From: Tom Rini <tom.rini@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 13/15] New board support: Nokia RX-51 aka N900
Date: Tue, 10 Jan 2012 07:53:40 -0700 [thread overview]
Message-ID: <CA+M6bXnq2KF8KuPqErf92tYivxo0tyC9kQ_G3KCMGa0Y+kefpA@mail.gmail.com> (raw)
In-Reply-To: <1371135.5S9UhYtKBZ@pali-elitebook>
On Tue, Jan 10, 2012 at 6:14 AM, Pali Roh?r <pali.rohar@gmail.com> wrote:
> On Tuesday 03 January 2012 09:05:17 Tom Rini wrote:
>> On Sun, Dec 18, 2011 at 2:34 PM, Pali Roh?r <pali.rohar@gmail.com> wrote:
>> > This board definition results in a u-boot.bin which can be chainloaded
>> > from NOLO in qemu or on a real N900. It does very little hardware config
>> > because NOLO has already configured the board. Only needed is enabling
>> > internal eMMC memory via twl4030 regulator which is not enabled by NOLO.
[snip]
>> [snip]
>>
>> > +/*
>> > + * High Level Configuration Options
>> > + */
>> > +
>> > +#define CONFIG_ARMV7 ? ? ? ? ? ? ? ? ? /* This is an ARM V7 CPU core */
>>
>> This isn't used.
>>
>> > +#define CONFIG_L2_OFF ? ? ? ? ? ? ? ? ?/* kernel won't boot if l2 enabled
>> > */
>> This isn't correct for disabling L2 now and doesn't do anything. ?So
>> L2 is probably enabled :)
>
> and #define CONFIG_SYS_L2CACHE_OFF is correct?
Yes.
[snip]
>> > +/*-----------------------------------------------------------------------
>> > + * Physical Memory Map
>> > + */
>> > +#define CONFIG_NR_DRAM_BANKS ? ? ? ? ? 2 /* CS1 may or may not be
>> > populated */ +#define PHYS_SDRAM_1 ? ? ? ? ? ? ? ? ? OMAP34XX_SDRC_CS0
>> > +#define PHYS_SDRAM_2 ? ? ? ? ? ? ? ? ? OMAP34XX_SDRC_CS1
>> > +
>> > +/* SDRAM Bank Allocation method */
>> > +#define SDRC_R_B_C ? ? ? ? ? ? ? ? ? ? 1
>>
>> And I'm not sure if any of these are really needed now.
>>
>
> When I deleted this code, I cannot compile U-Boot. Here is error message:
> include/asm/u-boot.h:48:17: error: ?CONFIG_NR_DRAM_BANKS? undeclared here (not
> in a function)
I just meant the SDRC_R_B_C part, sorry.
--
Tom
next prev parent reply other threads:[~2012-01-10 14:53 UTC|newest]
Thread overview: 111+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-01 8:42 [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900) Pali Rohár
2011-09-01 8:46 ` Marek Vasut
2011-09-01 9:06 ` Pali Rohár
2011-09-01 9:39 ` Marek Vasut
2011-09-01 9:02 ` Stefano Babic
2011-09-01 9:09 ` Pali Rohár
2011-09-01 9:24 ` Stefano Babic
2011-09-01 10:49 ` Pali Rohár
2011-09-01 11:04 ` Marek Vasut
2011-09-01 11:34 ` [U-Boot] [PATCH 01/15] Make bootm optionally use pre-existing atags for Linux kernel boot Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 02/15] Store existing atags at startup if chainloading Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 03/15] Nokia RX-51 aka N900 support Pali Rohár
2011-09-01 13:57 ` Mike Frysinger
2011-10-09 0:20 ` Pali Rohár
2011-10-09 15:59 ` Mike Frysinger
2011-10-12 15:10 ` Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 04/15] Only delay boot if keyboard open Pali Rohár
2011-09-01 13:58 ` Mike Frysinger
2011-10-08 23:29 ` Pali Rohár
2011-10-09 16:00 ` Mike Frysinger
2011-09-01 11:34 ` [U-Boot] [PATCH 05/15] Change Wireless LAN mode from M4 to M0 Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 06/15] Look for boot.scr on 'mmc 0:3' instead 'mmc 0' and add support for loading boot.scr from 'mmc 2:1' Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 07/15] RX-51: Fixed compilation on top of master (changes from Beagle Board) Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 08/15] RX-51: Add support for resetting twl4030 watchdog Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 09/15] RX-51: Fix keymap Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 10/15] include/common.h: Add some macros for ANSI escape codes Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 11/15] drivers/video/cfb_console.c: Added support " Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 12/15] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-09-01 13:59 ` Mike Frysinger
2011-10-08 23:31 ` Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 13/15] New config variable CONFIG_MENU Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 14/15] New config variable CONFIG_PREMONITOR Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu Pali Rohár
2011-09-01 13:52 ` [U-Boot] [PATCH 01/15] Make bootm optionally use pre-existing atags for Linux kernel boot Mike Frysinger
2011-10-08 23:37 ` Pali Rohár
2011-09-01 11:53 ` [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-10-09 0:24 ` Pali Rohár
2011-09-01 17:11 ` Pali Rohár
2011-12-17 16:59 ` [U-Boot] " Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 01/16] arch/arm/cpu/armv7/omap3/lowlevel_init.S: save_boot_params Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 02/16] arch/arm/lib/bootm.c: Optionally use existing atags Pali Rohár
2011-12-18 18:54 ` Mike Frysinger
2011-12-18 20:12 ` Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 03/16] include/twl4030.h: Add power bus message definitions Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 04/16] include/common.h: Add some ANSI escape codes definitions Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 05/16] common/main.c: Fix function readline Pali Rohár
2011-12-18 18:58 ` Mike Frysinger
2011-12-18 20:12 ` Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 06/16] drivers/video/cfb_console.c: Fix function console_scrollup Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 07/16] drivers/video/cfb_console.c: Add function console_swap_colors Pali Rohár
2011-12-18 18:57 ` Mike Frysinger
2011-12-18 19:00 ` Pali Rohár
2011-12-18 20:06 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 08/16] drivers/video/cfb_console.c: Add function console_clear and console_clear_line Pali Rohár
2011-12-18 19:00 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 09/16] drivers/video/cfb_console.c: Add functions for moving with cursor Pali Rohár
2011-12-18 19:00 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 10/16] drivers/video/cfb_console.c: Add support for some ANSI terminal escape codes Pali Rohár
2011-12-18 19:01 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 11/16] New command clr: Clear the ANSI terminal Pali Rohár
2011-12-18 18:56 ` Mike Frysinger
2011-12-18 19:20 ` Pali Rohár
2011-12-18 20:07 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 12/16] New config variable CONFIG_MENUCMD Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 13/16] New config variable CONFIG_PREMONITOR Pali Rohár
2011-12-18 19:05 ` Mike Frysinger
2011-12-18 19:37 ` Pali Rohár
2011-12-18 20:08 ` Mike Frysinger
2011-12-18 20:14 ` Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 14/16] New board support: Nokia RX-51 aka N900 Pali Rohár
2011-12-18 19:06 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 15/16] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-12-18 19:07 ` Mike Frysinger
2011-12-18 19:12 ` Pali Rohár
2011-12-18 20:07 ` Mike Frysinger
2011-12-18 20:16 ` Pali Rohár
2012-01-06 6:59 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 16/16] RX-51: Add support for bootmenu Pali Rohár
2011-12-17 19:25 ` [U-Boot] U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-12-18 10:13 ` Pali Rohár
2011-12-18 12:42 ` Wolfgang Denk
2011-12-18 19:01 ` Mike Frysinger
2011-12-18 20:10 ` Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH v3] " Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH 01/15] arch/arm/cpu/armv7/omap3/lowlevel_init.S: save_boot_params Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH 02/15] arch/arm/lib/bootm.c: Optionally use existing atags Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH 03/15] include/twl4030.h: Add power bus message definitions Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 04/15] include/common.h: Add some ANSI escape codes definitions Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 05/15] common/main.c: Fix function readline Pali Rohár
2012-01-06 20:15 ` Mike Frysinger
2012-01-07 8:51 ` Pali Rohár
2012-02-27 4:33 ` Mike Frysinger
2012-02-27 18:40 ` Pali Rohár
2012-02-27 20:20 ` Mike Frysinger
2011-12-18 21:34 ` [U-Boot] [PATCH 06/15] drivers/video/cfb_console.c: Fix function console_scrollup Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 07/15] drivers/video/cfb_console.c: Add function console_clear and console_clear_line Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 08/15] drivers/video/cfb_console.c: Add functions for moving with cursor Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 09/15] drivers/video/cfb_console.c: Add support for some ANSI terminal escape codes Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 10/15] New command clear: Clear the ANSI terminal Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 11/15] New config variable CONFIG_MENUCMD Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 12/15] New config variable CONFIG_PREMONITOR Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 13/15] New board support: Nokia RX-51 aka N900 Pali Rohár
2012-01-03 16:05 ` Tom Rini
2012-01-10 13:14 ` Pali Rohár
2012-01-10 14:53 ` Tom Rini [this message]
2011-12-18 21:34 ` [U-Boot] [PATCH 14/15] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu Pali Rohár
2012-01-03 16:06 ` Tom Rini
2011-12-18 23:57 ` [U-Boot] [PATCH v3] U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-12-19 7:17 ` Pali Rohár
2011-12-19 8:43 ` Graeme Russ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CA+M6bXnq2KF8KuPqErf92tYivxo0tyC9kQ_G3KCMGa0Y+kefpA@mail.gmail.com \
--to=tom.rini@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.