From: Marek Vasut <marek.vasut@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900)
Date: Thu, 1 Sep 2011 10:46:38 +0200 [thread overview]
Message-ID: <201109011046.38556.marek.vasut@gmail.com> (raw)
In-Reply-To: <2265056.NfLL5Fdny9@pali-elitebook>
On Thursday, September 01, 2011 10:42:48 AM Pali Roh?r wrote:
> Hello,
>
> U-Boot patches which add support for Nokia RX-51 (aka N900) is here:
> http://al.robotfuzz.com/~al/maemo/u-boot/
>
> RX-51 has closed 2nd stage bootloader NOLO which can load kernel image from
> nand (or usb) to ram and boot it. NOLO also done all HW initializations.
> These U-Boot patches for RX-51 add support that builded U-Boot binary can
> be loaded and booted by NOLO. So U-Boot will be 3rd bootloader.
>
> Patches are on top of revision bd2313078114c4b44c4a5ce149af43bcb7fc8854 and
> working fine. I rebased these patches on top of u-boot git master
> repository, but booting failed. No output on device. Using git bisect I
> found that problem appeared at revision
>
> 561142af20f1fd7b425d9425730014e656defb91
> ARM: implement relocation for ARM V7 (OMAP)
>
> If I defined CONFIG_SYS_ARM_WITHOUT_RELOC U-Boot working and booting fine
> up to revision a9aa3926295df759306258e5e24cace414f53b67
>
> So problem is that relocation patches broke RX-51 support. Can somebody
> help me how to rewrite/port rx-51 patches to work with ARM relocation (do
> not forget that U-Boot is loaded by 2nd bootloader to RAM after HW is
> initialized by NOLO)? If U-Boot will be working on RX-51 I will prepair
> patches for upstreaming.
Does NOLO enable MMU ?
btw can you post the patches to the ML for review ?
Cheers
next prev parent reply other threads:[~2011-09-01 8:46 UTC|newest]
Thread overview: 111+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-01 8:42 [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900) Pali Rohár
2011-09-01 8:46 ` Marek Vasut [this message]
2011-09-01 9:06 ` Pali Rohár
2011-09-01 9:39 ` Marek Vasut
2011-09-01 9:02 ` Stefano Babic
2011-09-01 9:09 ` Pali Rohár
2011-09-01 9:24 ` Stefano Babic
2011-09-01 10:49 ` Pali Rohár
2011-09-01 11:04 ` Marek Vasut
2011-09-01 11:34 ` [U-Boot] [PATCH 01/15] Make bootm optionally use pre-existing atags for Linux kernel boot Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 02/15] Store existing atags at startup if chainloading Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 03/15] Nokia RX-51 aka N900 support Pali Rohár
2011-09-01 13:57 ` Mike Frysinger
2011-10-09 0:20 ` Pali Rohár
2011-10-09 15:59 ` Mike Frysinger
2011-10-12 15:10 ` Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 04/15] Only delay boot if keyboard open Pali Rohár
2011-09-01 13:58 ` Mike Frysinger
2011-10-08 23:29 ` Pali Rohár
2011-10-09 16:00 ` Mike Frysinger
2011-09-01 11:34 ` [U-Boot] [PATCH 05/15] Change Wireless LAN mode from M4 to M0 Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 06/15] Look for boot.scr on 'mmc 0:3' instead 'mmc 0' and add support for loading boot.scr from 'mmc 2:1' Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 07/15] RX-51: Fixed compilation on top of master (changes from Beagle Board) Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 08/15] RX-51: Add support for resetting twl4030 watchdog Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 09/15] RX-51: Fix keymap Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 10/15] include/common.h: Add some macros for ANSI escape codes Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 11/15] drivers/video/cfb_console.c: Added support " Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 12/15] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-09-01 13:59 ` Mike Frysinger
2011-10-08 23:31 ` Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 13/15] New config variable CONFIG_MENU Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 14/15] New config variable CONFIG_PREMONITOR Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu Pali Rohár
2011-09-01 13:52 ` [U-Boot] [PATCH 01/15] Make bootm optionally use pre-existing atags for Linux kernel boot Mike Frysinger
2011-10-08 23:37 ` Pali Rohár
2011-09-01 11:53 ` [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-10-09 0:24 ` Pali Rohár
2011-09-01 17:11 ` Pali Rohár
2011-12-17 16:59 ` [U-Boot] " Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 01/16] arch/arm/cpu/armv7/omap3/lowlevel_init.S: save_boot_params Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 02/16] arch/arm/lib/bootm.c: Optionally use existing atags Pali Rohár
2011-12-18 18:54 ` Mike Frysinger
2011-12-18 20:12 ` Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 03/16] include/twl4030.h: Add power bus message definitions Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 04/16] include/common.h: Add some ANSI escape codes definitions Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 05/16] common/main.c: Fix function readline Pali Rohár
2011-12-18 18:58 ` Mike Frysinger
2011-12-18 20:12 ` Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 06/16] drivers/video/cfb_console.c: Fix function console_scrollup Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 07/16] drivers/video/cfb_console.c: Add function console_swap_colors Pali Rohár
2011-12-18 18:57 ` Mike Frysinger
2011-12-18 19:00 ` Pali Rohár
2011-12-18 20:06 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 08/16] drivers/video/cfb_console.c: Add function console_clear and console_clear_line Pali Rohár
2011-12-18 19:00 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 09/16] drivers/video/cfb_console.c: Add functions for moving with cursor Pali Rohár
2011-12-18 19:00 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 10/16] drivers/video/cfb_console.c: Add support for some ANSI terminal escape codes Pali Rohár
2011-12-18 19:01 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 11/16] New command clr: Clear the ANSI terminal Pali Rohár
2011-12-18 18:56 ` Mike Frysinger
2011-12-18 19:20 ` Pali Rohár
2011-12-18 20:07 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 12/16] New config variable CONFIG_MENUCMD Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 13/16] New config variable CONFIG_PREMONITOR Pali Rohár
2011-12-18 19:05 ` Mike Frysinger
2011-12-18 19:37 ` Pali Rohár
2011-12-18 20:08 ` Mike Frysinger
2011-12-18 20:14 ` Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 14/16] New board support: Nokia RX-51 aka N900 Pali Rohár
2011-12-18 19:06 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 15/16] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-12-18 19:07 ` Mike Frysinger
2011-12-18 19:12 ` Pali Rohár
2011-12-18 20:07 ` Mike Frysinger
2011-12-18 20:16 ` Pali Rohár
2012-01-06 6:59 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 16/16] RX-51: Add support for bootmenu Pali Rohár
2011-12-17 19:25 ` [U-Boot] U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-12-18 10:13 ` Pali Rohár
2011-12-18 12:42 ` Wolfgang Denk
2011-12-18 19:01 ` Mike Frysinger
2011-12-18 20:10 ` Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH v3] " Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH 01/15] arch/arm/cpu/armv7/omap3/lowlevel_init.S: save_boot_params Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH 02/15] arch/arm/lib/bootm.c: Optionally use existing atags Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH 03/15] include/twl4030.h: Add power bus message definitions Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 04/15] include/common.h: Add some ANSI escape codes definitions Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 05/15] common/main.c: Fix function readline Pali Rohár
2012-01-06 20:15 ` Mike Frysinger
2012-01-07 8:51 ` Pali Rohár
2012-02-27 4:33 ` Mike Frysinger
2012-02-27 18:40 ` Pali Rohár
2012-02-27 20:20 ` Mike Frysinger
2011-12-18 21:34 ` [U-Boot] [PATCH 06/15] drivers/video/cfb_console.c: Fix function console_scrollup Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 07/15] drivers/video/cfb_console.c: Add function console_clear and console_clear_line Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 08/15] drivers/video/cfb_console.c: Add functions for moving with cursor Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 09/15] drivers/video/cfb_console.c: Add support for some ANSI terminal escape codes Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 10/15] New command clear: Clear the ANSI terminal Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 11/15] New config variable CONFIG_MENUCMD Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 12/15] New config variable CONFIG_PREMONITOR Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 13/15] New board support: Nokia RX-51 aka N900 Pali Rohár
2012-01-03 16:05 ` Tom Rini
2012-01-10 13:14 ` Pali Rohár
2012-01-10 14:53 ` Tom Rini
2011-12-18 21:34 ` [U-Boot] [PATCH 14/15] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu Pali Rohár
2012-01-03 16:06 ` Tom Rini
2011-12-18 23:57 ` [U-Boot] [PATCH v3] U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-12-19 7:17 ` Pali Rohár
2011-12-19 8:43 ` Graeme Russ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201109011046.38556.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.