From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
Tobias Ringstrom <tori@unhappy.mine.nu>,
Grant Grundler <grundler@parisc-linux.org>,
David Davies <davies@maniac.ultranet.com>
Subject: [net-next v2 31/71] ewrk3/tulip: Move the DEC - Tulip drivers
Date: Sat, 30 Jul 2011 20:26:50 -0700 [thread overview]
Message-ID: <1312082850-24914-32-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1312082850-24914-1-git-send-email-jeffrey.t.kirsher@intel.com>
Move the DEC - Tulip driver into drivers/net/ethernet/dec/tulip/
and make the necessary Kconfig and Makefile changes.
The Digital Equioment (DEC) driver ewrk3 was moved into
drivers/net/ethernet/dec/ and the remaining drivers (Tulip)
were moved into drivers/net/ethernet/dec/tulip/
CC: Tobias Ringstrom <tori@unhappy.mine.nu>
CC: Grant Grundler <grundler@parisc-linux.org>
CC: David Davies <davies@maniac.ultranet.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
---
MAINTAINERS | 4 +-
drivers/net/Kconfig | 16 ---------
drivers/net/Makefile | 2 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/dec/Kconfig | 30 ++++++++++++++++
drivers/net/ethernet/dec/Makefile | 6 +++
drivers/net/{ => ethernet/dec}/ewrk3.c | 0
drivers/net/{ => ethernet/dec}/ewrk3.h | 0
drivers/net/{ => ethernet/dec}/tulip/21142.c | 0
drivers/net/{ => ethernet/dec}/tulip/Kconfig | 36 +++++++++-----------
drivers/net/{ => ethernet/dec}/tulip/Makefile | 0
drivers/net/{ => ethernet/dec}/tulip/de2104x.c | 0
drivers/net/{ => ethernet/dec}/tulip/de4x5.c | 0
drivers/net/{ => ethernet/dec}/tulip/de4x5.h | 0
drivers/net/{ => ethernet/dec}/tulip/dmfe.c | 0
drivers/net/{ => ethernet/dec}/tulip/eeprom.c | 0
drivers/net/{ => ethernet/dec}/tulip/interrupt.c | 0
drivers/net/{ => ethernet/dec}/tulip/media.c | 0
drivers/net/{ => ethernet/dec}/tulip/pnic.c | 0
drivers/net/{ => ethernet/dec}/tulip/pnic2.c | 0
drivers/net/{ => ethernet/dec}/tulip/timer.c | 0
drivers/net/{ => ethernet/dec}/tulip/tulip.h | 0
drivers/net/{ => ethernet/dec}/tulip/tulip_core.c | 0
drivers/net/{ => ethernet/dec}/tulip/uli526x.c | 0
drivers/net/{ => ethernet/dec}/tulip/winbond-840.c | 0
drivers/net/{ => ethernet/dec}/tulip/xircom_cb.c | 0
27 files changed, 56 insertions(+), 40 deletions(-)
create mode 100644 drivers/net/ethernet/dec/Kconfig
create mode 100644 drivers/net/ethernet/dec/Makefile
rename drivers/net/{ => ethernet/dec}/ewrk3.c (100%)
rename drivers/net/{ => ethernet/dec}/ewrk3.h (100%)
rename drivers/net/{ => ethernet/dec}/tulip/21142.c (100%)
rename drivers/net/{ => ethernet/dec}/tulip/Kconfig (93%)
rename drivers/net/{ => ethernet/dec}/tulip/Makefile (100%)
rename drivers/net/{ => ethernet/dec}/tulip/de2104x.c (100%)
rename drivers/net/{ => ethernet/dec}/tulip/de4x5.c (100%)
rename drivers/net/{ => ethernet/dec}/tulip/de4x5.h (100%)
rename drivers/net/{ => ethernet/dec}/tulip/dmfe.c (100%)
rename drivers/net/{ => ethernet/dec}/tulip/eeprom.c (100%)
rename drivers/net/{ => ethernet/dec}/tulip/interrupt.c (100%)
rename drivers/net/{ => ethernet/dec}/tulip/media.c (100%)
rename drivers/net/{ => ethernet/dec}/tulip/pnic.c (100%)
rename drivers/net/{ => ethernet/dec}/tulip/pnic2.c (100%)
rename drivers/net/{ => ethernet/dec}/tulip/timer.c (100%)
rename drivers/net/{ => ethernet/dec}/tulip/tulip.h (100%)
rename drivers/net/{ => ethernet/dec}/tulip/tulip_core.c (100%)
rename drivers/net/{ => ethernet/dec}/tulip/uli526x.c (100%)
rename drivers/net/{ => ethernet/dec}/tulip/winbond-840.c (100%)
rename drivers/net/{ => ethernet/dec}/tulip/xircom_cb.c (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 8cb244e..c1930ef6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2060,7 +2060,7 @@ DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER
L: netdev@vger.kernel.org
S: Orphan
F: Documentation/networking/dmfe.txt
-F: drivers/net/tulip/dmfe.c
+F: drivers/net/ethernet/tulip/dmfe.c
DC390/AM53C974 SCSI driver
M: Kurt Garloff <garloff@suse.de>
@@ -6336,7 +6336,7 @@ TULIP NETWORK DRIVERS
M: Grant Grundler <grundler@parisc-linux.org>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/tulip/
+F: drivers/net/ethernet/tulip/
TUN/TAP driver
M: Maxim Krasnyansky <maxk@qualcomm.com>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e6be7123..565b2fe 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -452,8 +452,6 @@ config DNET
To compile this driver as a module, choose M here: the module
will be called dnet.
-source "drivers/net/tulip/Kconfig"
-
config AT1700
tristate "AT1700/1720 support (EXPERIMENTAL)"
depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
@@ -494,20 +492,6 @@ config NET_ISA
the remaining ISA network card questions. If you say Y, you will be
asked for your specific card in the following questions.
-config EWRK3
- tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
- depends on NET_ISA
- select CRC32
- ---help---
- This driver supports the DE203, DE204 and DE205 network (Ethernet)
- cards. If this is for you, say Y and read
- <file:Documentation/networking/ewrk3.txt> in the kernel source as
- well as the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called ewrk3.
-
config ETH16I
tristate "ICL EtherTeam 16i/32 support"
depends on NET_ISA
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d151075..25f78c4 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -106,7 +106,6 @@ obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
obj-$(CONFIG_AT1700) += at1700.o
obj-$(CONFIG_CPMAC) += cpmac.o
-obj-$(CONFIG_EWRK3) += ewrk3.o
obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_EQUALIZER) += eql.o
@@ -147,7 +146,6 @@ obj-$(CONFIG_USB_IPHETH) += usb/
obj-$(CONFIG_USB_CDC_PHONET) += usb/
obj-$(CONFIG_WLAN) += wireless/
-obj-$(CONFIG_NET_TULIP) += tulip/
obj-$(CONFIG_HAMRADIO) += hamradio/
obj-$(CONFIG_IRDA) += irda/
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 9410f20..ed42850 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -19,6 +19,7 @@ source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
source "drivers/net/ethernet/cisco/Kconfig"
+source "drivers/net/ethernet/dec/Kconfig"
source "drivers/net/ethernet/dlink/Kconfig"
source "drivers/net/ethernet/emulex/Kconfig"
source "drivers/net/ethernet/neterion/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 5d89fd9..3de8249 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
+obj-$(CONFIG_NET_VENDOR_DEC) += dec/
obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
diff --git a/drivers/net/ethernet/dec/Kconfig b/drivers/net/ethernet/dec/Kconfig
new file mode 100644
index 0000000..6612048
--- /dev/null
+++ b/drivers/net/ethernet/dec/Kconfig
@@ -0,0 +1,30 @@
+#
+# Digital Equipment Inc network device configuration
+#
+
+config NET_VENDOR_DEC
+ bool "Digital Equipment devices"
+ depends on PCI || EISA || CARDBUS
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about DEC cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+config EWRK3
+ tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
+ depends on NET_VENDOR_DEC && ISA
+ select CRC32
+ ---help---
+ This driver supports the DE203, DE204 and DE205 network (Ethernet)
+ cards. If this is for you, say Y and read
+ <file:Documentation/networking/ewrk3.txt> in the kernel source as
+ well as the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ewrk3.
diff --git a/drivers/net/ethernet/dec/Makefile b/drivers/net/ethernet/dec/Makefile
new file mode 100644
index 0000000..1b01ed8
--- /dev/null
+++ b/drivers/net/ethernet/dec/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Digital Equipment Inc. network device drivers.
+#
+
+obj-$(CONFIG_EWRK3) += ewrk3.o
+obj-$(CONFIG_NET_TULIP) += tulip/
diff --git a/drivers/net/ewrk3.c b/drivers/net/ethernet/dec/ewrk3.c
similarity index 100%
rename from drivers/net/ewrk3.c
rename to drivers/net/ethernet/dec/ewrk3.c
diff --git a/drivers/net/ewrk3.h b/drivers/net/ethernet/dec/ewrk3.h
similarity index 100%
rename from drivers/net/ewrk3.h
rename to drivers/net/ethernet/dec/ewrk3.h
diff --git a/drivers/net/tulip/21142.c b/drivers/net/ethernet/dec/tulip/21142.c
similarity index 100%
rename from drivers/net/tulip/21142.c
rename to drivers/net/ethernet/dec/tulip/21142.c
diff --git a/drivers/net/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig
similarity index 93%
rename from drivers/net/tulip/Kconfig
rename to drivers/net/ethernet/dec/tulip/Kconfig
index 1f8d4a8..6e1fce5 100644
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/ethernet/dec/tulip/Kconfig
@@ -2,17 +2,15 @@
# Tulip family network device configuration
#
-menuconfig NET_TULIP
- bool "\"Tulip\" family network device support"
- depends on PCI || EISA || CARDBUS
- help
+config NET_TULIP
+ bool "DEC - Tulip devices"
+ depends on NET_VENDOR_DEC && (PCI || EISA || CARDBUS)
+ ---help---
This selects the "Tulip" family of EISA/PCI network cards.
-if NET_TULIP
-
config DE2104X
tristate "Early DECchip Tulip (dc2104x) PCI support"
- depends on PCI
+ depends on NET_TULIP && PCI
select CRC32
---help---
This driver is developed for the SMC EtherPower series Ethernet
@@ -32,7 +30,7 @@ config DE2104X_DSL
depends on DE2104X
range 0 31
default 0
- help
+ ---help---
Setting this value allows to align ring buffer descriptors into their
own cache lines. Value of 4 corresponds to the typical 32 byte line
(the descriptor is 16 bytes). This is necessary on systems that lack
@@ -41,7 +39,7 @@ config DE2104X_DSL
config TULIP
tristate "DECchip Tulip (dc2114x) PCI support"
- depends on PCI
+ depends on NET_TULIP && PCI
select CRC32
---help---
This driver is developed for the SMC EtherPower series Ethernet
@@ -59,7 +57,7 @@ config TULIP
config TULIP_MWI
bool "New bus configuration (EXPERIMENTAL)"
depends on TULIP && EXPERIMENTAL
- help
+ ---help---
This configures your Tulip card specifically for the card and
system cache line size type you are using.
@@ -70,7 +68,7 @@ config TULIP_MWI
config TULIP_MMIO
bool "Use PCI shared mem for NIC registers"
depends on TULIP
- help
+ ---help---
Use PCI shared memory for the NIC registers, rather than going through
the Tulip's PIO (programmed I/O ports). Faster, but could produce
obscure bugs if your mainboard has memory controller timing issues.
@@ -79,7 +77,7 @@ config TULIP_MMIO
config TULIP_NAPI
bool "Use RX polling (NAPI)"
depends on TULIP
- help
+ ---help---
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
still somewhat experimental and thus not yet enabled by default.
@@ -107,7 +105,7 @@ config TULIP_DM910X
config DE4X5
tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA"
- depends on PCI || EISA
+ depends on NET_TULIP && (PCI || EISA)
select CRC32
---help---
This is support for the DIGITAL series of PCI/EISA Ethernet cards.
@@ -123,10 +121,10 @@ config DE4X5
config WINBOND_840
tristate "Winbond W89c840 Ethernet support"
- depends on PCI
+ depends on NET_TULIP && PCI
select CRC32
select MII
- help
+ ---help---
This driver is for the Winbond W89c840 chip. It also works with
the TX9882 chip on the Compex RL100-ATX board.
More specific information and updates are available from
@@ -134,7 +132,7 @@ config WINBOND_840
config DM9102
tristate "Davicom DM910x/DM980x support"
- depends on PCI
+ depends on NET_TULIP && PCI
select CRC32
---help---
This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
@@ -147,7 +145,7 @@ config DM9102
config ULI526X
tristate "ULi M526x controller support"
- depends on PCI
+ depends on NET_TULIP && PCI
select CRC32
---help---
This driver is for ULi M5261/M5263 10/100M Ethernet Controller
@@ -158,7 +156,7 @@ config ULI526X
config PCMCIA_XIRCOM
tristate "Xircom CardBus support"
- depends on CARDBUS
+ depends on NET_TULIP && CARDBUS
---help---
This driver is for the Digital "Tulip" Ethernet CardBus adapters.
It should work with most DEC 21*4*-based chips/ethercards, as well
@@ -167,5 +165,3 @@ config PCMCIA_XIRCOM
To compile this driver as a module, choose M here. The module will
be called xircom_cb. If unsure, say N.
-
-endif # NET_TULIP
diff --git a/drivers/net/tulip/Makefile b/drivers/net/ethernet/dec/tulip/Makefile
similarity index 100%
rename from drivers/net/tulip/Makefile
rename to drivers/net/ethernet/dec/tulip/Makefile
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c
similarity index 100%
rename from drivers/net/tulip/de2104x.c
rename to drivers/net/ethernet/dec/tulip/de2104x.c
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
similarity index 100%
rename from drivers/net/tulip/de4x5.c
rename to drivers/net/ethernet/dec/tulip/de4x5.c
diff --git a/drivers/net/tulip/de4x5.h b/drivers/net/ethernet/dec/tulip/de4x5.h
similarity index 100%
rename from drivers/net/tulip/de4x5.h
rename to drivers/net/ethernet/dec/tulip/de4x5.h
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c
similarity index 100%
rename from drivers/net/tulip/dmfe.c
rename to drivers/net/ethernet/dec/tulip/dmfe.c
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/ethernet/dec/tulip/eeprom.c
similarity index 100%
rename from drivers/net/tulip/eeprom.c
rename to drivers/net/ethernet/dec/tulip/eeprom.c
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c
similarity index 100%
rename from drivers/net/tulip/interrupt.c
rename to drivers/net/ethernet/dec/tulip/interrupt.c
diff --git a/drivers/net/tulip/media.c b/drivers/net/ethernet/dec/tulip/media.c
similarity index 100%
rename from drivers/net/tulip/media.c
rename to drivers/net/ethernet/dec/tulip/media.c
diff --git a/drivers/net/tulip/pnic.c b/drivers/net/ethernet/dec/tulip/pnic.c
similarity index 100%
rename from drivers/net/tulip/pnic.c
rename to drivers/net/ethernet/dec/tulip/pnic.c
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/ethernet/dec/tulip/pnic2.c
similarity index 100%
rename from drivers/net/tulip/pnic2.c
rename to drivers/net/ethernet/dec/tulip/pnic2.c
diff --git a/drivers/net/tulip/timer.c b/drivers/net/ethernet/dec/tulip/timer.c
similarity index 100%
rename from drivers/net/tulip/timer.c
rename to drivers/net/ethernet/dec/tulip/timer.c
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/ethernet/dec/tulip/tulip.h
similarity index 100%
rename from drivers/net/tulip/tulip.h
rename to drivers/net/ethernet/dec/tulip/tulip.h
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/ethernet/dec/tulip/tulip_core.c
similarity index 100%
rename from drivers/net/tulip/tulip_core.c
rename to drivers/net/ethernet/dec/tulip/tulip_core.c
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/ethernet/dec/tulip/uli526x.c
similarity index 100%
rename from drivers/net/tulip/uli526x.c
rename to drivers/net/ethernet/dec/tulip/uli526x.c
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/ethernet/dec/tulip/winbond-840.c
similarity index 100%
rename from drivers/net/tulip/winbond-840.c
rename to drivers/net/ethernet/dec/tulip/winbond-840.c
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/ethernet/dec/tulip/xircom_cb.c
similarity index 100%
rename from drivers/net/tulip/xircom_cb.c
rename to drivers/net/ethernet/dec/tulip/xircom_cb.c
--
1.7.6
next prev parent reply other threads:[~2011-07-31 3:28 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-31 3:26 [RFC net-next v2 00/71] Organize/Move of the Ethernet drivers in drivers/net/ Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 01/71] drivers/net/ethernet: Add ethernet dir and config option Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 02/71] 3c*/acenic/typhoon: Move 3Com Ethernet drivers Jeff Kirsher
2011-08-01 9:03 ` Alan Cox
2011-08-01 9:21 ` David Miller
2011-08-01 9:42 ` Alan Cox
2011-08-01 20:15 ` Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 03/71] amd: Move AMD (Lance) chipset drivers Jeff Kirsher
2011-07-31 8:14 ` Geert Uytterhoeven
2011-07-31 8:30 ` Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 04/71] 8390: Move the 8390 related drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 05/71] broadcom: Move the Broadcom drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 06/71] chelsio: Move the Chelsio drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 07/71] intel: Move the Intel wired LAN drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 08/71] qlogic: Move the QLogic drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 09/71] smsc: Move the SMC (SMSC) drivers Jeff Kirsher
2011-07-31 7:17 ` Jeff Kirsher
2011-07-31 16:47 ` Nicolas Pitre
2011-08-01 6:09 ` Amit Salecha
2011-08-01 6:16 ` Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 10/71] i825xx: Move the Intel 82586/82593/82596 based drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 11/71] ni5010: Move the Racal-Interlan (Micom) driver Jeff Kirsher
2011-07-31 16:57 ` Andreas Mohr
2011-07-31 19:20 ` Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 12/71] cassini/niu/sun*: Move the Sun drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 13/71] sfc: Move the Solarflare drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 14/71] be2net: Move the Emulex driver Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 15/71] bna: Move the Brocade driver Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 16/71] mlx4: Move the Mellanox driver Jeff Kirsher
2011-08-01 13:10 ` Roland Dreier
2011-08-01 16:15 ` Eli Cohen
2011-07-31 3:26 ` [net-next v2 17/71] myri*: Move the Myricom drivers Jeff Kirsher
2011-08-01 17:09 ` Jon Mason
2011-08-03 6:02 ` Jeff Kirsher
2011-08-03 19:37 ` Jon Mason
2011-07-31 3:26 ` [net-next v2 18/71] s2io/vxge: Move the Exar drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 19/71] ehea/ibm*: Move the IBM drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 20/71] enic: Move the Cisco driver Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 21/71] pasemic_mac*: Move the PA Semi driver Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 22/71] tehuti: Move the Tehuti driver Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 23/71] stmmac: Move the STMicroelectronics driver Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 24/71] bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 25/71] *sonic/natsemi/ns83829: Move the National Semi-conductor drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 26/71] xscale: Move the Intel XScale IXP drivers Jeff Kirsher
2011-07-31 8:38 ` Lennert Buytenhek
2011-07-31 3:26 ` [net-next v2 27/71] ftgmac100/ftmac100: Move the Faraday drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 28/71] 8139*/atp/r8169/sc92031: Move the Realtek drivers Jeff Kirsher
2011-08-02 0:24 ` Ben Hutchings
2011-08-02 3:21 ` Jeff Garzik
2011-08-02 3:41 ` Jeff Kirsher
2011-08-02 3:48 ` David Miller
2011-08-02 3:58 ` Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 29/71] de6*/dl2k/sundance: Move the D-Link drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 30/71] atl*: Move the Atheros drivers Jeff Kirsher
2011-07-31 3:26 ` Jeff Kirsher [this message]
2011-07-31 3:26 ` [net-next v2 32/71] ioc3-eth/meth: Move the SGI drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 33/71] seeq: Move the SEEQ drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 34/71] pch_gbe: Move the OKI Semiconductor driver Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 35/71] skge/sky2/mv643xx/pxa168: Move the Marvell Ethernet drivers Jeff Kirsher
2011-07-31 22:11 ` Stephen Hemminger
2011-07-31 22:27 ` Joe Perches
2011-08-01 2:35 ` Jeff Kirsher
2011-08-01 2:43 ` Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 36/71] via-*: Move the VIA drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 37/71] eth16i: Move the Allied Telesis/Fujitsu drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 38/71] freescale: Move the Freescale drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 39/71] ks8*/ksz8*: Move the Micrel drivers Jeff Kirsher
2011-07-31 3:26 ` [net-next v2 40/71] toshiba: Move the Toshiba drivers Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 41/71] sis*: Move the Silicon Integrated Systems (SiS) drivers Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 42/71] cirrus: Move the Cirrus network driver Jeff Kirsher
2011-08-01 20:23 ` H Hartley Sweeten
2011-08-03 5:29 ` Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 43/71] nuvoton: Move the Nuvoton driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 44/71] tsi108*: Move the Tundra driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 45/71] s6gmac: Move the s6gmac drivers Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 46/71] davinci*/tlan/cpmac: Move the Texas Instruments (TI) drivers Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 47/71] hamachi/yellowfin: Move the packet engine drivers Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 48/71] octeon: Move the Cavium driver Jeff Kirsher
2011-08-02 22:48 ` David Daney
2011-08-03 4:59 ` Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 49/71] jme: Move the JME driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 50/71] xilinx/ll_temac: Move the Xilinx drivers Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 51/71] ipg: Move the IC Plus driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 52/71] korina: Move the IDT driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 53/71] mipsnet: Move the MIPS driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 54/71] lantiq: Move the Lantiq SoC driver Jeff Kirsher
2011-08-01 16:14 ` John Crispin
2011-07-31 3:27 ` [net-next v2 55/71] bfin_mac: Move the Analog Devices Inc driver Jeff Kirsher
2011-08-05 5:18 ` [uclinux-dist-devel] " Bob Liu
2011-07-31 3:27 ` [net-next v2 56/71] macb: Move the Atmel driver Jeff Kirsher
2011-08-01 14:41 ` Jamie Iles
2011-08-01 14:49 ` Nicolas Ferre
2011-08-03 5:59 ` Jeff Kirsher
2011-08-03 8:47 ` Jamie Iles
2011-08-03 8:50 ` Nicolas Ferre
2011-08-03 9:03 ` Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 57/71] r6040: Move the RDC driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 58/71] fealnx: Move the Myson driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 59/71] forcedeth: Move the NVIDIA nForce driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 60/71] starfire: Move the Adaptec driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 61/71] hp100: Move the HP driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 62/71] dnet: Move the Dave Ethernet driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 63/71] ethoc: Move the Avionic driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 64/71] greth: Move the Aeroflex Gaisler driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 65/71] enc28j60: Move the Microchip driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 66/71] dm9000: Move the Davicom driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 67/71] netx: Move the netx driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 68/71] sh_eth: Move the Renesas SuperH driver Jeff Kirsher
2011-07-31 3:27 ` [net-next v2 69/71] xircom: Move the Xircom driver Jeff Kirsher
2011-07-31 8:52 ` Dominik Brodowski
2011-07-31 3:27 ` [net-next v2 70/71] tile: Move the Tilera driver Jeff Kirsher
2011-08-01 17:21 ` Chris Metcalf
2011-08-02 3:53 ` Jeff Kirsher
2011-08-03 5:47 ` Jeff Kirsher
2011-08-03 19:02 ` Chris Metcalf
2011-07-31 3:27 ` [net-next v2 71/71] drivers/net: Kconfig and Makefile cleanup Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1312082850-24914-32-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=davies@maniac.ultranet.com \
--cc=gospo@redhat.com \
--cc=grundler@parisc-linux.org \
--cc=netdev@vger.kernel.org \
--cc=sassmann@redhat.com \
--cc=tori@unhappy.mine.nu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.