All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
	netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
	Realtek linux nic maintainers <nic_swsd@realtek.com>,
	Francois Romieu <romieu@fr.zoreil.com>,
	Jeff Garzik <jgarzik@pobox.com>, Donald Becker <becker@scyld.com>
Subject: [net-next v2 28/71] 8139*/atp/r8169/sc92031: Move the Realtek drivers
Date: Sat, 30 Jul 2011 20:26:47 -0700	[thread overview]
Message-ID: <1312082850-24914-29-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1312082850-24914-1-git-send-email-jeffrey.t.kirsher@intel.com>

Move the Realtek drivers into drivers/net/ethernet/realtek/ and make
the necessary Kconfig and Makefile changes.

CC: Realtek linux nic maintainers <nic_swsd@realtek.com>
CC: Francois Romieu <romieu@fr.zoreil.com>
CC: Jeff Garzik <jgarzik@pobox.com>
CC: Donald Becker <becker@scyld.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 MAINTAINERS                                       |    2 +-
 drivers/net/Kconfig                               |  106 ------------------
 drivers/net/Makefile                              |    5 -
 drivers/net/ethernet/Kconfig                      |    1 +
 drivers/net/ethernet/Makefile                     |    1 +
 drivers/net/{ => ethernet/realtek}/8139cp.c       |    0
 drivers/net/{ => ethernet/realtek}/8139too.c      |    0
 drivers/net/ethernet/realtek/Kconfig              |  122 +++++++++++++++++++++
 drivers/net/ethernet/realtek/Makefile             |    9 ++
 drivers/net/{ => ethernet/realtek}/atp.c          |    0
 drivers/net/{ => ethernet/realtek}/atp.h          |    0
 drivers/net/{ => ethernet/realtek}/pci-skeleton.c |    0
 drivers/net/{ => ethernet/realtek}/r8169.c        |    0
 drivers/net/{ => ethernet/realtek}/sc92031.c      |    0
 14 files changed, 134 insertions(+), 112 deletions(-)
 rename drivers/net/{ => ethernet/realtek}/8139cp.c (100%)
 rename drivers/net/{ => ethernet/realtek}/8139too.c (100%)
 create mode 100644 drivers/net/ethernet/realtek/Kconfig
 create mode 100644 drivers/net/ethernet/realtek/Makefile
 rename drivers/net/{ => ethernet/realtek}/atp.c (100%)
 rename drivers/net/{ => ethernet/realtek}/atp.h (100%)
 rename drivers/net/{ => ethernet/realtek}/pci-skeleton.c (100%)
 rename drivers/net/{ => ethernet/realtek}/r8169.c (100%)
 rename drivers/net/{ => ethernet/realtek}/sc92031.c (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 40eb3ce..486470e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -156,7 +156,7 @@ M:	Realtek linux nic maintainers <nic_swsd@realtek.com>
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/r8169.c
+F:	drivers/net/ethernet/realtek/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
 M:	Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8da9f96..42408d7 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -594,73 +594,6 @@ config FEALNX
 	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet 
 	  cards. <http://www.myson.com.tw/>
 
-config 8139CP
-	tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
-	depends on NET_PCI && PCI && EXPERIMENTAL
-	select CRC32
-	select MII
-	help
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the RTL8139C+ chips. If you have one of those, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8139cp.  This is recommended.
-
-config 8139TOO
-	tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	---help---
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the RTL 8129/8130/8139 chips. If you have one of those, say Y and
-	  read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8139too.  This is recommended.
-
-config 8139TOO_PIO
-	bool "Use PIO instead of MMIO"
-	default y
-	depends on 8139TOO
-	help
-	  This instructs the driver to use programmed I/O ports (PIO) instead
-	  of PCI shared memory (MMIO).  This can possibly solve some problems
-	  in case your mainboard has memory consistency issues.  If unsure,
-	  say N.
-
-config 8139TOO_TUNE_TWISTER
-	bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
-	depends on 8139TOO
-	help
-	  This implements a function which might come in handy in case you
-	  are using low quality on long cabling. It is required for RealTek
-	  RTL-8139 revision K boards, and totally unused otherwise.  It tries
-	  to match the transceiver to the cable characteristics. This is
-	  experimental since hardly documented by the manufacturer.
-	  If unsure, say Y.
-
-config 8139TOO_8129
-	bool "Support for older RTL-8129/8130 boards"
-	depends on 8139TOO
-	help
-	  This enables support for the older and uncommon RTL-8129 and
-	  RTL-8130 chips, which support MII via an external transceiver,
-	  instead of an internal one.  Disabling this option will save some
-	  memory by making the code size smaller.  If unsure, say Y.
-
-config 8139_OLD_RX_RESET
-	bool "Use older RX-reset method"
-	depends on 8139TOO
-	help
-	  The 8139too driver was recently updated to contain a more rapid
-	  reset sequence, in the face of severe receive errors.  This "new"
-	  RX-reset method should be adequate for all boards.  But if you
-	  experience problems, you can enable this option to restore the
-	  old RX-reset behavior.  If unsure, say N.
-
 config R6040
 	tristate "RDC R6040 Fast Ethernet Adapter support"
 	depends on NET_PCI && PCI
@@ -776,18 +709,6 @@ config VIA_RHINE_MMIO
 
 	  If unsure, say Y.
 
-config SC92031
-	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
-	depends on NET_PCI && PCI && EXPERIMENTAL
-	select CRC32
-	---help---
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
-	  have one of these, say Y here.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sc92031.  This is recommended.
-
 config CPMAC
 	tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
 	depends on NET_ETHERNET && EXPERIMENTAL && AR7
@@ -819,21 +740,6 @@ config NET_POCKET
 	  the questions about this class of network devices. If you say Y, you
 	  will be asked for your specific device in the following questions.
 
-config ATP
-	tristate "AT-LAN-TEC/RealTek pocket adapter support"
-	depends on NET_POCKET && PARPORT && X86
-	select CRC32
-	---help---
-	  This is a network (Ethernet) device which attaches to your parallel
-	  port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>, if you
-	  want to use this.  If you intend to use this driver, you should have
-	  said N to the "Parallel printer support", because the two drivers
-	  don't like each other.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called atp.
-
 config DE600
 	tristate "D-Link DE600 pocket adapter support"
 	depends on NET_POCKET && PARPORT
@@ -1006,18 +912,6 @@ config YELLOWFIN
 	  To compile this driver as a module, choose M here: the module
 	  will be called yellowfin.  This is recommended.
 
-config R8169
-	tristate "Realtek 8169 gigabit ethernet support"
-	depends on PCI
-	select FW_LOADER
-	select CRC32
-	select MII
-	---help---
-	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called r8169.  This is recommended.
-
 config SIS190
 	tristate "SiS190/SiS191 gigabit ethernet support"
 	depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 0b341dc..d142fc5 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -112,12 +112,8 @@ obj-$(CONFIG_DEFXX) += defxx.o
 obj-$(CONFIG_SGISEEQ) += sgiseeq.o
 obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
 obj-$(CONFIG_AT1700) += at1700.o
-obj-$(CONFIG_8139CP) += 8139cp.o
-obj-$(CONFIG_8139TOO) += 8139too.o
 obj-$(CONFIG_CPMAC) += cpmac.o
 obj-$(CONFIG_EWRK3) += ewrk3.o
-obj-$(CONFIG_ATP) += atp.o
-obj-$(CONFIG_SC92031) += sc92031.o
 
 obj-$(CONFIG_ETH16I) += eth16i.o
 obj-$(CONFIG_EQUALIZER) += eql.o
@@ -128,7 +124,6 @@ obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_NET_NETX) += netx-eth.o
 obj-$(CONFIG_DL2K) += dl2k.o
-obj-$(CONFIG_R8169) += r8169.o
 obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
 obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
 obj-$(CONFIG_DM9000) += dm9000.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 110071e..fecac79 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -32,6 +32,7 @@ source "drivers/net/ethernet/8390/Kconfig"
 source "drivers/net/ethernet/pasemi/Kconfig"
 source "drivers/net/ethernet/qlogic/Kconfig"
 source "drivers/net/ethernet/racal/Kconfig"
+source "drivers/net/ethernet/realtek/Kconfig"
 source "drivers/net/ethernet/sfc/Kconfig"
 source "drivers/net/ethernet/smsc/Kconfig"
 source "drivers/net/ethernet/stmicro/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 4a6edf7..0092c30 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
 obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
 obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
 obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
+obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
 obj-$(CONFIG_SFC) += sfc/
 obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
 obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
diff --git a/drivers/net/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
similarity index 100%
rename from drivers/net/8139cp.c
rename to drivers/net/ethernet/realtek/8139cp.c
diff --git a/drivers/net/8139too.c b/drivers/net/ethernet/realtek/8139too.c
similarity index 100%
rename from drivers/net/8139too.c
rename to drivers/net/ethernet/realtek/8139too.c
diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
new file mode 100644
index 0000000..69bff40
--- /dev/null
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -0,0 +1,122 @@
+#
+# Realtek device configuration
+#
+
+config NET_VENDOR_REALTEK
+	bool "Realtek devices"
+	depends on X86 || PCI || PARPORT
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Realtek devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+config ATP
+	tristate "AT-LAN-TEC/RealTek pocket adapter support"
+	depends on NET_VENDOR_REALTEK && PARPORT && X86
+	select CRC32
+	---help---
+	  This is a network (Ethernet) device which attaches to your parallel
+	  port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>, if you
+	  want to use this.  If you intend to use this driver, you should have
+	  said N to the "Parallel printer support", because the two drivers
+	  don't like each other.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called atp.
+
+config 8139CP
+	tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
+	depends on NET_VENDOR_REALTEK && PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the RTL8139C+ chips. If you have one of those, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8139cp.  This is recommended.
+
+config 8139TOO
+	tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
+	depends on NET_VENDOR_REALTEK && PCI
+	select CRC32
+	select MII
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the RTL 8129/8130/8139 chips. If you have one of those, say Y and
+	  read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8139too.  This is recommended.
+
+config 8139TOO_PIO
+	bool "Use PIO instead of MMIO"
+	default y
+	depends on 8139TOO
+	---help---
+	  This instructs the driver to use programmed I/O ports (PIO) instead
+	  of PCI shared memory (MMIO).  This can possibly solve some problems
+	  in case your mainboard has memory consistency issues.  If unsure,
+	  say N.
+
+config 8139TOO_TUNE_TWISTER
+	bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
+	depends on 8139TOO
+	---help---
+	  This implements a function which might come in handy in case you
+	  are using low quality on long cabling. It is required for RealTek
+	  RTL-8139 revision K boards, and totally unused otherwise.  It tries
+	  to match the transceiver to the cable characteristics. This is
+	  experimental since hardly documented by the manufacturer.
+	  If unsure, say Y.
+
+config 8139TOO_8129
+	bool "Support for older RTL-8129/8130 boards"
+	depends on 8139TOO
+	---help---
+	  This enables support for the older and uncommon RTL-8129 and
+	  RTL-8130 chips, which support MII via an external transceiver,
+	  instead of an internal one.  Disabling this option will save some
+	  memory by making the code size smaller.  If unsure, say Y.
+
+config 8139_OLD_RX_RESET
+	bool "Use older RX-reset method"
+	depends on 8139TOO
+	---help---
+	  The 8139too driver was recently updated to contain a more rapid
+	  reset sequence, in the face of severe receive errors.  This "new"
+	  RX-reset method should be adequate for all boards.  But if you
+	  experience problems, you can enable this option to restore the
+	  old RX-reset behavior.  If unsure, say N.
+
+config R8169
+	tristate "Realtek 8169 gigabit ethernet support"
+	depends on NET_VENDOR_REALTEK && PCI
+	select FW_LOADER
+	select CRC32
+	select MII
+	---help---
+	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called r8169.  This is recommended.
+
+config SC92031
+	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
+	depends on NET_VENDOR_REALTEK && PCI && EXPERIMENTAL
+	select CRC32
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
+	  have one of these, say Y here.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sc92031.  This is recommended.
diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile
new file mode 100644
index 0000000..e48cfb6
--- /dev/null
+++ b/drivers/net/ethernet/realtek/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the Realtek network device drivers.
+#
+
+obj-$(CONFIG_8139CP) += 8139cp.o
+obj-$(CONFIG_8139TOO) += 8139too.o
+obj-$(CONFIG_ATP) += atp.o
+obj-$(CONFIG_R8169) += r8169.o
+obj-$(CONFIG_SC92031) += sc92031.o
diff --git a/drivers/net/atp.c b/drivers/net/ethernet/realtek/atp.c
similarity index 100%
rename from drivers/net/atp.c
rename to drivers/net/ethernet/realtek/atp.c
diff --git a/drivers/net/atp.h b/drivers/net/ethernet/realtek/atp.h
similarity index 100%
rename from drivers/net/atp.h
rename to drivers/net/ethernet/realtek/atp.h
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/ethernet/realtek/pci-skeleton.c
similarity index 100%
rename from drivers/net/pci-skeleton.c
rename to drivers/net/ethernet/realtek/pci-skeleton.c
diff --git a/drivers/net/r8169.c b/drivers/net/ethernet/realtek/r8169.c
similarity index 100%
rename from drivers/net/r8169.c
rename to drivers/net/ethernet/realtek/r8169.c
diff --git a/drivers/net/sc92031.c b/drivers/net/ethernet/realtek/sc92031.c
similarity index 100%
rename from drivers/net/sc92031.c
rename to drivers/net/ethernet/realtek/sc92031.c
-- 
1.7.6


  parent reply	other threads:[~2011-07-31  3:28 UTC|newest]

Thread overview: 116+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-31  3:26 [RFC net-next v2 00/71] Organize/Move of the Ethernet drivers in drivers/net/ Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 01/71] drivers/net/ethernet: Add ethernet dir and config option Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 02/71] 3c*/acenic/typhoon: Move 3Com Ethernet drivers Jeff Kirsher
2011-08-01  9:03   ` Alan Cox
2011-08-01  9:21     ` David Miller
2011-08-01  9:42       ` Alan Cox
2011-08-01 20:15     ` Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 03/71] amd: Move AMD (Lance) chipset drivers Jeff Kirsher
2011-07-31  8:14   ` Geert Uytterhoeven
2011-07-31  8:30     ` Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 04/71] 8390: Move the 8390 related drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 05/71] broadcom: Move the Broadcom drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 06/71] chelsio: Move the Chelsio drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 07/71] intel: Move the Intel wired LAN drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 08/71] qlogic: Move the QLogic drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 09/71] smsc: Move the SMC (SMSC) drivers Jeff Kirsher
2011-07-31  7:17   ` Jeff Kirsher
2011-07-31 16:47   ` Nicolas Pitre
2011-08-01  6:09   ` Amit Salecha
2011-08-01  6:16     ` Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 10/71] i825xx: Move the Intel 82586/82593/82596 based drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 11/71] ni5010: Move the Racal-Interlan (Micom) driver Jeff Kirsher
2011-07-31 16:57   ` Andreas Mohr
2011-07-31 19:20     ` Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 12/71] cassini/niu/sun*: Move the Sun drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 13/71] sfc: Move the Solarflare drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 14/71] be2net: Move the Emulex driver Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 15/71] bna: Move the Brocade driver Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 16/71] mlx4: Move the Mellanox driver Jeff Kirsher
2011-08-01 13:10   ` Roland Dreier
2011-08-01 16:15     ` Eli Cohen
2011-07-31  3:26 ` [net-next v2 17/71] myri*: Move the Myricom drivers Jeff Kirsher
2011-08-01 17:09   ` Jon Mason
2011-08-03  6:02     ` Jeff Kirsher
2011-08-03 19:37       ` Jon Mason
2011-07-31  3:26 ` [net-next v2 18/71] s2io/vxge: Move the Exar drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 19/71] ehea/ibm*: Move the IBM drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 20/71] enic: Move the Cisco driver Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 21/71] pasemic_mac*: Move the PA Semi driver Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 22/71] tehuti: Move the Tehuti driver Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 23/71] stmmac: Move the STMicroelectronics driver Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 24/71] bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 25/71] *sonic/natsemi/ns83829: Move the National Semi-conductor drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 26/71] xscale: Move the Intel XScale IXP drivers Jeff Kirsher
2011-07-31  8:38   ` Lennert Buytenhek
2011-07-31  3:26 ` [net-next v2 27/71] ftgmac100/ftmac100: Move the Faraday drivers Jeff Kirsher
2011-07-31  3:26 ` Jeff Kirsher [this message]
2011-08-02  0:24   ` [net-next v2 28/71] 8139*/atp/r8169/sc92031: Move the Realtek drivers Ben Hutchings
2011-08-02  3:21     ` Jeff Garzik
2011-08-02  3:41       ` Jeff Kirsher
2011-08-02  3:48       ` David Miller
2011-08-02  3:58         ` Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 29/71] de6*/dl2k/sundance: Move the D-Link drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 30/71] atl*: Move the Atheros drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 31/71] ewrk3/tulip: Move the DEC - Tulip drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 32/71] ioc3-eth/meth: Move the SGI drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 33/71] seeq: Move the SEEQ drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 34/71] pch_gbe: Move the OKI Semiconductor driver Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 35/71] skge/sky2/mv643xx/pxa168: Move the Marvell Ethernet drivers Jeff Kirsher
2011-07-31 22:11   ` Stephen Hemminger
2011-07-31 22:27     ` Joe Perches
2011-08-01  2:35       ` Jeff Kirsher
2011-08-01  2:43       ` Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 36/71] via-*: Move the VIA drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 37/71] eth16i: Move the Allied Telesis/Fujitsu drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 38/71] freescale: Move the Freescale drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 39/71] ks8*/ksz8*: Move the Micrel drivers Jeff Kirsher
2011-07-31  3:26 ` [net-next v2 40/71] toshiba: Move the Toshiba drivers Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 41/71] sis*: Move the Silicon Integrated Systems (SiS) drivers Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 42/71] cirrus: Move the Cirrus network driver Jeff Kirsher
2011-08-01 20:23   ` H Hartley Sweeten
2011-08-03  5:29     ` Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 43/71] nuvoton: Move the Nuvoton driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 44/71] tsi108*: Move the Tundra driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 45/71] s6gmac: Move the s6gmac drivers Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 46/71] davinci*/tlan/cpmac: Move the Texas Instruments (TI) drivers Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 47/71] hamachi/yellowfin: Move the packet engine drivers Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 48/71] octeon: Move the Cavium driver Jeff Kirsher
2011-08-02 22:48   ` David Daney
2011-08-03  4:59     ` Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 49/71] jme: Move the JME driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 50/71] xilinx/ll_temac: Move the Xilinx drivers Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 51/71] ipg: Move the IC Plus driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 52/71] korina: Move the IDT driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 53/71] mipsnet: Move the MIPS driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 54/71] lantiq: Move the Lantiq SoC driver Jeff Kirsher
2011-08-01 16:14   ` John Crispin
2011-07-31  3:27 ` [net-next v2 55/71] bfin_mac: Move the Analog Devices Inc driver Jeff Kirsher
2011-08-05  5:18   ` [uclinux-dist-devel] " Bob Liu
2011-07-31  3:27 ` [net-next v2 56/71] macb: Move the Atmel driver Jeff Kirsher
2011-08-01 14:41   ` Jamie Iles
2011-08-01 14:49   ` Nicolas Ferre
2011-08-03  5:59     ` Jeff Kirsher
2011-08-03  8:47       ` Jamie Iles
2011-08-03  8:50         ` Nicolas Ferre
2011-08-03  9:03           ` Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 57/71] r6040: Move the RDC driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 58/71] fealnx: Move the Myson driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 59/71] forcedeth: Move the NVIDIA nForce driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 60/71] starfire: Move the Adaptec driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 61/71] hp100: Move the HP driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 62/71] dnet: Move the Dave Ethernet driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 63/71] ethoc: Move the Avionic driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 64/71] greth: Move the Aeroflex Gaisler driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 65/71] enc28j60: Move the Microchip driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 66/71] dm9000: Move the Davicom driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 67/71] netx: Move the netx driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 68/71] sh_eth: Move the Renesas SuperH driver Jeff Kirsher
2011-07-31  3:27 ` [net-next v2 69/71] xircom: Move the Xircom driver Jeff Kirsher
2011-07-31  8:52   ` Dominik Brodowski
2011-07-31  3:27 ` [net-next v2 70/71] tile: Move the Tilera driver Jeff Kirsher
2011-08-01 17:21   ` Chris Metcalf
2011-08-02  3:53     ` Jeff Kirsher
2011-08-03  5:47     ` Jeff Kirsher
2011-08-03 19:02       ` Chris Metcalf
2011-07-31  3:27 ` [net-next v2 71/71] drivers/net: Kconfig and Makefile cleanup Jeff Kirsher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1312082850-24914-29-git-send-email-jeffrey.t.kirsher@intel.com \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=becker@scyld.com \
    --cc=davem@davemloft.net \
    --cc=gospo@redhat.com \
    --cc=jgarzik@pobox.com \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    --cc=romieu@fr.zoreil.com \
    --cc=sassmann@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.