* [U-Boot] Pull request for u-boot-marvell.git [not found] <DCB55AE5D43FB64FA6D3F5573FA2D42B19FD1E0BDE@SC-VEXCH4.marvell.com> @ 2012-02-08 9:57 ` Prafulla Wadaskar 2012-02-10 19:58 ` Albert ARIBAUD 0 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2012-02-08 9:57 UTC (permalink / raw) To: u-boot Dear Albert Please kindly pull The following changes since commit ca849aa4b86b282f837c58a0b129460ebfad2239: David M??ller (ELSOFT AG) (1): ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board are available in the git repository at: u-boot-marvell.git master branch. Albert ARIBAUD (5): edminiv2: add hush parser, cmdline editing and long help Rename ehci-kirkwood as ehci-marvell Remove kirkwood-specifics from marvell EHCI driver orion5x: add USB host ehci-marvell support edminiv2: add USB host support Holger Brunck (2): arm/km: speed up i2c access for keymile boards arm/km: checkpatch cleanup Ian Campbell (1): kirkwood_spi: correct access to irq_mask register Michael Walle (1): arm, arm-kirkwood: disable l2c before linux boot Prafulla Wadaskar (1): bugfix: all Marvell specific build fails due to undefined reference to `get_ticks' Stefan (1): kirkwood: add support for D-Link DNS-325 MAINTAINERS | 4 + arch/arm/cpu/arm926ejs/armada100/timer.c | 18 ++ arch/arm/cpu/arm926ejs/cache.c | 9 + arch/arm/cpu/arm926ejs/cpu.c | 2 + arch/arm/cpu/arm926ejs/kirkwood/Makefile | 1 + arch/arm/cpu/arm926ejs/kirkwood/cache.c | 34 ++++ arch/arm/cpu/arm926ejs/kirkwood/timer.c | 18 ++ arch/arm/cpu/arm926ejs/orion5x/timer.c | 18 ++ arch/arm/cpu/arm926ejs/pantheon/timer.c | 18 ++ arch/arm/include/asm/arch-kirkwood/config.h | 2 +- arch/arm/include/asm/arch-kirkwood/kirkwood.h | 12 ++ arch/arm/include/asm/arch-orion5x/orion5x.h | 12 ++ board/d-link/dns325/Makefile | 49 +++++ board/d-link/dns325/dns325.c | 148 ++++++++++++++ board/d-link/dns325/dns325.h | 48 +++++ board/d-link/dns325/kwbimage.cfg | 208 ++++++++++++++++++++ board/keymile/km_arm/km_arm.c | 23 +-- boards.cfg | 1 + drivers/spi/kirkwood_spi.c | 2 +- drivers/usb/host/Makefile | 2 +- .../usb/host/{ehci-kirkwood.c => ehci-marvell.c} | 36 ++-- include/configs/dns325.h | 188 ++++++++++++++++++ include/configs/edminiv2.h | 24 +++ include/configs/km/km_arm.h | 2 +- 24 files changed, 849 insertions(+), 30 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/kirkwood/cache.c create mode 100644 board/d-link/dns325/Makefile create mode 100644 board/d-link/dns325/dns325.c create mode 100644 board/d-link/dns325/dns325.h create mode 100644 board/d-link/dns325/kwbimage.cfg rename drivers/usb/host/{ehci-kirkwood.c => ehci-marvell.c} (73%) create mode 100644 include/configs/dns325.h Regards.. Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-02-08 9:57 ` [U-Boot] Pull request for u-boot-marvell.git Prafulla Wadaskar @ 2012-02-10 19:58 ` Albert ARIBAUD 2012-03-02 7:29 ` Prafulla Wadaskar ` (3 more replies) 0 siblings, 4 replies; 65+ messages in thread From: Albert ARIBAUD @ 2012-02-10 19:58 UTC (permalink / raw) To: u-boot Hi Prafulla, Le 08/02/2012 10:57, Prafulla Wadaskar a ?crit : > Dear Albert > > Please kindly pull > > The following changes since commit ca849aa4b86b282f837c58a0b129460ebfad2239: > David M??ller (ELSOFT AG) (1): > ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board > > are available in the git repository at: > > u-boot-marvell.git master branch. > > Albert ARIBAUD (5): > edminiv2: add hush parser, cmdline editing and long help > Rename ehci-kirkwood as ehci-marvell > Remove kirkwood-specifics from marvell EHCI driver > orion5x: add USB host ehci-marvell support > edminiv2: add USB host support > > Holger Brunck (2): > arm/km: speed up i2c access for keymile boards > arm/km: checkpatch cleanup > > Ian Campbell (1): > kirkwood_spi: correct access to irq_mask register > > Michael Walle (1): > arm, arm-kirkwood: disable l2c before linux boot > > Prafulla Wadaskar (1): > bugfix: all Marvell specific build fails due to undefined reference to `get_ticks' > > Stefan (1): > kirkwood: add support for D-Link DNS-325 > > MAINTAINERS | 4 + > arch/arm/cpu/arm926ejs/armada100/timer.c | 18 ++ > arch/arm/cpu/arm926ejs/cache.c | 9 + > arch/arm/cpu/arm926ejs/cpu.c | 2 + > arch/arm/cpu/arm926ejs/kirkwood/Makefile | 1 + > arch/arm/cpu/arm926ejs/kirkwood/cache.c | 34 ++++ > arch/arm/cpu/arm926ejs/kirkwood/timer.c | 18 ++ > arch/arm/cpu/arm926ejs/orion5x/timer.c | 18 ++ > arch/arm/cpu/arm926ejs/pantheon/timer.c | 18 ++ > arch/arm/include/asm/arch-kirkwood/config.h | 2 +- > arch/arm/include/asm/arch-kirkwood/kirkwood.h | 12 ++ > arch/arm/include/asm/arch-orion5x/orion5x.h | 12 ++ > board/d-link/dns325/Makefile | 49 +++++ > board/d-link/dns325/dns325.c | 148 ++++++++++++++ > board/d-link/dns325/dns325.h | 48 +++++ > board/d-link/dns325/kwbimage.cfg | 208 ++++++++++++++++++++ > board/keymile/km_arm/km_arm.c | 23 +-- > boards.cfg | 1 + > drivers/spi/kirkwood_spi.c | 2 +- > drivers/usb/host/Makefile | 2 +- > .../usb/host/{ehci-kirkwood.c => ehci-marvell.c} | 36 ++-- > include/configs/dns325.h | 188 ++++++++++++++++++ > include/configs/edminiv2.h | 24 +++ > include/configs/km/km_arm.h | 2 +- > 24 files changed, 849 insertions(+), 30 deletions(-) > create mode 100644 arch/arm/cpu/arm926ejs/kirkwood/cache.c > create mode 100644 board/d-link/dns325/Makefile > create mode 100644 board/d-link/dns325/dns325.c > create mode 100644 board/d-link/dns325/dns325.h > create mode 100644 board/d-link/dns325/kwbimage.cfg > rename drivers/usb/host/{ehci-kirkwood.c => ehci-marvell.c} (73%) > create mode 100644 include/configs/dns325.h Applied to u-boot-arm/master, thanks! > Regards.. > Prafulla . . . Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-02-10 19:58 ` Albert ARIBAUD @ 2012-03-02 7:29 ` Prafulla Wadaskar 2012-03-05 12:38 ` Albert ARIBAUD 2012-04-20 6:10 ` Prafulla Wadaskar ` (2 subsequent siblings) 3 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2012-03-02 7:29 UTC (permalink / raw) To: u-boot Hi Albert Please kindly pull The following changes since commit 2271e7c6e8eef883b834fb7d07911848a54fde13: prabhakar.csengg at gmail.com (1): Ethernut 5: fix build error are available in the git repository at: u-boot-marvell.git on next branch. Ajay Bhargav (4): USB: Armada100: Add UTMI PHY interface driver USB: Armada100: EHCI Driver for Armada100 SOCs Armada100: gplugD: Add USB command support Armada100: gplugD: Add FAT & EXT2 command support Ian Campbell (1): ARM: dreamplug: Enable FDT support arch/arm/include/asm/arch-armada100/armada100.h | 9 ++ .../include/asm/arch-armada100/utmi-armada100.h | 79 ++++++++++++++++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-armada100.c | 64 +++++++++++++ drivers/usb/host/utmi-armada100.c | 96 ++++++++++++++++++++ include/configs/dreamplug.h | 2 + include/configs/gplugd.h | 14 +++ 7 files changed, 265 insertions(+), 0 deletions(-) create mode 100644 arch/arm/include/asm/arch-armada100/utmi-armada100.h create mode 100644 drivers/usb/host/ehci-armada100.c create mode 100644 drivers/usb/host/utmi-armada100.c Regards.. Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-03-02 7:29 ` Prafulla Wadaskar @ 2012-03-05 12:38 ` Albert ARIBAUD 0 siblings, 0 replies; 65+ messages in thread From: Albert ARIBAUD @ 2012-03-05 12:38 UTC (permalink / raw) To: u-boot Hi Prafulla, Le 02/03/2012 08:29, Prafulla Wadaskar a ?crit : > Hi Albert > > Please kindly pull > > The following changes since commit 2271e7c6e8eef883b834fb7d07911848a54fde13: > prabhakar.csengg at gmail.com (1): > Ethernut 5: fix build error > > are available in the git repository at: > > u-boot-marvell.git on next branch. > > Ajay Bhargav (4): > USB: Armada100: Add UTMI PHY interface driver > USB: Armada100: EHCI Driver for Armada100 SOCs > Armada100: gplugD: Add USB command support > Armada100: gplugD: Add FAT& EXT2 command support > > Ian Campbell (1): > ARM: dreamplug: Enable FDT support > > arch/arm/include/asm/arch-armada100/armada100.h | 9 ++ > .../include/asm/arch-armada100/utmi-armada100.h | 79 ++++++++++++++++ > drivers/usb/host/Makefile | 1 + > drivers/usb/host/ehci-armada100.c | 64 +++++++++++++ > drivers/usb/host/utmi-armada100.c | 96 ++++++++++++++++++++ > include/configs/dreamplug.h | 2 + > include/configs/gplugd.h | 14 +++ > 7 files changed, 265 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/include/asm/arch-armada100/utmi-armada100.h > create mode 100644 drivers/usb/host/ehci-armada100.c > create mode 100644 drivers/usb/host/utmi-armada100.c > > Regards.. > Prafulla . . . Applied to u-boot-arm/next, thanks. I will move next to master and send out a pull request once 2012.03 is out. Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-02-10 19:58 ` Albert ARIBAUD 2012-03-02 7:29 ` Prafulla Wadaskar @ 2012-04-20 6:10 ` Prafulla Wadaskar 2012-04-20 6:46 ` Albert ARIBAUD 2012-07-03 11:59 ` Prafulla Wadaskar 2012-07-03 12:00 ` Prafulla Wadaskar 3 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2012-04-20 6:10 UTC (permalink / raw) To: u-boot Dear Albert Please kindly pull The following changes since commit fb14b6b2f680363678b4e6a75eb9f3f0d79111fa: Wolfgang Denk (1): Prepare v2012.04-rc3 are available in the git repository at: u-boot-marvell.git master branch. David Purdy (1): kirkwood: add support for Cloud Engines Pogoplug E02 Luka Perkov (1): kirkwood: add NAS62x0 board support MAINTAINERS | 8 ++ board/cloudengines/pogo_e02/Makefile | 43 ++++++++ board/cloudengines/pogo_e02/kwbimage.cfg | 169 ++++++++++++++++++++++++++++++ board/cloudengines/pogo_e02/pogo_e02.c | 118 +++++++++++++++++++++ board/cloudengines/pogo_e02/pogo_e02.h | 44 ++++++++ board/raidsonic/ib62x0/Makefile | 43 ++++++++ board/raidsonic/ib62x0/ib62x0.c | 79 ++++++++++++++ board/raidsonic/ib62x0/ib62x0.h | 40 +++++++ board/raidsonic/ib62x0/kwbimage.cfg | 169 ++++++++++++++++++++++++++++++ boards.cfg | 2 + include/configs/ib62x0.h | 152 +++++++++++++++++++++++++++ include/configs/pogo_e02.h | 119 +++++++++++++++++++++ 12 files changed, 986 insertions(+), 0 deletions(-) create mode 100644 board/cloudengines/pogo_e02/Makefile create mode 100644 board/cloudengines/pogo_e02/kwbimage.cfg create mode 100644 board/cloudengines/pogo_e02/pogo_e02.c create mode 100644 board/cloudengines/pogo_e02/pogo_e02.h create mode 100644 board/raidsonic/ib62x0/Makefile create mode 100644 board/raidsonic/ib62x0/ib62x0.c create mode 100644 board/raidsonic/ib62x0/ib62x0.h create mode 100644 board/raidsonic/ib62x0/kwbimage.cfg create mode 100644 include/configs/ib62x0.h create mode 100644 include/configs/pogo_e02.h Regards.. Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-04-20 6:10 ` Prafulla Wadaskar @ 2012-04-20 6:46 ` Albert ARIBAUD 0 siblings, 0 replies; 65+ messages in thread From: Albert ARIBAUD @ 2012-04-20 6:46 UTC (permalink / raw) To: u-boot Hi Prafulla, Le 20/04/2012 08:10, Prafulla Wadaskar a ?crit : > Dear Albert > > Please kindly pull > The following changes since commit fb14b6b2f680363678b4e6a75eb9f3f0d79111fa: > Wolfgang Denk (1): > Prepare v2012.04-rc3 > > are available in the git repository at: > > u-boot-marvell.git master branch. > > David Purdy (1): > kirkwood: add support for Cloud Engines Pogoplug E02 > > Luka Perkov (1): > kirkwood: add NAS62x0 board support > > MAINTAINERS | 8 ++ > board/cloudengines/pogo_e02/Makefile | 43 ++++++++ > board/cloudengines/pogo_e02/kwbimage.cfg | 169 ++++++++++++++++++++++++++++++ > board/cloudengines/pogo_e02/pogo_e02.c | 118 +++++++++++++++++++++ > board/cloudengines/pogo_e02/pogo_e02.h | 44 ++++++++ > board/raidsonic/ib62x0/Makefile | 43 ++++++++ > board/raidsonic/ib62x0/ib62x0.c | 79 ++++++++++++++ > board/raidsonic/ib62x0/ib62x0.h | 40 +++++++ > board/raidsonic/ib62x0/kwbimage.cfg | 169 ++++++++++++++++++++++++++++++ > boards.cfg | 2 + > include/configs/ib62x0.h | 152 +++++++++++++++++++++++++++ > include/configs/pogo_e02.h | 119 +++++++++++++++++++++ > 12 files changed, 986 insertions(+), 0 deletions(-) > create mode 100644 board/cloudengines/pogo_e02/Makefile > create mode 100644 board/cloudengines/pogo_e02/kwbimage.cfg > create mode 100644 board/cloudengines/pogo_e02/pogo_e02.c > create mode 100644 board/cloudengines/pogo_e02/pogo_e02.h > create mode 100644 board/raidsonic/ib62x0/Makefile > create mode 100644 board/raidsonic/ib62x0/ib62x0.c > create mode 100644 board/raidsonic/ib62x0/ib62x0.h > create mode 100644 board/raidsonic/ib62x0/kwbimage.cfg > create mode 100644 include/configs/ib62x0.h > create mode 100644 include/configs/pogo_e02.h As we are on the verge of release: Applied to u-boot-arm/next, thanks. > Regards.. > Prafulla . . . Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-02-10 19:58 ` Albert ARIBAUD 2012-03-02 7:29 ` Prafulla Wadaskar 2012-04-20 6:10 ` Prafulla Wadaskar @ 2012-07-03 11:59 ` Prafulla Wadaskar 2012-07-05 8:40 ` Albert ARIBAUD 2012-07-03 12:00 ` Prafulla Wadaskar 3 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2012-07-03 11:59 UTC (permalink / raw) To: u-boot Dear Albert Please kindly pull The following changes since commit 3e0cac6b5158b22248f57cdf7769bf8d610fec5e: Rajeshwari Shinde (1): EXYNOS: SMDK5250: Enable the pinmux setup are available in the git repository at: u-boot-marvell.git ..BRANCH.NOT.VERIFIED.. Holger Brunck (7): arm/km: add board type to boards.cfg arm/km: add piggy mac adress offset for mgcoge3un arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE arm/km: use ARRAY_SIZE macro arm/km: fix wrong comment in SDRAM config for mgcoge3un arm/km: change maintainer for mgcoge3un arm/km: remove CONFIG_RESET_PHY_R Luka Perkov (1): kwboot: boot kirkwood SoCs over a serial link Michael Walle (4): lib: add rand() function net: use common rand()/srand() functions net: add helper to generate random mac address Kirkwood: add lschlv2 and lsxhl board support Simon Guinot (3): lacie_kw: fix SDRAM banks number for net2big_v2 lacie_kw: fix CONFIG_SYS_KWD_CONFIG for inetspace_v2 ARM: don't probe PHY address for LaCie boards Valentin Longchamp (9): arm/km: enable mii cmd km_arm: use filesize for erase in update command kirkwood: add save functionality kirkwood_mpp_conf function kirkwood: fix calls to kirkwood_mpp_conf kw_spi: backup and reset the MPP of the chosen CS pin kw_spi: support spi_claim/release_bus functions kw_spi: add weak functions board_spi_claim/release_bus arm/kirkwood: protect the ENV_SPI #defines arm/km: use spi claim bus to switch between SPI and NAND MAINTAINERS | 7 +- arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 10 +- arch/arm/include/asm/arch-kirkwood/config.h | 12 +- arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +- arch/arm/include/asm/arch-kirkwood/spi.h | 11 + board/LaCie/common/common.c | 23 +- board/LaCie/common/common.h | 2 +- board/LaCie/edminiv2/edminiv2.c | 2 +- board/LaCie/net2big_v2/net2big_v2.c | 4 +- board/LaCie/netspace_v2/netspace_v2.c | 4 +- board/Marvell/dreamplug/dreamplug.c | 2 +- board/Marvell/guruplug/guruplug.c | 2 +- board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +- board/Marvell/openrd/openrd.c | 2 +- board/Marvell/rd6281a/rd6281a.c | 2 +- board/Marvell/sheevaplug/sheevaplug.c | 2 +- board/Seagate/dockstar/dockstar.c | 2 +- board/buffalo/lsxl/Makefile | 44 ++ board/buffalo/lsxl/kwbimage-lschl.cfg | 229 +++++++ board/buffalo/lsxl/kwbimage-lsxhl.cfg | 229 +++++++ board/buffalo/lsxl/lsxl.c | 283 +++++++++ board/buffalo/lsxl/lsxl.h | 75 +++ board/cloudengines/pogo_e02/pogo_e02.c | 2 +- board/d-link/dns325/dns325.c | 2 +- board/keymile/km_arm/km_arm.c | 48 +-- board/keymile/km_arm/kwbimage-memphis.cfg | 2 +- board/raidsonic/ib62x0/ib62x0.c | 2 +- boards.cfg | 6 +- doc/kwboot.1 | 84 +++ drivers/spi/kirkwood_spi.c | 64 ++- include/common.h | 10 + include/configs/km/km_arm.h | 15 +- include/configs/km_kirkwood.h | 4 +- include/configs/lacie_kw.h | 6 +- include/configs/lsxl.h | 182 ++++++ include/configs/mgcoge3un.h | 1 + include/net.h | 17 + lib/Makefile | 5 +- lib/rand.c | 48 ++ net/Makefile | 2 - net/eth.c | 22 + net/link_local.c | 7 +- net/net_rand.c | 68 -- net/net_rand.h | 31 +- tools/Makefile | 6 + tools/kwboot.c | 742 +++++++++++++++++++++++ 46 files changed, 2143 insertions(+), 184 deletions(-) create mode 100644 board/buffalo/lsxl/Makefile create mode 100644 board/buffalo/lsxl/kwbimage-lschl.cfg create mode 100644 board/buffalo/lsxl/kwbimage-lsxhl.cfg create mode 100644 board/buffalo/lsxl/lsxl.c create mode 100644 board/buffalo/lsxl/lsxl.h create mode 100644 doc/kwboot.1 create mode 100644 include/configs/lsxl.h create mode 100644 lib/rand.c delete mode 100644 net/net_rand.c create mode 100644 tools/kwboot.c Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-07-03 11:59 ` Prafulla Wadaskar @ 2012-07-05 8:40 ` Albert ARIBAUD 2012-07-05 9:37 ` [U-Boot] Pull request for u-boot-marvell.git - PLEASE HOLD ON Albert ARIBAUD 0 siblings, 1 reply; 65+ messages in thread From: Albert ARIBAUD @ 2012-07-05 8:40 UTC (permalink / raw) To: u-boot Hi Prafulla, On Tue, 3 Jul 2012 04:59:21 -0700, Prafulla Wadaskar <prafulla@marvell.com> wrote: > Dear Albert > > Please kindly pull > The following changes since commit > 3e0cac6b5158b22248f57cdf7769bf8d610fec5e: Rajeshwari Shinde (1): > EXYNOS: SMDK5250: Enable the pinmux setup > > are available in the git repository at: > > u-boot-marvell.git ..BRANCH.NOT.VERIFIED.. Seems the branch was not pushed at time of pull request... And then current marvell master has one more commit than what's listed below. Can you re-issue a (rebased and) updated pull request? Thanks in advance. > Holger Brunck (7): > arm/km: add board type to boards.cfg > arm/km: add piggy mac adress offset for mgcoge3un > arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE > arm/km: use ARRAY_SIZE macro > arm/km: fix wrong comment in SDRAM config for mgcoge3un > arm/km: change maintainer for mgcoge3un > arm/km: remove CONFIG_RESET_PHY_R > > Luka Perkov (1): > kwboot: boot kirkwood SoCs over a serial link > > Michael Walle (4): > lib: add rand() function > net: use common rand()/srand() functions > net: add helper to generate random mac address > Kirkwood: add lschlv2 and lsxhl board support > > Simon Guinot (3): > lacie_kw: fix SDRAM banks number for net2big_v2 > lacie_kw: fix CONFIG_SYS_KWD_CONFIG for inetspace_v2 > ARM: don't probe PHY address for LaCie boards > > Valentin Longchamp (9): > arm/km: enable mii cmd > km_arm: use filesize for erase in update command > kirkwood: add save functionality kirkwood_mpp_conf function > kirkwood: fix calls to kirkwood_mpp_conf > kw_spi: backup and reset the MPP of the chosen CS pin > kw_spi: support spi_claim/release_bus functions > kw_spi: add weak functions board_spi_claim/release_bus > arm/kirkwood: protect the ENV_SPI #defines > arm/km: use spi claim bus to switch between SPI and NAND > > MAINTAINERS | 7 +- > arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 10 +- > arch/arm/include/asm/arch-kirkwood/config.h | 12 +- > arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +- > arch/arm/include/asm/arch-kirkwood/spi.h | 11 + > board/LaCie/common/common.c | 23 +- > board/LaCie/common/common.h | 2 +- > board/LaCie/edminiv2/edminiv2.c | 2 +- > board/LaCie/net2big_v2/net2big_v2.c | 4 +- > board/LaCie/netspace_v2/netspace_v2.c | 4 +- > board/Marvell/dreamplug/dreamplug.c | 2 +- > board/Marvell/guruplug/guruplug.c | 2 +- > board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +- > board/Marvell/openrd/openrd.c | 2 +- > board/Marvell/rd6281a/rd6281a.c | 2 +- > board/Marvell/sheevaplug/sheevaplug.c | 2 +- > board/Seagate/dockstar/dockstar.c | 2 +- > board/buffalo/lsxl/Makefile | 44 ++ > board/buffalo/lsxl/kwbimage-lschl.cfg | 229 +++++++ > board/buffalo/lsxl/kwbimage-lsxhl.cfg | 229 +++++++ > board/buffalo/lsxl/lsxl.c | 283 +++++++++ > board/buffalo/lsxl/lsxl.h | 75 +++ > board/cloudengines/pogo_e02/pogo_e02.c | 2 +- > board/d-link/dns325/dns325.c | 2 +- > board/keymile/km_arm/km_arm.c | 48 +-- > board/keymile/km_arm/kwbimage-memphis.cfg | 2 +- > board/raidsonic/ib62x0/ib62x0.c | 2 +- > boards.cfg | 6 +- > doc/kwboot.1 | 84 +++ > drivers/spi/kirkwood_spi.c | 64 ++- > include/common.h | 10 + > include/configs/km/km_arm.h | 15 +- > include/configs/km_kirkwood.h | 4 +- > include/configs/lacie_kw.h | 6 +- > include/configs/lsxl.h | 182 ++++++ > include/configs/mgcoge3un.h | 1 + > include/net.h | 17 + > lib/Makefile | 5 +- > lib/rand.c | 48 ++ > net/Makefile | 2 - > net/eth.c | 22 + > net/link_local.c | 7 +- > net/net_rand.c | 68 -- > net/net_rand.h | 31 +- > tools/Makefile | 6 + > tools/kwboot.c | 742 > +++++++++++++++++++++++ 46 files changed, 2143 insertions(+), 184 > deletions(-) create mode 100644 board/buffalo/lsxl/Makefile > create mode 100644 board/buffalo/lsxl/kwbimage-lschl.cfg > create mode 100644 board/buffalo/lsxl/kwbimage-lsxhl.cfg > create mode 100644 board/buffalo/lsxl/lsxl.c > create mode 100644 board/buffalo/lsxl/lsxl.h > create mode 100644 doc/kwboot.1 > create mode 100644 include/configs/lsxl.h > create mode 100644 lib/rand.c > delete mode 100644 net/net_rand.c > create mode 100644 tools/kwboot.c > > Regards... > Prafulla . . . > Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git - PLEASE HOLD ON 2012-07-05 8:40 ` Albert ARIBAUD @ 2012-07-05 9:37 ` Albert ARIBAUD 2012-07-05 9:44 ` [U-Boot] Pull request for u-boot-marvell.git - go ahead Albert ARIBAUD 0 siblings, 1 reply; 65+ messages in thread From: Albert ARIBAUD @ 2012-07-05 9:37 UTC (permalink / raw) To: u-boot Hi Albert, On Thu, 5 Jul 2012 10:40:47 +0200, Albert ARIBAUD <albert.u.boot@aribaud.net> wrote: > Hi Prafulla, > > On Tue, 3 Jul 2012 04:59:21 -0700, Prafulla Wadaskar > <prafulla@marvell.com> wrote: > > Dear Albert > > > > Please kindly pull > > The following changes since commit > > 3e0cac6b5158b22248f57cdf7769bf8d610fec5e: Rajeshwari Shinde (1): > > EXYNOS: SMDK5250: Enable the pinmux setup > > > > are available in the git repository at: > > > > u-boot-marvell.git ..BRANCH.NOT.VERIFIED.. > > Seems the branch was not pushed at time of pull request... And then > current marvell master has one more commit than what's listed below. > Can you re-issue a (rebased and) updated pull request? Thanks in > advance. Please hold on: I had a misconfigured e-mail in my new git setup, so my current u-boot-arm tree is not ueasble. I'll send out a notice when the tree is fixed. Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git - go ahead 2012-07-05 9:37 ` [U-Boot] Pull request for u-boot-marvell.git - PLEASE HOLD ON Albert ARIBAUD @ 2012-07-05 9:44 ` Albert ARIBAUD 2012-07-05 11:29 ` [U-Boot] Pull request for u-boot-marvell.git Prafulla Wadaskar ` (6 more replies) 0 siblings, 7 replies; 65+ messages in thread From: Albert ARIBAUD @ 2012-07-05 9:44 UTC (permalink / raw) To: u-boot Hi Albert, On Thu, 5 Jul 2012 11:37:25 +0200, Albert ARIBAUD <albert.u.boot@aribaud.net> wrote: > Hi Albert, > > On Thu, 5 Jul 2012 10:40:47 +0200, Albert ARIBAUD > <albert.u.boot@aribaud.net> wrote: > > Hi Prafulla, > > > > On Tue, 3 Jul 2012 04:59:21 -0700, Prafulla Wadaskar > > <prafulla@marvell.com> wrote: > > > Dear Albert > > > > > > Please kindly pull > > > The following changes since commit > > > 3e0cac6b5158b22248f57cdf7769bf8d610fec5e: Rajeshwari Shinde (1): > > > EXYNOS: SMDK5250: Enable the pinmux setup > > > > > > are available in the git repository at: > > > > > > u-boot-marvell.git ..BRANCH.NOT.VERIFIED.. > > > > Seems the branch was not pushed at time of pull request... And then > > current marvell master has one more commit than what's listed below. > > Can you re-issue a (rebased and) updated pull request? Thanks in > > advance. > > Please hold on: I had a misconfigured e-mail in my new git setup, so > my current u-boot-arm tree is not ueasble. I'll send out a notice when > the tree is fixed. Luckily, I had not pushed any change with the wrong e-mail address on the official ARM tree, so all is fine. Please proceed with fixing and rebasing. Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-07-05 9:44 ` [U-Boot] Pull request for u-boot-marvell.git - go ahead Albert ARIBAUD @ 2012-07-05 11:29 ` Prafulla Wadaskar 2012-07-05 11:50 ` Albert ARIBAUD 2012-07-05 17:38 ` Prafulla Wadaskar ` (5 subsequent siblings) 6 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2012-07-05 11:29 UTC (permalink / raw) To: u-boot Dear Albert, Please pull The following changes since commit c45272e25bdf241fbb27638465f16ce2342ed1b6: Michael Langer (1): i.MX6 USDHC: Use the ESDHC clock are available in the git repository at: u-boot-marvell.git master branch. Holger Brunck (7): arm/km: add board type to boards.cfg arm/km: add piggy mac adress offset for mgcoge3un arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE arm/km: use ARRAY_SIZE macro arm/km: fix wrong comment in SDRAM config for mgcoge3un arm/km: change maintainer for mgcoge3un arm/km: remove CONFIG_RESET_PHY_R Luka Perkov (1): kwboot: boot kirkwood SoCs over a serial link Marek Vasut (1): Kirkwood: Add support for Ka-Ro TK71 Michael Walle (4): lib: add rand() function net: use common rand()/srand() functions net: add helper to generate random mac address Kirkwood: add lschlv2 and lsxhl board support Simon Guinot (3): lacie_kw: fix SDRAM banks number for net2big_v2 lacie_kw: fix CONFIG_SYS_KWD_CONFIG for inetspace_v2 ARM: don't probe PHY address for LaCie boards Valentin Longchamp (9): arm/km: enable mii cmd km_arm: use filesize for erase in update command kirkwood: add save functionality kirkwood_mpp_conf function kirkwood: fix calls to kirkwood_mpp_conf kw_spi: backup and reset the MPP of the chosen CS pin kw_spi: support spi_claim/release_bus functions kw_spi: add weak functions board_spi_claim/release_bus arm/kirkwood: protect the ENV_SPI #defines arm/km: use spi claim bus to switch between SPI and NAND MAINTAINERS | 7 +- arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 10 +- arch/arm/include/asm/arch-kirkwood/config.h | 12 +- arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +- arch/arm/include/asm/arch-kirkwood/spi.h | 11 + board/LaCie/common/common.c | 23 +- board/LaCie/common/common.h | 2 +- board/LaCie/edminiv2/edminiv2.c | 2 +- board/LaCie/net2big_v2/net2big_v2.c | 4 +- board/LaCie/netspace_v2/netspace_v2.c | 4 +- board/Marvell/dreamplug/dreamplug.c | 2 +- board/Marvell/guruplug/guruplug.c | 2 +- board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +- board/Marvell/openrd/openrd.c | 2 +- board/Marvell/rd6281a/rd6281a.c | 2 +- board/Marvell/sheevaplug/sheevaplug.c | 2 +- board/Seagate/dockstar/dockstar.c | 2 +- board/buffalo/lsxl/Makefile | 44 ++ board/buffalo/lsxl/kwbimage-lschl.cfg | 229 +++++++ board/buffalo/lsxl/kwbimage-lsxhl.cfg | 229 +++++++ board/buffalo/lsxl/lsxl.c | 283 +++++++++ board/buffalo/lsxl/lsxl.h | 75 +++ board/cloudengines/pogo_e02/pogo_e02.c | 2 +- board/d-link/dns325/dns325.c | 2 +- board/karo/tk71/Makefile | 45 ++ board/karo/tk71/kwbimage.cfg | 174 ++++++ board/karo/tk71/tk71.c | 166 +++++ board/keymile/km_arm/km_arm.c | 48 +-- board/keymile/km_arm/kwbimage-memphis.cfg | 2 +- board/raidsonic/ib62x0/ib62x0.c | 2 +- boards.cfg | 7 +- doc/kwboot.1 | 84 +++ drivers/spi/kirkwood_spi.c | 64 ++- include/common.h | 10 + include/configs/km/km_arm.h | 15 +- include/configs/km_kirkwood.h | 4 +- include/configs/lacie_kw.h | 6 +- include/configs/lsxl.h | 182 ++++++ include/configs/mgcoge3un.h | 1 + include/configs/tk71.h | 130 ++++ include/net.h | 17 + lib/Makefile | 5 +- lib/rand.c | 48 ++ net/Makefile | 2 - net/eth.c | 22 + net/link_local.c | 7 +- net/net_rand.c | 68 -- net/net_rand.h | 31 +- tools/Makefile | 6 + tools/kwboot.c | 742 +++++++++++++++++++++++ 50 files changed, 2659 insertions(+), 184 deletions(-) create mode 100644 board/buffalo/lsxl/Makefile create mode 100644 board/buffalo/lsxl/kwbimage-lschl.cfg create mode 100644 board/buffalo/lsxl/kwbimage-lsxhl.cfg create mode 100644 board/buffalo/lsxl/lsxl.c create mode 100644 board/buffalo/lsxl/lsxl.h create mode 100644 board/karo/tk71/Makefile create mode 100644 board/karo/tk71/kwbimage.cfg create mode 100644 board/karo/tk71/tk71.c create mode 100644 doc/kwboot.1 create mode 100644 include/configs/lsxl.h create mode 100644 include/configs/tk71.h create mode 100644 lib/rand.c delete mode 100644 net/net_rand.c create mode 100644 tools/kwboot.c Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-07-05 11:29 ` [U-Boot] Pull request for u-boot-marvell.git Prafulla Wadaskar @ 2012-07-05 11:50 ` Albert ARIBAUD 0 siblings, 0 replies; 65+ messages in thread From: Albert ARIBAUD @ 2012-07-05 11:50 UTC (permalink / raw) To: u-boot Hi Prafulla, On Thu, 5 Jul 2012 04:29:31 -0700, Prafulla Wadaskar <prafulla@marvell.com> wrote: > Dear Albert, > > Please pull > The following changes since commit > c45272e25bdf241fbb27638465f16ce2342ed1b6: Michael Langer (1): > i.MX6 USDHC: Use the ESDHC clock > > are available in the git repository at: > > u-boot-marvell.git master branch. Applied to u-boot-arm/master, thanks. Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-07-05 9:44 ` [U-Boot] Pull request for u-boot-marvell.git - go ahead Albert ARIBAUD 2012-07-05 11:29 ` [U-Boot] Pull request for u-boot-marvell.git Prafulla Wadaskar @ 2012-07-05 17:38 ` Prafulla Wadaskar 2012-07-06 21:30 ` Albert ARIBAUD 2012-09-03 9:20 ` Prafulla Wadaskar ` (4 subsequent siblings) 6 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2012-07-05 17:38 UTC (permalink / raw) To: u-boot Dear Albert, Please pull The following changes since commit 863ba81c70d8ca8dc49e0c5a28a1fd0fb23ca62d: Tetsuyuki Kobayashi (1): arm: bugfix: Move vector table before jumping relocated code are available in the git repository at: u-boot-marvell.git master branch. Holger Brunck (6): arm/km: add kmnusa board support arm/km: add kmcoge5un board support arm/km: convert mgcoge3un target to km_kirkwood arm/km: remove portl2.h and use km_kirkwood instead arm/km: cleanup km_kirkwood boards arm/km: remove calls to kw_gpio_* in board_early_init_f Thomas Herzmann (1): arm/km: add implementation for read_dip_switch Valentin Longchamp (4): arm/km: enable BOCO2 FPGA download support arm/km: redefine piggy 4 reg names to avoid conflicts arm/km: skip FPGA config when already configured arm/km: support the 2 PCIe fpga resets MAINTAINERS | 2 + board/keymile/common/common.h | 5 + board/keymile/km_arm/Makefile | 4 + board/keymile/km_arm/fpga_config.c | 256 ++++++++++++++++++++++++ board/keymile/km_arm/km_arm.c | 104 +++++++--- board/keymile/km_arm/kwbimage_128M16_1.cfg | 294 +++++++++++++++++++++++++++ board/keymile/km_arm/kwbimage_256M8_1.cfg | 296 ++++++++++++++++++++++++++++ boards.cfg | 10 +- include/configs/km/km_arm.h | 48 ++++- include/configs/km_kirkwood.h | 141 ++++++++++++-- include/configs/mgcoge3un.h | 87 -------- include/configs/portl2.h | 85 -------- 12 files changed, 1101 insertions(+), 231 deletions(-) create mode 100644 board/keymile/km_arm/fpga_config.c create mode 100644 board/keymile/km_arm/kwbimage_128M16_1.cfg create mode 100644 board/keymile/km_arm/kwbimage_256M8_1.cfg delete mode 100644 include/configs/mgcoge3un.h delete mode 100644 include/configs/portl2.h Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-07-05 17:38 ` Prafulla Wadaskar @ 2012-07-06 21:30 ` Albert ARIBAUD 0 siblings, 0 replies; 65+ messages in thread From: Albert ARIBAUD @ 2012-07-06 21:30 UTC (permalink / raw) To: u-boot Hi Prafulla, On Thu, 5 Jul 2012 10:38:32 -0700, Prafulla Wadaskar <prafulla@marvell.com> wrote: > Dear Albert, > > Please pull > The following changes since commit 863ba81c70d8ca8dc49e0c5a28a1fd0fb23ca62d: > Tetsuyuki Kobayashi (1): > arm: bugfix: Move vector table before jumping relocated code > > are available in the git repository at: > > u-boot-marvell.git master branch. > > Holger Brunck (6): > arm/km: add kmnusa board support > arm/km: add kmcoge5un board support > arm/km: convert mgcoge3un target to km_kirkwood > arm/km: remove portl2.h and use km_kirkwood instead > arm/km: cleanup km_kirkwood boards > arm/km: remove calls to kw_gpio_* in board_early_init_f > > Thomas Herzmann (1): > arm/km: add implementation for read_dip_switch > > Valentin Longchamp (4): > arm/km: enable BOCO2 FPGA download support > arm/km: redefine piggy 4 reg names to avoid conflicts > arm/km: skip FPGA config when already configured > arm/km: support the 2 PCIe fpga resets > > MAINTAINERS | 2 + > board/keymile/common/common.h | 5 + > board/keymile/km_arm/Makefile | 4 + > board/keymile/km_arm/fpga_config.c | 256 ++++++++++++++++++++++++ > board/keymile/km_arm/km_arm.c | 104 +++++++--- > board/keymile/km_arm/kwbimage_128M16_1.cfg | 294 +++++++++++++++++++++++++++ > board/keymile/km_arm/kwbimage_256M8_1.cfg | 296 ++++++++++++++++++++++++++++ > boards.cfg | 10 +- > include/configs/km/km_arm.h | 48 ++++- > include/configs/km_kirkwood.h | 141 ++++++++++++-- > include/configs/mgcoge3un.h | 87 -------- > include/configs/portl2.h | 85 -------- > 12 files changed, 1101 insertions(+), 231 deletions(-) > create mode 100644 board/keymile/km_arm/fpga_config.c > create mode 100644 board/keymile/km_arm/kwbimage_128M16_1.cfg > create mode 100644 board/keymile/km_arm/kwbimage_256M8_1.cfg > delete mode 100644 include/configs/mgcoge3un.h > delete mode 100644 include/configs/portl2.h Applied to u-boot-arm/master, thanks. > Regards... > Prafulla . . . Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-07-05 9:44 ` [U-Boot] Pull request for u-boot-marvell.git - go ahead Albert ARIBAUD 2012-07-05 11:29 ` [U-Boot] Pull request for u-boot-marvell.git Prafulla Wadaskar 2012-07-05 17:38 ` Prafulla Wadaskar @ 2012-09-03 9:20 ` Prafulla Wadaskar 2012-09-03 18:59 ` Albert ARIBAUD 2012-09-05 19:56 ` Simon Guinot 2012-10-03 9:01 ` [U-Boot] Pull request for u-boot-marvell.git Prafulla Wadaskar ` (3 subsequent siblings) 6 siblings, 2 replies; 65+ messages in thread From: Prafulla Wadaskar @ 2012-09-03 9:20 UTC (permalink / raw) To: u-boot Dear Albert, Please pull The following changes since commit 6e2fbdea1b26d75314d87c380a36b0015bf824cf: Wolfgang Denk (1): Merge branch 'agust at denx.de' of git://git.denx.de/u-boot-staging are available in the git repository at: u-boot-marvell.git master branch. Albert ARIBAUD (1): edminiv2: orion5x: fix GPIO inits and values Holger Brunck (1): arm/km: remove unused code Karl O. Pinc (2): Cosmetic doc typo fixes to the kwbimage feature docs cosmetic: Better explain how to use the kirkwood kwbimage.cfg file. Michael Walle (1): lsxl: support power switch Valentin Longchamp (4): km/arm: set SPI NOR Flash default parameters kw_spi: fix clock prescaler computation km/ivm: fix string len check to support 7 char board names arm/km: fix frequency of the SPI NOR Flash arch/arm/cpu/arm926ejs/orion5x/cpu.c | 2 ++ arch/arm/include/asm/arch-kirkwood/spi.h | 1 + board/Marvell/sheevaplug/kwbimage.cfg | 4 ++-- board/buffalo/lsxl/lsxl.c | 22 +++++++++++++++++++++- board/keymile/common/ivm.c | 2 +- board/keymile/km_arm/km_arm.c | 20 -------------------- doc/README.kwbimage | 19 +++++++++++++++---- drivers/spi/kirkwood_spi.c | 5 +++-- include/configs/edminiv2.h | 13 +++++++++---- include/configs/km/keymile-common.h | 1 - include/configs/km/km_arm.h | 6 +++++- 11 files changed, 59 insertions(+), 36 deletions(-) Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-09-03 9:20 ` Prafulla Wadaskar @ 2012-09-03 18:59 ` Albert ARIBAUD 2012-09-05 19:56 ` Simon Guinot 1 sibling, 0 replies; 65+ messages in thread From: Albert ARIBAUD @ 2012-09-03 18:59 UTC (permalink / raw) To: u-boot Hi Prafulla, On Mon, 3 Sep 2012 02:20:19 -0700, Prafulla Wadaskar <prafulla@marvell.com> wrote: > Dear Albert, > > Please pull > The following changes since commit > 6e2fbdea1b26d75314d87c380a36b0015bf824cf: Wolfgang Denk (1): > Merge branch 'agust at denx.de' of > git://git.denx.de/u-boot-staging > > are available in the git repository at: > > u-boot-marvell.git master branch. > > Albert ARIBAUD (1): > edminiv2: orion5x: fix GPIO inits and values > > Holger Brunck (1): > arm/km: remove unused code > > Karl O. Pinc (2): > Cosmetic doc typo fixes to the kwbimage feature docs > cosmetic: Better explain how to use the kirkwood kwbimage.cfg > file. > > Michael Walle (1): > lsxl: support power switch > > Valentin Longchamp (4): > km/arm: set SPI NOR Flash default parameters > kw_spi: fix clock prescaler computation > km/ivm: fix string len check to support 7 char board names > arm/km: fix frequency of the SPI NOR Flash > > arch/arm/cpu/arm926ejs/orion5x/cpu.c | 2 ++ > arch/arm/include/asm/arch-kirkwood/spi.h | 1 + > board/Marvell/sheevaplug/kwbimage.cfg | 4 ++-- > board/buffalo/lsxl/lsxl.c | 22 > +++++++++++++++++++++- board/keymile/common/ivm.c | > 2 +- board/keymile/km_arm/km_arm.c | 20 > -------------------- doc/README.kwbimage | 19 > +++++++++++++++---- drivers/spi/kirkwood_spi.c | 5 > +++-- include/configs/edminiv2.h | 13 +++++++++---- > include/configs/km/keymile-common.h | 1 - > include/configs/km/km_arm.h | 6 +++++- > 11 files changed, 59 insertions(+), 36 deletions(-) > > Regards... > Prafulla . . . > Applied to u-boot-arm/master, thanks! Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-09-03 9:20 ` Prafulla Wadaskar 2012-09-03 18:59 ` Albert ARIBAUD @ 2012-09-05 19:56 ` Simon Guinot 2012-09-06 1:21 ` Prafulla Wadaskar 1 sibling, 1 reply; 65+ messages in thread From: Simon Guinot @ 2012-09-05 19:56 UTC (permalink / raw) To: u-boot On Mon, Sep 03, 2012 at 02:20:19AM -0700, Prafulla Wadaskar wrote: > Dear Albert, > > Please pull > The following changes since commit 6e2fbdea1b26d75314d87c380a36b0015bf824cf: > Wolfgang Denk (1): > Merge branch 'agust at denx.de' of git://git.denx.de/u-boot-staging Hi Prafulla, Do you have some news about the board patches I sent you in early June ? Here are the patchwork urls: http://patchwork.ozlabs.org/patch/163192/ http://patchwork.ozlabs.org/patch/163193/ http://patchwork.ozlabs.org/patch/163195/ http://patchwork.ozlabs.org/patch/163194/ Thanks in advance. Simon -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 198 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120905/c8745ccb/attachment.pgp> ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-09-05 19:56 ` Simon Guinot @ 2012-09-06 1:21 ` Prafulla Wadaskar 2012-09-06 8:22 ` Albert ARIBAUD 0 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2012-09-06 1:21 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: Simon Guinot [mailto:simon.guinot at sequanux.org] > Sent: 05 September 2012 12:57 > To: Prafulla Wadaskar > Cc: Albert ARIBAUD; 'u-boot at lists.denx.de'; 'Wolfgang at theia.denx.de; > Ashish Karkare; Prabhanjan Sarnaik > Subject: Re: [U-Boot] Pull request for u-boot-marvell.git > > On Mon, Sep 03, 2012 at 02:20:19AM -0700, Prafulla Wadaskar wrote: > > Dear Albert, > > > > Please pull > > The following changes since commit > 6e2fbdea1b26d75314d87c380a36b0015bf824cf: > > Wolfgang Denk (1): > > Merge branch 'agust at denx.de' of git://git.denx.de/u-boot- > staging > > Hi Prafulla, > > Do you have some news about the board patches I sent you in early June > ? > > Here are the patchwork urls: > http://patchwork.ozlabs.org/patch/163192/ This looks Okay > http://patchwork.ozlabs.org/patch/163193/ This change should go differently, ARM Maintainer should pull mach_types, we cannot modify this file locally. > http://patchwork.ozlabs.org/patch/163195/ > http://patchwork.ozlabs.org/patch/163194/ > > Thanks in advance. Hi Simon Thanks for pointing this out, I will pull them, but I doubt they will be applicable on latest u-boot, may you please confirm? Or it would be good if you can repost new patch series. Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-09-06 1:21 ` Prafulla Wadaskar @ 2012-09-06 8:22 ` Albert ARIBAUD 2012-09-06 9:25 ` [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices Simon Guinot 0 siblings, 1 reply; 65+ messages in thread From: Albert ARIBAUD @ 2012-09-06 8:22 UTC (permalink / raw) To: u-boot Hi Prafulla, Simon, On Wed, 5 Sep 2012 18:21:47 -0700, Prafulla Wadaskar <prafulla@marvell.com> wrote: > > > > -----Original Message----- > > From: Simon Guinot [mailto:simon.guinot at sequanux.org] > > Sent: 05 September 2012 12:57 > > To: Prafulla Wadaskar > > Cc: Albert ARIBAUD; 'u-boot at lists.denx.de'; 'Wolfgang at theia.denx.de; > > Ashish Karkare; Prabhanjan Sarnaik > > Subject: Re: [U-Boot] Pull request for u-boot-marvell.git > > > > On Mon, Sep 03, 2012 at 02:20:19AM -0700, Prafulla Wadaskar wrote: > > > Dear Albert, > > > > > > Please pull > > > The following changes since commit > > 6e2fbdea1b26d75314d87c380a36b0015bf824cf: > > > Wolfgang Denk (1): > > > Merge branch 'agust at denx.de' of git://git.denx.de/u-boot- > > staging > > > > Hi Prafulla, > > > > Do you have some news about the board patches I sent you in early > > June ? > > > > Here are the patchwork urls: > > http://patchwork.ozlabs.org/patch/163192/ > > This looks Okay > > > http://patchwork.ozlabs.org/patch/163193/ > > This change should go differently, ARM Maintainer should pull > mach_types, we cannot modify this file locally. I will do the Linux machine type pulling (including clean up of any board configs if their locally defined machine type is now part of the Linux list) and warn board maintainers about dropped machine types if any. > > http://patchwork.ozlabs.org/patch/163195/ > > > http://patchwork.ozlabs.org/patch/163194/ > > > > Thanks in advance. > > Hi Simon > Thanks for pointing this out, > I will pull them, but I doubt they will be applicable on latest > u-boot, may you please confirm? > > Or it would be good if you can repost new patch series. ... rebased on u-boot-arm/master. > Regards... > Prafulla . . . Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices 2012-09-06 8:22 ` Albert ARIBAUD @ 2012-09-06 9:25 ` Simon Guinot 2012-09-06 9:25 ` [U-Boot] [PATCH v3 1/4] lacie_kw: add support for EFI partitions Simon Guinot ` (4 more replies) 0 siblings, 5 replies; 65+ messages in thread From: Simon Guinot @ 2012-09-06 9:25 UTC (permalink / raw) To: u-boot Changes for v3: - Rebased against u-boot-mv/master and u-boot-arm/master. Changes for v2: - Move board support and feature into a separate patch set. - Move mach-types update into a separate patch. Simon Guinot (4): lacie_kw: add support for EFI partitions ARM: add netspace_mini_v2 to mach-types.h ARM: add support for Network Space v2 Lite and Mini ARM: add support for d2 Network v2 arch/arm/include/asm/mach-types.h | 13 +++ board/LaCie/common/common.c | 36 ++++++- board/LaCie/common/common.h | 1 + board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 +++++++++++++++++++++++++++++ board/LaCie/netspace_v2/netspace_v2.c | 4 + boards.cfg | 3 + include/configs/lacie_kw.h | 42 ++++++-- 7 files changed, 252 insertions(+), 9 deletions(-) create mode 100644 board/LaCie/netspace_v2/kwbimage-ns2l.cfg -- 1.7.10 ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v3 1/4] lacie_kw: add support for EFI partitions 2012-09-06 9:25 ` [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices Simon Guinot @ 2012-09-06 9:25 ` Simon Guinot 2012-09-06 9:25 ` [U-Boot] [PATCH v3 2/4] ARM: add netspace_mini_v2 to mach-types.h Simon Guinot ` (3 subsequent siblings) 4 siblings, 0 replies; 65+ messages in thread From: Simon Guinot @ 2012-09-06 9:25 UTC (permalink / raw) To: u-boot Defines CONFIG_EFI_PARTITION for LaCie boards. Additionally this patch defines CONFIG_DOS_PARTITION. Note that this definition is implicit in mv_common.h when CONFIG_CMD_USB is enabled. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> --- No changes for v2 and v3. include/configs/lacie_kw.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index c35c2db..08aec04 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -130,6 +130,12 @@ #endif /* CONFIG_CMD_I2C */ /* + * Partition support + */ +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION + +/* * File systems support */ #define CONFIG_CMD_EXT2 -- 1.7.10 ^ permalink raw reply related [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v3 2/4] ARM: add netspace_mini_v2 to mach-types.h 2012-09-06 9:25 ` [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices Simon Guinot 2012-09-06 9:25 ` [U-Boot] [PATCH v3 1/4] lacie_kw: add support for EFI partitions Simon Guinot @ 2012-09-06 9:25 ` Simon Guinot 2012-09-06 9:25 ` [U-Boot] [PATCH v3 3/4] ARM: add support for Network Space v2 Lite and Mini Simon Guinot ` (2 subsequent siblings) 4 siblings, 0 replies; 65+ messages in thread From: Simon Guinot @ 2012-09-06 9:25 UTC (permalink / raw) To: u-boot This patch adds the Network Space Mini v2 machine to mach-types.h. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> --- No changes for v3. arch/arm/include/asm/mach-types.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h index 2d5c3bc..36c108d 100644 --- a/arch/arm/include/asm/mach-types.h +++ b/arch/arm/include/asm/mach-types.h @@ -471,6 +471,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_EUKREA_CPUIMX35SD 2821 #define MACH_TYPE_EUKREA_CPUIMX51SD 2822 #define MACH_TYPE_EUKREA_CPUIMX51 2823 +#define MACH_TYPE_NETSPACE_MINI_V2 2831 #define MACH_TYPE_SMDKC210 2838 #define MACH_TYPE_OMAP3_BRAILLO 2839 #define MACH_TYPE_SPYPLUG 2840 @@ -6614,6 +6615,18 @@ extern unsigned int __machine_arch_type; # define machine_is_eukrea_cpuimx51() (0) #endif +#ifdef CONFIG_MACH_NETSPACE_MINI_V2 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NETSPACE_MINI_V2 +# endif +# define machine_is_netspace_mini_v2() (machine_arch_type == MACH_TYPE_NETSPACE_MINI_V2) +#else +# define machine_is_netspace_mini_v2() (0) +#endif + #ifdef CONFIG_MACH_SMDKC210 # ifdef machine_arch_type # undef machine_arch_type -- 1.7.10 ^ permalink raw reply related [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v3 3/4] ARM: add support for Network Space v2 Lite and Mini 2012-09-06 9:25 ` [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices Simon Guinot 2012-09-06 9:25 ` [U-Boot] [PATCH v3 1/4] lacie_kw: add support for EFI partitions Simon Guinot 2012-09-06 9:25 ` [U-Boot] [PATCH v3 2/4] ARM: add netspace_mini_v2 to mach-types.h Simon Guinot @ 2012-09-06 9:25 ` Simon Guinot 2012-09-06 9:25 ` [U-Boot] [PATCH v3 4/4] ARM: add support for d2 Network v2 Simon Guinot 2012-09-06 11:27 ` [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices Simon Guinot 4 siblings, 0 replies; 65+ messages in thread From: Simon Guinot @ 2012-09-06 9:25 UTC (permalink / raw) To: u-boot This patch adds support for the LaCie boards Network Space v2 (Lite and Mini). This two boards are derived from the Network Space v2 and a lot of hardware caracteristics are shared. - CPU: Marvell 88F6192 800Mhz - SDRAM memory: 128MB DDR2 200Mhz - 1 SATA port: internal - Gigabit ethernet: PHY Marvell 88E1318 - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports (Lite only): host and host/device - 1 push button - 1 SATA LED (bi-color, blue and red) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> --- No changes for v3. Changes for v2: - Move mach-types update into a separate patch. board/LaCie/common/common.c | 36 ++++++- board/LaCie/common/common.h | 1 + board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 +++++++++++++++++++++++++++++ board/LaCie/netspace_v2/netspace_v2.c | 4 + boards.cfg | 2 + include/configs/lacie_kw.h | 26 ++++- 6 files changed, 224 insertions(+), 7 deletions(-) create mode 100644 board/LaCie/netspace_v2/kwbimage-ns2l.cfg diff --git a/board/LaCie/common/common.c b/board/LaCie/common/common.c index 78d0edc..a62bf9f 100644 --- a/board/LaCie/common/common.c +++ b/board/LaCie/common/common.c @@ -13,10 +13,11 @@ #if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) +#define MII_MARVELL_PHY_PAGE 22 + #define MV88E1116_LED_FCTRL_REG 10 #define MV88E1116_CPRSP_CR3_REG 21 #define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) @@ -31,15 +32,44 @@ void mv_phy_88e1116_init(const char *name, u16 phyaddr) * Enable RGMII delay on Tx and Rx for CPU port * Ref: sec 4.7.2 of chip datasheet */ - miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 2); + miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 2); miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, ®); reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg); - miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 0); + miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 0); if (miiphy_reset(name, phyaddr) == 0) printf("88E1116 Initialized on %s\n", name); } + +void mv_phy_88e1318_init(const char *name, u16 phyaddr) +{ + u16 reg; + + if (miiphy_set_current_dev(name)) + return; + + /* + * Set control mode 4 for LED[0]. + */ + miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 3); + miiphy_read(name, phyaddr, 16, ®); + reg |= 0xf; + miiphy_write(name, phyaddr, 16, reg); + + /* + * Enable RGMII delay on Tx and Rx for CPU port + * Ref: sec 4.7.2 of chip datasheet + */ + miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 2); + miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, ®); + reg |= (MV88E1116_RGMII_TXTM_CTRL | MV88E1116_RGMII_RXTM_CTRL); + miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg); + miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 0); + + if (miiphy_reset(name, phyaddr) == 0) + printf("88E1318 Initialized on %s\n", name); +} #endif /* CONFIG_CMD_NET && CONFIG_RESET_PHY_R */ #if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) diff --git a/board/LaCie/common/common.h b/board/LaCie/common/common.h index 2edd5ab..85e433c 100644 --- a/board/LaCie/common/common.h +++ b/board/LaCie/common/common.h @@ -12,6 +12,7 @@ #if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) void mv_phy_88e1116_init(const char *name, u16 phyaddr); +void mv_phy_88e1318_init(const char *name, u16 phyaddr); #endif #if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) int lacie_read_mac_address(uchar *mac); diff --git a/board/LaCie/netspace_v2/kwbimage-ns2l.cfg b/board/LaCie/netspace_v2/kwbimage-ns2l.cfg new file mode 100644 index 0000000..d008eb0 --- /dev/null +++ b/board/LaCie/netspace_v2/kwbimage-ns2l.cfg @@ -0,0 +1,162 @@ +# +# Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> +# +# Based on Kirkwood support: +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <prafulla@marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM spi # Boot from SPI flash + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed + +# Configure RGMII-0 interface pad voltage to 1.8V +DATA 0xFFD100e0 0x1B1B1B9B + +#Dram initalization for SINGLE x16 CL=5 @ 400MHz +DATA 0xFFD01400 0x43000618 # DDR Configuration register +# bit13-0: 0xa00 (2560 DDR2 clks refresh rate) +# bit23-14: zero +# bit24: 1= enable exit self refresh mode on DDR access +# bit25: 1 required +# bit29-26: zero +# bit31-30: 01 + +DATA 0xFFD01404 0x34143000 # DDR Controller Control Low +# bit 4: 0=addr/cmd in smame cycle +# bit 5: 0=clk is driven during self refresh, we don't care for APX +# bit 6: 0=use recommended falling edge of clk for addr/cmd +# bit14: 0=input buffer always powered up +# bit18: 1=cpu lock transaction enabled +# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 +# bit27-24: 8= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM +# bit30-28: 3 required +# bit31: 0=no additional STARTBURST delay + +DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1) +# bit7-4: TRCD +# bit11- 8: TRP +# bit15-12: TWR +# bit19-16: TWTR +# bit20: TRAS msb +# bit23-21: 0x0 +# bit27-24: TRRD +# bit31-28: TRTP + +DATA 0xFFD0140C 0x00000A19 # DDR Timing (High) +# bit6-0: TRFC +# bit8-7: TR2R +# bit10-9: TR2W +# bit12-11: TW2W +# bit31-13: zero required + +DATA 0xFFD01410 0x0000DDDD # DDR Address Control +# bit1-0: 00, Cs0width=x8 +# bit3-2: 10, Cs0size=512Mb +# bit5-4: 00, Cs2width=nonexistent +# bit7-6: 00, Cs1size =nonexistent +# bit9-8: 00, Cs2width=nonexistent +# bit11-10: 00, Cs2size =nonexistent +# bit13-12: 00, Cs3width=nonexistent +# bit15-14: 00, Cs3size =nonexistent +# bit16: 0, Cs0AddrSel +# bit17: 0, Cs1AddrSel +# bit18: 0, Cs2AddrSel +# bit19: 0, Cs3AddrSel +# bit31-20: 0 required + +DATA 0xFFD01414 0x00000000 # DDR Open Pages Control +# bit0: 0, OpenPage enabled +# bit31-1: 0 required + +DATA 0xFFD01418 0x00000000 # DDR Operation +# bit3-0: 0x0, DDR cmd +# bit31-4: 0 required + +DATA 0xFFD0141C 0x00000632 # DDR Mode +# bit2-0: 2, BurstLen=2 required +# bit3: 0, BurstType=0 required +# bit6-4: 4, CL=5 +# bit7: 0, TestMode=0 normal +# bit8: 0, DLL reset=0 normal +# bit11-9: 6, auto-precharge write recovery ???????????? +# bit12: 0, PD must be zero +# bit31-13: 0 required + +DATA 0xFFD01420 0x00000004 # DDR Extended Mode +# bit0: 0, DDR DLL enabled +# bit1: 1, DDR drive strenght reduced +# bit2: 1, DDR ODT control lsd enabled +# bit5-3: 000, required +# bit6: 1, DDR ODT control msb, enabled +# bit9-7: 000, required +# bit10: 0, differential DQS enabled +# bit11: 0, required +# bit12: 0, DDR output buffer enabled +# bit31-13: 0 required + +DATA 0xFFD01424 0x0000F07F # DDR Controller Control High +# bit2-0: 111, required +# bit3 : 1 , MBUS Burst Chop disabled +# bit6-4: 111, required +# bit7 : 1 , D2P Latency enabled +# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz +# bit9 : 0 , no half clock cycle addition to dataout +# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals +# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh +# bit15-12: 1111 required +# bit31-16: 0 required + +DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) +DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) + +DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 +DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size +# bit0: 1, Window enabled +# bit1: 0, Write Protect disabled +# bit3-2: 00, CS0 hit selected +# bit23-4: ones, required +# bit31-24: 0x07, Size (i.e. 128MB) + +DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled +DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled +DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled + +DATA 0xFFD01494 0x00010000 # DDR ODT Control (Low) +# bit3-0: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0 +# bit19-16:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 + +DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) +# bit1-0: 00, ODT0 controlled by ODT Control (low) register above +# bit3-2: 01, ODT1 active NEVER! +# bit31-4: zero, required + +DATA 0xFFD0149C 0x0000E40F # CPU ODT Control +# bit3-0: 1, ODT0Rd, Internal ODT asserted during read from DRAM bank0 +# bit7-4: 1, ODT0Wr, Internal ODT asserted during write to DRAM bank0 +# bit11-10:1, DQ_ODTSel. ODT select turned on + +DATA 0xFFD01480 0x00000001 # DDR Initialization Control +#bit0=1, enable DDR init upon this register write + +# End of Header extension +DATA 0x0 0x0 diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c index 68e8a77..101a80a 100644 --- a/board/LaCie/netspace_v2/netspace_v2.c +++ b/board/LaCie/netspace_v2/netspace_v2.c @@ -107,7 +107,11 @@ int misc_init_r(void) /* Configure and initialize PHY */ void reset_phy(void) { +#if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2) + mv_phy_88e1318_init("egiga0", 0); +#else mv_phy_88e1116_init("egiga0", 8); +#endif } #endif diff --git a/boards.cfg b/boards.cfg index 613d6b2..e4613a9 100644 --- a/boards.cfg +++ b/boards.cfg @@ -162,7 +162,9 @@ kmcoge5un arm arm926ejs km_arm keymile portl2 arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_PORTL2 inetspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:INETSPACE_V2 net2big_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:NET2BIG_V2 +netspace_lite_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_LITE_V2 netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MAX_V2 +netspace_mini_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MINI_V2 netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_V2 dreamplug arm arm926ejs - Marvell kirkwood guruplug arm arm926ejs - Marvell kirkwood diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 08aec04..b00c352 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -27,6 +27,12 @@ #elif defined(CONFIG_NETSPACE_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_V2 #define CONFIG_IDENT_STRING " NS v2" +#elif defined(CONFIG_NETSPACE_LITE_V2) +#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_LITE_V2 +#define CONFIG_IDENT_STRING " NS v2 Lite" +#elif defined(CONFIG_NETSPACE_MINI_V2) +#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MINI_V2 +#define CONFIG_IDENT_STRING " NS v2 Mini" #elif defined(CONFIG_NETSPACE_MAX_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2 #define CONFIG_IDENT_STRING " NS Max v2" @@ -41,8 +47,13 @@ * High Level Configuration Options (easy to change) */ #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KIRKWOOD /* SOC Family Name */ -#define CONFIG_KW88F6281 /* SOC Name */ +#define CONFIG_KIRKWOOD /* SoC Family Name */ +/* SoC name */ +#if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2) +#define CONFIG_KW88F6192 +#else +#define CONFIG_KW88F6281 +#endif #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ /* @@ -56,7 +67,9 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_I2C #define CONFIG_CMD_IDE +#ifndef CONFIG_NETSPACE_MINI_V2 /* No USB ports on Network Space v2 Mini */ #define CONFIG_CMD_USB +#endif /* * Core clock definition @@ -68,9 +81,14 @@ */ #define CONFIG_NR_DRAM_BANKS 1 -#ifdef CONFIG_INETSPACE_V2 -/* Different SDRAM configuration and size for Internet Space v2 */ +/* + * Different SDRAM configuration and size for some of the boards derived + * from the Network Space v2 + */ +#if defined(CONFIG_INETSPACE_V2) #define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-is2.cfg +#elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2) +#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg #endif /* -- 1.7.10 ^ permalink raw reply related [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v3 4/4] ARM: add support for d2 Network v2 2012-09-06 9:25 ` [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices Simon Guinot ` (2 preceding siblings ...) 2012-09-06 9:25 ` [U-Boot] [PATCH v3 3/4] ARM: add support for Network Space v2 Lite and Mini Simon Guinot @ 2012-09-06 9:25 ` Simon Guinot 2012-09-06 11:27 ` [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices Simon Guinot 4 siblings, 0 replies; 65+ messages in thread From: Simon Guinot @ 2012-09-06 9:25 UTC (permalink / raw) To: u-boot This patch adds support for the LaCie board d2 Network v2 which share a lot of hardware caracteristics with the 2Big Network v2. - CPU: Marvell 88F6281 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - 2 SATA ports: internal and eSATA - Gigabit ethernet: PHY Marvell 88E1116R - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 power switch - 1 SATA LED (bi-color, blue and red) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> --- Changes for v3: - Rebased against u-boot-mv/master and u-boot-arm/master. No changes for v2. boards.cfg | 1 + include/configs/lacie_kw.h | 10 ++++++++-- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/boards.cfg b/boards.cfg index e4613a9..2c7d351 100644 --- a/boards.cfg +++ b/boards.cfg @@ -160,6 +160,7 @@ kmnusa arm arm926ejs km_arm keymile mgcoge3un arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_MGCOGE3UN kmcoge5un arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_COGE5UN portl2 arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_PORTL2 +d2net_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:D2NET_V2 inetspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:INETSPACE_V2 net2big_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:NET2BIG_V2 netspace_lite_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_LITE_V2 diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index b00c352..3c0f838 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -36,6 +36,9 @@ #elif defined(CONFIG_NETSPACE_MAX_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2 #define CONFIG_IDENT_STRING " NS Max v2" +#elif defined(CONFIG_D2NET_V2) +#define CONFIG_MACH_TYPE MACH_TYPE_D2NET_V2 +#define CONFIG_IDENT_STRING " D2 v2" #elif defined(CONFIG_NET2BIG_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2 #define CONFIG_IDENT_STRING " 2Big v2" @@ -106,7 +109,9 @@ #define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */ #define CONFIG_SYS_IDE_MAXBUS 1 #define CONFIG_SYS_IDE_MAXDEVICE 1 -#if defined(CONFIG_NET2BIG_V2) +#if defined(CONFIG_D2NET_V2) +#define CONFIG_SYS_PROMPT "d2v2> " +#elif defined(CONFIG_NET2BIG_V2) #define CONFIG_SYS_PROMPT "2big2> " #else #define CONFIG_SYS_PROMPT "ns2> " @@ -126,7 +131,8 @@ */ #ifdef CONFIG_MVSATA_IDE #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_NET2BIG_V2) +#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \ + defined(CONFIG_NET2BIG_V2) #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET #endif #endif /* CONFIG_MVSATA_IDE */ -- 1.7.10 ^ permalink raw reply related [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices 2012-09-06 9:25 ` [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices Simon Guinot ` (3 preceding siblings ...) 2012-09-06 9:25 ` [U-Boot] [PATCH v3 4/4] ARM: add support for d2 Network v2 Simon Guinot @ 2012-09-06 11:27 ` Simon Guinot 2012-09-06 15:06 ` Albert ARIBAUD 4 siblings, 1 reply; 65+ messages in thread From: Simon Guinot @ 2012-09-06 11:27 UTC (permalink / raw) To: u-boot On Thu, Sep 06, 2012 at 11:25:23AM +0200, Simon Guinot wrote: > Changes for v3: > - Rebased against u-boot-mv/master and u-boot-arm/master. > > Changes for v2: > - Move board support and feature into a separate patch set. > - Move mach-types update into a separate patch. > > Simon Guinot (4): > lacie_kw: add support for EFI partitions > ARM: add netspace_mini_v2 to mach-types.h > ARM: add support for Network Space v2 Lite and Mini > ARM: add support for d2 Network v2 > > arch/arm/include/asm/mach-types.h | 13 +++ > board/LaCie/common/common.c | 36 ++++++- > board/LaCie/common/common.h | 1 + > board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 +++++++++++++++++++++++++++++ > board/LaCie/netspace_v2/netspace_v2.c | 4 + > boards.cfg | 3 + > include/configs/lacie_kw.h | 42 ++++++-- > 7 files changed, 252 insertions(+), 9 deletions(-) > create mode 100644 board/LaCie/netspace_v2/kwbimage-ns2l.cfg Hi Albert and Prafulla, I thinks I miss the point with this v3 patch series. I understand now, I have to drop the patch: "ARM: add netspace_mini_v2 to mach-types.h" The problem is that the boards netspace_mini_v2, and more recently netspace_lite_v2, have been removed from the Linux mach-types file. As a temporary solution, I could include the missing MACH_TYPE_ definitions to the header configs/lacie_kw.h. Is that correct ? If yes, do you want me to resend the whole patch series or just an update for the patch "ARM: add support for Network Space v2 Lite and Mini" ? Regards, Simon > > -- > 1.7.10 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 198 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120906/67995f0b/attachment.pgp> ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices 2012-09-06 11:27 ` [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices Simon Guinot @ 2012-09-06 15:06 ` Albert ARIBAUD 2012-09-06 18:17 ` Prafulla Wadaskar 0 siblings, 1 reply; 65+ messages in thread From: Albert ARIBAUD @ 2012-09-06 15:06 UTC (permalink / raw) To: u-boot Hi Simon, On Thu, 6 Sep 2012 13:27:19 +0200, Simon Guinot <simon.guinot@sequanux.org> wrote: > On Thu, Sep 06, 2012 at 11:25:23AM +0200, Simon Guinot wrote: > > Changes for v3: > > - Rebased against u-boot-mv/master and u-boot-arm/master. > > > > Changes for v2: > > - Move board support and feature into a separate patch set. > > - Move mach-types update into a separate patch. > > > > Simon Guinot (4): > > lacie_kw: add support for EFI partitions > > ARM: add netspace_mini_v2 to mach-types.h > > ARM: add support for Network Space v2 Lite and Mini > > ARM: add support for d2 Network v2 > > > > arch/arm/include/asm/mach-types.h | 13 +++ > > board/LaCie/common/common.c | 36 ++++++- > > board/LaCie/common/common.h | 1 + > > board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 > > +++++++++++++++++++++++++++++ > > board/LaCie/netspace_v2/netspace_v2.c | 4 + > > boards.cfg | 3 + > > include/configs/lacie_kw.h | 42 ++++++-- 7 files > > changed, 252 insertions(+), 9 deletions(-) create mode 100644 > > board/LaCie/netspace_v2/kwbimage-ns2l.cfg > > Hi Albert and Prafulla, > > I thinks I miss the point with this v3 patch series. I understand now, > I have to drop the patch: "ARM: add netspace_mini_v2 to mach-types.h" > > The problem is that the boards netspace_mini_v2, and more recently > netspace_lite_v2, have been removed from the Linux mach-types file. > As a temporary solution, I could include the missing MACH_TYPE_ > definitions to the header configs/lacie_kw.h. > > Is that correct ? Correct. Boards which are being dropped from Linux mach-types have not necessarily died or stopped using (older) Linux or U-Boot, so we need to keep their mach-types around, in their board config headers. I will pull the mach-types file myself and either remove redundant mach types from config header files or Cc: maintainers of boards the machine type of which have been dropped so that they fix their boards. > If yes, do you want me to resend the whole patch > series or just an update for the patch "ARM: add support for Network > Space v2 Lite and Mini" ? Only updating that patch in the series is fine with me. Prafulla ? > Regards, > > Simon Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices 2012-09-06 15:06 ` Albert ARIBAUD @ 2012-09-06 18:17 ` Prafulla Wadaskar 2012-09-06 20:51 ` [U-Boot] [PATCH v4 0/3] " Simon Guinot 0 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2012-09-06 18:17 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net] > Sent: 06 September 2012 08:07 > To: U-Boot > Cc: Simon Guinot; Prafulla Wadaskar > Subject: Re: [PATCH v3 0/4] Board support and feature for LaCie > devices > > Hi Simon, > > On Thu, 6 Sep 2012 13:27:19 +0200, Simon Guinot > <simon.guinot@sequanux.org> wrote: > > > On Thu, Sep 06, 2012 at 11:25:23AM +0200, Simon Guinot wrote: > > > Changes for v3: > > > - Rebased against u-boot-mv/master and u-boot-arm/master. > > > > > > Changes for v2: > > > - Move board support and feature into a separate patch set. > > > - Move mach-types update into a separate patch. > > > > > > Simon Guinot (4): > > > lacie_kw: add support for EFI partitions > > > ARM: add netspace_mini_v2 to mach-types.h > > > ARM: add support for Network Space v2 Lite and Mini > > > ARM: add support for d2 Network v2 > > > > > > arch/arm/include/asm/mach-types.h | 13 +++ > > > board/LaCie/common/common.c | 36 ++++++- > > > board/LaCie/common/common.h | 1 + > > > board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 > > > +++++++++++++++++++++++++++++ > > > board/LaCie/netspace_v2/netspace_v2.c | 4 + > > > boards.cfg | 3 + > > > include/configs/lacie_kw.h | 42 ++++++-- 7 files > > > changed, 252 insertions(+), 9 deletions(-) create mode 100644 > > > board/LaCie/netspace_v2/kwbimage-ns2l.cfg > > > > Hi Albert and Prafulla, > > > > I thinks I miss the point with this v3 patch series. I understand > now, > > I have to drop the patch: "ARM: add netspace_mini_v2 to mach- > types.h" > > > > The problem is that the boards netspace_mini_v2, and more recently > > netspace_lite_v2, have been removed from the Linux mach-types file. > > As a temporary solution, I could include the missing MACH_TYPE_ > > definitions to the header configs/lacie_kw.h. > > > > Is that correct ? > > Correct. Boards which are being dropped from Linux mach-types have not > necessarily died or stopped using (older) Linux or U-Boot, so we need > to keep their mach-types around, in their board config headers. > > I will pull the mach-types file myself and either remove redundant > mach > types from config header files or Cc: maintainers of boards the > machine > type of which have been dropped so that they fix their boards. > > > If yes, do you want me to resend the whole patch > > series or just an update for the patch "ARM: add support for Network > > Space v2 Lite and Mini" ? > > Only updating that patch in the series is fine with me. Prafulla ? If the MACHINE ID is not available in the mach_types.h, then we can define in the board specific file instead of updating mach_types.h? Hi Simon, can you take care of this and post v4? Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v4 0/3] Board support and feature for LaCie devices 2012-09-06 18:17 ` Prafulla Wadaskar @ 2012-09-06 20:51 ` Simon Guinot 2012-09-06 20:51 ` [U-Boot] [PATCH v4 1/3] lacie_kw: add support for EFI partitions Simon Guinot ` (3 more replies) 0 siblings, 4 replies; 65+ messages in thread From: Simon Guinot @ 2012-09-06 20:51 UTC (permalink / raw) To: u-boot Changes for v4: - Drop patch "ARM: add netspace_mini_v2 to mach-types.h". - Include missing MACH_TYPE_ in configs/lacie_kw.h. Changes for v3: - Rebased against u-boot-mv/master and u-boot-arm/master. Changes for v2: - Move board support and feature into a separate patch set. - Move mach-types update into a separate patch. Simon Guinot (3): lacie_kw: add support for EFI partitions ARM: add support for Network Space v2 Lite and Mini ARM: add support for d2 Network v2 board/LaCie/common/common.c | 36 ++++++- board/LaCie/common/common.h | 1 + board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 +++++++++++++++++++++++++++++ board/LaCie/netspace_v2/netspace_v2.c | 4 + boards.cfg | 3 + include/configs/lacie_kw.h | 44 ++++++-- 6 files changed, 241 insertions(+), 9 deletions(-) create mode 100644 board/LaCie/netspace_v2/kwbimage-ns2l.cfg -- 1.7.10 ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v4 1/3] lacie_kw: add support for EFI partitions 2012-09-06 20:51 ` [U-Boot] [PATCH v4 0/3] " Simon Guinot @ 2012-09-06 20:51 ` Simon Guinot 2012-09-06 20:51 ` [U-Boot] [PATCH v4 2/3] ARM: add support for Network Space v2 Lite and Mini Simon Guinot ` (2 subsequent siblings) 3 siblings, 0 replies; 65+ messages in thread From: Simon Guinot @ 2012-09-06 20:51 UTC (permalink / raw) To: u-boot Defines CONFIG_EFI_PARTITION for LaCie boards. Additionally this patch defines CONFIG_DOS_PARTITION. Note that this definition is implicit in mv_common.h when CONFIG_CMD_USB is enabled. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> --- No changes for v2, v3 and v4. include/configs/lacie_kw.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index c35c2db..08aec04 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -130,6 +130,12 @@ #endif /* CONFIG_CMD_I2C */ /* + * Partition support + */ +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION + +/* * File systems support */ #define CONFIG_CMD_EXT2 -- 1.7.10 ^ permalink raw reply related [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v4 2/3] ARM: add support for Network Space v2 Lite and Mini 2012-09-06 20:51 ` [U-Boot] [PATCH v4 0/3] " Simon Guinot 2012-09-06 20:51 ` [U-Boot] [PATCH v4 1/3] lacie_kw: add support for EFI partitions Simon Guinot @ 2012-09-06 20:51 ` Simon Guinot 2012-09-06 23:19 ` Prafulla Wadaskar 2012-09-06 20:51 ` [U-Boot] [PATCH v4 3/3] ARM: add support for d2 Network v2 Simon Guinot 2012-09-06 22:56 ` [U-Boot] [PATCH v4 0/3] Board support and feature for LaCie devices Prafulla Wadaskar 3 siblings, 1 reply; 65+ messages in thread From: Simon Guinot @ 2012-09-06 20:51 UTC (permalink / raw) To: u-boot This patch adds support for the LaCie boards Network Space v2 (Lite and Mini). This two boards are derived from the Network Space v2 and a lot of hardware caracteristics are shared. - CPU: Marvell 88F6192 800Mhz - SDRAM memory: 128MB DDR2 200Mhz - 1 SATA port: internal - Gigabit ethernet: PHY Marvell 88E1318 - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports (Lite only): host and host/device - 1 push button - 1 SATA LED (bi-color, blue and red) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> --- Changes for v4: - Include missing MACH_TYPE_ in configs/lacie_kw.h. No changes for v3. Changes for v2: - Move mach-types update into a separate patch. board/LaCie/common/common.c | 36 ++++++- board/LaCie/common/common.h | 1 + board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 +++++++++++++++++++++++++++++ board/LaCie/netspace_v2/netspace_v2.c | 4 + boards.cfg | 2 + include/configs/lacie_kw.h | 28 ++++- 6 files changed, 226 insertions(+), 7 deletions(-) create mode 100644 board/LaCie/netspace_v2/kwbimage-ns2l.cfg diff --git a/board/LaCie/common/common.c b/board/LaCie/common/common.c index 78d0edc..a62bf9f 100644 --- a/board/LaCie/common/common.c +++ b/board/LaCie/common/common.c @@ -13,10 +13,11 @@ #if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) +#define MII_MARVELL_PHY_PAGE 22 + #define MV88E1116_LED_FCTRL_REG 10 #define MV88E1116_CPRSP_CR3_REG 21 #define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) @@ -31,15 +32,44 @@ void mv_phy_88e1116_init(const char *name, u16 phyaddr) * Enable RGMII delay on Tx and Rx for CPU port * Ref: sec 4.7.2 of chip datasheet */ - miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 2); + miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 2); miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, ®); reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg); - miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 0); + miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 0); if (miiphy_reset(name, phyaddr) == 0) printf("88E1116 Initialized on %s\n", name); } + +void mv_phy_88e1318_init(const char *name, u16 phyaddr) +{ + u16 reg; + + if (miiphy_set_current_dev(name)) + return; + + /* + * Set control mode 4 for LED[0]. + */ + miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 3); + miiphy_read(name, phyaddr, 16, ®); + reg |= 0xf; + miiphy_write(name, phyaddr, 16, reg); + + /* + * Enable RGMII delay on Tx and Rx for CPU port + * Ref: sec 4.7.2 of chip datasheet + */ + miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 2); + miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, ®); + reg |= (MV88E1116_RGMII_TXTM_CTRL | MV88E1116_RGMII_RXTM_CTRL); + miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg); + miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 0); + + if (miiphy_reset(name, phyaddr) == 0) + printf("88E1318 Initialized on %s\n", name); +} #endif /* CONFIG_CMD_NET && CONFIG_RESET_PHY_R */ #if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) diff --git a/board/LaCie/common/common.h b/board/LaCie/common/common.h index 2edd5ab..85e433c 100644 --- a/board/LaCie/common/common.h +++ b/board/LaCie/common/common.h @@ -12,6 +12,7 @@ #if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) void mv_phy_88e1116_init(const char *name, u16 phyaddr); +void mv_phy_88e1318_init(const char *name, u16 phyaddr); #endif #if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) int lacie_read_mac_address(uchar *mac); diff --git a/board/LaCie/netspace_v2/kwbimage-ns2l.cfg b/board/LaCie/netspace_v2/kwbimage-ns2l.cfg new file mode 100644 index 0000000..d008eb0 --- /dev/null +++ b/board/LaCie/netspace_v2/kwbimage-ns2l.cfg @@ -0,0 +1,162 @@ +# +# Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> +# +# Based on Kirkwood support: +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <prafulla@marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM spi # Boot from SPI flash + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed + +# Configure RGMII-0 interface pad voltage to 1.8V +DATA 0xFFD100e0 0x1B1B1B9B + +#Dram initalization for SINGLE x16 CL=5 @ 400MHz +DATA 0xFFD01400 0x43000618 # DDR Configuration register +# bit13-0: 0xa00 (2560 DDR2 clks refresh rate) +# bit23-14: zero +# bit24: 1= enable exit self refresh mode on DDR access +# bit25: 1 required +# bit29-26: zero +# bit31-30: 01 + +DATA 0xFFD01404 0x34143000 # DDR Controller Control Low +# bit 4: 0=addr/cmd in smame cycle +# bit 5: 0=clk is driven during self refresh, we don't care for APX +# bit 6: 0=use recommended falling edge of clk for addr/cmd +# bit14: 0=input buffer always powered up +# bit18: 1=cpu lock transaction enabled +# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 +# bit27-24: 8= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM +# bit30-28: 3 required +# bit31: 0=no additional STARTBURST delay + +DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1) +# bit7-4: TRCD +# bit11- 8: TRP +# bit15-12: TWR +# bit19-16: TWTR +# bit20: TRAS msb +# bit23-21: 0x0 +# bit27-24: TRRD +# bit31-28: TRTP + +DATA 0xFFD0140C 0x00000A19 # DDR Timing (High) +# bit6-0: TRFC +# bit8-7: TR2R +# bit10-9: TR2W +# bit12-11: TW2W +# bit31-13: zero required + +DATA 0xFFD01410 0x0000DDDD # DDR Address Control +# bit1-0: 00, Cs0width=x8 +# bit3-2: 10, Cs0size=512Mb +# bit5-4: 00, Cs2width=nonexistent +# bit7-6: 00, Cs1size =nonexistent +# bit9-8: 00, Cs2width=nonexistent +# bit11-10: 00, Cs2size =nonexistent +# bit13-12: 00, Cs3width=nonexistent +# bit15-14: 00, Cs3size =nonexistent +# bit16: 0, Cs0AddrSel +# bit17: 0, Cs1AddrSel +# bit18: 0, Cs2AddrSel +# bit19: 0, Cs3AddrSel +# bit31-20: 0 required + +DATA 0xFFD01414 0x00000000 # DDR Open Pages Control +# bit0: 0, OpenPage enabled +# bit31-1: 0 required + +DATA 0xFFD01418 0x00000000 # DDR Operation +# bit3-0: 0x0, DDR cmd +# bit31-4: 0 required + +DATA 0xFFD0141C 0x00000632 # DDR Mode +# bit2-0: 2, BurstLen=2 required +# bit3: 0, BurstType=0 required +# bit6-4: 4, CL=5 +# bit7: 0, TestMode=0 normal +# bit8: 0, DLL reset=0 normal +# bit11-9: 6, auto-precharge write recovery ???????????? +# bit12: 0, PD must be zero +# bit31-13: 0 required + +DATA 0xFFD01420 0x00000004 # DDR Extended Mode +# bit0: 0, DDR DLL enabled +# bit1: 1, DDR drive strenght reduced +# bit2: 1, DDR ODT control lsd enabled +# bit5-3: 000, required +# bit6: 1, DDR ODT control msb, enabled +# bit9-7: 000, required +# bit10: 0, differential DQS enabled +# bit11: 0, required +# bit12: 0, DDR output buffer enabled +# bit31-13: 0 required + +DATA 0xFFD01424 0x0000F07F # DDR Controller Control High +# bit2-0: 111, required +# bit3 : 1 , MBUS Burst Chop disabled +# bit6-4: 111, required +# bit7 : 1 , D2P Latency enabled +# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz +# bit9 : 0 , no half clock cycle addition to dataout +# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals +# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh +# bit15-12: 1111 required +# bit31-16: 0 required + +DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) +DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) + +DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 +DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size +# bit0: 1, Window enabled +# bit1: 0, Write Protect disabled +# bit3-2: 00, CS0 hit selected +# bit23-4: ones, required +# bit31-24: 0x07, Size (i.e. 128MB) + +DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled +DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled +DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled + +DATA 0xFFD01494 0x00010000 # DDR ODT Control (Low) +# bit3-0: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0 +# bit19-16:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 + +DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) +# bit1-0: 00, ODT0 controlled by ODT Control (low) register above +# bit3-2: 01, ODT1 active NEVER! +# bit31-4: zero, required + +DATA 0xFFD0149C 0x0000E40F # CPU ODT Control +# bit3-0: 1, ODT0Rd, Internal ODT asserted during read from DRAM bank0 +# bit7-4: 1, ODT0Wr, Internal ODT asserted during write to DRAM bank0 +# bit11-10:1, DQ_ODTSel. ODT select turned on + +DATA 0xFFD01480 0x00000001 # DDR Initialization Control +#bit0=1, enable DDR init upon this register write + +# End of Header extension +DATA 0x0 0x0 diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c index 68e8a77..101a80a 100644 --- a/board/LaCie/netspace_v2/netspace_v2.c +++ b/board/LaCie/netspace_v2/netspace_v2.c @@ -107,7 +107,11 @@ int misc_init_r(void) /* Configure and initialize PHY */ void reset_phy(void) { +#if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2) + mv_phy_88e1318_init("egiga0", 0); +#else mv_phy_88e1116_init("egiga0", 8); +#endif } #endif diff --git a/boards.cfg b/boards.cfg index 613d6b2..e4613a9 100644 --- a/boards.cfg +++ b/boards.cfg @@ -162,7 +162,9 @@ kmcoge5un arm arm926ejs km_arm keymile portl2 arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_PORTL2 inetspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:INETSPACE_V2 net2big_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:NET2BIG_V2 +netspace_lite_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_LITE_V2 netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MAX_V2 +netspace_mini_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MINI_V2 netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_V2 dreamplug arm arm926ejs - Marvell kirkwood guruplug arm arm926ejs - Marvell kirkwood diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 08aec04..878d2a3 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -27,6 +27,14 @@ #elif defined(CONFIG_NETSPACE_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_V2 #define CONFIG_IDENT_STRING " NS v2" +#elif defined(CONFIG_NETSPACE_LITE_V2) +#define MACH_TYPE_NETSPACE_LITE_V2 2983 /* missing in mach-types.h */ +#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_LITE_V2 +#define CONFIG_IDENT_STRING " NS v2 Lite" +#elif defined(CONFIG_NETSPACE_MINI_V2) +#define MACH_TYPE_NETSPACE_MINI_V2 2831 /* missing in mach-types.h */ +#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MINI_V2 +#define CONFIG_IDENT_STRING " NS v2 Mini" #elif defined(CONFIG_NETSPACE_MAX_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2 #define CONFIG_IDENT_STRING " NS Max v2" @@ -41,8 +49,13 @@ * High Level Configuration Options (easy to change) */ #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KIRKWOOD /* SOC Family Name */ -#define CONFIG_KW88F6281 /* SOC Name */ +#define CONFIG_KIRKWOOD /* SoC Family Name */ +/* SoC name */ +#if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2) +#define CONFIG_KW88F6192 +#else +#define CONFIG_KW88F6281 +#endif #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ /* @@ -56,7 +69,9 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_I2C #define CONFIG_CMD_IDE +#ifndef CONFIG_NETSPACE_MINI_V2 /* No USB ports on Network Space v2 Mini */ #define CONFIG_CMD_USB +#endif /* * Core clock definition @@ -68,9 +83,14 @@ */ #define CONFIG_NR_DRAM_BANKS 1 -#ifdef CONFIG_INETSPACE_V2 -/* Different SDRAM configuration and size for Internet Space v2 */ +/* + * Different SDRAM configuration and size for some of the boards derived + * from the Network Space v2 + */ +#if defined(CONFIG_INETSPACE_V2) #define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-is2.cfg +#elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2) +#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg #endif /* -- 1.7.10 ^ permalink raw reply related [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v4 2/3] ARM: add support for Network Space v2 Lite and Mini 2012-09-06 20:51 ` [U-Boot] [PATCH v4 2/3] ARM: add support for Network Space v2 Lite and Mini Simon Guinot @ 2012-09-06 23:19 ` Prafulla Wadaskar 2012-09-07 9:27 ` Simon Guinot 0 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2012-09-06 23:19 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: Simon Guinot [mailto:simon.guinot at sequanux.org] > Sent: 06 September 2012 13:52 > To: Prafulla Wadaskar; Albert ARIBAUD > Cc: u-boot at lists.denx.de; Simon Guinot > Subject: [PATCH v4 2/3] ARM: add support for Network Space v2 Lite and > Mini > > This patch adds support for the LaCie boards Network Space v2 (Lite > and > Mini). This two boards are derived from the Network Space v2 and a lot > of hardware caracteristics are shared. > > - CPU: Marvell 88F6192 800Mhz > - SDRAM memory: 128MB DDR2 200Mhz > - 1 SATA port: internal > - Gigabit ethernet: PHY Marvell 88E1318 > - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) > - i2c EEPROM: 512 bytes (24C04 type) > - 2 USB2 ports (Lite only): host and host/device > - 1 push button > - 1 SATA LED (bi-color, blue and red) > > Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> > --- > Changes for v4: > - Include missing MACH_TYPE_ in configs/lacie_kw.h. > > No changes for v3. > > Changes for v2: > - Move mach-types update into a separate patch. > > board/LaCie/common/common.c | 36 ++++++- > board/LaCie/common/common.h | 1 + > board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 > +++++++++++++++++++++++++++++ Hi Simon, You have added one more cfg file in this patch Now you have three cfg files in this folder that just diff from each other for DRAM configuration. Whereas you can delete two of them, use maximum dram setting in cfg file, and then in board specific file you can tune the configuration for required size. You may look for this optimization. FYI: pls see the captured log of diff [prafulla at pe-dt061 u-boot-marvell.git (master)]$ diff board/LaCie/netspace_v2/kwbimage-ns2l.cfg board/LaCie/netspace_v2/kwbimage.cfg 44c44 < DATA 0xFFD01404 0x34143000 # DDR Controller Control Low --- > DATA 0xFFD01404 0x35143000 # DDR Controller Control Low 72c72 < DATA 0xFFD01410 0x0000DDDD # DDR Address Control --- > DATA 0xFFD01410 0x0000000C # DDR Address Control 74c74 < # bit3-2: 10, Cs0size=512Mb --- > # bit3-2: 11, Cs0size=1Gb 133c133 < DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size --- > DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size [prafulla at pe-dt061 u-boot-marvell.git (master)]$ diff board/LaCie/netspace_v2/kwbimage-ns2l.cfg board/LaCie/netspace_v2/kwbimage kwbimage.cfg kwbimage-is2.cfg kwbimage-ns2l.cfg [prafulla at pe-dt061 u-boot-marvell.git (master)]$ diff board/LaCie/netspace_v2/kwbimage-ns2l.cfg board/LaCie/netspace_v2/kwbimage-is2.cfg 44c44 < DATA 0xFFD01404 0x34143000 # DDR Controller Control Low --- > DATA 0xFFD01404 0x35143000 # DDR Controller Control Low 72c72 < DATA 0xFFD01410 0x0000DDDD # DDR Address Control --- > DATA 0xFFD01410 0x00000008 # DDR Address Control [prafulla at pe-dt061 u-boot-marvell.git (master)]$ diff board/LaCie/netspace_v2/kwbimage-is2.cfg board/LaCie/netspace_v2/kwbimage.cfg 72c72 < DATA 0xFFD01410 0x00000008 # DDR Address Control --- > DATA 0xFFD01410 0x0000000C # DDR Address Control 74c74 < # bit3-2: 10, Cs0size=512Mb --- > # bit3-2: 11, Cs0size=1Gb 133c133 < DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size --- > DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v4 2/3] ARM: add support for Network Space v2 Lite and Mini 2012-09-06 23:19 ` Prafulla Wadaskar @ 2012-09-07 9:27 ` Simon Guinot 2012-09-07 15:52 ` Prafulla Wadaskar 0 siblings, 1 reply; 65+ messages in thread From: Simon Guinot @ 2012-09-07 9:27 UTC (permalink / raw) To: u-boot On Thu, Sep 06, 2012 at 04:19:16PM -0700, Prafulla Wadaskar wrote: > > > > -----Original Message----- > > From: Simon Guinot [mailto:simon.guinot at sequanux.org] > > Sent: 06 September 2012 13:52 > > To: Prafulla Wadaskar; Albert ARIBAUD > > Cc: u-boot at lists.denx.de; Simon Guinot > > Subject: [PATCH v4 2/3] ARM: add support for Network Space v2 Lite and > > Mini > > > > This patch adds support for the LaCie boards Network Space v2 (Lite > > and > > Mini). This two boards are derived from the Network Space v2 and a lot > > of hardware caracteristics are shared. > > > > - CPU: Marvell 88F6192 800Mhz > > - SDRAM memory: 128MB DDR2 200Mhz > > - 1 SATA port: internal > > - Gigabit ethernet: PHY Marvell 88E1318 > > - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) > > - i2c EEPROM: 512 bytes (24C04 type) > > - 2 USB2 ports (Lite only): host and host/device > > - 1 push button > > - 1 SATA LED (bi-color, blue and red) > > > > Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> > > --- > > Changes for v4: > > - Include missing MACH_TYPE_ in configs/lacie_kw.h. > > > > No changes for v3. > > > > Changes for v2: > > - Move mach-types update into a separate patch. > > > > board/LaCie/common/common.c | 36 ++++++- > > board/LaCie/common/common.h | 1 + > > board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 > > +++++++++++++++++++++++++++++ > > Hi Simon, > > You have added one more cfg file in this patch > Now you have three cfg files in this folder that just diff from each other for DRAM configuration. > > Whereas you can delete two of them, use maximum dram setting in cfg file, and then in board specific file you can tune the configuration for required size. > > You may look for this optimization. > FYI: pls see the captured log of diff OK I will look at this but are you sure it is safe to update the DDR settings at run time (even only the size) ? > > [prafulla at pe-dt061 u-boot-marvell.git (master)]$ diff board/LaCie/netspace_v2/kwbimage-ns2l.cfg board/LaCie/netspace_v2/kwbimage.cfg > 44c44 > < DATA 0xFFD01404 0x34143000 # DDR Controller Control Low > --- > > DATA 0xFFD01404 0x35143000 # DDR Controller Control Low > 72c72 > < DATA 0xFFD01410 0x0000DDDD # DDR Address Control > --- > > DATA 0xFFD01410 0x0000000C # DDR Address Control > 74c74 For example, here we have a different SDRAM width configuration configuration for CS0: x8 against x16. It looks like it can't be merged. > < # bit3-2: 10, Cs0size=512Mb > --- > > # bit3-2: 11, Cs0size=1Gb > 133c133 > < DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size > --- > > DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size > [prafulla at pe-dt061 u-boot-marvell.git (master)]$ diff board/LaCie/netspace_v2/kwbimage-ns2l.cfg board/LaCie/netspace_v2/kwbimage > kwbimage.cfg kwbimage-is2.cfg kwbimage-ns2l.cfg > [prafulla at pe-dt061 u-boot-marvell.git (master)]$ diff board/LaCie/netspace_v2/kwbimage-ns2l.cfg board/LaCie/netspace_v2/kwbimage-is2.cfg > 44c44 > < DATA 0xFFD01404 0x34143000 # DDR Controller Control Low > --- > > DATA 0xFFD01404 0x35143000 # DDR Controller Control Low > 72c72 > < DATA 0xFFD01410 0x0000DDDD # DDR Address Control > --- > > DATA 0xFFD01410 0x00000008 # DDR Address Control Same comment as before. > [prafulla at pe-dt061 u-boot-marvell.git (master)]$ diff board/LaCie/netspace_v2/kwbimage-is2.cfg board/LaCie/netspace_v2/kwbimage.cfg > 72c72 > < DATA 0xFFD01410 0x00000008 # DDR Address Control > --- > > DATA 0xFFD01410 0x0000000C # DDR Address Control > 74c74 > < # bit3-2: 10, Cs0size=512Mb > --- > > # bit3-2: 11, Cs0size=1Gb > 133c133 > < DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size > --- > > DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size Ok. Here, the only difference is the size. So, this two configurations could probably be merged. Thanks for pointing this out. Considering this merge is rather optimisation than fix, is that good enough for you if I schedule this task for the next U-Boot release ? Regards, Simon -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 198 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120907/fb2c541d/attachment.pgp> ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v4 2/3] ARM: add support for Network Space v2 Lite and Mini 2012-09-07 9:27 ` Simon Guinot @ 2012-09-07 15:52 ` Prafulla Wadaskar 0 siblings, 0 replies; 65+ messages in thread From: Prafulla Wadaskar @ 2012-09-07 15:52 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: Simon Guinot [mailto:simon.guinot at sequanux.org] > Sent: 07 September 2012 02:28 > To: Prafulla Wadaskar > Cc: Albert ARIBAUD; u-boot at lists.denx.de > Subject: Re: [PATCH v4 2/3] ARM: add support for Network Space v2 Lite > and Mini > > On Thu, Sep 06, 2012 at 04:19:16PM -0700, Prafulla Wadaskar wrote: > > > > > > > -----Original Message----- > > > From: Simon Guinot [mailto:simon.guinot at sequanux.org] > > > Sent: 06 September 2012 13:52 > > > To: Prafulla Wadaskar; Albert ARIBAUD > > > Cc: u-boot at lists.denx.de; Simon Guinot > > > Subject: [PATCH v4 2/3] ARM: add support for Network Space v2 Lite > and > > > Mini > > > > > > This patch adds support for the LaCie boards Network Space v2 > (Lite > > > and > > > Mini). This two boards are derived from the Network Space v2 and a > lot > > > of hardware caracteristics are shared. > > > > > > - CPU: Marvell 88F6192 800Mhz > > > - SDRAM memory: 128MB DDR2 200Mhz > > > - 1 SATA port: internal > > > - Gigabit ethernet: PHY Marvell 88E1318 > > > - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) > > > - i2c EEPROM: 512 bytes (24C04 type) > > > - 2 USB2 ports (Lite only): host and host/device > > > - 1 push button > > > - 1 SATA LED (bi-color, blue and red) > > > > > > Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> > > > --- > > > Changes for v4: > > > - Include missing MACH_TYPE_ in configs/lacie_kw.h. > > > > > > No changes for v3. > > > > > > Changes for v2: > > > - Move mach-types update into a separate patch. > > > > > > board/LaCie/common/common.c | 36 ++++++- > > > board/LaCie/common/common.h | 1 + > > > board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 > > > +++++++++++++++++++++++++++++ > > > > Hi Simon, > > > > You have added one more cfg file in this patch > > Now you have three cfg files in this folder that just diff from each > other for DRAM configuration. > > > > Whereas you can delete two of them, use maximum dram setting in cfg > file, and then in board specific file you can tune the configuration > for required size. > > > > You may look for this optimization. > > FYI: pls see the captured log of diff > > OK I will look at this but are you sure it is safe to update the DDR > settings at run time (even only the size) ? I think so, size should not have any issues > > > > > [prafulla at pe-dt061 u-boot-marvell.git (master)]$ diff > board/LaCie/netspace_v2/kwbimage-ns2l.cfg > board/LaCie/netspace_v2/kwbimage.cfg > > 44c44 > > < DATA 0xFFD01404 0x34143000 # DDR Controller Control Low > > --- > > > DATA 0xFFD01404 0x35143000 # DDR Controller Control Low > > 72c72 > > < DATA 0xFFD01410 0x0000DDDD # DDR Address Control > > --- > > > DATA 0xFFD01410 0x0000000C # DDR Address Control > > 74c74 > > For example, here we have a different SDRAM width configuration > configuration for CS0: x8 against x16. It looks like it can't be > merged. Okay > > > < # bit3-2: 10, Cs0size=512Mb > > --- > > > # bit3-2: 11, Cs0size=1Gb > > 133c133 > > < DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size > > --- > > > DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size > > [prafulla at pe-dt061 u-boot-marvell.git (master)]$ diff > board/LaCie/netspace_v2/kwbimage-ns2l.cfg > board/LaCie/netspace_v2/kwbimage > > kwbimage.cfg kwbimage-is2.cfg kwbimage-ns2l.cfg > > [prafulla at pe-dt061 u-boot-marvell.git (master)]$ diff > board/LaCie/netspace_v2/kwbimage-ns2l.cfg > board/LaCie/netspace_v2/kwbimage-is2.cfg > > 44c44 > > < DATA 0xFFD01404 0x34143000 # DDR Controller Control Low > > --- > > > DATA 0xFFD01404 0x35143000 # DDR Controller Control Low > > 72c72 > > < DATA 0xFFD01410 0x0000DDDD # DDR Address Control > > --- > > > DATA 0xFFD01410 0x00000008 # DDR Address Control > > Same comment as before. > > > [prafulla at pe-dt061 u-boot-marvell.git (master)]$ diff > board/LaCie/netspace_v2/kwbimage-is2.cfg > board/LaCie/netspace_v2/kwbimage.cfg > > 72c72 > > < DATA 0xFFD01410 0x00000008 # DDR Address Control > > --- > > > DATA 0xFFD01410 0x0000000C # DDR Address Control > > 74c74 > > < # bit3-2: 10, Cs0size=512Mb > > --- > > > # bit3-2: 11, Cs0size=1Gb > > 133c133 > > < DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size > > --- > > > DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size > > Ok. Here, the only difference is the size. So, this two configurations > could probably be merged. Thanks for pointing this out. > > Considering this merge is rather optimisation than fix, is that good > enough for you if I schedule this task for the next U-Boot release ? Okay, you can take it for next release. Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v4 3/3] ARM: add support for d2 Network v2 2012-09-06 20:51 ` [U-Boot] [PATCH v4 0/3] " Simon Guinot 2012-09-06 20:51 ` [U-Boot] [PATCH v4 1/3] lacie_kw: add support for EFI partitions Simon Guinot 2012-09-06 20:51 ` [U-Boot] [PATCH v4 2/3] ARM: add support for Network Space v2 Lite and Mini Simon Guinot @ 2012-09-06 20:51 ` Simon Guinot 2012-09-06 22:56 ` [U-Boot] [PATCH v4 0/3] Board support and feature for LaCie devices Prafulla Wadaskar 3 siblings, 0 replies; 65+ messages in thread From: Simon Guinot @ 2012-09-06 20:51 UTC (permalink / raw) To: u-boot This patch adds support for the LaCie board d2 Network v2 which share a lot of hardware caracteristics with the 2Big Network v2. - CPU: Marvell 88F6281 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - 2 SATA ports: internal and eSATA - Gigabit ethernet: PHY Marvell 88E1116R - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 power switch - 1 SATA LED (bi-color, blue and red) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> --- No changes for v4. Changes for v3: - Rebased against u-boot-mv/master and u-boot-arm/master. No changes for v2. boards.cfg | 1 + include/configs/lacie_kw.h | 10 ++++++++-- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/boards.cfg b/boards.cfg index e4613a9..2c7d351 100644 --- a/boards.cfg +++ b/boards.cfg @@ -160,6 +160,7 @@ kmnusa arm arm926ejs km_arm keymile mgcoge3un arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_MGCOGE3UN kmcoge5un arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_COGE5UN portl2 arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_PORTL2 +d2net_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:D2NET_V2 inetspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:INETSPACE_V2 net2big_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:NET2BIG_V2 netspace_lite_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_LITE_V2 diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 878d2a3..09b5798 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -38,6 +38,9 @@ #elif defined(CONFIG_NETSPACE_MAX_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2 #define CONFIG_IDENT_STRING " NS Max v2" +#elif defined(CONFIG_D2NET_V2) +#define CONFIG_MACH_TYPE MACH_TYPE_D2NET_V2 +#define CONFIG_IDENT_STRING " D2 v2" #elif defined(CONFIG_NET2BIG_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2 #define CONFIG_IDENT_STRING " 2Big v2" @@ -108,7 +111,9 @@ #define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */ #define CONFIG_SYS_IDE_MAXBUS 1 #define CONFIG_SYS_IDE_MAXDEVICE 1 -#if defined(CONFIG_NET2BIG_V2) +#if defined(CONFIG_D2NET_V2) +#define CONFIG_SYS_PROMPT "d2v2> " +#elif defined(CONFIG_NET2BIG_V2) #define CONFIG_SYS_PROMPT "2big2> " #else #define CONFIG_SYS_PROMPT "ns2> " @@ -128,7 +133,8 @@ */ #ifdef CONFIG_MVSATA_IDE #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_NET2BIG_V2) +#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \ + defined(CONFIG_NET2BIG_V2) #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET #endif #endif /* CONFIG_MVSATA_IDE */ -- 1.7.10 ^ permalink raw reply related [flat|nested] 65+ messages in thread
* [U-Boot] [PATCH v4 0/3] Board support and feature for LaCie devices 2012-09-06 20:51 ` [U-Boot] [PATCH v4 0/3] " Simon Guinot ` (2 preceding siblings ...) 2012-09-06 20:51 ` [U-Boot] [PATCH v4 3/3] ARM: add support for d2 Network v2 Simon Guinot @ 2012-09-06 22:56 ` Prafulla Wadaskar 3 siblings, 0 replies; 65+ messages in thread From: Prafulla Wadaskar @ 2012-09-06 22:56 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: Simon Guinot [mailto:simon.guinot at sequanux.org] > Sent: 06 September 2012 13:52 > To: Prafulla Wadaskar; Albert ARIBAUD > Cc: u-boot at lists.denx.de; Simon Guinot > Subject: [PATCH v4 0/3] Board support and feature for LaCie devices > > Changes for v4: > - Drop patch "ARM: add netspace_mini_v2 to mach-types.h". > - Include missing MACH_TYPE_ in configs/lacie_kw.h. > > Changes for v3: > - Rebased against u-boot-mv/master and u-boot-arm/master. > > Changes for v2: > - Move board support and feature into a separate patch set. > - Move mach-types update into a separate patch. > > Simon Guinot (3): > lacie_kw: add support for EFI partitions > ARM: add support for Network Space v2 Lite and Mini > ARM: add support for d2 Network v2 > > board/LaCie/common/common.c | 36 ++++++- > board/LaCie/common/common.h | 1 + > board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 > +++++++++++++++++++++++++++++ > board/LaCie/netspace_v2/netspace_v2.c | 4 + > boards.cfg | 3 + > include/configs/lacie_kw.h | 44 ++++++-- > 6 files changed, 241 insertions(+), 9 deletions(-) > create mode 100644 board/LaCie/netspace_v2/kwbimage-ns2l.cfg > Applied this entire patch series to u-boot-marvell.git master branch Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-07-05 9:44 ` [U-Boot] Pull request for u-boot-marvell.git - go ahead Albert ARIBAUD ` (2 preceding siblings ...) 2012-09-03 9:20 ` Prafulla Wadaskar @ 2012-10-03 9:01 ` Prafulla Wadaskar 2012-10-03 16:06 ` Albert ARIBAUD 2012-12-20 6:56 ` Prafulla Wadaskar ` (2 subsequent siblings) 6 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2012-10-03 9:01 UTC (permalink / raw) To: u-boot Dear Albert, Please pull The following changes since commit 35729c6cb310d8bdfcf32ec0c23f226c714efda3: Nobuhiro Iwamatsu (1): rmobile: Fix build timer driver with BUILD_DIR are available in the git repository at: u-boot-marvell.git master branch. Albert ARIBAUD (1): edminiv2: increase malloc len to 256K Dinh Nguyen (1): ARM: kirkwood/orion5x: Use reset_cpu definition in include/common.h Gerlando Falauto (2): kirkwood: implement kw_sdram_bs_set() kirkwood: implement kw_sdram_size_adjust Holger Brunck (2): kirkwood: use c-struct for access to SDRAM addr decode registers arm/km: use kw_sdram_size_adjust to adjust SDRAM size Luka Perkov (2): kirkwood: fix mpp.h coding style kirkwood: add support for Iomega iConnect board Michael Walle (1): lsxl: also turn off fan in power down mode Simon Baatz (1): kirkwood: ib62x0: Invert SATA activity LEDs Simon Guinot (3): lacie_kw: add support for EFI partitions ARM: add support for Network Space v2 Lite and Mini ARM: add support for d2 Network v2 Valentin Longchamp (2): arm/km: add mv88e6352 configuration for kmnusa km_kirkwood: enable MV88E6352_SWITCH support for kmnusa MAINTAINERS | 1 + arch/arm/cpu/arm926ejs/kirkwood/dram.c | 58 +++++++++- arch/arm/include/asm/arch-kirkwood/cpu.h | 2 +- arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +- arch/arm/include/asm/arch-orion5x/cpu.h | 1 - board/LaCie/common/common.c | 36 ++++++- board/LaCie/common/common.h | 1 + board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 ++++++++++++++++++++++++++++ board/LaCie/netspace_v2/netspace_v2.c | 4 + board/buffalo/lsxl/lsxl.c | 6 +- board/iomega/iconnect/Makefile | 43 ++++++++ board/iomega/iconnect/iconnect.c | 107 +++++++++++++++++++ board/iomega/iconnect/iconnect.h | 39 +++++++ board/iomega/iconnect/kwbimage.cfg | 165 +++++++++++++++++++++++++++++ board/keymile/km_arm/km_arm.c | 68 ++++++++++++- board/raidsonic/ib62x0/ib62x0.c | 3 + board/raidsonic/ib62x0/ib62x0.h | 4 + boards.cfg | 4 + include/configs/edminiv2.h | 2 +- include/configs/iconnect.h | 129 ++++++++++++++++++++++ include/configs/km_kirkwood.h | 2 + include/configs/lacie_kw.h | 44 +++++++- 22 files changed, 862 insertions(+), 21 deletions(-) create mode 100644 board/LaCie/netspace_v2/kwbimage-ns2l.cfg create mode 100644 board/iomega/iconnect/Makefile create mode 100644 board/iomega/iconnect/iconnect.c create mode 100644 board/iomega/iconnect/iconnect.h create mode 100644 board/iomega/iconnect/kwbimage.cfg create mode 100644 include/configs/iconnect.h Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-10-03 9:01 ` [U-Boot] Pull request for u-boot-marvell.git Prafulla Wadaskar @ 2012-10-03 16:06 ` Albert ARIBAUD 0 siblings, 0 replies; 65+ messages in thread From: Albert ARIBAUD @ 2012-10-03 16:06 UTC (permalink / raw) To: u-boot Hi Prafulla, On Wed, 3 Oct 2012 02:01:14 -0700, Prafulla Wadaskar <prafulla@marvell.com> wrote: > Dear Albert, > > Please pull > The following changes since commit 35729c6cb310d8bdfcf32ec0c23f226c714efda3: > Nobuhiro Iwamatsu (1): > rmobile: Fix build timer driver with BUILD_DIR > > are available in the git repository at: > > u-boot-marvell.git master branch. > > Albert ARIBAUD (1): > edminiv2: increase malloc len to 256K > > Dinh Nguyen (1): > ARM: kirkwood/orion5x: Use reset_cpu definition in include/common.h > > Gerlando Falauto (2): > kirkwood: implement kw_sdram_bs_set() > kirkwood: implement kw_sdram_size_adjust > > Holger Brunck (2): > kirkwood: use c-struct for access to SDRAM addr decode registers > arm/km: use kw_sdram_size_adjust to adjust SDRAM size > > Luka Perkov (2): > kirkwood: fix mpp.h coding style > kirkwood: add support for Iomega iConnect board > > Michael Walle (1): > lsxl: also turn off fan in power down mode > > Simon Baatz (1): > kirkwood: ib62x0: Invert SATA activity LEDs > > Simon Guinot (3): > lacie_kw: add support for EFI partitions > ARM: add support for Network Space v2 Lite and Mini > ARM: add support for d2 Network v2 > > Valentin Longchamp (2): > arm/km: add mv88e6352 configuration for kmnusa > km_kirkwood: enable MV88E6352_SWITCH support for kmnusa > > MAINTAINERS | 1 + > arch/arm/cpu/arm926ejs/kirkwood/dram.c | 58 +++++++++- > arch/arm/include/asm/arch-kirkwood/cpu.h | 2 +- > arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +- > arch/arm/include/asm/arch-orion5x/cpu.h | 1 - > board/LaCie/common/common.c | 36 ++++++- > board/LaCie/common/common.h | 1 + > board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 ++++++++++++++++++++++++++++ > board/LaCie/netspace_v2/netspace_v2.c | 4 + > board/buffalo/lsxl/lsxl.c | 6 +- > board/iomega/iconnect/Makefile | 43 ++++++++ > board/iomega/iconnect/iconnect.c | 107 +++++++++++++++++++ > board/iomega/iconnect/iconnect.h | 39 +++++++ > board/iomega/iconnect/kwbimage.cfg | 165 +++++++++++++++++++++++++++++ > board/keymile/km_arm/km_arm.c | 68 ++++++++++++- > board/raidsonic/ib62x0/ib62x0.c | 3 + > board/raidsonic/ib62x0/ib62x0.h | 4 + > boards.cfg | 4 + > include/configs/edminiv2.h | 2 +- > include/configs/iconnect.h | 129 ++++++++++++++++++++++ > include/configs/km_kirkwood.h | 2 + > include/configs/lacie_kw.h | 44 +++++++- > 22 files changed, 862 insertions(+), 21 deletions(-) > create mode 100644 board/LaCie/netspace_v2/kwbimage-ns2l.cfg > create mode 100644 board/iomega/iconnect/Makefile > create mode 100644 board/iomega/iconnect/iconnect.c > create mode 100644 board/iomega/iconnect/iconnect.h > create mode 100644 board/iomega/iconnect/kwbimage.cfg > create mode 100644 include/configs/iconnect.h > > Regards... > Prafulla . . . > > Applied to u-boot-arm/master, thanks! Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-07-05 9:44 ` [U-Boot] Pull request for u-boot-marvell.git - go ahead Albert ARIBAUD ` (3 preceding siblings ...) 2012-10-03 9:01 ` [U-Boot] Pull request for u-boot-marvell.git Prafulla Wadaskar @ 2012-12-20 6:56 ` Prafulla Wadaskar 2012-12-20 10:05 ` Prafulla Wadaskar [not found] ` <DCB55AE5D43FB64FA6D3F5573FA2D42B1A3B957247@SC-VEXCH4.marvell.com> 6 siblings, 0 replies; 65+ messages in thread From: Prafulla Wadaskar @ 2012-12-20 6:56 UTC (permalink / raw) To: u-boot Dear Albert, Please pull The following changes since commit b8a7c467960ffb4d5a5e1eef5f7783fb6f594542: Albert ARIBAUD (1): Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' are available in the git repository at: u-boot-marvell.git master branch. Albert ARIBAUD (3): mv88e61xx: refactor PHY and SWITCH level-code kirkwood: make MPP arrays static const ARM: lacie_kw: add support for WIRELESS_SPACE Holger Brunck (3): arm/km: fix memory settings km/common: drop unneeded std* environment variables km/common: cosmetic change reported from checkpatch Valentin Longchamp (1): arm/km: remove duplicate code arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 2 +- arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +- board/LaCie/net2big_v2/net2big_v2.c | 2 +- board/LaCie/netspace_v2/netspace_v2.c | 2 +- board/LaCie/wireless_space/Makefile | 46 +++ board/LaCie/wireless_space/kwbimage.cfg | 82 ++++ board/LaCie/wireless_space/wireless_space.c | 176 ++++++++ board/Marvell/dreamplug/dreamplug.c | 2 +- board/Marvell/guruplug/guruplug.c | 2 +- board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +- board/Marvell/openrd/openrd.c | 2 +- board/Marvell/rd6281a/rd6281a.c | 2 +- board/Marvell/sheevaplug/sheevaplug.c | 2 +- board/Seagate/dockstar/dockstar.c | 2 +- board/buffalo/lsxl/lsxl.c | 2 +- board/cloudengines/pogo_e02/pogo_e02.c | 2 +- board/d-link/dns325/dns325.c | 2 +- board/iomega/iconnect/iconnect.c | 2 +- board/karo/tk71/tk71.c | 2 +- board/keymile/common/common.c | 2 +- board/keymile/km_arm/km_arm.c | 16 +- board/keymile/km_arm/kwbimage-memphis.cfg | 6 +- board/keymile/km_arm/kwbimage.cfg | 6 +- board/keymile/km_arm/kwbimage_128M16_1.cfg | 25 +- board/keymile/km_arm/kwbimage_256M8_1.cfg | 25 +- board/raidsonic/ib62x0/ib62x0.c | 2 +- boards.cfg | 1 + drivers/net/phy/mv88e61xx.c | 495 ++++++++++++++-------- drivers/net/phy/mv88e61xx.h | 39 ++- drivers/spi/kirkwood_spi.c | 12 +- include/configs/km/keymile-common.h | 3 - include/configs/wireless_space.h | 194 +++++++++ include/netdev.h | 21 +- 33 files changed, 891 insertions(+), 292 deletions(-) create mode 100644 board/LaCie/wireless_space/Makefile create mode 100644 board/LaCie/wireless_space/kwbimage.cfg create mode 100644 board/LaCie/wireless_space/wireless_space.c create mode 100644 include/configs/wireless_space.h Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-07-05 9:44 ` [U-Boot] Pull request for u-boot-marvell.git - go ahead Albert ARIBAUD ` (4 preceding siblings ...) 2012-12-20 6:56 ` Prafulla Wadaskar @ 2012-12-20 10:05 ` Prafulla Wadaskar 2012-12-23 15:10 ` Albert ARIBAUD [not found] ` <DCB55AE5D43FB64FA6D3F5573FA2D42B1A3B957247@SC-VEXCH4.marvell.com> 6 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2012-12-20 10:05 UTC (permalink / raw) To: u-boot Dear Albert Please discard my earlier pull request and please pull The following changes since commit b8a7c467960ffb4d5a5e1eef5f7783fb6f594542: Albert ARIBAUD (1): Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' are available in the git repository at: u-boot-marvell.git master branch. Albert ARIBAUD (3): mv88e61xx: refactor PHY and SWITCH level-code kirkwood: make MPP arrays static const ARM: lacie_kw: add support for WIRELESS_SPACE Holger Brunck (3): arm/km: fix memory settings km/common: drop unneeded std* environment variables km/common: cosmetic change reported from checkpatch Luke Lowrey (1): arch-kirkwood: Ethernet port macro returning incorrect address Michael Walle (1): lsxl: unset ncip for rescue mode Valentin Longchamp (1): arm/km: remove duplicate code andreas.devel at googlemail.com (1): mv-common.h: increase malloc arena to 4MiB arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 2 +- arch/arm/include/asm/arch-kirkwood/cpu.h | 2 +- arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +- board/LaCie/net2big_v2/net2big_v2.c | 2 +- board/LaCie/netspace_v2/netspace_v2.c | 2 +- board/LaCie/wireless_space/Makefile | 46 +++ board/LaCie/wireless_space/kwbimage.cfg | 82 ++++ board/LaCie/wireless_space/wireless_space.c | 176 ++++++++ board/Marvell/dreamplug/dreamplug.c | 2 +- board/Marvell/guruplug/guruplug.c | 2 +- board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +- board/Marvell/openrd/openrd.c | 2 +- board/Marvell/rd6281a/rd6281a.c | 2 +- board/Marvell/sheevaplug/sheevaplug.c | 2 +- board/Seagate/dockstar/dockstar.c | 2 +- board/buffalo/lsxl/lsxl.c | 7 +- board/cloudengines/pogo_e02/pogo_e02.c | 2 +- board/d-link/dns325/dns325.c | 2 +- board/iomega/iconnect/iconnect.c | 2 +- board/karo/tk71/tk71.c | 2 +- board/keymile/common/common.c | 2 +- board/keymile/km_arm/km_arm.c | 16 +- board/keymile/km_arm/kwbimage-memphis.cfg | 6 +- board/keymile/km_arm/kwbimage.cfg | 6 +- board/keymile/km_arm/kwbimage_128M16_1.cfg | 25 +- board/keymile/km_arm/kwbimage_256M8_1.cfg | 25 +- board/raidsonic/ib62x0/ib62x0.c | 2 +- boards.cfg | 1 + drivers/net/phy/mv88e61xx.c | 495 ++++++++++++++-------- drivers/net/phy/mv88e61xx.h | 39 ++- drivers/spi/kirkwood_spi.c | 12 +- include/configs/km/keymile-common.h | 3 - include/configs/lsxl.h | 2 +- include/configs/mv-common.h | 2 +- include/configs/wireless_space.h | 194 +++++++++ include/netdev.h | 21 +- 36 files changed, 896 insertions(+), 298 deletions(-) create mode 100644 board/LaCie/wireless_space/Makefile create mode 100644 board/LaCie/wireless_space/kwbimage.cfg create mode 100644 board/LaCie/wireless_space/wireless_space.c create mode 100644 include/configs/wireless_space.h Regards... Prafulla . . . > -----Original Message----- > From: Prafulla Wadaskar > Sent: 20 December 2012 12:27 > To: 'Albert ARIBAUD' > Cc: 'u-boot at lists.denx.de'; Ashish Karkare; Prabhanjan Sarnaik; > 'Wolfgang Denk' > Subject: Pull request for u-boot-marvell.git > > Dear Albert, > > Please pull > The following changes since commit > b8a7c467960ffb4d5a5e1eef5f7783fb6f594542: > Albert ARIBAUD (1): > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' > > are available in the git repository at: > > u-boot-marvell.git master branch. > > Albert ARIBAUD (3): > mv88e61xx: refactor PHY and SWITCH level-code > kirkwood: make MPP arrays static const > ARM: lacie_kw: add support for WIRELESS_SPACE > > Holger Brunck (3): > arm/km: fix memory settings > km/common: drop unneeded std* environment variables > km/common: cosmetic change reported from checkpatch > > Valentin Longchamp (1): > arm/km: remove duplicate code > > arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 2 +- > arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +- > board/LaCie/net2big_v2/net2big_v2.c | 2 +- > board/LaCie/netspace_v2/netspace_v2.c | 2 +- > board/LaCie/wireless_space/Makefile | 46 +++ > board/LaCie/wireless_space/kwbimage.cfg | 82 ++++ > board/LaCie/wireless_space/wireless_space.c | 176 ++++++++ > board/Marvell/dreamplug/dreamplug.c | 2 +- > board/Marvell/guruplug/guruplug.c | 2 +- > board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +- > board/Marvell/openrd/openrd.c | 2 +- > board/Marvell/rd6281a/rd6281a.c | 2 +- > board/Marvell/sheevaplug/sheevaplug.c | 2 +- > board/Seagate/dockstar/dockstar.c | 2 +- > board/buffalo/lsxl/lsxl.c | 2 +- > board/cloudengines/pogo_e02/pogo_e02.c | 2 +- > board/d-link/dns325/dns325.c | 2 +- > board/iomega/iconnect/iconnect.c | 2 +- > board/karo/tk71/tk71.c | 2 +- > board/keymile/common/common.c | 2 +- > board/keymile/km_arm/km_arm.c | 16 +- > board/keymile/km_arm/kwbimage-memphis.cfg | 6 +- > board/keymile/km_arm/kwbimage.cfg | 6 +- > board/keymile/km_arm/kwbimage_128M16_1.cfg | 25 +- > board/keymile/km_arm/kwbimage_256M8_1.cfg | 25 +- > board/raidsonic/ib62x0/ib62x0.c | 2 +- > boards.cfg | 1 + > drivers/net/phy/mv88e61xx.c | 495 > ++++++++++++++-------- > drivers/net/phy/mv88e61xx.h | 39 ++- > drivers/spi/kirkwood_spi.c | 12 +- > include/configs/km/keymile-common.h | 3 - > include/configs/wireless_space.h | 194 +++++++++ > include/netdev.h | 21 +- > 33 files changed, 891 insertions(+), 292 deletions(-) > create mode 100644 board/LaCie/wireless_space/Makefile > create mode 100644 board/LaCie/wireless_space/kwbimage.cfg > create mode 100644 board/LaCie/wireless_space/wireless_space.c > create mode 100644 include/configs/wireless_space.h > > Regards... > Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-12-20 10:05 ` Prafulla Wadaskar @ 2012-12-23 15:10 ` Albert ARIBAUD 2013-01-07 12:26 ` Prafulla Wadaskar 0 siblings, 1 reply; 65+ messages in thread From: Albert ARIBAUD @ 2012-12-23 15:10 UTC (permalink / raw) To: u-boot Hi Prafulla, On Thu, 20 Dec 2012 02:05:36 -0800, Prafulla Wadaskar <prafulla@marvell.com> wrote: > Dear Albert > Please discard my earlier pull request and please pull > The following changes since commit b8a7c467960ffb4d5a5e1eef5f7783fb6f594542: > Albert ARIBAUD (1): > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' > > are available in the git repository at: > > u-boot-marvell.git master branch. > > Albert ARIBAUD (3): > mv88e61xx: refactor PHY and SWITCH level-code > kirkwood: make MPP arrays static const > ARM: lacie_kw: add support for WIRELESS_SPACE > > Holger Brunck (3): > arm/km: fix memory settings > km/common: drop unneeded std* environment variables > km/common: cosmetic change reported from checkpatch > > Luke Lowrey (1): > arch-kirkwood: Ethernet port macro returning incorrect address > > Michael Walle (1): > lsxl: unset ncip for rescue mode > > Valentin Longchamp (1): > arm/km: remove duplicate code > > andreas.devel at googlemail.com (1): > mv-common.h: increase malloc arena to 4MiB Is that last commit really supposed to be with Andreas Bie?mann's e-mail only, without his name? Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-12-23 15:10 ` Albert ARIBAUD @ 2013-01-07 12:26 ` Prafulla Wadaskar 2013-01-08 11:35 ` Andreas Bießmann 2013-01-08 15:03 ` Albert ARIBAUD 0 siblings, 2 replies; 65+ messages in thread From: Prafulla Wadaskar @ 2013-01-07 12:26 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net] > Sent: 23 December 2012 20:40 > To: Prafulla Wadaskar > Cc: 'u-boot at lists.denx.de'; Ashish Karkare; Prabhanjan Sarnaik; > 'Wolfgang Denk'; Andreas Bie?mann > Subject: Re: Pull request for u-boot-marvell.git > > Hi Prafulla, > > On Thu, 20 Dec 2012 02:05:36 -0800, Prafulla Wadaskar > <prafulla@marvell.com> wrote: > > Dear Albert > > Please discard my earlier pull request and please pull > > The following changes since commit > b8a7c467960ffb4d5a5e1eef5f7783fb6f594542: > > Albert ARIBAUD (1): > > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' > > > > are available in the git repository at: > > > > u-boot-marvell.git master branch. > > > > Albert ARIBAUD (3): > > mv88e61xx: refactor PHY and SWITCH level-code > > kirkwood: make MPP arrays static const > > ARM: lacie_kw: add support for WIRELESS_SPACE > > > > Holger Brunck (3): > > arm/km: fix memory settings > > km/common: drop unneeded std* environment variables > > km/common: cosmetic change reported from checkpatch > > > > Luke Lowrey (1): > > arch-kirkwood: Ethernet port macro returning incorrect address > > > > Michael Walle (1): > > lsxl: unset ncip for rescue mode > > > > Valentin Longchamp (1): > > arm/km: remove duplicate code > > > > andreas.devel at googlemail.com (1): > > mv-common.h: increase malloc arena to 4MiB > > Is that last commit really supposed to be with Andreas Bie?mann's > e-mail only, without his name? Hi Albert, Sorry for the late reply, Yes, it is with Andreas Bie?mann' email only, I wonder how his name is removed from this commit. I will check and let you know. Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-01-07 12:26 ` Prafulla Wadaskar @ 2013-01-08 11:35 ` Andreas Bießmann 2013-01-08 15:03 ` Albert ARIBAUD 1 sibling, 0 replies; 65+ messages in thread From: Andreas Bießmann @ 2013-01-08 11:35 UTC (permalink / raw) To: u-boot Dear Prafulla Wadaskar, On 07.01.2013 13:26, Prafulla Wadaskar wrote: > > >> -----Original Message----- >> From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net] >> Sent: 23 December 2012 20:40 >> To: Prafulla Wadaskar >> Cc: 'u-boot at lists.denx.de'; Ashish Karkare; Prabhanjan Sarnaik; >> 'Wolfgang Denk'; Andreas Bie?mann >> Subject: Re: Pull request for u-boot-marvell.git >> >> Hi Prafulla, >> >> On Thu, 20 Dec 2012 02:05:36 -0800, Prafulla Wadaskar >> <prafulla@marvell.com> wrote: >>> Dear Albert >>> Please discard my earlier pull request and please pull >>> The following changes since commit >> b8a7c467960ffb4d5a5e1eef5f7783fb6f594542: <snip> >>> andreas.devel at googlemail.com (1): >>> mv-common.h: increase malloc arena to 4MiB >> >> Is that last commit really supposed to be with Andreas Bie?mann's >> e-mail only, without his name? > > Hi Albert, > Sorry for the late reply, > Yes, it is with Andreas Bie?mann' email only, I wonder how his name is removed from this commit. > I will check and let you know. maybe this is again some encoding issue. The original 'From' is like that: ---8<--- From: =?UTF-8?q?Andreas=20Bie=C3=9Fmann?= <andreas.devel@googlemail.com> --->8--- Maybe somehow your toolchain removed the coded string. Git however can work with this like a charm. So this is just an asumption, I do not know your toolchain. Best regards Andreas Bie?mann ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-01-07 12:26 ` Prafulla Wadaskar 2013-01-08 11:35 ` Andreas Bießmann @ 2013-01-08 15:03 ` Albert ARIBAUD 2013-01-08 17:21 ` Prafulla Wadaskar 1 sibling, 1 reply; 65+ messages in thread From: Albert ARIBAUD @ 2013-01-08 15:03 UTC (permalink / raw) To: u-boot Hi Prafulla, On Mon, 7 Jan 2013 04:26:09 -0800, Prafulla Wadaskar <prafulla@marvell.com> wrote: > > > > -----Original Message----- > > From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net] > > Sent: 23 December 2012 20:40 > > To: Prafulla Wadaskar > > Cc: 'u-boot at lists.denx.de'; Ashish Karkare; Prabhanjan Sarnaik; > > 'Wolfgang Denk'; Andreas Bie?mann > > Subject: Re: Pull request for u-boot-marvell.git > > > > Hi Prafulla, > > > > On Thu, 20 Dec 2012 02:05:36 -0800, Prafulla Wadaskar > > <prafulla@marvell.com> wrote: > > > Dear Albert > > > Please discard my earlier pull request and please pull > > > The following changes since commit > > b8a7c467960ffb4d5a5e1eef5f7783fb6f594542: > > > Albert ARIBAUD (1): > > > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' > > > > > > are available in the git repository at: > > > > > > u-boot-marvell.git master branch. > > > > > > Albert ARIBAUD (3): > > > mv88e61xx: refactor PHY and SWITCH level-code > > > kirkwood: make MPP arrays static const > > > ARM: lacie_kw: add support for WIRELESS_SPACE > > > > > > Holger Brunck (3): > > > arm/km: fix memory settings > > > km/common: drop unneeded std* environment variables > > > km/common: cosmetic change reported from checkpatch > > > > > > Luke Lowrey (1): > > > arch-kirkwood: Ethernet port macro returning incorrect address > > > > > > Michael Walle (1): > > > lsxl: unset ncip for rescue mode > > > > > > Valentin Longchamp (1): > > > arm/km: remove duplicate code > > > > > > andreas.devel at googlemail.com (1): > > > mv-common.h: increase malloc arena to 4MiB > > > > Is that last commit really supposed to be with Andreas Bie?mann's > > e-mail only, without his name? > > Hi Albert, > Sorry for the late reply, > Yes, it is with Andreas Bie?mann' email only, I wonder how his name is removed from this commit. > I will check and let you know. Ok - note that meanwhile, I have merged in TI and IMX. > Regards... > Prafulla . . . Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-01-08 15:03 ` Albert ARIBAUD @ 2013-01-08 17:21 ` Prafulla Wadaskar 2013-01-08 19:14 ` Albert ARIBAUD 2013-01-10 7:54 ` Albert ARIBAUD 0 siblings, 2 replies; 65+ messages in thread From: Prafulla Wadaskar @ 2013-01-08 17:21 UTC (permalink / raw) To: u-boot Dear Albert Please pull The following changes since commit 7528cf5f016b5b8b8b12b373f6f31a10bf89233d: Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-01-08 14:59:37 +0100) are available in the git repository at: u-boot-marvell.git master branch. Albert ARIBAUD (3): mv88e61xx: refactor PHY and SWITCH level-code kirkwood: make MPP arrays static const ARM: lacie_kw: add support for WIRELESS_SPACE Andreas Bie?mann (1): mv-common.h: increase malloc arena to 4MiB Holger Brunck (3): arm/km: fix memory settings km/common: drop unneeded std* environment variables km/common: cosmetic change reported from checkpatch Luke Lowrey (1): arch-kirkwood: Ethernet port macro returning incorrect address Michael Walle (1): lsxl: unset ncip for rescue mode Valentin Longchamp (1): arm/km: remove duplicate code arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 2 +- arch/arm/include/asm/arch-kirkwood/cpu.h | 2 +- arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +- board/LaCie/net2big_v2/net2big_v2.c | 2 +- board/LaCie/netspace_v2/netspace_v2.c | 2 +- board/LaCie/wireless_space/Makefile | 46 +++ board/LaCie/wireless_space/kwbimage.cfg | 82 ++++ board/LaCie/wireless_space/wireless_space.c | 176 ++++++++ board/Marvell/dreamplug/dreamplug.c | 2 +- board/Marvell/guruplug/guruplug.c | 2 +- board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +- board/Marvell/openrd/openrd.c | 2 +- board/Marvell/rd6281a/rd6281a.c | 2 +- board/Marvell/sheevaplug/sheevaplug.c | 2 +- board/Seagate/dockstar/dockstar.c | 2 +- board/buffalo/lsxl/lsxl.c | 7 +- board/cloudengines/pogo_e02/pogo_e02.c | 2 +- board/d-link/dns325/dns325.c | 2 +- board/iomega/iconnect/iconnect.c | 2 +- board/karo/tk71/tk71.c | 2 +- board/keymile/common/common.c | 2 +- board/keymile/km_arm/km_arm.c | 16 +- board/keymile/km_arm/kwbimage-memphis.cfg | 6 +- board/keymile/km_arm/kwbimage.cfg | 6 +- board/keymile/km_arm/kwbimage_128M16_1.cfg | 25 +- board/keymile/km_arm/kwbimage_256M8_1.cfg | 25 +- board/raidsonic/ib62x0/ib62x0.c | 2 +- boards.cfg | 1 + drivers/net/phy/mv88e61xx.c | 495 ++++++++++++++-------- drivers/net/phy/mv88e61xx.h | 39 ++- drivers/spi/kirkwood_spi.c | 12 +- include/configs/km/keymile-common.h | 3 - include/configs/lsxl.h | 2 +- include/configs/mv-common.h | 2 +- include/configs/wireless_space.h | 194 +++++++++ include/netdev.h | 21 +- 36 files changed, 896 insertions(+), 298 deletions(-) create mode 100644 board/LaCie/wireless_space/Makefile create mode 100644 board/LaCie/wireless_space/kwbimage.cfg create mode 100644 board/LaCie/wireless_space/wireless_space.c create mode 100644 include/configs/wireless_space.h Regards... Prafulla . . . ________________________________________ From: Albert ARIBAUD [albert.u.boot at aribaud.net] Sent: Tuesday, January 08, 2013 8:33 PM To: Prafulla Wadaskar Cc: 'u-boot at lists.denx.de'; Ashish Karkare; Prabhanjan Sarnaik; 'Wolfgang Denk'; Andreas Bie?mann Subject: Re: Pull request for u-boot-marvell.git Hi Prafulla, On Mon, 7 Jan 2013 04:26:09 -0800, Prafulla Wadaskar <prafulla@marvell.com> wrote: > > > > -----Original Message----- > > From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net] > > Sent: 23 December 2012 20:40 > > To: Prafulla Wadaskar > > Cc: 'u-boot at lists.denx.de'; Ashish Karkare; Prabhanjan Sarnaik; > > 'Wolfgang Denk'; Andreas Bie?mann > > Subject: Re: Pull request for u-boot-marvell.git > > > > Hi Prafulla, > > > > On Thu, 20 Dec 2012 02:05:36 -0800, Prafulla Wadaskar > > <prafulla@marvell.com> wrote: > > > Dear Albert > > > Please discard my earlier pull request and please pull > > > The following changes since commit > > b8a7c467960ffb4d5a5e1eef5f7783fb6f594542: > > > Albert ARIBAUD (1): > > > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' > > > > > > are available in the git repository at: > > > > > > u-boot-marvell.git master branch. > > > > > > Albert ARIBAUD (3): > > > mv88e61xx: refactor PHY and SWITCH level-code > > > kirkwood: make MPP arrays static const > > > ARM: lacie_kw: add support for WIRELESS_SPACE > > > > > > Holger Brunck (3): > > > arm/km: fix memory settings > > > km/common: drop unneeded std* environment variables > > > km/common: cosmetic change reported from checkpatch > > > > > > Luke Lowrey (1): > > > arch-kirkwood: Ethernet port macro returning incorrect address > > > > > > Michael Walle (1): > > > lsxl: unset ncip for rescue mode > > > > > > Valentin Longchamp (1): > > > arm/km: remove duplicate code > > > > > > andreas.devel at googlemail.com (1): > > > mv-common.h: increase malloc arena to 4MiB > > > > Is that last commit really supposed to be with Andreas Bie?mann's > > e-mail only, without his name? > > Hi Albert, > Sorry for the late reply, > Yes, it is with Andreas Bie?mann' email only, I wonder how his name is removed from this commit. > I will check and let you know. Ok - note that meanwhile, I have merged in TI and IMX. > Regards... > Prafulla . . . Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-01-08 17:21 ` Prafulla Wadaskar @ 2013-01-08 19:14 ` Albert ARIBAUD 2013-01-08 19:51 ` Albert ARIBAUD 2013-01-10 7:54 ` Albert ARIBAUD 1 sibling, 1 reply; 65+ messages in thread From: Albert ARIBAUD @ 2013-01-08 19:14 UTC (permalink / raw) To: u-boot Hi Prafulla, On Tue, 8 Jan 2013 09:21:40 -0800, Prafulla Wadaskar <prafulla@marvell.com> wrote: > Dear Albert > Please pull > > The following changes since commit 7528cf5f016b5b8b8b12b373f6f31a10bf89233d: > > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-01-08 14:59:37 +0100) > > are available in the git repository at: > > u-boot-marvell.git master branch. > > Albert ARIBAUD (3): > mv88e61xx: refactor PHY and SWITCH level-code > kirkwood: make MPP arrays static const > ARM: lacie_kw: add support for WIRELESS_SPACE > > Andreas Bie?mann (1): > mv-common.h: increase malloc arena to 4MiB > > Holger Brunck (3): > arm/km: fix memory settings > km/common: drop unneeded std* environment variables > km/common: cosmetic change reported from checkpatch > > Luke Lowrey (1): > arch-kirkwood: Ethernet port macro returning incorrect address > > Michael Walle (1): > lsxl: unset ncip for rescue mode > > Valentin Longchamp (1): > arm/km: remove duplicate code > > arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 2 +- > arch/arm/include/asm/arch-kirkwood/cpu.h | 2 +- > arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +- > board/LaCie/net2big_v2/net2big_v2.c | 2 +- > board/LaCie/netspace_v2/netspace_v2.c | 2 +- > board/LaCie/wireless_space/Makefile | 46 +++ > board/LaCie/wireless_space/kwbimage.cfg | 82 ++++ > board/LaCie/wireless_space/wireless_space.c | 176 ++++++++ > board/Marvell/dreamplug/dreamplug.c | 2 +- > board/Marvell/guruplug/guruplug.c | 2 +- > board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +- > board/Marvell/openrd/openrd.c | 2 +- > board/Marvell/rd6281a/rd6281a.c | 2 +- > board/Marvell/sheevaplug/sheevaplug.c | 2 +- > board/Seagate/dockstar/dockstar.c | 2 +- > board/buffalo/lsxl/lsxl.c | 7 +- > board/cloudengines/pogo_e02/pogo_e02.c | 2 +- > board/d-link/dns325/dns325.c | 2 +- > board/iomega/iconnect/iconnect.c | 2 +- > board/karo/tk71/tk71.c | 2 +- > board/keymile/common/common.c | 2 +- > board/keymile/km_arm/km_arm.c | 16 +- > board/keymile/km_arm/kwbimage-memphis.cfg | 6 +- > board/keymile/km_arm/kwbimage.cfg | 6 +- > board/keymile/km_arm/kwbimage_128M16_1.cfg | 25 +- > board/keymile/km_arm/kwbimage_256M8_1.cfg | 25 +- > board/raidsonic/ib62x0/ib62x0.c | 2 +- > boards.cfg | 1 + > drivers/net/phy/mv88e61xx.c | 495 ++++++++++++++-------- > drivers/net/phy/mv88e61xx.h | 39 ++- > drivers/spi/kirkwood_spi.c | 12 +- > include/configs/km/keymile-common.h | 3 - > include/configs/lsxl.h | 2 +- > include/configs/mv-common.h | 2 +- > include/configs/wireless_space.h | 194 +++++++++ > include/netdev.h | 21 +- > 36 files changed, 896 insertions(+), 298 deletions(-) > create mode 100644 board/LaCie/wireless_space/Makefile > create mode 100644 board/LaCie/wireless_space/kwbimage.cfg > create mode 100644 board/LaCie/wireless_space/wireless_space.c > create mode 100644 include/configs/wireless_space.h > > Regards... > Prafulla . . . > > ________________________________________ > From: Albert ARIBAUD [albert.u.boot at aribaud.net] > Sent: Tuesday, January 08, 2013 8:33 PM > To: Prafulla Wadaskar > Cc: 'u-boot at lists.denx.de'; Ashish Karkare; Prabhanjan Sarnaik; 'Wolfgang Denk'; Andreas Bie?mann > Subject: Re: Pull request for u-boot-marvell.git > > Hi Prafulla, > > On Mon, 7 Jan 2013 04:26:09 -0800, Prafulla Wadaskar > <prafulla@marvell.com> wrote: > > > > > > > -----Original Message----- > > > From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net] > > > Sent: 23 December 2012 20:40 > > > To: Prafulla Wadaskar > > > Cc: 'u-boot at lists.denx.de'; Ashish Karkare; Prabhanjan Sarnaik; > > > 'Wolfgang Denk'; Andreas Bie?mann > > > Subject: Re: Pull request for u-boot-marvell.git > > > > > > Hi Prafulla, > > > > > > On Thu, 20 Dec 2012 02:05:36 -0800, Prafulla Wadaskar > > > <prafulla@marvell.com> wrote: > > > > Dear Albert > > > > Please discard my earlier pull request and please pull > > > > The following changes since commit > > > b8a7c467960ffb4d5a5e1eef5f7783fb6f594542: > > > > Albert ARIBAUD (1): > > > > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' > > > > > > > > are available in the git repository at: > > > > > > > > u-boot-marvell.git master branch. > > > > > > > > Albert ARIBAUD (3): > > > > mv88e61xx: refactor PHY and SWITCH level-code > > > > kirkwood: make MPP arrays static const > > > > ARM: lacie_kw: add support for WIRELESS_SPACE > > > > > > > > Holger Brunck (3): > > > > arm/km: fix memory settings > > > > km/common: drop unneeded std* environment variables > > > > km/common: cosmetic change reported from checkpatch > > > > > > > > Luke Lowrey (1): > > > > arch-kirkwood: Ethernet port macro returning incorrect address > > > > > > > > Michael Walle (1): > > > > lsxl: unset ncip for rescue mode > > > > > > > > Valentin Longchamp (1): > > > > arm/km: remove duplicate code > > > > > > > > andreas.devel at googlemail.com (1): > > > > mv-common.h: increase malloc arena to 4MiB > > > > > > Is that last commit really supposed to be with Andreas Bie?mann's > > > e-mail only, without his name? > > > > Hi Albert, > > Sorry for the late reply, > > Yes, it is with Andreas Bie?mann' email only, I wonder how his name is removed from this commit. > > I will check and let you know. > > Ok - note that meanwhile, I have merged in TI and IMX. > > > Regards... > > Prafulla . . . > > Amicalement, > -- > Albert. Applied to u-boot-arm/master, thanks! Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-01-08 19:14 ` Albert ARIBAUD @ 2013-01-08 19:51 ` Albert ARIBAUD 0 siblings, 0 replies; 65+ messages in thread From: Albert ARIBAUD @ 2013-01-08 19:51 UTC (permalink / raw) To: u-boot On Tue, 8 Jan 2013 20:14:44 +0100, Albert ARIBAUD <albert.u.boot@aribaud.net> wrote: > Hi Prafulla, > > On Tue, 8 Jan 2013 09:21:40 -0800, Prafulla Wadaskar > <prafulla@marvell.com> wrote: > > > Dear Albert > > Please pull > > > > The following changes since commit 7528cf5f016b5b8b8b12b373f6f31a10bf89233d: > > > > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-01-08 14:59:37 +0100) > > > > are available in the git repository at: > > > > u-boot-marvell.git master branch. > > > > Albert ARIBAUD (3): > > mv88e61xx: refactor PHY and SWITCH level-code > > kirkwood: make MPP arrays static const > > ARM: lacie_kw: add support for WIRELESS_SPACE > > > > Andreas Bie?mann (1): > > mv-common.h: increase malloc arena to 4MiB > > > > Holger Brunck (3): > > arm/km: fix memory settings > > km/common: drop unneeded std* environment variables > > km/common: cosmetic change reported from checkpatch > > > > Luke Lowrey (1): > > arch-kirkwood: Ethernet port macro returning incorrect address > > > > Michael Walle (1): > > lsxl: unset ncip for rescue mode > > > > Valentin Longchamp (1): > > arm/km: remove duplicate code > > > > arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 2 +- > > arch/arm/include/asm/arch-kirkwood/cpu.h | 2 +- > > arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +- > > board/LaCie/net2big_v2/net2big_v2.c | 2 +- > > board/LaCie/netspace_v2/netspace_v2.c | 2 +- > > board/LaCie/wireless_space/Makefile | 46 +++ > > board/LaCie/wireless_space/kwbimage.cfg | 82 ++++ > > board/LaCie/wireless_space/wireless_space.c | 176 ++++++++ > > board/Marvell/dreamplug/dreamplug.c | 2 +- > > board/Marvell/guruplug/guruplug.c | 2 +- > > board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +- > > board/Marvell/openrd/openrd.c | 2 +- > > board/Marvell/rd6281a/rd6281a.c | 2 +- > > board/Marvell/sheevaplug/sheevaplug.c | 2 +- > > board/Seagate/dockstar/dockstar.c | 2 +- > > board/buffalo/lsxl/lsxl.c | 7 +- > > board/cloudengines/pogo_e02/pogo_e02.c | 2 +- > > board/d-link/dns325/dns325.c | 2 +- > > board/iomega/iconnect/iconnect.c | 2 +- > > board/karo/tk71/tk71.c | 2 +- > > board/keymile/common/common.c | 2 +- > > board/keymile/km_arm/km_arm.c | 16 +- > > board/keymile/km_arm/kwbimage-memphis.cfg | 6 +- > > board/keymile/km_arm/kwbimage.cfg | 6 +- > > board/keymile/km_arm/kwbimage_128M16_1.cfg | 25 +- > > board/keymile/km_arm/kwbimage_256M8_1.cfg | 25 +- > > board/raidsonic/ib62x0/ib62x0.c | 2 +- > > boards.cfg | 1 + > > drivers/net/phy/mv88e61xx.c | 495 ++++++++++++++-------- > > drivers/net/phy/mv88e61xx.h | 39 ++- > > drivers/spi/kirkwood_spi.c | 12 +- > > include/configs/km/keymile-common.h | 3 - > > include/configs/lsxl.h | 2 +- > > include/configs/mv-common.h | 2 +- > > include/configs/wireless_space.h | 194 +++++++++ > > include/netdev.h | 21 +- > > 36 files changed, 896 insertions(+), 298 deletions(-) > > create mode 100644 board/LaCie/wireless_space/Makefile > > create mode 100644 board/LaCie/wireless_space/kwbimage.cfg > > create mode 100644 board/LaCie/wireless_space/wireless_space.c > > create mode 100644 include/configs/wireless_space.h > > > > Regards... > > Prafulla . . . > > > > ________________________________________ > > From: Albert ARIBAUD [albert.u.boot at aribaud.net] > > Sent: Tuesday, January 08, 2013 8:33 PM > > To: Prafulla Wadaskar > > Cc: 'u-boot at lists.denx.de'; Ashish Karkare; Prabhanjan Sarnaik; 'Wolfgang Denk'; Andreas Bie?mann > > Subject: Re: Pull request for u-boot-marvell.git > > > > Hi Prafulla, > > > > On Mon, 7 Jan 2013 04:26:09 -0800, Prafulla Wadaskar > > <prafulla@marvell.com> wrote: > > > > > > > > > > -----Original Message----- > > > > From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net] > > > > Sent: 23 December 2012 20:40 > > > > To: Prafulla Wadaskar > > > > Cc: 'u-boot at lists.denx.de'; Ashish Karkare; Prabhanjan Sarnaik; > > > > 'Wolfgang Denk'; Andreas Bie?mann > > > > Subject: Re: Pull request for u-boot-marvell.git > > > > > > > > Hi Prafulla, > > > > > > > > On Thu, 20 Dec 2012 02:05:36 -0800, Prafulla Wadaskar > > > > <prafulla@marvell.com> wrote: > > > > > Dear Albert > > > > > Please discard my earlier pull request and please pull > > > > > The following changes since commit > > > > b8a7c467960ffb4d5a5e1eef5f7783fb6f594542: > > > > > Albert ARIBAUD (1): > > > > > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' > > > > > > > > > > are available in the git repository at: > > > > > > > > > > u-boot-marvell.git master branch. > > > > > > > > > > Albert ARIBAUD (3): > > > > > mv88e61xx: refactor PHY and SWITCH level-code > > > > > kirkwood: make MPP arrays static const > > > > > ARM: lacie_kw: add support for WIRELESS_SPACE > > > > > > > > > > Holger Brunck (3): > > > > > arm/km: fix memory settings > > > > > km/common: drop unneeded std* environment variables > > > > > km/common: cosmetic change reported from checkpatch > > > > > > > > > > Luke Lowrey (1): > > > > > arch-kirkwood: Ethernet port macro returning incorrect address > > > > > > > > > > Michael Walle (1): > > > > > lsxl: unset ncip for rescue mode > > > > > > > > > > Valentin Longchamp (1): > > > > > arm/km: remove duplicate code > > > > > > > > > > andreas.devel at googlemail.com (1): > > > > > mv-common.h: increase malloc arena to 4MiB > > > > > > > > Is that last commit really supposed to be with Andreas Bie?mann's > > > > e-mail only, without his name? > > > > > > Hi Albert, > > > Sorry for the late reply, > > > Yes, it is with Andreas Bie?mann' email only, I wonder how his name is removed from this commit. > > > I will check and let you know. > > > > Ok - note that meanwhile, I have merged in TI and IMX. > > > > > Regards... > > > Prafulla . . . > > > > Amicalement, > > -- > > Albert. > > Applied to u-boot-arm/master, thanks! Actually I'll have to revert ARM and re-apply Marvell once I fix the CRT0 patch; no need to re-send a pull req, though. Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-01-08 17:21 ` Prafulla Wadaskar 2013-01-08 19:14 ` Albert ARIBAUD @ 2013-01-10 7:54 ` Albert ARIBAUD 1 sibling, 0 replies; 65+ messages in thread From: Albert ARIBAUD @ 2013-01-10 7:54 UTC (permalink / raw) To: u-boot Hi Prafulla, On Tue, 8 Jan 2013 09:21:40 -0800, Prafulla Wadaskar <prafulla@marvell.com> wrote: > Dear Albert > Please pull > > The following changes since commit 7528cf5f016b5b8b8b12b373f6f31a10bf89233d: > > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-01-08 14:59:37 +0100) > > are available in the git repository at: > > u-boot-marvell.git master branch. > > Albert ARIBAUD (3): > mv88e61xx: refactor PHY and SWITCH level-code > kirkwood: make MPP arrays static const > ARM: lacie_kw: add support for WIRELESS_SPACE > > Andreas Bie?mann (1): > mv-common.h: increase malloc arena to 4MiB > > Holger Brunck (3): > arm/km: fix memory settings > km/common: drop unneeded std* environment variables > km/common: cosmetic change reported from checkpatch > > Luke Lowrey (1): > arch-kirkwood: Ethernet port macro returning incorrect address > > Michael Walle (1): > lsxl: unset ncip for rescue mode > > Valentin Longchamp (1): > arm/km: remove duplicate code > > arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 2 +- > arch/arm/include/asm/arch-kirkwood/cpu.h | 2 +- > arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +- > board/LaCie/net2big_v2/net2big_v2.c | 2 +- > board/LaCie/netspace_v2/netspace_v2.c | 2 +- > board/LaCie/wireless_space/Makefile | 46 +++ > board/LaCie/wireless_space/kwbimage.cfg | 82 ++++ > board/LaCie/wireless_space/wireless_space.c | 176 ++++++++ > board/Marvell/dreamplug/dreamplug.c | 2 +- > board/Marvell/guruplug/guruplug.c | 2 +- > board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +- > board/Marvell/openrd/openrd.c | 2 +- > board/Marvell/rd6281a/rd6281a.c | 2 +- > board/Marvell/sheevaplug/sheevaplug.c | 2 +- > board/Seagate/dockstar/dockstar.c | 2 +- > board/buffalo/lsxl/lsxl.c | 7 +- > board/cloudengines/pogo_e02/pogo_e02.c | 2 +- > board/d-link/dns325/dns325.c | 2 +- > board/iomega/iconnect/iconnect.c | 2 +- > board/karo/tk71/tk71.c | 2 +- > board/keymile/common/common.c | 2 +- > board/keymile/km_arm/km_arm.c | 16 +- > board/keymile/km_arm/kwbimage-memphis.cfg | 6 +- > board/keymile/km_arm/kwbimage.cfg | 6 +- > board/keymile/km_arm/kwbimage_128M16_1.cfg | 25 +- > board/keymile/km_arm/kwbimage_256M8_1.cfg | 25 +- > board/raidsonic/ib62x0/ib62x0.c | 2 +- > boards.cfg | 1 + > drivers/net/phy/mv88e61xx.c | 495 ++++++++++++++-------- > drivers/net/phy/mv88e61xx.h | 39 ++- > drivers/spi/kirkwood_spi.c | 12 +- > include/configs/km/keymile-common.h | 3 - > include/configs/lsxl.h | 2 +- > include/configs/mv-common.h | 2 +- > include/configs/wireless_space.h | 194 +++++++++ > include/netdev.h | 21 +- > 36 files changed, 896 insertions(+), 298 deletions(-) > create mode 100644 board/LaCie/wireless_space/Makefile > create mode 100644 board/LaCie/wireless_space/kwbimage.cfg > create mode 100644 board/LaCie/wireless_space/wireless_space.c > create mode 100644 include/configs/wireless_space.h > > Regards... > Prafulla . . . > > ________________________________________ > From: Albert ARIBAUD [albert.u.boot at aribaud.net] > Sent: Tuesday, January 08, 2013 8:33 PM > To: Prafulla Wadaskar > Cc: 'u-boot at lists.denx.de'; Ashish Karkare; Prabhanjan Sarnaik; 'Wolfgang Denk'; Andreas Bie?mann > Subject: Re: Pull request for u-boot-marvell.git > > Hi Prafulla, > > On Mon, 7 Jan 2013 04:26:09 -0800, Prafulla Wadaskar > <prafulla@marvell.com> wrote: > > > > > > > -----Original Message----- > > > From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net] > > > Sent: 23 December 2012 20:40 > > > To: Prafulla Wadaskar > > > Cc: 'u-boot at lists.denx.de'; Ashish Karkare; Prabhanjan Sarnaik; > > > 'Wolfgang Denk'; Andreas Bie?mann > > > Subject: Re: Pull request for u-boot-marvell.git > > > > > > Hi Prafulla, > > > > > > On Thu, 20 Dec 2012 02:05:36 -0800, Prafulla Wadaskar > > > <prafulla@marvell.com> wrote: > > > > Dear Albert > > > > Please discard my earlier pull request and please pull > > > > The following changes since commit > > > b8a7c467960ffb4d5a5e1eef5f7783fb6f594542: > > > > Albert ARIBAUD (1): > > > > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' > > > > > > > > are available in the git repository at: > > > > > > > > u-boot-marvell.git master branch. > > > > > > > > Albert ARIBAUD (3): > > > > mv88e61xx: refactor PHY and SWITCH level-code > > > > kirkwood: make MPP arrays static const > > > > ARM: lacie_kw: add support for WIRELESS_SPACE > > > > > > > > Holger Brunck (3): > > > > arm/km: fix memory settings > > > > km/common: drop unneeded std* environment variables > > > > km/common: cosmetic change reported from checkpatch > > > > > > > > Luke Lowrey (1): > > > > arch-kirkwood: Ethernet port macro returning incorrect address > > > > > > > > Michael Walle (1): > > > > lsxl: unset ncip for rescue mode > > > > > > > > Valentin Longchamp (1): > > > > arm/km: remove duplicate code > > > > > > > > andreas.devel at googlemail.com (1): > > > > mv-common.h: increase malloc arena to 4MiB > > > > > > Is that last commit really supposed to be with Andreas Bie?mann's > > > e-mail only, without his name? > > > > Hi Albert, > > Sorry for the late reply, > > Yes, it is with Andreas Bie?mann' email only, I wonder how his name is removed from this commit. > > I will check and let you know. > > Ok - note that meanwhile, I have merged in TI and IMX. > > > Regards... > > Prafulla . . . > > Amicalement, > -- > Albert. Applied *again* to u-boot-arm/master, thanks! Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
[parent not found: <DCB55AE5D43FB64FA6D3F5573FA2D42B1A3B957247@SC-VEXCH4.marvell.com>]
* [U-Boot] Pull request for u-boot-marvell.git [not found] ` <DCB55AE5D43FB64FA6D3F5573FA2D42B1A3B957247@SC-VEXCH4.marvell.com> @ 2013-04-12 13:54 ` Prafulla Wadaskar 2013-04-12 15:12 ` Albert ARIBAUD 2013-06-20 5:38 ` Prafulla Wadaskar ` (2 subsequent siblings) 3 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2013-04-12 13:54 UTC (permalink / raw) To: u-boot Hi Albert, Please pull The following changes since commit c97b6df1ae92679d67f94c1cfef51323782a506d: Albert ARIBAUD (1): Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' are available in the git repository at: u-boot-marvell.git master branch. Gerlando Falauto (1): kirkwood_nand: allow usage of NAND_ECC_SOFT_BCH Holger Brunck (3): arm/km: rename BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT arm/km: use CONFIG_NAND_ECC_BCH arm/km: add support for kmsuv31 board boards.cfg | 1 + drivers/mtd/nand/kirkwood_nand.c | 4 ++++ include/configs/km/km_arm.h | 5 ++++- include/configs/km_kirkwood.h | 8 ++++++++ 4 files changed, 17 insertions(+), 1 deletions(-) Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-04-12 13:54 ` Prafulla Wadaskar @ 2013-04-12 15:12 ` Albert ARIBAUD 0 siblings, 0 replies; 65+ messages in thread From: Albert ARIBAUD @ 2013-04-12 15:12 UTC (permalink / raw) To: u-boot Hi Prafulla, On Fri, 12 Apr 2013 06:54:51 -0700, Prafulla Wadaskar <prafulla@marvell.com> wrote: > Hi Albert, > Please pull > The following changes since commit c97b6df1ae92679d67f94c1cfef51323782a506d: > Albert ARIBAUD (1): > Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' > > are available in the git repository at: > > u-boot-marvell.git master branch. > > Gerlando Falauto (1): > kirkwood_nand: allow usage of NAND_ECC_SOFT_BCH > > Holger Brunck (3): > arm/km: rename BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT > arm/km: use CONFIG_NAND_ECC_BCH > arm/km: add support for kmsuv31 board > > boards.cfg | 1 + > drivers/mtd/nand/kirkwood_nand.c | 4 ++++ > include/configs/km/km_arm.h | 5 ++++- > include/configs/km_kirkwood.h | 8 ++++++++ > 4 files changed, 17 insertions(+), 1 deletions(-) > > Regards... > Prafulla . . . Applied to u-boot-arm/master, thanks! Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git [not found] ` <DCB55AE5D43FB64FA6D3F5573FA2D42B1A3B957247@SC-VEXCH4.marvell.com> 2013-04-12 13:54 ` Prafulla Wadaskar @ 2013-06-20 5:38 ` Prafulla Wadaskar 2013-06-20 8:44 ` Albert ARIBAUD 2013-09-25 11:20 ` Prafulla Wadaskar 2014-01-06 12:38 ` Prafulla Wadaskar 3 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2013-06-20 5:38 UTC (permalink / raw) To: u-boot The following changes since commit c2543a21df335484fa86bd652b5564d0ca90d5f6: Albert ARIBAUD (1): Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' are available in the git repository at: u-boot-marvell.git master branch. Simon Guinot (3): net2big_v2: initialize I2C fan at startup LaCie/common: add support for the CPLD GPIO bus net2big_v2: initialize LEDs at startup board/LaCie/common/cpld-gpio-bus.c | 50 +++++++++++ board/LaCie/common/cpld-gpio-bus.h | 24 ++++++ board/LaCie/net2big_v2/Makefile | 3 + board/LaCie/net2big_v2/net2big_v2.c | 154 +++++++++++++++++++++++++++++++++-- board/LaCie/net2big_v2/net2big_v2.h | 5 + include/configs/lacie_kw.h | 9 ++- 6 files changed, 236 insertions(+), 9 deletions(-) create mode 100644 board/LaCie/common/cpld-gpio-bus.c create mode 100644 board/LaCie/common/cpld-gpio-bus. Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-06-20 5:38 ` Prafulla Wadaskar @ 2013-06-20 8:44 ` Albert ARIBAUD 0 siblings, 0 replies; 65+ messages in thread From: Albert ARIBAUD @ 2013-06-20 8:44 UTC (permalink / raw) To: u-boot Hi Prafulla, On Wed, 19 Jun 2013 22:38:17 -0700, Prafulla Wadaskar <prafulla@marvell.com> wrote: > The following changes since commit c2543a21df335484fa86bd652b5564d0ca90d5f6: > Albert ARIBAUD (1): > Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' > > are available in the git repository at: > > u-boot-marvell.git master branch. > > Simon Guinot (3): > net2big_v2: initialize I2C fan at startup > LaCie/common: add support for the CPLD GPIO bus > net2big_v2: initialize LEDs at startup > > board/LaCie/common/cpld-gpio-bus.c | 50 +++++++++++ > board/LaCie/common/cpld-gpio-bus.h | 24 ++++++ > board/LaCie/net2big_v2/Makefile | 3 + > board/LaCie/net2big_v2/net2big_v2.c | 154 +++++++++++++++++++++++++++++++++-- > board/LaCie/net2big_v2/net2big_v2.h | 5 + > include/configs/lacie_kw.h | 9 ++- > 6 files changed, 236 insertions(+), 9 deletions(-) > create mode 100644 board/LaCie/common/cpld-gpio-bus.c > create mode 100644 board/LaCie/common/cpld-gpio-bus. > > Regards... > Prafulla . . . Applied to u-boot-arm/master, thanks! Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git [not found] ` <DCB55AE5D43FB64FA6D3F5573FA2D42B1A3B957247@SC-VEXCH4.marvell.com> 2013-04-12 13:54 ` Prafulla Wadaskar 2013-06-20 5:38 ` Prafulla Wadaskar @ 2013-09-25 11:20 ` Prafulla Wadaskar 2013-10-02 12:51 ` Albert ARIBAUD 2014-01-06 12:38 ` Prafulla Wadaskar 3 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2013-09-25 11:20 UTC (permalink / raw) To: u-boot Hi Albert, Please kindly pull The following changes since commit 12eba1b49380988fd87cc0b3af44014cca8b71c4: Jeroen Hofstee (1): README: update ARM register usage are available in the git repository at: u-boot-marvell.git master branch. Holger Brunck (2): arm/km: drop unneeded define arm/km: make local function startup_allowed static Karlheinz Jerg (1): arm/km: add support for km_kirkwood_128m16 board board/keymile/km_arm/km_arm.c | 6 +----- boards.cfg | 1 + include/configs/km_kirkwood.h | 10 ++++++++++ 3 files changed, 12 insertions(+), 5 deletions(-) Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-09-25 11:20 ` Prafulla Wadaskar @ 2013-10-02 12:51 ` Albert ARIBAUD 2013-10-07 7:18 ` Holger Brunck 0 siblings, 1 reply; 65+ messages in thread From: Albert ARIBAUD @ 2013-10-02 12:51 UTC (permalink / raw) To: u-boot Hi Prafulla, On Wed, 25 Sep 2013 04:20:24 -0700, Prafulla Wadaskar <prafulla@marvell.com> wrote: > Hi Albert, > Please kindly pull > The following changes since commit 12eba1b49380988fd87cc0b3af44014cca8b71c4: > Jeroen Hofstee (1): > README: update ARM register usage > > are available in the git repository at: > > u-boot-marvell.git master branch. > > Holger Brunck (2): > arm/km: drop unneeded define > arm/km: make local function startup_allowed static > > Karlheinz Jerg (1): > arm/km: add support for km_kirkwood_128m16 board > > board/keymile/km_arm/km_arm.c | 6 +----- > boards.cfg | 1 + > include/configs/km_kirkwood.h | 10 ++++++++++ > 3 files changed, 12 insertions(+), 5 deletions(-) > > Regards... > Prafulla . . . For km_kirkwood_128m16: ../common/ivm.c: In function 'ivm_read_eeprom': ../common/ivm.c:304:18: error: 'CONFIG_KM_IVM_BUS' undeclared (first use in this function) ../common/ivm.c:304:18: note: each undeclared identifier is reported only once for each function it appears in make[1]: *** [/home/albert/src/u-boot-arm/build/km_kirkwood_128m16/board/keymile/km_arm/../common/ivm.o] Error 1 make: *** [/home/albert/src/u-boot-arm/build/km_kirkwood_128m16/board/keymile/km_arm/libkm_arm.o] Error 2 Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-10-02 12:51 ` Albert ARIBAUD @ 2013-10-07 7:18 ` Holger Brunck 2013-10-07 12:58 ` Prafulla Wadaskar 0 siblings, 1 reply; 65+ messages in thread From: Holger Brunck @ 2013-10-07 7:18 UTC (permalink / raw) To: u-boot Hi, On 10/02/2013 02:51 PM, Albert ARIBAUD wrote: > Hi Prafulla, > > On Wed, 25 Sep 2013 04:20:24 -0700, Prafulla Wadaskar > <prafulla@marvell.com> wrote: > >> Hi Albert, >> Please kindly pull >> The following changes since commit 12eba1b49380988fd87cc0b3af44014cca8b71c4: >> Jeroen Hofstee (1): >> README: update ARM register usage >> >> are available in the git repository at: >> >> u-boot-marvell.git master branch. >> >> Holger Brunck (2): >> arm/km: drop unneeded define >> arm/km: make local function startup_allowed static >> >> Karlheinz Jerg (1): >> arm/km: add support for km_kirkwood_128m16 board >> >> board/keymile/km_arm/km_arm.c | 6 +----- >> boards.cfg | 1 + >> include/configs/km_kirkwood.h | 10 ++++++++++ >> 3 files changed, 12 insertions(+), 5 deletions(-) >> >> Regards... >> Prafulla . . . > > For km_kirkwood_128m16: > > ../common/ivm.c: In function 'ivm_read_eeprom': > ../common/ivm.c:304:18: error: 'CONFIG_KM_IVM_BUS' undeclared (first > use in this function) ../common/ivm.c:304:18: note: each undeclared > identifier is reported only once for each function it appears in > make[1]: *** > [/home/albert/src/u-boot-arm/build/km_kirkwood_128m16/board/keymile/km_arm/../common/ivm.o] > Error 1 make: *** > [/home/albert/src/u-boot-arm/build/km_kirkwood_128m16/board/keymile/km_arm/libkm_arm.o] > Error 2 ok there is some interdependency with Heikos i2c mux rework. Prafulla should I send a patch on top of your branch which fixes this or should I send a v3 of the whole patch? Regards Holger ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-10-07 7:18 ` Holger Brunck @ 2013-10-07 12:58 ` Prafulla Wadaskar 2013-10-10 17:06 ` Holger Brunck 0 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2013-10-07 12:58 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: Holger Brunck [mailto:holger.brunck at keymile.com] > Sent: 07 October 2013 12:48 > To: Prafulla Wadaskar > Cc: Albert ARIBAUD; 'u-boot at lists.denx.de'; Manas > Saksena > Subject: Re: Pull request for u-boot-marvell.git > > Hi, > > On 10/02/2013 02:51 PM, Albert ARIBAUD wrote: > > Hi Prafulla, > > > > On Wed, 25 Sep 2013 04:20:24 -0700, Prafulla Wadaskar > > <prafulla@marvell.com> wrote: > > > >> Hi Albert, > >> Please kindly pull > >> The following changes since commit > 12eba1b49380988fd87cc0b3af44014cca8b71c4: > >> Jeroen Hofstee (1): > >> README: update ARM register usage > >> > >> are available in the git repository at: > >> > >> u-boot-marvell.git master branch. > >> > >> Holger Brunck (2): > >> arm/km: drop unneeded define > >> arm/km: make local function startup_allowed > static > >> > >> Karlheinz Jerg (1): > >> arm/km: add support for km_kirkwood_128m16 > board > >> > >> board/keymile/km_arm/km_arm.c | 6 +----- > >> boards.cfg | 1 + > >> include/configs/km_kirkwood.h | 10 ++++++++++ > >> 3 files changed, 12 insertions(+), 5 deletions(-) > >> > >> Regards... > >> Prafulla . . . > > > > For km_kirkwood_128m16: > > > > ../common/ivm.c: In function 'ivm_read_eeprom': > > ../common/ivm.c:304:18: error: 'CONFIG_KM_IVM_BUS' > undeclared (first > > use in this function) ../common/ivm.c:304:18: note: > each undeclared > > identifier is reported only once for each function it > appears in > > make[1]: *** > > [/home/albert/src/u-boot- > arm/build/km_kirkwood_128m16/board/keymile/km_arm/../co > mmon/ivm.o] > > Error 1 make: *** > > [/home/albert/src/u-boot- > arm/build/km_kirkwood_128m16/board/keymile/km_arm/libkm > _arm.o] > > Error 2 > > ok there is some interdependency with Heikos i2c mux > rework. > > Prafulla should I send a patch on top of your branch > which fixes this or should > I send a v3 of the whole patch? Please send the patch to fix this issue on the top of branch. Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-10-07 12:58 ` Prafulla Wadaskar @ 2013-10-10 17:06 ` Holger Brunck 2013-10-14 10:46 ` Prafulla Wadaskar 2013-11-28 13:01 ` Holger Brunck 0 siblings, 2 replies; 65+ messages in thread From: Holger Brunck @ 2013-10-10 17:06 UTC (permalink / raw) To: u-boot On 10/07/2013 02:58 PM, Prafulla Wadaskar wrote: > > >> -----Original Message----- >> From: Holger Brunck [mailto:holger.brunck at keymile.com] >> Sent: 07 October 2013 12:48 >> To: Prafulla Wadaskar >> Cc: Albert ARIBAUD; 'u-boot at lists.denx.de'; Manas >> Saksena >> Subject: Re: Pull request for u-boot-marvell.git >> >> Hi, >> >> On 10/02/2013 02:51 PM, Albert ARIBAUD wrote: >>> Hi Prafulla, >>> >>> On Wed, 25 Sep 2013 04:20:24 -0700, Prafulla Wadaskar >>> <prafulla@marvell.com> wrote: >>> >>>> Hi Albert, >>>> Please kindly pull >>>> The following changes since commit >> 12eba1b49380988fd87cc0b3af44014cca8b71c4: >>>> Jeroen Hofstee (1): >>>> README: update ARM register usage >>>> >>>> are available in the git repository at: >>>> >>>> u-boot-marvell.git master branch. >>>> >>>> Holger Brunck (2): >>>> arm/km: drop unneeded define >>>> arm/km: make local function startup_allowed >> static >>>> >>>> Karlheinz Jerg (1): >>>> arm/km: add support for km_kirkwood_128m16 >> board >>>> >>>> board/keymile/km_arm/km_arm.c | 6 +----- >>>> boards.cfg | 1 + >>>> include/configs/km_kirkwood.h | 10 ++++++++++ >>>> 3 files changed, 12 insertions(+), 5 deletions(-) >>>> >>>> Regards... >>>> Prafulla . . . >>> >>> For km_kirkwood_128m16: >>> >>> ../common/ivm.c: In function 'ivm_read_eeprom': >>> ../common/ivm.c:304:18: error: 'CONFIG_KM_IVM_BUS' >> undeclared (first >>> use in this function) ../common/ivm.c:304:18: note: >> each undeclared >>> identifier is reported only once for each function it >> appears in >>> make[1]: *** >>> [/home/albert/src/u-boot- >> arm/build/km_kirkwood_128m16/board/keymile/km_arm/../co >> mmon/ivm.o] >>> Error 1 make: *** >>> [/home/albert/src/u-boot- >> arm/build/km_kirkwood_128m16/board/keymile/km_arm/libkm >> _arm.o] >>> Error 2 >> >> ok there is some interdependency with Heikos i2c mux >> rework. >> >> Prafulla should I send a patch on top of your branch >> which fixes this or should >> I send a v3 of the whole patch? > > Please send the patch to fix this issue on the top of branch. > done three days ago. So could you please pick it up and send Albert a new pull request? Thanks! Holger ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-10-10 17:06 ` Holger Brunck @ 2013-10-14 10:46 ` Prafulla Wadaskar 2013-11-28 13:01 ` Holger Brunck 1 sibling, 0 replies; 65+ messages in thread From: Prafulla Wadaskar @ 2013-10-14 10:46 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: Holger Brunck [mailto:holger.brunck at keymile.com] > Sent: 10 October 2013 22:37 > To: Prafulla Wadaskar > Cc: Albert ARIBAUD; 'u-boot at lists.denx.de'; Manas > Saksena > Subject: Re: Pull request for u-boot-marvell.git > > On 10/07/2013 02:58 PM, Prafulla Wadaskar wrote: > > > > > >> -----Original Message----- > >> From: Holger Brunck > [mailto:holger.brunck at keymile.com] > >> Sent: 07 October 2013 12:48 > >> To: Prafulla Wadaskar > >> Cc: Albert ARIBAUD; 'u-boot at lists.denx.de'; Manas > >> Saksena > >> Subject: Re: Pull request for u-boot-marvell.git > >> > >> Hi, > >> > >> On 10/02/2013 02:51 PM, Albert ARIBAUD wrote: > >>> Hi Prafulla, > >>> > >>> On Wed, 25 Sep 2013 04:20:24 -0700, Prafulla > Wadaskar > >>> <prafulla@marvell.com> wrote: > >>> > >>>> Hi Albert, > >>>> Please kindly pull > >>>> The following changes since commit > >> 12eba1b49380988fd87cc0b3af44014cca8b71c4: > >>>> Jeroen Hofstee (1): > >>>> README: update ARM register usage > >>>> > >>>> are available in the git repository at: > >>>> > >>>> u-boot-marvell.git master branch. > >>>> > >>>> Holger Brunck (2): > >>>> arm/km: drop unneeded define > >>>> arm/km: make local function startup_allowed > >> static > >>>> > >>>> Karlheinz Jerg (1): > >>>> arm/km: add support for km_kirkwood_128m16 > >> board > >>>> > >>>> board/keymile/km_arm/km_arm.c | 6 +----- > >>>> boards.cfg | 1 + > >>>> include/configs/km_kirkwood.h | 10 ++++++++++ > >>>> 3 files changed, 12 insertions(+), 5 deletions(-) > >>>> > >>>> Regards... > >>>> Prafulla . . . > >>> > >>> For km_kirkwood_128m16: > >>> > >>> ../common/ivm.c: In function 'ivm_read_eeprom': > >>> ../common/ivm.c:304:18: error: 'CONFIG_KM_IVM_BUS' > >> undeclared (first > >>> use in this function) ../common/ivm.c:304:18: note: > >> each undeclared > >>> identifier is reported only once for each function > it > >> appears in > >>> make[1]: *** > >>> [/home/albert/src/u-boot- > >> > arm/build/km_kirkwood_128m16/board/keymile/km_arm/../co > >> mmon/ivm.o] > >>> Error 1 make: *** > >>> [/home/albert/src/u-boot- > >> > arm/build/km_kirkwood_128m16/board/keymile/km_arm/libkm > >> _arm.o] > >>> Error 2 > >> > >> ok there is some interdependency with Heikos i2c mux > >> rework. > >> > >> Prafulla should I send a patch on top of your branch > >> which fixes this or should > >> I send a v3 of the whole patch? > > > > Please send the patch to fix this issue on the top of > branch. > > > > done three days ago. So could you please pick it up and > send Albert a new pull > request? Surely I will be doing the same. Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-10-10 17:06 ` Holger Brunck 2013-10-14 10:46 ` Prafulla Wadaskar @ 2013-11-28 13:01 ` Holger Brunck 2013-11-29 3:32 ` Prafulla Wadaskar 1 sibling, 1 reply; 65+ messages in thread From: Holger Brunck @ 2013-11-28 13:01 UTC (permalink / raw) To: u-boot On 10/10/2013 07:06 PM, Holger Brunck wrote: >>> >>> Prafulla should I send a patch on top of your branch >>> which fixes this or should >>> I send a v3 of the whole patch? >> >> Please send the patch to fix this issue on the top of branch. >> > > done three days ago. So could you please pick it up and send Albert a new pull > request? > so we missed v2013.10. Any chance to pull them now for v2014.01? Regards Holger ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-11-28 13:01 ` Holger Brunck @ 2013-11-29 3:32 ` Prafulla Wadaskar 2013-12-01 16:00 ` Luka Perkov 0 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2013-11-29 3:32 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: Holger Brunck [mailto:holger.brunck at keymile.com] > Sent: 28 November 2013 05:01 > To: Prafulla Wadaskar > Cc: Manas Saksena; 'u-boot at lists.denx.de'; > albert.u.boot at aribaud.net > Subject: Re: Pull request for u-boot-marvell.git > > On 10/10/2013 07:06 PM, Holger Brunck wrote: > >>> > >>> Prafulla should I send a patch on top of your > branch > >>> which fixes this or should > >>> I send a v3 of the whole patch? > >> > >> Please send the patch to fix this issue on the top > of branch. > >> > > > > done three days ago. So could you please pick it up > and send Albert a new pull > > request? > > > > so we missed v2013.10. Any chance to pull them now for > v2014.01? I am sorry about that. I will send new pull request for this. Regards... Prafulla . . . > > Regards > Holger ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2013-11-29 3:32 ` Prafulla Wadaskar @ 2013-12-01 16:00 ` Luka Perkov 0 siblings, 0 replies; 65+ messages in thread From: Luka Perkov @ 2013-12-01 16:00 UTC (permalink / raw) To: u-boot Hi Prafulla, On Thu, Nov 28, 2013 at 07:32:35PM -0800, Prafulla Wadaskar wrote: > > so we missed v2013.10. Any chance to pull them now for > > v2014.01? > > I am sorry about that. > I will send new pull request for this. Can you please take this one too: http://patchwork.ozlabs.org/patch/287388/ Thanks! Luka ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git [not found] ` <DCB55AE5D43FB64FA6D3F5573FA2D42B1A3B957247@SC-VEXCH4.marvell.com> ` (2 preceding siblings ...) 2013-09-25 11:20 ` Prafulla Wadaskar @ 2014-01-06 12:38 ` Prafulla Wadaskar 2014-01-08 16:00 ` Albert ARIBAUD 3 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2014-01-06 12:38 UTC (permalink / raw) To: u-boot Hi Albert, Please pull The following changes since commit 4b0561d84198f8d696fd51cfc27aeac8c7482a8c: Albert ARIBAUD (1): Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' are available in the git repository at: u-boot-marvell.git master branch. Holger Brunck (1): arm/km: fix i2c mux define for km_kirkwood_128m16 target Karlheinz Jerg (1): arm/km: add support for km_kirkwood_128m16 board Luka Perkov (1): kirkwood: ib62x0: use device tree and update config boards.cfg | 1 + include/configs/ib62x0.h | 38 +++++++++++++++++++++++--------------- include/configs/km_kirkwood.h | 10 ++++++++++ 3 files changed, 34 insertions(+), 15 deletions(-) Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2014-01-06 12:38 ` Prafulla Wadaskar @ 2014-01-08 16:00 ` Albert ARIBAUD 2014-10-06 13:22 ` Prafulla Wadaskar 0 siblings, 1 reply; 65+ messages in thread From: Albert ARIBAUD @ 2014-01-08 16:00 UTC (permalink / raw) To: u-boot Hi Prafulla, On Mon, 6 Jan 2014 04:38:43 -0800, Prafulla Wadaskar <prafulla@marvell.com> wrote: > Hi Albert, > > Please pull > The following changes since commit 4b0561d84198f8d696fd51cfc27aeac8c7482a8c: > Albert ARIBAUD (1): > Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' > > are available in the git repository at: > > u-boot-marvell.git master branch. > > Holger Brunck (1): > arm/km: fix i2c mux define for km_kirkwood_128m16 target > > Karlheinz Jerg (1): > arm/km: add support for km_kirkwood_128m16 board > > Luka Perkov (1): > kirkwood: ib62x0: use device tree and update config > > boards.cfg | 1 + > include/configs/ib62x0.h | 38 +++++++++++++++++++++++--------------- > include/configs/km_kirkwood.h | 10 ++++++++++ > 3 files changed, 34 insertions(+), 15 deletions(-) > > Regards... > Prafulla . . . Applied to u-boot-arm/master, thanks! Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2014-01-08 16:00 ` Albert ARIBAUD @ 2014-10-06 13:22 ` Prafulla Wadaskar 2014-10-08 19:06 ` Albert ARIBAUD 0 siblings, 1 reply; 65+ messages in thread From: Prafulla Wadaskar @ 2014-10-06 13:22 UTC (permalink / raw) To: u-boot Hi Albert, Please pull The following changes since commit be9f643ae6aa9044c60fe80e3a2c10be8371c692: Merge branch 'for-tom' of git://git.denx.de/u-boot-dm (2014-09-26 20:10:48 -0400) are available in the git repository at: git://git.denx.de/u-boot-marvell.git master DrEagle (5): ARM: sheevaplug: change env location ARM: sheevaplug: add MVSATA driver ARM: sheevaplug: add MTD defaults ARM: sheevaplug: redefine MTDPARTS ARM: sheevaplug: add HUSH parser Michael Walle (1): lsxl: convert to generic board and fix typo include/configs/lsxl.h | 4 ++- include/configs/sheevaplug.h | 46 +++++++++++++++++++++++++++++++++++++---- 2 files changed, 44 insertions(+), 6 deletions(-) Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2014-10-06 13:22 ` Prafulla Wadaskar @ 2014-10-08 19:06 ` Albert ARIBAUD 0 siblings, 0 replies; 65+ messages in thread From: Albert ARIBAUD @ 2014-10-08 19:06 UTC (permalink / raw) To: u-boot Hi Prafulla, On Mon, 6 Oct 2014 06:22:29 -0700, Prafulla Wadaskar <prafulla@marvell.com> wrote: > Hi Albert, > > Please pull > The following changes since commit be9f643ae6aa9044c60fe80e3a2c10be8371c692: > > Merge branch 'for-tom' of git://git.denx.de/u-boot-dm (2014-09-26 20:10:48 -0400) > > are available in the git repository at: > > git://git.denx.de/u-boot-marvell.git master > > DrEagle (5): > ARM: sheevaplug: change env location > ARM: sheevaplug: add MVSATA driver > ARM: sheevaplug: add MTD defaults > ARM: sheevaplug: redefine MTDPARTS > ARM: sheevaplug: add HUSH parser > > Michael Walle (1): > lsxl: convert to generic board and fix typo > > include/configs/lsxl.h | 4 ++- > include/configs/sheevaplug.h | 46 +++++++++++++++++++++++++++++++++++++---- > 2 files changed, 44 insertions(+), 6 deletions(-) > > Regards... > Prafulla . . . Applied to u-boot-arm/master, thanks! Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 65+ messages in thread
* [U-Boot] Pull request for u-boot-marvell.git 2012-02-10 19:58 ` Albert ARIBAUD ` (2 preceding siblings ...) 2012-07-03 11:59 ` Prafulla Wadaskar @ 2012-07-03 12:00 ` Prafulla Wadaskar 3 siblings, 0 replies; 65+ messages in thread From: Prafulla Wadaskar @ 2012-07-03 12:00 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: Prafulla Wadaskar > Sent: 03 July 2012 17:29 > To: 'Albert ARIBAUD' > Cc: 'u-boot at lists.denx.de'; Ashish Karkare; Prabhanjan Sarnaik; > 'Wolfgang Denk' > Subject: Pull request for u-boot-marvell.git > > Dear Albert > > Please kindly pull > The following changes since commit > 3e0cac6b5158b22248f57cdf7769bf8d610fec5e: > Rajeshwari Shinde (1): > EXYNOS: SMDK5250: Enable the pinmux setup > > are available in the git repository at: > > u-boot-marvell.git ..BRANCH.NOT.VERIFIED.. Pls kindly consider this patch series for master branch Regards... Prafulla . . . ^ permalink raw reply [flat|nested] 65+ messages in thread
end of thread, other threads:[~2014-10-08 19:06 UTC | newest]
Thread overview: 65+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <DCB55AE5D43FB64FA6D3F5573FA2D42B19FD1E0BDE@SC-VEXCH4.marvell.com>
2012-02-08 9:57 ` [U-Boot] Pull request for u-boot-marvell.git Prafulla Wadaskar
2012-02-10 19:58 ` Albert ARIBAUD
2012-03-02 7:29 ` Prafulla Wadaskar
2012-03-05 12:38 ` Albert ARIBAUD
2012-04-20 6:10 ` Prafulla Wadaskar
2012-04-20 6:46 ` Albert ARIBAUD
2012-07-03 11:59 ` Prafulla Wadaskar
2012-07-05 8:40 ` Albert ARIBAUD
2012-07-05 9:37 ` [U-Boot] Pull request for u-boot-marvell.git - PLEASE HOLD ON Albert ARIBAUD
2012-07-05 9:44 ` [U-Boot] Pull request for u-boot-marvell.git - go ahead Albert ARIBAUD
2012-07-05 11:29 ` [U-Boot] Pull request for u-boot-marvell.git Prafulla Wadaskar
2012-07-05 11:50 ` Albert ARIBAUD
2012-07-05 17:38 ` Prafulla Wadaskar
2012-07-06 21:30 ` Albert ARIBAUD
2012-09-03 9:20 ` Prafulla Wadaskar
2012-09-03 18:59 ` Albert ARIBAUD
2012-09-05 19:56 ` Simon Guinot
2012-09-06 1:21 ` Prafulla Wadaskar
2012-09-06 8:22 ` Albert ARIBAUD
2012-09-06 9:25 ` [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices Simon Guinot
2012-09-06 9:25 ` [U-Boot] [PATCH v3 1/4] lacie_kw: add support for EFI partitions Simon Guinot
2012-09-06 9:25 ` [U-Boot] [PATCH v3 2/4] ARM: add netspace_mini_v2 to mach-types.h Simon Guinot
2012-09-06 9:25 ` [U-Boot] [PATCH v3 3/4] ARM: add support for Network Space v2 Lite and Mini Simon Guinot
2012-09-06 9:25 ` [U-Boot] [PATCH v3 4/4] ARM: add support for d2 Network v2 Simon Guinot
2012-09-06 11:27 ` [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices Simon Guinot
2012-09-06 15:06 ` Albert ARIBAUD
2012-09-06 18:17 ` Prafulla Wadaskar
2012-09-06 20:51 ` [U-Boot] [PATCH v4 0/3] " Simon Guinot
2012-09-06 20:51 ` [U-Boot] [PATCH v4 1/3] lacie_kw: add support for EFI partitions Simon Guinot
2012-09-06 20:51 ` [U-Boot] [PATCH v4 2/3] ARM: add support for Network Space v2 Lite and Mini Simon Guinot
2012-09-06 23:19 ` Prafulla Wadaskar
2012-09-07 9:27 ` Simon Guinot
2012-09-07 15:52 ` Prafulla Wadaskar
2012-09-06 20:51 ` [U-Boot] [PATCH v4 3/3] ARM: add support for d2 Network v2 Simon Guinot
2012-09-06 22:56 ` [U-Boot] [PATCH v4 0/3] Board support and feature for LaCie devices Prafulla Wadaskar
2012-10-03 9:01 ` [U-Boot] Pull request for u-boot-marvell.git Prafulla Wadaskar
2012-10-03 16:06 ` Albert ARIBAUD
2012-12-20 6:56 ` Prafulla Wadaskar
2012-12-20 10:05 ` Prafulla Wadaskar
2012-12-23 15:10 ` Albert ARIBAUD
2013-01-07 12:26 ` Prafulla Wadaskar
2013-01-08 11:35 ` Andreas Bießmann
2013-01-08 15:03 ` Albert ARIBAUD
2013-01-08 17:21 ` Prafulla Wadaskar
2013-01-08 19:14 ` Albert ARIBAUD
2013-01-08 19:51 ` Albert ARIBAUD
2013-01-10 7:54 ` Albert ARIBAUD
[not found] ` <DCB55AE5D43FB64FA6D3F5573FA2D42B1A3B957247@SC-VEXCH4.marvell.com>
2013-04-12 13:54 ` Prafulla Wadaskar
2013-04-12 15:12 ` Albert ARIBAUD
2013-06-20 5:38 ` Prafulla Wadaskar
2013-06-20 8:44 ` Albert ARIBAUD
2013-09-25 11:20 ` Prafulla Wadaskar
2013-10-02 12:51 ` Albert ARIBAUD
2013-10-07 7:18 ` Holger Brunck
2013-10-07 12:58 ` Prafulla Wadaskar
2013-10-10 17:06 ` Holger Brunck
2013-10-14 10:46 ` Prafulla Wadaskar
2013-11-28 13:01 ` Holger Brunck
2013-11-29 3:32 ` Prafulla Wadaskar
2013-12-01 16:00 ` Luka Perkov
2014-01-06 12:38 ` Prafulla Wadaskar
2014-01-08 16:00 ` Albert ARIBAUD
2014-10-06 13:22 ` Prafulla Wadaskar
2014-10-08 19:06 ` Albert ARIBAUD
2012-07-03 12:00 ` Prafulla Wadaskar
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.