All of lore.kernel.org
 help / color / mirror / Atom feed
From: Amit Virdi <amit.virdi@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 04/25] SPEAr: Configure network support for spear SoCs
Date: Wed, 7 Mar 2012 17:33:53 +0530	[thread overview]
Message-ID: <1331121854-20494-5-git-send-email-amit.virdi@st.com> (raw)
In-Reply-To: <1331121854-20494-1-git-send-email-amit.virdi@st.com>

From: Vipin KUMAR <vipin.kumar@st.com>

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
---
 arch/arm/include/asm/arch-spear/hardware.h |    1 +
 board/spear/spear300/spear300.c            |   10 ++++++++++
 board/spear/spear310/spear310.c            |   10 ++++++++++
 board/spear/spear320/spear320.c            |   10 ++++++++++
 board/spear/spear600/spear600.c            |   10 ++++++++++
 include/configs/spear-common.h             |   14 ++++++++++++--
 include/configs/spear3xx.h                 |    3 +++
 7 files changed, 56 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-spear/hardware.h b/arch/arm/include/asm/arch-spear/hardware.h
index a6517b2..2b9cb0e 100644
--- a/arch/arm/include/asm/arch-spear/hardware.h
+++ b/arch/arm/include/asm/arch-spear/hardware.h
@@ -31,6 +31,7 @@
 #define CONFIG_SPEAR_SYSCNTLBASE		(0xFCA00000)
 #define CONFIG_SPEAR_TIMERBASE			(0xFC800000)
 #define CONFIG_SPEAR_MISCBASE			(0xFCA80000)
+#define CONFIG_SPEAR_ETHBASE			(0xE0800000)
 
 #define CONFIG_SYS_NAND_CLE			(1 << 16)
 #define CONFIG_SYS_NAND_ALE			(1 << 17)
diff --git a/board/spear/spear300/spear300.c b/board/spear/spear300/spear300.c
index 32bcb77..3f7ccb8 100644
--- a/board/spear/spear300/spear300.c
+++ b/board/spear/spear300/spear300.c
@@ -22,6 +22,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include <nand.h>
 #include <asm/io.h>
 #include <linux/mtd/fsmc_nand.h>
@@ -57,3 +58,12 @@ int board_nand_init(struct nand_chip *nand)
 #endif
 	return -1;
 }
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_DESIGNWARE_ETH)
+	return designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY);
+#else
+	return -1;
+#endif
+}
diff --git a/board/spear/spear310/spear310.c b/board/spear/spear310/spear310.c
index 8b58218..8c5b5ba 100644
--- a/board/spear/spear310/spear310.c
+++ b/board/spear/spear310/spear310.c
@@ -23,6 +23,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include <nand.h>
 #include <asm/io.h>
 #include <linux/mtd/fsmc_nand.h>
@@ -58,3 +59,12 @@ int board_nand_init(struct nand_chip *nand)
 #endif
 	return -1;
 }
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_DESIGNWARE_ETH)
+	return designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY);
+#else
+	return -1;
+#endif
+}
diff --git a/board/spear/spear320/spear320.c b/board/spear/spear320/spear320.c
index 172ad35..b60acc2 100644
--- a/board/spear/spear320/spear320.c
+++ b/board/spear/spear320/spear320.c
@@ -23,6 +23,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include <nand.h>
 #include <asm/io.h>
 #include <linux/mtd/fsmc_nand.h>
@@ -58,3 +59,12 @@ int board_nand_init(struct nand_chip *nand)
 #endif
 	return -1;
 }
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_DESIGNWARE_ETH)
+	return designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY);
+#else
+	return -1;
+#endif
+}
diff --git a/board/spear/spear600/spear600.c b/board/spear/spear600/spear600.c
index 7cf63d6..5a32b7f 100644
--- a/board/spear/spear600/spear600.c
+++ b/board/spear/spear600/spear600.c
@@ -22,6 +22,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include <nand.h>
 #include <asm/io.h>
 #include <linux/mtd/fsmc_nand.h>
@@ -52,3 +53,12 @@ int board_nand_init(struct nand_chip *nand)
 #endif
 	return -1;
 }
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_DESIGNWARE_ETH)
+	return designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY);
+#else
+	return -1;
+#endif
+}
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index 8f4973a..3f52442 100644
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -27,6 +27,14 @@
  * Common configurations used for both spear3xx as well as spear6xx
  */
 
+/* Ethernet driver configuration */
+#define CONFIG_MII
+#define CONFIG_DESIGNWARE_ETH
+#define CONFIG_DW_SEARCH_PHY
+#define CONFIG_DW0_PHY				1
+#define CONFIG_NET_MULTI
+#define CONFIG_PHY_RESET_DELAY			(10000)		/* in usec */
+
 /* USBD driver configuration */
 #define CONFIG_DW_UDC
 #define CONFIG_USB_DEVICE
@@ -103,11 +111,13 @@
 #define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_RUN
 #define CONFIG_CMD_SAVES
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
 
 /* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <config_cmd_default.h>
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
 
 /*
  * Default Environment Varible definitions
diff --git a/include/configs/spear3xx.h b/include/configs/spear3xx.h
index 2a86c21..035b321 100644
--- a/include/configs/spear3xx.h
+++ b/include/configs/spear3xx.h
@@ -41,6 +41,9 @@
 
 #include <configs/spear-common.h>
 
+/* Ethernet driver configuration */
+#define CONFIG_DW_ALTDESCRIPTOR			1
+
 /* Serial Configuration (PL011) */
 #define CONFIG_SYS_SERIAL0			0xD0000000
 
-- 
1.7.2.2

  parent reply	other threads:[~2012-03-07 12:03 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-07 12:03 [U-Boot] [PATCH 00/25] SPEAr: Update platform support for SPEAr3xx/6xx Amit Virdi
2012-03-07 12:03 ` [U-Boot] [PATCH 01/25] SPEAr: Fix ARM relocation support Amit Virdi
2012-03-07 13:11   ` Stefan Roese
2012-03-07 12:03 ` [U-Boot] [PATCH 02/25] SPEAr: Eliminate dependency on Xloader table Amit Virdi
2012-03-07 13:16   ` Stefan Roese
2012-03-07 12:03 ` [U-Boot] [PATCH 03/25] SPEAr: Place ethaddr write and read within CONFIG_CMD_NET Amit Virdi
2012-03-07 13:21   ` Stefan Roese
2012-03-07 13:29     ` Mike Frysinger
2012-03-26 11:23     ` Amit Virdi
2012-03-26 13:15       ` Wolfgang Denk
2012-03-07 12:03 ` Amit Virdi [this message]
2012-03-07 13:29   ` [U-Boot] [PATCH 04/25] SPEAr: Configure network support for spear SoCs Stefan Roese
2012-03-26 11:41     ` Amit Virdi
2012-03-26 11:51       ` Stefan Roese
2012-03-07 12:03 ` [U-Boot] [PATCH 05/25] SPEAr: Add macb driver support for spear310 and spear320 Amit Virdi
2012-03-07 12:03 ` [U-Boot] [PATCH 06/25] SPEAr: Add interface information in initialization Amit Virdi
2012-03-07 12:03 ` [U-Boot] [PATCH 07/25] SPEAr: Add basic arch related support for SPEAr SoCs Amit Virdi
2012-03-07 13:49   ` Stefan Roese
2012-03-12 12:30     ` Amit Virdi
2012-03-07 12:03 ` [U-Boot] [PATCH 08/25] SPEAr: Add configuration options for spear3xx and spear6xx boards Amit Virdi
2012-03-07 13:54   ` Stefan Roese
2012-03-26 12:10     ` Amit Virdi
2012-03-26 12:30       ` Stefan Roese
2012-03-27  5:59         ` Amit Virdi
2012-03-07 12:03 ` [U-Boot] [PATCH 09/25] SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK) Amit Virdi
2012-03-07 13:56   ` Stefan Roese
2012-03-07 12:03 ` [U-Boot] [PATCH 10/25] SPEAr: Change the default environment variables Amit Virdi
2012-03-07 14:03   ` Stefan Roese
2012-03-12 12:38     ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 11/25] SPEAr: Initialize SNOR in early_board_init_f Amit Virdi
2012-03-07 14:06   ` Stefan Roese
2012-03-07 12:04 ` [U-Boot] [PATCH 12/25] SPEAr: Enable usb device high speed support Amit Virdi
2012-03-07 14:07   ` Stefan Roese
2012-03-12 12:39     ` Amit Virdi
2012-03-26 12:15       ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 13/25] SPEAr: spear usbtty configuration does not use ethernet device Amit Virdi
2012-03-07 14:14   ` Stefan Roese
2012-03-12 13:12     ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 14/25] SPEAr: Enable udc and usb-console support only for usbtty configuration Amit Virdi
2012-03-07 14:15   ` Stefan Roese
2012-03-07 12:04 ` [U-Boot] [PATCH 15/25] SPEAr: Enable autoneg for ethernet Amit Virdi
2012-03-07 14:18   ` Stefan Roese
2012-03-27  9:02     ` Amit Virdi
2012-03-27  9:20       ` Stefan Roese
2012-03-27  9:24         ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 16/25] SPEAr: Enable dcache for fast file transfer Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 17/25] SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION Amit Virdi
2012-03-07 14:25   ` Stefan Roese
2012-03-27  6:39     ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 18/25] SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE Amit Virdi
2012-03-07 14:31   ` Stefan Roese
2012-03-27  6:38     ` Amit Virdi
2012-03-27  7:05       ` Stefan Roese
2012-03-27  7:42         ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 19/25] SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro Amit Virdi
2012-03-07 14:32   ` Stefan Roese
2012-03-27  6:11     ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 20/25] SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb Amit Virdi
2012-03-07 14:34   ` Stefan Roese
2012-03-27  6:09     ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 21/25] SPEAr: explicitly select clk src for UART Amit Virdi
2012-03-07 14:36   ` Stefan Roese
2012-03-07 12:04 ` [U-Boot] [PATCH 22/25] SPEAr: Correct SoC ID offset in misc configuration space Amit Virdi
2012-03-07 14:36   ` Stefan Roese
2012-03-07 12:04 ` [U-Boot] [PATCH 23/25] SPEAr: Use separate config flags for 3xx and 6xx board files Amit Virdi
2012-03-07 14:38   ` Stefan Roese
2012-03-12 13:57     ` Amit Virdi
2012-03-12 14:17       ` Stefan Roese
2012-03-07 12:04 ` [U-Boot] [PATCH 24/25] cleanup/SPEAr: Remove unnecessary parenthesis Amit Virdi
2012-03-07 14:41   ` Stefan Roese
2012-03-07 14:46     ` Stefan Roese
2012-03-12 13:52       ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 25/25] cleanup/SPEAr: Define configuration flags more elegantly Amit Virdi
2012-03-07 14:42   ` Stefan Roese
2012-03-07 13:15 ` [U-Boot] [PATCH 00/25] SPEAr: Update platform support for SPEAr3xx/6xx Stefan Roese
2012-03-07 13:56   ` Amit Virdi
2012-03-09  7:29   ` Vipin Kumar
2012-03-09  7:47     ` Stefan Roese
2012-03-09  8:47       ` Vipin Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1331121854-20494-5-git-send-email-amit.virdi@st.com \
    --to=amit.virdi@st.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.