[PATCH v2 03/15] FRV: mark const init data with __initconst instead of __initdata

["Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>]

As long as there is no other non-const variable marked __initdata in the
same compilation unit it doesn't hurt. If there were one however
compilation would fail with

	error: $variablename causes a section type conflict

because a section containing const variables is marked read only and so
cannot contain non-const variables.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: David Howells <dhowells@redhat.com>
---
no changes since (implicit) v1

 arch/frv/mb93090-mb00/pci-irq.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/frv/mb93090-mb00/pci-irq.c b/arch/frv/mb93090-mb00/pci-irq.c
index 20f6497..808bcf7 100644
--- a/arch/frv/mb93090-mb00/pci-irq.c
+++ b/arch/frv/mb93090-mb00/pci-irq.c
@@ -28,7 +28,7 @@
  *
  */
 
-static const uint8_t __initdata pci_bus0_irq_routing[32][4] = {
+static const uint8_t pci_bus0_irq_routing[32][4] __initconst = {
 	[0 ] = { IRQ_FPGA_MB86943_PCI_INTA },
 	[16] = { IRQ_FPGA_RTL8029_INTA },
 	[17] = { IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB },
-- 
1.7.9.5