All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali.rohar@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 04/16] include/common.h: Add some ANSI escape codes definitions
Date: Sat, 17 Dec 2011 18:03:06 +0100	[thread overview]
Message-ID: <1324141398-14859-4-git-send-email-pali.rohar@gmail.com> (raw)
In-Reply-To: <1324141398-14859-1-git-send-email-pali.rohar@gmail.com>

Signed-off-by: Pali Roh?r <pali.rohar@gmail.com>
---
 include/common.h |   18 ++++++++++++++++++
 1 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/include/common.h b/include/common.h
index 5cfdd76..0a5e84e 100644
--- a/include/common.h
+++ b/include/common.h
@@ -760,6 +760,24 @@ void	clear_ctrlc (void);	/* clear the Control-C condition */
 int	disable_ctrlc (int);	/* 1 to disable, 0 to enable Control-C detect */
 
 /*
+ * ANSI terminal
+ */
+
+#define ANSI_CURSOR_UP			"\e[%dA"
+#define ANSI_CURSOR_DOWN		"\e[%dB"
+#define ANSI_CURSOR_FORWARD		"\e[%dC"
+#define ANSI_CURSOR_BACK		"\e[%dD"
+#define ANSI_CURSOR_NEXTLINE		"\e[%dE"
+#define ANSI_CURSOR_PREVIOUSLINE	"\e[%dF"
+#define ANSI_CURSOR_COLUMN		"\e[%dG"
+#define ANSI_CURSOR_POSITION		"\e[%d;%dH"
+#define ANSI_CLEAR_CONSOLE		"\e[2J"
+#define ANSI_CLEAR_LINE_TO_END		"\e[0K"
+#define ANSI_CLEAR_LINE			"\e[2K"
+#define ANSI_COLOR_RESET		"\e[0m"
+#define ANSI_COLOR_REVERSE		"\e[7m"
+
+/*
  * STDIO based functions (can always be used)
  */
 /* serial stuff */
-- 
1.7.5.4

  parent reply	other threads:[~2011-12-17 17:03 UTC|newest]

Thread overview: 111+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-01  8:42 [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900) Pali Rohár
2011-09-01  8:46 ` Marek Vasut
2011-09-01  9:06   ` Pali Rohár
2011-09-01  9:39     ` Marek Vasut
2011-09-01  9:02 ` Stefano Babic
2011-09-01  9:09   ` Pali Rohár
2011-09-01  9:24     ` Stefano Babic
2011-09-01 10:49       ` Pali Rohár
2011-09-01 11:04         ` Marek Vasut
2011-09-01 11:34           ` [U-Boot] [PATCH 01/15] Make bootm optionally use pre-existing atags for Linux kernel boot Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 02/15] Store existing atags at startup if chainloading Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 03/15] Nokia RX-51 aka N900 support Pali Rohár
2011-09-01 13:57               ` Mike Frysinger
2011-10-09  0:20                 ` Pali Rohár
2011-10-09 15:59                   ` Mike Frysinger
2011-10-12 15:10                     ` Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 04/15] Only delay boot if keyboard open Pali Rohár
2011-09-01 13:58               ` Mike Frysinger
2011-10-08 23:29                 ` Pali Rohár
2011-10-09 16:00                   ` Mike Frysinger
2011-09-01 11:34             ` [U-Boot] [PATCH 05/15] Change Wireless LAN mode from M4 to M0 Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 06/15] Look for boot.scr on 'mmc 0:3' instead 'mmc 0' and add support for loading boot.scr from 'mmc 2:1' Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 07/15] RX-51: Fixed compilation on top of master (changes from Beagle Board) Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 08/15] RX-51: Add support for resetting twl4030 watchdog Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 09/15] RX-51: Fix keymap Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 10/15] include/common.h: Add some macros for ANSI escape codes Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 11/15] drivers/video/cfb_console.c: Added support " Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 12/15] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-09-01 13:59               ` Mike Frysinger
2011-10-08 23:31                 ` Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 13/15] New config variable CONFIG_MENU Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 14/15] New config variable CONFIG_PREMONITOR Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu Pali Rohár
2011-09-01 13:52             ` [U-Boot] [PATCH 01/15] Make bootm optionally use pre-existing atags for Linux kernel boot Mike Frysinger
2011-10-08 23:37               ` Pali Rohár
2011-09-01 11:53         ` [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-10-09  0:24           ` Pali Rohár
2011-09-01 17:11 ` Pali Rohár
2011-12-17 16:59 ` [U-Boot] " Pali Rohár
2011-12-17 17:03   ` [U-Boot] [PATCH 01/16] arch/arm/cpu/armv7/omap3/lowlevel_init.S: save_boot_params Pali Rohár
2011-12-17 17:03     ` [U-Boot] [PATCH 02/16] arch/arm/lib/bootm.c: Optionally use existing atags Pali Rohár
2011-12-18 18:54       ` Mike Frysinger
2011-12-18 20:12         ` Pali Rohár
2011-12-17 17:03     ` [U-Boot] [PATCH 03/16] include/twl4030.h: Add power bus message definitions Pali Rohár
2011-12-17 17:03     ` Pali Rohár [this message]
2011-12-17 17:03     ` [U-Boot] [PATCH 05/16] common/main.c: Fix function readline Pali Rohár
2011-12-18 18:58       ` Mike Frysinger
2011-12-18 20:12         ` Pali Rohár
2011-12-17 17:03     ` [U-Boot] [PATCH 06/16] drivers/video/cfb_console.c: Fix function console_scrollup Pali Rohár
2011-12-17 17:03     ` [U-Boot] [PATCH 07/16] drivers/video/cfb_console.c: Add function console_swap_colors Pali Rohár
2011-12-18 18:57       ` Mike Frysinger
2011-12-18 19:00         ` Pali Rohár
2011-12-18 20:06           ` Mike Frysinger
2011-12-17 17:03     ` [U-Boot] [PATCH 08/16] drivers/video/cfb_console.c: Add function console_clear and console_clear_line Pali Rohár
2011-12-18 19:00       ` Mike Frysinger
2011-12-17 17:03     ` [U-Boot] [PATCH 09/16] drivers/video/cfb_console.c: Add functions for moving with cursor Pali Rohár
2011-12-18 19:00       ` Mike Frysinger
2011-12-17 17:03     ` [U-Boot] [PATCH 10/16] drivers/video/cfb_console.c: Add support for some ANSI terminal escape codes Pali Rohár
2011-12-18 19:01       ` Mike Frysinger
2011-12-17 17:03     ` [U-Boot] [PATCH 11/16] New command clr: Clear the ANSI terminal Pali Rohár
2011-12-18 18:56       ` Mike Frysinger
2011-12-18 19:20         ` Pali Rohár
2011-12-18 20:07           ` Mike Frysinger
2011-12-17 17:03     ` [U-Boot] [PATCH 12/16] New config variable CONFIG_MENUCMD Pali Rohár
2011-12-17 17:03     ` [U-Boot] [PATCH 13/16] New config variable CONFIG_PREMONITOR Pali Rohár
2011-12-18 19:05       ` Mike Frysinger
2011-12-18 19:37         ` Pali Rohár
2011-12-18 20:08           ` Mike Frysinger
2011-12-18 20:14             ` Pali Rohár
2011-12-17 17:03     ` [U-Boot] [PATCH 14/16] New board support: Nokia RX-51 aka N900 Pali Rohár
2011-12-18 19:06       ` Mike Frysinger
2011-12-17 17:03     ` [U-Boot] [PATCH 15/16] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-12-18 19:07       ` Mike Frysinger
2011-12-18 19:12         ` Pali Rohár
2011-12-18 20:07           ` Mike Frysinger
2011-12-18 20:16             ` Pali Rohár
2012-01-06  6:59               ` Mike Frysinger
2011-12-17 17:03     ` [U-Boot] [PATCH 16/16] RX-51: Add support for bootmenu Pali Rohár
2011-12-17 19:25   ` [U-Boot] U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-12-18 10:13     ` Pali Rohár
2011-12-18 12:42       ` Wolfgang Denk
2011-12-18 19:01   ` Mike Frysinger
2011-12-18 20:10     ` Pali Rohár
2011-12-18 21:33   ` [U-Boot] [PATCH v3] " Pali Rohár
2011-12-18 21:33     ` [U-Boot] [PATCH 01/15] arch/arm/cpu/armv7/omap3/lowlevel_init.S: save_boot_params Pali Rohár
2011-12-18 21:33       ` [U-Boot] [PATCH 02/15] arch/arm/lib/bootm.c: Optionally use existing atags Pali Rohár
2011-12-18 21:33       ` [U-Boot] [PATCH 03/15] include/twl4030.h: Add power bus message definitions Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 04/15] include/common.h: Add some ANSI escape codes definitions Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 05/15] common/main.c: Fix function readline Pali Rohár
2012-01-06 20:15         ` Mike Frysinger
2012-01-07  8:51           ` Pali Rohár
2012-02-27  4:33             ` Mike Frysinger
2012-02-27 18:40               ` Pali Rohár
2012-02-27 20:20                 ` Mike Frysinger
2011-12-18 21:34       ` [U-Boot] [PATCH 06/15] drivers/video/cfb_console.c: Fix function console_scrollup Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 07/15] drivers/video/cfb_console.c: Add function console_clear and console_clear_line Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 08/15] drivers/video/cfb_console.c: Add functions for moving with cursor Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 09/15] drivers/video/cfb_console.c: Add support for some ANSI terminal escape codes Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 10/15] New command clear: Clear the ANSI terminal Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 11/15] New config variable CONFIG_MENUCMD Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 12/15] New config variable CONFIG_PREMONITOR Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 13/15] New board support: Nokia RX-51 aka N900 Pali Rohár
2012-01-03 16:05         ` Tom Rini
2012-01-10 13:14           ` Pali Rohár
2012-01-10 14:53             ` Tom Rini
2011-12-18 21:34       ` [U-Boot] [PATCH 14/15] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu Pali Rohár
2012-01-03 16:06         ` Tom Rini
2011-12-18 23:57     ` [U-Boot] [PATCH v3] U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-12-19  7:17       ` Pali Rohár
2011-12-19  8:43         ` Graeme Russ

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1324141398-14859-4-git-send-email-pali.rohar@gmail.com \
    --to=pali.rohar@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.