                    |  129 ++
 drivers/video/Kconfig                          |    2 +
 drivers/video/Makefile                         |    1 +
 drivers/video/mcde/Kconfig                     |   39 +
 drivers/video/mcde/Makefile                    |   12 +
 drivers/video/mcde/display-generic_dsi.c       |  152 ++
 drivers/video/mcde/dsi_link_config.h           | 1486 ++++++++++++++
 drivers/video/mcde/mcde_bus.c                  |  259 +++
 drivers/video/mcde/mcde_config.h               | 2156 ++++++++++++++++++++
 drivers/video/mcde/mcde_display.c              |  427 ++++
 drivers/video/mcde/mcde_dss.c                  |  353 ++++
 drivers/video/mcde/mcde_fb.c                   |  697 +++++++
 drivers/video/mcde/mcde_formatter.h            |  782 ++++++++
 drivers/video/mcde/mcde_hw.c                   | 2528 ++++++++++++++++++++++++
 drivers/video/mcde/mcde_mod.c                  |   67 +
 drivers/video/mcde/mcde_pixelprocess.h         | 1137 +++++++++++
 include/video/mcde/mcde.h                      |  387 ++++
 include/video/mcde/mcde_display-generic_dsi.h  |   34 +
 include/video/mcde/mcde_display.h              |  139 ++
 include/video/mcde/mcde_dss.h                  |   78 +
 include/video/mcde/mcde_fb.h                   |   54 +
 31 files changed, 11248 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-ux500/board-mop500-mcde.c
 create mode 100644 drivers/video/mcde/Kconfig
 create mode 100644 drivers/video/mcde/Makefile
 create mode 100644 drivers/video/mcde/display-generic_dsi.c
 create mode 100644 drivers/video/mcde/dsi_link_config.h
 create mode 100644 drivers/video/mcde/mcde_bus.c
 create mode 100644 drivers/video/mcde/mcde_config.h
 create mode 100644 drivers/video/mcde/mcde_display.c
 create mode 100644 drivers/video/mcde/mcde_dss.c
 create mode 100644 drivers/video/mcde/mcde_fb.c
 create mode 100644 drivers/video/mcde/mcde_formatter.h
 create mode 100644 drivers/video/mcde/mcde_hw.c
 create mode 100644 drivers/video/mcde/mcde_mod.c
 create mode 100644 drivers/video/mcde/mcde_pixelprocess.h
 create mode 100644 include/video/mcde/mcde.h
 create mode 100644 include/video/mcde/mcde_display-generic_dsi.h
 create mode 100644 include/video/mcde/mcde_display.h
 create mode 100644 include/video/mcde/mcde_dss.h
 create mode 100644 include/video/mcde/mcde_fb.h


WARNING: multiple messages have this Message-ID (diff)
From: Jimmy Rubin <jimmy.rubin@stericsson.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/10] MCDE: Add frame buffer device driver
Date: Wed, 10 Nov 2010 12:04:03 +0000	[thread overview]
Message-ID: <1289390653-6111-1-git-send-email-jimmy.rubin@stericsson.com> (raw)

These set of patches contains a display sub system framework (DSS) which is used to
implement the frame buffer device interface and a display device
framework that is used to add support for different type of displays
such as LCD, HDMI and so on.

The current implementation supports DSI command mode displays.

Below is a short summary of the files in this patchset:

mcde_fb.c
Implements the frame buffer device driver.

mcde_dss.c
Contains the implementation of the display sub system framework (DSS).
This API is used by the frame buffer device driver.

mcde_display.c
Contains default implementations of the functions in the display driver
API. A display driver may override the necessary functions to function
properly. A simple display driver is implemented in display-generic_dsi.c.

display-generic_dsi.c
Sample driver for a DSI command mode display.

mcde_bus.c
Implementation of the display bus. A display device is probed when both
the display driver and display configuration have been registered with
the display bus.

mcde_hw.c
Hardware abstraction layer of MCDE. All code that communicates directly
with the hardware resides in this file.

board-mop500-mcde.c
The configuration of the display and the frame buffer device is handled
in this file

NOTE: These set of patches replaces the patches already sent out for review.

RFC:[PATCH 1/2] Video: Add support for MCDE frame buffer driver
RFC:[PATCH 2/2] Ux500: Add support for MCDE frame buffer driver  

The old patchset was to large to be handled by the mailing lists.

Jimmy Rubin (10):
  MCDE: Add hardware abstraction layer
  MCDE: Add configuration registers
  MCDE: Add pixel processing registers
  MCDE: Add formatter registers
  MCDE: Add dsi link registers
  MCDE: Add generic display
  MCDE: Add display subsystem framework
  MCDE: Add frame buffer device driver
  MCDE: Add build files and bus
  ux500: MCDE: Add platform specific data

 arch/arm/mach-ux500/Kconfig                    |    8 +
 arch/arm/mach-ux500/Makefile                   |    1 +
 arch/arm/mach-ux500/board-mop500-mcde.c        |  209 ++
 arch/arm/mach-ux500/board-mop500-regulators.c  |   28 +
 arch/arm/mach-ux500/board-mop500.c             |    3 +
 arch/arm/mach-ux500/devices-db8500.c           |   68 +
 arch/arm/mach-ux500/include/mach/db8500-regs.h |    7 +
 arch/arm/mach-ux500/include/mach/devices.h     |    1 +
 arch/arm/mach-ux500/include/mach/prcmu-regs.h  |    1 +
 arch/arm/mach-ux500/include/mach/prcmu.h       |    3 +
 arch/arm/mach-ux500/prcmu.c                    |  129 ++
 drivers/video/Kconfig                          |    2 +
 drivers/video/Makefile                         |    1 +
 drivers/video/mcde/Kconfig                     |   39 +
 drivers/video/mcde/Makefile                    |   12 +
 drivers/video/mcde/display-generic_dsi.c       |  152 ++
 drivers/video/mcde/dsi_link_config.h           | 1486 ++++++++++++++
 drivers/video/mcde/mcde_bus.c                  |  259 +++
 drivers/video/mcde/mcde_config.h               | 2156 ++++++++++++++++++++
 drivers/video/mcde/mcde_display.c              |  427 ++++
 drivers/video/mcde/mcde_dss.c                  |  353 ++++
 drivers/video/mcde/mcde_fb.c                   |  697 +++++++
 drivers/video/mcde/mcde_formatter.h            |  782 ++++++++
 drivers/video/mcde/mcde_hw.c                   | 2528 ++++++++++++++++++++++++
 drivers/video/mcde/mcde_mod.c                  |   67 +
 drivers/video/mcde/mcde_pixelprocess.h         | 1137 +++++++++++
 include/video/mcde/mcde.h                      |  387 ++++
 include/video/mcde/mcde_display-generic_dsi.h  |   34 +
 include/video/mcde/mcde_display.h              |  139 ++
 include/video/mcde/mcde_dss.h                  |   78 +
 include/video/mcde/mcde_fb.h                   |   54 +
 31 files changed, 11248 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-ux500/board-mop500-mcde.c
 create mode 100644 drivers/video/mcde/Kconfig
 create mode 100644 drivers/video/mcde/Makefile
 create mode 100644 drivers/video/mcde/display-generic_dsi.c
 create mode 100644 drivers/video/mcde/dsi_link_config.h
 create mode 100644 drivers/video/mcde/mcde_bus.c
 create mode 100644 drivers/video/mcde/mcde_config.h
 create mode 100644 drivers/video/mcde/mcde_display.c
 create mode 100644 drivers/video/mcde/mcde_dss.c
 create mode 100644 drivers/video/mcde/mcde_fb.c
 create mode 100644 drivers/video/mcde/mcde_formatter.h
 create mode 100644 drivers/video/mcde/mcde_hw.c
 create mode 100644 drivers/video/mcde/mcde_mod.c
 create mode 100644 drivers/video/mcde/mcde_pixelprocess.h
 create mode 100644 include/video/mcde/mcde.h
 create mode 100644 include/video/mcde/mcde_display-generic_dsi.h
 create mode 100644 include/video/mcde/mcde_display.h
 create mode 100644 include/video/mcde/mcde_dss.h
 create mode 100644 include/video/mcde/mcde_fb.h


WARNING: multiple messages have this Message-ID (diff)
From: jimmy.rubin@stericsson.com (Jimmy Rubin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/10] MCDE: Add frame buffer device driver
Date: Wed, 10 Nov 2010 13:04:03 +0100	[thread overview]
Message-ID: <1289390653-6111-1-git-send-email-jimmy.rubin@stericsson.com> (raw)

These set of patches contains a display sub system framework (DSS) which is used to
implement the frame buffer device interface and a display device
framework that is used to add support for different type of displays
such as LCD, HDMI and so on.

The current implementation supports DSI command mode displays.

Below is a short summary of the files in this patchset:

mcde_fb.c
Implements the frame buffer device driver.

mcde_dss.c
Contains the implementation of the display sub system framework (DSS).
This API is used by the frame buffer device driver.

mcde_display.c
Contains default implementations of the functions in the display driver
API. A display driver may override the necessary functions to function
properly. A simple display driver is implemented in display-generic_dsi.c.

display-generic_dsi.c
Sample driver for a DSI command mode display.

mcde_bus.c
Implementation of the display bus. A display device is probed when both
the display driver and display configuration have been registered with
the display bus.

mcde_hw.c
Hardware abstraction layer of MCDE. All code that communicates directly
with the hardware resides in this file.

board-mop500-mcde.c
The configuration of the display and the frame buffer device is handled
in this file

NOTE: These set of patches replaces the patches already sent out for review.

RFC:[PATCH 1/2] Video: Add support for MCDE frame buffer driver
RFC:[PATCH 2/2] Ux500: Add support for MCDE frame buffer driver  

The old patchset was to large to be handled by the mailing lists.

Jimmy Rubin (10):
  MCDE: Add hardware abstraction layer
  MCDE: Add configuration registers
  MCDE: Add pixel processing registers
  MCDE: Add formatter registers
  MCDE: Add dsi link registers
  MCDE: Add generic display
  MCDE: Add display subsystem framework
  MCDE: Add frame buffer device driver
  MCDE: Add build files and bus
  ux500: MCDE: Add platform specific data

 arch/arm/mach-ux500/Kconfig                    |    8 +
 arch/arm/mach-ux500/Makefile                   |    1 +
 arch/arm/mach-ux500/board-mop500-mcde.c        |  209 ++
 arch/arm/mach-ux500/board-mop500-regulators.c  |   28 +
 arch/arm/mach-ux500/board-mop500.c             |    3 +
 arch/arm/mach-ux500/devices-db8500.c           |   68 +
 arch/arm/mach-ux500/include/mach/db8500-regs.h |    7 +
 arch/arm/mach-ux500/include/mach/devices.h     |    1 +
 arch/arm/mach-ux500/include/mach/prcmu-regs.h  |    1 +
 arch/arm/mach-ux500/include/mach/prcmu.h       |    3 +
 arch/arm/mach-ux500/prcmu.c                    |  129 ++
 drivers/video/Kconfig                          |    2 +
 drivers/video/Makefile                         |    1 +
 drivers/video/mcde/Kconfig                     |   39 +
 drivers/video/mcde/Makefile                    |   12 +
 drivers/video/mcde/display-generic_dsi.c       |  152 ++
 drivers/video/mcde/dsi_link_config.h           | 1486 ++++++++++++++
 drivers/video/mcde/mcde_bus.c                  |  259 +++
 drivers/video/mcde/mcde_config.h               | 2156 ++++++++++++++++++++
 drivers/video/mcde/mcde_display.c              |  427 ++++
 drivers/video/mcde/mcde_dss.c                  |  353 ++++
 drivers/video/mcde/mcde_fb.c                   |  697 +++++++
 drivers/video/mcde/mcde_formatter.h            |  782 ++++++++
 drivers/video/mcde/mcde_hw.c                   | 2528 ++++++++++++++++++++++++
 drivers/video/mcde/mcde_mod.c                  |   67 +
 drivers/video/mcde/mcde_pixelprocess.h         | 1137 +++++++++++
 include/video/mcde/mcde.h                      |  387 ++++
 include/video/mcde/mcde_display-generic_dsi.h  |   34 +
 include/video/mcde/mcde_display.h              |  139 ++
 include/video/mcde/mcde_dss.h                  |   78 +
 include/video/mcde/mcde_fb.h                   |   54 +
 31 files changed, 11248 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-ux500/board-mop500-mcde.c
 create mode 100644 drivers/video/mcde/Kconfig
 create mode 100644 drivers/video/mcde/Makefile
 create mode 100644 drivers/video/mcde/display-generic_dsi.c
 create mode 100644 drivers/video/mcde/dsi_link_config.h
 create mode 100644 drivers/video/mcde/mcde_bus.c
 create mode 100644 drivers/video/mcde/mcde_config.h
 create mode 100644 drivers/video/mcde/mcde_display.c
 create mode 100644 drivers/video/mcde/mcde_dss.c
 create mode 100644 drivers/video/mcde/mcde_fb.c
 create mode 100644 drivers/video/mcde/mcde_formatter.h
 create mode 100644 drivers/video/mcde/mcde_hw.c
 create mode 100644 drivers/video/mcde/mcde_mod.c
 create mode 100644 drivers/video/mcde/mcde_pixelprocess.h
 create mode 100644 include/video/mcde/mcde.h
 create mode 100644 include/video/mcde/mcde_display-generic_dsi.h
 create mode 100644 include/video/mcde/mcde_display.h
 create mode 100644 include/video/mcde/mcde_dss.h
 create mode 100644 include/video/mcde/mcde_fb.h

             reply	other threads:[~2010-11-10 12:26 UTC|newest]

Thread overview: 130+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-10 12:04 Jimmy Rubin [this message]
2010-11-10 12:04 ` [PATCH 00/10] MCDE: Add frame buffer device driver Jimmy Rubin
2010-11-10 12:04 ` Jimmy Rubin
2010-11-10 12:04 ` [PATCH 01/10] MCDE: Add hardware abstraction layer Jimmy Rubin
2010-11-10 12:04   ` Jimmy Rubin
2010-11-10 12:04   ` Jimmy Rubin
2010-11-10 12:04   ` [PATCH 02/10] MCDE: Add configuration registers Jimmy Rubin
2010-11-10 12:04     ` Jimmy Rubin
2010-11-10 12:04     ` Jimmy Rubin
2010-11-10 12:04     ` [PATCH 03/10] MCDE: Add pixel processing registers Jimmy Rubin
2010-11-10 12:04       ` Jimmy Rubin
2010-11-10 12:04       ` Jimmy Rubin
2010-11-10 12:04       ` [PATCH 04/10] MCDE: Add formatter registers Jimmy Rubin
2010-11-10 12:04         ` Jimmy Rubin
2010-11-10 12:04         ` Jimmy Rubin
2010-11-10 12:04         ` [PATCH 05/10] MCDE: Add dsi link registers Jimmy Rubin
2010-11-10 12:04           ` Jimmy Rubin
2010-11-10 12:04           ` Jimmy Rubin
2010-11-10 12:04           ` [PATCH 06/10] MCDE: Add generic display Jimmy Rubin
2010-11-10 12:04             ` Jimmy Rubin
2010-11-10 12:04             ` Jimmy Rubin
2010-11-10 12:04             ` [PATCH 07/10] MCDE: Add display subsystem framework Jimmy Rubin
2010-11-10 12:04               ` Jimmy Rubin
2010-11-10 12:04               ` Jimmy Rubin
2010-11-10 12:04               ` [PATCH 08/10] MCDE: Add frame buffer device Jimmy Rubin
2010-11-10 12:04                 ` Jimmy Rubin
2010-11-10 12:04                 ` Jimmy Rubin
2010-11-10 12:04                 ` [PATCH 09/10] MCDE: Add build files and bus Jimmy Rubin
2010-11-10 12:04                   ` Jimmy Rubin
2010-11-10 12:04                   ` Jimmy Rubin
2010-11-10 12:04                   ` [PATCH 10/10] ux500: MCDE: Add platform specific data Jimmy Rubin
2010-11-10 12:04                     ` Jimmy Rubin
2010-11-10 12:04                     ` Jimmy Rubin
2010-11-12 16:03                     ` Arnd Bergmann
2010-11-12 16:03                       ` Arnd Bergmann
2010-11-12 16:03                       ` Arnd Bergmann
2010-11-25 11:20                       ` Jimmy RUBIN
2010-11-25 11:20                         ` Jimmy RUBIN
2010-11-12 16:23                   ` [PATCH 09/10] MCDE: Add build files and bus Arnd Bergmann
2010-11-12 16:23                     ` Arnd Bergmann
2010-11-12 16:23                     ` Arnd Bergmann
2010-11-12 16:29                 ` [PATCH 08/10] MCDE: Add frame buffer device Arnd Bergmann
2010-11-12 16:29                   ` Arnd Bergmann
2010-11-12 16:29                   ` Arnd Bergmann
2010-11-25 11:52                   ` Jimmy RUBIN
2010-11-25 11:52                     ` Jimmy RUBIN
2010-11-12 16:38               ` [PATCH 07/10] MCDE: Add display subsystem framework Arnd Bergmann
2010-11-12 16:38                 ` Arnd Bergmann
2010-11-12 16:38                 ` Arnd Bergmann
2010-11-25  7:16                 ` Jimmy RUBIN
2010-11-25  7:16                   ` Jimmy RUBIN
2010-11-12 15:46       ` [PATCH 03/10] MCDE: Add pixel processing registers Arnd Bergmann
2010-11-12 15:46         ` Arnd Bergmann
2010-11-12 15:46         ` Arnd Bergmann
2010-11-12 15:14     ` [PATCH 02/10] MCDE: Add configuration registers Arnd Bergmann
2010-11-12 15:14       ` Arnd Bergmann
2010-11-12 15:14       ` Arnd Bergmann
2010-11-12 15:34       ` Russell King - ARM Linux
2010-11-12 15:34         ` Russell King - ARM Linux
2010-11-12 15:34         ` Russell King - ARM Linux
2010-11-15 14:25         ` Arnd Bergmann
2010-11-15 14:25           ` Arnd Bergmann
2010-11-15 14:25           ` Arnd Bergmann
2010-11-15 14:59           ` Russell King - ARM Linux
2010-11-15 14:59             ` Russell King - ARM Linux
2010-11-15 14:59             ` Russell King - ARM Linux
2010-11-15 18:24             ` Geert Uytterhoeven
2010-11-15 18:24               ` Geert Uytterhoeven
2010-11-15 18:24               ` Geert Uytterhoeven
2010-11-25 11:30       ` Jimmy RUBIN
2010-11-25 11:30         ` Jimmy RUBIN
2010-11-25 16:21         ` Arnd Bergmann
2010-11-25 16:21           ` Arnd Bergmann
2010-11-10 17:14   ` [PATCH 01/10] MCDE: Add hardware abstraction layer Joe Perches
2010-11-10 17:14     ` Joe Perches
2010-11-10 17:14     ` Joe Perches
2010-11-15  9:52     ` Jimmy RUBIN
2010-11-15  9:52       ` Jimmy RUBIN
2010-11-15  9:52       ` Jimmy RUBIN
2010-11-15 16:30       ` Joe Perches
2010-11-15 16:30         ` Joe Perches
2010-11-15 16:30         ` Joe Perches
2010-11-12 15:43   ` Arnd Bergmann
2010-11-12 15:43     ` Arnd Bergmann
2010-11-12 15:43     ` Arnd Bergmann
2010-11-16 15:29     ` Jimmy RUBIN
2010-11-16 15:29       ` Jimmy RUBIN
2010-11-16 15:29       ` Jimmy RUBIN
2010-11-16 16:12       ` Arnd Bergmann
2010-11-16 16:12         ` Arnd Bergmann
2010-11-16 16:12         ` Arnd Bergmann
2010-11-16 16:16         ` Arnd Bergmann
2010-11-16 16:16           ` Arnd Bergmann
2010-11-16 16:16           ` Arnd Bergmann
2010-11-16 19:46       ` Joe Perches
2010-11-16 19:46         ` Joe Perches
2010-11-16 19:46         ` Joe Perches
2010-11-17  9:55         ` Arnd Bergmann
2010-11-17  9:55           ` Arnd Bergmann
2010-11-17  9:55           ` Arnd Bergmann
2010-11-17 16:01           ` Joe Perches
2010-11-17 16:01             ` Joe Perches
2010-11-17 16:01             ` Joe Perches
2010-11-10 14:42 ` [PATCH 00/10] MCDE: Add frame buffer device driver Alex Deucher
2010-11-10 14:42   ` Alex Deucher
2010-11-10 14:42   ` Alex Deucher
2010-11-12 13:18   ` Jimmy RUBIN
2010-11-12 13:18     ` Jimmy RUBIN
2010-11-12 13:18     ` Jimmy RUBIN
2010-11-12 15:52     ` Alex Deucher
2010-11-12 15:52       ` Alex Deucher
2010-11-12 15:52       ` Alex Deucher
2010-11-12 16:46       ` Marcus LORENTZON
2010-11-12 16:46         ` Marcus LORENTZON
2010-11-12 16:46         ` Marcus LORENTZON
2010-11-12 17:22         ` Alex Deucher
2010-11-12 17:22           ` Alex Deucher
2010-11-12 17:22           ` Alex Deucher
2010-11-15 11:05           ` Michel Dänzer
2010-11-15 11:05             ` Michel Dänzer
2010-11-15 11:05             ` Michel Dänzer
2010-11-13 11:54         ` Hans Verkuil
2010-11-13 11:54           ` Hans Verkuil
2010-11-13 11:54           ` Hans Verkuil
2010-11-13 17:26           ` Marcus LORENTZON
2010-11-13 17:26             ` Marcus LORENTZON
2010-11-13 17:26             ` Marcus LORENTZON
2010-11-13 17:57             ` Hans Verkuil
2010-11-13 17:57               ` Hans Verkuil
2010-11-13 17:57               ` Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1289390653-6111-1-git-send-email-jimmy.rubin@stericsson.com \
    --to=jimmy.rubin@stericsson.com \
    --cc=dan.johansson@stericsson.com \
    --cc=linus.walleij@stericsson.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.