* [PATCH 0/3] xfstests patches
@ 2013-03-13 14:57 Eric Sandeen
2013-03-13 14:57 ` [PATCH 1/3] xfstests: add 274 to the prealloc group Eric Sandeen
` (3 more replies)
0 siblings, 4 replies; 44+ messages in thread
From: Eric Sandeen @ 2013-03-13 14:57 UTC (permalink / raw)
To: xfs
2 pretty simple ones, and a new btrfs test
[PATCH 1/3] xfstests: add 274 to the prealloc group
[PATCH 2/3] xfstests: keep newlines out of SCRATCH_DEV_POOL
[PATCH 3/3] xfstests: btrfs tests for basic informational commands
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply [flat|nested] 44+ messages in thread* [PATCH 1/3] xfstests: add 274 to the prealloc group 2013-03-13 14:57 [PATCH 0/3] xfstests patches Eric Sandeen @ 2013-03-13 14:57 ` Eric Sandeen 2013-03-13 17:36 ` Rich Johnston 2013-03-13 14:57 ` Eric Sandeen ` (2 subsequent siblings) 3 siblings, 1 reply; 44+ messages in thread From: Eric Sandeen @ 2013-03-13 14:57 UTC (permalink / raw) To: xfs; +Cc: Eric Sandeen test 274 does preallocation tests but is not in the prealloc group. Signed-off-by: Eric Sandeen <sandeen@redhat.com> --- group | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/group b/group index c3c4161..8096968 100644 --- a/group +++ b/group @@ -397,7 +397,7 @@ stress 271 auto rw quick 272 auto enospc rw 273 auto rw -274 auto rw +274 auto rw prealloc 275 auto rw 276 auto rw metadata 277 auto ioctl quick metadata -- 1.7.1 _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply related [flat|nested] 44+ messages in thread
* Re: [PATCH 1/3] xfstests: add 274 to the prealloc group 2013-03-13 14:57 ` [PATCH 1/3] xfstests: add 274 to the prealloc group Eric Sandeen @ 2013-03-13 17:36 ` Rich Johnston 0 siblings, 0 replies; 44+ messages in thread From: Rich Johnston @ 2013-03-13 17:36 UTC (permalink / raw) To: Eric Sandeen; +Cc: xfs Looks good Eric. Reviewed-by: <rjohnston@sgi.com> _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH 2/3] xfstests: keep newlines out of SCRATCH_DEV_POOL 2013-03-13 14:57 [PATCH 0/3] xfstests patches Eric Sandeen @ 2013-03-13 14:57 ` Eric Sandeen 2013-03-13 14:57 ` Eric Sandeen ` (2 subsequent siblings) 3 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-13 14:57 UTC (permalink / raw) To: xfs; +Cc: Eric Sandeen, linux-btrfs SCRATCH_DEV_POOL processing actually takes the first device out for SCRATCH_DEV and leaves the rest in SCRATCH_DEV_POOL. I'm not totally sold on that behavior, but for now, at least don't populate SCRATCH_DEV_POOL with newlines. Cc: linux-btrfs@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> --- common.config | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/common.config b/common.config index ed0f44c..5ac58bf 100644 --- a/common.config +++ b/common.config @@ -258,7 +258,7 @@ if [ ! -z "$SCRATCH_DEV_POOL" ]; then exit 1 fi SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` - SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | awk '{ for (i = 2; i <= NF; i++) print $i}'` + SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | awk '{ ORS=" "; for (i = 2; i <= NF; i++) print $i}'` fi echo $SCRATCH_DEV | grep -q ":" > /dev/null 2>&1 -- 1.7.1 ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 2/3] xfstests: keep newlines out of SCRATCH_DEV_POOL @ 2013-03-13 14:57 ` Eric Sandeen 0 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-13 14:57 UTC (permalink / raw) To: xfs; +Cc: Eric Sandeen, linux-btrfs SCRATCH_DEV_POOL processing actually takes the first device out for SCRATCH_DEV and leaves the rest in SCRATCH_DEV_POOL. I'm not totally sold on that behavior, but for now, at least don't populate SCRATCH_DEV_POOL with newlines. Cc: linux-btrfs@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> --- common.config | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/common.config b/common.config index ed0f44c..5ac58bf 100644 --- a/common.config +++ b/common.config @@ -258,7 +258,7 @@ if [ ! -z "$SCRATCH_DEV_POOL" ]; then exit 1 fi SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` - SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | awk '{ for (i = 2; i <= NF; i++) print $i}'` + SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | awk '{ ORS=" "; for (i = 2; i <= NF; i++) print $i}'` fi echo $SCRATCH_DEV | grep -q ":" > /dev/null 2>&1 -- 1.7.1 _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply related [flat|nested] 44+ messages in thread
* Re: [PATCH 2/3] xfstests: keep newlines out of SCRATCH_DEV_POOL 2013-03-13 14:57 ` Eric Sandeen @ 2013-03-13 17:43 ` Rich Johnston -1 siblings, 0 replies; 44+ messages in thread From: Rich Johnston @ 2013-03-13 17:43 UTC (permalink / raw) To: Eric Sandeen; +Cc: xfs, linux-btrfs On 03/13/2013 09:57 AM, Eric Sandeen wrote: > SCRATCH_DEV_POOL processing actually takes the first > device out for SCRATCH_DEV and leaves the rest in > SCRATCH_DEV_POOL. > > I'm not totally sold on that behavior, but for now, > at least don't populate SCRATCH_DEV_POOL with newlines. > > Cc: linux-btrfs@vger.kernel.org > Signed-off-by: Eric Sandeen <sandeen@redhat.com> > --- > common.config | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/common.config b/common.config > index ed0f44c..5ac58bf 100644 > --- a/common.config > +++ b/common.config > @@ -258,7 +258,7 @@ if [ ! -z "$SCRATCH_DEV_POOL" ]; then > exit 1 > fi > SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` > - SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | awk '{ for (i = 2; i <= NF; i++) print $i}'` > + SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | awk '{ ORS=" "; for (i = 2; i <= NF; i++) print $i}'` > fi > > echo $SCRATCH_DEV | grep -q ":" > /dev/null 2>&1 > Is the purpose of this patch is so future improvements will be able to parse/use SCRATCH_DEV_POOL easier from within bash? Looks good Eric. Reviewed-by: <rjohnston@sgi.com> Regards --Rich ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 2/3] xfstests: keep newlines out of SCRATCH_DEV_POOL @ 2013-03-13 17:43 ` Rich Johnston 0 siblings, 0 replies; 44+ messages in thread From: Rich Johnston @ 2013-03-13 17:43 UTC (permalink / raw) To: Eric Sandeen; +Cc: linux-btrfs, xfs On 03/13/2013 09:57 AM, Eric Sandeen wrote: > SCRATCH_DEV_POOL processing actually takes the first > device out for SCRATCH_DEV and leaves the rest in > SCRATCH_DEV_POOL. > > I'm not totally sold on that behavior, but for now, > at least don't populate SCRATCH_DEV_POOL with newlines. > > Cc: linux-btrfs@vger.kernel.org > Signed-off-by: Eric Sandeen <sandeen@redhat.com> > --- > common.config | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/common.config b/common.config > index ed0f44c..5ac58bf 100644 > --- a/common.config > +++ b/common.config > @@ -258,7 +258,7 @@ if [ ! -z "$SCRATCH_DEV_POOL" ]; then > exit 1 > fi > SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` > - SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | awk '{ for (i = 2; i <= NF; i++) print $i}'` > + SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | awk '{ ORS=" "; for (i = 2; i <= NF; i++) print $i}'` > fi > > echo $SCRATCH_DEV | grep -q ":" > /dev/null 2>&1 > Is the purpose of this patch is so future improvements will be able to parse/use SCRATCH_DEV_POOL easier from within bash? Looks good Eric. Reviewed-by: <rjohnston@sgi.com> Regards --Rich _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 2/3] xfstests: keep newlines out of SCRATCH_DEV_POOL 2013-03-13 17:43 ` Rich Johnston @ 2013-03-13 17:45 ` Eric Sandeen -1 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-13 17:45 UTC (permalink / raw) To: Rich Johnston; +Cc: xfs, linux-btrfs On 3/13/13 12:43 PM, Rich Johnston wrote: > On 03/13/2013 09:57 AM, Eric Sandeen wrote: >> SCRATCH_DEV_POOL processing actually takes the first >> device out for SCRATCH_DEV and leaves the rest in >> SCRATCH_DEV_POOL. >> >> I'm not totally sold on that behavior, but for now, >> at least don't populate SCRATCH_DEV_POOL with newlines. > >> >> Cc: linux-btrfs@vger.kernel.org >> Signed-off-by: Eric Sandeen <sandeen@redhat.com> >> --- >> common.config | 2 +- >> 1 files changed, 1 insertions(+), 1 deletions(-) >> >> diff --git a/common.config b/common.config >> index ed0f44c..5ac58bf 100644 >> --- a/common.config >> +++ b/common.config >> @@ -258,7 +258,7 @@ if [ ! -z "$SCRATCH_DEV_POOL" ]; then >> exit 1 >> fi >> SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` >> - SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | awk '{ for (i = 2; i <= NF; i++) print $i}'` >> + SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | awk '{ ORS=" "; for (i = 2; i <= NF; i++) print $i}'` >> fi >> >> echo $SCRATCH_DEV | grep -q ":" > /dev/null 2>&1 >> > > Is the purpose of this patch is so future improvements will be able to parse/use SCRATCH_DEV_POOL easier from within bash? Yep, and just generally since it's used as an argument, feeding a string w/ newlines to any command is just a bit odd. -Eric > Looks good Eric. > > Reviewed-by: <rjohnston@sgi.com> > > Regards > --Rich ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 2/3] xfstests: keep newlines out of SCRATCH_DEV_POOL @ 2013-03-13 17:45 ` Eric Sandeen 0 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-13 17:45 UTC (permalink / raw) To: Rich Johnston; +Cc: linux-btrfs, xfs On 3/13/13 12:43 PM, Rich Johnston wrote: > On 03/13/2013 09:57 AM, Eric Sandeen wrote: >> SCRATCH_DEV_POOL processing actually takes the first >> device out for SCRATCH_DEV and leaves the rest in >> SCRATCH_DEV_POOL. >> >> I'm not totally sold on that behavior, but for now, >> at least don't populate SCRATCH_DEV_POOL with newlines. > >> >> Cc: linux-btrfs@vger.kernel.org >> Signed-off-by: Eric Sandeen <sandeen@redhat.com> >> --- >> common.config | 2 +- >> 1 files changed, 1 insertions(+), 1 deletions(-) >> >> diff --git a/common.config b/common.config >> index ed0f44c..5ac58bf 100644 >> --- a/common.config >> +++ b/common.config >> @@ -258,7 +258,7 @@ if [ ! -z "$SCRATCH_DEV_POOL" ]; then >> exit 1 >> fi >> SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` >> - SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | awk '{ for (i = 2; i <= NF; i++) print $i}'` >> + SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | awk '{ ORS=" "; for (i = 2; i <= NF; i++) print $i}'` >> fi >> >> echo $SCRATCH_DEV | grep -q ":" > /dev/null 2>&1 >> > > Is the purpose of this patch is so future improvements will be able to parse/use SCRATCH_DEV_POOL easier from within bash? Yep, and just generally since it's used as an argument, feeding a string w/ newlines to any command is just a bit odd. -Eric > Looks good Eric. > > Reviewed-by: <rjohnston@sgi.com> > > Regards > --Rich _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH 3/3] xfstests: btrfs tests for basic informational commands 2013-03-13 14:57 [PATCH 0/3] xfstests patches Eric Sandeen @ 2013-03-13 14:57 ` Eric Sandeen 2013-03-13 14:57 ` Eric Sandeen ` (2 subsequent siblings) 3 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-13 14:57 UTC (permalink / raw) To: xfs; +Cc: Eric Sandeen, linux-btrfs Run basic btrfs information commands in various ways, performing sanity tests of: filesystem show, label, sync, and device stats (sync is included just because it's simple). These are mostly just smoke tests, although for example show by label & UUID should verify that the correct fs was shown. This also adds quite a few new filters to accomodate the output of the new commands. Cc: linux-btrfs@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> --- 313 | 96 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 313.out | 51 ++++++++++++++++++++++++++++++ btrfs.filter | 47 ++++++++++++++++++++++++++++ common.filter | 24 ++++++++++++++ group | 1 + 5 files changed, 219 insertions(+), 0 deletions(-) create mode 100755 313 create mode 100644 313.out create mode 100644 btrfs.filter diff --git a/313 b/313 new file mode 100755 index 0000000..6effb0e --- /dev/null +++ b/313 @@ -0,0 +1,96 @@ +#! /bin/bash +# FS QA Test No. 313 +# +# run basic btrfs information commands in various ways +# sanity tests: filesystem show, label, sync, and device stats +# +#----------------------------------------------------------------------- +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# +# creator +owner=sandeen@redhat.com + +seq=`basename $0` +echo "== QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common.rc +. ./btrfs.filter + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_supported_os Linux +_require_scratch +_require_scratch_dev_pool + +rm -f $seq.full + +FIRST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` +LAST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $NF}'` +TOTAL_DEVS=`echo $SCRATCH_DEV $SCRATCH_DEV_POOL | wc -w` +LABEL=TestLabel.$seq + +echo "Scratch $SCRATCH_DEV First $FIRST_POOL_DEV last $LAST_POOL_DEV Total $TOTAL_DEVS" > $seq.full + +_scratch_mkfs $SCRATCH_DEV_POOL >> $seq.full 2>&1 || _fail "mkfs failed" + +# These have to be done unmounted...? +echo "== Set filesystem label to $LABEL" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL +echo "== Get filesystem label" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV + +echo "== Mount." +_scratch_mount + +echo "== Show filesystem by label" +$BTRFS_UTIL_PROG filesystem show $LABEL | _filter_btrfs_filesystem_show $TOTAL_DEVS +UUID=`$BTRFS_UTIL_PROG filesystem show $LABEL | grep uuid: | awk '{print $NF}'` + +echo "UUID $UUID" >> $seq.full + +echo "== Show filesystem by UUID" +$BTRFS_UTIL_PROG filesystem show $UUID | _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID + +echo "== Sync filesystem" +$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch + +echo "== Show device stats by mountpoint" +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats +echo "== Show device stats by first/scratch dev" +$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats +echo "== Show device stats by second dev" +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" +echo "== Show device stats by last dev" +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" + +# success, all done +status=0 +exit diff --git a/313.out b/313.out new file mode 100644 index 0000000..1aa59a1 --- /dev/null +++ b/313.out @@ -0,0 +1,51 @@ +== QA output created by 313 +== Set filesystem label to TestLabel.313 +== Get filesystem label +TestLabel.313 +== Mount. +== Show filesystem by label +Label: 'TestLabel.313' uuid: <UUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Show filesystem by UUID +Label: 'TestLabel.313' uuid: <EXACTUUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Sync filesystem +FSSync 'SCRATCH_MNT' +== Show device stats by mountpoint +[SCRATCH_DEV].write_io_errs <NUM> +[SCRATCH_DEV].read_io_errs <NUM> +[SCRATCH_DEV].flush_io_errs <NUM> +[SCRATCH_DEV].corruption_errs <NUM> +[SCRATCH_DEV].generation_errs <NUM> +[SCRATCH_DEV].write_io_errs <NUM> +[SCRATCH_DEV].read_io_errs <NUM> +[SCRATCH_DEV].flush_io_errs <NUM> +[SCRATCH_DEV].corruption_errs <NUM> +[SCRATCH_DEV].generation_errs <NUM> +[SCRATCH_DEV].write_io_errs <NUM> +[SCRATCH_DEV].read_io_errs <NUM> +[SCRATCH_DEV].flush_io_errs <NUM> +[SCRATCH_DEV].corruption_errs <NUM> +[SCRATCH_DEV].generation_errs <NUM> +== Show device stats by first/scratch dev +[SCRATCH_DEV].write_io_errs <NUM> +[SCRATCH_DEV].read_io_errs <NUM> +[SCRATCH_DEV].flush_io_errs <NUM> +[SCRATCH_DEV].corruption_errs <NUM> +[SCRATCH_DEV].generation_errs <NUM> +== Show device stats by second dev +[FIRST_POOL_DEV].write_io_errs 0 +[FIRST_POOL_DEV].read_io_errs 0 +[FIRST_POOL_DEV].flush_io_errs 0 +[FIRST_POOL_DEV].corruption_errs 0 +[FIRST_POOL_DEV].generation_errs 0 +== Show device stats by last dev +[LAST_POOL_DEV].write_io_errs 0 +[LAST_POOL_DEV].read_io_errs 0 +[LAST_POOL_DEV].flush_io_errs 0 +[LAST_POOL_DEV].corruption_errs 0 +[LAST_POOL_DEV].generation_errs 0 diff --git a/btrfs.filter b/btrfs.filter new file mode 100644 index 0000000..4e315aa --- /dev/null +++ b/btrfs.filter @@ -0,0 +1,47 @@ +# Filters for btrfs command output + +. ./common.filter + +# Some, but not all, commands emit "Btrfs <version>" +_filter_btrfs_version() +{ + sed -e "s/^Btrfs.*//g" +} + +_filter_devid() +{ + sed -e "s/\(devid\s\+\)[0-9]\+/\1 <DEVID>/g" +} + +# If passed a number as first arg, filter that number of devices +# If passed a UUID as second arg, filter that exact UUID +_filter_btrfs_filesystem_show() +{ + if [ ! -z $1 ]; then + NUMDEVS=$1 + NUM_SUBST="<EXACTNUM>" + else + NUMDEVS="[0-9]\+" + NUM_SUBST="<NUM>" + fi + + UUID="" + if [ ! -z $2 ]; then + UUID=$2 + fi + + # the uniq collapses all device lines into 1 + _filter_uuid $UUID | _filter_scratch | _filter_scratch_pool | \ + _filter_size | _filter_btrfs_version | _filter_devid | \ + sed -e "s/\(Total devices\) $NUMDEVS/\1 $NUM_SUBST/g" | \ + uniq +} + +_filter_btrfs_device_stats() +{ + _filter_scratch | _filter_scratch_pool | \ + sed -e "s/[0-9]\+$/<NUM>/g" +} + +# make sure this script returns success +/bin/true diff --git a/common.filter b/common.filter index c854a98..4de9d3d 100644 --- a/common.filter +++ b/common.filter @@ -226,6 +226,13 @@ _filter_scratch() sed -e "s,$SCRATCH_DEV,SCRATCH_DEV,g" -e "s,$SCRATCH_MNT,SCRATCH_MNT,g" } +# Turn any device in the scratch pool into SCRATCH_DEV +_filter_scratch_pool() +{ + FILTER_STRINGS=`echo $SCRATCH_DEV_POOL | sed -e 's/\s\+/\\\|/g'` + sed -e "s,$FILTER_STRINGS,SCRATCH_DEV,g" +} + _filter_spaces() { sed -e 's/ [ ]*/ /g' @@ -238,5 +245,22 @@ _filter_ln() -e "s,failed to create,creating," } +# If given an arg, filter *that* UUID string +# Otherwise look for something that looks like a generic UUID +_filter_uuid() +{ + if [ ! -z $1 ]; then + sed -e "s/\(uuid:\) $UUID/\1 <EXACTUUID>/i" + else + sed -e "s/\(uuid:\) *[0-9a-f-][0-9a-f-]*/\1 <UUID>/i" + fi +} + +# Filter out sizes like 6.14MB etc +_filter_size() +{ + sed -e "s/[0-9\.]\+\s\?[b|k|m|g|t][b]\?/<SIZE>/ig" +} + # make sure this script returns success /bin/true diff --git a/group b/group index 8096968..fcbdfb6 100644 --- a/group +++ b/group @@ -429,3 +429,4 @@ stress 303 aio dangerous ioctl rw stress 304 aio dangerous ioctl rw stress 305 aio dangerous enospc rw stress +313 auto quick -- 1.7.1 ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 3/3] xfstests: btrfs tests for basic informational commands @ 2013-03-13 14:57 ` Eric Sandeen 0 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-13 14:57 UTC (permalink / raw) To: xfs; +Cc: Eric Sandeen, linux-btrfs Run basic btrfs information commands in various ways, performing sanity tests of: filesystem show, label, sync, and device stats (sync is included just because it's simple). These are mostly just smoke tests, although for example show by label & UUID should verify that the correct fs was shown. This also adds quite a few new filters to accomodate the output of the new commands. Cc: linux-btrfs@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> --- 313 | 96 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 313.out | 51 ++++++++++++++++++++++++++++++ btrfs.filter | 47 ++++++++++++++++++++++++++++ common.filter | 24 ++++++++++++++ group | 1 + 5 files changed, 219 insertions(+), 0 deletions(-) create mode 100755 313 create mode 100644 313.out create mode 100644 btrfs.filter diff --git a/313 b/313 new file mode 100755 index 0000000..6effb0e --- /dev/null +++ b/313 @@ -0,0 +1,96 @@ +#! /bin/bash +# FS QA Test No. 313 +# +# run basic btrfs information commands in various ways +# sanity tests: filesystem show, label, sync, and device stats +# +#----------------------------------------------------------------------- +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# +# creator +owner=sandeen@redhat.com + +seq=`basename $0` +echo "== QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common.rc +. ./btrfs.filter + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_supported_os Linux +_require_scratch +_require_scratch_dev_pool + +rm -f $seq.full + +FIRST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` +LAST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $NF}'` +TOTAL_DEVS=`echo $SCRATCH_DEV $SCRATCH_DEV_POOL | wc -w` +LABEL=TestLabel.$seq + +echo "Scratch $SCRATCH_DEV First $FIRST_POOL_DEV last $LAST_POOL_DEV Total $TOTAL_DEVS" > $seq.full + +_scratch_mkfs $SCRATCH_DEV_POOL >> $seq.full 2>&1 || _fail "mkfs failed" + +# These have to be done unmounted...? +echo "== Set filesystem label to $LABEL" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL +echo "== Get filesystem label" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV + +echo "== Mount." +_scratch_mount + +echo "== Show filesystem by label" +$BTRFS_UTIL_PROG filesystem show $LABEL | _filter_btrfs_filesystem_show $TOTAL_DEVS +UUID=`$BTRFS_UTIL_PROG filesystem show $LABEL | grep uuid: | awk '{print $NF}'` + +echo "UUID $UUID" >> $seq.full + +echo "== Show filesystem by UUID" +$BTRFS_UTIL_PROG filesystem show $UUID | _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID + +echo "== Sync filesystem" +$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch + +echo "== Show device stats by mountpoint" +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats +echo "== Show device stats by first/scratch dev" +$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats +echo "== Show device stats by second dev" +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" +echo "== Show device stats by last dev" +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" + +# success, all done +status=0 +exit diff --git a/313.out b/313.out new file mode 100644 index 0000000..1aa59a1 --- /dev/null +++ b/313.out @@ -0,0 +1,51 @@ +== QA output created by 313 +== Set filesystem label to TestLabel.313 +== Get filesystem label +TestLabel.313 +== Mount. +== Show filesystem by label +Label: 'TestLabel.313' uuid: <UUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Show filesystem by UUID +Label: 'TestLabel.313' uuid: <EXACTUUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Sync filesystem +FSSync 'SCRATCH_MNT' +== Show device stats by mountpoint +[SCRATCH_DEV].write_io_errs <NUM> +[SCRATCH_DEV].read_io_errs <NUM> +[SCRATCH_DEV].flush_io_errs <NUM> +[SCRATCH_DEV].corruption_errs <NUM> +[SCRATCH_DEV].generation_errs <NUM> +[SCRATCH_DEV].write_io_errs <NUM> +[SCRATCH_DEV].read_io_errs <NUM> +[SCRATCH_DEV].flush_io_errs <NUM> +[SCRATCH_DEV].corruption_errs <NUM> +[SCRATCH_DEV].generation_errs <NUM> +[SCRATCH_DEV].write_io_errs <NUM> +[SCRATCH_DEV].read_io_errs <NUM> +[SCRATCH_DEV].flush_io_errs <NUM> +[SCRATCH_DEV].corruption_errs <NUM> +[SCRATCH_DEV].generation_errs <NUM> +== Show device stats by first/scratch dev +[SCRATCH_DEV].write_io_errs <NUM> +[SCRATCH_DEV].read_io_errs <NUM> +[SCRATCH_DEV].flush_io_errs <NUM> +[SCRATCH_DEV].corruption_errs <NUM> +[SCRATCH_DEV].generation_errs <NUM> +== Show device stats by second dev +[FIRST_POOL_DEV].write_io_errs 0 +[FIRST_POOL_DEV].read_io_errs 0 +[FIRST_POOL_DEV].flush_io_errs 0 +[FIRST_POOL_DEV].corruption_errs 0 +[FIRST_POOL_DEV].generation_errs 0 +== Show device stats by last dev +[LAST_POOL_DEV].write_io_errs 0 +[LAST_POOL_DEV].read_io_errs 0 +[LAST_POOL_DEV].flush_io_errs 0 +[LAST_POOL_DEV].corruption_errs 0 +[LAST_POOL_DEV].generation_errs 0 diff --git a/btrfs.filter b/btrfs.filter new file mode 100644 index 0000000..4e315aa --- /dev/null +++ b/btrfs.filter @@ -0,0 +1,47 @@ +# Filters for btrfs command output + +. ./common.filter + +# Some, but not all, commands emit "Btrfs <version>" +_filter_btrfs_version() +{ + sed -e "s/^Btrfs.*//g" +} + +_filter_devid() +{ + sed -e "s/\(devid\s\+\)[0-9]\+/\1 <DEVID>/g" +} + +# If passed a number as first arg, filter that number of devices +# If passed a UUID as second arg, filter that exact UUID +_filter_btrfs_filesystem_show() +{ + if [ ! -z $1 ]; then + NUMDEVS=$1 + NUM_SUBST="<EXACTNUM>" + else + NUMDEVS="[0-9]\+" + NUM_SUBST="<NUM>" + fi + + UUID="" + if [ ! -z $2 ]; then + UUID=$2 + fi + + # the uniq collapses all device lines into 1 + _filter_uuid $UUID | _filter_scratch | _filter_scratch_pool | \ + _filter_size | _filter_btrfs_version | _filter_devid | \ + sed -e "s/\(Total devices\) $NUMDEVS/\1 $NUM_SUBST/g" | \ + uniq +} + +_filter_btrfs_device_stats() +{ + _filter_scratch | _filter_scratch_pool | \ + sed -e "s/[0-9]\+$/<NUM>/g" +} + +# make sure this script returns success +/bin/true diff --git a/common.filter b/common.filter index c854a98..4de9d3d 100644 --- a/common.filter +++ b/common.filter @@ -226,6 +226,13 @@ _filter_scratch() sed -e "s,$SCRATCH_DEV,SCRATCH_DEV,g" -e "s,$SCRATCH_MNT,SCRATCH_MNT,g" } +# Turn any device in the scratch pool into SCRATCH_DEV +_filter_scratch_pool() +{ + FILTER_STRINGS=`echo $SCRATCH_DEV_POOL | sed -e 's/\s\+/\\\|/g'` + sed -e "s,$FILTER_STRINGS,SCRATCH_DEV,g" +} + _filter_spaces() { sed -e 's/ [ ]*/ /g' @@ -238,5 +245,22 @@ _filter_ln() -e "s,failed to create,creating," } +# If given an arg, filter *that* UUID string +# Otherwise look for something that looks like a generic UUID +_filter_uuid() +{ + if [ ! -z $1 ]; then + sed -e "s/\(uuid:\) $UUID/\1 <EXACTUUID>/i" + else + sed -e "s/\(uuid:\) *[0-9a-f-][0-9a-f-]*/\1 <UUID>/i" + fi +} + +# Filter out sizes like 6.14MB etc +_filter_size() +{ + sed -e "s/[0-9\.]\+\s\?[b|k|m|g|t][b]\?/<SIZE>/ig" +} + # make sure this script returns success /bin/true diff --git a/group b/group index 8096968..fcbdfb6 100644 --- a/group +++ b/group @@ -429,3 +429,4 @@ stress 303 aio dangerous ioctl rw stress 304 aio dangerous ioctl rw stress 305 aio dangerous enospc rw stress +313 auto quick -- 1.7.1 _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply related [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3] xfstests: btrfs tests for basic informational commands 2013-03-13 14:57 ` Eric Sandeen @ 2013-03-13 15:32 ` Stefan Behrens -1 siblings, 0 replies; 44+ messages in thread From: Stefan Behrens @ 2013-03-13 15:32 UTC (permalink / raw) To: Eric Sandeen; +Cc: xfs, linux-btrfs On Wed, 13 Mar 2013 09:57:03 -0500, Eric Sandeen wrote: [...] > +echo "== Show device stats by mountpoint" > +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats Is the number of devices in SCRATCH_DEV_POOL fixed to 3? Otherwise you should pipe the device-stats-by-mountpoint through "head -10" to avoid failures if the number of devices is != 3. Possible additional checks (but I am not sure that we really need this additional level of detail in this check) would be: 1. The number of lines is 5 * number of devices. 2. The 5-line block that is printed for each device always looks the same (after applying _filter_btrfs_device_stats). > +echo "== Show device stats by first/scratch dev" > +$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats > +echo "== Show device stats by second dev" > +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" > +echo "== Show device stats by last dev" > +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" > + > +# success, all done > +status=0 > +exit > diff --git a/313.out b/313.out > new file mode 100644 > index 0000000..1aa59a1 > --- /dev/null > +++ b/313.out > @@ -0,0 +1,51 @@ > +== QA output created by 313 > +== Set filesystem label to TestLabel.313 > +== Get filesystem label > +TestLabel.313 > +== Mount. > +== Show filesystem by label > +Label: 'TestLabel.313' uuid: <UUID> > + Total devices <EXACTNUM> FS bytes used <SIZE> > + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV > + > +== Show filesystem by UUID > +Label: 'TestLabel.313' uuid: <EXACTUUID> > + Total devices <EXACTNUM> FS bytes used <SIZE> > + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV > + > +== Sync filesystem > +FSSync 'SCRATCH_MNT' > +== Show device stats by mountpoint > +[SCRATCH_DEV].write_io_errs <NUM> > +[SCRATCH_DEV].read_io_errs <NUM> > +[SCRATCH_DEV].flush_io_errs <NUM> > +[SCRATCH_DEV].corruption_errs <NUM> > +[SCRATCH_DEV].generation_errs <NUM> > +[SCRATCH_DEV].write_io_errs <NUM> > +[SCRATCH_DEV].read_io_errs <NUM> > +[SCRATCH_DEV].flush_io_errs <NUM> > +[SCRATCH_DEV].corruption_errs <NUM> > +[SCRATCH_DEV].generation_errs <NUM> > +[SCRATCH_DEV].write_io_errs <NUM> > +[SCRATCH_DEV].read_io_errs <NUM> > +[SCRATCH_DEV].flush_io_errs <NUM> > +[SCRATCH_DEV].corruption_errs <NUM> > +[SCRATCH_DEV].generation_errs <NUM> 3 devices in this case. > +== Show device stats by first/scratch dev > +[SCRATCH_DEV].write_io_errs <NUM> > +[SCRATCH_DEV].read_io_errs <NUM> > +[SCRATCH_DEV].flush_io_errs <NUM> > +[SCRATCH_DEV].corruption_errs <NUM> > +[SCRATCH_DEV].generation_errs <NUM> > +== Show device stats by second dev > +[FIRST_POOL_DEV].write_io_errs 0 > +[FIRST_POOL_DEV].read_io_errs 0 > +[FIRST_POOL_DEV].flush_io_errs 0 > +[FIRST_POOL_DEV].corruption_errs 0 > +[FIRST_POOL_DEV].generation_errs 0 > +== Show device stats by last dev > +[LAST_POOL_DEV].write_io_errs 0 > +[LAST_POOL_DEV].read_io_errs 0 > +[LAST_POOL_DEV].flush_io_errs 0 > +[LAST_POOL_DEV].corruption_errs 0 > +[LAST_POOL_DEV].generation_errs 0 [...] ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3] xfstests: btrfs tests for basic informational commands @ 2013-03-13 15:32 ` Stefan Behrens 0 siblings, 0 replies; 44+ messages in thread From: Stefan Behrens @ 2013-03-13 15:32 UTC (permalink / raw) To: Eric Sandeen; +Cc: linux-btrfs, xfs On Wed, 13 Mar 2013 09:57:03 -0500, Eric Sandeen wrote: [...] > +echo "== Show device stats by mountpoint" > +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats Is the number of devices in SCRATCH_DEV_POOL fixed to 3? Otherwise you should pipe the device-stats-by-mountpoint through "head -10" to avoid failures if the number of devices is != 3. Possible additional checks (but I am not sure that we really need this additional level of detail in this check) would be: 1. The number of lines is 5 * number of devices. 2. The 5-line block that is printed for each device always looks the same (after applying _filter_btrfs_device_stats). > +echo "== Show device stats by first/scratch dev" > +$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats > +echo "== Show device stats by second dev" > +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" > +echo "== Show device stats by last dev" > +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" > + > +# success, all done > +status=0 > +exit > diff --git a/313.out b/313.out > new file mode 100644 > index 0000000..1aa59a1 > --- /dev/null > +++ b/313.out > @@ -0,0 +1,51 @@ > +== QA output created by 313 > +== Set filesystem label to TestLabel.313 > +== Get filesystem label > +TestLabel.313 > +== Mount. > +== Show filesystem by label > +Label: 'TestLabel.313' uuid: <UUID> > + Total devices <EXACTNUM> FS bytes used <SIZE> > + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV > + > +== Show filesystem by UUID > +Label: 'TestLabel.313' uuid: <EXACTUUID> > + Total devices <EXACTNUM> FS bytes used <SIZE> > + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV > + > +== Sync filesystem > +FSSync 'SCRATCH_MNT' > +== Show device stats by mountpoint > +[SCRATCH_DEV].write_io_errs <NUM> > +[SCRATCH_DEV].read_io_errs <NUM> > +[SCRATCH_DEV].flush_io_errs <NUM> > +[SCRATCH_DEV].corruption_errs <NUM> > +[SCRATCH_DEV].generation_errs <NUM> > +[SCRATCH_DEV].write_io_errs <NUM> > +[SCRATCH_DEV].read_io_errs <NUM> > +[SCRATCH_DEV].flush_io_errs <NUM> > +[SCRATCH_DEV].corruption_errs <NUM> > +[SCRATCH_DEV].generation_errs <NUM> > +[SCRATCH_DEV].write_io_errs <NUM> > +[SCRATCH_DEV].read_io_errs <NUM> > +[SCRATCH_DEV].flush_io_errs <NUM> > +[SCRATCH_DEV].corruption_errs <NUM> > +[SCRATCH_DEV].generation_errs <NUM> 3 devices in this case. > +== Show device stats by first/scratch dev > +[SCRATCH_DEV].write_io_errs <NUM> > +[SCRATCH_DEV].read_io_errs <NUM> > +[SCRATCH_DEV].flush_io_errs <NUM> > +[SCRATCH_DEV].corruption_errs <NUM> > +[SCRATCH_DEV].generation_errs <NUM> > +== Show device stats by second dev > +[FIRST_POOL_DEV].write_io_errs 0 > +[FIRST_POOL_DEV].read_io_errs 0 > +[FIRST_POOL_DEV].flush_io_errs 0 > +[FIRST_POOL_DEV].corruption_errs 0 > +[FIRST_POOL_DEV].generation_errs 0 > +== Show device stats by last dev > +[LAST_POOL_DEV].write_io_errs 0 > +[LAST_POOL_DEV].read_io_errs 0 > +[LAST_POOL_DEV].flush_io_errs 0 > +[LAST_POOL_DEV].corruption_errs 0 > +[LAST_POOL_DEV].generation_errs 0 [...] _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3] xfstests: btrfs tests for basic informational commands 2013-03-13 15:32 ` Stefan Behrens @ 2013-03-13 16:17 ` Eric Sandeen -1 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-13 16:17 UTC (permalink / raw) To: Stefan Behrens; +Cc: xfs, linux-btrfs On 3/13/13 10:32 AM, Stefan Behrens wrote: > On Wed, 13 Mar 2013 09:57:03 -0500, Eric Sandeen wrote: > [...] >> +echo "== Show device stats by mountpoint" >> +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats > > Is the number of devices in SCRATCH_DEV_POOL fixed to 3? Otherwise you > should pipe the device-stats-by-mountpoint through "head -10" to avoid > failures if the number of devices is != 3. Oh, you are right. I had meant to filter device stats through "uniq" after replacing all devices & numbers. I'll add that, then I think it should be ok. thanks for catching that. > Possible additional checks (but I am not sure that we really need this > additional level of detail in this check) would be: > 1. The number of lines is 5 * number of devices. > 2. The 5-line block that is printed for each device always looks the > same (after applying _filter_btrfs_device_stats). hm, perhaps - I wonder if that might be fragile? I guess if *any* output changes, the test will break . . . Thanks for the review! -Eric >> +echo "== Show device stats by first/scratch dev" >> +$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats >> +echo "== Show device stats by second dev" >> +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" >> +echo "== Show device stats by last dev" >> +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" >> + >> +# success, all done >> +status=0 >> +exit >> diff --git a/313.out b/313.out >> new file mode 100644 >> index 0000000..1aa59a1 >> --- /dev/null >> +++ b/313.out >> @@ -0,0 +1,51 @@ >> +== QA output created by 313 >> +== Set filesystem label to TestLabel.313 >> +== Get filesystem label >> +TestLabel.313 >> +== Mount. >> +== Show filesystem by label >> +Label: 'TestLabel.313' uuid: <UUID> >> + Total devices <EXACTNUM> FS bytes used <SIZE> >> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV >> + >> +== Show filesystem by UUID >> +Label: 'TestLabel.313' uuid: <EXACTUUID> >> + Total devices <EXACTNUM> FS bytes used <SIZE> >> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV >> + >> +== Sync filesystem >> +FSSync 'SCRATCH_MNT' >> +== Show device stats by mountpoint >> +[SCRATCH_DEV].write_io_errs <NUM> >> +[SCRATCH_DEV].read_io_errs <NUM> >> +[SCRATCH_DEV].flush_io_errs <NUM> >> +[SCRATCH_DEV].corruption_errs <NUM> >> +[SCRATCH_DEV].generation_errs <NUM> >> +[SCRATCH_DEV].write_io_errs <NUM> >> +[SCRATCH_DEV].read_io_errs <NUM> >> +[SCRATCH_DEV].flush_io_errs <NUM> >> +[SCRATCH_DEV].corruption_errs <NUM> >> +[SCRATCH_DEV].generation_errs <NUM> >> +[SCRATCH_DEV].write_io_errs <NUM> >> +[SCRATCH_DEV].read_io_errs <NUM> >> +[SCRATCH_DEV].flush_io_errs <NUM> >> +[SCRATCH_DEV].corruption_errs <NUM> >> +[SCRATCH_DEV].generation_errs <NUM> > > 3 devices in this case. Yep, oops. >> +== Show device stats by first/scratch dev >> +[SCRATCH_DEV].write_io_errs <NUM> >> +[SCRATCH_DEV].read_io_errs <NUM> >> +[SCRATCH_DEV].flush_io_errs <NUM> >> +[SCRATCH_DEV].corruption_errs <NUM> >> +[SCRATCH_DEV].generation_errs <NUM> >> +== Show device stats by second dev >> +[FIRST_POOL_DEV].write_io_errs 0 >> +[FIRST_POOL_DEV].read_io_errs 0 >> +[FIRST_POOL_DEV].flush_io_errs 0 >> +[FIRST_POOL_DEV].corruption_errs 0 >> +[FIRST_POOL_DEV].generation_errs 0 >> +== Show device stats by last dev >> +[LAST_POOL_DEV].write_io_errs 0 >> +[LAST_POOL_DEV].read_io_errs 0 >> +[LAST_POOL_DEV].flush_io_errs 0 >> +[LAST_POOL_DEV].corruption_errs 0 >> +[LAST_POOL_DEV].generation_errs 0 > [...] > ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3] xfstests: btrfs tests for basic informational commands @ 2013-03-13 16:17 ` Eric Sandeen 0 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-13 16:17 UTC (permalink / raw) To: Stefan Behrens; +Cc: linux-btrfs, xfs On 3/13/13 10:32 AM, Stefan Behrens wrote: > On Wed, 13 Mar 2013 09:57:03 -0500, Eric Sandeen wrote: > [...] >> +echo "== Show device stats by mountpoint" >> +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats > > Is the number of devices in SCRATCH_DEV_POOL fixed to 3? Otherwise you > should pipe the device-stats-by-mountpoint through "head -10" to avoid > failures if the number of devices is != 3. Oh, you are right. I had meant to filter device stats through "uniq" after replacing all devices & numbers. I'll add that, then I think it should be ok. thanks for catching that. > Possible additional checks (but I am not sure that we really need this > additional level of detail in this check) would be: > 1. The number of lines is 5 * number of devices. > 2. The 5-line block that is printed for each device always looks the > same (after applying _filter_btrfs_device_stats). hm, perhaps - I wonder if that might be fragile? I guess if *any* output changes, the test will break . . . Thanks for the review! -Eric >> +echo "== Show device stats by first/scratch dev" >> +$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats >> +echo "== Show device stats by second dev" >> +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" >> +echo "== Show device stats by last dev" >> +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" >> + >> +# success, all done >> +status=0 >> +exit >> diff --git a/313.out b/313.out >> new file mode 100644 >> index 0000000..1aa59a1 >> --- /dev/null >> +++ b/313.out >> @@ -0,0 +1,51 @@ >> +== QA output created by 313 >> +== Set filesystem label to TestLabel.313 >> +== Get filesystem label >> +TestLabel.313 >> +== Mount. >> +== Show filesystem by label >> +Label: 'TestLabel.313' uuid: <UUID> >> + Total devices <EXACTNUM> FS bytes used <SIZE> >> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV >> + >> +== Show filesystem by UUID >> +Label: 'TestLabel.313' uuid: <EXACTUUID> >> + Total devices <EXACTNUM> FS bytes used <SIZE> >> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV >> + >> +== Sync filesystem >> +FSSync 'SCRATCH_MNT' >> +== Show device stats by mountpoint >> +[SCRATCH_DEV].write_io_errs <NUM> >> +[SCRATCH_DEV].read_io_errs <NUM> >> +[SCRATCH_DEV].flush_io_errs <NUM> >> +[SCRATCH_DEV].corruption_errs <NUM> >> +[SCRATCH_DEV].generation_errs <NUM> >> +[SCRATCH_DEV].write_io_errs <NUM> >> +[SCRATCH_DEV].read_io_errs <NUM> >> +[SCRATCH_DEV].flush_io_errs <NUM> >> +[SCRATCH_DEV].corruption_errs <NUM> >> +[SCRATCH_DEV].generation_errs <NUM> >> +[SCRATCH_DEV].write_io_errs <NUM> >> +[SCRATCH_DEV].read_io_errs <NUM> >> +[SCRATCH_DEV].flush_io_errs <NUM> >> +[SCRATCH_DEV].corruption_errs <NUM> >> +[SCRATCH_DEV].generation_errs <NUM> > > 3 devices in this case. Yep, oops. >> +== Show device stats by first/scratch dev >> +[SCRATCH_DEV].write_io_errs <NUM> >> +[SCRATCH_DEV].read_io_errs <NUM> >> +[SCRATCH_DEV].flush_io_errs <NUM> >> +[SCRATCH_DEV].corruption_errs <NUM> >> +[SCRATCH_DEV].generation_errs <NUM> >> +== Show device stats by second dev >> +[FIRST_POOL_DEV].write_io_errs 0 >> +[FIRST_POOL_DEV].read_io_errs 0 >> +[FIRST_POOL_DEV].flush_io_errs 0 >> +[FIRST_POOL_DEV].corruption_errs 0 >> +[FIRST_POOL_DEV].generation_errs 0 >> +== Show device stats by last dev >> +[LAST_POOL_DEV].write_io_errs 0 >> +[LAST_POOL_DEV].read_io_errs 0 >> +[LAST_POOL_DEV].flush_io_errs 0 >> +[LAST_POOL_DEV].corruption_errs 0 >> +[LAST_POOL_DEV].generation_errs 0 > [...] > _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3] xfstests: btrfs tests for basic informational commands 2013-03-13 16:17 ` Eric Sandeen @ 2013-03-13 17:47 ` Rich Johnston -1 siblings, 0 replies; 44+ messages in thread From: Rich Johnston @ 2013-03-13 17:47 UTC (permalink / raw) To: Eric Sandeen; +Cc: Stefan Behrens, linux-btrfs, xfs Looks good Eric, but I will wait for Stefan to look at this version to make sure all his comments have been addressed, then I will commit this series. Thanks for the patchset. Regards --Rich ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3] xfstests: btrfs tests for basic informational commands @ 2013-03-13 17:47 ` Rich Johnston 0 siblings, 0 replies; 44+ messages in thread From: Rich Johnston @ 2013-03-13 17:47 UTC (permalink / raw) To: Eric Sandeen; +Cc: linux-btrfs, Stefan Behrens, xfs Looks good Eric, but I will wait for Stefan to look at this version to make sure all his comments have been addressed, then I will commit this series. Thanks for the patchset. Regards --Rich _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH 3/3 V2] xfstests: btrfs tests for basic informational commands 2013-03-13 14:57 ` Eric Sandeen @ 2013-03-13 16:38 ` Eric Sandeen -1 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-13 16:38 UTC (permalink / raw) To: Eric Sandeen; +Cc: xfs, linux-btrfs Run basic btrfs information commands in various ways, performing sanity tests of: filesystem show, label, sync, and device stats (sync is included just because it's simple). These are mostly just smoke tests, although for example show by label & UUID should verify that the correct fs was shown. This also adds quite a few new filters to accommodate the output of the new commands. Cc: linux-btrfs@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> --- V2: sort & uniq device stats output to account for variable nrs. of devices. Optionally check that the proper nr. of devices was returned, as well. diff --git a/313 b/313 new file mode 100755 index 0000000..579b0d3 --- /dev/null +++ b/313 @@ -0,0 +1,96 @@ +#! /bin/bash +# FS QA Test No. 313 +# +# run basic btrfs information commands in various ways +# sanity tests: filesystem show, label, sync, and device stats +# +#----------------------------------------------------------------------- +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# +# creator +owner=sandeen@redhat.com + +seq=`basename $0` +echo "== QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common.rc +. ./btrfs.filter + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_supported_os Linux +_require_scratch +_require_scratch_dev_pool + +rm -f $seq.full + +FIRST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` +LAST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $NF}'` +TOTAL_DEVS=`echo $SCRATCH_DEV $SCRATCH_DEV_POOL | wc -w` +LABEL=TestLabel.$seq + +echo "Scratch $SCRATCH_DEV First $FIRST_POOL_DEV last $LAST_POOL_DEV Total $TOTAL_DEVS" > $seq.full + +_scratch_mkfs $SCRATCH_DEV_POOL >> $seq.full 2>&1 || _fail "mkfs failed" + +# These have to be done unmounted...? +echo "== Set filesystem label to $LABEL" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL +echo "== Get filesystem label" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV + +echo "== Mount." +_scratch_mount + +echo "== Show filesystem by label" +$BTRFS_UTIL_PROG filesystem show $LABEL | _filter_btrfs_filesystem_show $TOTAL_DEVS +UUID=`$BTRFS_UTIL_PROG filesystem show $LABEL | grep uuid: | awk '{print $NF}'` + +echo "UUID $UUID" >> $seq.full + +echo "== Show filesystem by UUID" +$BTRFS_UTIL_PROG filesystem show $UUID | _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID + +echo "== Sync filesystem" +$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch + +echo "== Show device stats by mountpoint" +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats $TOTAL_DEVS +echo "== Show device stats by first/scratch dev" +$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats +echo "== Show device stats by second dev" +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" +echo "== Show device stats by last dev" +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" + +# success, all done +status=0 +exit diff --git a/313.out b/313.out new file mode 100644 index 0000000..f513bdd --- /dev/null +++ b/313.out @@ -0,0 +1,41 @@ +== QA output created by 313 +== Set filesystem label to TestLabel.313 +== Get filesystem label +TestLabel.313 +== Mount. +== Show filesystem by label +Label: 'TestLabel.313' uuid: <UUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Show filesystem by UUID +Label: 'TestLabel.313' uuid: <EXACTUUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Sync filesystem +FSSync 'SCRATCH_MNT' +== Show device stats by mountpoint + <NUMDEVS> [SCRATCH_DEV].corruption_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].flush_io_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].generation_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].read_io_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].write_io_errs <NUM> +== Show device stats by first/scratch dev +[SCRATCH_DEV].corruption_errs <NUM> +[SCRATCH_DEV].flush_io_errs <NUM> +[SCRATCH_DEV].generation_errs <NUM> +[SCRATCH_DEV].read_io_errs <NUM> +[SCRATCH_DEV].write_io_errs <NUM> +== Show device stats by second dev +[FIRST_POOL_DEV].write_io_errs 0 +[FIRST_POOL_DEV].read_io_errs 0 +[FIRST_POOL_DEV].flush_io_errs 0 +[FIRST_POOL_DEV].corruption_errs 0 +[FIRST_POOL_DEV].generation_errs 0 +== Show device stats by last dev +[LAST_POOL_DEV].write_io_errs 0 +[LAST_POOL_DEV].read_io_errs 0 +[LAST_POOL_DEV].flush_io_errs 0 +[LAST_POOL_DEV].corruption_errs 0 +[LAST_POOL_DEV].generation_errs 0 diff --git a/btrfs.filter b/btrfs.filter new file mode 100644 index 0000000..8a749bf --- /dev/null +++ b/btrfs.filter @@ -0,0 +1,60 @@ +# Filters for btrfs command output + +. ./common.filter + +# Some, but not all, commands emit "Btrfs <version>" +_filter_btrfs_version() +{ + sed -e "s/^Btrfs.*//g" +} + +_filter_devid() +{ + sed -e "s/\(devid\s\+\)[0-9]\+/\1 <DEVID>/g" +} + +# If passed a number as first arg, filter that number of devices +# If passed a UUID as second arg, filter that exact UUID +_filter_btrfs_filesystem_show() +{ + if [ ! -z $1 ]; then + NUMDEVS=$1 + NUM_SUBST="<EXACTNUM>" + else + NUMDEVS="[0-9]\+" + NUM_SUBST="<NUM>" + fi + + UUID="" + if [ ! -z $2 ]; then + UUID=$2 + fi + + # the uniq collapses all device lines into 1 + _filter_uuid $UUID | _filter_scratch | _filter_scratch_pool | \ + _filter_size | _filter_btrfs_version | _filter_devid | \ + sed -e "s/\(Total devices\) $NUMDEVS/\1 $NUM_SUBST/g" | \ + uniq +} + +# This eliminates all numbers, and shows only unique lines, +# to accomodate a varying nr. of devices. +# If given an argument, make sure we saw that many devices +# in total. +_filter_btrfs_device_stats() +{ + if [ ! -z $1 ]; then + NUMDEVS=$1 + UNIQ_OPT="-c" + else + NUMDEVS="thiswillnotmatch" + UNIQ="" + fi + + _filter_scratch | _filter_scratch_pool | \ + sed -e "s/[0-9]\+$/<NUM>/g" | sort | uniq $UNIQ_OPT | \ + sed -e "s/$NUMDEVS /<NUMDEVS> /g" +} + +# make sure this script returns success +/bin/true diff --git a/common.filter b/common.filter index c854a98..4de9d3d 100644 --- a/common.filter +++ b/common.filter @@ -226,6 +226,13 @@ _filter_scratch() sed -e "s,$SCRATCH_DEV,SCRATCH_DEV,g" -e "s,$SCRATCH_MNT,SCRATCH_MNT,g" } +# Turn any device in the scratch pool into SCRATCH_DEV +_filter_scratch_pool() +{ + FILTER_STRINGS=`echo $SCRATCH_DEV_POOL | sed -e 's/\s\+/\\\|/g'` + sed -e "s,$FILTER_STRINGS,SCRATCH_DEV,g" +} + _filter_spaces() { sed -e 's/ [ ]*/ /g' @@ -238,5 +245,22 @@ _filter_ln() -e "s,failed to create,creating," } +# If given an arg, filter *that* UUID string +# Otherwise look for something that looks like a generic UUID +_filter_uuid() +{ + if [ ! -z $1 ]; then + sed -e "s/\(uuid:\) $UUID/\1 <EXACTUUID>/i" + else + sed -e "s/\(uuid:\) *[0-9a-f-][0-9a-f-]*/\1 <UUID>/i" + fi +} + +# Filter out sizes like 6.14MB etc +_filter_size() +{ + sed -e "s/[0-9\.]\+\s\?[b|k|m|g|t][b]\?/<SIZE>/ig" +} + # make sure this script returns success /bin/true diff --git a/group b/group index 8096968..fc33125 100644 --- a/group +++ b/group @@ -429,3 +429,4 @@ stress 303 aio dangerous ioctl rw stress 304 aio dangerous ioctl rw stress 305 aio dangerous enospc rw stress +313 auto quick ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 3/3 V2] xfstests: btrfs tests for basic informational commands @ 2013-03-13 16:38 ` Eric Sandeen 0 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-13 16:38 UTC (permalink / raw) To: Eric Sandeen; +Cc: linux-btrfs, xfs Run basic btrfs information commands in various ways, performing sanity tests of: filesystem show, label, sync, and device stats (sync is included just because it's simple). These are mostly just smoke tests, although for example show by label & UUID should verify that the correct fs was shown. This also adds quite a few new filters to accommodate the output of the new commands. Cc: linux-btrfs@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> --- V2: sort & uniq device stats output to account for variable nrs. of devices. Optionally check that the proper nr. of devices was returned, as well. diff --git a/313 b/313 new file mode 100755 index 0000000..579b0d3 --- /dev/null +++ b/313 @@ -0,0 +1,96 @@ +#! /bin/bash +# FS QA Test No. 313 +# +# run basic btrfs information commands in various ways +# sanity tests: filesystem show, label, sync, and device stats +# +#----------------------------------------------------------------------- +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# +# creator +owner=sandeen@redhat.com + +seq=`basename $0` +echo "== QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common.rc +. ./btrfs.filter + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_supported_os Linux +_require_scratch +_require_scratch_dev_pool + +rm -f $seq.full + +FIRST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` +LAST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $NF}'` +TOTAL_DEVS=`echo $SCRATCH_DEV $SCRATCH_DEV_POOL | wc -w` +LABEL=TestLabel.$seq + +echo "Scratch $SCRATCH_DEV First $FIRST_POOL_DEV last $LAST_POOL_DEV Total $TOTAL_DEVS" > $seq.full + +_scratch_mkfs $SCRATCH_DEV_POOL >> $seq.full 2>&1 || _fail "mkfs failed" + +# These have to be done unmounted...? +echo "== Set filesystem label to $LABEL" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL +echo "== Get filesystem label" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV + +echo "== Mount." +_scratch_mount + +echo "== Show filesystem by label" +$BTRFS_UTIL_PROG filesystem show $LABEL | _filter_btrfs_filesystem_show $TOTAL_DEVS +UUID=`$BTRFS_UTIL_PROG filesystem show $LABEL | grep uuid: | awk '{print $NF}'` + +echo "UUID $UUID" >> $seq.full + +echo "== Show filesystem by UUID" +$BTRFS_UTIL_PROG filesystem show $UUID | _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID + +echo "== Sync filesystem" +$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch + +echo "== Show device stats by mountpoint" +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats $TOTAL_DEVS +echo "== Show device stats by first/scratch dev" +$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats +echo "== Show device stats by second dev" +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" +echo "== Show device stats by last dev" +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" + +# success, all done +status=0 +exit diff --git a/313.out b/313.out new file mode 100644 index 0000000..f513bdd --- /dev/null +++ b/313.out @@ -0,0 +1,41 @@ +== QA output created by 313 +== Set filesystem label to TestLabel.313 +== Get filesystem label +TestLabel.313 +== Mount. +== Show filesystem by label +Label: 'TestLabel.313' uuid: <UUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Show filesystem by UUID +Label: 'TestLabel.313' uuid: <EXACTUUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Sync filesystem +FSSync 'SCRATCH_MNT' +== Show device stats by mountpoint + <NUMDEVS> [SCRATCH_DEV].corruption_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].flush_io_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].generation_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].read_io_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].write_io_errs <NUM> +== Show device stats by first/scratch dev +[SCRATCH_DEV].corruption_errs <NUM> +[SCRATCH_DEV].flush_io_errs <NUM> +[SCRATCH_DEV].generation_errs <NUM> +[SCRATCH_DEV].read_io_errs <NUM> +[SCRATCH_DEV].write_io_errs <NUM> +== Show device stats by second dev +[FIRST_POOL_DEV].write_io_errs 0 +[FIRST_POOL_DEV].read_io_errs 0 +[FIRST_POOL_DEV].flush_io_errs 0 +[FIRST_POOL_DEV].corruption_errs 0 +[FIRST_POOL_DEV].generation_errs 0 +== Show device stats by last dev +[LAST_POOL_DEV].write_io_errs 0 +[LAST_POOL_DEV].read_io_errs 0 +[LAST_POOL_DEV].flush_io_errs 0 +[LAST_POOL_DEV].corruption_errs 0 +[LAST_POOL_DEV].generation_errs 0 diff --git a/btrfs.filter b/btrfs.filter new file mode 100644 index 0000000..8a749bf --- /dev/null +++ b/btrfs.filter @@ -0,0 +1,60 @@ +# Filters for btrfs command output + +. ./common.filter + +# Some, but not all, commands emit "Btrfs <version>" +_filter_btrfs_version() +{ + sed -e "s/^Btrfs.*//g" +} + +_filter_devid() +{ + sed -e "s/\(devid\s\+\)[0-9]\+/\1 <DEVID>/g" +} + +# If passed a number as first arg, filter that number of devices +# If passed a UUID as second arg, filter that exact UUID +_filter_btrfs_filesystem_show() +{ + if [ ! -z $1 ]; then + NUMDEVS=$1 + NUM_SUBST="<EXACTNUM>" + else + NUMDEVS="[0-9]\+" + NUM_SUBST="<NUM>" + fi + + UUID="" + if [ ! -z $2 ]; then + UUID=$2 + fi + + # the uniq collapses all device lines into 1 + _filter_uuid $UUID | _filter_scratch | _filter_scratch_pool | \ + _filter_size | _filter_btrfs_version | _filter_devid | \ + sed -e "s/\(Total devices\) $NUMDEVS/\1 $NUM_SUBST/g" | \ + uniq +} + +# This eliminates all numbers, and shows only unique lines, +# to accomodate a varying nr. of devices. +# If given an argument, make sure we saw that many devices +# in total. +_filter_btrfs_device_stats() +{ + if [ ! -z $1 ]; then + NUMDEVS=$1 + UNIQ_OPT="-c" + else + NUMDEVS="thiswillnotmatch" + UNIQ="" + fi + + _filter_scratch | _filter_scratch_pool | \ + sed -e "s/[0-9]\+$/<NUM>/g" | sort | uniq $UNIQ_OPT | \ + sed -e "s/$NUMDEVS /<NUMDEVS> /g" +} + +# make sure this script returns success +/bin/true diff --git a/common.filter b/common.filter index c854a98..4de9d3d 100644 --- a/common.filter +++ b/common.filter @@ -226,6 +226,13 @@ _filter_scratch() sed -e "s,$SCRATCH_DEV,SCRATCH_DEV,g" -e "s,$SCRATCH_MNT,SCRATCH_MNT,g" } +# Turn any device in the scratch pool into SCRATCH_DEV +_filter_scratch_pool() +{ + FILTER_STRINGS=`echo $SCRATCH_DEV_POOL | sed -e 's/\s\+/\\\|/g'` + sed -e "s,$FILTER_STRINGS,SCRATCH_DEV,g" +} + _filter_spaces() { sed -e 's/ [ ]*/ /g' @@ -238,5 +245,22 @@ _filter_ln() -e "s,failed to create,creating," } +# If given an arg, filter *that* UUID string +# Otherwise look for something that looks like a generic UUID +_filter_uuid() +{ + if [ ! -z $1 ]; then + sed -e "s/\(uuid:\) $UUID/\1 <EXACTUUID>/i" + else + sed -e "s/\(uuid:\) *[0-9a-f-][0-9a-f-]*/\1 <UUID>/i" + fi +} + +# Filter out sizes like 6.14MB etc +_filter_size() +{ + sed -e "s/[0-9\.]\+\s\?[b|k|m|g|t][b]\?/<SIZE>/ig" +} + # make sure this script returns success /bin/true diff --git a/group b/group index 8096968..fc33125 100644 --- a/group +++ b/group @@ -429,3 +429,4 @@ stress 303 aio dangerous ioctl rw stress 304 aio dangerous ioctl rw stress 305 aio dangerous enospc rw stress +313 auto quick _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 3/3 V3] xfstests: btrfs tests for basic informational commands 2013-03-13 16:38 ` Eric Sandeen @ 2013-03-13 18:53 ` Eric Sandeen -1 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-13 18:53 UTC (permalink / raw) To: Eric Sandeen; +Cc: xfs, linux-btrfs Run basic btrfs information commands in various ways, performing sanity tests of: filesystem show, label, sync, and device stats (sync is included just because it's simple). These are mostly just smoke tests, although for example show by label & UUID should verify that the correct fs was shown. This also adds quite a few new filters to accommodate the output of the new commands. Cc: linux-btrfs@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> --- V2: sort & uniq device stats output to account for variable nrs. of devices. Optionally check that the proper nr. of devices was returned, as well. V3: _filter_uuid needs to pay attention to $1, not hope that the caller has set $UUID. Oops. diff --git a/313 b/313 new file mode 100755 index 0000000..579b0d3 --- /dev/null +++ b/313 @@ -0,0 +1,96 @@ +#! /bin/bash +# FS QA Test No. 313 +# +# run basic btrfs information commands in various ways +# sanity tests: filesystem show, label, sync, and device stats +# +#----------------------------------------------------------------------- +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# +# creator +owner=sandeen@redhat.com + +seq=`basename $0` +echo "== QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common.rc +. ./btrfs.filter + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_supported_os Linux +_require_scratch +_require_scratch_dev_pool + +rm -f $seq.full + +FIRST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` +LAST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $NF}'` +TOTAL_DEVS=`echo $SCRATCH_DEV $SCRATCH_DEV_POOL | wc -w` +LABEL=TestLabel.$seq + +echo "Scratch $SCRATCH_DEV First $FIRST_POOL_DEV last $LAST_POOL_DEV Total $TOTAL_DEVS" > $seq.full + +_scratch_mkfs $SCRATCH_DEV_POOL >> $seq.full 2>&1 || _fail "mkfs failed" + +# These have to be done unmounted...? +echo "== Set filesystem label to $LABEL" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL +echo "== Get filesystem label" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV + +echo "== Mount." +_scratch_mount + +echo "== Show filesystem by label" +$BTRFS_UTIL_PROG filesystem show $LABEL | _filter_btrfs_filesystem_show $TOTAL_DEVS +UUID=`$BTRFS_UTIL_PROG filesystem show $LABEL | grep uuid: | awk '{print $NF}'` + +echo "UUID $UUID" >> $seq.full + +echo "== Show filesystem by UUID" +$BTRFS_UTIL_PROG filesystem show $UUID | _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID + +echo "== Sync filesystem" +$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch + +echo "== Show device stats by mountpoint" +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats $TOTAL_DEVS +echo "== Show device stats by first/scratch dev" +$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats +echo "== Show device stats by second dev" +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" +echo "== Show device stats by last dev" +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" + +# success, all done +status=0 +exit diff --git a/313.out b/313.out new file mode 100644 index 0000000..f513bdd --- /dev/null +++ b/313.out @@ -0,0 +1,41 @@ +== QA output created by 313 +== Set filesystem label to TestLabel.313 +== Get filesystem label +TestLabel.313 +== Mount. +== Show filesystem by label +Label: 'TestLabel.313' uuid: <UUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Show filesystem by UUID +Label: 'TestLabel.313' uuid: <EXACTUUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Sync filesystem +FSSync 'SCRATCH_MNT' +== Show device stats by mountpoint + <NUMDEVS> [SCRATCH_DEV].corruption_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].flush_io_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].generation_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].read_io_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].write_io_errs <NUM> +== Show device stats by first/scratch dev +[SCRATCH_DEV].corruption_errs <NUM> +[SCRATCH_DEV].flush_io_errs <NUM> +[SCRATCH_DEV].generation_errs <NUM> +[SCRATCH_DEV].read_io_errs <NUM> +[SCRATCH_DEV].write_io_errs <NUM> +== Show device stats by second dev +[FIRST_POOL_DEV].write_io_errs 0 +[FIRST_POOL_DEV].read_io_errs 0 +[FIRST_POOL_DEV].flush_io_errs 0 +[FIRST_POOL_DEV].corruption_errs 0 +[FIRST_POOL_DEV].generation_errs 0 +== Show device stats by last dev +[LAST_POOL_DEV].write_io_errs 0 +[LAST_POOL_DEV].read_io_errs 0 +[LAST_POOL_DEV].flush_io_errs 0 +[LAST_POOL_DEV].corruption_errs 0 +[LAST_POOL_DEV].generation_errs 0 diff --git a/btrfs.filter b/btrfs.filter new file mode 100644 index 0000000..8a749bf --- /dev/null +++ b/btrfs.filter @@ -0,0 +1,60 @@ +# Filters for btrfs command output + +. ./common.filter + +# Some, but not all, commands emit "Btrfs <version>" +_filter_btrfs_version() +{ + sed -e "s/^Btrfs.*//g" +} + +_filter_devid() +{ + sed -e "s/\(devid\s\+\)[0-9]\+/\1 <DEVID>/g" +} + +# If passed a number as first arg, filter that number of devices +# If passed a UUID as second arg, filter that exact UUID +_filter_btrfs_filesystem_show() +{ + if [ ! -z $1 ]; then + NUMDEVS=$1 + NUM_SUBST="<EXACTNUM>" + else + NUMDEVS="[0-9]\+" + NUM_SUBST="<NUM>" + fi + + UUID="" + if [ ! -z $2 ]; then + UUID=$2 + fi + + # the uniq collapses all device lines into 1 + _filter_uuid $UUID | _filter_scratch | _filter_scratch_pool | \ + _filter_size | _filter_btrfs_version | _filter_devid | \ + sed -e "s/\(Total devices\) $NUMDEVS/\1 $NUM_SUBST/g" | \ + uniq +} + +# This eliminates all numbers, and shows only unique lines, +# to accomodate a varying nr. of devices. +# If given an argument, make sure we saw that many devices +# in total. +_filter_btrfs_device_stats() +{ + if [ ! -z $1 ]; then + NUMDEVS=$1 + UNIQ_OPT="-c" + else + NUMDEVS="thiswillnotmatch" + UNIQ="" + fi + + _filter_scratch | _filter_scratch_pool | \ + sed -e "s/[0-9]\+$/<NUM>/g" | sort | uniq $UNIQ_OPT | \ + sed -e "s/$NUMDEVS /<NUMDEVS> /g" +} + +# make sure this script returns success +/bin/true diff --git a/common.filter b/common.filter index c854a98..c34809f 100644 --- a/common.filter +++ b/common.filter @@ -226,6 +226,13 @@ _filter_scratch() sed -e "s,$SCRATCH_DEV,SCRATCH_DEV,g" -e "s,$SCRATCH_MNT,SCRATCH_MNT,g" } +# Turn any device in the scratch pool into SCRATCH_DEV +_filter_scratch_pool() +{ + FILTER_STRINGS=`echo $SCRATCH_DEV_POOL | sed -e 's/\s\+/\\\|/g'` + sed -e "s,$FILTER_STRINGS,SCRATCH_DEV,g" +} + _filter_spaces() { sed -e 's/ [ ]*/ /g' @@ -238,5 +245,23 @@ _filter_ln() -e "s,failed to create,creating," } +# If given an arg, filter *that* UUID string +# Otherwise look for something that looks like a generic UUID +_filter_uuid() +{ + if [ ! -z $1 ]; then + UUID=$1 + sed -e "s/\(uuid:\) $UUID/\1 <EXACTUUID>/i" + else + sed -e "s/\(uuid:\) *[0-9a-f-][0-9a-f-]*/\1 <UUID>/i" + fi +} + +# Filter out sizes like 6.14MB etc +_filter_size() +{ + sed -e "s/[0-9\.]\+\s\?[b|k|m|g|t][b]\?/<SIZE>/ig" +} + # make sure this script returns success /bin/true diff --git a/group b/group index 8096968..fcbdfb6 100644 --- a/group +++ b/group @@ -429,3 +429,4 @@ stress 303 aio dangerous ioctl rw stress 304 aio dangerous ioctl rw stress 305 aio dangerous enospc rw stress +313 auto quick ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 3/3 V3] xfstests: btrfs tests for basic informational commands @ 2013-03-13 18:53 ` Eric Sandeen 0 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-13 18:53 UTC (permalink / raw) To: Eric Sandeen; +Cc: linux-btrfs, xfs Run basic btrfs information commands in various ways, performing sanity tests of: filesystem show, label, sync, and device stats (sync is included just because it's simple). These are mostly just smoke tests, although for example show by label & UUID should verify that the correct fs was shown. This also adds quite a few new filters to accommodate the output of the new commands. Cc: linux-btrfs@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> --- V2: sort & uniq device stats output to account for variable nrs. of devices. Optionally check that the proper nr. of devices was returned, as well. V3: _filter_uuid needs to pay attention to $1, not hope that the caller has set $UUID. Oops. diff --git a/313 b/313 new file mode 100755 index 0000000..579b0d3 --- /dev/null +++ b/313 @@ -0,0 +1,96 @@ +#! /bin/bash +# FS QA Test No. 313 +# +# run basic btrfs information commands in various ways +# sanity tests: filesystem show, label, sync, and device stats +# +#----------------------------------------------------------------------- +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# +# creator +owner=sandeen@redhat.com + +seq=`basename $0` +echo "== QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common.rc +. ./btrfs.filter + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_supported_os Linux +_require_scratch +_require_scratch_dev_pool + +rm -f $seq.full + +FIRST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` +LAST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $NF}'` +TOTAL_DEVS=`echo $SCRATCH_DEV $SCRATCH_DEV_POOL | wc -w` +LABEL=TestLabel.$seq + +echo "Scratch $SCRATCH_DEV First $FIRST_POOL_DEV last $LAST_POOL_DEV Total $TOTAL_DEVS" > $seq.full + +_scratch_mkfs $SCRATCH_DEV_POOL >> $seq.full 2>&1 || _fail "mkfs failed" + +# These have to be done unmounted...? +echo "== Set filesystem label to $LABEL" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL +echo "== Get filesystem label" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV + +echo "== Mount." +_scratch_mount + +echo "== Show filesystem by label" +$BTRFS_UTIL_PROG filesystem show $LABEL | _filter_btrfs_filesystem_show $TOTAL_DEVS +UUID=`$BTRFS_UTIL_PROG filesystem show $LABEL | grep uuid: | awk '{print $NF}'` + +echo "UUID $UUID" >> $seq.full + +echo "== Show filesystem by UUID" +$BTRFS_UTIL_PROG filesystem show $UUID | _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID + +echo "== Sync filesystem" +$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch + +echo "== Show device stats by mountpoint" +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats $TOTAL_DEVS +echo "== Show device stats by first/scratch dev" +$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats +echo "== Show device stats by second dev" +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" +echo "== Show device stats by last dev" +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" + +# success, all done +status=0 +exit diff --git a/313.out b/313.out new file mode 100644 index 0000000..f513bdd --- /dev/null +++ b/313.out @@ -0,0 +1,41 @@ +== QA output created by 313 +== Set filesystem label to TestLabel.313 +== Get filesystem label +TestLabel.313 +== Mount. +== Show filesystem by label +Label: 'TestLabel.313' uuid: <UUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Show filesystem by UUID +Label: 'TestLabel.313' uuid: <EXACTUUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Sync filesystem +FSSync 'SCRATCH_MNT' +== Show device stats by mountpoint + <NUMDEVS> [SCRATCH_DEV].corruption_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].flush_io_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].generation_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].read_io_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].write_io_errs <NUM> +== Show device stats by first/scratch dev +[SCRATCH_DEV].corruption_errs <NUM> +[SCRATCH_DEV].flush_io_errs <NUM> +[SCRATCH_DEV].generation_errs <NUM> +[SCRATCH_DEV].read_io_errs <NUM> +[SCRATCH_DEV].write_io_errs <NUM> +== Show device stats by second dev +[FIRST_POOL_DEV].write_io_errs 0 +[FIRST_POOL_DEV].read_io_errs 0 +[FIRST_POOL_DEV].flush_io_errs 0 +[FIRST_POOL_DEV].corruption_errs 0 +[FIRST_POOL_DEV].generation_errs 0 +== Show device stats by last dev +[LAST_POOL_DEV].write_io_errs 0 +[LAST_POOL_DEV].read_io_errs 0 +[LAST_POOL_DEV].flush_io_errs 0 +[LAST_POOL_DEV].corruption_errs 0 +[LAST_POOL_DEV].generation_errs 0 diff --git a/btrfs.filter b/btrfs.filter new file mode 100644 index 0000000..8a749bf --- /dev/null +++ b/btrfs.filter @@ -0,0 +1,60 @@ +# Filters for btrfs command output + +. ./common.filter + +# Some, but not all, commands emit "Btrfs <version>" +_filter_btrfs_version() +{ + sed -e "s/^Btrfs.*//g" +} + +_filter_devid() +{ + sed -e "s/\(devid\s\+\)[0-9]\+/\1 <DEVID>/g" +} + +# If passed a number as first arg, filter that number of devices +# If passed a UUID as second arg, filter that exact UUID +_filter_btrfs_filesystem_show() +{ + if [ ! -z $1 ]; then + NUMDEVS=$1 + NUM_SUBST="<EXACTNUM>" + else + NUMDEVS="[0-9]\+" + NUM_SUBST="<NUM>" + fi + + UUID="" + if [ ! -z $2 ]; then + UUID=$2 + fi + + # the uniq collapses all device lines into 1 + _filter_uuid $UUID | _filter_scratch | _filter_scratch_pool | \ + _filter_size | _filter_btrfs_version | _filter_devid | \ + sed -e "s/\(Total devices\) $NUMDEVS/\1 $NUM_SUBST/g" | \ + uniq +} + +# This eliminates all numbers, and shows only unique lines, +# to accomodate a varying nr. of devices. +# If given an argument, make sure we saw that many devices +# in total. +_filter_btrfs_device_stats() +{ + if [ ! -z $1 ]; then + NUMDEVS=$1 + UNIQ_OPT="-c" + else + NUMDEVS="thiswillnotmatch" + UNIQ="" + fi + + _filter_scratch | _filter_scratch_pool | \ + sed -e "s/[0-9]\+$/<NUM>/g" | sort | uniq $UNIQ_OPT | \ + sed -e "s/$NUMDEVS /<NUMDEVS> /g" +} + +# make sure this script returns success +/bin/true diff --git a/common.filter b/common.filter index c854a98..c34809f 100644 --- a/common.filter +++ b/common.filter @@ -226,6 +226,13 @@ _filter_scratch() sed -e "s,$SCRATCH_DEV,SCRATCH_DEV,g" -e "s,$SCRATCH_MNT,SCRATCH_MNT,g" } +# Turn any device in the scratch pool into SCRATCH_DEV +_filter_scratch_pool() +{ + FILTER_STRINGS=`echo $SCRATCH_DEV_POOL | sed -e 's/\s\+/\\\|/g'` + sed -e "s,$FILTER_STRINGS,SCRATCH_DEV,g" +} + _filter_spaces() { sed -e 's/ [ ]*/ /g' @@ -238,5 +245,23 @@ _filter_ln() -e "s,failed to create,creating," } +# If given an arg, filter *that* UUID string +# Otherwise look for something that looks like a generic UUID +_filter_uuid() +{ + if [ ! -z $1 ]; then + UUID=$1 + sed -e "s/\(uuid:\) $UUID/\1 <EXACTUUID>/i" + else + sed -e "s/\(uuid:\) *[0-9a-f-][0-9a-f-]*/\1 <UUID>/i" + fi +} + +# Filter out sizes like 6.14MB etc +_filter_size() +{ + sed -e "s/[0-9\.]\+\s\?[b|k|m|g|t][b]\?/<SIZE>/ig" +} + # make sure this script returns success /bin/true diff --git a/group b/group index 8096968..fcbdfb6 100644 --- a/group +++ b/group @@ -429,3 +429,4 @@ stress 303 aio dangerous ioctl rw stress 304 aio dangerous ioctl rw stress 305 aio dangerous enospc rw stress +313 auto quick _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply related [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V3] xfstests: btrfs tests for basic informational commands 2013-03-13 18:53 ` Eric Sandeen @ 2013-03-13 19:00 ` Stefan Behrens -1 siblings, 0 replies; 44+ messages in thread From: Stefan Behrens @ 2013-03-13 19:00 UTC (permalink / raw) To: Eric Sandeen; +Cc: xfs, linux-btrfs On Wed, 13 Mar 2013 13:53:51 -0500, Eric Sandeen wrote: > Run basic btrfs information commands in various ways, performing > sanity tests of: filesystem show, label, sync, and device stats > (sync is included just because it's simple). These are mostly > just smoke tests, although for example show by label & UUID > should verify that the correct fs was shown. > > This also adds quite a few new filters to accommodate the output > of the new commands. > > Cc: linux-btrfs@vger.kernel.org > Signed-off-by: Eric Sandeen <sandeen@redhat.com> > --- > > V2: sort & uniq device stats output to account for variable > nrs. of devices. Optionally check that the proper nr. of > devices was returned, as well. > > V3: _filter_uuid needs to pay attention to $1, not hope > that the caller has set $UUID. Oops. > > diff --git a/313 b/313 > new file mode 100755 > index 0000000..579b0d3 > --- /dev/null > +++ b/313 > @@ -0,0 +1,96 @@ > +#! /bin/bash > +# FS QA Test No. 313 > +# > +# run basic btrfs information commands in various ways > +# sanity tests: filesystem show, label, sync, and device stats > +# > +#----------------------------------------------------------------------- > +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +#----------------------------------------------------------------------- > +# > +# creator > +owner=sandeen@redhat.com > + > +seq=`basename $0` > +echo "== QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -f $tmp.* > +} > + > +# get standard environment, filters and checks > +. ./common.rc > +. ./btrfs.filter > + > +# real QA test starts here > + > +# Modify as appropriate. > +_supported_fs btrfs > +_supported_os Linux > +_require_scratch > +_require_scratch_dev_pool > + > +rm -f $seq.full > + > +FIRST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` > +LAST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $NF}'` > +TOTAL_DEVS=`echo $SCRATCH_DEV $SCRATCH_DEV_POOL | wc -w` > +LABEL=TestLabel.$seq > + > +echo "Scratch $SCRATCH_DEV First $FIRST_POOL_DEV last $LAST_POOL_DEV Total $TOTAL_DEVS" > $seq.full > + > +_scratch_mkfs $SCRATCH_DEV_POOL >> $seq.full 2>&1 || _fail "mkfs failed" > + > +# These have to be done unmounted...? > +echo "== Set filesystem label to $LABEL" > +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL > +echo "== Get filesystem label" > +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV > + > +echo "== Mount." > +_scratch_mount > + > +echo "== Show filesystem by label" > +$BTRFS_UTIL_PROG filesystem show $LABEL | _filter_btrfs_filesystem_show $TOTAL_DEVS > +UUID=`$BTRFS_UTIL_PROG filesystem show $LABEL | grep uuid: | awk '{print $NF}'` > + > +echo "UUID $UUID" >> $seq.full > + > +echo "== Show filesystem by UUID" > +$BTRFS_UTIL_PROG filesystem show $UUID | _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID > + > +echo "== Sync filesystem" > +$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch > + > +echo "== Show device stats by mountpoint" > +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats $TOTAL_DEVS > +echo "== Show device stats by first/scratch dev" > +$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats > +echo "== Show device stats by second dev" > +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" > +echo "== Show device stats by last dev" > +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" > + > +# success, all done > +status=0 > +exit > diff --git a/313.out b/313.out > new file mode 100644 > index 0000000..f513bdd > --- /dev/null > +++ b/313.out > @@ -0,0 +1,41 @@ > +== QA output created by 313 > +== Set filesystem label to TestLabel.313 > +== Get filesystem label > +TestLabel.313 > +== Mount. > +== Show filesystem by label > +Label: 'TestLabel.313' uuid: <UUID> > + Total devices <EXACTNUM> FS bytes used <SIZE> > + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV > + > +== Show filesystem by UUID > +Label: 'TestLabel.313' uuid: <EXACTUUID> > + Total devices <EXACTNUM> FS bytes used <SIZE> > + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV > + > +== Sync filesystem > +FSSync 'SCRATCH_MNT' > +== Show device stats by mountpoint > + <NUMDEVS> [SCRATCH_DEV].corruption_errs <NUM> > + <NUMDEVS> [SCRATCH_DEV].flush_io_errs <NUM> > + <NUMDEVS> [SCRATCH_DEV].generation_errs <NUM> > + <NUMDEVS> [SCRATCH_DEV].read_io_errs <NUM> > + <NUMDEVS> [SCRATCH_DEV].write_io_errs <NUM> > +== Show device stats by first/scratch dev > +[SCRATCH_DEV].corruption_errs <NUM> > +[SCRATCH_DEV].flush_io_errs <NUM> > +[SCRATCH_DEV].generation_errs <NUM> > +[SCRATCH_DEV].read_io_errs <NUM> > +[SCRATCH_DEV].write_io_errs <NUM> > +== Show device stats by second dev > +[FIRST_POOL_DEV].write_io_errs 0 > +[FIRST_POOL_DEV].read_io_errs 0 > +[FIRST_POOL_DEV].flush_io_errs 0 > +[FIRST_POOL_DEV].corruption_errs 0 > +[FIRST_POOL_DEV].generation_errs 0 > +== Show device stats by last dev > +[LAST_POOL_DEV].write_io_errs 0 > +[LAST_POOL_DEV].read_io_errs 0 > +[LAST_POOL_DEV].flush_io_errs 0 > +[LAST_POOL_DEV].corruption_errs 0 > +[LAST_POOL_DEV].generation_errs 0 > diff --git a/btrfs.filter b/btrfs.filter > new file mode 100644 > index 0000000..8a749bf > --- /dev/null > +++ b/btrfs.filter > @@ -0,0 +1,60 @@ > +# Filters for btrfs command output > + > +. ./common.filter > + > +# Some, but not all, commands emit "Btrfs <version>" > +_filter_btrfs_version() > +{ > + sed -e "s/^Btrfs.*//g" > +} > + > +_filter_devid() > +{ > + sed -e "s/\(devid\s\+\)[0-9]\+/\1 <DEVID>/g" > +} > + > +# If passed a number as first arg, filter that number of devices > +# If passed a UUID as second arg, filter that exact UUID > +_filter_btrfs_filesystem_show() > +{ > + if [ ! -z $1 ]; then > + NUMDEVS=$1 > + NUM_SUBST="<EXACTNUM>" > + else > + NUMDEVS="[0-9]\+" > + NUM_SUBST="<NUM>" > + fi > + > + UUID="" > + if [ ! -z $2 ]; then > + UUID=$2 > + fi > + > + # the uniq collapses all device lines into 1 > + _filter_uuid $UUID | _filter_scratch | _filter_scratch_pool | \ > + _filter_size | _filter_btrfs_version | _filter_devid | \ > + sed -e "s/\(Total devices\) $NUMDEVS/\1 $NUM_SUBST/g" | \ > + uniq > +} > + > +# This eliminates all numbers, and shows only unique lines, > +# to accomodate a varying nr. of devices. > +# If given an argument, make sure we saw that many devices > +# in total. > +_filter_btrfs_device_stats() > +{ > + if [ ! -z $1 ]; then > + NUMDEVS=$1 > + UNIQ_OPT="-c" > + else > + NUMDEVS="thiswillnotmatch" > + UNIQ="" > + fi > + > + _filter_scratch | _filter_scratch_pool | \ > + sed -e "s/[0-9]\+$/<NUM>/g" | sort | uniq $UNIQ_OPT | \ > + sed -e "s/$NUMDEVS /<NUMDEVS> /g" > +} > + > +# make sure this script returns success > +/bin/true > diff --git a/common.filter b/common.filter > index c854a98..c34809f 100644 > --- a/common.filter > +++ b/common.filter > @@ -226,6 +226,13 @@ _filter_scratch() > sed -e "s,$SCRATCH_DEV,SCRATCH_DEV,g" -e "s,$SCRATCH_MNT,SCRATCH_MNT,g" > } > > +# Turn any device in the scratch pool into SCRATCH_DEV > +_filter_scratch_pool() > +{ > + FILTER_STRINGS=`echo $SCRATCH_DEV_POOL | sed -e 's/\s\+/\\\|/g'` > + sed -e "s,$FILTER_STRINGS,SCRATCH_DEV,g" > +} > + > _filter_spaces() > { > sed -e 's/ [ ]*/ /g' > @@ -238,5 +245,23 @@ _filter_ln() > -e "s,failed to create,creating," > } > > +# If given an arg, filter *that* UUID string > +# Otherwise look for something that looks like a generic UUID > +_filter_uuid() > +{ > + if [ ! -z $1 ]; then > + UUID=$1 > + sed -e "s/\(uuid:\) $UUID/\1 <EXACTUUID>/i" > + else > + sed -e "s/\(uuid:\) *[0-9a-f-][0-9a-f-]*/\1 <UUID>/i" > + fi > +} > + > +# Filter out sizes like 6.14MB etc > +_filter_size() > +{ > + sed -e "s/[0-9\.]\+\s\?[b|k|m|g|t][b]\?/<SIZE>/ig" > +} > + > # make sure this script returns success > /bin/true > diff --git a/group b/group > index 8096968..fcbdfb6 100644 > --- a/group > +++ b/group > @@ -429,3 +429,4 @@ stress > 303 aio dangerous ioctl rw stress > 304 aio dangerous ioctl rw stress > 305 aio dangerous enospc rw stress > +313 auto quick > Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de> ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V3] xfstests: btrfs tests for basic informational commands @ 2013-03-13 19:00 ` Stefan Behrens 0 siblings, 0 replies; 44+ messages in thread From: Stefan Behrens @ 2013-03-13 19:00 UTC (permalink / raw) To: Eric Sandeen; +Cc: linux-btrfs, xfs On Wed, 13 Mar 2013 13:53:51 -0500, Eric Sandeen wrote: > Run basic btrfs information commands in various ways, performing > sanity tests of: filesystem show, label, sync, and device stats > (sync is included just because it's simple). These are mostly > just smoke tests, although for example show by label & UUID > should verify that the correct fs was shown. > > This also adds quite a few new filters to accommodate the output > of the new commands. > > Cc: linux-btrfs@vger.kernel.org > Signed-off-by: Eric Sandeen <sandeen@redhat.com> > --- > > V2: sort & uniq device stats output to account for variable > nrs. of devices. Optionally check that the proper nr. of > devices was returned, as well. > > V3: _filter_uuid needs to pay attention to $1, not hope > that the caller has set $UUID. Oops. > > diff --git a/313 b/313 > new file mode 100755 > index 0000000..579b0d3 > --- /dev/null > +++ b/313 > @@ -0,0 +1,96 @@ > +#! /bin/bash > +# FS QA Test No. 313 > +# > +# run basic btrfs information commands in various ways > +# sanity tests: filesystem show, label, sync, and device stats > +# > +#----------------------------------------------------------------------- > +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +#----------------------------------------------------------------------- > +# > +# creator > +owner=sandeen@redhat.com > + > +seq=`basename $0` > +echo "== QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -f $tmp.* > +} > + > +# get standard environment, filters and checks > +. ./common.rc > +. ./btrfs.filter > + > +# real QA test starts here > + > +# Modify as appropriate. > +_supported_fs btrfs > +_supported_os Linux > +_require_scratch > +_require_scratch_dev_pool > + > +rm -f $seq.full > + > +FIRST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` > +LAST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $NF}'` > +TOTAL_DEVS=`echo $SCRATCH_DEV $SCRATCH_DEV_POOL | wc -w` > +LABEL=TestLabel.$seq > + > +echo "Scratch $SCRATCH_DEV First $FIRST_POOL_DEV last $LAST_POOL_DEV Total $TOTAL_DEVS" > $seq.full > + > +_scratch_mkfs $SCRATCH_DEV_POOL >> $seq.full 2>&1 || _fail "mkfs failed" > + > +# These have to be done unmounted...? > +echo "== Set filesystem label to $LABEL" > +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL > +echo "== Get filesystem label" > +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV > + > +echo "== Mount." > +_scratch_mount > + > +echo "== Show filesystem by label" > +$BTRFS_UTIL_PROG filesystem show $LABEL | _filter_btrfs_filesystem_show $TOTAL_DEVS > +UUID=`$BTRFS_UTIL_PROG filesystem show $LABEL | grep uuid: | awk '{print $NF}'` > + > +echo "UUID $UUID" >> $seq.full > + > +echo "== Show filesystem by UUID" > +$BTRFS_UTIL_PROG filesystem show $UUID | _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID > + > +echo "== Sync filesystem" > +$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch > + > +echo "== Show device stats by mountpoint" > +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats $TOTAL_DEVS > +echo "== Show device stats by first/scratch dev" > +$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats > +echo "== Show device stats by second dev" > +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" > +echo "== Show device stats by last dev" > +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" > + > +# success, all done > +status=0 > +exit > diff --git a/313.out b/313.out > new file mode 100644 > index 0000000..f513bdd > --- /dev/null > +++ b/313.out > @@ -0,0 +1,41 @@ > +== QA output created by 313 > +== Set filesystem label to TestLabel.313 > +== Get filesystem label > +TestLabel.313 > +== Mount. > +== Show filesystem by label > +Label: 'TestLabel.313' uuid: <UUID> > + Total devices <EXACTNUM> FS bytes used <SIZE> > + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV > + > +== Show filesystem by UUID > +Label: 'TestLabel.313' uuid: <EXACTUUID> > + Total devices <EXACTNUM> FS bytes used <SIZE> > + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV > + > +== Sync filesystem > +FSSync 'SCRATCH_MNT' > +== Show device stats by mountpoint > + <NUMDEVS> [SCRATCH_DEV].corruption_errs <NUM> > + <NUMDEVS> [SCRATCH_DEV].flush_io_errs <NUM> > + <NUMDEVS> [SCRATCH_DEV].generation_errs <NUM> > + <NUMDEVS> [SCRATCH_DEV].read_io_errs <NUM> > + <NUMDEVS> [SCRATCH_DEV].write_io_errs <NUM> > +== Show device stats by first/scratch dev > +[SCRATCH_DEV].corruption_errs <NUM> > +[SCRATCH_DEV].flush_io_errs <NUM> > +[SCRATCH_DEV].generation_errs <NUM> > +[SCRATCH_DEV].read_io_errs <NUM> > +[SCRATCH_DEV].write_io_errs <NUM> > +== Show device stats by second dev > +[FIRST_POOL_DEV].write_io_errs 0 > +[FIRST_POOL_DEV].read_io_errs 0 > +[FIRST_POOL_DEV].flush_io_errs 0 > +[FIRST_POOL_DEV].corruption_errs 0 > +[FIRST_POOL_DEV].generation_errs 0 > +== Show device stats by last dev > +[LAST_POOL_DEV].write_io_errs 0 > +[LAST_POOL_DEV].read_io_errs 0 > +[LAST_POOL_DEV].flush_io_errs 0 > +[LAST_POOL_DEV].corruption_errs 0 > +[LAST_POOL_DEV].generation_errs 0 > diff --git a/btrfs.filter b/btrfs.filter > new file mode 100644 > index 0000000..8a749bf > --- /dev/null > +++ b/btrfs.filter > @@ -0,0 +1,60 @@ > +# Filters for btrfs command output > + > +. ./common.filter > + > +# Some, but not all, commands emit "Btrfs <version>" > +_filter_btrfs_version() > +{ > + sed -e "s/^Btrfs.*//g" > +} > + > +_filter_devid() > +{ > + sed -e "s/\(devid\s\+\)[0-9]\+/\1 <DEVID>/g" > +} > + > +# If passed a number as first arg, filter that number of devices > +# If passed a UUID as second arg, filter that exact UUID > +_filter_btrfs_filesystem_show() > +{ > + if [ ! -z $1 ]; then > + NUMDEVS=$1 > + NUM_SUBST="<EXACTNUM>" > + else > + NUMDEVS="[0-9]\+" > + NUM_SUBST="<NUM>" > + fi > + > + UUID="" > + if [ ! -z $2 ]; then > + UUID=$2 > + fi > + > + # the uniq collapses all device lines into 1 > + _filter_uuid $UUID | _filter_scratch | _filter_scratch_pool | \ > + _filter_size | _filter_btrfs_version | _filter_devid | \ > + sed -e "s/\(Total devices\) $NUMDEVS/\1 $NUM_SUBST/g" | \ > + uniq > +} > + > +# This eliminates all numbers, and shows only unique lines, > +# to accomodate a varying nr. of devices. > +# If given an argument, make sure we saw that many devices > +# in total. > +_filter_btrfs_device_stats() > +{ > + if [ ! -z $1 ]; then > + NUMDEVS=$1 > + UNIQ_OPT="-c" > + else > + NUMDEVS="thiswillnotmatch" > + UNIQ="" > + fi > + > + _filter_scratch | _filter_scratch_pool | \ > + sed -e "s/[0-9]\+$/<NUM>/g" | sort | uniq $UNIQ_OPT | \ > + sed -e "s/$NUMDEVS /<NUMDEVS> /g" > +} > + > +# make sure this script returns success > +/bin/true > diff --git a/common.filter b/common.filter > index c854a98..c34809f 100644 > --- a/common.filter > +++ b/common.filter > @@ -226,6 +226,13 @@ _filter_scratch() > sed -e "s,$SCRATCH_DEV,SCRATCH_DEV,g" -e "s,$SCRATCH_MNT,SCRATCH_MNT,g" > } > > +# Turn any device in the scratch pool into SCRATCH_DEV > +_filter_scratch_pool() > +{ > + FILTER_STRINGS=`echo $SCRATCH_DEV_POOL | sed -e 's/\s\+/\\\|/g'` > + sed -e "s,$FILTER_STRINGS,SCRATCH_DEV,g" > +} > + > _filter_spaces() > { > sed -e 's/ [ ]*/ /g' > @@ -238,5 +245,23 @@ _filter_ln() > -e "s,failed to create,creating," > } > > +# If given an arg, filter *that* UUID string > +# Otherwise look for something that looks like a generic UUID > +_filter_uuid() > +{ > + if [ ! -z $1 ]; then > + UUID=$1 > + sed -e "s/\(uuid:\) $UUID/\1 <EXACTUUID>/i" > + else > + sed -e "s/\(uuid:\) *[0-9a-f-][0-9a-f-]*/\1 <UUID>/i" > + fi > +} > + > +# Filter out sizes like 6.14MB etc > +_filter_size() > +{ > + sed -e "s/[0-9\.]\+\s\?[b|k|m|g|t][b]\?/<SIZE>/ig" > +} > + > # make sure this script returns success > /bin/true > diff --git a/group b/group > index 8096968..fcbdfb6 100644 > --- a/group > +++ b/group > @@ -429,3 +429,4 @@ stress > 303 aio dangerous ioctl rw stress > 304 aio dangerous ioctl rw stress > 305 aio dangerous enospc rw stress > +313 auto quick > Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de> _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands 2013-03-13 18:53 ` Eric Sandeen @ 2013-03-13 19:01 ` Eric Sandeen -1 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-13 19:01 UTC (permalink / raw) To: Eric Sandeen; +Cc: linux-btrfs, xfs Run basic btrfs information commands in various ways, performing sanity tests of: filesystem show, label, sync, and device stats (sync is included just because it's simple). These are mostly just smoke tests, although for example show by label & UUID should verify that the correct fs was shown. This also adds quite a few new filters to accommodate the output of the new commands. Cc: linux-btrfs@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> --- V2: sort & uniq device stats output to account for variable nrs. of devices. Optionally check that the proper nr. of devices was returned, as well. V3: _filter_uuid needs to pay attention to $1, not hope that the caller has set $UUID. Oops. V4: fix stats filter to set UNIQ_OPT in both cases, ugh. diff --git a/313 b/313 new file mode 100755 index 0000000..579b0d3 --- /dev/null +++ b/313 @@ -0,0 +1,96 @@ +#! /bin/bash +# FS QA Test No. 313 +# +# run basic btrfs information commands in various ways +# sanity tests: filesystem show, label, sync, and device stats +# +#----------------------------------------------------------------------- +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# +# creator +owner=sandeen@redhat.com + +seq=`basename $0` +echo "== QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common.rc +. ./btrfs.filter + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_supported_os Linux +_require_scratch +_require_scratch_dev_pool + +rm -f $seq.full + +FIRST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` +LAST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $NF}'` +TOTAL_DEVS=`echo $SCRATCH_DEV $SCRATCH_DEV_POOL | wc -w` +LABEL=TestLabel.$seq + +echo "Scratch $SCRATCH_DEV First $FIRST_POOL_DEV last $LAST_POOL_DEV Total $TOTAL_DEVS" > $seq.full + +_scratch_mkfs $SCRATCH_DEV_POOL >> $seq.full 2>&1 || _fail "mkfs failed" + +# These have to be done unmounted...? +echo "== Set filesystem label to $LABEL" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL +echo "== Get filesystem label" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV + +echo "== Mount." +_scratch_mount + +echo "== Show filesystem by label" +$BTRFS_UTIL_PROG filesystem show $LABEL | _filter_btrfs_filesystem_show $TOTAL_DEVS +UUID=`$BTRFS_UTIL_PROG filesystem show $LABEL | grep uuid: | awk '{print $NF}'` + +echo "UUID $UUID" >> $seq.full + +echo "== Show filesystem by UUID" +$BTRFS_UTIL_PROG filesystem show $UUID | _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID + +echo "== Sync filesystem" +$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch + +echo "== Show device stats by mountpoint" +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats $TOTAL_DEVS +echo "== Show device stats by first/scratch dev" +$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats +echo "== Show device stats by second dev" +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" +echo "== Show device stats by last dev" +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" + +# success, all done +status=0 +exit diff --git a/313.out b/313.out new file mode 100644 index 0000000..f513bdd --- /dev/null +++ b/313.out @@ -0,0 +1,41 @@ +== QA output created by 313 +== Set filesystem label to TestLabel.313 +== Get filesystem label +TestLabel.313 +== Mount. +== Show filesystem by label +Label: 'TestLabel.313' uuid: <UUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Show filesystem by UUID +Label: 'TestLabel.313' uuid: <EXACTUUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Sync filesystem +FSSync 'SCRATCH_MNT' +== Show device stats by mountpoint + <NUMDEVS> [SCRATCH_DEV].corruption_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].flush_io_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].generation_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].read_io_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].write_io_errs <NUM> +== Show device stats by first/scratch dev +[SCRATCH_DEV].corruption_errs <NUM> +[SCRATCH_DEV].flush_io_errs <NUM> +[SCRATCH_DEV].generation_errs <NUM> +[SCRATCH_DEV].read_io_errs <NUM> +[SCRATCH_DEV].write_io_errs <NUM> +== Show device stats by second dev +[FIRST_POOL_DEV].write_io_errs 0 +[FIRST_POOL_DEV].read_io_errs 0 +[FIRST_POOL_DEV].flush_io_errs 0 +[FIRST_POOL_DEV].corruption_errs 0 +[FIRST_POOL_DEV].generation_errs 0 +== Show device stats by last dev +[LAST_POOL_DEV].write_io_errs 0 +[LAST_POOL_DEV].read_io_errs 0 +[LAST_POOL_DEV].flush_io_errs 0 +[LAST_POOL_DEV].corruption_errs 0 +[LAST_POOL_DEV].generation_errs 0 diff --git a/btrfs.filter b/btrfs.filter new file mode 100644 index 0000000..8a749bf --- /dev/null +++ b/btrfs.filter @@ -0,0 +1,60 @@ +# Filters for btrfs command output + +. ./common.filter + +# Some, but not all, commands emit "Btrfs <version>" +_filter_btrfs_version() +{ + sed -e "s/^Btrfs.*//g" +} + +_filter_devid() +{ + sed -e "s/\(devid\s\+\)[0-9]\+/\1 <DEVID>/g" +} + +# If passed a number as first arg, filter that number of devices +# If passed a UUID as second arg, filter that exact UUID +_filter_btrfs_filesystem_show() +{ + if [ ! -z $1 ]; then + NUMDEVS=$1 + NUM_SUBST="<EXACTNUM>" + else + NUMDEVS="[0-9]\+" + NUM_SUBST="<NUM>" + fi + + UUID="" + if [ ! -z $2 ]; then + UUID=$2 + fi + + # the uniq collapses all device lines into 1 + _filter_uuid $UUID | _filter_scratch | _filter_scratch_pool | \ + _filter_size | _filter_btrfs_version | _filter_devid | \ + sed -e "s/\(Total devices\) $NUMDEVS/\1 $NUM_SUBST/g" | \ + uniq +} + +# This eliminates all numbers, and shows only unique lines, +# to accomodate a varying nr. of devices. +# If given an argument, make sure we saw that many devices +# in total. +_filter_btrfs_device_stats() +{ + if [ ! -z $1 ]; then + NUMDEVS=$1 + UNIQ_OPT="-c" + else + NUMDEVS="thiswillnotmatch" + UNIQ_OPT="" + fi + + _filter_scratch | _filter_scratch_pool | \ + sed -e "s/[0-9]\+$/<NUM>/g" | sort | uniq $UNIQ_OPT | \ + sed -e "s/$NUMDEVS /<NUMDEVS> /g" +} + +# make sure this script returns success +/bin/true diff --git a/common.filter b/common.filter index c854a98..c34809f 100644 --- a/common.filter +++ b/common.filter @@ -226,6 +226,13 @@ _filter_scratch() sed -e "s,$SCRATCH_DEV,SCRATCH_DEV,g" -e "s,$SCRATCH_MNT,SCRATCH_MNT,g" } +# Turn any device in the scratch pool into SCRATCH_DEV +_filter_scratch_pool() +{ + FILTER_STRINGS=`echo $SCRATCH_DEV_POOL | sed -e 's/\s\+/\\\|/g'` + sed -e "s,$FILTER_STRINGS,SCRATCH_DEV,g" +} + _filter_spaces() { sed -e 's/ [ ]*/ /g' @@ -238,5 +245,23 @@ _filter_ln() -e "s,failed to create,creating," } +# If given an arg, filter *that* UUID string +# Otherwise look for something that looks like a generic UUID +_filter_uuid() +{ + if [ ! -z $1 ]; then + UUID=$1 + sed -e "s/\(uuid:\) $UUID/\1 <EXACTUUID>/i" + else + sed -e "s/\(uuid:\) *[0-9a-f-][0-9a-f-]*/\1 <UUID>/i" + fi +} + +# Filter out sizes like 6.14MB etc +_filter_size() +{ + sed -e "s/[0-9\.]\+\s\?[b|k|m|g|t][b]\?/<SIZE>/ig" +} + # make sure this script returns success /bin/true diff --git a/group b/group index 8096968..fcbdfb6 100644 --- a/group +++ b/group @@ -429,3 +429,4 @@ stress 303 aio dangerous ioctl rw stress 304 aio dangerous ioctl rw stress 305 aio dangerous enospc rw stress +313 auto quick _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands @ 2013-03-13 19:01 ` Eric Sandeen 0 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-13 19:01 UTC (permalink / raw) To: Eric Sandeen; +Cc: linux-btrfs, xfs Run basic btrfs information commands in various ways, performing sanity tests of: filesystem show, label, sync, and device stats (sync is included just because it's simple). These are mostly just smoke tests, although for example show by label & UUID should verify that the correct fs was shown. This also adds quite a few new filters to accommodate the output of the new commands. Cc: linux-btrfs@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> --- V2: sort & uniq device stats output to account for variable nrs. of devices. Optionally check that the proper nr. of devices was returned, as well. V3: _filter_uuid needs to pay attention to $1, not hope that the caller has set $UUID. Oops. V4: fix stats filter to set UNIQ_OPT in both cases, ugh. diff --git a/313 b/313 new file mode 100755 index 0000000..579b0d3 --- /dev/null +++ b/313 @@ -0,0 +1,96 @@ +#! /bin/bash +# FS QA Test No. 313 +# +# run basic btrfs information commands in various ways +# sanity tests: filesystem show, label, sync, and device stats +# +#----------------------------------------------------------------------- +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# +# creator +owner=sandeen@redhat.com + +seq=`basename $0` +echo "== QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common.rc +. ./btrfs.filter + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_supported_os Linux +_require_scratch +_require_scratch_dev_pool + +rm -f $seq.full + +FIRST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` +LAST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $NF}'` +TOTAL_DEVS=`echo $SCRATCH_DEV $SCRATCH_DEV_POOL | wc -w` +LABEL=TestLabel.$seq + +echo "Scratch $SCRATCH_DEV First $FIRST_POOL_DEV last $LAST_POOL_DEV Total $TOTAL_DEVS" > $seq.full + +_scratch_mkfs $SCRATCH_DEV_POOL >> $seq.full 2>&1 || _fail "mkfs failed" + +# These have to be done unmounted...? +echo "== Set filesystem label to $LABEL" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL +echo "== Get filesystem label" +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV + +echo "== Mount." +_scratch_mount + +echo "== Show filesystem by label" +$BTRFS_UTIL_PROG filesystem show $LABEL | _filter_btrfs_filesystem_show $TOTAL_DEVS +UUID=`$BTRFS_UTIL_PROG filesystem show $LABEL | grep uuid: | awk '{print $NF}'` + +echo "UUID $UUID" >> $seq.full + +echo "== Show filesystem by UUID" +$BTRFS_UTIL_PROG filesystem show $UUID | _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID + +echo "== Sync filesystem" +$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch + +echo "== Show device stats by mountpoint" +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats $TOTAL_DEVS +echo "== Show device stats by first/scratch dev" +$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats +echo "== Show device stats by second dev" +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" +echo "== Show device stats by last dev" +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" + +# success, all done +status=0 +exit diff --git a/313.out b/313.out new file mode 100644 index 0000000..f513bdd --- /dev/null +++ b/313.out @@ -0,0 +1,41 @@ +== QA output created by 313 +== Set filesystem label to TestLabel.313 +== Get filesystem label +TestLabel.313 +== Mount. +== Show filesystem by label +Label: 'TestLabel.313' uuid: <UUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Show filesystem by UUID +Label: 'TestLabel.313' uuid: <EXACTUUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + +== Sync filesystem +FSSync 'SCRATCH_MNT' +== Show device stats by mountpoint + <NUMDEVS> [SCRATCH_DEV].corruption_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].flush_io_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].generation_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].read_io_errs <NUM> + <NUMDEVS> [SCRATCH_DEV].write_io_errs <NUM> +== Show device stats by first/scratch dev +[SCRATCH_DEV].corruption_errs <NUM> +[SCRATCH_DEV].flush_io_errs <NUM> +[SCRATCH_DEV].generation_errs <NUM> +[SCRATCH_DEV].read_io_errs <NUM> +[SCRATCH_DEV].write_io_errs <NUM> +== Show device stats by second dev +[FIRST_POOL_DEV].write_io_errs 0 +[FIRST_POOL_DEV].read_io_errs 0 +[FIRST_POOL_DEV].flush_io_errs 0 +[FIRST_POOL_DEV].corruption_errs 0 +[FIRST_POOL_DEV].generation_errs 0 +== Show device stats by last dev +[LAST_POOL_DEV].write_io_errs 0 +[LAST_POOL_DEV].read_io_errs 0 +[LAST_POOL_DEV].flush_io_errs 0 +[LAST_POOL_DEV].corruption_errs 0 +[LAST_POOL_DEV].generation_errs 0 diff --git a/btrfs.filter b/btrfs.filter new file mode 100644 index 0000000..8a749bf --- /dev/null +++ b/btrfs.filter @@ -0,0 +1,60 @@ +# Filters for btrfs command output + +. ./common.filter + +# Some, but not all, commands emit "Btrfs <version>" +_filter_btrfs_version() +{ + sed -e "s/^Btrfs.*//g" +} + +_filter_devid() +{ + sed -e "s/\(devid\s\+\)[0-9]\+/\1 <DEVID>/g" +} + +# If passed a number as first arg, filter that number of devices +# If passed a UUID as second arg, filter that exact UUID +_filter_btrfs_filesystem_show() +{ + if [ ! -z $1 ]; then + NUMDEVS=$1 + NUM_SUBST="<EXACTNUM>" + else + NUMDEVS="[0-9]\+" + NUM_SUBST="<NUM>" + fi + + UUID="" + if [ ! -z $2 ]; then + UUID=$2 + fi + + # the uniq collapses all device lines into 1 + _filter_uuid $UUID | _filter_scratch | _filter_scratch_pool | \ + _filter_size | _filter_btrfs_version | _filter_devid | \ + sed -e "s/\(Total devices\) $NUMDEVS/\1 $NUM_SUBST/g" | \ + uniq +} + +# This eliminates all numbers, and shows only unique lines, +# to accomodate a varying nr. of devices. +# If given an argument, make sure we saw that many devices +# in total. +_filter_btrfs_device_stats() +{ + if [ ! -z $1 ]; then + NUMDEVS=$1 + UNIQ_OPT="-c" + else + NUMDEVS="thiswillnotmatch" + UNIQ_OPT="" + fi + + _filter_scratch | _filter_scratch_pool | \ + sed -e "s/[0-9]\+$/<NUM>/g" | sort | uniq $UNIQ_OPT | \ + sed -e "s/$NUMDEVS /<NUMDEVS> /g" +} + +# make sure this script returns success +/bin/true diff --git a/common.filter b/common.filter index c854a98..c34809f 100644 --- a/common.filter +++ b/common.filter @@ -226,6 +226,13 @@ _filter_scratch() sed -e "s,$SCRATCH_DEV,SCRATCH_DEV,g" -e "s,$SCRATCH_MNT,SCRATCH_MNT,g" } +# Turn any device in the scratch pool into SCRATCH_DEV +_filter_scratch_pool() +{ + FILTER_STRINGS=`echo $SCRATCH_DEV_POOL | sed -e 's/\s\+/\\\|/g'` + sed -e "s,$FILTER_STRINGS,SCRATCH_DEV,g" +} + _filter_spaces() { sed -e 's/ [ ]*/ /g' @@ -238,5 +245,23 @@ _filter_ln() -e "s,failed to create,creating," } +# If given an arg, filter *that* UUID string +# Otherwise look for something that looks like a generic UUID +_filter_uuid() +{ + if [ ! -z $1 ]; then + UUID=$1 + sed -e "s/\(uuid:\) $UUID/\1 <EXACTUUID>/i" + else + sed -e "s/\(uuid:\) *[0-9a-f-][0-9a-f-]*/\1 <UUID>/i" + fi +} + +# Filter out sizes like 6.14MB etc +_filter_size() +{ + sed -e "s/[0-9\.]\+\s\?[b|k|m|g|t][b]\?/<SIZE>/ig" +} + # make sure this script returns success /bin/true diff --git a/group b/group index 8096968..fcbdfb6 100644 --- a/group +++ b/group @@ -429,3 +429,4 @@ stress 303 aio dangerous ioctl rw stress 304 aio dangerous ioctl rw stress 305 aio dangerous enospc rw stress +313 auto quick _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply related [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands 2013-03-13 19:01 ` Eric Sandeen @ 2013-03-14 13:01 ` Rich Johnston -1 siblings, 0 replies; 44+ messages in thread From: Rich Johnston @ 2013-03-14 13:01 UTC (permalink / raw) To: Eric Sandeen; +Cc: Eric Sandeen, linux-btrfs, xfs, Stefan Behrens Stefan, Thanks for reviewing this patch, may I put your Reviewed-by: on this version? Thanks --Rich ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands @ 2013-03-14 13:01 ` Rich Johnston 0 siblings, 0 replies; 44+ messages in thread From: Rich Johnston @ 2013-03-14 13:01 UTC (permalink / raw) To: Eric Sandeen; +Cc: Eric Sandeen, Stefan Behrens, linux-btrfs, xfs Stefan, Thanks for reviewing this patch, may I put your Reviewed-by: on this version? Thanks --Rich _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands 2013-03-14 13:01 ` Rich Johnston @ 2013-03-14 13:35 ` Stefan Behrens -1 siblings, 0 replies; 44+ messages in thread From: Stefan Behrens @ 2013-03-14 13:35 UTC (permalink / raw) To: Rich Johnston; +Cc: Eric Sandeen, linux-btrfs, xfs On Thu, 14 Mar 2013 08:01:54 -0500, Rich Johnston wrote: > Thanks for reviewing this patch, may I put your Reviewed-by: on this > version? Yes. Thanks. Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de> ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands @ 2013-03-14 13:35 ` Stefan Behrens 0 siblings, 0 replies; 44+ messages in thread From: Stefan Behrens @ 2013-03-14 13:35 UTC (permalink / raw) To: Rich Johnston; +Cc: Eric Sandeen, linux-btrfs, xfs On Thu, 14 Mar 2013 08:01:54 -0500, Rich Johnston wrote: > Thanks for reviewing this patch, may I put your Reviewed-by: on this > version? Yes. Thanks. Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de> _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands 2013-03-13 19:01 ` Eric Sandeen @ 2013-03-15 10:16 ` Dave Chinner -1 siblings, 0 replies; 44+ messages in thread From: Dave Chinner @ 2013-03-15 10:16 UTC (permalink / raw) To: Eric Sandeen; +Cc: Eric Sandeen, linux-btrfs, xfs On Wed, Mar 13, 2013 at 02:01:58PM -0500, Eric Sandeen wrote: > Run basic btrfs information commands in various ways, performing > sanity tests of: filesystem show, label, sync, and device stats > (sync is included just because it's simple). These are mostly > just smoke tests, although for example show by label & UUID > should verify that the correct fs was shown. > > This also adds quite a few new filters to accommodate the output > of the new commands. > > Cc: linux-btrfs@vger.kernel.org > Signed-off-by: Eric Sandeen <sandeen@redhat.com> > --- > > V2: sort & uniq device stats output to account for variable > nrs. of devices. Optionally check that the proper nr. of > devices was returned, as well. > > V3: _filter_uuid needs to pay attention to $1, not hope > that the caller has set $UUID. Oops. > > V4: fix stats filter to set UNIQ_OPT in both cases, ugh. Something I just noticed in this commit: > +# get standard environment, filters and checks > +. ./common.rc > +. ./btrfs.filter That should probably have been named "common.filter.btrfs". I found this updating my patchset that moves all the common.* files into a common/ directory.... I'll rename it to common/filter.btrfs.... Cheers, Dave. -- Dave Chinner david@fromorbit.com ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands @ 2013-03-15 10:16 ` Dave Chinner 0 siblings, 0 replies; 44+ messages in thread From: Dave Chinner @ 2013-03-15 10:16 UTC (permalink / raw) To: Eric Sandeen; +Cc: Eric Sandeen, linux-btrfs, xfs On Wed, Mar 13, 2013 at 02:01:58PM -0500, Eric Sandeen wrote: > Run basic btrfs information commands in various ways, performing > sanity tests of: filesystem show, label, sync, and device stats > (sync is included just because it's simple). These are mostly > just smoke tests, although for example show by label & UUID > should verify that the correct fs was shown. > > This also adds quite a few new filters to accommodate the output > of the new commands. > > Cc: linux-btrfs@vger.kernel.org > Signed-off-by: Eric Sandeen <sandeen@redhat.com> > --- > > V2: sort & uniq device stats output to account for variable > nrs. of devices. Optionally check that the proper nr. of > devices was returned, as well. > > V3: _filter_uuid needs to pay attention to $1, not hope > that the caller has set $UUID. Oops. > > V4: fix stats filter to set UNIQ_OPT in both cases, ugh. Something I just noticed in this commit: > +# get standard environment, filters and checks > +. ./common.rc > +. ./btrfs.filter That should probably have been named "common.filter.btrfs". I found this updating my patchset that moves all the common.* files into a common/ directory.... I'll rename it to common/filter.btrfs.... Cheers, Dave. -- Dave Chinner david@fromorbit.com _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands 2013-03-15 10:16 ` Dave Chinner @ 2013-03-15 13:46 ` Eric Sandeen -1 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-15 13:46 UTC (permalink / raw) To: Dave Chinner; +Cc: Eric Sandeen, Eric Sandeen, linux-btrfs, xfs Yep sorry. I figure its always a race in numbers do I don't bother with fixing them up. Should I? On Mar 15, 2013, at 5:16 AM, Dave Chinner <david@fromorbit.com> wrote: > On Wed, Mar 13, 2013 at 02:01:58PM -0500, Eric Sandeen wrote: >> Run basic btrfs information commands in various ways, performing >> sanity tests of: filesystem show, label, sync, and device stats >> (sync is included just because it's simple). These are mostly >> just smoke tests, although for example show by label & UUID >> should verify that the correct fs was shown. >> >> This also adds quite a few new filters to accommodate the output >> of the new commands. >> >> Cc: linux-btrfs@vger.kernel.org >> Signed-off-by: Eric Sandeen <sandeen@redhat.com> >> --- >> >> V2: sort & uniq device stats output to account for variable >> nrs. of devices. Optionally check that the proper nr. of >> devices was returned, as well. >> >> V3: _filter_uuid needs to pay attention to $1, not hope >> that the caller has set $UUID. Oops. >> >> V4: fix stats filter to set UNIQ_OPT in both cases, ugh. > > Something I just noticed in this commit: > >> +# get standard environment, filters and checks >> +. ./common.rc >> +. ./btrfs.filter > > That should probably have been named "common.filter.btrfs". > I found this updating my patchset that moves all the common.* files > into a common/ directory.... > > I'll rename it to common/filter.btrfs.... > > Cheers, > > Dave. > -- > Dave Chinner > david@fromorbit.com > -- > To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands @ 2013-03-15 13:46 ` Eric Sandeen 0 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-15 13:46 UTC (permalink / raw) To: Dave Chinner; +Cc: Eric Sandeen, Eric Sandeen, linux-btrfs, xfs Yep sorry. I figure its always a race in numbers do I don't bother with fixing them up. Should I? On Mar 15, 2013, at 5:16 AM, Dave Chinner <david@fromorbit.com> wrote: > On Wed, Mar 13, 2013 at 02:01:58PM -0500, Eric Sandeen wrote: >> Run basic btrfs information commands in various ways, performing >> sanity tests of: filesystem show, label, sync, and device stats >> (sync is included just because it's simple). These are mostly >> just smoke tests, although for example show by label & UUID >> should verify that the correct fs was shown. >> >> This also adds quite a few new filters to accommodate the output >> of the new commands. >> >> Cc: linux-btrfs@vger.kernel.org >> Signed-off-by: Eric Sandeen <sandeen@redhat.com> >> --- >> >> V2: sort & uniq device stats output to account for variable >> nrs. of devices. Optionally check that the proper nr. of >> devices was returned, as well. >> >> V3: _filter_uuid needs to pay attention to $1, not hope >> that the caller has set $UUID. Oops. >> >> V4: fix stats filter to set UNIQ_OPT in both cases, ugh. > > Something I just noticed in this commit: > >> +# get standard environment, filters and checks >> +. ./common.rc >> +. ./btrfs.filter > > That should probably have been named "common.filter.btrfs". > I found this updating my patchset that moves all the common.* files > into a common/ directory.... > > I'll rename it to common/filter.btrfs.... > > Cheers, > > Dave. > -- > Dave Chinner > david@fromorbit.com > -- > To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands 2013-03-15 13:46 ` Eric Sandeen @ 2013-03-15 14:23 ` Rich Johnston -1 siblings, 0 replies; 44+ messages in thread From: Rich Johnston @ 2013-03-15 14:23 UTC (permalink / raw) To: Eric Sandeen; +Cc: Dave Chinner, Eric Sandeen, Eric Sandeen, linux-btrfs, xfs On 03/15/2013 08:46 AM, Eric Sandeen wrote: > Yep sorry. I figure its always a race in numbers do I don't bother with fixing them up. Should I? > Eric, I was going to revert and resubmit as test 306, is that OK with you? > On Mar 15, 2013, at 5:16 AM, Dave Chinner <david@fromorbit.com> wrote: > >> On Wed, Mar 13, 2013 at 02:01:58PM -0500, Eric Sandeen wrote: >>> Run basic btrfs information commands in various ways, performing >>> sanity tests of: filesystem show, label, sync, and device stats >>> (sync is included just because it's simple). These are mostly >>> just smoke tests, although for example show by label & UUID >>> should verify that the correct fs was shown. >>> >>> This also add2730c49a3s quite a few new filters to accommodate the output >>> of the new commands. >>> >>> Cc: linux-btrfs@vger.kernel.org >>> Signed-off-by: Eric Sandeen <sandeen@redhat.com> >>> --- >>> >>> V2: sort & uniq device stats output to account for variable >>> nrs. of devices. Optionally check that the proper nr. of >>> devices was returned, as well. >>> >>> V3: _filter_uuid needs to pay attention to $1, not hope >>> that the caller has set $UUID. Oops. >>> >>> V4: fix stats filter to set UNIQ_OPT in both cases, ugh. >> >> Something I just noticed in this commit: >> >>> +# get standard environment, filters and checks >>> +. ./common.rc >>> +. ./btrfs.filter >> >> That should probably have been named "common.filter.btrfs". Dave, Do you want me to rename btrfs.filter to common.filter.btrfs when I resubmit this patch? Regards --Rich >> I found this updating my patchset that moves all the common.* files >> into a common/ directory.... >> >> I'll rename it to common/filter.btrfs.... >> >> Cheers, >> >> Dave. >> -- >> Dave Chinner >> david@fromorbit.com >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > _______________________________________________ > xfs mailing list > xfs@oss.sgi.com > http://oss.sgi.com/mailman/listinfo/xfs > ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands @ 2013-03-15 14:23 ` Rich Johnston 0 siblings, 0 replies; 44+ messages in thread From: Rich Johnston @ 2013-03-15 14:23 UTC (permalink / raw) To: Eric Sandeen; +Cc: Eric Sandeen, linux-btrfs, xfs On 03/15/2013 08:46 AM, Eric Sandeen wrote: > Yep sorry. I figure its always a race in numbers do I don't bother with fixing them up. Should I? > Eric, I was going to revert and resubmit as test 306, is that OK with you? > On Mar 15, 2013, at 5:16 AM, Dave Chinner <david@fromorbit.com> wrote: > >> On Wed, Mar 13, 2013 at 02:01:58PM -0500, Eric Sandeen wrote: >>> Run basic btrfs information commands in various ways, performing >>> sanity tests of: filesystem show, label, sync, and device stats >>> (sync is included just because it's simple). These are mostly >>> just smoke tests, although for example show by label & UUID >>> should verify that the correct fs was shown. >>> >>> This also add2730c49a3s quite a few new filters to accommodate the output >>> of the new commands. >>> >>> Cc: linux-btrfs@vger.kernel.org >>> Signed-off-by: Eric Sandeen <sandeen@redhat.com> >>> --- >>> >>> V2: sort & uniq device stats output to account for variable >>> nrs. of devices. Optionally check that the proper nr. of >>> devices was returned, as well. >>> >>> V3: _filter_uuid needs to pay attention to $1, not hope >>> that the caller has set $UUID. Oops. >>> >>> V4: fix stats filter to set UNIQ_OPT in both cases, ugh. >> >> Something I just noticed in this commit: >> >>> +# get standard environment, filters and checks >>> +. ./common.rc >>> +. ./btrfs.filter >> >> That should probably have been named "common.filter.btrfs". Dave, Do you want me to rename btrfs.filter to common.filter.btrfs when I resubmit this patch? Regards --Rich >> I found this updating my patchset that moves all the common.* files >> into a common/ directory.... >> >> I'll rename it to common/filter.btrfs.... >> >> Cheers, >> >> Dave. >> -- >> Dave Chinner >> david@fromorbit.com >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > _______________________________________________ > xfs mailing list > xfs@oss.sgi.com > http://oss.sgi.com/mailman/listinfo/xfs > _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands 2013-03-15 14:23 ` Rich Johnston @ 2013-03-15 14:36 ` Eric Sandeen -1 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-15 14:36 UTC (permalink / raw) To: Rich Johnston; +Cc: Eric Sandeen, Dave Chinner, Eric Sandeen, linux-btrfs, xfs On Mar 15, 2013, at 9:23 AM, Rich Johnston <rjohnston@sgi.com> wrote: > On 03/15/2013 08:46 AM, Eric Sandeen wrote: >> Yep sorry. I figure its always a race in numbers do I don't bother with fixing them up. Should I? > > Eric, > I was going to revert and resubmit as test 306, is that OK with you? > Sure, of course. Thanks, Eric >> On Mar 15, 2013, at 5:16 AM, Dave Chinner <david@fromorbit.com> wrote: >> >>> On Wed, Mar 13, 2013 at 02:01:58PM -0500, Eric Sandeen wrote: >>>> Run basic btrfs information commands in various ways, performing >>>> sanity tests of: filesystem show, label, sync, and device stats >>>> (sync is included just because it's simple). These are mostly >>>> just smoke tests, although for example show by label & UUID >>>> should verify that the correct fs was shown. >>>> >>>> This also add2730c49a3s quite a few new filters to accommodate the output >>>> of the new commands. >>>> >>>> Cc: linux-btrfs@vger.kernel.org >>>> Signed-off-by: Eric Sandeen <sandeen@redhat.com> >>>> --- >>>> >>>> V2: sort & uniq device stats output to account for variable >>>> nrs. of devices. Optionally check that the proper nr. of >>>> devices was returned, as well. >>>> >>>> V3: _filter_uuid needs to pay attention to $1, not hope >>>> that the caller has set $UUID. Oops. >>>> >>>> V4: fix stats filter to set UNIQ_OPT in both cases, ugh. >>> >>> Something I just noticed in this commit: >>> >>>> +# get standard environment, filters and checks >>>> +. ./common.rc >>>> +. ./btrfs.filter >>> >>> That should probably have been named "common.filter.btrfs". > > Dave, > Do you want me to rename btrfs.filter to common.filter.btrfs when I resubmit this patch? > > Regards > --Rich > >>> I found this updating my patchset that moves all the common.* files >>> into a common/ directory.... >>> >>> I'll rename it to common/filter.btrfs.... >>> >>> Cheers, >>> >>> Dave. >>> -- >>> Dave Chinner >>> david@fromorbit.com >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> _______________________________________________ >> xfs mailing list >> xfs@oss.sgi.com >> http://oss.sgi.com/mailman/listinfo/xfs > > ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands @ 2013-03-15 14:36 ` Eric Sandeen 0 siblings, 0 replies; 44+ messages in thread From: Eric Sandeen @ 2013-03-15 14:36 UTC (permalink / raw) To: Rich Johnston; +Cc: Eric Sandeen, Eric Sandeen, linux-btrfs, xfs On Mar 15, 2013, at 9:23 AM, Rich Johnston <rjohnston@sgi.com> wrote: > On 03/15/2013 08:46 AM, Eric Sandeen wrote: >> Yep sorry. I figure its always a race in numbers do I don't bother with fixing them up. Should I? > > Eric, > I was going to revert and resubmit as test 306, is that OK with you? > Sure, of course. Thanks, Eric >> On Mar 15, 2013, at 5:16 AM, Dave Chinner <david@fromorbit.com> wrote: >> >>> On Wed, Mar 13, 2013 at 02:01:58PM -0500, Eric Sandeen wrote: >>>> Run basic btrfs information commands in various ways, performing >>>> sanity tests of: filesystem show, label, sync, and device stats >>>> (sync is included just because it's simple). These are mostly >>>> just smoke tests, although for example show by label & UUID >>>> should verify that the correct fs was shown. >>>> >>>> This also add2730c49a3s quite a few new filters to accommodate the output >>>> of the new commands. >>>> >>>> Cc: linux-btrfs@vger.kernel.org >>>> Signed-off-by: Eric Sandeen <sandeen@redhat.com> >>>> --- >>>> >>>> V2: sort & uniq device stats output to account for variable >>>> nrs. of devices. Optionally check that the proper nr. of >>>> devices was returned, as well. >>>> >>>> V3: _filter_uuid needs to pay attention to $1, not hope >>>> that the caller has set $UUID. Oops. >>>> >>>> V4: fix stats filter to set UNIQ_OPT in both cases, ugh. >>> >>> Something I just noticed in this commit: >>> >>>> +# get standard environment, filters and checks >>>> +. ./common.rc >>>> +. ./btrfs.filter >>> >>> That should probably have been named "common.filter.btrfs". > > Dave, > Do you want me to rename btrfs.filter to common.filter.btrfs when I resubmit this patch? > > Regards > --Rich > >>> I found this updating my patchset that moves all the common.* files >>> into a common/ directory.... >>> >>> I'll rename it to common/filter.btrfs.... >>> >>> Cheers, >>> >>> Dave. >>> -- >>> Dave Chinner >>> david@fromorbit.com >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> _______________________________________________ >> xfs mailing list >> xfs@oss.sgi.com >> http://oss.sgi.com/mailman/listinfo/xfs > > _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands 2013-03-15 14:36 ` Eric Sandeen @ 2013-03-18 13:30 ` Rich Johnston -1 siblings, 0 replies; 44+ messages in thread From: Rich Johnston @ 2013-03-18 13:30 UTC (permalink / raw) To: Eric Sandeen; +Cc: Eric Sandeen, Dave Chinner, Eric Sandeen, linux-btrfs, xfs Dave, Sorry for skipping test numbers, I was going to revert, correct the test number and resubmit this patch. Do you want me to rename btrfs.filter to common.filter.btrfs when I resubmit this patch? Regards --Rich ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands @ 2013-03-18 13:30 ` Rich Johnston 0 siblings, 0 replies; 44+ messages in thread From: Rich Johnston @ 2013-03-18 13:30 UTC (permalink / raw) To: Eric Sandeen; +Cc: Eric Sandeen, Eric Sandeen, linux-btrfs, xfs Dave, Sorry for skipping test numbers, I was going to revert, correct the test number and resubmit this patch. Do you want me to rename btrfs.filter to common.filter.btrfs when I resubmit this patch? Regards --Rich _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands 2013-03-15 14:36 ` Eric Sandeen @ 2013-03-19 14:15 ` Rich Johnston -1 siblings, 0 replies; 44+ messages in thread From: Rich Johnston @ 2013-03-19 14:15 UTC (permalink / raw) To: Eric Sandeen; +Cc: Eric Sandeen, Dave Chinner, Eric Sandeen, linux-btrfs, xfs This has been reverted and recommitted as test 307. Thanks --Rich commit 4f092a2e681c57394a0055a0735b8208bf83ec5f Author: Eric Sandeen <sandeen@sandeen.net> Date: Wed Mar 13 19:01:58 2013 +0000 xfstests: btrfs tests for basic informational commands Run basic btrfs information commands in various ways, performing sanity tests of: filesystem show, label, sync, and device stats (sync is included just because it's simple). These are mostly just smoke tests, although for example show by label & UUID should verify that the correct fs was shown. This also adds quite a few new filters to accommodate the output of the new commands. Cc: linux-btrfs@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Rich Johnston <rjohnston@sgi.com> commit 609b6f18b87bc19c5251c45342e0678cfbf0618c Author: Rich Johnston <rjohnston@sgi.com> Date: Tue Mar 19 08:13:12 2013 -0500 Revert "xfstests: btrfs tests for basic informational commands" This reverts commit 2730c49a3e80426167e6f9984b070883dc51d4b6. Test number was not sequential. Conflicts: group ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 3/3 V4] xfstests: btrfs tests for basic informational commands @ 2013-03-19 14:15 ` Rich Johnston 0 siblings, 0 replies; 44+ messages in thread From: Rich Johnston @ 2013-03-19 14:15 UTC (permalink / raw) To: Eric Sandeen; +Cc: Eric Sandeen, Eric Sandeen, linux-btrfs, xfs This has been reverted and recommitted as test 307. Thanks --Rich commit 4f092a2e681c57394a0055a0735b8208bf83ec5f Author: Eric Sandeen <sandeen@sandeen.net> Date: Wed Mar 13 19:01:58 2013 +0000 xfstests: btrfs tests for basic informational commands Run basic btrfs information commands in various ways, performing sanity tests of: filesystem show, label, sync, and device stats (sync is included just because it's simple). These are mostly just smoke tests, although for example show by label & UUID should verify that the correct fs was shown. This also adds quite a few new filters to accommodate the output of the new commands. Cc: linux-btrfs@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Rich Johnston <rjohnston@sgi.com> commit 609b6f18b87bc19c5251c45342e0678cfbf0618c Author: Rich Johnston <rjohnston@sgi.com> Date: Tue Mar 19 08:13:12 2013 -0500 Revert "xfstests: btrfs tests for basic informational commands" This reverts commit 2730c49a3e80426167e6f9984b070883dc51d4b6. Test number was not sequential. Conflicts: group _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 0/3] xfstests patches 2013-03-13 14:57 [PATCH 0/3] xfstests patches Eric Sandeen ` (2 preceding siblings ...) 2013-03-13 14:57 ` Eric Sandeen @ 2013-03-14 17:16 ` Rich Johnston 2013-03-15 5:43 ` Dave Chinner 3 siblings, 1 reply; 44+ messages in thread From: Rich Johnston @ 2013-03-14 17:16 UTC (permalink / raw) To: Eric Sandeen; +Cc: xfs On 03/13/2013 09:57 AM, Eric Sandeen wrote: > 2 pretty simple ones, and a new btrfs test > > [PATCH 1/3] xfstests: add 274 to the prealloc group > [PATCH 2/3] xfstests: keep newlines out of SCRATCH_DEV_POOL > [PATCH 3/3] xfstests: btrfs tests for basic informational commands > > _______________________________________________ > xfs mailing list > xfs@oss.sgi.com > http://oss.sgi.com/mailman/listinfo/xfs > This series has been committed. Thanks --Rich commit 2730c49a3e80426167e6f9984b070883dc51d4b6 Author: Eric Sandeen <sandeen@sandeen.net> Date: Wed Mar 13 19:01:58 2013 +0000 xfstests: btrfs tests for basic informational commands Run basic btrfs information commands in various ways, performing sanity tests of: filesystem show, label, sync, and device stats (sync is included just because it's simple). These are mostly just smoke tests, although for example show by label & UUID should verify that the correct fs was shown. This also adds quite a few new filters to accommodate the output of the new commands. Cc: linux-btrfs@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: <rjohnston@sgi.com> commit d6e352916fbe835432bac2aa835bac440fe44287 Author: Eric Sandeen <sandeen@redhat.com> Date: Wed Mar 13 14:57:02 2013 +0000 xfstests: keep newlines out of SCRATCH_DEV_POOL SCRATCH_DEV_POOL processing actually takes the first device out for SCRATCH_DEV and leaves the rest in SCRATCH_DEV_POOL. I'm not totally sold on that behavior, but for now, at least don't populate SCRATCH_DEV_POOL with newlines. Cc: linux-btrfs@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: <rjohnston@sgi.com> Signed-off-by: <rjohnston@sgi.com> commit e279134e14800f1d7b34093a93e304b5bed7ec4d Author: Eric Sandeen <sandeen@redhat.com> Date: Wed Mar 13 14:57:01 2013 +0000 xfstests: add 274 to the prealloc group test 274 does preallocation tests but is not in the prealloc group. _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 0/3] xfstests patches 2013-03-14 17:16 ` [PATCH 0/3] xfstests patches Rich Johnston @ 2013-03-15 5:43 ` Dave Chinner 2013-03-15 13:38 ` Rich Johnston 0 siblings, 1 reply; 44+ messages in thread From: Dave Chinner @ 2013-03-15 5:43 UTC (permalink / raw) To: Rich Johnston; +Cc: Eric Sandeen, xfs On Thu, Mar 14, 2013 at 12:16:12PM -0500, Rich Johnston wrote: > On 03/13/2013 09:57 AM, Eric Sandeen wrote: > >2 pretty simple ones, and a new btrfs test > > > >[PATCH 1/3] xfstests: add 274 to the prealloc group > >[PATCH 2/3] xfstests: keep newlines out of SCRATCH_DEV_POOL > >[PATCH 3/3] xfstests: btrfs tests for basic informational commands > > > >_______________________________________________ > >xfs mailing list > >xfs@oss.sgi.com > >http://oss.sgi.com/mailman/listinfo/xfs > > > > This series has been committed. Rich, can you please be careful to check the test numbers being used in patches that are sent to the list before you commit them? > >[PATCH 3/3] xfstests: btrfs tests for basic informational commands This test was numbered 313, and so now we have tests 001-306 and 313 in the repository. I noticed that Another of Eric's recent patches is numbered 315, so it will also need renumbering before commit. -Dave. -- Dave Chinner david@fromorbit.com _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH 0/3] xfstests patches 2013-03-15 5:43 ` Dave Chinner @ 2013-03-15 13:38 ` Rich Johnston 0 siblings, 0 replies; 44+ messages in thread From: Rich Johnston @ 2013-03-15 13:38 UTC (permalink / raw) To: Dave Chinner; +Cc: Eric Sandeen, xfs On 03/15/2013 12:43 AM, Dave Chinner wrote: > On Thu, Mar 14, 2013 at 12:16:12PM -0500, Rich Johnston wrote: >> On 03/13/2013 09:57 AM, Eric Sandeen wrote: >>> 2 pretty simple ones, and a new btrfs test >>> >>> [PATCH 1/3] xfstests: add 274 to the prealloc group >>> [PATCH 2/3] xfstests: keep newlines out of SCRATCH_DEV_POOL >>> [PATCH 3/3] xfstests: btrfs tests for basic informational commands >>> >>> _______________________________________________ >>> xfs mailing list >>> xfs@oss.sgi.com >>> http://oss.sgi.com/mailman/listinfo/xfs >>> >> >> This series has been committed. > > Rich, can you please be careful to check the test numbers being used > in patches that are sent to the list before you commit them? > >>> [PATCH 3/3] xfstests: btrfs tests for basic informational commands > > This test was numbered 313, and so now we have tests 001-306 and 313 > in the repository. I noticed that Another of Eric's recent patches > is numbered 315, so it will also need renumbering before commit. > > -Dave. > Yes I will, sorry it applied so cleanly and I was trying to get it committed before I left for the day I overlooked the numbering. I will revert and recommit it with the correct number 306. Thanks for pointing that out. Regards --Rich _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 44+ messages in thread
end of thread, other threads:[~2013-03-19 14:15 UTC | newest] Thread overview: 44+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-03-13 14:57 [PATCH 0/3] xfstests patches Eric Sandeen 2013-03-13 14:57 ` [PATCH 1/3] xfstests: add 274 to the prealloc group Eric Sandeen 2013-03-13 17:36 ` Rich Johnston 2013-03-13 14:57 ` [PATCH 2/3] xfstests: keep newlines out of SCRATCH_DEV_POOL Eric Sandeen 2013-03-13 14:57 ` Eric Sandeen 2013-03-13 17:43 ` Rich Johnston 2013-03-13 17:43 ` Rich Johnston 2013-03-13 17:45 ` Eric Sandeen 2013-03-13 17:45 ` Eric Sandeen 2013-03-13 14:57 ` [PATCH 3/3] xfstests: btrfs tests for basic informational commands Eric Sandeen 2013-03-13 14:57 ` Eric Sandeen 2013-03-13 15:32 ` Stefan Behrens 2013-03-13 15:32 ` Stefan Behrens 2013-03-13 16:17 ` Eric Sandeen 2013-03-13 16:17 ` Eric Sandeen 2013-03-13 17:47 ` Rich Johnston 2013-03-13 17:47 ` Rich Johnston 2013-03-13 16:38 ` [PATCH 3/3 V2] " Eric Sandeen 2013-03-13 16:38 ` Eric Sandeen 2013-03-13 18:53 ` [PATCH 3/3 V3] " Eric Sandeen 2013-03-13 18:53 ` Eric Sandeen 2013-03-13 19:00 ` Stefan Behrens 2013-03-13 19:00 ` Stefan Behrens 2013-03-13 19:01 ` [PATCH 3/3 V4] " Eric Sandeen 2013-03-13 19:01 ` Eric Sandeen 2013-03-14 13:01 ` Rich Johnston 2013-03-14 13:01 ` Rich Johnston 2013-03-14 13:35 ` Stefan Behrens 2013-03-14 13:35 ` Stefan Behrens 2013-03-15 10:16 ` Dave Chinner 2013-03-15 10:16 ` Dave Chinner 2013-03-15 13:46 ` Eric Sandeen 2013-03-15 13:46 ` Eric Sandeen 2013-03-15 14:23 ` Rich Johnston 2013-03-15 14:23 ` Rich Johnston 2013-03-15 14:36 ` Eric Sandeen 2013-03-15 14:36 ` Eric Sandeen 2013-03-18 13:30 ` Rich Johnston 2013-03-18 13:30 ` Rich Johnston 2013-03-19 14:15 ` Rich Johnston 2013-03-19 14:15 ` Rich Johnston 2013-03-14 17:16 ` [PATCH 0/3] xfstests patches Rich Johnston 2013-03-15 5:43 ` Dave Chinner 2013-03-15 13:38 ` Rich Johnston
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.