All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali.rohar@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] U-Boot on Nokia RX-51 (aka N900)
Date: Sun, 18 Dec 2011 11:13:25 +0100	[thread overview]
Message-ID: <17199828.H8TsXDWnq5@pali-elitebook> (raw)
In-Reply-To: <20111217192524.CA824138EEA1@gemini.denx.de>

On Saturday 17 December 2011 20:25:24 Wolfgang Denk wrote:
> Dear Pali =?ISO-8859-1?Q?Roh=E1r?=,
> 
> In message <2772527.Czs1Sl5aoH@pali-elitebook> you wrote:
> > I'm sending new patch series, which add Nokia RX-51 support to U-Boot.
> > This
> > patches are based on master commit 06e42c6e2ce269667daecd6229d0b7c81383
> > 8203
> > and now U-Boot working on Nokia RX-51.
> 
> This patch series generates a ton of checkpatch warnings.  Please run
> your code through checkpatch, and make sure to read the respective
> hits at http://www.denx.de/wiki/U-Boot/Patches ; then clean up the
> code and resubmit.
> 
> Um, and while doing so, please make sure NOT to send all this stuff
> base64 encoded.  Thanks.
> 
> WARNING: space prohibited between function name and open parenthesis '('
> #130: FILE: arch/arm/lib/bootm.c:128:
> +	s = getenv ("atagaddr");

see file arch/arm/lib/bootm.c - it has this code styling. so this is not error 
unless you want to mix more code styling in one file.

> 
> WARNING: consider using kstrto* in preference to simple_strtoul
> #132: FILE: arch/arm/lib/bootm.c:130:
> +		bd->bi_boot_params = simple_strtoul(s, NULL, 16);

really? I was not able to find kstrtoul function

> 
> WARNING: space prohibited between function name and open parenthesis '('
> #137: FILE: arch/arm/lib/bootm.c:135:
> +			params = tag_next (params);
> 
> WARNING: space prohibited between function name and open parenthesis '('
> #145: FILE: arch/arm/lib/bootm.c:142:
> +		setup_start_tag (bd);
> 
> WARNING: space prohibited between function name and open parenthesis '('
> #162: FILE: arch/arm/lib/bootm.c:167:
> +#if defined (CONFIG_SETUP_MEMORY_TAGS) || \
> 
> WARNING: please, no spaces at the start of a line
> #163: FILE: arch/arm/lib/bootm.c:168:
> +    defined (CONFIG_CMDLINE_TAG) || \$
> 
> WARNING: space prohibited between function name and open parenthesis '('
> #163: FILE: arch/arm/lib/bootm.c:168:
> +    defined (CONFIG_CMDLINE_TAG) || \
> 
> WARNING: please, no spaces at the start of a line
> #164: FILE: arch/arm/lib/bootm.c:169:
> +    defined (CONFIG_INITRD_TAG) || \$
> 
> WARNING: space prohibited between function name and open parenthesis '('
> #164: FILE: arch/arm/lib/bootm.c:169:
> +    defined (CONFIG_INITRD_TAG) || \
> 
> WARNING: please, no spaces at the start of a line
> #165: FILE: arch/arm/lib/bootm.c:170:
> +    defined (CONFIG_SERIAL_TAG) || \$
> 
> WARNING: space prohibited between function name and open parenthesis '('
> #165: FILE: arch/arm/lib/bootm.c:170:
> +    defined (CONFIG_SERIAL_TAG) || \
> 
> WARNING: please, no spaces at the start of a line
> #166: FILE: arch/arm/lib/bootm.c:171:
> +    defined (CONFIG_REVISION_TAG)$
> 
> WARNING: space prohibited between function name and open parenthesis '('
> #166: FILE: arch/arm/lib/bootm.c:171:
> +    defined (CONFIG_REVISION_TAG)
> 
> total: 0 errors, 13 warnings, 53 lines checked
> 
> /home/wd/Mail/U-Boot/12777 has style problems, please review.

same - see my first comment

> 
> If any of these errors are false positives, please report
> them to the maintainer, see CHECKPATCH in MAINTAINERS.
> ERROR: space prohibited after that open parenthesis '('
> #194: FILE: include/twl4030.h:238:
> +	( (devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \
> 
> total: 1 errors, 0 warnings, 110 lines checked
> 
> /home/wd/Mail/U-Boot/12778 has style problems, please review.

see commit message - this patch is from linux upstream and uf u-boot has same 
styling this should be ok too.

> 
> If any of these errors are false positives, please report
> them to the maintainer, see CHECKPATCH in MAINTAINERS.
> total: 0 errors, 0 warnings, 24 lines checked
> 
> /home/wd/Mail/U-Boot/12779 has no obvious style problems and is ready for
> submission. WARNING: line over 80 characters
> #117: FILE: common/main.c:1028:
> +		case '\e':				/* ANSI escape char	*/

again - same formating in file common/main.c

> 
> WARNING: line over 80 characters
> #145: FILE: common/main.c:1056:
> +				/* Ignore ANSI escape sequences generated by keyboard */
> 
> ERROR: space prohibited after that open parenthesis '('
> #147: FILE: common/main.c:1058:
> +				if ( c >= 'A' && c <= 'D' ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #147: FILE: common/main.c:1058:
> +				if ( c >= 'A' && c <= 'D' ) {

Ok, this problem I fix.

> 
> WARNING: line over 80 characters
> #156: FILE: common/main.c:1067:
> +				} else if (esc == 3 && n < CONFIG_SYS_CBSIZE-4) {
> 
> total: 2 errors, 3 warnings, 62 lines checked
> 
> /home/wd/Mail/U-Boot/12780 has style problems, please review.
> 
> If any of these errors are false positives, please report
> them to the maintainer, see CHECKPATCH in MAINTAINERS.
> total: 0 errors, 0 warnings, 8 lines checked
> 
> /home/wd/Mail/U-Boot/12781 has no obvious style problems and is ready for
> submission. WARNING: line over 80 characters
> #129: FILE: drivers/video/cfb_console.c:712:
> +	video_hw_rectfill(VIDEO_PIXEL_SIZE,				/* bytes per pixel */
> 
> WARNING: line over 80 characters
> #130: FILE: drivers/video/cfb_console.c:713:
> +			  VIDEO_FONT_WIDTH * begin,			/* dest pos x */  /* FIXME: 
correct? */
> 
> WARNING: line over 80 characters
> #131: FILE: drivers/video/cfb_console.c:714:
> +			  video_logo_height + CONSOLE_ROW_SIZE * line,	/* dest pos y */  
/*
> FIXME: correct? */
> 
> WARNING: line over 80 characters
> #132: FILE: drivers/video/cfb_console.c:715:
> +			  VIDEO_FONT_WIDTH * ( end - begin ),		/* frame width */ /* 
FIXME:
> correct? */
> 
> ERROR: space prohibited after that open parenthesis '('
> #132: FILE: drivers/video/cfb_console.c:715:
> +			  VIDEO_FONT_WIDTH * ( end - begin ),		/* frame width */ /* 
FIXME:
> correct? */
> 
> ERROR: space prohibited before that close parenthesis ')'
> #132: FILE: drivers/video/cfb_console.c:715:
> +			  VIDEO_FONT_WIDTH * ( end - begin ),		/* frame width */ /* 
FIXME:
> correct? */
> 
> WARNING: line over 80 characters
> #133: FILE: drivers/video/cfb_console.c:716:
> +			  VIDEO_FONT_HEIGHT,				/* frame height */
> 
> WARNING: line over 80 characters
> #134: FILE: drivers/video/cfb_console.c:717:
> +			  bgx						/* fill color */

If you want I remove above comments /* ... */

> 
> ERROR: space prohibited after that open parenthesis '('
> #138: FILE: drivers/video/cfb_console.c:721:
> +	if ( begin == 0 && end == CONSOLE_COLS )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #138: FILE: drivers/video/cfb_console.c:721:
> +	if ( begin == 0 && end == CONSOLE_COLS )

I will fix this.

> 
> WARNING: line over 80 characters
> #139: FILE: drivers/video/cfb_console.c:722:
> +		memsetl(CONSOLE_ROW_FIRST + CONSOLE_ROW_SIZE * line,	/* offset of row 
*/
> 
> WARNING: line over 80 characters
> #140: FILE: drivers/video/cfb_console.c:723:
> +			CONSOLE_ROW_SIZE >> 2,				/* length of row */
> 
> WARNING: line over 80 characters
> #141: FILE: drivers/video/cfb_console.c:724:
> +			bgx						/* fill color */
> 
> ERROR: space prohibited after that open parenthesis '('
> #144: FILE: drivers/video/cfb_console.c:727:
> +		for ( i = 0; i < VIDEO_FONT_HEIGHT; ++i )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #144: FILE: drivers/video/cfb_console.c:727:
> +		for ( i = 0; i < VIDEO_FONT_HEIGHT; ++i )

Also I fix this.

> 
> WARNING: line over 80 characters
> #145: FILE: drivers/video/cfb_console.c:728:
> +			memsetl(CONSOLE_ROW_FIRST + CONSOLE_ROW_SIZE * line +	/* offset of 
row
> */
> 
> WARNING: line over 80 characters
> #146: FILE: drivers/video/cfb_console.c:729:
> +				VIDEO_FONT_WIDTH * VIDEO_PIXEL_SIZE * begin +	/* offset of 
col */
> 
> WARNING: line over 80 characters
> #147: FILE: drivers/video/cfb_console.c:730:
> +				i * VIDEO_LINE_LEN,				/* col offset of i-th line */
> 
> WARNING: line over 80 characters
> #148: FILE: drivers/video/cfb_console.c:731:
> +				(VIDEO_FONT_WIDTH * VIDEO_PIXEL_SIZE * ( end - begin + 1)) >> 
2, /*
> length to end of line */
> 
> ERROR: space prohibited after that open parenthesis '('
> #148: FILE: drivers/video/cfb_console.c:731:
> +				(VIDEO_FONT_WIDTH * VIDEO_PIXEL_SIZE * ( end - begin + 1)) >> 
2, /*
> length to end of line */
> 
> WARNING: line over 80 characters
> #149: FILE: drivers/video/cfb_console.c:732:
> +				bgx						/* fill color */
> 
> total: 7 errors, 14 warnings, 68 lines checked
> 
> /home/wd/Mail/U-Boot/12782 has style problems, please review.
> 
> If any of these errors are false positives, please report
> them to the maintainer, see CHECKPATCH in MAINTAINERS.
> total: 0 errors, 0 warnings, 98 lines checked
> 
> /home/wd/Mail/U-Boot/12783 has no obvious style problems and is ready for
> submission. ERROR: do not initialise statics to 0 or NULL
> #112: FILE: drivers/video/cfb_console.c:381:
> +static int ansi_buf_size = 0;
> 
> ERROR: do not initialise statics to 0 or NULL
> #113: FILE: drivers/video/cfb_console.c:382:
> +static int ansi_colors_need_revert = 0;

what is problem with initialising to 0?

> 
> WARNING: space prohibited between function name and open parenthesis '('
> #166: FILE: drivers/video/cfb_console.c:930:
> +		if (ansi_buf_size >= sizeof (ansi_buf))
> 
> WARNING: line over 80 characters
> #236: FILE: drivers/video/cfb_console.c:1000:
> +				if ((ansi_buf[i] >= 'A' && ansi_buf[i] <= 'H') || ansi_buf[i] 
== 'J' ||
> ansi_buf[i] == 'K' || ansi_buf[i] == 'm') {
> 
> ERROR: that open brace { should be on the previous line
> #245: FILE: drivers/video/cfb_console.c:1009:
> +		if (fail)
> +		{
> 
> ERROR: that open brace { should be on the previous line
> #253: FILE: drivers/video/cfb_console.c:1017:
> +		if (flush)
> +		{

Also I will fix above problems with braces.

> 
> WARNING: line over 80 characters
> #298: FILE: drivers/video/cfb_console.c:1062:
> +					console_clear_line(console_row, console_col, 
CONSOLE_COLS-1);
> 
> WARNING: line over 80 characters
> #300: FILE: drivers/video/cfb_console.c:1064:
> +					console_clear_line(console_row, 0, console_col);
> 
> WARNING: line over 80 characters
> #302: FILE: drivers/video/cfb_console.c:1066:
> +					console_clear_line(console_row, 0, CONSOLE_COLS-1);
> 
> WARNING: line over 80 characters
> #310: FILE: drivers/video/cfb_console.c:1074:
> +				} else if (num1 == 7) { /* swap colors (only once) */
> 
> ERROR: that open brace { should be on the previous line
> #321: FILE: drivers/video/cfb_console.c:1085:
> +	else
> +	{
> 
> ERROR: else should follow close brace '}'
> #321: FILE: drivers/video/cfb_console.c:1085:
> +	}
> +	else
> 
> total: 6 errors, 6 warnings, 223 lines checked
> 
> /home/wd/Mail/U-Boot/12784 has style problems, please review.
> 
> If any of these errors are false positives, please report
> them to the maintainer, see CHECKPATCH in MAINTAINERS.
> total: 0 errors, 0 warnings, 14 lines checked
> 
> /home/wd/Mail/U-Boot/12785 has no obvious style problems and is ready for
> submission. total: 0 errors, 0 warnings, 52 lines checked
> 
> /home/wd/Mail/U-Boot/12786 has no obvious style problems and is ready for
> submission. WARNING: line over 80 characters
> #113: FILE: common/main.c:85:
> +#if defined (CONFIG_MENUKEY) && ! defined (CONFIG_MENUCMD) && ( !
> defined(CONFIG_BOOTDELAY) || CONFIG_BOOTDELAY < 0 )
> 
> WARNING: space prohibited between function name and open parenthesis '('
> #113: FILE: common/main.c:85:
> +#if defined (CONFIG_MENUKEY) && ! defined (CONFIG_MENUCMD) && ( !
> defined(CONFIG_BOOTDELAY) || CONFIG_BOOTDELAY < 0 )
> 
> WARNING: space prohibited between function name and open parenthesis '('
> #113: FILE: common/main.c:85:
> +#if defined (CONFIG_MENUKEY) && ! defined (CONFIG_MENUCMD) && ( !
> defined(CONFIG_BOOTDELAY) || CONFIG_BOOTDELAY < 0 )
> 
> ERROR: space prohibited after that '!' (ctx:WxW)
> #113: FILE: common/main.c:85:
> +#if defined (CONFIG_MENUKEY) && ! defined (CONFIG_MENUCMD) && ( !
> defined(CONFIG_BOOTDELAY) || CONFIG_BOOTDELAY < 0 ) ^
> 
> ERROR: space prohibited after that '!' (ctx:WxW)
> #113: FILE: common/main.c:85:
> +#if defined (CONFIG_MENUKEY) && ! defined (CONFIG_MENUCMD) && ( !
> defined(CONFIG_BOOTDELAY) || CONFIG_BOOTDELAY < 0 ) ^
> 
> ERROR: space prohibited after that open parenthesis '('
> #113: FILE: common/main.c:85:
> +#if defined (CONFIG_MENUKEY) && ! defined (CONFIG_MENUCMD) && ( !
> defined(CONFIG_BOOTDELAY) || CONFIG_BOOTDELAY < 0 )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #113: FILE: common/main.c:85:
> +#if defined (CONFIG_MENUKEY) && ! defined (CONFIG_MENUCMD) && ( !
> defined(CONFIG_BOOTDELAY) || CONFIG_BOOTDELAY < 0 )
> 
> WARNING: line over 80 characters
> #114: FILE: common/main.c:86:
> +#error CONFIG_MENUKEY is defined, but not CONFIG_MENUCMD and/or
> CONFIG_BOOTDELAY >= 0
> 
> ERROR: do not initialise statics to 0 or NULL
> #120: FILE: common/main.c:92:
> +static int menucmd = 0;
> 
> WARNING: space prohibited between function name and open parenthesis '('
> #146: FILE: common/main.c:253:
> +# if defined (CONFIG_MENUCMD) && defined (CONFIG_MENUKEY)
> 
> WARNING: space prohibited between function name and open parenthesis '('
> #146: FILE: common/main.c:253:
> +# if defined (CONFIG_MENUCMD) && defined (CONFIG_MENUKEY)
> 
> WARNING: line over 80 characters
> #147: FILE: common/main.c:254:
> +				if (CONFIG_MENUKEY == 0 || CONFIG_MENUKEY == getc())
> 
> total: 5 errors, 7 warnings, 73 lines checked
> 
> /home/wd/Mail/U-Boot/12787 has style problems, please review.

Ok, I will fix this file.

> 
> If any of these errors are false positives, please report
> them to the maintainer, see CHECKPATCH in MAINTAINERS.
> WARNING: space prohibited between function name and open parenthesis '('
> #125: FILE: common/main.c:429:
> +	if ((s = getenv ("premonitor")) != NULL) {
> 
> ERROR: do not use assignment in if condition
> #125: FILE: common/main.c:429:
> +	if ((s = getenv ("premonitor")) != NULL) {
> 
> WARNING: space prohibited between function name and open parenthesis '('
> #127: FILE: common/main.c:431:
> +		run_command (s, 0);
> 
> WARNING: line over 80 characters
> #129: FILE: common/main.c:433:
> +		parse_string_outer(s, FLAG_PARSE_SEMICOLON | FLAG_EXIT_FROM_LOOP);
> 
> total: 1 errors, 3 warnings, 25 lines checked
> 
> /home/wd/Mail/U-Boot/12788 has style problems, please review.

I will fix this too.

> 
> If any of these errors are false positives, please report
> them to the maintainer, see CHECKPATCH in MAINTAINERS.
> WARNING: externs should be avoided in .c files
> #282: FILE: board/nokia/rx51/rx51.c:59:
> +extern u32 rx51_atagaddr; /* atag address */
> 
> WARNING: externs should be avoided in .c files
> #283: FILE: board/nokia/rx51/rx51.c:60:
> +extern u32 rx51_kernaddr; /* attached kernel address */
> 
> WARNING: line over 80 characters
> #297: FILE: board/nokia/rx51/rx51.c:74:
> +"startaddr:\n"				/* address where should be u-boot after 
relocation */
> 
> WARNING: line over 80 characters
> #299: FILE: board/nokia/rx51/rx51.c:76:
> +"relocaddr:\n"				/* address of this relocaddr section after 
relocation */
> 
> WARNING: line over 80 characters
> #300: FILE: board/nokia/rx51/rx51.c:77:
> +"	.word .\n"			/* dot - address of this section (calculated at 
compile
> time, so same as after relocation) */
> 
> WARNING: line over 80 characters
> #307: FILE: board/nokia/rx51/rx51.c:84:
> +"kernaddr:\n"				/* stored attached kernel address (u-boot + 
0x40000) */
> 
> WARNING: line over 80 characters
> #310: FILE: board/nokia/rx51/rx51.c:87:
> +"save_boot_params:\n"			/* function save_boot_params, called after 
reset */
> 
> WARNING: line over 80 characters
> #313: FILE: board/nokia/rx51/rx51.c:90:
> +"	ldr	r1, relocaddr\n"	/* r1 - address where should be this relocaddr
> section after relocation */
> 
> WARNING: line over 80 characters
> #314: FILE: board/nokia/rx51/rx51.c:91:
> +"	sub	r0, r0, r1\n"		/* r1 - calculated offset for relocation */
> 
> WARNING: line over 80 characters
> #315: FILE: board/nokia/rx51/rx51.c:92:
> +"	ldr	r1, startaddr\n"	/* r1 - address where u-boot should be after
> relocation */
> 
> WARNING: line over 80 characters
> #316: FILE: board/nokia/rx51/rx51.c:93:
> +"	add	r0, r0, r1\n"		/* r0 - address where is u-boot (address after
> relocation + offset) */
> 
> WARNING: line over 80 characters
> #319: FILE: board/nokia/rx51/rx51.c:96:
> +"	bne	reloc\n"		/* start relocation if u-boot is not loaded at correct
> address CONFIG_SYS_TEXT_BASE */
> 
> WARNING: line over 80 characters
> #320: FILE: board/nokia/rx51/rx51.c:97:
> +"	bx	lr\n"			/* else return back to reset section (relocation is 
not
> needed) */
> 
> WARNING: line over 80 characters
> #324: FILE: board/nokia/rx51/rx51.c:101:
> +"	add	r2, r0, #0x40000\n"	/* r2 - address where is attached kernel (u-
boot
> address + kernel offset 0x40000) - also end address of u-boot */
> 
> WARNING: line over 80 characters
> #334: FILE: board/nokia/rx51/rx51.c:111:
> +"	ldr	pc, startaddr\n"	/* jump to start section (where should be u-boot
> after relocation) and restart u-boot */
> 
> WARNING: line over 80 characters
> #375: FILE: board/nokia/rx51/rx51.c:152:
> +	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg >> 8,
> TWL4030_PM_MASTER_PB_WORD_MSB);
> 
> WARNING: line over 80 characters
> #376: FILE: board/nokia/rx51/rx51.c:153:
> +	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg & 0xff,
> TWL4030_PM_MASTER_PB_WORD_LSB);
> 
> WARNING: line over 80 characters
> #403: FILE: board/nokia/rx51/rx51.c:180:
> +	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x02,
> TWL4030_PM_MASTER_PB_CFG);
> 
> ERROR: do not initialise statics to 0 or NULL
> #432: FILE: board/nokia/rx51/rx51.c:209:
> +static unsigned long int twl_wd_time = 0; /* last time of watchdog reset */
> 
> WARNING: Use of volatile is usually wrong: see
> Documentation/volatile-considered-harmful.txt #433: FILE:
> board/nokia/rx51/rx51.c:210:
> +static volatile unsigned long int twl_i2c_lock;
> 
> ERROR: space prohibited after that open parenthesis '('
> #444: FILE: board/nokia/rx51/rx51.c:221:
> +	if ( get_timer(twl_wd_time) < 4 * CONFIG_SYS_HZ )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #444: FILE: board/nokia/rx51/rx51.c:221:
> +	if ( get_timer(twl_wd_time) < 4 * CONFIG_SYS_HZ )
> 
> ERROR: space prohibited after that open parenthesis '('
> #448: FILE: board/nokia/rx51/rx51.c:225:
> +	if ( test_and_set_bit(0, &twl_i2c_lock) )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #448: FILE: board/nokia/rx51/rx51.c:225:
> +	if ( test_and_set_bit(0, &twl_i2c_lock) )
> 
> WARNING: line over 80 characters
> #452: FILE: board/nokia/rx51/rx51.c:229:
> +	twl4030_i2c_read_u8(TWL4030_CHIP_PM_RECEIVER, &timeout,
> TWL4030_PM_RECEIVER_WATCHDOG_CFG);
> 
> ERROR: space prohibited after that open parenthesis '('
> #456: FILE: board/nokia/rx51/rx51.c:233:
> +	if ( timeout != 0 )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #456: FILE: board/nokia/rx51/rx51.c:233:
> +	if ( timeout != 0 )
> 
> WARNING: line over 80 characters
> #457: FILE: board/nokia/rx51/rx51.c:234:
> +		twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 31,
> TWL4030_PM_RECEIVER_WATCHDOG_CFG);
> 
> ERROR: do not initialise statics to 0 or NULL
> #495: FILE: board/nokia/rx51/rx51.c:272:
> +static u8 keybuf_head = 0;
> 
> ERROR: do not initialise statics to 0 or NULL
> #496: FILE: board/nokia/rx51/rx51.c:273:
> +static u8 keybuf_tail = 0;
> 
> WARNING: line over 80 characters
> #532: FILE: board/nokia/rx51/rx51.c:309:
> +	if (!(mods & 2) && (k == 18 || k == 31 || k == 33 || k == 34)) { /* cursor
> keys, without fn */
> 
> ERROR: space prohibited after that open parenthesis '('
> #582: FILE: board/nokia/rx51/rx51.c:359:
> +	if ( test_and_set_bit(0, &twl_i2c_lock) )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #582: FILE: board/nokia/rx51/rx51.c:359:
> +	if ( test_and_set_bit(0, &twl_i2c_lock) )

I will look at rx51.c file

> 
> WARNING: line over 80 characters
> #764: FILE: board/nokia/rx51/rx51.h:108:
> +	MUX_VAL(CP(GPMC_NCS6),		(IEN  | PTD | DIS | M1)) /*SYS_nDMA_REQ2*/\
> 
> WARNING: line over 80 characters
> #765: FILE: board/nokia/rx51/rx51.h:109:
> +	MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTU | EN  | M1)) /*SYS_nDMA_REQ3*/\
> 
> WARNING: line over 80 characters
> #770: FILE: board/nokia/rx51/rx51.h:114:
> +	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
> 
> WARNING: line over 80 characters
> #773: FILE: board/nokia/rx51/rx51.h:117:
> +	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\
> 
> WARNING: line over 80 characters
> #833: FILE: board/nokia/rx51/rx51.h:177:
> +	MUX_VAL(CP(MCBSP2_CLKX),	(IEN  | PTD | DIS | M0)) /*McBSP2_CLKX*/\
> 
> WARNING: line over 80 characters
> #872: FILE: board/nokia/rx51/rx51.h:216:
> +	MUX_VAL(CP(MCBSP4_CLKX),	(IEN  | PTD | DIS | M1)) /*SSI1_DAT_RX*/\
> 
> WARNING: line over 80 characters
> #873: FILE: board/nokia/rx51/rx51.h:217:
> +	MUX_VAL(CP(MCBSP4_DR),		(IEN  | PTD | DIS | M1)) /*SSI1_FLAG_RX*/\
> 
> WARNING: line over 80 characters
> #874: FILE: board/nokia/rx51/rx51.h:218:
> +	MUX_VAL(CP(MCBSP4_DX),		(IEN  | PTD | DIS | M1)) /*SSI1_RDY_RX*/\
> 
> WARNING: line over 80 characters
> #884: FILE: board/nokia/rx51/rx51.h:228:
> +	MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTD | EN  | M0)) /*UART3_CTS_RCTX*/\
> 
> WARNING: line over 80 characters
> #885: FILE: board/nokia/rx51/rx51.h:229:
> +	MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\
> 
> WARNING: line over 80 characters
> #886: FILE: board/nokia/rx51/rx51.h:230:
> +	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) /*UART3_RX_IRRX*/\
> 
> WARNING: line over 80 characters
> #887: FILE: board/nokia/rx51/rx51.h:231:
> +	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\
> 
> WARNING: line over 80 characters
> #892: FILE: board/nokia/rx51/rx51.h:236:
> +	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA0*/\
> 
> WARNING: line over 80 characters
> #893: FILE: board/nokia/rx51/rx51.h:237:
> +	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA1*/\
> 
> WARNING: line over 80 characters
> #894: FILE: board/nokia/rx51/rx51.h:238:
> +	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA2*/\
> 
> WARNING: line over 80 characters
> #895: FILE: board/nokia/rx51/rx51.h:239:
> +	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA3*/\
> 
> WARNING: line over 80 characters
> #896: FILE: board/nokia/rx51/rx51.h:240:
> +	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA4*/\
> 
> WARNING: line over 80 characters
> #897: FILE: board/nokia/rx51/rx51.h:241:
> +	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA5*/\
> 
> WARNING: line over 80 characters
> #898: FILE: board/nokia/rx51/rx51.h:242:
> +	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA6*/\
> 
> WARNING: line over 80 characters
> #899: FILE: board/nokia/rx51/rx51.h:243:
> +	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA7*/\
> 
> WARNING: line over 80 characters
> #911: FILE: board/nokia/rx51/rx51.h:255:
> +	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) /*McSPI1_SOMI*/\
> 
> WARNING: line over 80 characters
> #916: FILE: board/nokia/rx51/rx51.h:260:
> +	MUX_VAL(CP(MCSPI1_CS3),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA2*/\
> 
> WARNING: line over 80 characters
> #917: FILE: board/nokia/rx51/rx51.h:261:
> +	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA7*/\
> 
> WARNING: line over 80 characters
> #918: FILE: board/nokia/rx51/rx51.h:262:
> +	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA4*/\
> 
> WARNING: line over 80 characters
> #919: FILE: board/nokia/rx51/rx51.h:263:
> +	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA5*/\
> 
> WARNING: line over 80 characters
> #920: FILE: board/nokia/rx51/rx51.h:264:
> +	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA6*/\
> 
> WARNING: line over 80 characters
> #921: FILE: board/nokia/rx51/rx51.h:265:
> +	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA3*/\
> 
> WARNING: line over 80 characters
> #926: FILE: board/nokia/rx51/rx51.h:270:
> +	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA0*/\
> 
> WARNING: line over 80 characters
> #927: FILE: board/nokia/rx51/rx51.h:271:
> +	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DATA1*/\
> 
> WARNING: line over 80 characters
> #934: FILE: board/nokia/rx51/rx51.h:278:
> +	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /*GPIO_4 - MMC1_WP*/\
> 
> WARNING: line over 80 characters
> #939: FILE: board/nokia/rx51/rx51.h:283:
> +	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
> 
> WARNING: line over 80 characters
> #940: FILE: board/nokia/rx51/rx51.h:284:
> +	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
> 
> WARNING: line over 80 characters
> #944: FILE: board/nokia/rx51/rx51.h:288:
> +	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA0*/\
> 
> WARNING: line over 80 characters
> #945: FILE: board/nokia/rx51/rx51.h:289:
> +	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA1*/\
> 
> WARNING: line over 80 characters
> #946: FILE: board/nokia/rx51/rx51.h:290:
> +	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA2*/\
> 
> WARNING: line over 80 characters
> #947: FILE: board/nokia/rx51/rx51.h:291:
> +	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA7*/\
> 
> WARNING: line over 80 characters
> #948: FILE: board/nokia/rx51/rx51.h:292:
> +	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA4*/\
> 
> WARNING: line over 80 characters
> #949: FILE: board/nokia/rx51/rx51.h:293:
> +	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA5*/\
> 
> WARNING: line over 80 characters
> #950: FILE: board/nokia/rx51/rx51.h:294:
> +	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA6*/\
> 
> WARNING: line over 80 characters
> #951: FILE: board/nokia/rx51/rx51.h:295:
> +	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA3*/\
> 
> WARNING: line over 80 characters
> #990: FILE: board/nokia/rx51/rx51.h:334:
> +	MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) /*d2d_clk26mi*/\
> 
> WARNING: line over 80 characters
> #991: FILE: board/nokia/rx51/rx51.h:335:
> +	MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) /*d2d_nrespwron*/\
> 
> WARNING: line over 80 characters
> #992: FILE: board/nokia/rx51/rx51.h:336:
> +	MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) /*d2d_nreswarm */\
> 
> WARNING: line over 80 characters
> #993: FILE: board/nokia/rx51/rx51.h:337:
> +	MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) /*d2d_arm9nirq */\
> 
> WARNING: line over 80 characters
> #994: FILE: board/nokia/rx51/rx51.h:338:
> +	MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\
> 
> WARNING: line over 80 characters
> #997: FILE: board/nokia/rx51/rx51.h:341:
> +	MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq0*/\
> 
> WARNING: line over 80 characters
> #998: FILE: board/nokia/rx51/rx51.h:342:
> +	MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq1*/\
> 
> WARNING: line over 80 characters
> #999: FILE: board/nokia/rx51/rx51.h:343:
> +	MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq2*/\
> 
> WARNING: line over 80 characters
> #1000: FILE: board/nokia/rx51/rx51.h:344:
> +	MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq3*/\
> 
> WARNING: line over 80 characters
> #1001: FILE: board/nokia/rx51/rx51.h:345:
> +	MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtrst*/\
> 
> WARNING: line over 80 characters
> #1006: FILE: board/nokia/rx51/rx51.h:350:
> +	MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) /*d2d_n3grtck*/\
> 
> WARNING: line over 80 characters
> #1008: FILE: board/nokia/rx51/rx51.h:352:
> +	MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) /*d2d_swakeup*/\
> 
> WARNING: line over 80 characters
> #1009: FILE: board/nokia/rx51/rx51.h:353:
> +	MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) /*d2d_idlereq*/\
> 
> WARNING: line over 80 characters
> #1010: FILE: board/nokia/rx51/rx51.h:354:
> +	MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) /*d2d_idleack*/\
> 
> WARNING: line over 80 characters
> #1015: FILE: board/nokia/rx51/rx51.h:359:
> +	MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_mbusflag*/\
> 
> WARNING: line over 80 characters
> #1016: FILE: board/nokia/rx51/rx51.h:360:
> +	MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_sbusflag*/\

This code was copied from beagle board.

> 
> WARNING: line over 80 characters
> #1088: FILE: include/configs/nokia_rx51.h:42:
> +#define CONFIG_ARMV7						/* This is an ARM V7 CPU core */
> 
> WARNING: line over 80 characters
> #1089: FILE: include/configs/nokia_rx51.h:43:
> +#define CONFIG_OMAP						/* in a TI OMAP core */
> 
> WARNING: line over 80 characters
> #1090: FILE: include/configs/nokia_rx51.h:44:
> +#define CONFIG_OMAP34XX						/* which is a 34XX */
> 
> WARNING: line over 80 characters
> #1091: FILE: include/configs/nokia_rx51.h:45:
> +#define CONFIG_OMAP3430						/* which is in a 3430 */
> 
> WARNING: line over 80 characters
> #1092: FILE: include/configs/nokia_rx51.h:46:
> +#define CONFIG_CHAINLOADER					/* Loaded by NOLO */
> 
> WARNING: line over 80 characters
> #1093: FILE: include/configs/nokia_rx51.h:47:
> +#define CONFIG_L2_OFF						/* kernel won't boot if l2 
enabled (old u-boot
> tried but failed to enable it, due to a bug.) */
> 
> WARNING: line over 80 characters
> #1100: FILE: include/configs/nokia_rx51.h:54:
> +#define CONFIG_SDRC						/* The chip has SDRC controller */
> 
> WARNING: line over 80 characters
> #1102: FILE: include/configs/nokia_rx51.h:56:
> +#include <asm/arch/cpu.h>					/* get chip and board defs */
> 
> WARNING: line over 80 characters
> #1112: FILE: include/configs/nokia_rx51.h:66:
> +#define V_OSCK				26000000		/* Clock output from T2 */
> 
> WARNING: line over 80 characters
> #1115: FILE: include/configs/nokia_rx51.h:69:
> +#undef CONFIG_USE_IRQ						/* no support for IRQs */
> 
> WARNING: line over 80 characters
> #1117: FILE: include/configs/nokia_rx51.h:71:
> +#define CONFIG_SKIP_LOWLEVEL_INIT				/* NOLO set everything up */
> 
> WARNING: line over 80 characters
> #1119: FILE: include/configs/nokia_rx51.h:73:
> +#define CONFIG_CMDLINE_TAG					/* enable passing kernel 
command line string
> */
> 
> WARNING: line over 80 characters
> #1120: FILE: include/configs/nokia_rx51.h:74:
> +#define CONFIG_INITRD_TAG					/* enable passing initrd */
> 
> WARNING: line over 80 characters
> #1125: FILE: include/configs/nokia_rx51.h:79:
> +#define CONFIG_ENV_SIZE			(128 << 10)		/* 128 KiB Sector */
> 
> WARNING: line over 80 characters
> #1135: FILE: include/configs/nokia_rx51.h:89:
> +#define V_NS16550_CLK			48000000		/* 48MHz (APLL96/2) */
> 
> WARNING: line over 80 characters
> #1147: FILE: include/configs/nokia_rx51.h:101:
> +#define CONFIG_SERIAL3			3			/* UART3 on RX-51 */
> 
> ERROR: space required after that ',' (ctx:VxV)
> #1152: FILE: include/configs/nokia_rx51.h:106:
> +#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,115200}
>                                   	                                ^
> 
> WARNING: line over 80 characters
> #1176: FILE: include/configs/nokia_rx51.h:130:
> +#define CONFIG_CMD_EXT2						/* EXT2 Support */
> 
> WARNING: line over 80 characters
> #1177: FILE: include/configs/nokia_rx51.h:131:
> +#define CONFIG_CMD_FAT						/* FAT support */
> 
> WARNING: line over 80 characters
> #1179: FILE: include/configs/nokia_rx51.h:133:
> +#define CONFIG_CMD_I2C						/* I2C serial bus support */
> 
> WARNING: line over 80 characters
> #1180: FILE: include/configs/nokia_rx51.h:134:
> +#define CONFIG_CMD_MMC						/* MMC support */
> 
> WARNING: line over 80 characters
> #1181: FILE: include/configs/nokia_rx51.h:135:
> +#undef CONFIG_CMD_ONENAND					/* NAND support */
> 
> WARNING: line over 80 characters
> #1183: FILE: include/configs/nokia_rx51.h:137:
> +#define CONFIG_CMD_CLR						/* ANSI terminal clear screen 
command */
> 
> WARNING: line over 80 characters
> #1185: FILE: include/configs/nokia_rx51.h:139:
> +#undef CONFIG_CMD_FLASH						/* flinfo, erase, protect */
> 
> WARNING: line over 80 characters
> #1186: FILE: include/configs/nokia_rx51.h:140:
> +#undef CONFIG_CMD_FPGA						/* FPGA configuration Support 
*/
> 
> WARNING: line over 80 characters
> #1188: FILE: include/configs/nokia_rx51.h:142:
> +#undef CONFIG_CMD_IMLS						/* List all found images */
> 
> WARNING: line over 80 characters
> #1189: FILE: include/configs/nokia_rx51.h:143:
> +#undef CONFIG_CMD_NET						/* bootp, tftpboot, rarpboot 
*/
> 
> WARNING: line over 80 characters
> #1190: FILE: include/configs/nokia_rx51.h:144:
> +#undef CONFIG_CMD_NFS						/* NFS support */
> 
> WARNING: line over 80 characters
> #1216: FILE: include/configs/nokia_rx51.h:170:
> +#define CONFIG_CFB_CONSOLE_ANSI					/* Enable ANSI escape codes 
in
> framebuffer */

I think adding these comments are usefull - do you want to remove it?

> 
> WARNING: line over 80 characters
> #1249: FILE: include/configs/nokia_rx51.h:203:
> +	"scriptload=${mmctype}load mmc ${mmcnum}:${mmcpart} ${loadaddr}
> ${mmcfile}\0" \
> 
> WARNING: line over 80 characters
> #1250: FILE: include/configs/nokia_rx51.h:204:
> +	"scriptboot=echo Running ${mmcfile} from mmc ${mmcnum}:${mmcpart} ...;" \
> 
> WARNING: line over 80 characters
> #1252: FILE: include/configs/nokia_rx51.h:206:
> +	"uimageload=${mmctype}load mmc ${mmcnum}:${mmcpart} ${loadaddr}
> ${mmcfile}\0" \
> 
> WARNING: line over 80 characters
> #1253: FILE: include/configs/nokia_rx51.h:207:
> +	"uimageboot=echo Booting ${mmcfile} from mmc ${mmcnum}:${mmcpart} ...;" \
> 
> WARNING: line over 80 characters
> #1306: FILE: include/configs/nokia_rx51.h:260:
> +#define CONFIG_SYS_LONGHELP					/* undef to save memory */
> 
> WARNING: line over 80 characters
> #1307: FILE: include/configs/nokia_rx51.h:261:
> +#define CONFIG_SYS_HUSH_PARSER					/* use "hush" command parser 
*/
> 
> WARNING: line over 80 characters
> #1310: FILE: include/configs/nokia_rx51.h:264:
> +#define CONFIG_SYS_CBSIZE		256			/* Console I/O Buffer Size */
> 
> WARNING: line over 80 characters
> #1312: FILE: include/configs/nokia_rx51.h:266:
> +#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + 
sizeof(CONFIG_SYS_PROMPT) +
> 16)
> 
> WARNING: line over 80 characters
> #1313: FILE: include/configs/nokia_rx51.h:267:
> +#define CONFIG_SYS_MAXARGS		16			/* max number of command args 
*/
> 
> WARNING: line over 80 characters
> #1317: FILE: include/configs/nokia_rx51.h:271:
> +#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest works on 
*/
> 
> WARNING: line over 80 characters
> #1318: FILE: include/configs/nokia_rx51.h:272:
> +#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + 0x01F00000) /* 31MB 
*/
> 
> WARNING: line over 80 characters
> #1320: FILE: include/configs/nokia_rx51.h:274:
> +#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default load 
address
> */
> 
> WARNING: line over 80 characters
> #1328: FILE: include/configs/nokia_rx51.h:282:
> +#define CONFIG_SYS_PTV			2			/* Divisor: 2^(PTV+1) => 8 */
> 
> WARNING: line over 80 characters
> #1336: FILE: include/configs/nokia_rx51.h:290:
> +#define CONFIG_STACKSIZE		(128 << 10)		/* regular stack 128 KiB */
> 
> WARNING: line over 80 characters
> #1338: FILE: include/configs/nokia_rx51.h:292:
> +#define CONFIG_STACKSIZE_IRQ		(4 << 10)		/* IRQ stack 4 KiB */
> 
> WARNING: line over 80 characters
> #1339: FILE: include/configs/nokia_rx51.h:293:
> +#define CONFIG_STACKSIZE_FIQ		(4 << 10)		/* FIQ stack 4 KiB */
> 
> WARNING: line over 80 characters
> #1345: FILE: include/configs/nokia_rx51.h:299:
> +#define CONFIG_NR_DRAM_BANKS		2			/* CS1 may or may not be 
populated */
> 
> WARNING: line over 80 characters
> #1361: FILE: include/configs/nokia_rx51.h:315:
> +#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR +
> CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
> 
> total: 12 errors, 124 warnings, 1173 lines checked
> 
> /home/wd/Mail/U-Boot/12789 has style problems, please review.
> 
> If any of these errors are false positives, please report
> them to the maintainer, see CHECKPATCH in MAINTAINERS.
> ERROR: "foo * bar" should be "foo *bar"
> #178: FILE: common/cmd_bootmenu.c:32:
> +static char * get_option(int n) {
> 
> ERROR: open brace '{' following function declarations go on the next line
> #178: FILE: common/cmd_bootmenu.c:32:
> +static char * get_option(int n) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #182: FILE: common/cmd_bootmenu.c:36:
> +	if ( n < 0 || n > 99 )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #182: FILE: common/cmd_bootmenu.c:36:
> +	if ( n < 0 || n > 99 )
> 
> ERROR: "foo * bar" should be "foo *bar"
> #191: FILE: common/cmd_bootmenu.c:45:
> +static char * get_end_of_title(char * str) {
> 
> ERROR: open brace '{' following function declarations go on the next line
> #191: FILE: common/cmd_bootmenu.c:45:
> +static char * get_end_of_title(char * str) {
> 
> ERROR: space prohibited after that '!' (ctx:WxW)
> #193: FILE: common/cmd_bootmenu.c:47:
> +	if ( ! str )
>  	     ^
> 
> ERROR: space prohibited after that open parenthesis '('
> #193: FILE: common/cmd_bootmenu.c:47:
> +	if ( ! str )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #193: FILE: common/cmd_bootmenu.c:47:
> +	if ( ! str )
> 
> ERROR: "foo * bar" should be "foo *bar"
> #200: FILE: common/cmd_bootmenu.c:54:
> +static int print_title(char * begin, char * end) {
> 
> ERROR: open brace '{' following function declarations go on the next line
> #200: FILE: common/cmd_bootmenu.c:54:
> +static int print_title(char * begin, char * end) {
> 
> ERROR: space prohibited after that '!' (ctx:WxW)
> #202: FILE: common/cmd_bootmenu.c:56:
> +	if ( ! begin || ! end || end < begin )
>  	     ^
> 
> ERROR: space prohibited after that '!' (ctx:WxW)
> #202: FILE: common/cmd_bootmenu.c:56:
> +	if ( ! begin || ! end || end < begin )
>  	                ^
> 
> ERROR: space prohibited after that open parenthesis '('
> #202: FILE: common/cmd_bootmenu.c:56:
> +	if ( ! begin || ! end || end < begin )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #202: FILE: common/cmd_bootmenu.c:56:
> +	if ( ! begin || ! end || end < begin )
> 
> ERROR: space prohibited after that open parenthesis '('
> #205: FILE: common/cmd_bootmenu.c:59:
> +	while ( begin != end )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #205: FILE: common/cmd_bootmenu.c:59:
> +	while ( begin != end )
> 
> ERROR: open brace '{' following function declarations go on the next line
> #212: FILE: common/cmd_bootmenu.c:66:
> +static int print_entry(int n, int reverse) {
> 
> ERROR: "foo * bar" should be "foo *bar"
> #214: FILE: common/cmd_bootmenu.c:68:
> +	char * str = get_option(n);
> 
> ERROR: "foo * bar" should be "foo *bar"
> #215: FILE: common/cmd_bootmenu.c:69:
> +	char * end = get_end_of_title(str);
> 
> ERROR: space prohibited after that '!' (ctx:WxW)
> #217: FILE: common/cmd_bootmenu.c:71:
> +	if ( ! end )
>  	     ^
> 
> ERROR: space prohibited after that open parenthesis '('
> #217: FILE: common/cmd_bootmenu.c:71:
> +	if ( ! end )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #217: FILE: common/cmd_bootmenu.c:71:
> +	if ( ! end )
> 
> ERROR: space prohibited after that open parenthesis '('
> #222: FILE: common/cmd_bootmenu.c:76:
> +	if ( reverse )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #222: FILE: common/cmd_bootmenu.c:76:
> +	if ( reverse )
> 
> ERROR: space prohibited after that open parenthesis '('
> #229: FILE: common/cmd_bootmenu.c:83:
> +	if ( reverse )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #229: FILE: common/cmd_bootmenu.c:83:
> +	if ( reverse )
> 
> ERROR: open brace '{' following function declarations go on the next line
> #236: FILE: common/cmd_bootmenu.c:90:
> +static int print_menu(int active) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #248: FILE: common/cmd_bootmenu.c:102:
> +	while ( 1 ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #248: FILE: common/cmd_bootmenu.c:102:
> +	while ( 1 ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #252: FILE: common/cmd_bootmenu.c:106:
> +		if ( ret == 1 )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #252: FILE: common/cmd_bootmenu.c:106:
> +		if ( ret == 1 )
> 
> ERROR: space prohibited after that open parenthesis '('
> #261: FILE: common/cmd_bootmenu.c:115:
> +	if ( n == active )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #261: FILE: common/cmd_bootmenu.c:115:
> +	if ( n == active )
> 
> ERROR: space prohibited after that open parenthesis '('
> #267: FILE: common/cmd_bootmenu.c:121:
> +	if ( n == active )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #267: FILE: common/cmd_bootmenu.c:121:
> +	if ( n == active )
> 
> ERROR: open brace '{' following function declarations go on the next line
> #282: FILE: common/cmd_bootmenu.c:136:
> +int do_bootmenu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> {
> 
> ERROR: "foo * bar" should be "foo *bar"
> #291: FILE: common/cmd_bootmenu.c:145:
> +	char * delay_str = NULL;
> 
> ERROR: space prohibited after that open parenthesis '('
> #293: FILE: common/cmd_bootmenu.c:147:
> +	if ( argc >= 2 )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #293: FILE: common/cmd_bootmenu.c:147:
> +	if ( argc >= 2 )
> 
> ERROR: space prohibited after that '!' (ctx:WxW)
> #296: FILE: common/cmd_bootmenu.c:150:
> +	if ( ! delay_str )
>  	     ^
> 
> ERROR: space prohibited after that open parenthesis '('
> #296: FILE: common/cmd_bootmenu.c:150:
> +	if ( ! delay_str )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #296: FILE: common/cmd_bootmenu.c:150:
> +	if ( ! delay_str )
> 
> ERROR: space prohibited after that open parenthesis '('
> #299: FILE: common/cmd_bootmenu.c:153:
> +	if ( delay_str )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #299: FILE: common/cmd_bootmenu.c:153:
> +	if ( delay_str )
> 
> WARNING: consider using kstrto* in preference to simple_strtol
> #300: FILE: common/cmd_bootmenu.c:154:
> +		delay = (int)simple_strtol(delay_str, NULL, 10);
> 
> ERROR: space prohibited after that open parenthesis '('
> #302: FILE: common/cmd_bootmenu.c:156:
> +	if ( delay == 0 ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #302: FILE: common/cmd_bootmenu.c:156:
> +	if ( delay == 0 ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #305: FILE: common/cmd_bootmenu.c:159:
> +		if ( get_end_of_title(get_option(0)) )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #305: FILE: common/cmd_bootmenu.c:159:
> +		if ( get_end_of_title(get_option(0)) )
> 
> ERROR: space prohibited after that open parenthesis '('
> #312: FILE: common/cmd_bootmenu.c:166:
> +	if ( delay < 0 )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #312: FILE: common/cmd_bootmenu.c:166:
> +	if ( delay < 0 )
> 
> ERROR: space prohibited after that '!' (ctx:WxW)
> #315: FILE: common/cmd_bootmenu.c:169:
> +	if ( ! instant ) {
>  	     ^
> 
> ERROR: space prohibited after that open parenthesis '('
> #315: FILE: common/cmd_bootmenu.c:169:
> +	if ( ! instant ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #315: FILE: common/cmd_bootmenu.c:169:
> +	if ( ! instant ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #322: FILE: common/cmd_bootmenu.c:176:
> +	while ( 1 ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #322: FILE: common/cmd_bootmenu.c:176:
> +	while ( 1 ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #324: FILE: common/cmd_bootmenu.c:178:
> +		if ( abort || delay > 0 )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #324: FILE: common/cmd_bootmenu.c:178:
> +		if ( abort || delay > 0 )
> 
> ERROR: space prohibited after that '!' (ctx:WxW)
> #327: FILE: common/cmd_bootmenu.c:181:
> +		if ( ! abort ) {
>  		     ^
> 
> ERROR: space prohibited after that open parenthesis '('
> #327: FILE: common/cmd_bootmenu.c:181:
> +		if ( ! abort ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #327: FILE: common/cmd_bootmenu.c:181:
> +		if ( ! abort ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #329: FILE: common/cmd_bootmenu.c:183:
> +			if ( delay > 0 )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #329: FILE: common/cmd_bootmenu.c:183:
> +			if ( delay > 0 )
> 
> WARNING: line over 80 characters
> #330: FILE: common/cmd_bootmenu.c:184:
> +				printf("  Hit any key to stop autoboot: %2d ", delay);
> 
> ERROR: space prohibited after that open parenthesis '('
> #332: FILE: common/cmd_bootmenu.c:186:
> +			while ( delay > 0 ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #332: FILE: common/cmd_bootmenu.c:186:
> +			while ( delay > 0 ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #336: FILE: common/cmd_bootmenu.c:190:
> +				for ( i = 0; i < 100; ++i ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #336: FILE: common/cmd_bootmenu.c:190:
> +				for ( i = 0; i < 100; ++i ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #338: FILE: common/cmd_bootmenu.c:192:
> +					if ( tstc() ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #338: FILE: common/cmd_bootmenu.c:192:
> +					if ( tstc() ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #343: FILE: common/cmd_bootmenu.c:197:
> +						if ( key == '\e' ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #343: FILE: common/cmd_bootmenu.c:197:
> +						if ( key == '\e' ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #346: FILE: common/cmd_bootmenu.c:200:
> +						} else if ( key == '\r' )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #346: FILE: common/cmd_bootmenu.c:200:
> +						} else if ( key == '\r' )
> 
> ERROR: space prohibited after that open parenthesis '('
> #360: FILE: common/cmd_bootmenu.c:214:
> +				if ( abort )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #360: FILE: common/cmd_bootmenu.c:214:
> +				if ( abort )
> 
> ERROR: space prohibited after that open parenthesis '('
> #368: FILE: common/cmd_bootmenu.c:222:
> +			if ( delay <= 0 )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #368: FILE: common/cmd_bootmenu.c:222:
> +			if ( delay <= 0 )
> 
> ERROR: space prohibited after that '!' (ctx:WxW)
> #373: FILE: common/cmd_bootmenu.c:227:
> +			while ( ! tstc() ) {
>  			        ^
> 
> ERROR: space prohibited after that open parenthesis '('
> #373: FILE: common/cmd_bootmenu.c:227:
> +			while ( ! tstc() ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #373: FILE: common/cmd_bootmenu.c:227:
> +			while ( ! tstc() ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #382: FILE: common/cmd_bootmenu.c:236:
> +			if ( esc == 0 ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #382: FILE: common/cmd_bootmenu.c:236:
> +			if ( esc == 0 ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #384: FILE: common/cmd_bootmenu.c:238:
> +				if ( key == '\e' ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #384: FILE: common/cmd_bootmenu.c:238:
> +				if ( key == '\e' ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #389: FILE: common/cmd_bootmenu.c:243:
> +			} else if ( esc == 1 ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #389: FILE: common/cmd_bootmenu.c:243:
> +			} else if ( esc == 1 ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #391: FILE: common/cmd_bootmenu.c:245:
> +				if ( key == '[' ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #391: FILE: common/cmd_bootmenu.c:245:
> +				if ( key == '[' ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #397: FILE: common/cmd_bootmenu.c:251:
> +			} else if ( esc == 2 || esc == 3 ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #397: FILE: common/cmd_bootmenu.c:251:
> +			} else if ( esc == 2 || esc == 3 ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #399: FILE: common/cmd_bootmenu.c:253:
> +				if ( esc == 2 && key == '1' ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #399: FILE: common/cmd_bootmenu.c:253:
> +				if ( esc == 2 && key == '1' ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #405: FILE: common/cmd_bootmenu.c:259:
> +				if ( key == 'A' )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #405: FILE: common/cmd_bootmenu.c:259:
> +				if ( key == 'A' )
> 
> ERROR: space prohibited after that open parenthesis '('
> #407: FILE: common/cmd_bootmenu.c:261:
> +				else if ( key == 'B' )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #407: FILE: common/cmd_bootmenu.c:261:
> +				else if ( key == 'B' )
> 
> ERROR: space prohibited after that open parenthesis '('
> #414: FILE: common/cmd_bootmenu.c:268:
> +			if ( key == '\r' )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #414: FILE: common/cmd_bootmenu.c:268:
> +			if ( key == '\r' )
> 
> ERROR: space prohibited after that open parenthesis '('
> #419: FILE: common/cmd_bootmenu.c:273:
> +		if ( key == 1 ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #419: FILE: common/cmd_bootmenu.c:273:
> +		if ( key == 1 ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #421: FILE: common/cmd_bootmenu.c:275:
> +			if ( active > 0 )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #421: FILE: common/cmd_bootmenu.c:275:
> +			if ( active > 0 )
> 
> ERROR: space prohibited after that open parenthesis '('
> #424: FILE: common/cmd_bootmenu.c:278:
> +		} else if ( key == 2 ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #424: FILE: common/cmd_bootmenu.c:278:
> +		} else if ( key == 2 ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #426: FILE: common/cmd_bootmenu.c:280:
> +			if ( active < count )
> 
> ERROR: space prohibited before that close parenthesis ')'
> #426: FILE: common/cmd_bootmenu.c:280:
> +			if ( active < count )
> 
> ERROR: space prohibited after that open parenthesis '('
> #429: FILE: common/cmd_bootmenu.c:283:
> +		} else if ( key == 3 ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #429: FILE: common/cmd_bootmenu.c:283:
> +		} else if ( key == 3 ) {
> 
> ERROR: "foo * bar" should be "foo *bar"
> #431: FILE: common/cmd_bootmenu.c:285:
> +			char * str;
> 
> ERROR: "foo * bar" should be "foo *bar"
> #432: FILE: common/cmd_bootmenu.c:286:
> +			char * end;
> 
> ERROR: space prohibited after that '!' (ctx:WxW)
> #436: FILE: common/cmd_bootmenu.c:290:
> +			if ( ! instant ) {
>  			     ^
> 
> ERROR: space prohibited after that open parenthesis '('
> #436: FILE: common/cmd_bootmenu.c:290:
> +			if ( ! instant ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #436: FILE: common/cmd_bootmenu.c:290:
> +			if ( ! instant ) {
> 
> ERROR: space prohibited after that open parenthesis '('
> #446: FILE: common/cmd_bootmenu.c:300:
> +			if ( active == count ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #446: FILE: common/cmd_bootmenu.c:300:
> +			if ( active == count ) {
> 
> ERROR: space prohibited after that '!' (ctx:WxW)
> #456: FILE: common/cmd_bootmenu.c:310:
> +			if ( ! end ) {
>  			     ^
> 
> ERROR: space prohibited after that open parenthesis '('
> #456: FILE: common/cmd_bootmenu.c:310:
> +			if ( ! end ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #456: FILE: common/cmd_bootmenu.c:310:
> +			if ( ! end ) {
> 
> WARNING: line over 80 characters
> #458: FILE: common/cmd_bootmenu.c:312:
> +				printf("Invalid Boot Menu entry %d\nStarting U-Boot 
console\n\n",
> active);
> 
> ERROR: space prohibited after that '!' (ctx:WxW)
> #463: FILE: common/cmd_bootmenu.c:317:
> +			if ( ! end[1] ) {
>  			     ^
> 
> ERROR: space prohibited after that open parenthesis '('
> #463: FILE: common/cmd_bootmenu.c:317:
> +			if ( ! end[1] ) {
> 
> ERROR: space prohibited before that close parenthesis ')'
> #463: FILE: common/cmd_bootmenu.c:317:
> +			if ( ! end[1] ) {
> 
> WARNING: line over 80 characters
> #479: FILE: common/cmd_bootmenu.c:333:
> +			parse_string_outer(end+1, FLAG_PARSE_SEMICOLON | 
FLAG_EXIT_FROM_LOOP);
> 
> total: 121 errors, 4 warnings, 369 lines checked
> 
> /home/wd/Mail/U-Boot/12790 has style problems, please review.

I will look at this file and try to fix problems.

> 
> If any of these errors are false positives, please report
> them to the maintainer, see CHECKPATCH in MAINTAINERS.
> WARNING: line over 80 characters
> #111: FILE: include/configs/nokia_rx51.h:137:
> +#define CONFIG_CMD_BOOTMENU					/* ANSI terminal Boot Menu */
> 
> WARNING: line over 80 characters
> #140: FILE: include/configs/nokia_rx51.h:244:
> +		"setenv mmcnum 1; setenv mmcpart 1; setenv mmctype fat; setenv mmcfile
> bootmenu.scr;" \
> 
> total: 0 errors, 2 warnings, 48 lines checked
> 
> /home/wd/Mail/U-Boot/12791 has style problems, please review.
> 
> If any of these errors are false positives, please report
> them to the maintainer, see CHECKPATCH in MAINTAINERS.
> 
> Best regards,
> 
> Wolfgang Denk

-- 
Pali Roh?r
pali.rohar at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20111218/3d419837/attachment.pgp>

  reply	other threads:[~2011-12-18 10:13 UTC|newest]

Thread overview: 111+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-01  8:42 [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900) Pali Rohár
2011-09-01  8:46 ` Marek Vasut
2011-09-01  9:06   ` Pali Rohár
2011-09-01  9:39     ` Marek Vasut
2011-09-01  9:02 ` Stefano Babic
2011-09-01  9:09   ` Pali Rohár
2011-09-01  9:24     ` Stefano Babic
2011-09-01 10:49       ` Pali Rohár
2011-09-01 11:04         ` Marek Vasut
2011-09-01 11:34           ` [U-Boot] [PATCH 01/15] Make bootm optionally use pre-existing atags for Linux kernel boot Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 02/15] Store existing atags at startup if chainloading Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 03/15] Nokia RX-51 aka N900 support Pali Rohár
2011-09-01 13:57               ` Mike Frysinger
2011-10-09  0:20                 ` Pali Rohár
2011-10-09 15:59                   ` Mike Frysinger
2011-10-12 15:10                     ` Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 04/15] Only delay boot if keyboard open Pali Rohár
2011-09-01 13:58               ` Mike Frysinger
2011-10-08 23:29                 ` Pali Rohár
2011-10-09 16:00                   ` Mike Frysinger
2011-09-01 11:34             ` [U-Boot] [PATCH 05/15] Change Wireless LAN mode from M4 to M0 Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 06/15] Look for boot.scr on 'mmc 0:3' instead 'mmc 0' and add support for loading boot.scr from 'mmc 2:1' Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 07/15] RX-51: Fixed compilation on top of master (changes from Beagle Board) Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 08/15] RX-51: Add support for resetting twl4030 watchdog Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 09/15] RX-51: Fix keymap Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 10/15] include/common.h: Add some macros for ANSI escape codes Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 11/15] drivers/video/cfb_console.c: Added support " Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 12/15] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-09-01 13:59               ` Mike Frysinger
2011-10-08 23:31                 ` Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 13/15] New config variable CONFIG_MENU Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 14/15] New config variable CONFIG_PREMONITOR Pali Rohár
2011-09-01 11:34             ` [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu Pali Rohár
2011-09-01 13:52             ` [U-Boot] [PATCH 01/15] Make bootm optionally use pre-existing atags for Linux kernel boot Mike Frysinger
2011-10-08 23:37               ` Pali Rohár
2011-09-01 11:53         ` [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-10-09  0:24           ` Pali Rohár
2011-09-01 17:11 ` Pali Rohár
2011-12-17 16:59 ` [U-Boot] " Pali Rohár
2011-12-17 17:03   ` [U-Boot] [PATCH 01/16] arch/arm/cpu/armv7/omap3/lowlevel_init.S: save_boot_params Pali Rohár
2011-12-17 17:03     ` [U-Boot] [PATCH 02/16] arch/arm/lib/bootm.c: Optionally use existing atags Pali Rohár
2011-12-18 18:54       ` Mike Frysinger
2011-12-18 20:12         ` Pali Rohár
2011-12-17 17:03     ` [U-Boot] [PATCH 03/16] include/twl4030.h: Add power bus message definitions Pali Rohár
2011-12-17 17:03     ` [U-Boot] [PATCH 04/16] include/common.h: Add some ANSI escape codes definitions Pali Rohár
2011-12-17 17:03     ` [U-Boot] [PATCH 05/16] common/main.c: Fix function readline Pali Rohár
2011-12-18 18:58       ` Mike Frysinger
2011-12-18 20:12         ` Pali Rohár
2011-12-17 17:03     ` [U-Boot] [PATCH 06/16] drivers/video/cfb_console.c: Fix function console_scrollup Pali Rohár
2011-12-17 17:03     ` [U-Boot] [PATCH 07/16] drivers/video/cfb_console.c: Add function console_swap_colors Pali Rohár
2011-12-18 18:57       ` Mike Frysinger
2011-12-18 19:00         ` Pali Rohár
2011-12-18 20:06           ` Mike Frysinger
2011-12-17 17:03     ` [U-Boot] [PATCH 08/16] drivers/video/cfb_console.c: Add function console_clear and console_clear_line Pali Rohár
2011-12-18 19:00       ` Mike Frysinger
2011-12-17 17:03     ` [U-Boot] [PATCH 09/16] drivers/video/cfb_console.c: Add functions for moving with cursor Pali Rohár
2011-12-18 19:00       ` Mike Frysinger
2011-12-17 17:03     ` [U-Boot] [PATCH 10/16] drivers/video/cfb_console.c: Add support for some ANSI terminal escape codes Pali Rohár
2011-12-18 19:01       ` Mike Frysinger
2011-12-17 17:03     ` [U-Boot] [PATCH 11/16] New command clr: Clear the ANSI terminal Pali Rohár
2011-12-18 18:56       ` Mike Frysinger
2011-12-18 19:20         ` Pali Rohár
2011-12-18 20:07           ` Mike Frysinger
2011-12-17 17:03     ` [U-Boot] [PATCH 12/16] New config variable CONFIG_MENUCMD Pali Rohár
2011-12-17 17:03     ` [U-Boot] [PATCH 13/16] New config variable CONFIG_PREMONITOR Pali Rohár
2011-12-18 19:05       ` Mike Frysinger
2011-12-18 19:37         ` Pali Rohár
2011-12-18 20:08           ` Mike Frysinger
2011-12-18 20:14             ` Pali Rohár
2011-12-17 17:03     ` [U-Boot] [PATCH 14/16] New board support: Nokia RX-51 aka N900 Pali Rohár
2011-12-18 19:06       ` Mike Frysinger
2011-12-17 17:03     ` [U-Boot] [PATCH 15/16] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-12-18 19:07       ` Mike Frysinger
2011-12-18 19:12         ` Pali Rohár
2011-12-18 20:07           ` Mike Frysinger
2011-12-18 20:16             ` Pali Rohár
2012-01-06  6:59               ` Mike Frysinger
2011-12-17 17:03     ` [U-Boot] [PATCH 16/16] RX-51: Add support for bootmenu Pali Rohár
2011-12-17 19:25   ` [U-Boot] U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-12-18 10:13     ` Pali Rohár [this message]
2011-12-18 12:42       ` Wolfgang Denk
2011-12-18 19:01   ` Mike Frysinger
2011-12-18 20:10     ` Pali Rohár
2011-12-18 21:33   ` [U-Boot] [PATCH v3] " Pali Rohár
2011-12-18 21:33     ` [U-Boot] [PATCH 01/15] arch/arm/cpu/armv7/omap3/lowlevel_init.S: save_boot_params Pali Rohár
2011-12-18 21:33       ` [U-Boot] [PATCH 02/15] arch/arm/lib/bootm.c: Optionally use existing atags Pali Rohár
2011-12-18 21:33       ` [U-Boot] [PATCH 03/15] include/twl4030.h: Add power bus message definitions Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 04/15] include/common.h: Add some ANSI escape codes definitions Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 05/15] common/main.c: Fix function readline Pali Rohár
2012-01-06 20:15         ` Mike Frysinger
2012-01-07  8:51           ` Pali Rohár
2012-02-27  4:33             ` Mike Frysinger
2012-02-27 18:40               ` Pali Rohár
2012-02-27 20:20                 ` Mike Frysinger
2011-12-18 21:34       ` [U-Boot] [PATCH 06/15] drivers/video/cfb_console.c: Fix function console_scrollup Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 07/15] drivers/video/cfb_console.c: Add function console_clear and console_clear_line Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 08/15] drivers/video/cfb_console.c: Add functions for moving with cursor Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 09/15] drivers/video/cfb_console.c: Add support for some ANSI terminal escape codes Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 10/15] New command clear: Clear the ANSI terminal Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 11/15] New config variable CONFIG_MENUCMD Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 12/15] New config variable CONFIG_PREMONITOR Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 13/15] New board support: Nokia RX-51 aka N900 Pali Rohár
2012-01-03 16:05         ` Tom Rini
2012-01-10 13:14           ` Pali Rohár
2012-01-10 14:53             ` Tom Rini
2011-12-18 21:34       ` [U-Boot] [PATCH 14/15] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-12-18 21:34       ` [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu Pali Rohár
2012-01-03 16:06         ` Tom Rini
2011-12-18 23:57     ` [U-Boot] [PATCH v3] U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-12-19  7:17       ` Pali Rohár
2011-12-19  8:43         ` Graeme Russ

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=17199828.H8TsXDWnq5@pali-elitebook \
    --to=pali.rohar@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.