From: "Philip, Avinash" <avinashphilip@ti.com>
To: <dwmw2@infradead.org>, <artem.bityutskiy@linux.intel.com>,
<tony@atomide.com>
Cc: <afzal@ti.com>, <linux-mtd@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-doc@vger.kernel.org>,
<devicetree-discuss@lists.ozlabs.org>, <ivan.djelic@parrot.com>,
"Philip, Avinash" <avinashphilip@ti.com>
Subject: [PATCH 0/4] mtd: nand: OMAP: Add support to use ELM as error correction module
Date: Wed, 3 Oct 2012 19:59:45 +0530 [thread overview]
Message-ID: <1349274589-11389-1-git-send-email-avinashphilip@ti.com> (raw)
Adds support to use ELM as BCH 4 & 8 bit error correction module and
adds support for single shot read_page and write_page functions
Platforms containing the ELM module can be used to correct errors
reported by BCH 4, 8 & 16 bit ECC scheme. For now only 4 & 8 bit
support is added.
BCH 4 & 8 bit error detection support is already available in mainline
kernel and works with software error correction.
This series is based on top of [1] &[2]
1. linux-next/master
2. linux-omap-dt/for_3.7/dts_part2
Nand driver tested for BCH 4 & 8 bit error correction per sector.
This being tested by introducing bit errors at multiple sectors inside page.
Philip, Avinash (4):
mtd: nand: omap2: Update nerrors using ecc.strength
mtd: devices: elm: Add support for ELM error correction
ARM: OMAP2: gpmc: Add support for BCH ECC scheme
mtd: nand: omap2: Add data correction support
arch/arm/mach-omap2/gpmc.c | 120 +++++++-
arch/arm/plat-omap/include/plat/gpmc.h | 1 +
drivers/mtd/devices/Makefile | 4 +-
drivers/mtd/devices/elm.c | 446 ++++++++++++++++++++++++++
drivers/mtd/nand/omap2.c | 368 +++++++++++++++++++--
include/linux/platform_data/elm.h | 64 ++++
include/linux/platform_data/mtd-nand-omap2.h | 1 +
7 files changed, 958 insertions(+), 46 deletions(-)
create mode 100644 drivers/mtd/devices/elm.c
create mode 100644 include/linux/platform_data/elm.h
WARNING: multiple messages have this Message-ID (diff)
From: "Philip, Avinash" <avinashphilip@ti.com>
To: dwmw2@infradead.org, artem.bityutskiy@linux.intel.com, tony@atomide.com
Cc: afzal@ti.com, linux-mtd@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-doc@vger.kernel.org,
devicetree-discuss@lists.ozlabs.org, ivan.djelic@parrot.com,
"Philip, Avinash" <avinashphilip@ti.com>
Subject: [PATCH 0/4] mtd: nand: OMAP: Add support to use ELM as error correction module
Date: Wed, 3 Oct 2012 19:59:45 +0530 [thread overview]
Message-ID: <1349274589-11389-1-git-send-email-avinashphilip@ti.com> (raw)
Adds support to use ELM as BCH 4 & 8 bit error correction module and
adds support for single shot read_page and write_page functions
Platforms containing the ELM module can be used to correct errors
reported by BCH 4, 8 & 16 bit ECC scheme. For now only 4 & 8 bit
support is added.
BCH 4 & 8 bit error detection support is already available in mainline
kernel and works with software error correction.
This series is based on top of [1] &[2]
1. linux-next/master
2. linux-omap-dt/for_3.7/dts_part2
Nand driver tested for BCH 4 & 8 bit error correction per sector.
This being tested by introducing bit errors at multiple sectors inside page.
Philip, Avinash (4):
mtd: nand: omap2: Update nerrors using ecc.strength
mtd: devices: elm: Add support for ELM error correction
ARM: OMAP2: gpmc: Add support for BCH ECC scheme
mtd: nand: omap2: Add data correction support
arch/arm/mach-omap2/gpmc.c | 120 +++++++-
arch/arm/plat-omap/include/plat/gpmc.h | 1 +
drivers/mtd/devices/Makefile | 4 +-
drivers/mtd/devices/elm.c | 446 ++++++++++++++++++++++++++
drivers/mtd/nand/omap2.c | 368 +++++++++++++++++++--
include/linux/platform_data/elm.h | 64 ++++
include/linux/platform_data/mtd-nand-omap2.h | 1 +
7 files changed, 958 insertions(+), 46 deletions(-)
create mode 100644 drivers/mtd/devices/elm.c
create mode 100644 include/linux/platform_data/elm.h
WARNING: multiple messages have this Message-ID (diff)
From: "Philip, Avinash" <avinashphilip@ti.com>
To: <dwmw2@infradead.org>, <artem.bityutskiy@linux.intel.com>,
<tony@atomide.com>
Cc: afzal@ti.com, linux-doc@vger.kernel.org,
devicetree-discuss@lists.ozlabs.org,
linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
ivan.djelic@parrot.com, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/4] mtd: nand: OMAP: Add support to use ELM as error correction module
Date: Wed, 3 Oct 2012 19:59:45 +0530 [thread overview]
Message-ID: <1349274589-11389-1-git-send-email-avinashphilip@ti.com> (raw)
Adds support to use ELM as BCH 4 & 8 bit error correction module and
adds support for single shot read_page and write_page functions
Platforms containing the ELM module can be used to correct errors
reported by BCH 4, 8 & 16 bit ECC scheme. For now only 4 & 8 bit
support is added.
BCH 4 & 8 bit error detection support is already available in mainline
kernel and works with software error correction.
This series is based on top of [1] &[2]
1. linux-next/master
2. linux-omap-dt/for_3.7/dts_part2
Nand driver tested for BCH 4 & 8 bit error correction per sector.
This being tested by introducing bit errors at multiple sectors inside page.
Philip, Avinash (4):
mtd: nand: omap2: Update nerrors using ecc.strength
mtd: devices: elm: Add support for ELM error correction
ARM: OMAP2: gpmc: Add support for BCH ECC scheme
mtd: nand: omap2: Add data correction support
arch/arm/mach-omap2/gpmc.c | 120 +++++++-
arch/arm/plat-omap/include/plat/gpmc.h | 1 +
drivers/mtd/devices/Makefile | 4 +-
drivers/mtd/devices/elm.c | 446 ++++++++++++++++++++++++++
drivers/mtd/nand/omap2.c | 368 +++++++++++++++++++--
include/linux/platform_data/elm.h | 64 ++++
include/linux/platform_data/mtd-nand-omap2.h | 1 +
7 files changed, 958 insertions(+), 46 deletions(-)
create mode 100644 drivers/mtd/devices/elm.c
create mode 100644 include/linux/platform_data/elm.h
WARNING: multiple messages have this Message-ID (diff)
From: avinashphilip@ti.com (Philip, Avinash)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/4] mtd: nand: OMAP: Add support to use ELM as error correction module
Date: Wed, 3 Oct 2012 19:59:45 +0530 [thread overview]
Message-ID: <1349274589-11389-1-git-send-email-avinashphilip@ti.com> (raw)
Adds support to use ELM as BCH 4 & 8 bit error correction module and
adds support for single shot read_page and write_page functions
Platforms containing the ELM module can be used to correct errors
reported by BCH 4, 8 & 16 bit ECC scheme. For now only 4 & 8 bit
support is added.
BCH 4 & 8 bit error detection support is already available in mainline
kernel and works with software error correction.
This series is based on top of [1] &[2]
1. linux-next/master
2. linux-omap-dt/for_3.7/dts_part2
Nand driver tested for BCH 4 & 8 bit error correction per sector.
This being tested by introducing bit errors at multiple sectors inside page.
Philip, Avinash (4):
mtd: nand: omap2: Update nerrors using ecc.strength
mtd: devices: elm: Add support for ELM error correction
ARM: OMAP2: gpmc: Add support for BCH ECC scheme
mtd: nand: omap2: Add data correction support
arch/arm/mach-omap2/gpmc.c | 120 +++++++-
arch/arm/plat-omap/include/plat/gpmc.h | 1 +
drivers/mtd/devices/Makefile | 4 +-
drivers/mtd/devices/elm.c | 446 ++++++++++++++++++++++++++
drivers/mtd/nand/omap2.c | 368 +++++++++++++++++++--
include/linux/platform_data/elm.h | 64 ++++
include/linux/platform_data/mtd-nand-omap2.h | 1 +
7 files changed, 958 insertions(+), 46 deletions(-)
create mode 100644 drivers/mtd/devices/elm.c
create mode 100644 include/linux/platform_data/elm.h
next reply other threads:[~2012-10-03 14:47 UTC|newest]
Thread overview: 103+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-03 14:29 Philip, Avinash [this message]
2012-10-03 14:29 ` [PATCH 0/4] mtd: nand: OMAP: Add support to use ELM as error correction module Philip, Avinash
2012-10-03 14:29 ` Philip, Avinash
2012-10-03 14:29 ` Philip, Avinash
2012-10-03 14:29 ` [PATCH 1/4] mtd: nand: omap2: Update nerrors using ecc.strength Philip, Avinash
2012-10-03 14:29 ` Philip, Avinash
2012-10-03 14:29 ` Philip, Avinash
2012-10-03 14:29 ` Philip, Avinash
2012-10-15 18:56 ` Peter Korsgaard
2012-10-15 18:56 ` Peter Korsgaard
2012-10-15 18:56 ` Peter Korsgaard
2012-10-15 18:56 ` Peter Korsgaard
2012-10-23 10:17 ` Philip, Avinash
2012-10-23 10:17 ` Philip, Avinash
2012-10-23 10:17 ` Philip, Avinash
2012-10-23 10:17 ` Philip, Avinash
2012-10-03 14:29 ` [PATCH 2/4] mtd: devices: elm: Add support for ELM error correction Philip, Avinash
2012-10-03 14:29 ` Philip, Avinash
2012-10-03 14:29 ` Philip, Avinash
2012-10-03 14:29 ` Philip, Avinash
2012-10-03 15:10 ` Peter Meerwald
2012-10-03 15:10 ` Peter Meerwald
2012-10-03 15:10 ` Peter Meerwald
2012-10-04 7:49 ` Philip, Avinash
2012-10-04 7:49 ` Philip, Avinash
2012-10-04 7:49 ` Philip, Avinash
2012-10-04 7:49 ` Philip, Avinash
2012-10-15 19:40 ` Peter Korsgaard
2012-10-15 19:40 ` Peter Korsgaard
2012-10-15 19:40 ` Peter Korsgaard
2012-10-15 19:40 ` Peter Korsgaard
2012-10-23 10:17 ` Philip, Avinash
2012-10-23 10:17 ` Philip, Avinash
2012-10-23 10:17 ` Philip, Avinash
2012-10-23 10:17 ` Philip, Avinash
2012-10-03 14:29 ` [PATCH 3/4] ARM: OMAP2: gpmc: Add support for BCH ECC scheme Philip, Avinash
2012-10-03 14:29 ` Philip, Avinash
2012-10-03 14:29 ` Philip, Avinash
2012-10-03 14:29 ` Philip, Avinash
2012-10-03 18:54 ` Ivan Djelic
2012-10-03 18:54 ` Ivan Djelic
2012-10-03 18:54 ` Ivan Djelic
2012-10-03 18:54 ` Ivan Djelic
2012-10-04 8:03 ` Philip, Avinash
2012-10-04 8:03 ` Philip, Avinash
2012-10-04 8:03 ` Philip, Avinash
2012-10-04 8:03 ` Philip, Avinash
2012-10-04 12:04 ` Ivan Djelic
2012-10-04 12:04 ` Ivan Djelic
2012-10-04 12:04 ` Ivan Djelic
2012-10-04 12:04 ` Ivan Djelic
2012-10-15 18:48 ` Peter Korsgaard
2012-10-15 18:48 ` Peter Korsgaard
2012-10-15 18:48 ` Peter Korsgaard
2012-10-15 18:48 ` Peter Korsgaard
2012-10-23 10:18 ` Philip, Avinash
2012-10-23 10:18 ` Philip, Avinash
2012-10-23 10:18 ` Philip, Avinash
2012-10-23 10:18 ` Philip, Avinash
2012-10-03 14:29 ` [PATCH 4/4] mtd: nand: omap2: Add data correction support Philip, Avinash
2012-10-03 14:29 ` Philip, Avinash
2012-10-03 14:29 ` Philip, Avinash
2012-10-03 14:29 ` Philip, Avinash
2012-10-03 19:20 ` Ivan Djelic
2012-10-03 19:20 ` Ivan Djelic
2012-10-03 19:20 ` Ivan Djelic
2012-10-03 19:20 ` Ivan Djelic
2012-10-04 10:22 ` Philip, Avinash
2012-10-04 10:22 ` Philip, Avinash
2012-10-04 10:22 ` Philip, Avinash
2012-10-04 10:22 ` Philip, Avinash
2012-10-05 8:51 ` Philip, Avinash
2012-10-05 8:51 ` Philip, Avinash
2012-10-05 8:51 ` Philip, Avinash
2012-10-05 8:51 ` Philip, Avinash
2012-10-05 14:23 ` Ivan Djelic
2012-10-05 14:23 ` Ivan Djelic
2012-10-05 14:23 ` Ivan Djelic
2012-10-05 14:23 ` Ivan Djelic
2012-10-09 12:36 ` Philip, Avinash
2012-10-09 12:36 ` Philip, Avinash
2012-10-09 12:36 ` Philip, Avinash
2012-10-09 12:36 ` Philip, Avinash
2012-10-10 17:08 ` Ivan Djelic
2012-10-10 17:08 ` Ivan Djelic
2012-10-10 17:08 ` Ivan Djelic
2012-10-10 17:08 ` Ivan Djelic
2012-10-11 5:27 ` Philip, Avinash
2012-10-11 5:27 ` Philip, Avinash
2012-10-11 5:27 ` Philip, Avinash
2012-10-11 5:27 ` Philip, Avinash
2012-10-11 8:21 ` Ivan Djelic
2012-10-11 8:21 ` Ivan Djelic
2012-10-11 8:21 ` Ivan Djelic
2012-10-11 8:21 ` Ivan Djelic
2012-10-11 9:05 ` Philip, Avinash
2012-10-11 9:05 ` Philip, Avinash
2012-10-11 9:05 ` Philip, Avinash
2012-10-11 9:05 ` Philip, Avinash
2012-10-11 14:41 ` Tony Lindgren
2012-10-11 14:41 ` Tony Lindgren
2012-10-11 14:41 ` Tony Lindgren
2012-10-11 14:41 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349274589-11389-1-git-send-email-avinashphilip@ti.com \
--to=avinashphilip@ti.com \
--cc=afzal@ti.com \
--cc=artem.bityutskiy@linux.intel.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=dwmw2@infradead.org \
--cc=ivan.djelic@parrot.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.