From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 20/25] SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb
Date: Wed, 7 Mar 2012 15:34:08 +0100 [thread overview]
Message-ID: <201203071534.08243.sr@denx.de> (raw)
In-Reply-To: <1331121854-20494-21-git-send-email-amit.virdi@st.com>
On Wednesday 07 March 2012 13:04:09 Amit Virdi wrote:
> From: Vipin Kumar <vipin.kumar@st.com>
>
> Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
> Signed-off-by: Amit Virdi <amit.virdi@st.com>
> ---
> include/configs/spear-common.h | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/include/configs/spear-common.h
> b/include/configs/spear-common.h index bde99d2..4fb56ba 100644
> --- a/include/configs/spear-common.h
> +++ b/include/configs/spear-common.h
> @@ -104,6 +104,8 @@
> #define CONFIG_NAND_FSMC
> #define CONFIG_SYS_MAX_NAND_DEVICE 1
> #define CONFIG_MTD_NAND_VERIFY_WRITE 1
> +#define CONFIG_SYS_NAND_ONFI_DETECTION 1
> +#define CONFIG_SYS_NAND_QUIET_TEST 1
Remove the "1"'s please. And please also remove CONFIG_MTD_NAND_VERIFY_WRITE.
Or is it really needed? I didn't need it on my SPEAr600 boards. And it slows
NAND access unnecessarily down.
Other than this:
Acked-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
next prev parent reply other threads:[~2012-03-07 14:34 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-07 12:03 [U-Boot] [PATCH 00/25] SPEAr: Update platform support for SPEAr3xx/6xx Amit Virdi
2012-03-07 12:03 ` [U-Boot] [PATCH 01/25] SPEAr: Fix ARM relocation support Amit Virdi
2012-03-07 13:11 ` Stefan Roese
2012-03-07 12:03 ` [U-Boot] [PATCH 02/25] SPEAr: Eliminate dependency on Xloader table Amit Virdi
2012-03-07 13:16 ` Stefan Roese
2012-03-07 12:03 ` [U-Boot] [PATCH 03/25] SPEAr: Place ethaddr write and read within CONFIG_CMD_NET Amit Virdi
2012-03-07 13:21 ` Stefan Roese
2012-03-07 13:29 ` Mike Frysinger
2012-03-26 11:23 ` Amit Virdi
2012-03-26 13:15 ` Wolfgang Denk
2012-03-07 12:03 ` [U-Boot] [PATCH 04/25] SPEAr: Configure network support for spear SoCs Amit Virdi
2012-03-07 13:29 ` Stefan Roese
2012-03-26 11:41 ` Amit Virdi
2012-03-26 11:51 ` Stefan Roese
2012-03-07 12:03 ` [U-Boot] [PATCH 05/25] SPEAr: Add macb driver support for spear310 and spear320 Amit Virdi
2012-03-07 12:03 ` [U-Boot] [PATCH 06/25] SPEAr: Add interface information in initialization Amit Virdi
2012-03-07 12:03 ` [U-Boot] [PATCH 07/25] SPEAr: Add basic arch related support for SPEAr SoCs Amit Virdi
2012-03-07 13:49 ` Stefan Roese
2012-03-12 12:30 ` Amit Virdi
2012-03-07 12:03 ` [U-Boot] [PATCH 08/25] SPEAr: Add configuration options for spear3xx and spear6xx boards Amit Virdi
2012-03-07 13:54 ` Stefan Roese
2012-03-26 12:10 ` Amit Virdi
2012-03-26 12:30 ` Stefan Roese
2012-03-27 5:59 ` Amit Virdi
2012-03-07 12:03 ` [U-Boot] [PATCH 09/25] SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK) Amit Virdi
2012-03-07 13:56 ` Stefan Roese
2012-03-07 12:03 ` [U-Boot] [PATCH 10/25] SPEAr: Change the default environment variables Amit Virdi
2012-03-07 14:03 ` Stefan Roese
2012-03-12 12:38 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 11/25] SPEAr: Initialize SNOR in early_board_init_f Amit Virdi
2012-03-07 14:06 ` Stefan Roese
2012-03-07 12:04 ` [U-Boot] [PATCH 12/25] SPEAr: Enable usb device high speed support Amit Virdi
2012-03-07 14:07 ` Stefan Roese
2012-03-12 12:39 ` Amit Virdi
2012-03-26 12:15 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 13/25] SPEAr: spear usbtty configuration does not use ethernet device Amit Virdi
2012-03-07 14:14 ` Stefan Roese
2012-03-12 13:12 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 14/25] SPEAr: Enable udc and usb-console support only for usbtty configuration Amit Virdi
2012-03-07 14:15 ` Stefan Roese
2012-03-07 12:04 ` [U-Boot] [PATCH 15/25] SPEAr: Enable autoneg for ethernet Amit Virdi
2012-03-07 14:18 ` Stefan Roese
2012-03-27 9:02 ` Amit Virdi
2012-03-27 9:20 ` Stefan Roese
2012-03-27 9:24 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 16/25] SPEAr: Enable dcache for fast file transfer Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 17/25] SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION Amit Virdi
2012-03-07 14:25 ` Stefan Roese
2012-03-27 6:39 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 18/25] SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE Amit Virdi
2012-03-07 14:31 ` Stefan Roese
2012-03-27 6:38 ` Amit Virdi
2012-03-27 7:05 ` Stefan Roese
2012-03-27 7:42 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 19/25] SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro Amit Virdi
2012-03-07 14:32 ` Stefan Roese
2012-03-27 6:11 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 20/25] SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb Amit Virdi
2012-03-07 14:34 ` Stefan Roese [this message]
2012-03-27 6:09 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 21/25] SPEAr: explicitly select clk src for UART Amit Virdi
2012-03-07 14:36 ` Stefan Roese
2012-03-07 12:04 ` [U-Boot] [PATCH 22/25] SPEAr: Correct SoC ID offset in misc configuration space Amit Virdi
2012-03-07 14:36 ` Stefan Roese
2012-03-07 12:04 ` [U-Boot] [PATCH 23/25] SPEAr: Use separate config flags for 3xx and 6xx board files Amit Virdi
2012-03-07 14:38 ` Stefan Roese
2012-03-12 13:57 ` Amit Virdi
2012-03-12 14:17 ` Stefan Roese
2012-03-07 12:04 ` [U-Boot] [PATCH 24/25] cleanup/SPEAr: Remove unnecessary parenthesis Amit Virdi
2012-03-07 14:41 ` Stefan Roese
2012-03-07 14:46 ` Stefan Roese
2012-03-12 13:52 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 25/25] cleanup/SPEAr: Define configuration flags more elegantly Amit Virdi
2012-03-07 14:42 ` Stefan Roese
2012-03-07 13:15 ` [U-Boot] [PATCH 00/25] SPEAr: Update platform support for SPEAr3xx/6xx Stefan Roese
2012-03-07 13:56 ` Amit Virdi
2012-03-09 7:29 ` Vipin Kumar
2012-03-09 7:47 ` Stefan Roese
2012-03-09 8:47 ` Vipin Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201203071534.08243.sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.