From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
Sandeep Gopalpet <sandeep.kumar@freescale.com>,
Andy Fleming <afleming@freescale.com>,
Shlomi Gridish <gridish@freescale.com>,
Li Yang <leoli@freescale.com>,
Pantelis Antoniou <pantelis.antoniou@gmail.com>,
Vitaly Bordug <vbordug@ru.mvista.com>, Dan Malek <dmalek@jlc.net>,
Sylvain Munaut <tnt@246tNt.com>
Subject: [net-next v2 38/71] freescale: Move the Freescale drivers
Date: Sat, 30 Jul 2011 20:26:57 -0700 [thread overview]
Message-ID: <1312082850-24914-39-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1312082850-24914-1-git-send-email-jeffrey.t.kirsher@intel.com>
Move the Freescale drivers into drivers/net/ethernet/freescale/ and
make the necessary Kconfig and Makefile changes.
CC: Sandeep Gopalpet <sandeep.kumar@freescale.com>
CC: Andy Fleming <afleming@freescale.com>
CC: Shlomi Gridish <gridish@freescale.com>
CC: Li Yang <leoli@freescale.com>
CC: Pantelis Antoniou <pantelis.antoniou@gmail.com>
CC: Vitaly Bordug <vbordug@ru.mvista.com>
CC: Dan Malek <dmalek@jlc.net>
CC: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
MAINTAINERS | 4 +-
drivers/net/Kconfig | 66 ---------------
drivers/net/Makefile | 18 ----
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/freescale/Kconfig | 85 ++++++++++++++++++++
drivers/net/ethernet/freescale/Makefile | 18 ++++
drivers/net/{ => ethernet/freescale}/fec.c | 0
drivers/net/{ => ethernet/freescale}/fec.h | 0
drivers/net/{ => ethernet/freescale}/fec_mpc52xx.c | 0
drivers/net/{ => ethernet/freescale}/fec_mpc52xx.h | 0
.../net/{ => ethernet/freescale}/fec_mpc52xx_phy.c | 0
.../net/{ => ethernet/freescale}/fs_enet/Kconfig | 2 +-
.../net/{ => ethernet/freescale}/fs_enet/Makefile | 0
drivers/net/{ => ethernet/freescale}/fs_enet/fec.h | 0
.../freescale}/fs_enet/fs_enet-main.c | 0
.../net/{ => ethernet/freescale}/fs_enet/fs_enet.h | 0
.../net/{ => ethernet/freescale}/fs_enet/mac-fcc.c | 0
.../net/{ => ethernet/freescale}/fs_enet/mac-fec.c | 0
.../net/{ => ethernet/freescale}/fs_enet/mac-scc.c | 0
.../{ => ethernet/freescale}/fs_enet/mii-bitbang.c | 0
.../net/{ => ethernet/freescale}/fs_enet/mii-fec.c | 0
drivers/net/{ => ethernet/freescale}/fsl_pq_mdio.c | 0
drivers/net/{ => ethernet/freescale}/fsl_pq_mdio.h | 0
drivers/net/{ => ethernet/freescale}/gianfar.c | 0
drivers/net/{ => ethernet/freescale}/gianfar.h | 0
.../net/{ => ethernet/freescale}/gianfar_ethtool.c | 0
drivers/net/{ => ethernet/freescale}/gianfar_ptp.c | 0
.../net/{ => ethernet/freescale}/gianfar_sysfs.c | 0
drivers/net/{ => ethernet/freescale}/ucc_geth.c | 0
drivers/net/{ => ethernet/freescale}/ucc_geth.h | 0
.../{ => ethernet/freescale}/ucc_geth_ethtool.c | 0
32 files changed, 108 insertions(+), 87 deletions(-)
create mode 100644 drivers/net/ethernet/freescale/Kconfig
create mode 100644 drivers/net/ethernet/freescale/Makefile
rename drivers/net/{ => ethernet/freescale}/fec.c (100%)
rename drivers/net/{ => ethernet/freescale}/fec.h (100%)
rename drivers/net/{ => ethernet/freescale}/fec_mpc52xx.c (100%)
rename drivers/net/{ => ethernet/freescale}/fec_mpc52xx.h (100%)
rename drivers/net/{ => ethernet/freescale}/fec_mpc52xx_phy.c (100%)
rename drivers/net/{ => ethernet/freescale}/fs_enet/Kconfig (91%)
rename drivers/net/{ => ethernet/freescale}/fs_enet/Makefile (100%)
rename drivers/net/{ => ethernet/freescale}/fs_enet/fec.h (100%)
rename drivers/net/{ => ethernet/freescale}/fs_enet/fs_enet-main.c (100%)
rename drivers/net/{ => ethernet/freescale}/fs_enet/fs_enet.h (100%)
rename drivers/net/{ => ethernet/freescale}/fs_enet/mac-fcc.c (100%)
rename drivers/net/{ => ethernet/freescale}/fs_enet/mac-fec.c (100%)
rename drivers/net/{ => ethernet/freescale}/fs_enet/mac-scc.c (100%)
rename drivers/net/{ => ethernet/freescale}/fs_enet/mii-bitbang.c (100%)
rename drivers/net/{ => ethernet/freescale}/fs_enet/mii-fec.c (100%)
rename drivers/net/{ => ethernet/freescale}/fsl_pq_mdio.c (100%)
rename drivers/net/{ => ethernet/freescale}/fsl_pq_mdio.h (100%)
rename drivers/net/{ => ethernet/freescale}/gianfar.c (100%)
rename drivers/net/{ => ethernet/freescale}/gianfar.h (100%)
rename drivers/net/{ => ethernet/freescale}/gianfar_ethtool.c (100%)
rename drivers/net/{ => ethernet/freescale}/gianfar_ptp.c (100%)
rename drivers/net/{ => ethernet/freescale}/gianfar_sysfs.c (100%)
rename drivers/net/{ => ethernet/freescale}/ucc_geth.c (100%)
rename drivers/net/{ => ethernet/freescale}/ucc_geth.h (100%)
rename drivers/net/{ => ethernet/freescale}/ucc_geth_ethtool.c (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 9e4a6b0..8843c16 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2677,7 +2677,7 @@ M: Vitaly Bordug <vbordug@ru.mvista.com>
L: linuxppc-dev@lists.ozlabs.org
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/fs_enet/
+F: drivers/net/ethernet/freescale/fs_enet/
F: include/linux/fs_enet_pd.h
FREESCALE QUICC ENGINE LIBRARY
@@ -2699,7 +2699,7 @@ M: Li Yang <leoli@freescale.com>
L: netdev@vger.kernel.org
L: linuxppc-dev@lists.ozlabs.org
S: Maintained
-F: drivers/net/ucc_geth*
+F: drivers/net/ethernet/freescale/ucc_geth*
FREESCALE QUICC ENGINE UCC UART DRIVER
M: Timur Tabi <timur@freescale.com>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 91a498e..ce9771a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -605,39 +605,6 @@ config NET_POCKET
the questions about this class of network devices. If you say Y, you
will be asked for your specific device in the following questions.
-config FEC
- bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
- depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
- IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC
- default IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC if ARM
- select PHYLIB
- help
- Say Y here if you want to use the built-in 10/100 Fast ethernet
- controller on some Motorola ColdFire and Freescale i.MX processors.
-
-config FEC_MPC52xx
- tristate "MPC52xx FEC driver"
- depends on PPC_MPC52xx && PPC_BESTCOMM
- select CRC32
- select PHYLIB
- select PPC_BESTCOMM_FEC
- ---help---
- This option enables support for the MPC5200's on-chip
- Fast Ethernet Controller
- If compiled as module, it will be called fec_mpc52xx.
-
-config FEC_MPC52xx_MDIO
- bool "MPC52xx FEC MDIO bus driver"
- depends on FEC_MPC52xx
- default y
- ---help---
- The MPC5200's FEC can connect to the Ethernet either with
- an external MII PHY chip or 10 Mbps 7-wire interface
- (Motorola? industry standard).
- If your board uses an external PHY connected to FEC, enable this.
- If not sure, enable.
- If compiled as module, it will be called fec_mpc52xx_phy.
-
config XILINX_EMACLITE
tristate "Xilinx 10/100 Ethernet Lite support"
depends on PPC32 || MICROBLAZE
@@ -651,9 +618,6 @@ config LANTIQ_ETOP
help
Support for the MII0 inside the Lantiq SoC
-
-source "drivers/net/fs_enet/Kconfig"
-
source "drivers/net/octeon/Kconfig"
endif # NET_ETHERNET
@@ -768,36 +732,6 @@ config GELIC_WIRELESS
the driver automatically distinguishes the models, you can
safely enable this option even if you have a wireless-less model.
-config FSL_PQ_MDIO
- tristate "Freescale PQ MDIO"
- depends on FSL_SOC
- select PHYLIB
- help
- This driver supports the MDIO bus used by the gianfar and UCC drivers.
-
-config GIANFAR
- tristate "Gianfar Ethernet"
- depends on FSL_SOC
- select FSL_PQ_MDIO
- select PHYLIB
- select CRC32
- help
- This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
- and MPC86xx family of chips, and the FEC on the 8540.
-
-config UCC_GETH
- tristate "Freescale QE Gigabit Ethernet"
- depends on QUICC_ENGINE
- select FSL_PQ_MDIO
- select PHYLIB
- help
- This driver supports the Gigabit Ethernet mode of the QUICC Engine,
- which is available on some Freescale SOCs.
-
-config UGETH_TX_ON_DEMAND
- bool "Transmit on Demand support"
- depends on UCC_GETH
-
config XILINX_LL_TEMAC
tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
depends on PPC || MICROBLAZE
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 00a180c..8801f33 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -13,20 +13,9 @@ obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
obj-$(CONFIG_IP1000) += ipg.o
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_BONDING) += bonding/
-obj-$(CONFIG_GIANFAR) += gianfar_driver.o
-obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
obj-$(CONFIG_JME) += jme.o
obj-$(CONFIG_VMXNET3) += vmxnet3/
-gianfar_driver-objs := gianfar.o \
- gianfar_ethtool.o \
- gianfar_sysfs.o
-
-obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
-ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o
-
-obj-$(CONFIG_FSL_PQ_MDIO) += fsl_pq_mdio.o
-
#
# link order important here
#
@@ -63,11 +52,6 @@ obj-$(CONFIG_HAMACHI) += hamachi.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_NET_SB1000) += sb1000.o
obj-$(CONFIG_HP100) += hp100.o
-obj-$(CONFIG_FEC) += fec.o
-obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
-ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
- obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
-endif
obj-$(CONFIG_FORCEDETH) += forcedeth.o
obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
@@ -139,8 +123,6 @@ obj-$(CONFIG_ETRAX_ETHERNET) += cris/
obj-$(CONFIG_NETCONSOLE) += netconsole.o
-obj-$(CONFIG_FS_ENET) += fs_enet/
-
obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
obj-$(CONFIG_WIMAX) += wimax/
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index d3aff74..924c287 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -24,6 +24,7 @@ source "drivers/net/ethernet/dlink/Kconfig"
source "drivers/net/ethernet/emulex/Kconfig"
source "drivers/net/ethernet/neterion/Kconfig"
source "drivers/net/ethernet/faraday/Kconfig"
+source "drivers/net/ethernet/freescale/Kconfig"
source "drivers/net/ethernet/fujitsu/Kconfig"
source "drivers/net/ethernet/ibm/Kconfig"
source "drivers/net/ethernet/intel/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index b098c5e..025d7b7 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
+obj-$(CONFIG_NET_VENDOR_FREESCALE) += freescale/
obj-$(CONFIG_NET_VENDOR_FUJITSU) += fujitsu/
obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
new file mode 100644
index 0000000..6913409
--- /dev/null
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -0,0 +1,85 @@
+#
+# Freescale device configuration
+#
+
+config NET_VENDOR_FEESCALE
+ bool "Freescale devices"
+ depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
+ M523x || M527x || M5272 || M528x || M520x || M532x || \
+ IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC || \
+ (PPC_MPC52xx && PPC_BESTCOMM)
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about IBM devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+config FEC
+ bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
+ depends on NET_VENDOR_FREESCALE && (M523x || M527x || M5272 || \
+ M528x || M520x || M532x || IMX_HAVE_PLATFORM_FEC || \
+ MXS_HAVE_PLATFORM_FEC)
+ default IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC if ARM
+ select PHYLIB
+ ---help---
+ Say Y here if you want to use the built-in 10/100 Fast ethernet
+ controller on some Motorola ColdFire and Freescale i.MX processors.
+
+config FEC_MPC52xx
+ tristate "FEC MPC52xx driver"
+ depends on NET_VENDOR_FREESCALE && PPC_MPC52xx && PPC_BESTCOMM
+ select CRC32
+ select PHYLIB
+ select PPC_BESTCOMM_FEC
+ ---help---
+ This option enables support for the MPC5200's on-chip
+ Fast Ethernet Controller
+ If compiled as module, it will be called fec_mpc52xx.
+
+config FEC_MPC52xx_MDIO
+ bool "FEC MPC52xx MDIO bus driver"
+ depends on FEC_MPC52xx
+ default y
+ ---help---
+ The MPC5200's FEC can connect to the Ethernet either with
+ an external MII PHY chip or 10 Mbps 7-wire interface
+ (Motorola? industry standard).
+ If your board uses an external PHY connected to FEC, enable this.
+ If not sure, enable.
+ If compiled as module, it will be called fec_mpc52xx_phy.
+
+source "drivers/net/ethernet/freescale/fs_enet/Kconfig"
+
+config FSL_PQ_MDIO
+ tristate "Freescale PQ MDIO"
+ depends on NET_VENDOR_FREESCALE && FSL_SOC
+ select PHYLIB
+ ---help---
+ This driver supports the MDIO bus used by the gianfar and UCC drivers.
+
+config UCC_GETH
+ tristate "Freescale QE Gigabit Ethernet"
+ depends on NET_VENDOR_FREESCALE && QUICC_ENGINE
+ select FSL_PQ_MDIO
+ select PHYLIB
+ ---help---
+ This driver supports the Gigabit Ethernet mode of the QUICC Engine,
+ which is available on some Freescale SOCs.
+
+config UGETH_TX_ON_DEMAND
+ bool "Transmit on Demand support"
+ depends on UCC_GETH
+
+config GIANFAR
+ tristate "Gianfar Ethernet"
+ depends on NET_VENDOR_FREESCALE && FSL_SOC
+ select FSL_PQ_MDIO
+ select PHYLIB
+ select CRC32
+ ---help---
+ This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
+ and MPC86xx family of chips, and the FEC on the 8540.
diff --git a/drivers/net/ethernet/freescale/Makefile b/drivers/net/ethernet/freescale/Makefile
new file mode 100644
index 0000000..1752488
--- /dev/null
+++ b/drivers/net/ethernet/freescale/Makefile
@@ -0,0 +1,18 @@
+#
+# Makefile for the Freescale network device drivers.
+#
+
+obj-$(CONFIG_FEC) += fec.o
+obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
+ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
+ obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
+endif
+obj-$(CONFIG_FS_ENET) += fs_enet/
+obj-$(CONFIG_FSL_PQ_MDIO) += fsl_pq_mdio.o
+obj-$(CONFIG_GIANFAR) += gianfar_driver.o
+obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
+gianfar_driver-objs := gianfar.o \
+ gianfar_ethtool.o \
+ gianfar_sysfs.o
+obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
+ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o
diff --git a/drivers/net/fec.c b/drivers/net/ethernet/freescale/fec.c
similarity index 100%
rename from drivers/net/fec.c
rename to drivers/net/ethernet/freescale/fec.c
diff --git a/drivers/net/fec.h b/drivers/net/ethernet/freescale/fec.h
similarity index 100%
rename from drivers/net/fec.h
rename to drivers/net/ethernet/freescale/fec.h
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/ethernet/freescale/fec_mpc52xx.c
similarity index 100%
rename from drivers/net/fec_mpc52xx.c
rename to drivers/net/ethernet/freescale/fec_mpc52xx.c
diff --git a/drivers/net/fec_mpc52xx.h b/drivers/net/ethernet/freescale/fec_mpc52xx.h
similarity index 100%
rename from drivers/net/fec_mpc52xx.h
rename to drivers/net/ethernet/freescale/fec_mpc52xx.h
diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/ethernet/freescale/fec_mpc52xx_phy.c
similarity index 100%
rename from drivers/net/fec_mpc52xx_phy.c
rename to drivers/net/ethernet/freescale/fec_mpc52xx_phy.c
diff --git a/drivers/net/fs_enet/Kconfig b/drivers/net/ethernet/freescale/fs_enet/Kconfig
similarity index 91%
rename from drivers/net/fs_enet/Kconfig
rename to drivers/net/ethernet/freescale/fs_enet/Kconfig
index fc073b5..be92229 100644
--- a/drivers/net/fs_enet/Kconfig
+++ b/drivers/net/ethernet/freescale/fs_enet/Kconfig
@@ -1,6 +1,6 @@
config FS_ENET
tristate "Freescale Ethernet Driver"
- depends on CPM1 || CPM2 || PPC_MPC512x
+ depends on NET_VENDOR_FREESCALE && (CPM1 || CPM2 || PPC_MPC512x)
select MII
select PHYLIB
diff --git a/drivers/net/fs_enet/Makefile b/drivers/net/ethernet/freescale/fs_enet/Makefile
similarity index 100%
rename from drivers/net/fs_enet/Makefile
rename to drivers/net/ethernet/freescale/fs_enet/Makefile
diff --git a/drivers/net/fs_enet/fec.h b/drivers/net/ethernet/freescale/fs_enet/fec.h
similarity index 100%
rename from drivers/net/fs_enet/fec.h
rename to drivers/net/ethernet/freescale/fs_enet/fec.h
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
similarity index 100%
rename from drivers/net/fs_enet/fs_enet-main.c
rename to drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/ethernet/freescale/fs_enet/fs_enet.h
similarity index 100%
rename from drivers/net/fs_enet/fs_enet.h
rename to drivers/net/ethernet/freescale/fs_enet/fs_enet.h
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c
similarity index 100%
rename from drivers/net/fs_enet/mac-fcc.c
rename to drivers/net/ethernet/freescale/fs_enet/mac-fcc.c
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/ethernet/freescale/fs_enet/mac-fec.c
similarity index 100%
rename from drivers/net/fs_enet/mac-fec.c
rename to drivers/net/ethernet/freescale/fs_enet/mac-fec.c
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/ethernet/freescale/fs_enet/mac-scc.c
similarity index 100%
rename from drivers/net/fs_enet/mac-scc.c
rename to drivers/net/ethernet/freescale/fs_enet/mac-scc.c
diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c
similarity index 100%
rename from drivers/net/fs_enet/mii-bitbang.c
rename to drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c
diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/ethernet/freescale/fs_enet/mii-fec.c
similarity index 100%
rename from drivers/net/fs_enet/mii-fec.c
rename to drivers/net/ethernet/freescale/fs_enet/mii-fec.c
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
similarity index 100%
rename from drivers/net/fsl_pq_mdio.c
rename to drivers/net/ethernet/freescale/fsl_pq_mdio.c
diff --git a/drivers/net/fsl_pq_mdio.h b/drivers/net/ethernet/freescale/fsl_pq_mdio.h
similarity index 100%
rename from drivers/net/fsl_pq_mdio.h
rename to drivers/net/ethernet/freescale/fsl_pq_mdio.h
diff --git a/drivers/net/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
similarity index 100%
rename from drivers/net/gianfar.c
rename to drivers/net/ethernet/freescale/gianfar.c
diff --git a/drivers/net/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
similarity index 100%
rename from drivers/net/gianfar.h
rename to drivers/net/ethernet/freescale/gianfar.h
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c
similarity index 100%
rename from drivers/net/gianfar_ethtool.c
rename to drivers/net/ethernet/freescale/gianfar_ethtool.c
diff --git a/drivers/net/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c
similarity index 100%
rename from drivers/net/gianfar_ptp.c
rename to drivers/net/ethernet/freescale/gianfar_ptp.c
diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/ethernet/freescale/gianfar_sysfs.c
similarity index 100%
rename from drivers/net/gianfar_sysfs.c
rename to drivers/net/ethernet/freescale/gianfar_sysfs.c
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
similarity index 100%
rename from drivers/net/ucc_geth.c
rename to drivers/net/ethernet/freescale/ucc_geth.c
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h
similarity index 100%
rename from drivers/net/ucc_geth.h
rename to drivers/net/ethernet/freescale/ucc_geth.h
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ethernet/freescale/ucc_geth_ethtool.c
similarity index 100%
rename from drivers/net/ucc_geth_ethtool.c
rename to drivers/net/ethernet/freescale/ucc_geth_ethtool.c
--
1.7.6
next prev parent reply other threads:[~2011-07-31 3:28 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-31 3:26 [RFC net-next v2 00/71] Organize/Move of the Ethernet drivers in drivers/net/ Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 01/71] drivers/net/ethernet: Add ethernet dir and config option Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 02/71] 3c*/acenic/typhoon: Move 3Com Ethernet drivers Jeff Kirsher
2011-08-01 9:03 ` Alan Cox
2011-08-01 9:21 ` David Miller
2011-08-01 9:42 ` Alan Cox
2011-08-01 20:15 ` Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 03/71] amd: Move AMD (Lance) chipset drivers Jeff Kirsher
2011-07-31 8:14 ` Geert Uytterhoeven
2011-07-31 8:30 ` Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 04/71] 8390: Move the 8390 related drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 05/71] broadcom: Move the Broadcom drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 06/71] chelsio: Move the Chelsio drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 07/71] intel: Move the Intel wired LAN drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 08/71] qlogic: Move the QLogic drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 09/71] smsc: Move the SMC (SMSC) drivers Jeff Kirsher
2011-07-31 7:17 ` Jeff Kirsher
2011-07-31 16:47 ` Nicolas Pitre
2011-08-01 6:09 ` Amit Salecha
2011-08-01 6:16 ` Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 10/71] i825xx: Move the Intel 82586/82593/82596 based drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 11/71] ni5010: Move the Racal-Interlan (Micom) driver Jeff Kirsher
2011-07-31 16:57 ` Andreas Mohr
2011-07-31 19:20 ` Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 12/71] cassini/niu/sun*: Move the Sun drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 13/71] sfc: Move the Solarflare drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 14/71] be2net: Move the Emulex driver Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 15/71] bna: Move the Brocade driver Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 16/71] mlx4: Move the Mellanox driver Jeff Kirsher
2011-08-01 13:10 ` Roland Dreier
2011-08-01 16:15 ` Eli Cohen
2011-07-31 3:26 ` [net-next v2 17/71] myri*: Move the Myricom drivers Jeff Kirsher
2011-08-01 17:09 ` Jon Mason
2011-08-03 6:02 ` Jeff Kirsher
2011-08-03 19:37 ` Jon Mason
2011-07-31 3:26 ` [net-next v2 18/71] s2io/vxge: Move the Exar drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 19/71] ehea/ibm*: Move the IBM drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 20/71] enic: Move the Cisco driver Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 21/71] pasemic_mac*: Move the PA Semi driver Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 22/71] tehuti: Move the Tehuti driver Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 23/71] stmmac: Move the STMicroelectronics driver Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 24/71] bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 25/71] *sonic/natsemi/ns83829: Move the National Semi-conductor drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 26/71] xscale: Move the Intel XScale IXP drivers Jeff Kirsher
2011-07-31 8:38 ` Lennert Buytenhek
2011-07-31 3:26 ` [net-next v2 27/71] ftgmac100/ftmac100: Move the Faraday drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 28/71] 8139*/atp/r8169/sc92031: Move the Realtek drivers Jeff Kirsher
2011-08-02 0:24 ` Ben Hutchings
2011-08-02 3:21 ` Jeff Garzik
2011-08-02 3:41 ` Jeff Kirsher
2011-08-02 3:48 ` David Miller
2011-08-02 3:58 ` Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 29/71] de6*/dl2k/sundance: Move the D-Link drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 30/71] atl*: Move the Atheros drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 31/71] ewrk3/tulip: Move the DEC - Tulip drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 32/71] ioc3-eth/meth: Move the SGI drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 33/71] seeq: Move the SEEQ drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 34/71] pch_gbe: Move the OKI Semiconductor driver Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 35/71] skge/sky2/mv643xx/pxa168: Move the Marvell Ethernet drivers Jeff Kirsher
2011-07-31 22:11 ` Stephen Hemminger
2011-07-31 22:27 ` Joe Perches
2011-08-01 2:35 ` Jeff Kirsher
2011-08-01 2:43 ` Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 36/71] via-*: Move the VIA drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 37/71] eth16i: Move the Allied Telesis/Fujitsu drivers Jeff Kirsher
2011-07-31 3:26 ` Jeff Kirsher [this message]
2011-07-31 3:26 ` [net-next v2 39/71] ks8*/ksz8*: Move the Micrel drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 40/71] toshiba: Move the Toshiba drivers Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 41/71] sis*: Move the Silicon Integrated Systems (SiS) drivers Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 42/71] cirrus: Move the Cirrus network driver Jeff Kirsher
2011-08-01 20:23 ` H Hartley Sweeten
2011-08-03 5:29 ` Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 43/71] nuvoton: Move the Nuvoton driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 44/71] tsi108*: Move the Tundra driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 45/71] s6gmac: Move the s6gmac drivers Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 46/71] davinci*/tlan/cpmac: Move the Texas Instruments (TI) drivers Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 47/71] hamachi/yellowfin: Move the packet engine drivers Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 48/71] octeon: Move the Cavium driver Jeff Kirsher
2011-08-02 22:48 ` David Daney
2011-08-03 4:59 ` Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 49/71] jme: Move the JME driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 50/71] xilinx/ll_temac: Move the Xilinx drivers Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 51/71] ipg: Move the IC Plus driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 52/71] korina: Move the IDT driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 53/71] mipsnet: Move the MIPS driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 54/71] lantiq: Move the Lantiq SoC driver Jeff Kirsher
2011-08-01 16:14 ` John Crispin
2011-07-31 3:27 ` [net-next v2 55/71] bfin_mac: Move the Analog Devices Inc driver Jeff Kirsher
2011-08-05 5:18 ` [uclinux-dist-devel] " Bob Liu
2011-07-31 3:27 ` [net-next v2 56/71] macb: Move the Atmel driver Jeff Kirsher
2011-08-01 14:41 ` Jamie Iles
2011-08-01 14:49 ` Nicolas Ferre
2011-08-03 5:59 ` Jeff Kirsher
2011-08-03 8:47 ` Jamie Iles
2011-08-03 8:50 ` Nicolas Ferre
2011-08-03 9:03 ` Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 57/71] r6040: Move the RDC driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 58/71] fealnx: Move the Myson driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 59/71] forcedeth: Move the NVIDIA nForce driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 60/71] starfire: Move the Adaptec driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 61/71] hp100: Move the HP driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 62/71] dnet: Move the Dave Ethernet driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 63/71] ethoc: Move the Avionic driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 64/71] greth: Move the Aeroflex Gaisler driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 65/71] enc28j60: Move the Microchip driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 66/71] dm9000: Move the Davicom driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 67/71] netx: Move the netx driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 68/71] sh_eth: Move the Renesas SuperH driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 69/71] xircom: Move the Xircom driver Jeff Kirsher
2011-07-31 8:52 ` Dominik Brodowski
2011-07-31 3:27 ` [net-next v2 70/71] tile: Move the Tilera driver Jeff Kirsher
2011-08-01 17:21 ` Chris Metcalf
2011-08-02 3:53 ` Jeff Kirsher
2011-08-03 5:47 ` Jeff Kirsher
2011-08-03 19:02 ` Chris Metcalf
2011-07-31 3:27 ` [net-next v2 71/71] drivers/net: Kconfig and Makefile cleanup Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1312082850-24914-39-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=afleming@freescale.com \
--cc=davem@davemloft.net \
--cc=dmalek@jlc.net \
--cc=gospo@redhat.com \
--cc=gridish@freescale.com \
--cc=leoli@freescale.com \
--cc=netdev@vger.kernel.org \
--cc=pantelis.antoniou@gmail.com \
--cc=sandeep.kumar@freescale.com \
--cc=sassmann@redhat.com \
--cc=tnt@246tNt.com \
--cc=vbordug@ru.mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.